| /* |
| * U-Boot - Common settings for Analog Devices boards |
| */ |
| |
| #ifndef __CONFIG_BFIN_ADI_COMMON_H__ |
| #define __CONFIG_BFIN_ADI_COMMON_H__ |
| |
| /* |
| * Command Settings |
| */ |
| #ifndef _CONFIG_CMD_DEFAULT_H |
| # ifdef ADI_CMDS_NETWORK |
| # define CONFIG_BOOTP_SUBNETMASK |
| # define CONFIG_BOOTP_GATEWAY |
| # define CONFIG_BOOTP_DNS |
| # define CONFIG_BOOTP_NTPSERVER |
| # define CONFIG_BOOTP_RANDOM_DELAY |
| # define CONFIG_KEEP_SERVERADDR |
| # ifdef CONFIG_BFIN_MAC |
| # endif |
| # endif |
| # ifdef CONFIG_LIBATA |
| # define CONFIG_CMD_SATA |
| # endif |
| # ifdef CONFIG_MMC |
| # define CONFIG_SYS_MMC_MAX_BLK_COUNT 127 |
| # endif |
| # ifdef CONFIG_MMC_SPI |
| # define CONFIG_CMD_MMC_SPI |
| # endif |
| # ifdef CONFIG_USB |
| # define CONFIG_CMD_USB_STORAGE |
| # endif |
| # if defined(CONFIG_NAND_PLAT) || defined(CONFIG_DRIVER_NAND_BFIN) |
| # define CONFIG_CMD_NAND |
| # define CONFIG_CMD_NAND_LOCK_UNLOCK |
| # endif |
| # ifdef CONFIG_POST |
| # define CONFIG_CMD_DIAG |
| # endif |
| # ifdef CONFIG_RTC_BFIN |
| # define CONFIG_CMD_DATE |
| # ifdef ADI_CMDS_NETWORK |
| # endif |
| # endif |
| # ifdef CONFIG_SPI |
| # define CONFIG_CMD_EEPROM |
| # endif |
| # if defined(CONFIG_SYS_I2C) || defined(CONFIG_SYS_I2C_SOFT) |
| # define CONFIG_SOFT_I2C_READ_REPEATED_START |
| # endif |
| # ifdef CONFIG_MTD_NOR_FLASH |
| # define CONFIG_CMD_JFFS2 |
| # endif |
| # ifdef CONFIG_CMD_JFFS2 |
| # define CONFIG_JFFS2_SUMMARY |
| # endif |
| # define CONFIG_CMD_BOOTLDR |
| # define CONFIG_CMD_CPLBINFO |
| # define CONFIG_CMD_KGDB |
| # define CONFIG_CMD_LDRINFO |
| # define CONFIG_CMD_REGINFO |
| # define CONFIG_CMD_STRINGS |
| # if defined(__ADSPBF51x__) || defined(__ADSPBF52x__) || defined(__ADSPBF54x__) |
| # define CONFIG_CMD_OTP |
| # define CONFIG_CMD_SPIBOOTLDR |
| # endif |
| #endif |
| |
| /* |
| * Console Settings |
| */ |
| #define CONFIG_SYS_LONGHELP 1 |
| #define CONFIG_CMDLINE_EDITING 1 |
| #define CONFIG_AUTO_COMPLETE 1 |
| #define CONFIG_LOADS_ECHO 1 |
| #define CONFIG_JTAG_CONSOLE |
| #ifdef CONFIG_UART_CONSOLE |
| # define CONFIG_BFIN_SERIAL |
| #endif |
| |
| /* |
| * Debug Settings |
| */ |
| #define CONFIG_ENV_OVERWRITE 1 |
| #define CONFIG_DEBUG_DUMP 1 |
| #define CONFIG_KALLSYMS 1 |
| #define CONFIG_PANIC_HANG 1 |
| |
| /* |
| * Env Settings |
| */ |
| #ifndef CONFIG_BOOTCOMMAND |
| # define CONFIG_BOOTCOMMAND "run ramboot" |
| #endif |
| #ifdef CONFIG_VIDEO |
