| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com> |
| * Andreas Heppel <aheppel@sysgo.de> |
| * |
| * (C) Copyright 2002, 2003 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| */ |
| |
| /* |
| * Old PCI routines |
| * |
| * Do not change this file. Instead, convert your board to use CONFIG_DM_PCI |
| * and change pci-uclass.c. |
| */ |
| |
| #include <common.h> |
| #include <init.h> |
| #include <log.h> |
| |
| #include <command.h> |
| #include <env.h> |
| #include <errno.h> |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| #include <pci.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define PCI_HOSE_OP(rw, size, type) \ |
| int pci_hose_##rw##_config_##size(struct pci_controller *hose, \ |
| pci_dev_t dev, \ |
| int offset, type value) \ |
| { \ |
| return hose->rw##_##size(hose, dev, offset, value); \ |
| } |
| |
| PCI_HOSE_OP(read, byte, u8 *) |
| PCI_HOSE_OP(read, word, u16 *) |
| PCI_HOSE_OP(read, dword, u32 *) |
| PCI_HOSE_OP(write, byte, u8) |
| PCI_HOSE_OP(write, word, u16) |
| PCI_HOSE_OP(write, dword, u32) |
| |
| #define PCI_OP(rw, size, type, error_code) \ |
| int pci_##rw##_config_##size(pci_dev_t dev, int offset, type value) \ |
| { \ |
| struct pci_controller *hose = pci_bus_to_hose(PCI_BUS(dev)); \ |
| \ |
| if (!hose) \ |
| { \ |
| error_code; \ |
| return -1; \ |
| } \ |
| \ |
| return pci_hose_##rw##_config_##size(hose, dev, offset, value); \ |
| } |
| |
| PCI_OP(read, byte, u8 *, *value = 0xff) |
| PCI_OP(read, word, u16 *, *value = 0xffff) |
| PCI_OP(read, dword, u32 *, *value = 0xffffffff) |
| PCI_OP(write, byte, u8, ) |
| PCI_OP(write, word, u16, ) |
| PCI_OP(write, dword, u32, ) |
| |
| #define PCI_READ_VIA_DWORD_OP(size, type, off_mask) \ |
| int pci_hose_read_config_##size##_via_dword(struct pci_controller *hose,\ |
| pci_dev_t dev, \ |
| int offset, type val) \ |
| { \ |
| u32 val32; \ |
| \ |
| if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0) { \ |
| *val = -1; \ |
| return -1; \ |
| } \ |
| \ |
| *val = (val32 >> ((offset & (int)off_mask) * 8)); \ |
| \ |
| return 0; \ |
| } |
| |
| #define PCI_WRITE_VIA_DWORD_OP(size, type, off_mask, val_mask) \ |
| int pci_hose_write_config_##size##_via_dword(struct pci_controller *hose,\ |
| pci_dev_t dev, \ |
| int offset, type val) \ |
| { \ |
| u32 val32, mask, ldata, shift; \ |
| \ |
| if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0)\ |
| return -1; \ |
| \ |
| shift = ((offset & (int)off_mask) * 8); \ |
| ldata = (((unsigned long)val) & val_mask) << shift; \ |
| mask = val_mask << shift; \ |
| val32 = (val32 & ~mask) | ldata; \ |
| \ |
| if (pci_hose_write_config_dword(hose, dev, offset & 0xfc, val32) < 0)\ |
| return -1; \ |
| \ |
| return 0; \ |
| } |
| |
| PCI_READ_VIA_DWORD_OP(byte, u8 *, 0x03) |
| PCI_READ_VIA_DWORD_OP(word, u16 *, 0x02) |
| PCI_WRITE_VIA_DWORD_OP(byte, u8, 0x03, 0x000000ff) |
| PCI_WRITE_VIA_DWORD_OP(word, u16, 0x02, 0x0000ffff) |
| |
| /* |
| * |
| */ |
| |
| static struct pci_controller* hose_head; |
| |
| struct pci_controller *pci_get_hose_head(void) |
| { |
| if (gd->hose) |
| return gd->hose; |
