| // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause |
| /* |
| * (C) Copyright 2016-2017 Rockchip Inc. |
| * |
| * Adapted from coreboot. |
| */ |
| |
| #include <common.h> |
| #include <clk.h> |
| #include <dm.h> |
| #include <dt-structs.h> |
| #include <init.h> |
| #include <log.h> |
| #include <ram.h> |
| #include <regmap.h> |
| #include <syscon.h> |
| #include <asm/io.h> |
| #include <asm/arch-rockchip/clock.h> |
| #include <asm/arch-rockchip/cru.h> |
| #include <asm/arch-rockchip/grf_rk3399.h> |
| #include <asm/arch-rockchip/pmu_rk3399.h> |
| #include <asm/arch-rockchip/hardware.h> |
| #include <asm/arch-rockchip/sdram.h> |
| #include <asm/arch-rockchip/sdram_rk3399.h> |
| #include <linux/err.h> |
| #include <time.h> |
| |
| #define PRESET_SGRF_HOLD(n) ((0x1 << (6 + 16)) | ((n) << 6)) |
| #define PRESET_GPIO0_HOLD(n) ((0x1 << (7 + 16)) | ((n) << 7)) |
| #define PRESET_GPIO1_HOLD(n) ((0x1 << (8 + 16)) | ((n) << 8)) |
| |
| #define PHY_DRV_ODT_HI_Z 0x0 |
| #define PHY_DRV_ODT_240 0x1 |
| #define PHY_DRV_ODT_120 0x8 |
| #define PHY_DRV_ODT_80 0x9 |
| #define PHY_DRV_ODT_60 0xc |
| #define PHY_DRV_ODT_48 0xd |
| #define PHY_DRV_ODT_40 0xe |
| #define PHY_DRV_ODT_34_3 0xf |
| |
| #define PHY_BOOSTP_EN 0x1 |
| #define PHY_BOOSTN_EN 0x1 |
| #define PHY_SLEWP_EN 0x1 |
| #define PHY_SLEWN_EN 0x1 |
| #define PHY_RX_CM_INPUT 0x1 |
| #define CS0_MR22_VAL 0 |
| #define CS1_MR22_VAL 3 |
| |
| /* LPDDR3 DRAM DS */ |
| #define LPDDR3_DS_34 0x1 |
| #define LPDDR3_DS_40 0x2 |
| #define LPDDR3_DS_48 0x3 |
| |
| #define CRU_SFTRST_DDR_CTRL(ch, n) ((0x1 << (8 + 16 + (ch) * 4)) | \ |
| ((n) << (8 + (ch) * 4))) |
| #define CRU_SFTRST_DDR_PHY(ch, n) ((0x1 << (9 + 16 + (ch) * 4)) | \ |
| ((n) << (9 + (ch) * 4))) |
| struct chan_info { |
| struct rk3399_ddr_pctl_regs *pctl; |
| struct rk3399_ddr_pi_regs *pi; |
| struct rk3399_ddr_publ_regs *publ; |
| struct msch_regs *msch; |
| }; |
| |
| struct dram_info { |
| #if defined(CONFIG_TPL_BUILD) || \ |
| (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) |
| u32 pwrup_srefresh_exit[2]; |
| struct chan_info chan[2]; |
| struct clk ddr_clk; |
| struct rockchip_cru *cru; |
| struct rk3399_grf_regs *grf; |
| struct rk3399_pmu_regs *pmu; |
| struct rk3399_pmucru *pmucru; |
| struct rk3399_pmusgrf_regs *pmusgrf; |
| struct rk3399_ddr_cic_regs *cic; |
| const struct sdram_rk3399_ops *ops; |
| #endif |
| struct ram_info info; |
| struct rk3399_pmugrf_regs *pmugrf; |
| }; |
| |
| struct sdram_rk3399_ops { |
| int (*data_training_first)(struct dram_info *dram, u32 channel, u8 rank, |
| struct rk3399_sdram_params *sdram); |
| int (*set_rate_index)(struct dram_info *dram, |
| struct rk3399_sdram_params *params); |
| void (*modify_param)(const struct chan_info *chan, |
| struct rk3399_sdram_params *params); |
| struct rk3399_sdram_params * |
| (*get_phy_index_params)(u32 phy_fn, |
| struct rk3399_sdram_params *params); |
| }; |
| |
| #if defined(CONFIG_TPL_BUILD) || \ |
| (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) |
| |
| struct rockchip_dmc_plat { |
| #if CONFIG_IS_ENABLED(OF_PLATDATA) |
| struct dtd_rockchip_rk3399_dmc dtplat; |
| #else |
| struct rk3399_sdram_params sdram_params; |
| #endif |
| struct regmap *map; |
| }; |
| |
| struct io_setting { |
| u32 mhz; |
| u32 mr5; |
| /* dram side */ |
| u32 dq_odt; |
| u32 ca_odt; |
| u32 pdds; |
| u32 dq_vref; |
| u32 ca_vref; |
| /* phy side */ |
| u32 rd_odt; |
| u32 wr_dq_drv; |
| u32 wr_ca_drv; |
| u32 wr_ckcs_drv; |
| u32 rd_odt_en; |
| u32 rd_vref; |
| } lpddr4_io_setting[] = { |
| { |
| 50 * MHz, |
| 0, |
| /* dram side */ |
| 0, /* dq_odt; */ |
| 0, /* ca_odt; */ |
| 6, /* pdds; */ |
| 0x72, /* dq_vref; */ |
| 0x72, /* ca_vref; */ |
| /* phy side */ |
| PHY_DRV_ODT_HI_Z, /* rd_odt; */ |
| PHY_DRV_ODT_40, /* wr_dq_drv; */ |
