| /dts-v1/; |
| |
| / { |
| model = "sandbox"; |
| compatible = "sandbox"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| console = &uart0; |
| eth0 = "/eth@10002000"; |
| eth3 = ð_3; |
| eth5 = ð_5; |
| i2c0 = "/i2c@0"; |
| mmc0 = "/mmc0"; |
| mmc1 = "/mmc1"; |
| pci0 = &pci0; |
| pci1 = &pci1; |
| pci2 = &pci2; |
| remoteproc1 = &rproc_1; |
| remoteproc2 = &rproc_2; |
| rtc0 = &rtc_0; |
| rtc1 = &rtc_1; |
| spi0 = "/spi@0"; |
| testfdt6 = "/e-test"; |
| testbus3 = "/some-bus"; |
| testfdt0 = "/some-bus/c-test@0"; |
| testfdt1 = "/some-bus/c-test@1"; |
| testfdt3 = "/b-test"; |
| testfdt5 = "/some-bus/c-test@5"; |
| testfdt8 = "/a-test"; |
| fdt-dummy0 = "/translation-test@8000/dev@0,0"; |
| fdt-dummy1 = "/translation-test@8000/dev@1,100"; |
| fdt-dummy2 = "/translation-test@8000/dev@2,200"; |
| fdt-dummy3 = "/translation-test@8000/noxlatebus@3,300/dev@42"; |
| usb0 = &usb_0; |
| usb1 = &usb_1; |
| usb2 = &usb_2; |
| axi0 = &axi; |
| }; |
| |
| a-test { |
| reg = <0 1>; |
| compatible = "denx,u-boot-fdt-test"; |
| ping-expect = <0>; |
| ping-add = <0>; |
| u-boot,dm-pre-reloc; |
| test-gpios = <&gpio_a 1>, <&gpio_a 4>, <&gpio_b 5 0 3 2 1>, |
| <0>, <&gpio_a 12>; |
| test2-gpios = <&gpio_a 1>, <&gpio_a 4>, <&gpio_b 6 1 3 2 1>, |
| <&gpio_b 7 2 3 2 1>, <&gpio_b 8 4 3 2 1>, |
| <&gpio_b 9 0xc 3 2 1>; |
| }; |
| |
| junk { |
| reg = <1 1>; |
| compatible = "not,compatible"; |
| }; |
| |
| no-compatible { |
| reg = <2 1>; |
| }; |
| |
| bind-test { |
| bind-test-child1 { |
| compatible = "sandbox,phy"; |
| #phy-cells = <1>; |
| }; |
| |
| bind-test-child2 { |
| compatible = "simple-bus"; |
| }; |
| }; |
| |
| b-test { |
| reg = <3 1>; |
| compatible = "denx,u-boot-fdt-test"; |
| ping-expect = <3>; |
| ping-add = <3>; |
| }; |
| |
| phy_provider0: gen_phy@0 { |
| compatible = "sandbox,phy"; |
| #phy-cells = <1>; |
| }; |
| |
| phy_provider1: gen_phy@1 { |
| compatible = "sandbox,phy"; |
| #phy-cells = <0>; |
| broken; |
| }; |
| |
| gen_phy_user: gen_phy_user { |
| compatible = "simple-bus"; |
| phys = <&phy_provider0 0>, <&phy_provider0 1>, <&phy_provider1>; |
| phy-names = "phy1", "phy2", "phy3"; |
| }; |
| |
| some-bus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "denx,u-boot-test-bus"; |
| reg = <3 1>; |
| ping-expect = <4>; |
| ping-add = <4>; |
| c-test@5 { |
| compatible = "denx,u-boot-fdt-test"; |
| reg = <5>; |
| ping-expect = <5>; |
| ping-add = <5>; |
| }; |
| c-test@0 { |
| compatible = "denx,u-boot-fdt-test"; |
| reg = <0>; |
| ping-expect = <6>; |
| ping-add = <6>; |
| }; |
| c-test@1 { |
| compatible = "denx,u-boot-fdt-test"; |
| reg = <1>; |
| ping-expect = <7>; |
| ping-add = <7>; |
| }; |
| }; |
| |
| d-test { |
| reg = <3 1>; |
| ping-expect = <6>; |
| ping-add = <6>; |
| compatible = "google,another-fdt-test"; |
| }; |
| |
| e-test { |
| reg = <3 1>; |
| ping-expect = <6>; |
| ping-add = <6>; |
| compatible = "google,another-fdt-test"; |
| }; |
| |
| f-test { |
| compatible = "denx,u-boot-fdt-test"; |
| }; |
| |
| g-test { |
| compatible = "denx,u-boot-fdt-test"; |
| }; |
| |
| clocks { |
| clk_fixed: clk-fixed { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <1234>; |
