| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2013 - 2015 Xilinx, Inc. |
| * |
| * Xilinx Zynq SD Host Controller Interface |
| */ |
| |
| #include <clk.h> |
| #include <common.h> |
| #include <dm.h> |
| #include <fdtdec.h> |
| #include "mmc_private.h" |
| #include <log.h> |
| #include <dm/device_compat.h> |
| #include <linux/err.h> |
| #include <linux/libfdt.h> |
| #include <malloc.h> |
| #include <sdhci.h> |
| #include <zynqmp_tap_delay.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| struct arasan_sdhci_plat { |
| struct mmc_config cfg; |
| struct mmc mmc; |
| }; |
| |
| struct arasan_sdhci_priv { |
| struct sdhci_host *host; |
| u8 deviceid; |
| u8 bank; |
| }; |
| |
| #if defined(CONFIG_ARCH_ZYNQMP) |
| #define MMC_HS200_BUS_SPEED 5 |
| |
| static const u8 mode2timing[] = { |
| [MMC_LEGACY] = UHS_SDR12_BUS_SPEED, |
| [MMC_HS] = HIGH_SPEED_BUS_SPEED, |
| [SD_HS] = HIGH_SPEED_BUS_SPEED, |
| [MMC_HS_52] = HIGH_SPEED_BUS_SPEED, |
| [MMC_DDR_52] = HIGH_SPEED_BUS_SPEED, |
| [UHS_SDR12] = UHS_SDR12_BUS_SPEED, |
| [UHS_SDR25] = UHS_SDR25_BUS_SPEED, |
| [UHS_SDR50] = UHS_SDR50_BUS_SPEED, |
| [UHS_DDR50] = UHS_DDR50_BUS_SPEED, |
| [UHS_SDR104] = UHS_SDR104_BUS_SPEED, |
| [MMC_HS_200] = MMC_HS200_BUS_SPEED, |
| }; |
| |
| #define SDHCI_TUNING_LOOP_COUNT 40 |
| |
| static void arasan_zynqmp_dll_reset(struct sdhci_host *host, u8 deviceid) |
| { |
| u16 clk; |
| unsigned long timeout; |
| |
| clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); |
| clk &= ~(SDHCI_CLOCK_CARD_EN); |
| sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); |
| |
| /* Issue DLL Reset */ |
| zynqmp_dll_reset(deviceid); |
| |
| /* Wait max 20 ms */ |
| timeout = 100; |
| while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL)) |
| & SDHCI_CLOCK_INT_STABLE)) { |
| if (timeout == 0) { |
| dev_err(mmc_dev(host->mmc), |
| ": Internal clock never stabilised.\n"); |
| return; |
| } |
| timeout--; |
| udelay(1000); |
| } |
| |
| clk |= SDHCI_CLOCK_CARD_EN; |
| sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); |
| } |
| |
| static int arasan_sdhci_execute_tuning(struct mmc *mmc, u8 opcode) |
| { |
| struct mmc_cmd cmd; |
| struct mmc_data data; |
| u32 ctrl; |
| struct sdhci_host *host; |
| struct arasan_sdhci_priv *priv = dev_get_priv(mmc->dev); |
| char tuning_loop_counter = SDHCI_TUNING_LOOP_COUNT; |
| u8 deviceid; |
| |
| debug("%s\n", __func__); |
| |
| host = priv->host; |
| deviceid = priv->deviceid; |
| |
| ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); |
| ctrl |= SDHCI_CTRL_EXEC_TUNING; |
| sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); |
| |
| mdelay(1); |
| |
| arasan_zynqmp_dll_reset(host, deviceid); |
| |
| sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE); |
| sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE); |
| |
| do { |
| cmd.cmdidx = opcode; |
| cmd.resp_type = MMC_RSP_R1; |
| cmd.cmdarg = 0; |
| |
| data.blocksize = 64; |
| data.blocks = 1; |
| data.flags = MMC_DATA_READ; |
| |
| if (tuning_loop_counter-- == 0) |
| break; |
| |
| if (cmd.cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200 && |
| mmc->bus_width == 8) |
| data.blocksize = 128; |
| |
| sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG, |
| data.blocksize), |
| SDHCI_BLOCK_SIZE); |
| sdhci_writew(host, data.blocks, SDHCI_BLOCK_COUNT); |
| sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE); |
| |
| mmc_send_cmd(mmc, &cmd, NULL); |
| ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); |
| |
| if (cmd.cmdidx == MMC_CMD_SEND_TUNING_BLOCK) |
| udelay(1); |
| |
| } while (ctrl & SDHCI_CTRL_EXEC_TUNING); |
| |
| if (tuning_loop_counter < 0) { |
| ctrl &= ~SDHCI_CTRL_TUNED_CLK; |
| sdhci_writel(host, ctrl, SDHCI_HOST_CONTROL2); |
| } |
| |
| if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) { |
| printf("%s:Tuning failed\n", __func__); |
| return -1; |
| } |
| |
| udelay(1); |
| arasan_zynqmp_dll_reset(host, deviceid); |
| |
| /* Enable only interrupts served by the SD controller */ |
| sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK, |
| SDHCI_INT_ENABLE); |