| PHY_DRV_ODT_40, /* wr_ca_drv; */ |
| PHY_DRV_ODT_40, /* wr_ckcs_drv; */ |
| 0, /* rd_odt_en;*/ |
| 41, /* rd_vref; (unit %, range 3.3% - 48.7%) */ |
| }, |
| { |
| 600 * MHz, |
| 0, |
| /* dram side */ |
| 1, /* dq_odt; */ |
| 0, /* ca_odt; */ |
| 6, /* pdds; */ |
| 0x72, /* dq_vref; */ |
| 0x72, /* ca_vref; */ |
| /* phy side */ |
| PHY_DRV_ODT_HI_Z, /* rd_odt; */ |
| PHY_DRV_ODT_48, /* wr_dq_drv; */ |
| PHY_DRV_ODT_40, /* wr_ca_drv; */ |
| PHY_DRV_ODT_40, /* wr_ckcs_drv; */ |
| 0, /* rd_odt_en; */ |
| 32, /* rd_vref; (unit %, range 3.3% - 48.7%) */ |
| }, |
| { |
| 933 * MHz, |
| 0, |
| /* dram side */ |
| 1, /* dq_odt; */ |
| 0, /* ca_odt; */ |
| 3, /* pdds; */ |
| 0x72, /* dq_vref; */ |
| 0x72, /* ca_vref; */ |
| /* phy side */ |
| PHY_DRV_ODT_80, /* rd_odt; */ |
| PHY_DRV_ODT_40, /* wr_dq_drv; */ |
| PHY_DRV_ODT_40, /* wr_ca_drv; */ |
| PHY_DRV_ODT_40, /* wr_ckcs_drv; */ |
| 1, /* rd_odt_en; */ |
| 20, /* rd_vref; (unit %, range 3.3% - 48.7%) */ |
| }, |
| { |
| 1066 * MHz, |
| 0, |
| /* dram side */ |
| 6, /* dq_odt; */ |
| 0, /* ca_odt; */ |
| 3, /* pdds; */ |
| 0x10, /* dq_vref; */ |
| 0x72, /* ca_vref; */ |
| /* phy side */ |
| PHY_DRV_ODT_80, /* rd_odt; */ |
| PHY_DRV_ODT_60, /* wr_dq_drv; */ |
| PHY_DRV_ODT_40, /* wr_ca_drv; */ |
| PHY_DRV_ODT_40, /* wr_ckcs_drv; */ |
| 1, /* rd_odt_en; */ |
| 20, /* rd_vref; (unit %, range 3.3% - 48.7%) */ |
| }, |
| }; |
| |
| static struct io_setting * |
| lpddr4_get_io_settings(const struct rk3399_sdram_params *params, u32 mr5) |
| { |
| struct io_setting *io = NULL; |
| u32 n; |
| |
| for (n = 0; n < ARRAY_SIZE(lpddr4_io_setting); n++) { |
| io = &lpddr4_io_setting[n]; |
| |
| if (io->mr5 != 0) { |
| if (io->mhz >= params->base.ddr_freq && |
| io->mr5 == mr5) |
| break; |
| } else { |
| if (io->mhz >= params->base.ddr_freq) |
| break; |
| } |
| } |
| |
| return io; |
| } |
| |
| static void *get_denali_ctl(const struct chan_info *chan, |
| struct rk3399_sdram_params *params, bool reg) |
| { |
| return reg ? &chan->pctl->denali_ctl : ¶ms->pctl_regs.denali_ctl; |
| } |
| |
| static void *get_denali_phy(const struct chan_info *chan, |
| struct rk3399_sdram_params *params, bool reg) |
| { |
| return reg ? &chan->publ->denali_phy : ¶ms->phy_regs.denali_phy; |
| } |
| |
| static void *get_ddrc0_con(struct dram_info *dram, u8 channel) |
| { |
| return (channel == 0) ? &dram->grf->ddrc0_con0 : &dram->grf->ddrc1_con0; |
| } |
| |
| static void rkclk_ddr_reset(struct rockchip_cru *cru, u32 channel, u32 ctl, |
| u32 phy) |
| { |
| channel &= 0x1; |
| ctl &= 0x1; |
| phy &= 0x1; |
| writel(CRU_SFTRST_DDR_CTRL(channel, ctl) | |
| CRU_SFTRST_DDR_PHY(channel, phy), |
| &cru->softrst_con[4]); |
| } |
| |
| static void phy_pctrl_reset(struct rockchip_cru *cru, u32 channel) |
| { |
| rkclk_ddr_reset(cru, channel, 1, 1); |
| udelay(10); |
| |
| rkclk_ddr_reset(cru, channel, 1, 0); |
| udelay(10); |
| |
| rkclk_ddr_reset(cru, channel, 0, 0); |
| udelay(10); |
| } |
| |
| static void phy_dll_bypass_set(struct rk3399_ddr_publ_regs *ddr_publ_regs, |
| u32 freq) |
| { |
| u32 *denali_phy = ddr_publ_regs->denali_phy; |
| |
| /* From IP spec, only freq small than 125 can enter dll bypass mode */ |
| if (freq <= 125) { |
| /* phy_sw_master_mode_X PHY_86/214/342/470 4bits offset_8 */ |
| setbits_le32(&denali_phy[86], (0x3 << 2) << 8); |
| setbits_le32(&denali_phy[214], (0x3 << 2) << 8); |
| setbits_le32(&denali_phy[342], (0x3 << 2) << 8); |
| setbits_le32(&denali_phy[470], (0x3 << 2) << 8); |
| |
| /* phy_adrctl_sw_master_mode PHY_547/675/803 4bits offset_16 */ |
| setbits_le32(&denali_phy[547], (0x3 << 2) << 16); |
| setbits_le32(&denali_phy[675], (0x3 << 2) << 16); |
| setbits_le32(&denali_phy[803], (0x3 << 2) << 16); |
| } else { |
| /* phy_sw_master_mode_X PHY_86/214/342/470 4bits offset_8 */ |
| clrbits_le32(&denali_phy[86], (0x3 << 2) << 8); |
