| /* |
| * (C) Copyright 2001 |
| * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| /************************************************************************* |
| * changes for Marvell DB64360 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com> |
| * |
| ************************************************************************/ |
| |
| |
| /* |
| * mpsc.h - header file for MPSC in uart mode (console driver) |
| */ |
| |
| #ifndef __MPSC_H__ |
| #define __MPSC_H__ |
| |
| /* include actual Galileo defines */ |
| #include "../include/mv_gen_reg.h" |
| |
| /* driver related defines */ |
| |
| int mpsc_init(int baud); |
| void mpsc_sdma_init(void); |
| void mpsc_init2(void); |
| int galbrg_set_baudrate(int channel, int rate); |
| |
| int mpsc_putchar_early(char ch); |
| char mpsc_getchar_debug(void); |
| int mpsc_test_char_debug(void); |
| |
| int mpsc_test_char_sdma(void); |
| |
| extern int (*mpsc_putchar)(char ch); |
| extern char (*mpsc_getchar)(void); |
| extern int (*mpsc_test_char)(void); |
| |
| #define CHANNEL CONFIG_MPSC_PORT |
| |
| #define TX_DESC 5 |
| #define RX_DESC 20 |
| |
| #define DESC_FIRST 0x00010000 |
| #define DESC_LAST 0x00020000 |
| #define DESC_OWNER_BIT 0x80000000 |
| |
| #define TX_DEMAND 0x00800000 |
| #define TX_STOP 0x00010000 |
| #define RX_ENABLE 0x00000080 |
| |
| #define SDMA_RX_ABORT (1 << 15) |
| #define SDMA_TX_ABORT (1 << 31) |
| #define MPSC_TX_ABORT (1 << 7) |
| #define MPSC_RX_ABORT (1 << 23) |
| #define MPSC_ENTER_HUNT (1 << 31) |
| |
| /* MPSC defines */ |
| |
| #define GALMPSC_CONNECT 0x1 |
| #define GALMPSC_DISCONNECT 0x0 |
| |
| #define GALMPSC_UART 0x1 |
| |
| #define GALMPSC_STOP_BITS_1 0x0 |
| #define GALMPSC_STOP_BITS_2 0x1 |
| #define GALMPSC_CHAR_LENGTH_8 0x3 |
| #define GALMPSC_CHAR_LENGTH_7 0x2 |
| |
| #define GALMPSC_PARITY_ODD 0x0 |
| #define GALMPSC_PARITY_EVEN 0x2 |
| #define GALMPSC_PARITY_MARK 0x3 |
| #define GALMPSC_PARITY_SPACE 0x1 |
| #define GALMPSC_PARITY_NONE -1 |
| |
| #define GALMPSC_SERIAL_MULTIPLEX SERIAL_PORT_MULTIPLEX /* 0xf010 */ |
| #define GALMPSC_ROUTING_REGISTER MAIN_ROUTING_REGISTER /* 0xb400 */ |
| #define GALMPSC_RxC_ROUTE RECEIVE_CLOCK_ROUTING_REGISTER /* 0xb404 */ |
| #define GALMPSC_TxC_ROUTE TRANSMIT_CLOCK_ROUTING_REGISTER /* 0xb408 */ |
| #define GALMPSC_MCONF_LOW MPSC0_MAIN_CONFIGURATION_LOW /* 0x8000 */ |
| #define GALMPSC_MCONF_HIGH MPSC0_MAIN_CONFIGURATION_HIGH /* 0x8004 */ |
| #define GALMPSC_PROTOCONF_REG MPSC0_PROTOCOL_CONFIGURATION /* 0x8008 */ |
| |
| #define GALMPSC_REG_GAP 0x1000 |
| |
| #define GALMPSC_MCONF_CHREG_BASE CHANNEL0_REGISTER1 /* 0x800c */ |
