| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * TI PHY drivers |
| * |
| */ |
| #include <common.h> |
| #include <log.h> |
| #include <phy.h> |
| #include <dm/devres.h> |
| #include <linux/compat.h> |
| #include <malloc.h> |
| |
| #include <dm.h> |
| #include <dt-bindings/net/ti-dp83867.h> |
| |
| |
| /* TI DP83867 */ |
| #define DP83867_DEVADDR 0x1f |
| |
| #define MII_DP83867_PHYCTRL 0x10 |
| #define MII_DP83867_MICR 0x12 |
| #define MII_DP83867_CFG2 0x14 |
| #define MII_DP83867_BISCR 0x16 |
| #define DP83867_CTRL 0x1f |
| |
| /* Extended Registers */ |
| #define DP83867_CFG4 0x0031 |
| #define DP83867_RGMIICTL 0x0032 |
| #define DP83867_STRAP_STS1 0x006E |
| #define DP83867_STRAP_STS2 0x006f |
| #define DP83867_RGMIIDCTL 0x0086 |
| #define DP83867_IO_MUX_CFG 0x0170 |
| #define DP83867_SGMIICTL 0x00D3 |
| |
| #define DP83867_SW_RESET BIT(15) |
| #define DP83867_SW_RESTART BIT(14) |
| |
| /* MICR Interrupt bits */ |
| #define MII_DP83867_MICR_AN_ERR_INT_EN BIT(15) |
| #define MII_DP83867_MICR_SPEED_CHNG_INT_EN BIT(14) |
| #define MII_DP83867_MICR_DUP_MODE_CHNG_INT_EN BIT(13) |
| #define MII_DP83867_MICR_PAGE_RXD_INT_EN BIT(12) |
| #define MII_DP83867_MICR_AUTONEG_COMP_INT_EN BIT(11) |
| #define MII_DP83867_MICR_LINK_STS_CHNG_INT_EN BIT(10) |
| #define MII_DP83867_MICR_FALSE_CARRIER_INT_EN BIT(8) |
| #define MII_DP83867_MICR_SLEEP_MODE_CHNG_INT_EN BIT(4) |
| #define MII_DP83867_MICR_WOL_INT_EN BIT(3) |
| #define MII_DP83867_MICR_XGMII_ERR_INT_EN BIT(2) |
| #define MII_DP83867_MICR_POL_CHNG_INT_EN BIT(1) |
| #define MII_DP83867_MICR_JABBER_INT_EN BIT(0) |
| |
| /* RGMIICTL bits */ |
| #define DP83867_RGMII_TX_CLK_DELAY_EN BIT(1) |
| #define DP83867_RGMII_RX_CLK_DELAY_EN BIT(0) |
| |
| /* STRAP_STS1 bits */ |
| #define DP83867_STRAP_STS1_RESERVED BIT(11) |
| |
| /* STRAP_STS2 bits */ |
| #define DP83867_STRAP_STS2_CLK_SKEW_TX_MASK GENMASK(6, 4) |
| #define DP83867_STRAP_STS2_CLK_SKEW_TX_SHIFT 4 |
| #define DP83867_STRAP_STS2_CLK_SKEW_RX_MASK GENMASK(2, 0) |
| #define DP83867_STRAP_STS2_CLK_SKEW_RX_SHIFT 0 |
| #define DP83867_STRAP_STS2_CLK_SKEW_NONE BIT(2) |
| |
| /* PHY CTRL bits */ |
| #define DP83867_PHYCR_FIFO_DEPTH_SHIFT 14 |
| #define DP83867_PHYCR_FIFO_DEPTH_MASK GENMASK(15, 14) |
| #define DP83867_PHYCR_RESERVED_MASK BIT(11) |
| #define DP83867_PHYCR_FORCE_LINK_GOOD BIT(10) |
| #define DP83867_MDI_CROSSOVER 5 |
| #define DP83867_MDI_CROSSOVER_MDIX 2 |
| #define DP83867_PHYCTRL_SGMIIEN 0x0800 |
| #define DP83867_PHYCTRL_RXFIFO_SHIFT 12 |
| #define DP83867_PHYCTRL_TXFIFO_SHIFT 14 |
| |
| /* RGMIIDCTL bits */ |
| #define DP83867_RGMII_TX_CLK_DELAY_MAX 0xf |
| #define DP83867_RGMII_TX_CLK_DELAY_SHIFT 4 |
| #define DP83867_RGMII_RX_CLK_DELAY_MAX 0xf |
| |
| /* CFG2 bits */ |
| #define MII_DP83867_CFG2_SPEEDOPT_10EN 0x0040 |