| clrbits_le32(&denali_phy[214], (0x3 << 2) << 8); |
| clrbits_le32(&denali_phy[342], (0x3 << 2) << 8); |
| clrbits_le32(&denali_phy[470], (0x3 << 2) << 8); |
| |
| /* phy_adrctl_sw_master_mode PHY_547/675/803 4bits offset_16 */ |
| clrbits_le32(&denali_phy[547], (0x3 << 2) << 16); |
| clrbits_le32(&denali_phy[675], (0x3 << 2) << 16); |
| clrbits_le32(&denali_phy[803], (0x3 << 2) << 16); |
| } |
| } |
| |
| static void set_memory_map(const struct chan_info *chan, u32 channel, |
| const struct rk3399_sdram_params *params) |
| { |
| const struct rk3399_sdram_channel *sdram_ch = ¶ms->ch[channel]; |
| u32 *denali_ctl = chan->pctl->denali_ctl; |
| u32 *denali_pi = chan->pi->denali_pi; |
| u32 cs_map; |
| u32 reduc; |
| u32 row; |
| |
| /* Get row number from ddrconfig setting */ |
| if (sdram_ch->cap_info.ddrconfig < 2 || |
| sdram_ch->cap_info.ddrconfig == 4) |
| row = 16; |
| else if (sdram_ch->cap_info.ddrconfig == 3 || |
| sdram_ch->cap_info.ddrconfig == 5) |
| row = 14; |
| else |
| row = 15; |
| |
| cs_map = (sdram_ch->cap_info.rank > 1) ? 3 : 1; |
| reduc = (sdram_ch->cap_info.bw == 2) ? 0 : 1; |
| |
| /* Set the dram configuration to ctrl */ |
| clrsetbits_le32(&denali_ctl[191], 0xF, (12 - sdram_ch->cap_info.col)); |
| clrsetbits_le32(&denali_ctl[190], (0x3 << 16) | (0x7 << 24), |
| ((3 - sdram_ch->cap_info.bk) << 16) | |
| ((16 - row) << 24)); |
| |
| clrsetbits_le32(&denali_ctl[196], 0x3 | (1 << 16), |
| cs_map | (reduc << 16)); |
| |
| /* PI_199 PI_COL_DIFF:RW:0:4 */ |
| clrsetbits_le32(&denali_pi[199], 0xF, (12 - sdram_ch->cap_info.col)); |
| |
| /* PI_155 PI_ROW_DIFF:RW:24:3 PI_BANK_DIFF:RW:16:2 */ |
| clrsetbits_le32(&denali_pi[155], (0x3 << 16) | (0x7 << 24), |
| ((3 - sdram_ch->cap_info.bk) << 16) | |
| ((16 - row) << 24)); |
| |
| if (params->base.dramtype == LPDDR4) { |
| if (cs_map == 1) |
| cs_map = 0x5; |
| else if (cs_map == 2) |
| cs_map = 0xa; |
| else |
| cs_map = 0xF; |
| } |
| |
| /* PI_41 PI_CS_MAP:RW:24:4 */ |
| clrsetbits_le32(&denali_pi[41], 0xf << 24, cs_map << 24); |
| if (sdram_ch->cap_info.rank == 1 && params->base.dramtype == DDR3) |
| writel(0x2EC7FFFF, &denali_pi[34]); |
| } |
| |
| static int phy_io_config(u32 *denali_phy, u32 *denali_ctl, |
| const struct rk3399_sdram_params *params, u32 mr5) |
| { |
| u32 vref_mode_dq, vref_value_dq, vref_mode_ac, vref_value_ac; |
| u32 mode_sel; |
| u32 speed; |
| u32 reg_value; |
| u32 ds_value, odt_value; |
| |
| /* vref setting & mode setting */ |
| if (params->base.dramtype == LPDDR4) { |
| struct io_setting *io = lpddr4_get_io_settings(params, mr5); |
| u32 rd_vref = io->rd_vref * 1000; |
| |
| if (rd_vref < 36700) { |
| /* MODE_LV[2:0] = LPDDR4 (Range 2)*/ |
| vref_mode_dq = 0x7; |
| /* MODE[2:0]= LPDDR4 Range 2(0.4*VDDQ) */ |
| mode_sel = 0x5; |
| vref_value_dq = (rd_vref - 3300) / 521; |
| } else { |
| /* MODE_LV[2:0] = LPDDR4 (Range 1)*/ |
| vref_mode_dq = 0x6; |
| /* MODE[2:0]= LPDDR4 Range 1(0.33*VDDQ) */ |
| mode_sel = 0x4; |
| vref_value_dq = (rd_vref - 15300) / 521; |
| } |
| vref_mode_ac = 0x6; |
| /* VDDQ/3/2=16.8% */ |
| vref_value_ac = 0x3; |
| } else if (params->base.dramtype == LPDDR3) { |
| if (params->base.odt == 1) { |
| vref_mode_dq = 0x5; /* LPDDR3 ODT */ |
| ds_value = readl(&denali_ctl[138]) & 0xf; |
| odt_value = (readl(&denali_phy[6]) >> 4) & 0xf; |
| if (ds_value == LPDDR3_DS_48) { |
| switch (odt_value) { |
| case PHY_DRV_ODT_240: |
| vref_value_dq = 0x1B; |
| break; |
| case PHY_DRV_ODT_120: |
| vref_value_dq = 0x26; |
| break; |
| case PHY_DRV_ODT_60: |
| vref_value_dq = 0x36; |
| break; |
| default: |
| debug("Invalid ODT value.\n"); |
| return -EINVAL; |
| } |
| } else if (ds_value == LPDDR3_DS_40) { |
| switch (odt_value) { |
| case PHY_DRV_ODT_240: |
| vref_value_dq = 0x19; |
| break; |
| case PHY_DRV_ODT_120: |
