| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * SBI initialilization and all extension implementation. |
| * |
| * Copyright (c) 2020 Western Digital Corporation or its affiliates. |
| * |
| * Taken from Linux arch/riscv/kernel/sbi.c |
| */ |
| |
| #include <common.h> |
| #include <asm/encoding.h> |
| #include <asm/sbi.h> |
| |
| /* default SBI version is 0.1 */ |
| unsigned long sbi_spec_version = SBI_SPEC_VERSION_DEFAULT; |
| |
| struct sbiret sbi_ecall(int ext, int fid, unsigned long arg0, |
| unsigned long arg1, unsigned long arg2, |
| unsigned long arg3, unsigned long arg4, |
| unsigned long arg5) |
| { |
| struct sbiret ret; |
| |
| register uintptr_t a0 asm ("a0") = (uintptr_t)(arg0); |
| register uintptr_t a1 asm ("a1") = (uintptr_t)(arg1); |
| register uintptr_t a2 asm ("a2") = (uintptr_t)(arg2); |
| register uintptr_t a3 asm ("a3") = (uintptr_t)(arg3); |
| register uintptr_t a4 asm ("a4") = (uintptr_t)(arg4); |
| register uintptr_t a5 asm ("a5") = (uintptr_t)(arg5); |
| register uintptr_t a6 asm ("a6") = (uintptr_t)(fid); |
| register uintptr_t a7 asm ("a7") = (uintptr_t)(ext); |
| asm volatile ("ecall" |
| : "+r" (a0), "+r" (a1) |
| : "r" (a2), "r" (a3), "r" (a4), "r" (a5), "r" (a6), "r" (a7) |
| : "memory"); |
| ret.error = a0; |
| ret.value = a1; |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_SBI_V01 |
| |
| /** |
| * sbi_console_putchar() - Writes given character to the console device. |
| * @ch: The data to be written to the console. |
| * |
| * Return: None |
| */ |
| void sbi_console_putchar(int ch) |
| { |
| sbi_ecall(SBI_EXT_0_1_CONSOLE_PUTCHAR, 0, ch, 0, 0, 0, 0, 0); |
| } |
| |
| /** |
| * sbi_console_getchar() - Reads a byte from console device. |
| * |
| * Returns the value read from console. |
| */ |
| int sbi_console_getchar(void) |
| { |
| struct sbiret ret; |
| |
| ret = sbi_ecall(SBI_EXT_0_1_CONSOLE_GETCHAR, 0, 0, 0, 0, 0, 0, 0); |
| |
| return ret.error; |
| } |
| |
| /** |
| * sbi_clear_ipi() - Clear any pending IPIs for the calling hart. |
| * |
| * Return: None |
| */ |
| void sbi_clear_ipi(void) |
| { |
| sbi_ecall(SBI_EXT_0_1_CLEAR_IPI, 0, 0, 0, 0, 0, 0, 0); |
| } |
| |
| /** |
| * sbi_shutdown() - Remove all the harts from executing supervisor code. |
| * |
| * Return: None |
| */ |
| void sbi_shutdown(void) |
| { |
| sbi_ecall(SBI_EXT_0_1_SHUTDOWN, 0, 0, 0, 0, 0, 0, 0); |
| } |
| |
| #endif /* CONFIG_SBI_V01 */ |
| |
| /** |
| * sbi_set_timer() - Program the timer for next timer event. |
| * @stime_value: The value after which next timer event should fire. |
| * |
| * Return: None |
| */ |
| void sbi_set_timer(uint64_t stime_value) |
| { |
| #if __riscv_xlen == 32 |
| sbi_ecall(SBI_EXT_SET_TIMER, SBI_FID_SET_TIMER, stime_value, |
| stime_value >> 32, 0, 0, 0, 0); |
| #else |
| sbi_ecall(SBI_EXT_SET_TIMER, SBI_FID_SET_TIMER, stime_value, |
| 0, 0, 0, 0, 0); |
| #endif |
| } |
| |
| /** |
| * sbi_send_ipi() - Send an IPI to any hart. |
| * @hart_mask: A cpu mask containing all the target harts. |
| * |
| * Return: None |
| */ |
| void sbi_send_ipi(const unsigned long *hart_mask) |
| { |
| sbi_ecall(SBI_EXT_SEND_IPI, SBI_FID_SEND_IPI, (unsigned long)hart_mask, |
| 0, 0, 0, 0, 0); |
| } |
| |
| /** |
| * sbi_remote_fence_i() - Execute FENCE.I instruction on given remote harts. |
| * @hart_mask: A cpu mask containing all the target harts. |
| * |
| * Return: None |
| */ |
| void sbi_remote_fence_i(const unsigned long *hart_mask) |
| { |
| sbi_ecall(SBI_EXT_REMOTE_FENCE_I, SBI_FID_REMOTE_FENCE_I, |
| (unsigned long)hart_mask, 0, 0, 0, 0, 0); |
| } |
| |
| /** |
| * sbi_remote_sfence_vma() - Execute SFENCE.VMA instructions on given remote |
| * harts for the specified virtual address range. |
| * @hart_mask: A cpu mask containing all the target harts. |
| * @start: Start of the virtual address |
| * @size: Total size of the virtual address range. |
| * |
| * Return: None |
| */ |
| void sbi_remote_sfence_vma(const unsigned long *hart_mask, |
| unsigned long start, |
| unsigned long size) |
| { |
| sbi_ecall(SBI_EXT_REMOTE_SFENCE_VMA, SBI_FID_REMOTE_SFENCE_VMA, |
| (unsigned long)hart_mask, start, size, 0, 0, 0); |
| } |
| |
| /** |
| * sbi_remote_sfence_vma_asid() - Execute SFENCE.VMA instructions on given |
| * remote harts for a virtual address range belonging to a specific ASID. |
| * |
| * @hart_mask: A cpu mask containing all the target harts. |
| * @start: Start of the virtual address |
| * @size: Total size of the virtual address range. |
| * @asid: The value of address space identifier (ASID). |
| * |
| * Return: None |
| */ |
| void sbi_remote_sfence_vma_asid(const unsigned long *hart_mask, |
| unsigned long start, |
| unsigned long size, |
| unsigned long asid) |
| { |
| sbi_ecall(SBI_EXT_REMOTE_SFENCE_VMA_ASID, |
| SBI_FID_REMOTE_SFENCE_VMA_ASID, |
| (unsigned long)hart_mask, start, size, asid, 0, 0); |
| } |
| |
| /** |
| * sbi_probe_extension() - Check if an SBI extension ID is supported or not. |
| * @extid: The extension ID to be probed. |
| * |
| * Return: Extension specific nonzero value f yes, -ENOTSUPP otherwise. |
| */ |
| int sbi_probe_extension(int extid) |
| { |
| struct sbiret ret; |
| |
| ret = sbi_ecall(SBI_EXT_BASE, SBI_EXT_BASE_PROBE_EXT, extid, |
| 0, 0, 0, 0, 0); |
| if (!ret.error) |
| if (ret.value) |
| return ret.value; |
| |
| return -ENOTSUPP; |
| } |