| /* |
| * Copyright (C) 2004 by FS Forth-Systeme GmbH. |
| * All rights reserved. |
| * Markus Pietrek <mpietrek@fsforth.de> |
| * |
| * Configuation settings for the NetSilicon NS9750 DevBoard |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* |
| * High Level Configuration Options |
| * (easy to change) |
| */ |
| #define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ |
| #define CONFIG_NS9750 1 /* in an NetSilicon NS9750 SoC */ |
| #define CONFIG_NS9750DEV 1 /* on an NetSilicon NS9750 DevBoard */ |
| |
| /* input clock of PLL */ |
| #define CONFIG_SYS_CLK_FREQ 324403200 /* Don't use PLL. SW11-4 off */ |
| |
| #define CPU_CLK_FREQ (CONFIG_SYS_CLK_FREQ/2) |
| #define AHB_CLK_FREQ (CONFIG_SYS_CLK_FREQ/4) |
| #define BBUS_CLK_FREQ (CONFIG_SYS_CLK_FREQ/8) |
| |
| #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ |
| /*@TODO #define CONFIG_STATUS_LED*/ |
| #define CONFIG_USE_IRQ |
| |
| /* |
| * Size of malloc() pool |
| */ |
| #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) |
| |
| /* |
| * Hardware drivers |
| */ |
| #define CONFIG_NS9750_UART 1 /* use on-chip UART */ |
| #define CONFIG_DRIVER_NS9750_ETHERNET 1 /* use on-chip ethernet */ |
| |
| /* |
| * select serial console configuration |
| */ |
| #define CONFIG_CONS_INDEX 1 /* Port B */ |
| |
| /* allow to overwrite serial and ethaddr */ |
| #define CONFIG_ENV_OVERWRITE |
| |
| #define CONFIG_BAUDRATE 38400 |
| |
| |
| /* |
| * BOOTP options |
| */ |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| #define CONFIG_BOOTP_BOOTPATH |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_HOSTNAME |
| |
| |
| /* |
| * Command line configuration. |
| */ |
| |
| #define CONFIG_CMD_BDI |
| #define CONFIG_CMD_CONSOLE |
| #define CONFIG_CMD_LOADB |
| #define CONFIG_CMD_LOADS |
| #define CONFIG_CMD_MEMORY |
| #define CONFIG_CMD_NET |
| #define CONFIG_CMD_PING |
| |
| |
| #define CONFIG_BOOTDELAY 3 |
| /*#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" */ |
| |
| #define CONFIG_ETHADDR 00:04:f3:ff:ff:fb /*@TODO unset */ |
| #define CONFIG_NETMASK 255.255.255.0 |
| #define CONFIG_IPADDR 192.168.42.30 |
| #define CONFIG_SERVERIP 192.168.42.1 |
| |
| /*#define CONFIG_BOOTFILE "elinos-lart" */ |
| /*#define CONFIG_BOOTCOMMAND "tftp; bootm" */ |
| |
| #if defined(CONFIG_CMD_KGDB) |
| #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ |
| /* what's this ? it's not used anywhere */ |
| #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ |
| #endif |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| #define CONFIG_SYS_PROMPT "NS9750DEV # " /* Monitor Command Prompt */ |
| #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
| #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ |
| |
| #define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ |
| #define CONFIG_SYS_MEMTEST_END 0x00780000 /* 7,5 MB in DRAM */ /* @TODO */ |
| |
| #define CONFIG_SYS_LOAD_ADDR 0x00600000 /* default load address */ /* @TODO */ |
| |
| #define CONFIG_SYS_HZ (CPU_CLK_FREQ/64) |
| |
| /* valid baudrates */ |
| #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |
| |
| #define NS9750_ETH_PHY_ADDRESS (0x0000) |
| |
| /*----------------------------------------------------------------------- |
| * Stack sizes |
| * |
| * The stack sizes are set up in start.S using the settings below |
| */ |
| #define CONFIG_STACKSIZE (128*1024) /* regular stack */ |
| #ifdef CONFIG_USE_IRQ |
| #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ |
| #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ |
| #endif |
| |
| /*----------------------------------------------------------------------- |
| * Physical Memory Map |
| */ |
| /* TODO */ |
| #define CONFIG_NR_DRAM_BANKS 2 /* we have 1 bank of DRAM */ |
| #define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ |
| #define PHYS_SDRAM_1_SIZE 0x00800000 /* 8 MB */ |
| #define PHYS_SDRAM_2 0x10000000 /* SDRAM Bank #1 */ |
| #define PHYS_SDRAM_2_SIZE 0x00800000 /* 8 MB */ |
| |
| #define PHYS_FLASH_1 0x50000000 /* Flash Bank #1 */ |
| |
| #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 |
| |
| /*----------------------------------------------------------------------- |
| * FLASH and environment organization |
| */ |
| |
| /* @TODO*/ |
| #define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */ |
| #if 0 |
| #define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */ |
| #endif |
| |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ |
| #ifdef CONFIG_AMD_LV800 |
| #define PHYS_FLASH_SIZE 0x00100000 /* 1MB */ |
| #define CONFIG_SYS_MAX_FLASH_SECT (19) /* max number of sectors on one chip */ |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x0F0000) /* addr of environment */ |
| #endif |
| #ifdef CONFIG_AMD_LV400 |
| #define PHYS_FLASH_SIZE 0x00080000 /* 512KB */ |
| #define CONFIG_SYS_MAX_FLASH_SECT (11) /* max number of sectors on one chip */ |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x070000) /* addr of environment */ |
| #endif |
| |
| /* timeout values are in ticks */ |
| #define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ |
| #define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */ |
| |
| /* @TODO */ |
| /*#define CONFIG_ENV_IS_IN_FLASH 1*/ |
| #define CONFIG_ENV_IS_NOWHERE |
| #define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ |
| |
| #ifdef CONFIG_STATUS_LED |
| |
| extern void __led_init(led_id_t mask, int state); |
| extern void __led_toggle(led_id_t mask); |
| extern void __led_set(led_id_t mask, int state); |
| |
| #endif /* CONFIG_STATUS_LED */ |
| |
| #endif /* __CONFIG_H */ |