| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright (C) 2013 Samsung Electronics |
| * Hyungwon Hwang <human.hwang@samsung.com> |
| */ |
| |
| #ifndef __CONFIG_ODROID_XU3_H |
| #define __CONFIG_ODROID_XU3_H |
| |
| #include <configs/exynos5420-common.h> |
| #include <configs/exynos5-common.h> |
| |
| #define CONFIG_BOARD_COMMON |
| |
| #define CONFIG_SYS_SDRAM_BASE 0x40000000 |
| |
| #define TZPC_BASE_OFFSET 0x10000 |
| |
| #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ |
| /* Reserve the last 22 MiB for the secure firmware */ |
| #define CONFIG_SYS_MEM_TOP_HIDE (22UL << 20UL) |
| #define CONFIG_TZSW_RESERVED_DRAM_SIZE CONFIG_SYS_MEM_TOP_HIDE |
| |
| #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) |
| |
| /* USB */ |
| #define CONFIG_USB_EHCI_EXYNOS |
| |
| /* DFU */ |
| #define DFU_DEFAULT_POLL_TIMEOUT 300 |
| #define DFU_MANIFEST_POLL_TIMEOUT 25000 |
| |
| /* THOR */ |
| #define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_USB_GADGET_VENDOR_NUM |
| #define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D |
| |
| /* UMS */ |
| #define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 |
| #define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 |
| |
| /* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */ |
| #undef CONFIG_EXYNOS_TMU |
| |
| #define CONFIG_DFU_ALT_SYSTEM \ |
| "uImage fat 0 1;" \ |
| "zImage fat 0 1;" \ |
| "Image.itb fat 0 1;" \ |
| "uInitrd fat 0 1;" \ |
| "boot.scr fat 0 1;" \ |
| "boot.cmd fat 0 1;" \ |
| "exynos5422-odroidxu3.dtb fat 0 1;" \ |
| "exynos5422-odroidxu3-lite.dtb fat 0 1;" \ |
| "exynos5422-odroidxu4.dtb fat 0 1;" \ |
| "exynos5422-odroidhc1.dtb fat 0 1;" \ |
| "boot part 0 1;" \ |
| "root part 0 2\0" |
| |
| #define CONFIG_DFU_ALT_BOOT_EMMC \ |
| "u-boot raw 0x3e 0x800 mmcpart 1;" \ |
| "bl1 raw 0x0 0x1e mmcpart 1;" \ |
| "bl2 raw 0x1e 0x1d mmcpart 1;" \ |
| "tzsw raw 0x83e 0x200 mmcpart 1;" \ |
| "params.bin raw 0x1880 0x20\0" |
| |
| #define CONFIG_DFU_ALT_BOOT_SD \ |
| "u-boot raw 0x3f 0x800;" \ |
| "bl1 raw 0x1 0x1e;" \ |
| "bl2 raw 0x1f 0x1d;" \ |
| "tzsw raw 0x83f 0x200;" \ |
| "params.bin raw 0x1880 0x20\0" |
| |
| /* Enable: board/samsung/common/misc.c to use set_dfu_alt_info() */ |
| #define CONFIG_MISC_COMMON |
| #define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K) |
| |
| /* Set soc_rev, soc_id, board_rev, board_name, fdtfile */ |
| #define CONFIG_ODROID_REV_AIN 9 |
| |
| /* |
| * Need to override existing one (smdk5420) with odroid so set_board_info will |
| * use proper prefix when creating full board_name (SYS_BOARD + type) |
| */ |
| |
| /* Define new extra env settings, including DFU settings */ |
| #undef CONFIG_EXTRA_ENV_SETTINGS |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| EXYNOS_DEVICE_SETTINGS \ |
| EXYNOS_FDTFILE_SETTING \ |
| MEM_LAYOUT_ENV_SETTINGS \ |
| BOOTENV \ |
| "rootfstype=ext4\0" \ |
| "console=console=ttySAC2,115200n8\0" \ |
| "fdtfile=exynos5422-odroidxu3.dtb\0" \ |
| "board_name=odroidxu3\0" \ |
| "mmcbootdev=0\0" \ |
| "mmcrootdev=0\0" \ |
| "mmcbootpart=1\0" \ |
| "mmcrootpart=2\0" \ |
| "dfu_alt_system="CONFIG_DFU_ALT_SYSTEM \ |
| "dfu_alt_info=Autoset by THOR/DFU command run.\0" |
| |
| #endif /* __CONFIG_H */ |