| vref_value_dq = 0x23; |
| break; |
| case PHY_DRV_ODT_60: |
| vref_value_dq = 0x31; |
| break; |
| default: |
| debug("Invalid ODT value.\n"); |
| return -EINVAL; |
| } |
| } else if (ds_value == LPDDR3_DS_34) { |
| switch (odt_value) { |
| case PHY_DRV_ODT_240: |
| vref_value_dq = 0x17; |
| break; |
| case PHY_DRV_ODT_120: |
| vref_value_dq = 0x20; |
| break; |
| case PHY_DRV_ODT_60: |
| vref_value_dq = 0x2e; |
| break; |
| default: |
| debug("Invalid ODT value.\n"); |
| return -EINVAL; |
| } |
| } else { |
| debug("Invalid DRV value.\n"); |
| return -EINVAL; |
| } |
| } else { |
| vref_mode_dq = 0x2; /* LPDDR3 */ |
| vref_value_dq = 0x1f; |
| } |
| vref_mode_ac = 0x2; |
| vref_value_ac = 0x1f; |
| mode_sel = 0x0; |
| } else if (params->base.dramtype == DDR3) { |
| /* DDR3L */ |
| vref_mode_dq = 0x1; |
| vref_value_dq = 0x1f; |
| vref_mode_ac = 0x1; |
| vref_value_ac = 0x1f; |
| mode_sel = 0x1; |
| } else { |
| debug("Unknown DRAM type.\n"); |
| return -EINVAL; |
| } |
| |
| reg_value = (vref_mode_dq << 9) | (0x1 << 8) | vref_value_dq; |
| |
| /* PHY_913 PHY_PAD_VREF_CTRL_DQ_0 12bits offset_8 */ |
| clrsetbits_le32(&denali_phy[913], 0xfff << 8, reg_value << 8); |
| /* PHY_914 PHY_PAD_VREF_CTRL_DQ_1 12bits offset_0 */ |
| clrsetbits_le32(&denali_phy[914], 0xfff, reg_value); |
| /* PHY_914 PHY_PAD_VREF_CTRL_DQ_2 12bits offset_16 */ |
| clrsetbits_le32(&denali_phy[914], 0xfff << 16, reg_value << 16); |
| /* PHY_915 PHY_PAD_VREF_CTRL_DQ_3 12bits offset_0 */ |
| clrsetbits_le32(&denali_phy[915], 0xfff, reg_value); |
| |
| reg_value = (vref_mode_ac << 9) | (0x1 << 8) | vref_value_ac; |
| |
| /* PHY_915 PHY_PAD_VREF_CTRL_AC 12bits offset_16 */ |
| clrsetbits_le32(&denali_phy[915], 0xfff << 16, reg_value << 16); |
| |
| /* PHY_924 PHY_PAD_FDBK_DRIVE */ |
| clrsetbits_le32(&denali_phy[924], 0x7 << 15, mode_sel << 15); |
| /* PHY_926 PHY_PAD_DATA_DRIVE */ |
| clrsetbits_le32(&denali_phy[926], 0x7 << 6, mode_sel << 6); |
| /* PHY_927 PHY_PAD_DQS_DRIVE */ |
| clrsetbits_le32(&denali_phy[927], 0x7 << 6, mode_sel << 6); |
| /* PHY_928 PHY_PAD_ADDR_DRIVE */ |
| clrsetbits_le32(&denali_phy[928], 0x7 << 14, mode_sel << 14); |
| /* PHY_929 PHY_PAD_CLK_DRIVE */ |
| clrsetbits_le32(&denali_phy[929], 0x7 << 14, mode_sel << 14); |
| /* PHY_935 PHY_PAD_CKE_DRIVE */ |
| clrsetbits_le32(&denali_phy[935], 0x7 << 14, mode_sel << 14); |
| /* PHY_937 PHY_PAD_RST_DRIVE */ |
| clrsetbits_le32(&denali_phy[937], 0x7 << 14, mode_sel << 14); |
| /* PHY_939 PHY_PAD_CS_DRIVE */ |
| clrsetbits_le32(&denali_phy[939], 0x7 << 14, mode_sel << 14); |
| |
| if (params->base.dramtype == LPDDR4) { |
| /* BOOSTP_EN & BOOSTN_EN */ |
| reg_value = ((PHY_BOOSTP_EN << 4) | PHY_BOOSTN_EN); |
| /* PHY_925 PHY_PAD_FDBK_DRIVE2 */ |
| clrsetbits_le32(&denali_phy[925], 0xff << 8, reg_value << 8); |
| /* PHY_926 PHY_PAD_DATA_DRIVE */ |
| clrsetbits_le32(&denali_phy[926], 0xff << 12, reg_value << 12); |
| /* PHY_927 PHY_PAD_DQS_DRIVE */ |
| clrsetbits_le32(&denali_phy[927], 0xff << 14, reg_value << 14); |
| /* PHY_928 PHY_PAD_ADDR_DRIVE */ |
| clrsetbits_le32(&denali_phy[928], 0xff << 20, reg_value << 20); |
| /* PHY_929 PHY_PAD_CLK_DRIVE */ |
| clrsetbits_le32(&denali_phy[929], 0xff << 22, reg_value << 22); |
| /* PHY_935 PHY_PAD_CKE_DRIVE */ |
| clrsetbits_le32(&denali_phy[935], 0xff << 20, reg_value << 20); |
| /* PHY_937 PHY_PAD_RST_DRIVE */ |
| clrsetbits_le32(&denali_phy[937], 0xff << 20, reg_value << 20); |
| /* PHY_939 PHY_PAD_CS_DRIVE */ |
| clrsetbits_le32(&denali_phy[939], 0xff << 20, reg_value << 20); |
| |
| /* SLEWP_EN & SLEWN_EN */ |
| reg_value = ((PHY_SLEWP_EN << 3) | PHY_SLEWN_EN); |
| /* PHY_924 PHY_PAD_FDBK_DRIVE */ |
| clrsetbits_le32(&denali_phy[924], 0x3f << 8, reg_value << 8); |
| /* PHY_926 PHY_PAD_DATA_DRIVE */ |
| clrsetbits_le32(&denali_phy[926], 0x3f, reg_value); |