| |
| return hose_head; |
| } |
| |
| void pci_register_hose(struct pci_controller* hose) |
| { |
| struct pci_controller **phose = &hose_head; |
| |
| while(*phose) |
| phose = &(*phose)->next; |
| |
| hose->next = NULL; |
| |
| *phose = hose; |
| } |
| |
| struct pci_controller *pci_bus_to_hose(int bus) |
| { |
| struct pci_controller *hose; |
| |
| for (hose = pci_get_hose_head(); hose; hose = hose->next) { |
| if (bus >= hose->first_busno && bus <= hose->last_busno) |
| return hose; |
| } |
| |
| printf("pci_bus_to_hose() failed\n"); |
| return NULL; |
| } |
| |
| struct pci_controller *find_hose_by_cfg_addr(void *cfg_addr) |
| { |
| struct pci_controller *hose; |
| |
| for (hose = pci_get_hose_head(); hose; hose = hose->next) { |
| if (hose->cfg_addr == cfg_addr) |
| return hose; |
| } |
| |
| return NULL; |
| } |
| |
| int pci_last_busno(void) |
| { |
| struct pci_controller *hose = pci_get_hose_head(); |
| |
| if (!hose) |
| return -1; |
| |
| while (hose->next) |
| hose = hose->next; |
| |
| return hose->last_busno; |
| } |
| |
| pci_dev_t pci_find_devices(struct pci_device_id *ids, int index) |
| { |
| struct pci_controller * hose; |
| pci_dev_t bdf; |
| int bus; |
| |
| for (hose = pci_get_hose_head(); hose; hose = hose->next) { |
| for (bus = hose->first_busno; bus <= hose->last_busno; bus++) { |
| bdf = pci_hose_find_devices(hose, bus, ids, &index); |
| if (bdf != -1) |
| return bdf; |
| } |
| } |
| |
| return -1; |
| } |
| |
| static int pci_hose_config_device(struct pci_controller *hose, pci_dev_t dev, |
| ulong io, pci_addr_t mem, ulong command) |
| { |
| u32 bar_response; |
| unsigned int old_command; |
| pci_addr_t bar_value; |
| pci_size_t bar_size; |
| unsigned char pin; |
| int bar, found_mem64; |
| |
| debug("PCI Config: I/O=0x%lx, Memory=0x%llx, Command=0x%lx\n", io, |
| (u64)mem, command); |
| |
| pci_hose_write_config_dword(hose, dev, PCI_COMMAND, 0); |
| |
| for (bar = PCI_BASE_ADDRESS_0; bar <= PCI_BASE_ADDRESS_5; bar += 4) { |
| pci_hose_write_config_dword(hose, dev, bar, 0xffffffff); |
| pci_hose_read_config_dword(hose, dev, bar, &bar_response); |
| |
| if (!bar_response) |
| continue; |
| |
| found_mem64 = 0; |
| |
| /* Check the BAR type and set our address mask */ |
| if (bar_response & PCI_BASE_ADDRESS_SPACE) { |
| bar_size = ~(bar_response & PCI_BASE_ADDRESS_IO_MASK) + 1; |
| /* round up region base address to a multiple of size */ |
| io = ((io - 1) | (bar_size - 1)) + 1; |
| bar_value = io; |
| /* compute new region base address */ |
| io = io + bar_size; |
| } else { |
| if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == |
| PCI_BASE_ADDRESS_MEM_TYPE_64) { |
| u32 bar_response_upper; |
| u64 bar64; |
| pci_hose_write_config_dword(hose, dev, bar + 4, |
| 0xffffffff); |
| pci_hose_read_config_dword(hose, dev, bar + 4, |
| &bar_response_upper); |
| |
| bar64 = ((u64)bar_response_upper << 32) | bar_response; |
| |
| bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK) + 1; |
| found_mem64 = 1; |
| } else { |
| bar_size = (u32)(~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1); |