| # define CONFIG_BOOTARGS_VIDEO "console=tty0 " |
| #else |
| # define CONFIG_BOOTARGS_VIDEO "" |
| #endif |
| #ifndef CONFIG_BOOTARGS_ROOT |
| # define CONFIG_BOOTARGS_ROOT "/dev/mtdblock0 rw" |
| #endif |
| #ifndef FLASHBOOT_ENV_SETTINGS |
| # define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20100000\0" |
| #endif |
| #define CONFIG_BOOTARGS \ |
| "root=" CONFIG_BOOTARGS_ROOT " " \ |
| "clkin_hz=" __stringify(CONFIG_CLKIN_HZ) " " \ |
| "earlyprintk=" \ |
| "serial," \ |
| "uart" __stringify(CONFIG_UART_CONSOLE) "," \ |
| __stringify(CONFIG_BAUDRATE) " " \ |
| CONFIG_BOOTARGS_VIDEO \ |
| "console=ttyBF" __stringify(CONFIG_UART_CONSOLE) "," \ |
| __stringify(CONFIG_BAUDRATE) |
| #if defined(CONFIG_CMD_NAND) |
| # define NAND_ENV_SETTINGS \ |
| "nandargs=set bootargs " CONFIG_BOOTARGS "\0" \ |
| "nandboot=" \ |
| "nand read $(loadaddr) 0x20000 0x100000;" \ |
| "run nandargs;" \ |
| "bootm" \ |
| "\0" |
| #else |
| # define NAND_ENV_SETTINGS |
| #endif |
| #if defined(CONFIG_CMD_NET) |
| # if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS) |
| # define UBOOT_ENV_FILE "u-boot.bin" |
| # else |
| # define UBOOT_ENV_FILE "u-boot.ldr" |
| # endif |
| # if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) |
| # ifdef CONFIG_SPI |
| # define UBOOT_ENV_UPDATE \ |
| "eeprom write $(loadaddr) 0x0 $(filesize)" |
| # else |
| # ifndef CONFIG_BFIN_SPI_IMG_SIZE |
| # define CONFIG_BFIN_SPI_IMG_SIZE 0x40000 |
| # endif |
| # define UBOOT_ENV_UPDATE \ |
| "sf probe " __stringify(BFIN_BOOT_SPI_SSEL) ";" \ |
| "sf erase 0 " __stringify(CONFIG_BFIN_SPI_IMG_SIZE) ";" \ |
| "sf write $(loadaddr) 0 $(filesize)" |
| # endif |
| # elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) |
| # define UBOOT_ENV_UPDATE \ |
| "nand unlock 0 0x40000;" \ |
| "nand erase 0 0x40000;" \ |
| "nand write $(loadaddr) 0 0x40000" |
| # else |
| # ifndef UBOOT_ENV_UPDATE |
| # define UBOOT_ENV_UPDATE \ |
| "protect off 0x20000000 +$(filesize);" \ |
| "erase 0x20000000 +$(filesize);" \ |
| "cp.b $(loadaddr) 0x20000000 $(filesize)" |
| # endif |
| # endif |
| # ifdef CONFIG_NETCONSOLE |
| # define NETCONSOLE_ENV \ |
| "nc=" \ |
| "set ncip ${serverip};" \ |
| "set stdin nc;" \ |
| "set stdout nc;" \ |
| "set stderr nc" \ |
| "\0" |
| # else |
| # define NETCONSOLE_ENV |
| # endif |
| # define NETWORK_ENV_SETTINGS \ |
| NETCONSOLE_ENV \ |
| \ |
| "ubootfile=" UBOOT_ENV_FILE "\0" \ |
| "update=" \ |
| "tftp $(loadaddr) $(ubootfile);" \ |
