| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2016 Freescale Semiconductor, Inc. |
| * Hou Zhiqiang <Zhiqiang.Hou@freescale.com> |
| */ |
| |
| #include <common.h> |
| #include <errno.h> |
| #include <i2c.h> |
| #include <log.h> |
| #include <power/pmic.h> |
| #include <power/mc34vr500_pmic.h> |
| |
| static uint8_t swxvolt_addr[4] = { MC34VR500_SW1VOLT, |
| MC34VR500_SW2VOLT, |
| MC34VR500_SW3VOLT, |
| MC34VR500_SW4VOLT }; |
| |
| static uint8_t swx_set_point_base[4] = { 13, 9, 9, 9 }; |
| |
| int mc34vr500_get_sw_volt(uint8_t sw) |
| { |
| struct pmic *p; |
| u32 swxvolt; |
| uint8_t spb; |
| int sw_volt; |
| int ret; |
| |
| debug("%s: Get SW%u volt from swxvolt_addr = 0x%x\n", |
| __func__, sw + 1, swxvolt_addr[sw]); |
| if (sw > SW4) { |
| printf("%s: Unsupported SW(sw%d)\n", __func__, sw + 1); |
| return -EINVAL; |
| } |
| |
| p = pmic_get("MC34VR500"); |
| if (!p) { |
| printf("%s: Did NOT find PMIC MC34VR500\n", __func__); |
| return -ENODEV; |
| } |
| |
| ret = pmic_probe(p); |
| if (ret) |
| return ret; |
| |
| ret = pmic_reg_read(p, swxvolt_addr[sw], &swxvolt); |
| if (ret) { |
| printf("%s: Failed to get SW%u volt\n", __func__, sw + 1); |
| return ret; |
| } |
| |
| debug("%s: SW%d step point swxvolt = %u\n", __func__, sw + 1, swxvolt); |
| spb = swx_set_point_base[sw]; |
| /* The base of SW volt is 625mV and increase by step 25mV */ |
| sw_volt = 625 + (swxvolt - spb) * 25; |
| |
| debug("%s: SW%u volt = %dmV\n", __func__, sw + 1, sw_volt); |
| return sw_volt; |
| } |
| |
| int mc34vr500_set_sw_volt(uint8_t sw, int sw_volt) |
| { |
| struct pmic *p; |
| u32 swxvolt; |
| uint8_t spb; |
| int ret; |
| |
| debug("%s: Set SW%u volt to %dmV\n", __func__, sw + 1, sw_volt); |
| /* The least SW volt is 625mV, and only 4 SW outputs */ |
| if (sw > SW4 || sw_volt < 625) |
| return -EINVAL; |
| |
| p = pmic_get("MC34VR500"); |
| if (!p) { |
| printf("%s: Did NOT find PMIC MC34VR500\n", __func__); |
| return -ENODEV; |
| } |
| |
| ret = pmic_probe(p); |
| if (ret) |
| return ret; |
| |
| spb = swx_set_point_base[sw]; |
| /* The base of SW volt is 625mV and increase by step 25mV */ |
| swxvolt = (sw_volt - 625) / 25 + spb; |
| debug("%s: SW%d step point swxvolt = %u\n", __func__, sw + 1, swxvolt); |
| if (swxvolt > 63) |
| return -EINVAL; |
| |
| ret = pmic_reg_write(p, swxvolt_addr[sw], swxvolt); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |