blob: 80f65a237e8e1f27d956abcf006a330a1ae6cb33 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* (C) Copyright 2015 Google, Inc
* (C) 2017 Theobroma Systems Design und Consulting GmbH
*/
#include <common.h>
#include <clk-uclass.h>
#include <dm.h>
#include <dt-structs.h>
#include <errno.h>
#include <log.h>
#include <malloc.h>
#include <mapmem.h>
#include <syscon.h>
#include <bitfield.h>
#include <asm/arch-rockchip/clock.h>
#include <asm/arch-rockchip/cru.h>
#include <asm/arch-rockchip/hardware.h>
#include <asm/global_data.h>
#include <dm/device-internal.h>
#include <dm/lists.h>
#include <dt-bindings/clock/rk3399-cru.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/printk.h>
DECLARE_GLOBAL_DATA_PTR;
#if CONFIG_IS_ENABLED(OF_PLATDATA)
struct rk3399_clk_plat {
struct dtd_rockchip_rk3399_cru dtd;
};
struct rk3399_pmuclk_plat {
struct dtd_rockchip_rk3399_pmucru dtd;
};
#endif
struct pll_div {
u32 refdiv;
u32 fbdiv;
u32 postdiv1;
u32 postdiv2;
u32 frac;
};
#define RATE_TO_DIV(input_rate, output_rate) \
((input_rate) / (output_rate) - 1)
#define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1))
#define PLL_DIVISORS(hz, _refdiv, _postdiv1, _postdiv2) {\
.refdiv = _refdiv,\
.fbdiv = (u32)((u64)hz * _refdiv * _postdiv1 * _postdiv2 / OSC_HZ),\
.postdiv1 = _postdiv1, .postdiv2 = _postdiv2};
static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2, 1);
static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2, 2);
#if !defined(CONFIG_SPL_BUILD)
static const struct pll_div ppll_init_cfg = PLL_DIVISORS(PPLL_HZ, 2, 2, 1);
#endif
static const struct pll_div apll_l_1600_cfg = PLL_DIVISORS(1600 * MHz, 3, 1, 1);
static const struct pll_div apll_l_600_cfg = PLL_DIVISORS(600 * MHz, 1, 2, 1);
static const struct pll_div *apll_l_cfgs[] = {
[APLL_L_1600_MHZ] = &apll_l_1600_cfg,
[APLL_L_600_MHZ] = &apll_l_600_cfg,
};
static const struct pll_div apll_b_600_cfg = PLL_DIVISORS(600 * MHz, 1, 2, 1);
static const struct pll_div *apll_b_cfgs[] = {
[APLL_B_600_MHZ] = &apll_b_600_cfg,
};
enum {
/* PLL_CON0 */
PLL_FBDIV_MASK = 0xfff,
PLL_FBDIV_SHIFT = 0,
/* PLL_CON1 */
PLL_POSTDIV2_SHIFT = 12,
PLL_POSTDIV2_MASK = 0x7 << PLL_POSTDIV2_SHIFT,
PLL_POSTDIV1_SHIFT = 8,
PLL_POSTDIV1_MASK = 0x7 << PLL_POSTDIV1_SHIFT,
PLL_REFDIV_MASK = 0x3f,
PLL_REFDIV_SHIFT = 0,
/* PLL_CON2 */
PLL_LOCK_STATUS_SHIFT = 31,
PLL_LOCK_STATUS_MASK = 1 << PLL_LOCK_STATUS_SHIFT,
PLL_FRACDIV_MASK = 0xffffff,
PLL_FRACDIV_SHIFT = 0,
/* PLL_CON3 */
PLL_MODE_SHIFT = 8,
PLL_MODE_MASK = 3 << PLL_MODE_SHIFT,
PLL_MODE_SLOW = 0,
PLL_MODE_NORM,
PLL_MODE_DEEP,
PLL_DSMPD_SHIFT = 3,
PLL_DSMPD_MASK = 1 << PLL_DSMPD_SHIFT,
PLL_INTEGER_MODE = 1,
/* PMUCRU_CLKSEL_CON0 */
PMU_PCLK_DIV_CON_MASK = 0x1f,
PMU_PCLK_DIV_CON_SHIFT = 0,
/* PMUCRU_CLKSEL_CON1 */
SPI3_PLL_SEL_SHIFT = 7,
SPI3_PLL_SEL_MASK = 1 << SPI3_PLL_SEL_SHIFT,
SPI3_PLL_SEL_24M = 0,
SPI3_PLL_SEL_PPLL = 1,
SPI3_DIV_CON_SHIFT = 0x0,
SPI3_DIV_CON_MASK = 0x7f,
/* PMUCRU_CLKSEL_CON2 */
I2C_DIV_CON_MASK = 0x7f,
CLK_I2C8_DIV_CON_SHIFT = 8,
CLK_I2C0_DIV_CON_SHIFT = 0,
/* PMUCRU_CLKSEL_CON3 */
CLK_I2C4_DIV_CON_SHIFT = 0,
/* CLKSEL_CON0 */
ACLKM_CORE_L_DIV_CON_SHIFT = 8,
ACLKM_CORE_L_DIV_CON_MASK = 0x1f << ACLKM_CORE_L_DIV_CON_SHIFT,
CLK_CORE_L_PLL_SEL_SHIFT = 6,
CLK_CORE_L_PLL_SEL_MASK = 3 << CLK_CORE_L_PLL_SEL_SHIFT,
CLK_CORE_L_PLL_SEL_ALPLL = 0x0,
CLK_CORE_L_PLL_SEL_ABPLL = 0x1,
CLK_CORE_L_PLL_SEL_DPLL = 0x10,
CLK_CORE_L_PLL_SEL_GPLL = 0x11,
CLK_CORE_L_DIV_MASK = 0x1f,
CLK_CORE_L_DIV_SHIFT = 0,
/* CLKSEL_CON1 */
PCLK_DBG_L_DIV_SHIFT = 0x8,
PCLK_DBG_L_DIV_MASK = 0x1f << PCLK_DBG_L_DIV_SHIFT,
ATCLK_CORE_L_DIV_SHIFT = 0,
ATCLK_CORE_L_DIV_MASK = 0x1f << ATCLK_CORE_L_DIV_SHIFT,
/* CLKSEL_CON2 */
ACLKM_CORE_B_DIV_CON_SHIFT = 8,
ACLKM_CORE_B_DIV_CON_MASK = 0x1f << ACLKM_CORE_B_DIV_CON_SHIFT,
CLK_CORE_B_PLL_SEL_SHIFT = 6,
CLK_CORE_B_PLL_SEL_MASK = 3 << CLK_CORE_B_PLL_SEL_SHIFT,
CLK_CORE_B_PLL_SEL_ALPLL = 0x0,
CLK_CORE_B_PLL_SEL_ABPLL = 0x1,
CLK_CORE_B_PLL_SEL_DPLL = 0x10,
CLK_CORE_B_PLL_SEL_GPLL = 0x11,
CLK_CORE_B_DIV_MASK = 0x1f,
CLK_CORE_B_DIV_SHIFT = 0,
/* CLKSEL_CON3 */
PCLK_DBG_B_DIV_SHIFT = 0x8,
PCLK_DBG_B_DIV_MASK = 0x1f << PCLK_DBG_B_DIV_SHIFT,
ATCLK_CORE_B_DIV_SHIFT = 0,
ATCLK_CORE_B_DIV_MASK = 0x1f << ATCLK_CORE_B_DIV_SHIFT,
/* CLKSEL_CON14 */
PCLK_PERIHP_DIV_CON_SHIFT = 12,
PCLK_PERIHP_DIV_CON_MASK = 0x7 << PCLK_PERIHP_DIV_CON_SHIFT,
HCLK_PERIHP_DIV_CON_SHIFT = 8,
HCLK_PERIHP_DIV_CON_MASK = 3 << HCLK_PERIHP_DIV_CON_SHIFT,
ACLK_PERIHP_PLL_SEL_SHIFT = 7,
ACLK_PERIHP_PLL_SEL_MASK = 1 << ACLK_PERIHP_PLL_SEL_SHIFT,
ACLK_PERIHP_PLL_SEL_CPLL = 0,
ACLK_PERIHP_PLL_SEL_GPLL = 1,
ACLK_PERIHP_DIV_CON_SHIFT = 0,
ACLK_PERIHP_DIV_CON_MASK = 0x1f,
/* CLKSEL_CON21 */
ACLK_EMMC_PLL_SEL_SHIFT = 7,
ACLK_EMMC_PLL_SEL_MASK = 0x1 << ACLK_EMMC_PLL_SEL_SHIFT,
ACLK_EMMC_PLL_SEL_GPLL = 0x1,
ACLK_EMMC_DIV_CON_SHIFT = 0,
ACLK_EMMC_DIV_CON_MASK = 0x1f,
/* CLKSEL_CON22 */
CLK_EMMC_PLL_SHIFT = 8,
CLK_EMMC_PLL_MASK = 0x7 << CLK_EMMC_PLL_SHIFT,
CLK_EMMC_PLL_SEL_GPLL = 0x1,
