| /* |
| * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <dt-bindings/clock/bcm3380-clock.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/reset/bcm3380-reset.h> |
| #include "skeleton.dtsi" |
| |
| / { |
| compatible = "brcm,bcm3380"; |
| |
| cpus { |
| reg = <0x14e00000 0x4>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| u-boot,dm-pre-reloc; |
| |
| cpu@0 { |
| compatible = "brcm,bcm3380-cpu", "mips,mips4Kc"; |
| device_type = "cpu"; |
| reg = <0>; |
| u-boot,dm-pre-reloc; |
| }; |
| |
| cpu@1 { |
| compatible = "brcm,bcm3380-cpu", "mips,mips4Kc"; |
| device_type = "cpu"; |
| reg = <1>; |
| u-boot,dm-pre-reloc; |
| }; |
| }; |
| |
| clocks { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| u-boot,dm-pre-reloc; |
| |
| periph_osc: periph-osc { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <48000000>; |
| u-boot,dm-pre-reloc; |
| }; |
| |
| periph_clk0: periph-clk@14e00004 { |
| compatible = "brcm,bcm6345-clk"; |
| reg = <0x14e00004 0x4>; |
| #clock-cells = <1>; |
| }; |
| |
| periph_clk1: periph-clk@14e00008 { |
| compatible = "brcm,bcm6345-clk"; |
| reg = <0x14e00008 0x4>; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| ubus { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| u-boot,dm-pre-reloc; |
| |
| memory-controller@12000000 { |
| compatible = "brcm,bcm6328-mc"; |
| reg = <0x12000000 0x1000>; |
| u-boot,dm-pre-reloc; |
| }; |
| |
| periph_rst0: reset-controller@14e0008c { |
| compatible = "brcm,bcm6345-reset"; |
| reg = <0x14e0008c 0x4>; |
| #reset-cells = <1>; |
| }; |
| |
| periph_rst1: reset-controller@14e00090 { |
| compatible = "brcm,bcm6345-reset"; |
| reg = <0x14e00090 0x4>; |
| #reset-cells = <1>; |
| }; |
| |
| pll_cntl: syscon@14e00094 { |
| compatible = "syscon"; |
| reg = <0x14e00094 0x4>; |
| }; |
| |
| syscon-reboot { |
| compatible = "syscon-reboot"; |
| regmap = <&pll_cntl>; |
| offset = <0x0>; |
| mask = <0x1>; |
| }; |
| |
| wdt: watchdog@14e000dc { |
| compatible = "brcm,bcm6345-wdt"; |
| reg = <0x14e000dc 0xc>; |
| |
| clocks = <&periph_osc>; |
| }; |
| |
| wdt-reboot { |
| compatible = "wdt-reboot"; |
| wdt = <&wdt>; |
| }; |
| |
| gpio0: gpio-controller@14e00100 { |
| compatible = "brcm,bcm6345-gpio"; |
| reg = <0x14e00100 0x4>, <0x14e00108 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| status = "disabled"; |
| }; |
| |
| gpio1: gpio-controller@14e00104 { |
| compatible = "brcm,bcm6345-gpio"; |
| reg = <0x14e00104 0x4>, <0x14e0010c 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <3>; |
| |
| status = "disabled"; |
| }; |
| |
| uart0: serial@14e00200 { |
| compatible = "brcm,bcm6345-uart"; |
| reg = <0x14e00200 0x18>; |
| clocks = <&periph_osc>; |
| |
| status = "disabled"; |
| }; |
| |
| uart1: serial@14e00220 { |
| compatible = "brcm,bcm6345-uart"; |
| reg = <0x14e00220 0x18>; |
| clocks = <&periph_osc>; |
| |
| status = "disabled"; |
| }; |
| |
| leds: led-controller@14e00f00 { |
| compatible = "brcm,bcm6328-leds"; |
| reg = <0x14e00f00 0x1c>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| }; |
| }; |