| }; |
| }; |
| |
| clk_sandbox: clk-sbox { |
| compatible = "sandbox,clk"; |
| #clock-cells = <1>; |
| }; |
| |
| clk-test { |
| compatible = "sandbox,clk-test"; |
| clocks = <&clk_fixed>, |
| <&clk_sandbox 1>, |
| <&clk_sandbox 0>; |
| clock-names = "fixed", "i2c", "spi"; |
| }; |
| |
| eth@10002000 { |
| compatible = "sandbox,eth"; |
| reg = <0x10002000 0x1000>; |
| fake-host-hwaddr = [00 00 66 44 22 00]; |
| }; |
| |
| eth_5: eth@10003000 { |
| compatible = "sandbox,eth"; |
| reg = <0x10003000 0x1000>; |
| fake-host-hwaddr = [00 00 66 44 22 11]; |
| }; |
| |
| eth_3: sbe5 { |
| compatible = "sandbox,eth"; |
| reg = <0x10005000 0x1000>; |
| fake-host-hwaddr = [00 00 66 44 22 33]; |
| }; |
| |
| eth@10004000 { |
| compatible = "sandbox,eth"; |
| reg = <0x10004000 0x1000>; |
| fake-host-hwaddr = [00 00 66 44 22 22]; |
| }; |
| |
| gpio_a: base-gpios { |
| compatible = "sandbox,gpio"; |
| gpio-controller; |
| #gpio-cells = <1>; |
| gpio-bank-name = "a"; |
| sandbox,gpio-count = <20>; |
| }; |
| |
| gpio_b: extra-gpios { |
| compatible = "sandbox,gpio"; |
| gpio-controller; |
| #gpio-cells = <5>; |
| gpio-bank-name = "b"; |
| sandbox,gpio-count = <10>; |
| }; |
| |
| i2c@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0 1>; |
| compatible = "sandbox,i2c"; |
| clock-frequency = <100000>; |
| eeprom@2c { |
| reg = <0x2c>; |
| compatible = "i2c-eeprom"; |
| emul { |
| compatible = "sandbox,i2c-eeprom"; |
| sandbox,filename = "i2c.bin"; |
| sandbox,size = <256>; |
| }; |
| }; |
| |
| rtc_0: rtc@43 { |
| reg = <0x43>; |
| compatible = "sandbox-rtc"; |
| emul { |
| compatible = "sandbox,i2c-rtc"; |
| }; |
| }; |
| |
| rtc_1: rtc@61 { |
| reg = <0x61>; |
| compatible = "sandbox-rtc"; |
| emul { |
| compatible = "sandbox,i2c-rtc"; |
| }; |
| }; |
| |
| sandbox_pmic: sandbox_pmic { |
| reg = <0x40>; |
| }; |
| |
| mc34708: pmic@41 { |
| reg = <0x41>; |
| }; |
| }; |
| |
| adc@0 { |
| compatible = "sandbox,adc"; |
| vdd-supply = <&buck2>; |
| vss-microvolts = <0>; |
| }; |
| |
| lcd { |
| u-boot,dm-pre-reloc; |
| compatible = "sandbox,lcd-sdl"; |
| xres = <1366>; |
| yres = <768>; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| iracibble { |
| gpios = <&gpio_a 1 0>; |
| label = "sandbox:red"; |
| }; |
| |
| martinet { |
| gpios = <&gpio_a 2 0>; |
| label = "sandbox:green"; |
| }; |
| |
| default_on { |
| gpios = <&gpio_a 5 0>; |
| label = "sandbox:default_on"; |
| default-state = "on"; |
| }; |
| |
| default_off { |
| gpios = <&gpio_a 6 0>; |
| label = "sandbox:default_off"; |
| default-state = "off"; |
| }; |
| }; |
| |
| mbox: mbox { |
| compatible = "sandbox,mbox"; |
| #mbox-cells = <1>; |
| }; |
| |
| mbox-test { |
| compatible = "sandbox,mbox-test"; |
| mboxes = <&mbox 100>, <&mbox 1>; |
| mbox-names = "other", "test"; |
| }; |
| |
| misc-test { |
| compatible = "sandbox,misc_sandbox"; |
| }; |
| |
| mmc2 { |
| compatible = "sandbox,mmc"; |
| }; |
| |
| mmc1 { |
| compatible = "sandbox,mmc"; |
| }; |
| |
| mmc0 { |
| compatible = "sandbox,mmc"; |
| }; |
| |
| pci0: pci-controller0 { |
| compatible = "sandbox,pci"; |
