| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (c) 2016-17 Microsemi Corporation. |
| * Padmarao Begari, Microsemi Corporation <padmarao.begari@microsemi.com> |
| * |
| * Copyright (C) 2017 Andes Technology Corporation |
| * Rick Chen, Andes Technology Corporation <rick@andestech.com> |
| * |
| * Copyright (C) 2019 Sean Anderson <seanga2@gmail.com> |
| */ |
| |
| #include <linux/compat.h> |
| #include <common.h> |
| #include <efi_loader.h> |
| #include <hang.h> |
| #include <irq_func.h> |
| #include <asm/global_data.h> |
| #include <asm/ptrace.h> |
| #include <asm/system.h> |
| #include <asm/encoding.h> |
| #include <semihosting.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static void show_efi_loaded_images(uintptr_t epc) |
| { |
| efi_print_image_infos((void *)epc); |
| } |
| |
| static void show_regs(struct pt_regs *regs) |
| { |
| #ifdef CONFIG_SHOW_REGS |
| printf("\nSP: " REG_FMT " GP: " REG_FMT " TP: " REG_FMT "\n", |
| regs->sp, regs->gp, regs->tp); |
| printf("T0: " REG_FMT " T1: " REG_FMT " T2: " REG_FMT "\n", |
| regs->t0, regs->t1, regs->t2); |
| printf("S0: " REG_FMT " S1: " REG_FMT " A0: " REG_FMT "\n", |
| regs->s0, regs->s1, regs->a0); |
| printf("A1: " REG_FMT " A2: " REG_FMT " A3: " REG_FMT "\n", |
| regs->a1, regs->a2, regs->a3); |
| printf("A4: " REG_FMT " A5: " REG_FMT " A6: " REG_FMT "\n", |
| regs->a4, regs->a5, regs->a6); |
| printf("A7: " REG_FMT " S2: " REG_FMT " S3: " REG_FMT "\n", |
| regs->a7, regs->s2, regs->s3); |
| printf("S4: " REG_FMT " S5: " REG_FMT " S6: " REG_FMT "\n", |
| regs->s4, regs->s5, regs->s6); |
| printf("S7: " REG_FMT " S8: " REG_FMT " S9: " REG_FMT "\n", |
| regs->s7, regs->s8, regs->s9); |
| printf("S10: " REG_FMT " S11: " REG_FMT " T3: " REG_FMT "\n", |
| regs->s10, regs->s11, regs->t3); |
| printf("T4: " REG_FMT " T5: " REG_FMT " T6: " REG_FMT "\n", |
| regs->t4, regs->t5, regs->t6); |
| #endif |
| } |
| |
| /** |
| * instr_len() - get instruction length |
| * |
| * @i: low 16 bits of the instruction |
| * Return: number of u16 in instruction |
| */ |
| static int instr_len(u16 i) |
| { |
| if ((i & 0x03) != 0x03) |
| return 1; |
| /* Instructions with more than 32 bits are not yet specified */ |
| return 2; |
| } |
| |
| /** |
| * show_code() - display code leading to exception |
| * |
| * @epc: program counter |
| */ |
| static void show_code(ulong epc) |
| { |
| u16 *pos = (u16 *)(epc & ~1UL); |
| int i, len = instr_len(*pos); |
| |
| printf("\nCode: "); |
| for (i = -8; i; ++i) |
| printf("%04x ", pos[i]); |
| printf("("); |
| for (i = 0; i < len; ++i) |
| printf("%04x%s", pos[i], i + 1 == len ? ")\n" : " "); |
| } |
| |
| static void _exit_trap(ulong code, ulong epc, ulong tval, struct pt_regs *regs) |
| { |
| static const char * const exception_code[] = { |
| "Instruction address misaligned", |
| "Instruction access fault", |
| "Illegal instruction", |
| "Breakpoint", |
| "Load address misaligned", |
| "Load access fault", |
| "Store/AMO address misaligned", |
| "Store/AMO access fault", |
| "Environment call from U-mode", |
| "Environment call from S-mode", |
| "Reserved", |
| "Environment call from M-mode", |
| "Instruction page fault", |
| "Load page fault", |
| "Reserved", |
| "Store/AMO page fault", |
| }; |
| |
| if (code < ARRAY_SIZE(exception_code)) |
| printf("Unhandled exception: %s\n", exception_code[code]); |
| else |
| printf("Unhandled exception code: %ld\n", code); |
| |
| printf("EPC: " REG_FMT " RA: " REG_FMT " TVAL: " REG_FMT "\n", |
| epc, regs->ra, tval); |
| /* Print relocation adjustments, but only if gd is initialized */ |
| if (gd && gd->flags & GD_FLG_RELOC) |
| printf("EPC: " REG_FMT " RA: " REG_FMT " reloc adjusted\n", |
| epc - gd->reloc_off, regs->ra - gd->reloc_off); |
| |
| show_regs(regs); |
| show_code(epc); |
| show_efi_loaded_images(epc); |
| panic("\n"); |
| } |
| |
| int interrupt_init(void) |
| { |
| return 0; |
| } |
| |
| /* |
| * enable interrupts |
| */ |
| void enable_interrupts(void) |
| { |
| } |
| |
| /* |
| * disable interrupts |
| */ |
| int disable_interrupts(void) |
| { |
| return 0; |
| } |
| |
| ulong handle_trap(ulong cause, ulong epc, ulong tval, struct pt_regs *regs) |
| { |
| ulong is_irq, irq; |
| |
| /* An UEFI application may have changed gd. Restore U-Boot's gd. */ |
| efi_restore_gd(); |
| |
| if (cause == CAUSE_BREAKPOINT && |
| CONFIG_IS_ENABLED(SEMIHOSTING_FALLBACK)) { |
| ulong pre_addr = epc - 4, post_addr = epc + 4; |
| |
| /* Check for prior and post addresses to be in same page. */ |
| if ((pre_addr & ~(PAGE_SIZE - 1)) == |
| (post_addr & ~(PAGE_SIZE - 1))) { |
| u32 pre = *(u32 *)pre_addr; |
| u32 post = *(u32 *)post_addr; |
| |
| /* Check for semihosting, i.e.: |
| * slli zero,zero,0x1f |
| * ebreak |
| * srai zero,zero,0x7 |
| */ |
| if (pre == 0x01f01013 && post == 0x40705013) { |
| disable_semihosting(); |
| epc += 4; |
| return epc; |
| } |
| } |
| } |
| |
| is_irq = (cause & MCAUSE_INT); |
| irq = (cause & ~MCAUSE_INT); |
| |
| if (is_irq) { |
| switch (irq) { |
| case IRQ_M_EXT: |
| case IRQ_S_EXT: |
| external_interrupt(0); /* handle external interrupt */ |
| break; |
| case IRQ_M_TIMER: |
| case IRQ_S_TIMER: |
| timer_interrupt(0); /* handle timer interrupt */ |
| break; |
| default: |
| _exit_trap(cause, epc, tval, regs); |
| break; |
| }; |
| } else { |
| _exit_trap(cause, epc, tval, regs); |
| } |
| |
| return epc; |
| } |
| |
| /* |
| *Entry Point for PLIC Interrupt Handler |
| */ |
| __attribute__((weak)) void external_interrupt(struct pt_regs *regs) |
| { |
| } |
| |
| __attribute__((weak)) void timer_interrupt(struct pt_regs *regs) |
| { |
| } |