| /* PHY_927 PHY_PAD_DQS_DRIVE */ |
| clrsetbits_le32(&denali_phy[927], 0x3f, reg_value); |
| /* PHY_928 PHY_PAD_ADDR_DRIVE */ |
| clrsetbits_le32(&denali_phy[928], 0x3f << 8, reg_value << 8); |
| /* PHY_929 PHY_PAD_CLK_DRIVE */ |
| clrsetbits_le32(&denali_phy[929], 0x3f << 8, reg_value << 8); |
| /* PHY_935 PHY_PAD_CKE_DRIVE */ |
| clrsetbits_le32(&denali_phy[935], 0x3f << 8, reg_value << 8); |
| /* PHY_937 PHY_PAD_RST_DRIVE */ |
| clrsetbits_le32(&denali_phy[937], 0x3f << 8, reg_value << 8); |
| /* PHY_939 PHY_PAD_CS_DRIVE */ |
| clrsetbits_le32(&denali_phy[939], 0x3f << 8, reg_value << 8); |
| } |
| |
| /* speed setting */ |
| speed = 0x2; |
| |
| /* PHY_924 PHY_PAD_FDBK_DRIVE */ |
| clrsetbits_le32(&denali_phy[924], 0x3 << 21, speed << 21); |
| /* PHY_926 PHY_PAD_DATA_DRIVE */ |
| clrsetbits_le32(&denali_phy[926], 0x3 << 9, speed << 9); |
| /* PHY_927 PHY_PAD_DQS_DRIVE */ |
| clrsetbits_le32(&denali_phy[927], 0x3 << 9, speed << 9); |
| /* PHY_928 PHY_PAD_ADDR_DRIVE */ |
| clrsetbits_le32(&denali_phy[928], 0x3 << 17, speed << 17); |
| /* PHY_929 PHY_PAD_CLK_DRIVE */ |
| clrsetbits_le32(&denali_phy[929], 0x3 << 17, speed << 17); |
| /* PHY_935 PHY_PAD_CKE_DRIVE */ |
| clrsetbits_le32(&denali_phy[935], 0x3 << 17, speed << 17); |
| /* PHY_937 PHY_PAD_RST_DRIVE */ |
| clrsetbits_le32(&denali_phy[937], 0x3 << 17, speed << 17); |
| /* PHY_939 PHY_PAD_CS_DRIVE */ |
| clrsetbits_le32(&denali_phy[939], 0x3 << 17, speed << 17); |
| |
| if (params->base.dramtype == LPDDR4) { |
| /* RX_CM_INPUT */ |
| reg_value = PHY_RX_CM_INPUT; |
| /* PHY_924 PHY_PAD_FDBK_DRIVE */ |
| clrsetbits_le32(&denali_phy[924], 0x1 << 14, reg_value << 14); |
| /* PHY_926 PHY_PAD_DATA_DRIVE */ |
| clrsetbits_le32(&denali_phy[926], 0x1 << 11, reg_value << 11); |
| /* PHY_927 PHY_PAD_DQS_DRIVE */ |
| clrsetbits_le32(&denali_phy[927], 0x1 << 13, reg_value << 13); |
| /* PHY_928 PHY_PAD_ADDR_DRIVE */ |
| clrsetbits_le32(&denali_phy[928], 0x1 << 19, reg_value << 19); |
| /* PHY_929 PHY_PAD_CLK_DRIVE */ |
| clrsetbits_le32(&denali_phy[929], 0x1 << 21, reg_value << 21); |
| /* PHY_935 PHY_PAD_CKE_DRIVE */ |
| clrsetbits_le32(&denali_phy[935], 0x1 << 19, reg_value << 19); |
| /* PHY_937 PHY_PAD_RST_DRIVE */ |
| clrsetbits_le32(&denali_phy[937], 0x1 << 19, reg_value << 19); |
| /* PHY_939 PHY_PAD_CS_DRIVE */ |
| clrsetbits_le32(&denali_phy[939], 0x1 << 19, reg_value << 19); |
| } |
| |
| return 0; |
| } |
| |
| static void set_ds_odt(const struct chan_info *chan, |
| struct rk3399_sdram_params *params, |
| bool ctl_phy_reg, u32 mr5) |
| { |
| u32 *denali_phy = get_denali_phy(chan, params, ctl_phy_reg); |
| u32 *denali_ctl = get_denali_ctl(chan, params, ctl_phy_reg); |
| u32 tsel_idle_en, tsel_wr_en, tsel_rd_en; |
| u32 tsel_idle_select_p, tsel_rd_select_p; |
| u32 tsel_idle_select_n, tsel_rd_select_n; |
| u32 tsel_wr_select_dq_p, tsel_wr_select_ca_p; |
| u32 tsel_wr_select_dq_n, tsel_wr_select_ca_n; |
| u32 tsel_ckcs_select_p, tsel_ckcs_select_n; |
| struct io_setting *io = NULL; |
| u32 soc_odt = 0; |
| u32 reg_value; |
| |
| if (params->base.dramtype == LPDDR4) { |
| io = lpddr4_get_io_settings(params, mr5); |
| |
| tsel_rd_select_p = PHY_DRV_ODT_HI_Z; |
| tsel_rd_select_n = io->rd_odt; |
| |
| tsel_idle_select_p = PHY_DRV_ODT_HI_Z; |
| tsel_idle_select_n = PHY_DRV_ODT_HI_Z; |
| |
| tsel_wr_select_dq_p = io->wr_dq_drv; |
| tsel_wr_select_dq_n = PHY_DRV_ODT_34_3; |
| |
| tsel_wr_select_ca_p = io->wr_ca_drv; |
| tsel_wr_select_ca_n = PHY_DRV_ODT_34_3; |
| |
| tsel_ckcs_select_p = io->wr_ckcs_drv; |
| tsel_ckcs_select_n = PHY_DRV_ODT_34_3; |
| |
| switch (tsel_rd_select_n) { |
| case PHY_DRV_ODT_240: |
| soc_odt = 1; |
| break; |
| case PHY_DRV_ODT_120: |
| soc_odt = 2; |
| break; |
| case PHY_DRV_ODT_80: |
| soc_odt = 3; |
| break; |
| case PHY_DRV_ODT_60: |