| UBOOT_ENV_UPDATE \ |
| "\0" \ |
| "addip=set bootargs $(bootargs) " \ |
| "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):" \ |
| "$(hostname):eth0:off" \ |
| "\0" \ |
| \ |
| "ramfile=uImage\0" \ |
| "ramargs=set bootargs " CONFIG_BOOTARGS "\0" \ |
| "ramboot=" \ |
| "tftp $(loadaddr) $(ramfile);" \ |
| "run ramargs;" \ |
| "run addip;" \ |
| "bootm" \ |
| "\0" \ |
| \ |
| "nfsfile=vmImage\0" \ |
| "nfsargs=set bootargs " \ |
| "root=/dev/nfs rw " \ |
| "nfsroot=$(serverip):$(rootpath),tcp,nfsvers=3" \ |
| "\0" \ |
| "nfsboot=" \ |
| "tftp $(loadaddr) $(nfsfile);" \ |
| "run nfsargs;" \ |
| "run addip;" \ |
| "bootm" \ |
| "\0" |
| #else |
| # define NETWORK_ENV_SETTINGS |
| #endif |
| #ifndef BOARD_ENV_SETTINGS |
| # define BOARD_ENV_SETTINGS |
| #endif |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| NAND_ENV_SETTINGS \ |
| NETWORK_ENV_SETTINGS \ |
| FLASHBOOT_ENV_SETTINGS \ |
| BOARD_ENV_SETTINGS |
| |
| /* |
| * Network Settings |
| */ |
| #ifdef CONFIG_CMD_NET |
| # define CONFIG_NETMASK 255.255.255.0 |
| # ifndef CONFIG_IPADDR |
| # define CONFIG_IPADDR 192.168.0.15 |
| # define CONFIG_GATEWAYIP 192.168.0.1 |
| # define CONFIG_SERVERIP 192.168.0.2 |
| # endif |
| # ifndef CONFIG_ROOTPATH |
| # define CONFIG_ROOTPATH "/romfs" |
| # endif |
| # ifdef CONFIG_CMD_DHCP |
| # ifndef CONFIG_SYS_AUTOLOAD |
| # define CONFIG_SYS_AUTOLOAD "no" |
| # endif |
| # endif |
| # define CONFIG_IP_DEFRAG |
| # define CONFIG_NET_RETRY_COUNT 20 |
| #endif |
| |
| /* |
| * Flash Settings |
| */ |
| #define CONFIG_FLASH_SHOW_PROGRESS 45 |
| |
| /* |
| * SPI Settings |
| */ |
| #ifdef CONFIG_SPI_FLASH_ALL |
| #endif |
| |
| /* |
| * I2C Settings |
| */ |
| #if defined(CONFIG_SYS_I2C) || defined(CONFIG_SYS_I2C_SOFT) |
| # ifndef CONFIG_SYS_I2C_SPEED |
| # define CONFIG_SYS_I2C_SPEED 50000 |
| # endif |
| # ifndef CONFIG_SYS_I2C_SLAVE |
| # define CONFIG_SYS_I2C_SLAVE 0 |
| # endif |
| #endif |
| |
| /* |
| * Misc Settings |
| */ |
| #ifndef CONFIG_BOARD_SIZE_LIMIT |
| # define CONFIG_BOARD_SIZE_LIMIT $$(( 256 * 1024 )) |
| #endif |
| #define CONFIG_BFIN_SPI_GPIO_CS /* Only matters if BFIN_SPI is enabled */ |
| #define CONFIG_LZMA |
| #define CONFIG_MONITOR_IS_IN_RAM |
| #ifdef CONFIG_HW_WATCHDOG |
| # define CONFIG_BFIN_WATCHDOG |
| # ifndef CONFIG_WATCHDOG_TIMEOUT_MSECS |
| # define CONFIG_WATCHDOG_TIMEOUT_MSECS 5000 |
| # endif |
| #endif |
| #ifndef CONFIG_ADI_GPIO2 |
| # define CONFIG_ADI_GPIO1 |
| #endif |
| #endif |