| config NXP_ESBC |
| bool "NXP ESBC (secure boot) functionality" |
| help |
| Enable Freescale Secure Boot feature. Normally selected by defconfig. |
| If unsure, do not change. |
| |
| menu "Chain of trust / secure boot options" |
| depends on !FIT_SIGNATURE && NXP_ESBC |
| |
| config CHAIN_OF_TRUST |
| select FSL_CAAM |
| select ARCH_MISC_INIT |
| select FSL_SEC_MON |
| select SPL_BOARD_INIT if (ARM && SPL) |
| select SPL_HASH if (ARM && SPL) |
| select SHA_HW_ACCEL |
| select SHA_PROG_HW_ACCEL |
| select ENV_IS_NOWHERE |
| select CMD_EXT4 if ARM |
| select CMD_EXT4_WRITE if ARM |
| imply CMD_BLOB |
| imply CMD_HASH if ARM |
| def_bool y |
| |
| config CMD_ESBC_VALIDATE |
| bool "Enable the 'esbc_validate' and 'esbc_halt' commands" |
| default y |
| help |
| This option enables two commands used for secure booting: |
| |
| esbc_validate - validate signature using RSA verification |
| esbc_halt - put the core in spin loop (Secure Boot Only) |
| |
| config ESBC_HDR_LS |
| bool |
| |
| config ESBC_ADDR_64BIT |
| def_bool y |
| depends on ESBC_HDR_LS && FSL_LAYERSCAPE |
| help |
| For Layerscape based platforms, ESBC image Address in Header is 64bit. |
| |
| config SYS_FSL_SFP_BE |
| def_bool y |
| depends on PPC || FSL_LSCH2 || ARCH_LS1021A |
| |
| config SYS_FSL_SFP_LE |
| def_bool y |
| depends on !SYS_FSL_SFP_BE |
| |
| choice |
| prompt "SFP IP revision" |
| default SYS_FSL_SFP_VER_3_0 if PPC |
| default SYS_FSL_SFP_VER_3_4 |
| |
| config SYS_FSL_SFP_VER_3_0 |
| bool "SFP version 3.0" |
| |
| config SYS_FSL_SFP_VER_3_2 |
| bool "SFP version 3.2" |
| |
| config SYS_FSL_SFP_VER_3_4 |
| bool "SFP version 3.4" |
| |
| endchoice |
| |
| config SPL_UBOOT_KEY_HASH |
| string "Non-SRK key hash for U-Boot public/private key pair" |
| depends on SPL |
| default "" |
| help |
| Set the key hash for U-Boot here if public/private key pair used to |
| sign U-boot are different from the SRK hash put in the fuse. Example |
| of a key hash is |
| 41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b. |
| Otherwise leave this empty. |
| |
| if PPC |
| |
| config BOOTSCRIPT_COPY_RAM |
| bool "Secure boot copies boot script to RAM" |
| help |
| On systems that support chain of trust booting, a number of addresses |
| are required to set variables that are used in the copying and then |
| verification of different parts of the system. If enabled, the subsequent |
| options are for what location to use in each step. |
| |
| config BS_ADDR_DEVICE |
| hex "Address in RAM for bs_device" |
| depends on BOOTSCRIPT_COPY_RAM |
| |
| config BS_SIZE |
| hex "The size of bs_size which is the amount read from bs_device" |
| depends on BOOTSCRIPT_COPY_RAM |
| |
| config BS_ADDR_RAM |
| hex "Address in RAM for bs_ram" |
| depends on BOOTSCRIPT_COPY_RAM |
| |
| config BS_HDR_ADDR_DEVICE |
| hex "Address in RAM for bs_hdr_device" |
| depends on BOOTSCRIPT_COPY_RAM |
| |
| config BS_HDR_SIZE |
| hex "The size of bs_hdr_size which is the amount read from bs_hdr_device" |
| depends on BOOTSCRIPT_COPY_RAM |
| |
| config BS_HDR_ADDR_RAM |
| hex "Address in RAM for bs_hdr_ram" |
| depends on BOOTSCRIPT_COPY_RAM |
| |
| config BOOTSCRIPT_HDR_ADDR |
| hex "CONFIG_BOOTSCRIPT_HDR_ADDR" |
| default BS_ADDR_RAM if BOOTSCRIPT_COPY_RAM |