| #define MII_DP83867_CFG2_SGMII_AUTONEGEN 0x0080 |
| #define MII_DP83867_CFG2_SPEEDOPT_ENH 0x0100 |
| #define MII_DP83867_CFG2_SPEEDOPT_CNT 0x0800 |
| #define MII_DP83867_CFG2_SPEEDOPT_INTLOW 0x2000 |
| #define MII_DP83867_CFG2_MASK 0x003F |
| |
| /* User setting - can be taken from DTS */ |
| #define DEFAULT_FIFO_DEPTH DP83867_PHYCR_FIFO_DEPTH_4_B_NIB |
| |
| /* IO_MUX_CFG bits */ |
| #define DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL 0x1f |
| |
| #define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX 0x0 |
| #define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN 0x1f |
| #define DP83867_IO_MUX_CFG_CLK_O_DISABLE BIT(6) |
| #define DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT 8 |
| #define DP83867_IO_MUX_CFG_CLK_O_SEL_MASK \ |
| GENMASK(0x1f, DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT) |
| |
| /* CFG4 bits */ |
| #define DP83867_CFG4_PORT_MIRROR_EN BIT(0) |
| |
| /* SGMIICTL bits */ |
| #define DP83867_SGMII_TYPE BIT(14) |
| |
| enum { |
| DP83867_PORT_MIRRORING_KEEP, |
| DP83867_PORT_MIRRORING_EN, |
| DP83867_PORT_MIRRORING_DIS, |
| }; |
| |
| struct dp83867_private { |
| u32 rx_id_delay; |
| u32 tx_id_delay; |
| int fifo_depth; |
| int io_impedance; |
| bool rxctrl_strap_quirk; |
| int port_mirroring; |
| bool set_clk_output; |
| unsigned int clk_output_sel; |
| bool sgmii_ref_clk_en; |
| }; |
| |
| static int dp83867_config_port_mirroring(struct phy_device *phydev) |
| { |
| struct dp83867_private *dp83867 = |
| (struct dp83867_private *)phydev->priv; |
| u16 val; |
| |
| val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4); |
| |
| if (dp83867->port_mirroring == DP83867_PORT_MIRRORING_EN) |
| val |= DP83867_CFG4_PORT_MIRROR_EN; |
| else |
| val &= ~DP83867_CFG4_PORT_MIRROR_EN; |
| |
| phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, val); |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_DM_ETH) |
| /** |
| * dp83867_data_init - Convenience function for setting PHY specific data |
| * |
| * @phydev: the phy_device struct |
| */ |
| static int dp83867_of_init(struct phy_device *phydev) |
| { |
| struct dp83867_private *dp83867 = phydev->priv; |
| ofnode node; |
| int ret; |
| |
| node = phy_get_ofnode(phydev); |
| if (!ofnode_valid(node)) |
| return -EINVAL; |
| |
| /* Optional configuration */ |
| ret = ofnode_read_u32(node, "ti,clk-output-sel", |
| &dp83867->clk_output_sel); |
| /* If not set, keep default */ |
| if (!ret) { |
| dp83867->set_clk_output = true; |
| /* Valid values are 0 to DP83867_CLK_O_SEL_REF_CLK or |
| * DP83867_CLK_O_SEL_OFF. |
| */ |
| if (dp83867->clk_output_sel > DP83867_CLK_O_SEL_REF_CLK && |
| dp83867->clk_output_sel != DP83867_CLK_O_SEL_OFF) { |
| pr_debug("ti,clk-output-sel value %u out of range\n", |
| dp83867->clk_output_sel); |
| return -EINVAL; |
| } |