CLK_EMMC_PLL_SEL_24M = 0x5,
CLK_EMMC_DIV_CON_SHIFT = 0,
CLK_EMMC_DIV_CON_MASK = 0x7f << CLK_EMMC_DIV_CON_SHIFT,
/* CLKSEL_CON23 */
PCLK_PERILP0_DIV_CON_SHIFT = 12,
PCLK_PERILP0_DIV_CON_MASK = 0x7 << PCLK_PERILP0_DIV_CON_SHIFT,
HCLK_PERILP0_DIV_CON_SHIFT = 8,
HCLK_PERILP0_DIV_CON_MASK = 3 << HCLK_PERILP0_DIV_CON_SHIFT,
ACLK_PERILP0_PLL_SEL_SHIFT = 7,
ACLK_PERILP0_PLL_SEL_MASK = 1 << ACLK_PERILP0_PLL_SEL_SHIFT,
ACLK_PERILP0_PLL_SEL_CPLL = 0,
ACLK_PERILP0_PLL_SEL_GPLL = 1,
ACLK_PERILP0_DIV_CON_SHIFT = 0,
ACLK_PERILP0_DIV_CON_MASK = 0x1f,
/* CLKSEL_CON25 */
PCLK_PERILP1_DIV_CON_SHIFT = 8,
PCLK_PERILP1_DIV_CON_MASK = 0x7 << PCLK_PERILP1_DIV_CON_SHIFT,
HCLK_PERILP1_PLL_SEL_SHIFT = 7,
HCLK_PERILP1_PLL_SEL_MASK = 1 << HCLK_PERILP1_PLL_SEL_SHIFT,
HCLK_PERILP1_PLL_SEL_CPLL = 0,
HCLK_PERILP1_PLL_SEL_GPLL = 1,
HCLK_PERILP1_DIV_CON_SHIFT = 0,
HCLK_PERILP1_DIV_CON_MASK = 0x1f,
/* CLKSEL_CON26 */
CLK_SARADC_DIV_CON_SHIFT = 8,
CLK_SARADC_DIV_CON_MASK = GENMASK(15, 8),
CLK_SARADC_DIV_CON_WIDTH = 8,
/* CLKSEL_CON27 */
CLK_TSADC_SEL_X24M = 0x0,
CLK_TSADC_SEL_SHIFT = 15,
CLK_TSADC_SEL_MASK = 1 << CLK_TSADC_SEL_SHIFT,
CLK_TSADC_DIV_CON_SHIFT = 0,
CLK_TSADC_DIV_CON_MASK = 0x3ff,
/* CLKSEL_CON47 & CLKSEL_CON48 */
ACLK_VOP_PLL_SEL_SHIFT = 6,
ACLK_VOP_PLL_SEL_MASK = 0x3 << ACLK_VOP_PLL_SEL_SHIFT,
ACLK_VOP_PLL_SEL_CPLL = 0x1,
ACLK_VOP_DIV_CON_SHIFT = 0,
ACLK_VOP_DIV_CON_MASK = 0x1f << ACLK_VOP_DIV_CON_SHIFT,
/* CLKSEL_CON49 & CLKSEL_CON50 */
DCLK_VOP_DCLK_SEL_SHIFT = 11,
DCLK_VOP_DCLK_SEL_MASK = 1 << DCLK_VOP_DCLK_SEL_SHIFT,
DCLK_VOP_DCLK_SEL_DIVOUT = 0,
DCLK_VOP_PLL_SEL_SHIFT = 8,
DCLK_VOP_PLL_SEL_MASK = 3 << DCLK_VOP_PLL_SEL_SHIFT,
DCLK_VOP_PLL_SEL_VPLL = 0,
DCLK_VOP_DIV_CON_MASK = 0xff,
DCLK_VOP_DIV_CON_SHIFT = 0,
/* CLKSEL_CON57 */
PCLK_ALIVE_DIV_CON_SHIFT = 0,
PCLK_ALIVE_DIV_CON_MASK = 0x1f << PCLK_ALIVE_DIV_CON_SHIFT,
/* CLKSEL_CON58 */
CLK_SPI_PLL_SEL_WIDTH = 1,
CLK_SPI_PLL_SEL_MASK = ((1 < CLK_SPI_PLL_SEL_WIDTH) - 1),
CLK_SPI_PLL_SEL_CPLL = 0,
CLK_SPI_PLL_SEL_GPLL = 1,
CLK_SPI_PLL_DIV_CON_WIDTH = 7,
CLK_SPI_PLL_DIV_CON_MASK = ((1 << CLK_SPI_PLL_DIV_CON_WIDTH) - 1),
CLK_SPI5_PLL_DIV_CON_SHIFT = 8,
CLK_SPI5_PLL_SEL_SHIFT = 15,
/* CLKSEL_CON59 */
CLK_SPI1_PLL_SEL_SHIFT = 15,
CLK_SPI1_PLL_DIV_CON_SHIFT = 8,
CLK_SPI0_PLL_SEL_SHIFT = 7,
CLK_SPI0_PLL_DIV_CON_SHIFT = 0,
/* CLKSEL_CON60 */
CLK_SPI4_PLL_SEL_SHIFT = 15,
CLK_SPI4_PLL_DIV_CON_SHIFT = 8,
CLK_SPI2_PLL_SEL_SHIFT = 7,
CLK_SPI2_PLL_DIV_CON_SHIFT = 0,
/* CLKSEL_CON61 */
CLK_I2C_PLL_SEL_MASK = 1,
CLK_I2C_PLL_SEL_CPLL = 0,
CLK_I2C_PLL_SEL_GPLL = 1,
CLK_I2C5_PLL_SEL_SHIFT = 15,
CLK_I2C5_DIV_CON_SHIFT = 8,
CLK_I2C1_PLL_SEL_SHIFT = 7,
CLK_I2C1_DIV_CON_SHIFT = 0,
/* CLKSEL_CON62 */
CLK_I2C6_PLL_SEL_SHIFT = 15,
CLK_I2C6_DIV_CON_SHIFT = 8,
CLK_I2C2_PLL_SEL_SHIFT = 7,
CLK_I2C2_DIV_CON_SHIFT = 0,
/* CLKSEL_CON63 */
CLK_I2C7_PLL_SEL_SHIFT = 15,
CLK_I2C7_DIV_CON_SHIFT = 8,
CLK_I2C3_PLL_SEL_SHIFT = 7,
CLK_I2C3_DIV_CON_SHIFT = 0,
/* CRU_SOFTRST_CON4 */
RESETN_DDR0_REQ_SHIFT = 8,
RESETN_DDR0_REQ_MASK = 1 << RESETN_DDR0_REQ_SHIFT,
RESETN_DDRPHY0_REQ_SHIFT = 9,
RESETN_DDRPHY0_REQ_MASK = 1 << RESETN_DDRPHY0_REQ_SHIFT,
RESETN_DDR1_REQ_SHIFT = 12,
RESETN_DDR1_REQ_MASK = 1 << RESETN_DDR1_REQ_SHIFT,
RESETN_DDRPHY1_REQ_SHIFT = 13,
RESETN_DDRPHY1_REQ_MASK = 1 << RESETN_DDRPHY1_REQ_SHIFT,
};
#define VCO_MAX_KHZ (3200 * (MHz / KHz))
#define VCO_MIN_KHZ (800 * (MHz / KHz))
#define OUTPUT_MAX_KHZ (3200 * (MHz / KHz))
#define OUTPUT_MIN_KHZ (16 * (MHz / KHz))
/*
* the div restructions of pll in integer mode, these are defined in
* * CRU_*PLL_CON0 or PMUCRU_*PLL_CON0
*/
#define PLL_DIV_MIN 16
#define PLL_DIV_MAX 3200
/*
* How to calculate the PLL(from TRM V0.3 Part 1 Page 63):
* Formulas also embedded within the Fractional PLL Verilog model:
* If DSMPD = 1 (DSM is disabled, "integer mode")
* FOUTVCO = FREF / REFDIV * FBDIV
* FOUTPOSTDIV = FOUTVCO / POSTDIV1 / POSTDIV2
* Where:
* FOUTVCO = Fractional PLL non-divided output frequency
* FOUTPOSTDIV = Fractional PLL divided output frequency
* (output of second post divider)
* FREF = Fractional PLL input reference frequency, (the OSC_HZ 24MHz input)
* REFDIV = Fractional PLL input reference clock divider
* FBDIV = Integer value programmed into feedback divide
*
*/
static void rkclk_set_pll(u32 *pll_con, const struct pll_div *div)
{
/* All 8 PLLs have same VCO and output frequency range restrictions. */
u32 vco_khz = OSC_HZ / 1000 * div->fbdiv / div->refdiv;
u32 output_khz = vco_khz / div->postdiv1 / div->postdiv2;
debug("PLL at %p: fbdiv=%d, refdiv=%d, postdiv1=%d, "
"postdiv2=%d, vco=%u khz, output=%u khz\n",
pll_con, div->fbdiv, div->refdiv, div->postdiv1,
div->postdiv2, vco_khz, output_khz);
assert(vco_khz >= VCO_MIN_KHZ && vco_khz <= VCO_MAX_KHZ &&
output_khz >= OUTPUT_MIN_KHZ && output_khz <= OUTPUT_MAX_KHZ &&
div->fbdiv >= PLL_DIV_MIN && div->fbdiv <= PLL_DIV_MAX);
/*
* When power on or changing PLL setting,
* we must force PLL into slow mode to ensure output stable clock.