| device_type = "pci"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges = <0x02000000 0 0x10000000 0x10000000 0 0x2000 |
| 0x01000000 0 0x20000000 0x20000000 0 0x2000>; |
| pci@0,0 { |
| compatible = "pci-generic"; |
| reg = <0x0000 0 0 0 0>; |
| emul@0,0 { |
| compatible = "sandbox,swap-case"; |
| }; |
| }; |
| pci@1f,0 { |
| compatible = "pci-generic"; |
| reg = <0xf800 0 0 0 0>; |
| emul@1f,0 { |
| compatible = "sandbox,swap-case"; |
| }; |
| }; |
| }; |
| |
| pci1: pci-controller1 { |
| compatible = "sandbox,pci"; |
| device_type = "pci"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges = <0x02000000 0 0x30000000 0x30000000 0 0x2000 |
| 0x01000000 0 0x40000000 0x40000000 0 0x2000>; |
| sandbox,dev-info = <0x08 0x00 0x1234 0x5678 |
| 0x0c 0x00 0x1234 0x5678>; |
| }; |
| |
| pci2: pci-controller2 { |
| compatible = "sandbox,pci"; |
| device_type = "pci"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges = <0x02000000 0 0x50000000 0x50000000 0 0x2000 |
| 0x01000000 0 0x60000000 0x60000000 0 0x2000>; |
| sandbox,dev-info = <0x08 0x00 0x1234 0x5678>; |
| pci@1f,0 { |
| compatible = "pci-generic"; |
| reg = <0xf800 0 0 0 0>; |
| emul@1f,0 { |
| compatible = "sandbox,swap-case"; |
| }; |
| }; |
| }; |
| |
| probing { |
| compatible = "simple-bus"; |
| test1 { |
| compatible = "denx,u-boot-probe-test"; |
| }; |
| |
| test2 { |
| compatible = "denx,u-boot-probe-test"; |
| }; |
| |
| test3 { |
| compatible = "denx,u-boot-probe-test"; |
| }; |
| |
| test4 { |
| compatible = "denx,u-boot-probe-test"; |
| }; |
| }; |
| |
| pwrdom: power-domain { |
| compatible = "sandbox,power-domain"; |
| #power-domain-cells = <1>; |
| }; |
| |
| power-domain-test { |
| compatible = "sandbox,power-domain-test"; |
| power-domains = <&pwrdom 2>; |
| }; |
| |
| pwm { |
| compatible = "sandbox,pwm"; |
| }; |
| |
| pwm2 { |
| compatible = "sandbox,pwm"; |
| }; |
| |
| ram { |
| compatible = "sandbox,ram"; |
| }; |
| |
| reset@0 { |
| compatible = "sandbox,warm-reset"; |
| }; |
| |
| reset@1 { |
| compatible = "sandbox,reset"; |
| }; |
| |
| resetc: reset-ctl { |
| compatible = "sandbox,reset-ctl"; |
| #reset-cells = <1>; |
| }; |
| |
| reset-ctl-test { |
| compatible = "sandbox,reset-ctl-test"; |
| resets = <&resetc 100>, <&resetc 2>; |
| reset-names = "other", "test"; |
| }; |
| |
| rproc_1: rproc@1 { |
| compatible = "sandbox,test-processor"; |
| remoteproc-name = "remoteproc-test-dev1"; |
| }; |
| |
| rproc_2: rproc@2 { |
| compatible = "sandbox,test-processor"; |
| internal-memory-mapped; |
| remoteproc-name = "remoteproc-test-dev2"; |
| }; |
| |
| smem@0 { |
| compatible = "sandbox,smem"; |
| }; |
| |
| spi@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0 1>; |
| compatible = "sandbox,spi"; |
| cs-gpios = <0>, <&gpio_a 0>; |
| spi.bin@0 { |
| reg = <0>; |
| compatible = "spansion,m25p16", "spi-flash"; |
| spi-max-frequency = <40000000>; |
| sandbox,filename = "spi.bin"; |
| }; |
| }; |
| |
| syscon@0 { |
| compatible = "sandbox,syscon0"; |
| reg = <0x10 4>; |
| }; |
| |
| syscon@1 { |
| compatible = "sandbox,syscon1"; |
| reg = <0x20 5 |
| 0x28 6 |
| 0x30 7 |
| 0x38 8>; |
