| /* |
| * (C) Copyright 2005 |
| * Stefan Roese, DENX Software Engineering, sr@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| |
| #include <common.h> |
| #include <asm/processor.h> |
| #include <asm/immap_85xx.h> |
| #include <asm/processor.h> |
| #include <asm/mmu.h> |
| #include <spd.h> |
| |
| struct sdram_conf_s { |
| unsigned long size; |
| unsigned long reg; |
| }; |
| |
| typedef struct sdram_conf_s sdram_conf_t; |
| |
| sdram_conf_t ddr_cs_conf[] = { |
| {(512 << 20), 0x80000202}, /* 512MB, 14x10(4) */ |
| {(256 << 20), 0x80000102}, /* 256MB, 13x10(4) */ |
| {(128 << 20), 0x80000101}, /* 128MB, 13x9(4) */ |
| {(64 << 20), 0x80000001}, /* 64MB, 12x9(4) */ |
| }; |
| |
| #define N_DDR_CS_CONF (sizeof(ddr_cs_conf) / sizeof(ddr_cs_conf[0])) |
| |
| int cas_latency(void); |
| |
| /* |
| * Autodetect onboard DDR SDRAM on 85xx platforms |
| * |
| * NOTE: Some of the hardcoded values are hardware dependant, |
| * so this should be extended for other future boards |
| * using this routine! |
| */ |
| long int sdram_setup(int casl) |
| { |
| int i; |
| volatile immap_t *immap = (immap_t *) CFG_IMMR; |
| volatile ccsr_ddr_t *ddr = &immap->im_ddr; |
| unsigned long cfg_ddr_timing1; |
| unsigned long cfg_ddr_mode; |
| |
| /* |
| * Disable memory controller. |
| */ |
| ddr->cs0_config = 0; |
| ddr->sdram_cfg = 0; |
| |
| switch (casl) { |
| case 20: |
| cfg_ddr_timing1 = 0x47405331 | (3 << 16); |
| cfg_ddr_mode = 0x40020002 | (2 << 4); |
| break; |
| |
| case 25: |
| cfg_ddr_timing1 = 0x47405331 | (4 << 16); |
| cfg_ddr_mode = 0x40020002 | (6 << 4); |
| break; |
| |
| case 30: |
| default: |
| cfg_ddr_timing1 = 0x47405331 | (5 << 16); |
| cfg_ddr_mode = 0x40020002 | (3 << 4); |
| break; |
| } |
| |
| ddr->cs0_bnds = (ddr_cs_conf[0].size - 1) >> 24; |
| ddr->cs0_config = ddr_cs_conf[0].reg; |
| ddr->timing_cfg_1 = cfg_ddr_timing1; |
| ddr->timing_cfg_2 = 0x00000800; /* P9-45,may need tuning */ |
| ddr->sdram_mode = cfg_ddr_mode; |
| ddr->sdram_interval = 0x05160100; /* autocharge,no open page */ |
| ddr->err_disable = 0x0000000D; |
| |
| asm ("sync;isync;msync"); |
| udelay(1000); |
| |
| ddr->sdram_cfg = 0xc2000000; /* unbuffered,no DYN_PWR */ |
| asm ("sync; isync; msync"); |
| udelay(1000); |
| |
| for (i=0; i<N_DDR_CS_CONF; i++) { |
| ddr->cs0_config = ddr_cs_conf[i].reg; |
| |
| if (get_ram_size(0, ddr_cs_conf[i].size) == ddr_cs_conf[i].size) { |
| /* |
| * OK, size detected -> all done |
| */ |
| return ddr_cs_conf[i].size; |
| } |
| } |
| |
| return 0; /* nothing found ! */ |
| } |
| |
| void board_add_ram_info(int use_default) |
| { |
| int casl; |
| |
| if (use_default) |
| casl = CONFIG_DDR_DEFAULT_CL; |
| else |
| casl = cas_latency(); |
| |
| puts(" (CL="); |
| switch (casl) { |
| case 20: |
| puts("2)"); |
| break; |
| |
| case 25: |
| puts("2.5)"); |
| break; |
| |
| case 30: |
| puts("3)"); |
| break; |
| } |
| } |
| |
| long int initdram (int board_type) |
| { |
| long dram_size = 0; |
| int casl; |
| |
| #if defined(CONFIG_DDR_DLL) |
| /* |
| * This DLL-Override only used on TQM8540 and TQM8560 |
| */ |
| { |
| volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); |
| int i,x; |
| |
| x = 10; |
| |
| /* |
| * Work around to stabilize DDR DLL |
| */ |
| gur->ddrdllcr = 0x81000000; |
| asm("sync;isync;msync"); |
| udelay (200); |
| while (gur->ddrdllcr != 0x81000100) { |
| gur->devdisr = gur->devdisr | 0x00010000; |
| asm("sync;isync;msync"); |
| for (i=0; i<x; i++) |
| ; |
| gur->devdisr = gur->devdisr & 0xfff7ffff; |
| asm("sync;isync;msync"); |
| x++; |
| } |
| } |
| #endif |
| |
| casl = cas_latency(); |
| dram_size = sdram_setup(casl); |
| if ((dram_size == 0) && (casl != CONFIG_DDR_DEFAULT_CL)) { |
| /* |
| * Try again with default CAS latency |
| */ |
| puts("Problem with CAS lantency"); |
| board_add_ram_info(1); |
| puts(", using default CL!\n"); |
| casl = CONFIG_DDR_DEFAULT_CL; |
| dram_size = sdram_setup(casl); |
| puts(" "); |
| } |
| |
| return dram_size; |
| } |
| |
| #if defined(CFG_DRAM_TEST) |
| int testdram (void) |
| { |
| uint *pstart = (uint *) CFG_MEMTEST_START; |
| uint *pend = (uint *) CFG_MEMTEST_END; |
| uint *p; |
| |
| printf ("SDRAM test phase 1:\n"); |
| for (p = pstart; p < pend; p++) |
| *p = 0xaaaaaaaa; |
| |
| for (p = pstart; p < pend; p++) { |
| if (*p != 0xaaaaaaaa) { |
| printf ("SDRAM test fails at: %08x\n", (uint) p); |
| return 1; |
| } |
| } |
| |
| printf ("SDRAM test phase 2:\n"); |
| for (p = pstart; p < pend; p++) |
| *p = 0x55555555; |
| |
| for (p = pstart; p < pend; p++) { |
| if (*p != 0x55555555) { |
| printf ("SDRAM test fails at: %08x\n", (uint) p); |
| return 1; |
| } |
| } |
| |
| printf ("SDRAM test passed.\n"); |
| return 0; |
| } |
| #endif |