| } |
| |
| /* round up region base address to multiple of size */ |
| mem = ((mem - 1) | (bar_size - 1)) + 1; |
| bar_value = mem; |
| /* compute new region base address */ |
| mem = mem + bar_size; |
| } |
| |
| /* Write it out and update our limit */ |
| pci_hose_write_config_dword (hose, dev, bar, (u32)bar_value); |
| |
| if (found_mem64) { |
| bar += 4; |
| #ifdef CONFIG_SYS_PCI_64BIT |
| pci_hose_write_config_dword(hose, dev, bar, |
| (u32)(bar_value >> 32)); |
| #else |
| pci_hose_write_config_dword(hose, dev, bar, 0x00000000); |
| #endif |
| } |
| } |
| |
| /* Configure Cache Line Size Register */ |
| pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); |
| |
| /* Configure Latency Timer */ |
| pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); |
| |
| /* Disable interrupt line, if device says it wants to use interrupts */ |
| pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &pin); |
| if (pin != 0) { |
| pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, |
| PCI_INTERRUPT_LINE_DISABLE); |
| } |
| |
| pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &old_command); |
| pci_hose_write_config_dword(hose, dev, PCI_COMMAND, |
| (old_command & 0xffff0000) | command); |
| |
| return 0; |
| } |
| |
| /* |
| * |
| */ |
| |
| struct pci_config_table *pci_find_config(struct pci_controller *hose, |
| unsigned short class, |
| unsigned int vendor, |
| unsigned int device, |
| unsigned int bus, |
| unsigned int dev, |
| unsigned int func) |
| { |
| struct pci_config_table *table; |
| |
| for (table = hose->config_table; table && table->vendor; table++) { |
| if ((table->vendor == PCI_ANY_ID || table->vendor == vendor) && |
| (table->device == PCI_ANY_ID || table->device == device) && |
| (table->class == PCI_ANY_ID || table->class == class) && |
| (table->bus == PCI_ANY_ID || table->bus == bus) && |
| (table->dev == PCI_ANY_ID || table->dev == dev) && |
| (table->func == PCI_ANY_ID || table->func == func)) { |
| return table; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| void pci_cfgfunc_config_device(struct pci_controller *hose, |
| pci_dev_t dev, |
| struct pci_config_table *entry) |
| { |
| pci_hose_config_device(hose, dev, entry->priv[0], entry->priv[1], |
| entry->priv[2]); |
| } |
| |
| void pci_cfgfunc_do_nothing(struct pci_controller *hose, |
| pci_dev_t dev, struct pci_config_table *entry) |
| { |
| } |
| |
| /* |
| * HJF: Changed this to return int. I think this is required |
| * to get the correct result when scanning bridges |
| */ |
| extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev); |
| |
| #ifdef CONFIG_PCI_SCAN_SHOW |
| __weak int pci_print_dev(struct pci_controller *hose, pci_dev_t dev) |
| { |
| if (dev == PCI_BDF(hose->first_busno, 0, 0)) |
| return 0; |
| |
| return 1; |
| } |
| #endif /* CONFIG_PCI_SCAN_SHOW */ |
| |
| int pci_hose_scan_bus(struct pci_controller *hose, int bus) |
| { |
| unsigned int sub_bus, found_multi = 0; |
| unsigned short vendor, device, class; |
| unsigned char header_type; |
| #ifndef CONFIG_PCI_PNP |
| struct pci_config_table *cfg; |
| #endif |