| soc_odt = 4; |
| break; |
| case PHY_DRV_ODT_48: |
| soc_odt = 5; |
| break; |
| case PHY_DRV_ODT_40: |
| soc_odt = 6; |
| break; |
| case PHY_DRV_ODT_34_3: |
| soc_odt = 6; |
| printf("%s: Unable to support LPDDR4 MR22 Soc ODT\n", |
| __func__); |
| break; |
| case PHY_DRV_ODT_HI_Z: |
| default: |
| soc_odt = 0; |
| break; |
| } |
| } else if (params->base.dramtype == LPDDR3) { |
| tsel_rd_select_p = PHY_DRV_ODT_240; |
| tsel_rd_select_n = PHY_DRV_ODT_HI_Z; |
| |
| tsel_idle_select_p = PHY_DRV_ODT_240; |
| tsel_idle_select_n = PHY_DRV_ODT_HI_Z; |
| |
| tsel_wr_select_dq_p = PHY_DRV_ODT_34_3; |
| tsel_wr_select_dq_n = PHY_DRV_ODT_34_3; |
| |
| tsel_wr_select_ca_p = PHY_DRV_ODT_34_3; |
| tsel_wr_select_ca_n = PHY_DRV_ODT_34_3; |
| |
| tsel_ckcs_select_p = PHY_DRV_ODT_34_3; |
| tsel_ckcs_select_n = PHY_DRV_ODT_34_3; |
| } else { |
| tsel_rd_select_p = PHY_DRV_ODT_240; |
| tsel_rd_select_n = PHY_DRV_ODT_240; |
| |
| tsel_idle_select_p = PHY_DRV_ODT_240; |
| tsel_idle_select_n = PHY_DRV_ODT_240; |
| |
| tsel_wr_select_dq_p = PHY_DRV_ODT_34_3; |
| tsel_wr_select_dq_n = PHY_DRV_ODT_34_3; |
| |
| tsel_wr_select_ca_p = PHY_DRV_ODT_34_3; |
| tsel_wr_select_ca_n = PHY_DRV_ODT_34_3; |
| |
| tsel_ckcs_select_p = PHY_DRV_ODT_34_3; |
| tsel_ckcs_select_n = PHY_DRV_ODT_34_3; |
| } |
| |
| if (params->base.odt == 1) { |
| tsel_rd_en = 1; |
| |
| if (params->base.dramtype == LPDDR4) |
| tsel_rd_en = io->rd_odt_en; |
| } else { |
| tsel_rd_en = 0; |
| } |
| |
| tsel_wr_en = 0; |
| tsel_idle_en = 0; |
| |
| /* F0_0 */ |
| clrsetbits_le32(&denali_ctl[145], 0xFF << 16, |
| (soc_odt | (CS0_MR22_VAL << 3)) << 16); |
| /* F2_0, F1_0 */ |
| clrsetbits_le32(&denali_ctl[146], 0xFF00FF, |
| ((soc_odt | (CS0_MR22_VAL << 3)) << 16) | |
| (soc_odt | (CS0_MR22_VAL << 3))); |
| /* F0_1 */ |
| clrsetbits_le32(&denali_ctl[159], 0xFF << 16, |
| (soc_odt | (CS1_MR22_VAL << 3)) << 16); |
| /* F2_1, F1_1 */ |
| clrsetbits_le32(&denali_ctl[160], 0xFF00FF, |
| ((soc_odt | (CS1_MR22_VAL << 3)) << 16) | |
| (soc_odt | (CS1_MR22_VAL << 3))); |
| |
| /* |
| * phy_dq_tsel_select_X 24bits DENALI_PHY_6/134/262/390 offset_0 |
| * sets termination values for read/idle cycles and drive strength |
| * for write cycles for DQ/DM |
| */ |
| reg_value = tsel_rd_select_n | (tsel_rd_select_p << 0x4) | |
| (tsel_wr_select_dq_n << 8) | (tsel_wr_select_dq_p << 12) | |
| (tsel_idle_select_n << 16) | (tsel_idle_select_p << 20); |
| clrsetbits_le32(&denali_phy[6], 0xffffff, reg_value); |
| clrsetbits_le32(&denali_phy[134], 0xffffff, reg_value); |
| clrsetbits_le32(&denali_phy[262], 0xffffff, reg_value); |
| clrsetbits_le32(&denali_phy[390], 0xffffff, reg_value); |
| |
| /* |
| * phy_dqs_tsel_select_X 24bits DENALI_PHY_7/135/263/391 offset_0 |
| * sets termination values for read/idle cycles and drive strength |
| * for write cycles for DQS |
| */ |
| clrsetbits_le32(&denali_phy[7], 0xffffff, reg_value); |
| clrsetbits_le32(&denali_phy[135], 0xffffff, reg_value); |
| clrsetbits_le32(&denali_phy[263], 0xffffff, reg_value); |
| clrsetbits_le32(&denali_phy[391], 0xffffff, reg_value); |
| |
| /* phy_adr_tsel_select_ 8bits DENALI_PHY_544/672/800 offset_0 */ |
| reg_value = tsel_wr_select_ca_n | (tsel_wr_select_ca_p << 0x4); |
| if (params->base.dramtype == LPDDR4) { |
| /* LPDDR4 these register read always return 0, so |
| * can not use clrsetbits_le32(), need to write32 |
| */ |
| writel((0x300 << 8) | reg_value, &denali_phy[544]); |
| writel((0x300 << 8) | reg_value, &denali_phy[672]); |
| writel((0x300 << 8) | reg_value, &denali_phy[800]); |
| } else { |
| clrsetbits_le32(&denali_phy[544], 0xff, reg_value); |
| clrsetbits_le32(&denali_phy[672], 0xff, reg_value); |
| clrsetbits_le32(&denali_phy[800], 0xff, reg_value); |
| } |
| |
| /* phy_pad_addr_drive 8bits DENALI_PHY_928 offset_0 */ |