| /* Mask all sdhci interrupt sources */ |
| sdhci_writel(host, 0x0, SDHCI_SIGNAL_ENABLE); |
| |
| return 0; |
| } |
| |
| static void arasan_sdhci_set_tapdelay(struct sdhci_host *host) |
| { |
| struct arasan_sdhci_priv *priv = dev_get_priv(host->mmc->dev); |
| struct mmc *mmc = (struct mmc *)host->mmc; |
| u8 uhsmode; |
| |
| uhsmode = mode2timing[mmc->selected_mode]; |
| |
| if (uhsmode >= UHS_SDR25_BUS_SPEED) |
| arasan_zynqmp_set_tapdelay(priv->deviceid, uhsmode, |
| priv->bank); |
| } |
| |
| static void arasan_sdhci_set_control_reg(struct sdhci_host *host) |
| { |
| struct mmc *mmc = (struct mmc *)host->mmc; |
| u32 reg; |
| |
| if (!IS_SD(mmc)) |
| return; |
| |
| if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180) { |
| reg = sdhci_readw(host, SDHCI_HOST_CONTROL2); |
| reg |= SDHCI_CTRL_VDD_180; |
| sdhci_writew(host, reg, SDHCI_HOST_CONTROL2); |
| } |
| |
| if (mmc->selected_mode > SD_HS && |
| mmc->selected_mode <= UHS_DDR50) |
| sdhci_set_uhs_timing(host); |
| } |
| #endif |
| |
| #if defined(CONFIG_ARCH_ZYNQMP) |
| const struct sdhci_ops arasan_ops = { |
| .platform_execute_tuning = &arasan_sdhci_execute_tuning, |
| .set_delay = &arasan_sdhci_set_tapdelay, |
| .set_control_reg = &arasan_sdhci_set_control_reg, |
| }; |
| #endif |
| |
| static int arasan_sdhci_probe(struct udevice *dev) |
| { |
| struct arasan_sdhci_plat *plat = dev_get_platdata(dev); |
| struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); |
| struct arasan_sdhci_priv *priv = dev_get_priv(dev); |
| struct sdhci_host *host; |
| struct clk clk; |
| unsigned long clock; |
| int ret; |
| |
| host = priv->host; |
| |
| ret = clk_get_by_index(dev, 0, &clk); |
| if (ret < 0) { |
| dev_err(dev, "failed to get clock\n"); |
| return ret; |
| } |
| |
| clock = clk_get_rate(&clk); |
| if (IS_ERR_VALUE(clock)) { |
| dev_err(dev, "failed to get rate\n"); |
| return clock; |
| } |
| |
| debug("%s: CLK %ld\n", __func__, clock); |
| |
| ret = clk_enable(&clk); |
| if (ret && ret != -ENOSYS) { |
| dev_err(dev, "failed to enable clock\n"); |
| return ret; |
| } |
| |
| host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD | |
| SDHCI_QUIRK_BROKEN_R1B; |
| |
| #ifdef CONFIG_ZYNQ_HISPD_BROKEN |
| host->quirks |= SDHCI_QUIRK_BROKEN_HISPD_MODE; |
| #endif |
| |
| plat->cfg.f_max = CONFIG_ZYNQ_SDHCI_MAX_FREQ; |
| |
| ret = mmc_of_parse(dev, &plat->cfg); |
| if (ret) |
| return ret; |
| |
| host->max_clk = clock; |
| |
| host->mmc = &plat->mmc; |
| host->mmc->dev = dev; |
| host->mmc->priv = host; |
| |
| ret = sdhci_setup_cfg(&plat->cfg, host, plat->cfg.f_max, |
| CONFIG_ZYNQ_SDHCI_MIN_FREQ); |
| if (ret) |
| return ret; |
| upriv->mmc = host->mmc; |
| |
| return sdhci_probe(dev); |
| } |
| |
| static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct arasan_sdhci_priv *priv = dev_get_priv(dev); |
| |
| priv->host = calloc(1, sizeof(struct sdhci_host)); |
| if (!priv->host) |
| return -1; |
| |
| priv->host->name = dev->name; |
| |
| #if defined(CONFIG_ARCH_ZYNQMP) |
| priv->host->ops = &arasan_ops; |
| #endif |
| |
| priv->host->ioaddr = (void *)dev_read_addr(dev); |
| if (IS_ERR(priv->host->ioaddr)) |
| return PTR_ERR(priv->host->ioaddr); |
| |
| priv->deviceid = dev_read_u32_default(dev, "xlnx,device_id", -1); |
| priv->bank = dev_read_u32_default(dev, "xlnx,mio_bank", -1); |
| |
| return 0; |
| } |
| |
| static int arasan_sdhci_bind(struct udevice *dev) |
| { |
| struct arasan_sdhci_plat *plat = dev_get_platdata(dev); |
| |
| return sdhci_bind(dev, &plat->mmc, &plat->cfg); |
| } |
| |
| static const struct udevice_id arasan_sdhci_ids[] = { |
| { .compatible = "arasan,sdhci-8.9a" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(arasan_sdhci_drv) = { |
| .name = "arasan_sdhci", |
| .id = UCLASS_MMC, |
| .of_match = arasan_sdhci_ids, |
| .ofdata_to_platdata = arasan_sdhci_ofdata_to_platdata, |
| .ops = &sdhci_ops, |
| .bind = arasan_sdhci_bind, |
| .probe = arasan_sdhci_probe, |
| .priv_auto_alloc_size = sizeof(struct arasan_sdhci_priv), |
| .platdata_auto_alloc_size = sizeof(struct arasan_sdhci_plat), |
| }; |