| |
| endif |
| |
| config SYS_FSL_SRK_LE |
| def_bool y |
| depends on ARM |
| |
| config KEY_REVOCATION |
| def_bool y |
| |
| endmenu |
| |
| comment "Other functionality shared between NXP SoCs" |
| |
| config DEEP_SLEEP |
| bool "Enable SoC deep sleep feature" |
| depends on ARCH_T1024 || ARCH_T1040 || ARCH_T1042 || ARCH_LS1021A |
| default y |
| help |
| Indicates this SoC supports deep sleep feature. If deep sleep is |
| supported, core will start to execute uboot when wakes up. |
| |
| config FSL_USE_PCA9547_MUX |
| bool "Enable PCA9547 I2C Mux on Freescale boards" |
| depends on PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3 |
| help |
| This option enables the PCA9547 I2C mux on Freescale boards. |
| |
| config VID |
| bool "Enable Freescale VID" |
| depends on (PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3) && (I2C || DM_I2C) |
| help |
| This option enables setting core voltage based on individual |
| values saved in SoC fuses. |
| |
| config SPL_VID |
| bool "Enable Freescale VID in SPL" |
| depends on (PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3) && (SPL_I2C || DM_SPL_I2C) |
| help |
| This option enables setting core voltage based on individual |
| values saved in SoC fuses, in SPL. |
| |
| if VID || SPL_VID |
| |
| config VID_FLS_ENV |
| string "Environment variable for overriding VDD" |
| help |
| This option allows for specifying the environment variable |
| to check to override VDD information. |
| |
| config VOL_MONITOR_INA220 |
| bool "Enable the INA220 voltage monitor read" |
| help |
| This option enables INA220 voltage monitor read |
| functionality. It is used by the common VID driver. |
| |
| config VOL_MONITOR_IR36021_READ |
| bool "Enable the IR36021 voltage monitor read" |
| help |
| This option enables IR36021 voltage monitor read |
| functionality. It is used by the common VID driver. |
| |
| config VOL_MONITOR_IR36021_SET |
| bool "Enable the IR36021 voltage monitor set" |
| help |
| This option enables IR36021 voltage monitor set |
| functionality. It is used by the common VID driver. |
| |
| config VOL_MONITOR_LTC3882_READ |
| bool "Enable the LTC3882 voltage monitor read" |
| help |
| This option enables LTC3882 voltage monitor read |
| functionality. It is used by the common VID driver. |
| |
| config VOL_MONITOR_LTC3882_SET |
| bool "Enable the LTC3882 voltage monitor set" |
| help |
| This option enables LTC3882 voltage monitor set |
| functionality. It is used by the common VID driver. |
| |
| config VOL_MONITOR_ISL68233_READ |
| bool "Enable the ISL68233 voltage monitor read" |
| help |
| This option enables ISL68233 voltage monitor read |
| functionality. It is used by the common VID driver. |
| |
| config VOL_MONITOR_ISL68233_SET |
| bool "Enable the ISL68233 voltage monitor set" |
| help |
| This option enables ISL68233 voltage monitor set |
| functionality. It is used by the common VID driver. |
| |
| endif |
| |
| config FSL_QIXIS |
| bool "Enable QIXIS support" |
| depends on PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3 |
| |
| config QIXIS_I2C_ACCESS |
| bool "Access to QIXIS is over i2c" |
| depends on FSL_QIXIS |
| default y |
| |
| config HAS_FSL_DR_USB |
| def_bool y |
| depends on USB_EHCI_HCD && PPC |