*/
rk_clrsetreg(&pll_con[3], PLL_MODE_MASK,
PLL_MODE_SLOW << PLL_MODE_SHIFT);
/* use integer mode */
rk_clrsetreg(&pll_con[3], PLL_DSMPD_MASK,
PLL_INTEGER_MODE << PLL_DSMPD_SHIFT);
rk_clrsetreg(&pll_con[0], PLL_FBDIV_MASK,
div->fbdiv << PLL_FBDIV_SHIFT);
rk_clrsetreg(&pll_con[1],
PLL_POSTDIV2_MASK | PLL_POSTDIV1_MASK |
PLL_REFDIV_MASK | PLL_REFDIV_SHIFT,
(div->postdiv2 << PLL_POSTDIV2_SHIFT) |
(div->postdiv1 << PLL_POSTDIV1_SHIFT) |
(div->refdiv << PLL_REFDIV_SHIFT));
/* waiting for pll lock */
while (!(readl(&pll_con[2]) & (1 << PLL_LOCK_STATUS_SHIFT)))
udelay(1);
/* pll enter normal mode */
rk_clrsetreg(&pll_con[3], PLL_MODE_MASK,
PLL_MODE_NORM << PLL_MODE_SHIFT);
}
static int pll_para_config(u32 freq_hz, struct pll_div *div)
{
u32 ref_khz = OSC_HZ / KHz, refdiv, fbdiv = 0;
u32 postdiv1, postdiv2 = 1;
u32 fref_khz;
u32 diff_khz, best_diff_khz;
const u32 max_refdiv = 63, max_fbdiv = 3200, min_fbdiv = 16;
const u32 max_postdiv1 = 7, max_postdiv2 = 7;
u32 vco_khz;
u32 freq_khz = freq_hz / KHz;
if (!freq_hz) {
printf("%s: the frequency can't be 0 Hz\n", __func__);
return -1;
}
postdiv1 = DIV_ROUND_UP(VCO_MIN_KHZ, freq_khz);
if (postdiv1 > max_postdiv1) {
postdiv2 = DIV_ROUND_UP(postdiv1, max_postdiv1);
postdiv1 = DIV_ROUND_UP(postdiv1, postdiv2);
}
vco_khz = freq_khz * postdiv1 * postdiv2;
if (vco_khz < VCO_MIN_KHZ || vco_khz > VCO_MAX_KHZ ||
postdiv2 > max_postdiv2) {
printf("%s: Cannot find out a supported VCO"
" for Frequency (%uHz).\n", __func__, freq_hz);
return -1;
}
div->postdiv1 = postdiv1;
div->postdiv2 = postdiv2;
best_diff_khz = vco_khz;
for (refdiv = 1; refdiv < max_refdiv && best_diff_khz; refdiv++) {
fref_khz = ref_khz / refdiv;
fbdiv = vco_khz / fref_khz;
if (fbdiv >= max_fbdiv || fbdiv <= min_fbdiv)
continue;
diff_khz = vco_khz - fbdiv * fref_khz;
if (fbdiv + 1 < max_fbdiv && diff_khz > fref_khz / 2) {
fbdiv++;
diff_khz = fref_khz - diff_khz;
}
if (diff_khz >= best_diff_khz)
continue;
best_diff_khz = diff_khz;
div->refdiv = refdiv;
div->fbdiv = fbdiv;
}
if (best_diff_khz > 4 * (MHz / KHz)) {
printf("%s: Failed to match output frequency %u, "
"difference is %u Hz,exceed 4MHZ\n", __func__, freq_hz,
best_diff_khz * KHz);
return -1;
}
return 0;
}
void rk3399_configure_cpu_l(struct rockchip_cru *cru,
enum apll_l_frequencies apll_l_freq)
{
u32 aclkm_div;
u32 pclk_dbg_div;
u32 atclk_div;
/* Setup cluster L */
rkclk_set_pll(&cru->apll_l_con[0], apll_l_cfgs[apll_l_freq]);
aclkm_div = LPLL_HZ / ACLKM_CORE_L_HZ - 1;
assert((aclkm_div + 1) * ACLKM_CORE_L_HZ == LPLL_HZ &&
aclkm_div < 0x1f);
pclk_dbg_div = LPLL_HZ / PCLK_DBG_L_HZ - 1;
assert((pclk_dbg_div + 1) * PCLK_DBG_L_HZ == LPLL_HZ &&
pclk_dbg_div < 0x1f);
atclk_div = LPLL_HZ / ATCLK_CORE_L_HZ - 1;
assert((atclk_div + 1) * ATCLK_CORE_L_HZ == LPLL_HZ &&
atclk_div < 0x1f);
rk_clrsetreg(&cru->clksel_con[0],
ACLKM_CORE_L_DIV_CON_MASK | CLK_CORE_L_PLL_SEL_MASK |
CLK_CORE_L_DIV_MASK,
aclkm_div << ACLKM_CORE_L_DIV_CON_SHIFT |
CLK_CORE_L_PLL_SEL_ALPLL << CLK_CORE_L_PLL_SEL_SHIFT |
0 << CLK_CORE_L_DIV_SHIFT);
rk_clrsetreg(&cru->clksel_con[1],
PCLK_DBG_L_DIV_MASK | ATCLK_CORE_L_DIV_MASK,
pclk_dbg_div << PCLK_DBG_L_DIV_SHIFT |
atclk_div << ATCLK_CORE_L_DIV_SHIFT);
}
void rk3399_configure_cpu_b(struct rockchip_cru *cru,
enum apll_b_frequencies apll_b_freq)
{
u32 aclkm_div;
u32 pclk_dbg_div;
u32 atclk_div;
/* Setup cluster B */
rkclk_set_pll(&cru->apll_b_con[0], apll_b_cfgs[apll_b_freq]);
aclkm_div = BPLL_HZ / ACLKM_CORE_B_HZ - 1;
assert((aclkm_div + 1) * ACLKM_CORE_B_HZ == BPLL_HZ &&
aclkm_div < 0x1f);
pclk_dbg_div = BPLL_HZ / PCLK_DBG_B_HZ - 1;
assert((pclk_dbg_div + 1) * PCLK_DBG_B_HZ == BPLL_HZ &&
pclk_dbg_div < 0x1f);
atclk_div = BPLL_HZ / ATCLK_CORE_B_HZ - 1;
assert((atclk_div + 1) * ATCLK_CORE_B_HZ == BPLL_HZ &&
atclk_div < 0x1f);
rk_clrsetreg(&cru->clksel_con[2],
ACLKM_CORE_B_DIV_CON_MASK | CLK_CORE_B_PLL_SEL_MASK |
CLK_CORE_B_DIV_MASK,
aclkm_div << ACLKM_CORE_B_DIV_CON_SHIFT |
CLK_CORE_B_PLL_SEL_ABPLL << CLK_CORE_B_PLL_SEL_SHIFT |
0 << CLK_CORE_B_DIV_SHIFT);
rk_clrsetreg(&cru->clksel_con[3],
PCLK_DBG_B_DIV_MASK | ATCLK_CORE_B_DIV_MASK,
pclk_dbg_div << PCLK_DBG_B_DIV_SHIFT |
atclk_div << ATCLK_CORE_B_DIV_SHIFT);
}
#define I2C_CLK_REG_MASK(bus) \
(I2C_DIV_CON_MASK << CLK_I2C ##bus## _DIV_CON_SHIFT | \
CLK_I2C_PLL_SEL_MASK << CLK_I2C ##bus## _PLL_SEL_SHIFT)
#define I2C_CLK_REG_VALUE(bus, clk_div) \
((clk_div - 1) << CLK_I2C ##bus## _DIV_CON_SHIFT | \
CLK_I2C_PLL_SEL_GPLL << CLK_I2C ##bus## _PLL_SEL_SHIFT)
#define I2C_CLK_DIV_VALUE(con, bus) \
((con >> CLK_I2C ##bus## _DIV_CON_SHIFT) & I2C_DIV_CON_MASK)
#define I2C_PMUCLK_REG_MASK(bus) \
(I2C_DIV_CON_MASK << CLK_I2C ##bus## _DIV_CON_SHIFT)
#define I2C_PMUCLK_REG_VALUE(bus, clk_div) \
((clk_div - 1) << CLK_I2C ##bus## _DIV_CON_SHIFT)
static ulong rk3399_i2c_get_clk(struct rockchip_cru *cru, ulong clk_id)
{
u32 div, con;
switch (clk_id) {
case SCLK_I2C1:
con = readl(&cru->clksel_con[61]);
div = I2C_CLK_DIV_VALUE(con, 1);
break;
case SCLK_I2C2:
con = readl(&cru->clksel_con[62]);
div = I2C_CLK_DIV_VALUE(con, 2);
break;
case SCLK_I2C3:
con = readl(&cru->clksel_con[63]);
div = I2C_CLK_DIV_VALUE(con, 3);
break;
case SCLK_I2C5:
con = readl(&cru->clksel_con[61]);
div = I2C_CLK_DIV_VALUE(con, 5);
break;
case SCLK_I2C6:
con = readl(&cru->clksel_con[62]);
div = I2C_CLK_DIV_VALUE(con, 6);
break;
case SCLK_I2C7:
con = readl(&cru->clksel_con[63]);
div = I2C_CLK_DIV_VALUE(con, 7);
break;
default:
printf("do not support this i2c bus\n");
return -EINVAL;
}
return DIV_TO_RATE(GPLL_HZ, div);
}
static ulong rk3399_i2c_set_clk(struct rockchip_cru *cru, ulong clk_id, uint hz)
{
int src_clk_div;
/* i2c0,4,8 src clock from ppll, i2c1,2,3,5,6,7 src clock from gpll*/
src_clk_div = GPLL_HZ / hz;
assert(src_clk_div - 1 < 127);