| clrsetbits_le32(&denali_phy[928], 0xff, reg_value); |
| |
| /* phy_pad_rst_drive 8bits DENALI_PHY_937 offset_0 */ |
| if (!ctl_phy_reg) |
| clrsetbits_le32(&denali_phy[937], 0xff, reg_value); |
| |
| /* phy_pad_cke_drive 8bits DENALI_PHY_935 offset_0 */ |
| clrsetbits_le32(&denali_phy[935], 0xff, reg_value); |
| |
| /* phy_pad_cs_drive 8bits DENALI_PHY_939 offset_0 */ |
| clrsetbits_le32(&denali_phy[939], 0xff, |
| tsel_ckcs_select_n | (tsel_ckcs_select_p << 0x4)); |
| |
| /* phy_pad_clk_drive 8bits DENALI_PHY_929 offset_0 */ |
| clrsetbits_le32(&denali_phy[929], 0xff, |
| tsel_ckcs_select_n | (tsel_ckcs_select_p << 0x4)); |
| |
| /* phy_pad_fdbk_drive 23bit DENALI_PHY_924/925 */ |
| clrsetbits_le32(&denali_phy[924], 0xff, |
| tsel_wr_select_ca_n | (tsel_wr_select_ca_p << 4)); |
| clrsetbits_le32(&denali_phy[925], 0xff, |
| tsel_wr_select_dq_n | (tsel_wr_select_dq_p << 4)); |
| |
| /* phy_dq_tsel_enable_X 3bits DENALI_PHY_5/133/261/389 offset_16 */ |
| reg_value = (tsel_rd_en | (tsel_wr_en << 1) | (tsel_idle_en << 2)) |
| << 16; |
| clrsetbits_le32(&denali_phy[5], 0x7 << 16, reg_value); |
| clrsetbits_le32(&denali_phy[133], 0x7 << 16, reg_value); |
| clrsetbits_le32(&denali_phy[261], 0x7 << 16, reg_value); |
| clrsetbits_le32(&denali_phy[389], 0x7 << 16, reg_value); |
| |
| /* phy_dqs_tsel_enable_X 3bits DENALI_PHY_6/134/262/390 offset_24 */ |
| reg_value = (tsel_rd_en | (tsel_wr_en << 1) | (tsel_idle_en << 2)) |
| << 24; |
| clrsetbits_le32(&denali_phy[6], 0x7 << 24, reg_value); |
| clrsetbits_le32(&denali_phy[134], 0x7 << 24, reg_value); |
| clrsetbits_le32(&denali_phy[262], 0x7 << 24, reg_value); |
| clrsetbits_le32(&denali_phy[390], 0x7 << 24, reg_value); |
| |
| /* phy_adr_tsel_enable_ 1bit DENALI_PHY_518/646/774 offset_8 */ |
| reg_value = tsel_wr_en << 8; |
| clrsetbits_le32(&denali_phy[518], 0x1 << 8, reg_value); |
| clrsetbits_le32(&denali_phy[646], 0x1 << 8, reg_value); |
| clrsetbits_le32(&denali_phy[774], 0x1 << 8, reg_value); |
| |
| /* phy_pad_addr_term tsel 1bit DENALI_PHY_933 offset_17 */ |
| reg_value = tsel_wr_en << 17; |
| clrsetbits_le32(&denali_phy[933], 0x1 << 17, reg_value); |
| /* |
| * pad_rst/cke/cs/clk_term tsel 1bits |
| * DENALI_PHY_938/936/940/934 offset_17 |
| */ |
| clrsetbits_le32(&denali_phy[938], 0x1 << 17, reg_value); |
| clrsetbits_le32(&denali_phy[936], 0x1 << 17, reg_value); |
| clrsetbits_le32(&denali_phy[940], 0x1 << 17, reg_value); |
| clrsetbits_le32(&denali_phy[934], 0x1 << 17, reg_value); |
| |
| /* phy_pad_fdbk_term 1bit DENALI_PHY_930 offset_17 */ |
| clrsetbits_le32(&denali_phy[930], 0x1 << 17, reg_value); |
| |
| phy_io_config(denali_phy, denali_ctl, params, mr5); |
| } |
| |
| static void pctl_start(struct dram_info *dram, |
| struct rk3399_sdram_params *params, |
| u32 channel_mask) |
| { |
| const struct chan_info *chan_0 = &dram->chan[0]; |
| const struct chan_info *chan_1 = &dram->chan[1]; |
| |
| u32 *denali_ctl_0 = chan_0->pctl->denali_ctl; |
| u32 *denali_phy_0 = chan_0->publ->denali_phy; |
| u32 *ddrc0_con_0 = get_ddrc0_con(dram, 0); |
| u32 *denali_ctl_1 = chan_1->pctl->denali_ctl; |
| u32 *denali_phy_1 = chan_1->publ->denali_phy; |
| u32 *ddrc1_con_0 = get_ddrc0_con(dram, 1); |
| u32 count = 0; |
| u32 byte, tmp; |
| |
| /* PHY_DLL_RST_EN */ |
| if (channel_mask & 1) { |
| writel(0x01000000, &ddrc0_con_0); |
| clrsetbits_le32(&denali_phy_0[957], 0x3 << 24, 0x2 << 24); |
| } |
| |
| if (channel_mask & 1) { |
| count = 0; |
| while (!(readl(&denali_ctl_0[203]) & (1 << 3))) { |
| if (count > 1000) { |
| printf("%s: Failed to init pctl channel 0\n", |
| __func__); |
| while (1) |
| ; |
| } |
| udelay(1); |
| count++; |
| } |
| |
| writel(0x01000100, &ddrc0_con_0); |
| for (byte = 0; byte < 4; byte++) { |
| tmp = 0x820; |
| writel((tmp << 16) | tmp, |
| &denali_phy_0[53 + (128 * byte)]); |