| pci_dev_t dev; |
| #ifdef CONFIG_PCI_SCAN_SHOW |
| static int indent = 0; |
| #endif |
| |
| sub_bus = bus; |
| |
| for (dev = PCI_BDF(bus,0,0); |
| dev < PCI_BDF(bus, PCI_MAX_PCI_DEVICES - 1, |
| PCI_MAX_PCI_FUNCTIONS - 1); |
| dev += PCI_BDF(0, 0, 1)) { |
| |
| if (pci_skip_dev(hose, dev)) |
| continue; |
| |
| if (PCI_FUNC(dev) && !found_multi) |
| continue; |
| |
| pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type); |
| |
| pci_hose_read_config_word(hose, dev, PCI_VENDOR_ID, &vendor); |
| |
| if (vendor == 0xffff || vendor == 0x0000) |
| continue; |
| |
| if (!PCI_FUNC(dev)) |
| found_multi = header_type & 0x80; |
| |
| debug("PCI Scan: Found Bus %d, Device %d, Function %d\n", |
| PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev)); |
| |
| pci_hose_read_config_word(hose, dev, PCI_DEVICE_ID, &device); |
| pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class); |
| |
| #ifdef CONFIG_PCI_FIXUP_DEV |
| board_pci_fixup_dev(hose, dev, vendor, device, class); |
| #endif |
| |
| #ifdef CONFIG_PCI_SCAN_SHOW |
| indent++; |
| |
| /* Print leading space, including bus indentation */ |
| printf("%*c", indent + 1, ' '); |
| |
| if (pci_print_dev(hose, dev)) { |
| printf("%02x:%02x.%-*x - %04x:%04x - %s\n", |
| PCI_BUS(dev), PCI_DEV(dev), 6 - indent, PCI_FUNC(dev), |
| vendor, device, pci_class_str(class >> 8)); |
| } |
| #endif |
| |
| #ifdef CONFIG_PCI_PNP |
| sub_bus = max((unsigned int)pciauto_config_device(hose, dev), |
| sub_bus); |
| #else |
| cfg = pci_find_config(hose, class, vendor, device, |
| PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev)); |
| if (cfg) { |
| cfg->config_device(hose, dev, cfg); |
| sub_bus = max(sub_bus, |
| (unsigned int)hose->current_busno); |
| } |
| #endif |
| |
| #ifdef CONFIG_PCI_SCAN_SHOW |
| indent--; |
| #endif |
| |
| if (hose->fixup_irq) |
| hose->fixup_irq(hose, dev); |
| } |
| |
| return sub_bus; |
| } |
| |
| int pci_hose_scan(struct pci_controller *hose) |
| { |
| #if defined(CONFIG_PCI_BOOTDELAY) |
| char *s; |
| int i; |
| |
| if (!gd->pcidelay_done) { |
| /* wait "pcidelay" ms (if defined)... */ |
| s = env_get("pcidelay"); |
| if (s) { |
| int val = simple_strtoul(s, NULL, 10); |
| for (i = 0; i < val; i++) |
| udelay(1000); |
| } |
| gd->pcidelay_done = 1; |
| } |
| #endif /* CONFIG_PCI_BOOTDELAY */ |
| |
| #ifdef CONFIG_PCI_SCAN_SHOW |
| puts("PCI:\n"); |
| #endif |
| |
| /* |
| * Start scan at current_busno. |
| * PCIe will start scan at first_busno+1. |
| */ |
| /* For legacy support, ensure current >= first */ |
| if (hose->first_busno > hose->current_busno) |
| hose->current_busno = hose->first_busno; |
| #ifdef CONFIG_PCI_PNP |
| pciauto_config_init(hose); |
| #endif |
| return pci_hose_scan_bus(hose, hose->current_busno); |
| } |
| |
| void pci_init(void) |
| { |
| hose_head = NULL; |
| |
| /* allow env to disable pci init/enum */ |
| if (env_get("pcidisable") != NULL) |
| return; |
| |
| /* now call board specific pci_init()... */ |
| pci_init_board(); |
| } |
| |
| /* Returns the address of the requested capability structure within the |