switch (clk_id) {
case SCLK_I2C1:
rk_clrsetreg(&cru->clksel_con[61], I2C_CLK_REG_MASK(1),
I2C_CLK_REG_VALUE(1, src_clk_div));
break;
case SCLK_I2C2:
rk_clrsetreg(&cru->clksel_con[62], I2C_CLK_REG_MASK(2),
I2C_CLK_REG_VALUE(2, src_clk_div));
break;
case SCLK_I2C3:
rk_clrsetreg(&cru->clksel_con[63], I2C_CLK_REG_MASK(3),
I2C_CLK_REG_VALUE(3, src_clk_div));
break;
case SCLK_I2C5:
rk_clrsetreg(&cru->clksel_con[61], I2C_CLK_REG_MASK(5),
I2C_CLK_REG_VALUE(5, src_clk_div));
break;
case SCLK_I2C6:
rk_clrsetreg(&cru->clksel_con[62], I2C_CLK_REG_MASK(6),
I2C_CLK_REG_VALUE(6, src_clk_div));
break;
case SCLK_I2C7:
rk_clrsetreg(&cru->clksel_con[63], I2C_CLK_REG_MASK(7),
I2C_CLK_REG_VALUE(7, src_clk_div));
break;
default:
printf("do not support this i2c bus\n");
return -EINVAL;
}
return rk3399_i2c_get_clk(cru, clk_id);
}
/*
* RK3399 SPI clocks have a common divider-width (7 bits) and a single bit
* to select either CPLL or GPLL as the clock-parent. The location within
* the enclosing CLKSEL_CON (i.e. div_shift and sel_shift) are variable.
*/
struct spi_clkreg {
u8 reg; /* CLKSEL_CON[reg] register in CRU */
u8 div_shift;
u8 sel_shift;
};
/*
* The entries are numbered relative to their offset from SCLK_SPI0.
*
* Note that SCLK_SPI3 (which is configured via PMUCRU and requires different
* logic is not supported).
*/
static const struct spi_clkreg spi_clkregs[] = {
[0] = { .reg = 59,
.div_shift = CLK_SPI0_PLL_DIV_CON_SHIFT,
.sel_shift = CLK_SPI0_PLL_SEL_SHIFT, },
[1] = { .reg = 59,
.div_shift = CLK_SPI1_PLL_DIV_CON_SHIFT,
.sel_shift = CLK_SPI1_PLL_SEL_SHIFT, },
[2] = { .reg = 60,
.div_shift = CLK_SPI2_PLL_DIV_CON_SHIFT,
.sel_shift = CLK_SPI2_PLL_SEL_SHIFT, },
[3] = { .reg = 60,
.div_shift = CLK_SPI4_PLL_DIV_CON_SHIFT,
.sel_shift = CLK_SPI4_PLL_SEL_SHIFT, },
[4] = { .reg = 58,
.div_shift = CLK_SPI5_PLL_DIV_CON_SHIFT,
.sel_shift = CLK_SPI5_PLL_SEL_SHIFT, },
};
static ulong rk3399_spi_get_clk(struct rockchip_cru *cru, ulong clk_id)
{
const struct spi_clkreg *spiclk = NULL;
u32 div, val;
switch (clk_id) {
case SCLK_SPI0 ... SCLK_SPI5:
spiclk = &spi_clkregs[clk_id - SCLK_SPI0];
break;
default:
pr_err("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
return -EINVAL;
}
val = readl(&cru->clksel_con[spiclk->reg]);
div = bitfield_extract(val, spiclk->div_shift,
CLK_SPI_PLL_DIV_CON_WIDTH);
return DIV_TO_RATE(GPLL_HZ, div);
}
static ulong rk3399_spi_set_clk(struct rockchip_cru *cru, ulong clk_id, uint hz)
{
const struct spi_clkreg *spiclk = NULL;
int src_clk_div;
src_clk_div = DIV_ROUND_UP(GPLL_HZ, hz) - 1;
assert(src_clk_div < 128);
switch (clk_id) {
case SCLK_SPI1 ... SCLK_SPI5:
spiclk = &spi_clkregs[clk_id - SCLK_SPI0];
break;
default:
pr_err("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
return -EINVAL;
}
rk_clrsetreg(&cru->clksel_con[spiclk->reg],
((CLK_SPI_PLL_DIV_CON_MASK << spiclk->div_shift) |
(CLK_SPI_PLL_SEL_GPLL << spiclk->sel_shift)),
((src_clk_div << spiclk->div_shift) |
(CLK_SPI_PLL_SEL_GPLL << spiclk->sel_shift)));
return rk3399_spi_get_clk(cru, clk_id);
}
static ulong rk3399_vop_set_clk(struct rockchip_cru *cru, ulong clk_id, u32 hz)
{
struct pll_div vpll_config = {0};
int aclk_vop = 198 * MHz;
void *aclkreg_addr, *dclkreg_addr;
u32 div;
switch (clk_id) {
case DCLK_VOP0:
aclkreg_addr = &cru->clksel_con[47];
dclkreg_addr = &cru->clksel_con[49];
break;
case DCLK_VOP1:
aclkreg_addr = &cru->clksel_con[48];
dclkreg_addr = &cru->clksel_con[50];
break;
default:
return -EINVAL;
}
/* vop aclk source clk: cpll */
div = CPLL_HZ / aclk_vop;
assert(div - 1 < 32);
rk_clrsetreg(aclkreg_addr,
ACLK_VOP_PLL_SEL_MASK | ACLK_VOP_DIV_CON_MASK,
ACLK_VOP_PLL_SEL_CPLL << ACLK_VOP_PLL_SEL_SHIFT |
(div - 1) << ACLK_VOP_DIV_CON_SHIFT);
/* vop dclk source from vpll, and equals to vpll(means div == 1) */
if (pll_para_config(hz, &vpll_config))
return -1;
rkclk_set_pll(&cru->vpll_con[0], &vpll_config);
rk_clrsetreg(dclkreg_addr,
DCLK_VOP_DCLK_SEL_MASK | DCLK_VOP_PLL_SEL_MASK |
DCLK_VOP_DIV_CON_MASK,
DCLK_VOP_DCLK_SEL_DIVOUT << DCLK_VOP_DCLK_SEL_SHIFT |
DCLK_VOP_PLL_SEL_VPLL << DCLK_VOP_PLL_SEL_SHIFT |
(1 - 1) << DCLK_VOP_DIV_CON_SHIFT);
return hz;
}
static ulong rk3399_mmc_get_clk(struct rockchip_cru *cru, uint clk_id)
{
u32 div, con;
switch (clk_id) {
case HCLK_SDIO:
case SCLK_SDIO:
con = readl(&cru->clksel_con[15]);
/* dwmmc controller have internal div 2 */
div = 2;
break;
case HCLK_SDMMC:
case SCLK_SDMMC:
con = readl(&cru->clksel_con[16]);
/* dwmmc controller have internal div 2 */
div = 2;
break;
case SCLK_EMMC:
con = readl(&cru->clksel_con[22]);
div = 1;
break;
default:
return -EINVAL;
}
div *= (con & CLK_EMMC_DIV_CON_MASK) >> CLK_EMMC_DIV_CON_SHIFT;
if ((con & CLK_EMMC_PLL_MASK) >> CLK_EMMC_PLL_SHIFT
== CLK_EMMC_PLL_SEL_24M)
return DIV_TO_RATE(OSC_HZ, div);
else
return DIV_TO_RATE(GPLL_HZ, div);
}
static void rk3399_dwmmc_set_clk(struct rockchip_cru *cru,
unsigned int con, ulong set_rate)
{
/* Select clk_sdmmc source from GPLL by default */
/* mmc clock defaulg div 2 internal, provide double in cru */
int src_clk_div = DIV_ROUND_UP(GPLL_HZ / 2, set_rate);
if (src_clk_div > 128) {
/* use 24MHz source for 400KHz clock */
src_clk_div = DIV_ROUND_UP(OSC_HZ / 2, set_rate);
assert(src_clk_div - 1 < 128);
rk_clrsetreg(&cru->clksel_con[con],
CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK,
CLK_EMMC_PLL_SEL_24M << CLK_EMMC_PLL_SHIFT |
(src_clk_div - 1) << CLK_EMMC_DIV_CON_SHIFT);
} else {
rk_clrsetreg(&cru->clksel_con[con],
CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK,
CLK_EMMC_PLL_SEL_GPLL << CLK_EMMC_PLL_SHIFT |
(src_clk_div - 1) << CLK_EMMC_DIV_CON_SHIFT);
}
}
static ulong rk3399_mmc_set_clk(struct rockchip_cru *cru,
ulong clk_id, ulong set_rate)
{
switch (clk_id) {
case HCLK_SDIO:
case SCLK_SDIO:
rk3399_dwmmc_set_clk(cru, 15, set_rate);
break;
case HCLK_SDMMC:
case SCLK_SDMMC:
rk3399_dwmmc_set_clk(cru, 16, set_rate);
break;
case SCLK_EMMC: {
int aclk_emmc = 198 * MHz;
/* Select aclk_emmc source from GPLL */
int src_clk_div = DIV_ROUND_UP(GPLL_HZ, aclk_emmc);
assert(src_clk_div - 1 < 32);
rk_clrsetreg(&cru->clksel_con[21],
ACLK_EMMC_PLL_SEL_MASK | ACLK_EMMC_DIV_CON_MASK,
ACLK_EMMC_PLL_SEL_GPLL << ACLK_EMMC_PLL_SEL_SHIFT |
(src_clk_div - 1) << ACLK_EMMC_DIV_CON_SHIFT);
/* Select clk_emmc source from GPLL too */
src_clk_div = DIV_ROUND_UP(GPLL_HZ, set_rate);
assert(src_clk_div - 1 < 128);
rk_clrsetreg(&cru->clksel_con[22],
CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK,
CLK_EMMC_PLL_SEL_GPLL << CLK_EMMC_PLL_SHIFT |
(src_clk_div - 1) << CLK_EMMC_DIV_CON_SHIFT);
break;
}
default:
return -EINVAL;
}
return rk3399_mmc_get_clk(cru, clk_id);
}
static ulong rk3399_gmac_set_clk(struct rockchip_cru *cru, ulong rate)
{
ulong ret;
/*
* The RGMII CLK can be derived either from an external "clkin"
* or can be generated from internally by a divider from SCLK_MAC.
*/
if (readl(&cru->clksel_con[19]) & BIT(4)) {
/* An external clock will always generate the right rate... */
ret = rate;
} else {
/*
* No platform uses an internal clock to date.
* Implement this once it becomes necessary and print an error
* if someone tries to use it (while it remains unimplemented).
*/
pr_err("%s: internal clock is UNIMPLEMENTED\n", __func__);
ret = 0;
}
return ret;
}
#define PMUSGRF_DDR_RGN_CON16 0xff330040
static ulong rk3399_ddr_set_clk(struct rockchip_cru *cru,
ulong set_rate)
{
struct pll_div dpll_cfg;
/* IC ECO bug, need to set this register */
writel(0xc000c000, PMUSGRF_DDR_RGN_CON16);
/* clk_ddrc == DPLL = 24MHz / refdiv * fbdiv / postdiv1 / postdiv2 */
switch (set_rate) {
case 50 * MHz:
dpll_cfg = (struct pll_div)
{.refdiv = 2, .fbdiv = 75, .postdiv1 = 3, .postdiv2 = 6};
break;
case 200 * MHz:
dpll_cfg = (struct pll_div)
{.refdiv = 1, .fbdiv = 50, .postdiv1 = 6, .postdiv2 = 1};
break;
case 300 * MHz:
dpll_cfg = (struct pll_div)
{.refdiv = 2, .fbdiv = 100, .postdiv1 = 4, .postdiv2 = 1};
break;
case 400 * MHz:
dpll_cfg = (struct pll_div)
{.refdiv = 1, .fbdiv = 50, .postdiv1 = 3, .postdiv2 = 1};
break;
case 666 * MHz:
dpll_cfg = (struct pll_div)
{.refdiv = 2, .fbdiv = 111, .postdiv1 = 2, .postdiv2 = 1};
break;
case 800 * MHz:
dpll_cfg = (struct pll_div)
{.refdiv = 1, .fbdiv = 100, .postdiv1 = 3, .postdiv2 = 1};
break;
case 933 * MHz:
dpll_cfg = (struct pll_div)
{.refdiv = 1, .fbdiv = 116, .postdiv1 = 3, .postdiv2 = 1};
break;
default:
pr_err("Unsupported SDRAM frequency!,%ld\n", set_rate);
}
rkclk_set_pll(&cru->dpll_con[0], &dpll_cfg);
return set_rate;
}
static ulong rk3399_alive_get_clk(struct rockchip_cru *cru)
{
u32 div, val;
val = readl(&cru->clksel_con[57]);
div = (val & PCLK_ALIVE_DIV_CON_MASK) >>
PCLK_ALIVE_DIV_CON_SHIFT;
return DIV_TO_RATE(GPLL_HZ, div);
}
static ulong rk3399_saradc_get_clk(struct rockchip_cru *cru)
{
u32 div, val;
val = readl(&cru->clksel_con[26]);
div = bitfield_extract(val, CLK_SARADC_DIV_CON_SHIFT,
CLK_SARADC_DIV_CON_WIDTH);
return DIV_TO_RATE(OSC_HZ, div);
}
static ulong rk3399_saradc_set_clk(struct rockchip_cru *cru, uint hz)
{
int src_clk_div;
src_clk_div = DIV_ROUND_UP(OSC_HZ, hz) - 1;
assert(src_clk_div < 128);
rk_clrsetreg(&cru->clksel_con[26],
CLK_SARADC_DIV_CON_MASK,
src_clk_div << CLK_SARADC_DIV_CON_SHIFT);
return rk3399_saradc_get_clk(cru);
}
static ulong rk3399_clk_get_rate(struct clk *clk)
{
struct rk3399_clk_priv *priv = dev_get_priv(clk->dev);
ulong rate = 0;
switch (clk->id) {
case 0 ... 63:
return 0;
case HCLK_SDIO:
case SCLK_SDIO:
case HCLK_SDMMC:
case SCLK_SDMMC:
case SCLK_EMMC:
rate = rk3399_mmc_get_clk(priv->cru, clk->id);
break;
case SCLK_I2C1:
case SCLK_I2C2:
case SCLK_I2C3:
case SCLK_I2C5:
case SCLK_I2C6:
case SCLK_I2C7:
rate = rk3399_i2c_get_clk(priv->cru, clk->id);
break;
case SCLK_SPI0...SCLK_SPI5:
rate = rk3399_spi_get_clk(priv->cru, clk->id);
break;
case SCLK_UART0:
case SCLK_UART1:
case SCLK_UART2:
case SCLK_UART3:
return 24000000;
case PCLK_HDMI_CTRL:
break;
case DCLK_VOP0:
case DCLK_VOP1:
break;
case PCLK_EFUSE1024NS:
break;
case SCLK_SARADC:
rate = rk3399_saradc_get_clk(priv->cru);
break;
case ACLK_VIO:
case ACLK_HDCP:
case ACLK_GIC_PRE:
case PCLK_DDR:
break;
case PCLK_ALIVE:
case PCLK_WDT:
rate = rk3399_alive_get_clk(priv->cru);
break;
default:
log_debug("Unknown clock %lu\n", clk->id);
return -ENOENT;
}
return rate;
}
static ulong rk3399_clk_set_rate(struct clk *clk, ulong rate)
{
struct rk3399_clk_priv *priv = dev_get_priv(clk->dev);
ulong ret = 0;
switch (clk->id) {
case 0 ... 63:
return 0;
case ACLK_PERIHP:
case HCLK_PERIHP:
case PCLK_PERIHP:
return 0;
case ACLK_PERILP0:
case HCLK_PERILP0:
case PCLK_PERILP0:
return 0;
case ACLK_CCI:
return 0;
case HCLK_PERILP1:
case PCLK_PERILP1:
return 0;
case HCLK_SDIO:
case SCLK_SDIO:
case HCLK_SDMMC:
case SCLK_SDMMC:
case SCLK_EMMC:
ret = rk3399_mmc_set_clk(priv->cru, clk->id, rate);
break;
case SCLK_MAC:
ret = rk3399_gmac_set_clk(priv->cru, rate);
break;
case SCLK_I2C1:
case SCLK_I2C2:
case SCLK_I2C3:
case SCLK_I2C5:
case SCLK_I2C6:
case SCLK_I2C7:
ret = rk3399_i2c_set_clk(priv->cru, clk->id, rate);
break;
case SCLK_SPI0...SCLK_SPI5:
ret = rk3399_spi_set_clk(priv->cru, clk->id, rate);
break;
case PCLK_HDMI_CTRL:
case PCLK_VIO_GRF:
/* the PCLK gates for video are enabled by default */
break;
case DCLK_VOP0:
case DCLK_VOP1:
ret = rk3399_vop_set_clk(priv->cru, clk->id, rate);
break;
case ACLK_VOP1:
case HCLK_VOP1:
case HCLK_SD:
case SCLK_UPHY0_TCPDCORE:
case SCLK_UPHY1_TCPDCORE:
/**
* assigned-clocks handling won't require for vopl, so
* return 0 to satisfy clk_set_defaults during device probe.