| } |
| |
| if (ofnode_read_bool(node, "ti,max-output-impedance")) |
| dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX; |
| else if (ofnode_read_bool(node, "ti,min-output-impedance")) |
| dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN; |
| else |
| dp83867->io_impedance = -EINVAL; |
| |
| if (ofnode_read_bool(node, "ti,dp83867-rxctrl-strap-quirk")) |
| dp83867->rxctrl_strap_quirk = true; |
| |
| /* Existing behavior was to use default pin strapping delay in rgmii |
| * mode, but rgmii should have meant no delay. Warn existing users. |
| */ |
| if (phydev->interface == PHY_INTERFACE_MODE_RGMII) { |
| u16 val = phy_read_mmd(phydev, DP83867_DEVADDR, |
| DP83867_STRAP_STS2); |
| u16 txskew = (val & DP83867_STRAP_STS2_CLK_SKEW_TX_MASK) >> |
| DP83867_STRAP_STS2_CLK_SKEW_TX_SHIFT; |
| u16 rxskew = (val & DP83867_STRAP_STS2_CLK_SKEW_RX_MASK) >> |
| DP83867_STRAP_STS2_CLK_SKEW_RX_SHIFT; |
| |
| if (txskew != DP83867_STRAP_STS2_CLK_SKEW_NONE || |
| rxskew != DP83867_STRAP_STS2_CLK_SKEW_NONE) |
| pr_warn("PHY has delays via pin strapping, but phy-mode = 'rgmii'\n" |
| "Should be 'rgmii-id' to use internal delays\n"); |
| } |
| |
| /* RX delay *must* be specified if internal delay of RX is used. */ |
| if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || |
| phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) { |
| ret = ofnode_read_u32(node, "ti,rx-internal-delay", |
| &dp83867->rx_id_delay); |
| if (ret) { |
| pr_debug("ti,rx-internal-delay must be specified\n"); |
| return ret; |
| } |
| if (dp83867->rx_id_delay > DP83867_RGMII_RX_CLK_DELAY_MAX) { |
| pr_debug("ti,rx-internal-delay value of %u out of range\n", |
| dp83867->rx_id_delay); |
| return -EINVAL; |
| } |
| } |
| |
| /* TX delay *must* be specified if internal delay of RX is used. */ |
| if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || |
| phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) { |
| ret = ofnode_read_u32(node, "ti,tx-internal-delay", |
| &dp83867->tx_id_delay); |
| if (ret) { |
| debug("ti,tx-internal-delay must be specified\n"); |
| return ret; |
| } |
| if (dp83867->tx_id_delay > DP83867_RGMII_TX_CLK_DELAY_MAX) { |
| pr_debug("ti,tx-internal-delay value of %u out of range\n", |
| dp83867->tx_id_delay); |
| return -EINVAL; |
| } |
| } |
| |
| dp83867->fifo_depth = ofnode_read_u32_default(node, "ti,fifo-depth", |
| DEFAULT_FIFO_DEPTH); |
| if (ofnode_read_bool(node, "enet-phy-lane-swap")) |
| dp83867->port_mirroring = DP83867_PORT_MIRRORING_EN; |
| |
| if (ofnode_read_bool(node, "enet-phy-lane-no-swap")) |
| dp83867->port_mirroring = DP83867_PORT_MIRRORING_DIS; |
| |
| if (ofnode_read_bool(node, "ti,sgmii-ref-clock-output-enable")) |
| dp83867->sgmii_ref_clk_en = true; |
| |
| return 0; |
| } |
| #else |
| static int dp83867_of_init(struct phy_device *phydev) |