| * device's PCI configuration space or 0 in case the device does not |
| * support it. |
| * */ |
| int pci_hose_find_capability(struct pci_controller *hose, pci_dev_t dev, |
| int cap) |
| { |
| int pos; |
| u8 hdr_type; |
| |
| pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &hdr_type); |
| |
| pos = pci_hose_find_cap_start(hose, dev, hdr_type & 0x7F); |
| |
| if (pos) |
| pos = pci_find_cap(hose, dev, pos, cap); |
| |
| return pos; |
| } |
| |
| /* Find the header pointer to the Capabilities*/ |
| int pci_hose_find_cap_start(struct pci_controller *hose, pci_dev_t dev, |
| u8 hdr_type) |
| { |
| u16 status; |
| |
| pci_hose_read_config_word(hose, dev, PCI_STATUS, &status); |
| |
| if (!(status & PCI_STATUS_CAP_LIST)) |
| return 0; |
| |
| switch (hdr_type) { |
| case PCI_HEADER_TYPE_NORMAL: |
| case PCI_HEADER_TYPE_BRIDGE: |
| return PCI_CAPABILITY_LIST; |
| case PCI_HEADER_TYPE_CARDBUS: |
| return PCI_CB_CAPABILITY_LIST; |
| default: |
| return 0; |
| } |
| } |
| |
| int pci_find_cap(struct pci_controller *hose, pci_dev_t dev, int pos, int cap) |
| { |
| int ttl = PCI_FIND_CAP_TTL; |
| u8 id; |
| u8 next_pos; |
| |
| while (ttl--) { |
| pci_hose_read_config_byte(hose, dev, pos, &next_pos); |
| if (next_pos < CAP_START_POS) |
| break; |
| next_pos &= ~3; |
| pos = (int) next_pos; |
| pci_hose_read_config_byte(hose, dev, |
| pos + PCI_CAP_LIST_ID, &id); |
| if (id == 0xff) |
| break; |
| if (id == cap) |
| return pos; |
| pos += PCI_CAP_LIST_NEXT; |
| } |
| return 0; |
| } |
| |
| /** |
| * pci_find_next_ext_capability - Find an extended capability |
| * |
| * Returns the address of the next matching extended capability structure |
| * within the device's PCI configuration space or 0 if the device does |
| * not support it. Some capabilities can occur several times, e.g., the |
| * vendor-specific capability, and this provides a way to find them all. |
| */ |
| int pci_find_next_ext_capability(struct pci_controller *hose, pci_dev_t dev, |
| int start, int cap) |
| { |
| u32 header; |
| int ttl, pos = PCI_CFG_SPACE_SIZE; |
| |
| /* minimum 8 bytes per capability */ |
| ttl = (PCI_CFG_SPACE_EXP_SIZE - PCI_CFG_SPACE_SIZE) / 8; |
| |
| if (start) |
| pos = start; |
| |
| pci_hose_read_config_dword(hose, dev, pos, &header); |
| if (header == 0xffffffff || header == 0) |
| return 0; |
| |
| while (ttl-- > 0) { |
| if (PCI_EXT_CAP_ID(header) == cap && pos != start) |
| return pos; |
| |
| pos = PCI_EXT_CAP_NEXT(header); |
| if (pos < PCI_CFG_SPACE_SIZE) |
| break; |
| |
| pci_hose_read_config_dword(hose, dev, pos, &header); |
| if (header == 0xffffffff || header == 0) |
| break; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * pci_hose_find_ext_capability - Find an extended capability |
| * |
| * Returns the address of the requested extended capability structure |
| * within the device's PCI configuration space or 0 if the device does |
| * not support it. |
| */ |
| int pci_hose_find_ext_capability(struct pci_controller *hose, pci_dev_t dev, |
| int cap) |
| { |
| return pci_find_next_ext_capability(hose, dev, 0, cap); |
| } |