*/
return 0;
case SCLK_DDRCLK:
ret = rk3399_ddr_set_clk(priv->cru, rate);
break;
case PCLK_EFUSE1024NS:
break;
case SCLK_SARADC:
ret = rk3399_saradc_set_clk(priv->cru, rate);
break;
case ACLK_VIO:
case ACLK_HDCP:
case ACLK_GIC_PRE:
case PCLK_DDR:
return 0;
default:
log_debug("Unknown clock %lu\n", clk->id);
return -ENOENT;
}
return ret;
}
static int __maybe_unused rk3399_gmac_set_parent(struct clk *clk,
struct clk *parent)
{
struct rk3399_clk_priv *priv = dev_get_priv(clk->dev);
const char *clock_output_name;
int ret;
/*
* If the requested parent is in the same clock-controller and
* the id is SCLK_MAC ("clk_gmac"), switch to the internal clock.
*/
if (parent->dev == clk->dev && parent->id == SCLK_MAC) {
debug("%s: switching RGMII to SCLK_MAC\n", __func__);
rk_clrreg(&priv->cru->clksel_con[19], BIT(4));
return 0;
}
/*
* Otherwise, we need to check the clock-output-names of the
* requested parent to see if the requested id is "clkin_gmac".
*/
ret = dev_read_string_index(parent->dev, "clock-output-names",
parent->id, &clock_output_name);
if (ret < 0)
return -ENODATA;
/* If this is "clkin_gmac", switch to the external clock input */
if (!strcmp(clock_output_name, "clkin_gmac")) {
debug("%s: switching RGMII to CLKIN\n", __func__);
rk_setreg(&priv->cru->clksel_con[19], BIT(4));
return 0;
}
return -EINVAL;
}
static int __maybe_unused rk3399_clk_set_parent(struct clk *clk,
struct clk *parent)
{
switch (clk->id) {
case SCLK_RMII_SRC:
return rk3399_gmac_set_parent(clk, parent);
}
debug("%s: unsupported clk %ld\n", __func__, clk->id);
return -ENOENT;
}
static int rk3399_clk_enable(struct clk *clk)
{
struct rk3399_clk_priv *priv = dev_get_priv(clk->dev);
switch (clk->id) {
case SCLK_MAC:
rk_clrreg(&priv->cru->clkgate_con[5], BIT(5));
break;
case SCLK_MAC_RX:
rk_clrreg(&priv->cru->clkgate_con[5], BIT(8));
break;
case SCLK_MAC_TX:
rk_clrreg(&priv->cru->clkgate_con[5], BIT(9));
break;
case SCLK_MACREF:
rk_clrreg(&priv->cru->clkgate_con[5], BIT(7));
break;
case SCLK_MACREF_OUT:
rk_clrreg(&priv->cru->clkgate_con[5], BIT(6));
break;
case SCLK_USB2PHY0_REF:
rk_clrreg(&priv->cru->clkgate_con[6], BIT(5));
break;
case SCLK_USB2PHY1_REF:
rk_clrreg(&priv->cru->clkgate_con[6], BIT(6));
break;
case ACLK_GMAC:
rk_clrreg(&priv->cru->clkgate_con[32], BIT(0));
break;
case PCLK_GMAC:
rk_clrreg(&priv->cru->clkgate_con[32], BIT(2));
break;
case SCLK_USB3OTG0_REF:
rk_clrreg(&priv->cru->clkgate_con[12], BIT(1));
break;
case SCLK_USB3OTG1_REF:
rk_clrreg(&priv->cru->clkgate_con[12], BIT(2));
break;
case SCLK_USB3OTG0_SUSPEND:
rk_clrreg(&priv->cru->clkgate_con[12], BIT(3));
break;
case SCLK_USB3OTG1_SUSPEND:
rk_clrreg(&priv->cru->clkgate_con[12], BIT(4));
break;
case ACLK_USB3OTG0:
rk_clrreg(&priv->cru->clkgate_con[30], BIT(1));
break;
case ACLK_USB3OTG1:
rk_clrreg(&priv->cru->clkgate_con[30], BIT(2));
break;
case ACLK_USB3_RKSOC_AXI_PERF:
rk_clrreg(&priv->cru->clkgate_con[30], BIT(3));
break;
case ACLK_USB3:
rk_clrreg(&priv->cru->clkgate_con[12], BIT(0));
break;
case ACLK_USB3_GRF:
rk_clrreg(&priv->cru->clkgate_con[30], BIT(4));
break;
case HCLK_HOST0:
rk_clrreg(&priv->cru->clksel_con[20], BIT(5));
break;
case HCLK_HOST0_ARB:
rk_clrreg(&priv->cru->clksel_con[20], BIT(6));
break;
case HCLK_HOST1:
rk_clrreg(&priv->cru->clksel_con[20], BIT(7));
break;
case HCLK_HOST1_ARB:
rk_clrreg(&priv->cru->clksel_con[20], BIT(8));
break;
case SCLK_UPHY0_TCPDPHY_REF:
rk_clrreg(&priv->cru->clkgate_con[13], BIT(4));
break;
case SCLK_UPHY0_TCPDCORE:
rk_clrreg(&priv->cru->clkgate_con[13], BIT(5));
break;
case SCLK_UPHY1_TCPDPHY_REF:
rk_clrreg(&priv->cru->clkgate_con[13], BIT(6));
break;
case SCLK_UPHY1_TCPDCORE:
rk_clrreg(&priv->cru->clkgate_con[13], BIT(7));
break;
case SCLK_PCIEPHY_REF:
rk_clrreg(&priv->cru->clksel_con[18], BIT(10));
break;
default:
debug("%s: unsupported clk %ld\n", __func__, clk->id);
return -ENOENT;
}
return 0;
}
static int rk3399_clk_disable(struct clk *clk)
{
struct rk3399_clk_priv *priv = dev_get_priv(clk->dev);
switch (clk->id) {
case SCLK_MAC:
rk_setreg(&priv->cru->clkgate_con[5], BIT(5));
break;
case SCLK_MAC_RX:
rk_setreg(&priv->cru->clkgate_con[5], BIT(8));
break;
case SCLK_MAC_TX:
rk_setreg(&priv->cru->clkgate_con[5], BIT(9));
break;
case SCLK_MACREF:
rk_setreg(&priv->cru->clkgate_con[5], BIT(7));
break;
case SCLK_MACREF_OUT:
rk_setreg(&priv->cru->clkgate_con[5], BIT(6));
break;
case SCLK_USB2PHY0_REF:
rk_setreg(&priv->cru->clkgate_con[6], BIT(5));
break;
case SCLK_USB2PHY1_REF:
rk_setreg(&priv->cru->clkgate_con[6], BIT(6));
break;
case ACLK_GMAC:
rk_setreg(&priv->cru->clkgate_con[32], BIT(0));
break;
case PCLK_GMAC:
rk_setreg(&priv->cru->clkgate_con[32], BIT(2));
break;
case SCLK_USB3OTG0_REF:
rk_setreg(&priv->cru->clkgate_con[12], BIT(1));
break;
case SCLK_USB3OTG1_REF:
rk_setreg(&priv->cru->clkgate_con[12], BIT(2));
break;
case SCLK_USB3OTG0_SUSPEND:
rk_setreg(&priv->cru->clkgate_con[12], BIT(3));
break;
case SCLK_USB3OTG1_SUSPEND:
rk_setreg(&priv->cru->clkgate_con[12], BIT(4));
break;
case ACLK_USB3OTG0:
rk_setreg(&priv->cru->clkgate_con[30], BIT(1));
break;
case ACLK_USB3OTG1:
rk_setreg(&priv->cru->clkgate_con[30], BIT(2));