| { |
| struct dp83867_private *dp83867 = phydev->priv; |
| |
| dp83867->rx_id_delay = DP83867_RGMIIDCTL_2_25_NS; |
| dp83867->tx_id_delay = DP83867_RGMIIDCTL_2_75_NS; |
| dp83867->fifo_depth = DEFAULT_FIFO_DEPTH; |
| dp83867->io_impedance = -EINVAL; |
| |
| return 0; |
| } |
| #endif |
| |
| static int dp83867_config(struct phy_device *phydev) |
| { |
| struct dp83867_private *dp83867; |
| unsigned int val, delay, cfg2; |
| int ret, bs; |
| |
| dp83867 = (struct dp83867_private *)phydev->priv; |
| |
| ret = dp83867_of_init(phydev); |
| if (ret) |
| return ret; |
| |
| /* Restart the PHY. */ |
| val = phy_read(phydev, MDIO_DEVAD_NONE, DP83867_CTRL); |
| phy_write(phydev, MDIO_DEVAD_NONE, DP83867_CTRL, |
| val | DP83867_SW_RESTART); |
| |
| /* Mode 1 or 2 workaround */ |
| if (dp83867->rxctrl_strap_quirk) { |
| val = phy_read_mmd(phydev, DP83867_DEVADDR, |
| DP83867_CFG4); |
| val &= ~BIT(7); |
| phy_write_mmd(phydev, DP83867_DEVADDR, |
| DP83867_CFG4, val); |
| } |
| |
| if (phy_interface_is_rgmii(phydev)) { |
| val = phy_read(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL); |
| if (val < 0) |
| goto err_out; |
| val &= ~DP83867_PHYCR_FIFO_DEPTH_MASK; |
| val |= (dp83867->fifo_depth << DP83867_PHYCR_FIFO_DEPTH_SHIFT); |
| |
| /* Do not force link good */ |
| val &= ~DP83867_PHYCR_FORCE_LINK_GOOD; |
| |
| /* The code below checks if "port mirroring" N/A MODE4 has been |
| * enabled during power on bootstrap. |
| * |
| * Such N/A mode enabled by mistake can put PHY IC in some |
| * internal testing mode and disable RGMII transmission. |
| * |
| * In this particular case one needs to check STRAP_STS1 |
| * register's bit 11 (marked as RESERVED). |
| */ |
| |
| bs = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_STRAP_STS1); |
| if (bs & DP83867_STRAP_STS1_RESERVED) |
| val &= ~DP83867_PHYCR_RESERVED_MASK; |
| |
| ret = phy_write(phydev, MDIO_DEVAD_NONE, |
| MII_DP83867_PHYCTRL, val); |
| |
| val = phy_read_mmd(phydev, DP83867_DEVADDR, |
| DP83867_RGMIICTL); |
| |
| val &= ~(DP83867_RGMII_TX_CLK_DELAY_EN | |
| DP83867_RGMII_RX_CLK_DELAY_EN); |
| if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) |
| val |= (DP83867_RGMII_TX_CLK_DELAY_EN | |
| DP83867_RGMII_RX_CLK_DELAY_EN); |
| |
| if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) |
| val |= DP83867_RGMII_TX_CLK_DELAY_EN; |
| |
| if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) |
| val |= DP83867_RGMII_RX_CLK_DELAY_EN; |
| |
| phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIICTL, val); |
| |
| delay = (dp83867->rx_id_delay | |
| (dp83867->tx_id_delay << |
| DP83867_RGMII_TX_CLK_DELAY_SHIFT)); |
| |
| phy_write_mmd(phydev, DP83867_DEVADDR, |
| DP83867_RGMIIDCTL, delay); |
| } |
| |
| if (phy_interface_is_sgmii(phydev)) { |