| #define GALMPSC_CHANNELREG_1 CHANNEL0_REGISTER1 /* 0x800c */ |
| #define GALMPSC_CHANNELREG_2 CHANNEL0_REGISTER2 /* 0x8010 */ |
| #define GALMPSC_CHANNELREG_3 CHANNEL0_REGISTER3 /* 0x8014 */ |
| #define GALMPSC_CHANNELREG_4 CHANNEL0_REGISTER4 /* 0x8018 */ |
| #define GALMPSC_CHANNELREG_5 CHANNEL0_REGISTER5 /* 0x801c */ |
| #define GALMPSC_CHANNELREG_6 CHANNEL0_REGISTER6 /* 0x8020 */ |
| #define GALMPSC_CHANNELREG_7 CHANNEL0_REGISTER7 /* 0x8024 */ |
| #define GALMPSC_CHANNELREG_8 CHANNEL0_REGISTER8 /* 0x8028 */ |
| #define GALMPSC_CHANNELREG_9 CHANNEL0_REGISTER9 /* 0x802c */ |
| #define GALMPSC_CHANNELREG_10 CHANNEL0_REGISTER10 /* 0x8030 */ |
| #define GALMPSC_CHANNELREG_11 CHANNEL0_REGISTER11 /* 0x8034 */ |
| |
| #define GALSDMA_COMMAND_FIRST (1 << 16) |
| #define GALSDMA_COMMAND_LAST (1 << 17) |
| #define GALSDMA_COMMAND_ENABLEINT (1 << 23) |
| #define GALSDMA_COMMAND_AUTO (1 << 30) |
| #define GALSDMA_COMMAND_OWNER (1 << 31) |
| |
| #define GALSDMA_RX 0 |
| #define GALSDMA_TX 1 |
| |
| /* CHANNEL2 should be CHANNEL1, according to documentation, |
| * but to work with the current GTREGS file... |
| */ |
| #define GALSDMA_0_CONF_REG CHANNEL0_CONFIGURATION_REGISTER /* 0x4000 */ |
| #define GALSDMA_1_CONF_REG CHANNEL2_CONFIGURATION_REGISTER /* 0x6000 */ |
| #define GALSDMA_0_COM_REG CHANNEL0_COMMAND_REGISTER /* 0x4008 */ |
| #define GALSDMA_1_COM_REG CHANNEL2_COMMAND_REGISTER /* 0x6008 */ |
| #define GALSDMA_0_CUR_RX_PTR CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER /* 0x4810 */ |
| #define GALSDMA_0_CUR_TX_PTR CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER /* 0x4c10 */ |
| #define GALSDMA_0_FIR_TX_PTR CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER /* 0x4c14 */ |
| #define GALSDMA_1_CUR_RX_PTR CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER /* 0x6810 */ |
| #define GALSDMA_1_CUR_TX_PTR CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER /* 0x6c10 */ |
| #define GALSDMA_1_FIR_TX_PTR CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER /* 0x6c14 */ |
| #define GALSDMA_REG_DIFF 0x2000 |
| |
| /* WRONG in gt64260R.h */ |
| #define GALSDMA_INT_CAUSE 0xb800 /* SDMA_CAUSE */ |
| #define GALSDMA_INT_MASK 0xb880 /* SDMA_MASK */ |
| #define GALMPSC_0_INT_CAUSE 0xb804 |
| #define GALMPSC_0_INT_MASK 0xb884 |
| |
| #define GALSDMA_MODE_UART 0 |
| #define GALSDMA_MODE_BISYNC 1 |
| #define GALSDMA_MODE_HDLC 2 |
| #define GALSDMA_MODE_TRANSPARENT 3 |
| |
| #define GALBRG_0_CONFREG BRG0_CONFIGURATION_REGISTER /* 0xb200 */ |
| #define GALBRG_REG_GAP 0x0008 |
| #define GALBRG_0_BTREG BRG0_BAUDE_TUNING_REGISTER /* 0xb204 */ |
| |
| #endif /* __MPSC_H__ */ |