| }; |
| |
| syscon@2 { |
| compatible = "simple-mfd", "syscon"; |
| reg = <0x40 5 |
| 0x48 6 |
| 0x50 7 |
| 0x58 8>; |
| }; |
| |
| timer { |
| compatible = "sandbox,timer"; |
| clock-frequency = <1000000>; |
| }; |
| |
| tpm2 { |
| compatible = "sandbox,tpm2"; |
| }; |
| |
| uart0: serial { |
| compatible = "sandbox,serial"; |
| u-boot,dm-pre-reloc; |
| }; |
| |
| usb_0: usb@0 { |
| compatible = "sandbox,usb"; |
| status = "disabled"; |
| hub { |
| compatible = "sandbox,usb-hub"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| flash-stick { |
| reg = <0>; |
| compatible = "sandbox,usb-flash"; |
| }; |
| }; |
| }; |
| |
| usb_1: usb@1 { |
| compatible = "sandbox,usb"; |
| hub { |
| compatible = "usb-hub"; |
| usb,device-class = <9>; |
| hub-emul { |
| compatible = "sandbox,usb-hub"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| flash-stick@0 { |
| reg = <0>; |
| compatible = "sandbox,usb-flash"; |
| sandbox,filepath = "testflash.bin"; |
| }; |
| |
| flash-stick@1 { |
| reg = <1>; |
| compatible = "sandbox,usb-flash"; |
| sandbox,filepath = "testflash1.bin"; |
| }; |
| |
| flash-stick@2 { |
| reg = <2>; |
| compatible = "sandbox,usb-flash"; |
| sandbox,filepath = "testflash2.bin"; |
| }; |
| |
| keyb@3 { |
| reg = <3>; |
| compatible = "sandbox,usb-keyb"; |
| }; |
| |
| }; |
| }; |
| }; |
| |
| usb_2: usb@2 { |
| compatible = "sandbox,usb"; |
| status = "disabled"; |
| }; |
| |
| spmi: spmi@0 { |
| compatible = "sandbox,spmi"; |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| pm8916@0 { |
| compatible = "qcom,spmi-pmic"; |
| reg = <0x0 0x1>; |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| |
| spmi_gpios: gpios@c000 { |
| compatible = "qcom,pm8916-gpio"; |
| reg = <0xc000 0x400>; |
| gpio-controller; |
| gpio-count = <4>; |
| #gpio-cells = <2>; |
| gpio-bank-name="spmi"; |
| }; |
| }; |
| }; |
| |
| wdt0: wdt@0 { |
| compatible = "sandbox,wdt"; |
| }; |
| |
| axi: axi@0 { |
| compatible = "sandbox,axi"; |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| store@0 { |
| compatible = "sandbox,sandbox_store"; |
| reg = <0x0 0x400>; |
| }; |
| }; |
| |
| chosen { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| chosen-test { |
| compatible = "denx,u-boot-fdt-test"; |
| reg = <9 1>; |
| }; |
| }; |
| |
| translation-test@8000 { |
| compatible = "simple-bus"; |
| reg = <0x8000 0x4000>; |
| |
| #address-cells = <0x2>; |
| #size-cells = <0x1>; |
| |
| ranges = <0 0x0 0x8000 0x1000 |
| 1 0x100 0x9000 0x1000 |
| 2 0x200 0xA000 0x1000 |
| 3 0x300 0xB000 0x1000 |
| >; |
| |
| dev@0,0 { |
| compatible = "denx,u-boot-fdt-dummy"; |
| reg = <0 0x0 0x1000>; |
| }; |
| |
| dev@1,100 { |
| compatible = "denx,u-boot-fdt-dummy"; |
| reg = <1 0x100 0x1000>; |
| |
| }; |
| |
| dev@2,200 { |
| compatible = "denx,u-boot-fdt-dummy"; |
| reg = <2 0x200 0x1000>; |
| }; |
| |
| |
| noxlatebus@3,300 { |
| compatible = "simple-bus"; |
| reg = <3 0x300 0x1000>; |
| |
| #address-cells = <0x1>; |
| #size-cells = <0x0>; |
| |
| dev@42 { |
| compatible = "denx,u-boot-fdt-dummy"; |
| reg = <0x42>; |
| }; |
| }; |
| }; |
| }; |
| |
| #include "sandbox_pmic.dtsi" |