break;
case ACLK_USB3_RKSOC_AXI_PERF:
rk_setreg(&priv->cru->clkgate_con[30], BIT(3));
break;
case ACLK_USB3:
rk_setreg(&priv->cru->clkgate_con[12], BIT(0));
break;
case ACLK_USB3_GRF:
rk_setreg(&priv->cru->clkgate_con[30], BIT(4));
break;
case HCLK_HOST0:
rk_setreg(&priv->cru->clksel_con[20], BIT(5));
break;
case HCLK_HOST0_ARB:
rk_setreg(&priv->cru->clksel_con[20], BIT(6));
break;
case HCLK_HOST1:
rk_setreg(&priv->cru->clksel_con[20], BIT(7));
break;
case HCLK_HOST1_ARB:
rk_setreg(&priv->cru->clksel_con[20], BIT(8));
break;
case SCLK_UPHY0_TCPDPHY_REF:
rk_setreg(&priv->cru->clkgate_con[13], BIT(4));
break;
case SCLK_UPHY0_TCPDCORE:
rk_setreg(&priv->cru->clkgate_con[13], BIT(5));
break;
case SCLK_UPHY1_TCPDPHY_REF:
rk_setreg(&priv->cru->clkgate_con[13], BIT(6));
break;
case SCLK_UPHY1_TCPDCORE:
rk_setreg(&priv->cru->clkgate_con[13], BIT(7));
break;
case SCLK_PCIEPHY_REF:
rk_clrreg(&priv->cru->clksel_con[18], BIT(10));
break;
default:
debug("%s: unsupported clk %ld\n", __func__, clk->id);
return -ENOENT;
}
return 0;
}
static struct clk_ops rk3399_clk_ops = {
.get_rate = rk3399_clk_get_rate,
.set_rate = rk3399_clk_set_rate,
#if CONFIG_IS_ENABLED(OF_REAL)
.set_parent = rk3399_clk_set_parent,
#endif
.enable = rk3399_clk_enable,
.disable = rk3399_clk_disable,
};
static void rkclk_init(struct rockchip_cru *cru)
{
u32 aclk_div;
u32 hclk_div;
u32 pclk_div;
rk3399_configure_cpu_l(cru, APLL_L_600_MHZ);
rk3399_configure_cpu_b(cru, APLL_B_600_MHZ);
/*
* some cru registers changed by bootrom, we'd better reset them to
* reset/default values described in TRM to avoid confusion in kernel.
* Please consider these three lines as a fix of bootrom bug.
*/
rk_clrsetreg(&cru->clksel_con[12], 0xffff, 0x4101);
rk_clrsetreg(&cru->clksel_con[19], 0xffff, 0x033f);
rk_clrsetreg(&cru->clksel_con[56], 0x0003, 0x0003);
/* configure gpll cpll */
rkclk_set_pll(&cru->gpll_con[0], &gpll_init_cfg);
rkclk_set_pll(&cru->cpll_con[0], &cpll_init_cfg);
/* configure perihp aclk, hclk, pclk */
aclk_div = GPLL_HZ / PERIHP_ACLK_HZ - 1;
assert((aclk_div + 1) * PERIHP_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
hclk_div = PERIHP_ACLK_HZ / PERIHP_HCLK_HZ - 1;
assert((hclk_div + 1) * PERIHP_HCLK_HZ ==
PERIHP_ACLK_HZ && (hclk_div < 0x4));
pclk_div = PERIHP_ACLK_HZ / PERIHP_PCLK_HZ - 1;
assert((pclk_div + 1) * PERIHP_PCLK_HZ ==
PERIHP_ACLK_HZ && (pclk_div < 0x7));
rk_clrsetreg(&cru->clksel_con[14],
PCLK_PERIHP_DIV_CON_MASK | HCLK_PERIHP_DIV_CON_MASK |
ACLK_PERIHP_PLL_SEL_MASK | ACLK_PERIHP_DIV_CON_MASK,
pclk_div << PCLK_PERIHP_DIV_CON_SHIFT |
hclk_div << HCLK_PERIHP_DIV_CON_SHIFT |
ACLK_PERIHP_PLL_SEL_GPLL << ACLK_PERIHP_PLL_SEL_SHIFT |
aclk_div << ACLK_PERIHP_DIV_CON_SHIFT);
/* configure perilp0 aclk, hclk, pclk */
aclk_div = GPLL_HZ / PERILP0_ACLK_HZ - 1;
assert((aclk_div + 1) * PERILP0_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
hclk_div = PERILP0_ACLK_HZ / PERILP0_HCLK_HZ - 1;
assert((hclk_div + 1) * PERILP0_HCLK_HZ ==
PERILP0_ACLK_HZ && (hclk_div < 0x4));
pclk_div = PERILP0_ACLK_HZ / PERILP0_PCLK_HZ - 1;
assert((pclk_div + 1) * PERILP0_PCLK_HZ ==
PERILP0_ACLK_HZ && (pclk_div < 0x7));
rk_clrsetreg(&cru->clksel_con[23],
PCLK_PERILP0_DIV_CON_MASK | HCLK_PERILP0_DIV_CON_MASK |
ACLK_PERILP0_PLL_SEL_MASK | ACLK_PERILP0_DIV_CON_MASK,
pclk_div << PCLK_PERILP0_DIV_CON_SHIFT |
hclk_div << HCLK_PERILP0_DIV_CON_SHIFT |
ACLK_PERILP0_PLL_SEL_GPLL << ACLK_PERILP0_PLL_SEL_SHIFT |
aclk_div << ACLK_PERILP0_DIV_CON_SHIFT);
/* perilp1 hclk select gpll as source */
hclk_div = GPLL_HZ / PERILP1_HCLK_HZ - 1;
assert((hclk_div + 1) * PERILP1_HCLK_HZ ==
GPLL_HZ && (hclk_div < 0x1f));
pclk_div = PERILP1_HCLK_HZ / PERILP1_HCLK_HZ - 1;
assert((pclk_div + 1) * PERILP1_HCLK_HZ ==
PERILP1_HCLK_HZ && (hclk_div < 0x7));
rk_clrsetreg(&cru->clksel_con[25],
PCLK_PERILP1_DIV_CON_MASK | HCLK_PERILP1_DIV_CON_MASK |
HCLK_PERILP1_PLL_SEL_MASK,
pclk_div << PCLK_PERILP1_DIV_CON_SHIFT |
hclk_div << HCLK_PERILP1_DIV_CON_SHIFT |
HCLK_PERILP1_PLL_SEL_GPLL << HCLK_PERILP1_PLL_SEL_SHIFT);
}
static int rk3399_clk_probe(struct udevice *dev)
{
struct rk3399_clk_priv *priv = dev_get_priv(dev);
bool init_clocks = false;
#if CONFIG_IS_ENABLED(OF_PLATDATA)
struct rk3399_clk_plat *plat = dev_get_plat(dev);
priv->cru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]);
#endif
#if defined(CONFIG_SPL_BUILD)
init_clocks = true;
#elif CONFIG_IS_ENABLED(HANDOFF)
if (!(gd->flags & GD_FLG_RELOC)) {
if (!(gd->spl_handoff))
init_clocks = true;
}
#endif
if (init_clocks)
rkclk_init(priv->cru);
return 0;
}
static int rk3399_clk_of_to_plat(struct udevice *dev)
{
if (CONFIG_IS_ENABLED(OF_REAL)) {
struct rk3399_clk_priv *priv = dev_get_priv(dev);
priv->cru = dev_read_addr_ptr(dev);
}
return 0;
}
static int rk3399_clk_bind(struct udevice *dev)
{
int ret;
struct udevice *sys_child;
struct sysreset_reg *priv;
/* The reset driver does not have a device node, so bind it here */
ret = device_bind_driver(dev, "rockchip_sysreset", "sysreset",
&sys_child);
if (ret) {
debug("Warning: No sysreset driver: ret=%d\n", ret);
} else {
priv = malloc(sizeof(struct sysreset_reg));