| if (dp83867->sgmii_ref_clk_en) |
| phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_SGMIICTL, |
| DP83867_SGMII_TYPE); |
| |
| phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, |
| (BMCR_ANENABLE | BMCR_FULLDPLX | BMCR_SPEED1000)); |
| |
| cfg2 = phy_read(phydev, phydev->addr, MII_DP83867_CFG2); |
| cfg2 &= MII_DP83867_CFG2_MASK; |
| cfg2 |= (MII_DP83867_CFG2_SPEEDOPT_10EN | |
| MII_DP83867_CFG2_SGMII_AUTONEGEN | |
| MII_DP83867_CFG2_SPEEDOPT_ENH | |
| MII_DP83867_CFG2_SPEEDOPT_CNT | |
| MII_DP83867_CFG2_SPEEDOPT_INTLOW); |
| phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_CFG2, cfg2); |
| |
| phy_write_mmd(phydev, DP83867_DEVADDR, |
| DP83867_RGMIICTL, 0x0); |
| |
| phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL, |
| DP83867_PHYCTRL_SGMIIEN | |
| (DP83867_MDI_CROSSOVER_MDIX << |
| DP83867_MDI_CROSSOVER) | |
| (dp83867->fifo_depth << DP83867_PHYCTRL_RXFIFO_SHIFT) | |
| (dp83867->fifo_depth << DP83867_PHYCTRL_TXFIFO_SHIFT)); |
| phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_BISCR, 0x0); |
| } |
| |
| if (dp83867->io_impedance >= 0) { |
| val = phy_read_mmd(phydev, |
| DP83867_DEVADDR, |
| DP83867_IO_MUX_CFG); |
| val &= ~DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL; |
| val |= dp83867->io_impedance & |
| DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL; |
| phy_write_mmd(phydev, DP83867_DEVADDR, |
| DP83867_IO_MUX_CFG, val); |
| } |
| |
| if (dp83867->port_mirroring != DP83867_PORT_MIRRORING_KEEP) |
| dp83867_config_port_mirroring(phydev); |
| |
| /* Clock output selection if muxing property is set */ |
| if (dp83867->set_clk_output) { |
| val = phy_read_mmd(phydev, DP83867_DEVADDR, |
| DP83867_IO_MUX_CFG); |
| |
| if (dp83867->clk_output_sel == DP83867_CLK_O_SEL_OFF) { |
| val |= DP83867_IO_MUX_CFG_CLK_O_DISABLE; |
| } else { |
| val &= ~(DP83867_IO_MUX_CFG_CLK_O_SEL_MASK | |
| DP83867_IO_MUX_CFG_CLK_O_DISABLE); |
| val |= dp83867->clk_output_sel << |
| DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT; |
| } |
| phy_write_mmd(phydev, DP83867_DEVADDR, |
| DP83867_IO_MUX_CFG, val); |
| } |
| |
| genphy_config_aneg(phydev); |
| return 0; |
| |
| err_out: |
| return ret; |
| } |
| |
| static int dp83867_probe(struct phy_device *phydev) |
| { |
| struct dp83867_private *dp83867; |
| |
| dp83867 = kzalloc(sizeof(*dp83867), GFP_KERNEL); |
| if (!dp83867) |
| return -ENOMEM; |
| |
| phydev->priv = dp83867; |
| return 0; |
| } |
| |
| static struct phy_driver DP83867_driver = { |
| .name = "TI DP83867", |
| .uid = 0x2000a231, |
| .mask = 0xfffffff0, |
| .features = PHY_GBIT_FEATURES, |
| .probe = dp83867_probe, |
| .config = &dp83867_config, |
| .startup = &genphy_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| int phy_ti_init(void) |
| { |
| phy_register(&DP83867_driver); |
| return 0; |
| } |