priv->glb_srst_fst_value = offsetof(struct rockchip_cru,
glb_srst_fst_value);
priv->glb_srst_snd_value = offsetof(struct rockchip_cru,
glb_srst_snd_value);
dev_set_priv(sys_child, priv);
}
#if CONFIG_IS_ENABLED(RESET_ROCKCHIP)
ret = offsetof(struct rockchip_cru, softrst_con[0]);
ret = rockchip_reset_bind(dev, ret, 21);
if (ret)
debug("Warning: software reset driver bind failed\n");
#endif
return 0;
}
static const struct udevice_id rk3399_clk_ids[] = {
{ .compatible = "rockchip,rk3399-cru" },
{ }
};
U_BOOT_DRIVER(clk_rk3399) = {
.name = "rockchip_rk3399_cru",
.id = UCLASS_CLK,
.of_match = rk3399_clk_ids,
.priv_auto = sizeof(struct rk3399_clk_priv),
.of_to_plat = rk3399_clk_of_to_plat,
.ops = &rk3399_clk_ops,
.bind = rk3399_clk_bind,
.probe = rk3399_clk_probe,
#if CONFIG_IS_ENABLED(OF_PLATDATA)
.plat_auto = sizeof(struct rk3399_clk_plat),
#endif
};
static ulong rk3399_i2c_get_pmuclk(struct rk3399_pmucru *pmucru, ulong clk_id)
{
u32 div, con;
switch (clk_id) {
case SCLK_I2C0_PMU:
con = readl(&pmucru->pmucru_clksel[2]);
div = I2C_CLK_DIV_VALUE(con, 0);
break;
case SCLK_I2C4_PMU:
con = readl(&pmucru->pmucru_clksel[3]);
div = I2C_CLK_DIV_VALUE(con, 4);
break;
case SCLK_I2C8_PMU:
con = readl(&pmucru->pmucru_clksel[2]);
div = I2C_CLK_DIV_VALUE(con, 8);
break;
default:
printf("do not support this i2c bus\n");
return -EINVAL;
}
return DIV_TO_RATE(PPLL_HZ, div);
}
static ulong rk3399_i2c_set_pmuclk(struct rk3399_pmucru *pmucru, ulong clk_id,
uint hz)
{
int src_clk_div;
src_clk_div = PPLL_HZ / hz;
assert(src_clk_div - 1 < 127);
switch (clk_id) {
case SCLK_I2C0_PMU:
rk_clrsetreg(&pmucru->pmucru_clksel[2], I2C_PMUCLK_REG_MASK(0),
I2C_PMUCLK_REG_VALUE(0, src_clk_div));
break;
case SCLK_I2C4_PMU:
rk_clrsetreg(&pmucru->pmucru_clksel[3], I2C_PMUCLK_REG_MASK(4),
I2C_PMUCLK_REG_VALUE(4, src_clk_div));
break;
case SCLK_I2C8_PMU:
rk_clrsetreg(&pmucru->pmucru_clksel[2], I2C_PMUCLK_REG_MASK(8),
I2C_PMUCLK_REG_VALUE(8, src_clk_div));
break;
default:
printf("do not support this i2c bus\n");
return -EINVAL;
}
return DIV_TO_RATE(PPLL_HZ, src_clk_div);
}
static ulong rk3399_pwm_get_clk(struct rk3399_pmucru *pmucru)
{
u32 div, con;
/* PWM closk rate is same as pclk_pmu */
con = readl(&pmucru->pmucru_clksel[0]);
div = con & PMU_PCLK_DIV_CON_MASK;
return DIV_TO_RATE(PPLL_HZ, div);
}
static ulong rk3399_pmuclk_get_rate(struct clk *clk)
{
struct rk3399_pmuclk_priv *priv = dev_get_priv(clk->dev);
ulong rate = 0;
switch (clk->id) {
case PLL_PPLL:
return PPLL_HZ;
case PCLK_RKPWM_PMU:
case PCLK_WDT_M0_PMU:
rate = rk3399_pwm_get_clk(priv->pmucru);
break;
case SCLK_I2C0_PMU:
case SCLK_I2C4_PMU:
case SCLK_I2C8_PMU:
rate = rk3399_i2c_get_pmuclk(priv->pmucru, clk->id);
break;
default:
return -ENOENT;
}
return rate;
}
static ulong rk3399_pmuclk_set_rate(struct clk *clk, ulong rate)
{
struct rk3399_pmuclk_priv *priv = dev_get_priv(clk->dev);
ulong ret = 0;
switch (clk->id) {
case PLL_PPLL:
/*
* This has already been set up and we don't want/need
* to change it here. Accept the request though, as the
* device-tree has this in an 'assigned-clocks' list.
*/
return PPLL_HZ;
case SCLK_I2C0_PMU:
case SCLK_I2C4_PMU:
case SCLK_I2C8_PMU:
ret = rk3399_i2c_set_pmuclk(priv->pmucru, clk->id, rate);
break;
default:
return -ENOENT;
}
return ret;
}
static struct clk_ops rk3399_pmuclk_ops = {
.get_rate = rk3399_pmuclk_get_rate,
.set_rate = rk3399_pmuclk_set_rate,
};
#ifndef CONFIG_SPL_BUILD
static void pmuclk_init(struct rk3399_pmucru *pmucru)
{
u32 pclk_div;
/* configure pmu pll(ppll) */
rkclk_set_pll(&pmucru->ppll_con[0], &ppll_init_cfg);
/* configure pmu pclk */
pclk_div = PPLL_HZ / PMU_PCLK_HZ - 1;
rk_clrsetreg(&pmucru->pmucru_clksel[0],
PMU_PCLK_DIV_CON_MASK,
pclk_div << PMU_PCLK_DIV_CON_SHIFT);
}
#endif
static int rk3399_pmuclk_probe(struct udevice *dev)
{
#if CONFIG_IS_ENABLED(OF_PLATDATA) || !defined(CONFIG_SPL_BUILD)
struct rk3399_pmuclk_priv *priv = dev_get_priv(dev);
#endif
#if CONFIG_IS_ENABLED(OF_PLATDATA)
struct rk3399_pmuclk_plat *plat = dev_get_plat(dev);
priv->pmucru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]);
#endif
#ifndef CONFIG_SPL_BUILD
pmuclk_init(priv->pmucru);
#endif
return 0;
}
static int rk3399_pmuclk_of_to_plat(struct udevice *dev)
{
if (CONFIG_IS_ENABLED(OF_REAL)) {
struct rk3399_pmuclk_priv *priv = dev_get_priv(dev);
priv->pmucru = dev_read_addr_ptr(dev);
}
return 0;
}
static int rk3399_pmuclk_bind(struct udevice *dev)
{
#if CONFIG_IS_ENABLED(RESET_ROCKCHIP)
int ret;
ret = offsetof(struct rk3399_pmucru, pmucru_softrst_con[0]);
ret = rockchip_reset_bind(dev, ret, 2);
if (ret)
debug("Warning: software reset driver bind failed\n");
#endif
return 0;
}
static const struct udevice_id rk3399_pmuclk_ids[] = {
{ .compatible = "rockchip,rk3399-pmucru" },
{ }
};
U_BOOT_DRIVER(rockchip_rk3399_pmuclk) = {
.name = "rockchip_rk3399_pmucru",
.id = UCLASS_CLK,
.of_match = rk3399_pmuclk_ids,
.priv_auto = sizeof(struct rk3399_pmuclk_priv),
.of_to_plat = rk3399_pmuclk_of_to_plat,
.ops = &rk3399_pmuclk_ops,
.probe = rk3399_pmuclk_probe,
.bind = rk3399_pmuclk_bind,
#if CONFIG_IS_ENABLED(OF_PLATDATA)
.plat_auto = sizeof(struct rk3399_pmuclk_plat),
#endif
};