| writel((tmp << 16) | tmp, |
| &denali_phy_0[54 + (128 * byte)]); |
| writel((tmp << 16) | tmp, |
| &denali_phy_0[55 + (128 * byte)]); |
| writel((tmp << 16) | tmp, |
| &denali_phy_0[56 + (128 * byte)]); |
| writel((tmp << 16) | tmp, |
| &denali_phy_0[57 + (128 * byte)]); |
| clrsetbits_le32(&denali_phy_0[58 + (128 * byte)], |
| 0xffff, tmp); |
| } |
| clrsetbits_le32(&denali_ctl_0[68], PWRUP_SREFRESH_EXIT, |
| dram->pwrup_srefresh_exit[0]); |
| } |
| |
| if (channel_mask & 2) { |
| writel(0x01000000, &ddrc1_con_0); |
| clrsetbits_le32(&denali_phy_1[957], 0x3 << 24, 0x2 << 24); |
| } |
| if (channel_mask & 2) { |
| count = 0; |
| while (!(readl(&denali_ctl_1[203]) & (1 << 3))) { |
| if (count > 1000) { |
| printf("%s: Failed to init pctl channel 1\n", |
| __func__); |
| while (1) |
| ; |
| } |
| udelay(1); |
| count++; |
| } |
| |
| writel(0x01000100, &ddrc1_con_0); |
| for (byte = 0; byte < 4; byte++) { |
| tmp = 0x820; |
| writel((tmp << 16) | tmp, |
| &denali_phy_1[53 + (128 * byte)]); |
| writel((tmp << 16) | tmp, |
| &denali_phy_1[54 + (128 * byte)]); |
| writel((tmp << 16) | tmp, |
| &denali_phy_1[55 + (128 * byte)]); |
| writel((tmp << 16) | tmp, |
| &denali_phy_1[56 + (128 * byte)]); |
| writel((tmp << 16) | tmp, |
| &denali_phy_1[57 + (128 * byte)]); |
| clrsetbits_le32(&denali_phy_1[58 + (128 * byte)], |
| 0xffff, tmp); |
| } |
| |
| clrsetbits_le32(&denali_ctl_1[68], PWRUP_SREFRESH_EXIT, |
| dram->pwrup_srefresh_exit[1]); |
| |
| /* |
| * restore channel 1 RESET original setting |
| * to avoid 240ohm too weak to prevent ESD test |
| */ |
| if (params->base.dramtype == LPDDR4) |
| clrsetbits_le32(&denali_phy_1[937], 0xff, |
| params->phy_regs.denali_phy[937] & |
| 0xFF); |
| } |
| } |
| |
| static int pctl_cfg(struct dram_info *dram, const struct chan_info *chan, |
| u32 channel, struct rk3399_sdram_params *params) |
| { |
| u32 *denali_ctl = chan->pctl->denali_ctl; |
| u32 *denali_pi = chan->pi->denali_pi; |
| u32 *denali_phy = chan->publ->denali_phy; |
| const u32 *params_ctl = params->pctl_regs.denali_ctl; |
| const u32 *params_phy = params->phy_regs.denali_phy; |
| u32 tmp, tmp1, tmp2; |
| struct rk3399_sdram_params *params_cfg; |
| u32 byte; |
| |
| dram->ops->modify_param(chan, params); |
| /* |
| * work around controller bug: |
| * Do not program DRAM_CLASS until NO_PHY_IND_TRAIN_INT is programmed |
| */ |
| sdram_copy_to_reg(&denali_ctl[1], ¶ms_ctl[1], |
| sizeof(struct rk3399_ddr_pctl_regs) - 4); |
| writel(params_ctl[0], &denali_ctl[0]); |
| |
| /* |
| * two channel init at the same time, then ZQ Cal Start |
| * at the same time, it will use the same RZQ, but cannot |
| * start at the same time. |
| * |
| * So, increase tINIT3 for channel 1, will avoid two |
| * channel ZQ Cal Start at the same time |
| */ |
| if (params->base.dramtype == LPDDR4 && channel == 1) { |
| tmp = ((params->base.ddr_freq * MHz + 999) / 1000); |
| tmp1 = readl(&denali_ctl[14]); |
| writel(tmp + tmp1, &denali_ctl[14]); |
| } |
| |
| sdram_copy_to_reg(denali_pi, ¶ms->pi_regs.denali_pi[0], |
| sizeof(struct rk3399_ddr_pi_regs)); |
| |
| /* rank count need to set for init */ |
| set_memory_map(chan, channel, params); |
| |
| writel(params->phy_regs.denali_phy[910], &denali_phy[910]); |
| writel(params->phy_regs.denali_phy[911], &denali_phy[911]); |
| writel(params->phy_regs.denali_phy[912], &denali_phy[912]); |
| |
| if (params->base.dramtype == LPDDR4) { |
| writel(params->phy_regs.denali_phy[898], &denali_phy[898]); |
| writel(params->phy_regs.denali_phy[919], &denali_phy[919]); |
| } |
| |
| dram->pwrup_srefresh_exit[channel] = readl(&denali_ctl[68]) & |
| PWRUP_SREFRESH_EXIT; |
| clrbits_le32(&denali_ctl[68], PWRUP_SREFRESH_EXIT); |
| |
| /* PHY_DLL_RST_EN */ |
| clrsetbits_le32(&denali_phy[957], 0x3 << 24, 1 << 24); |
| |
| setbits_le32(&denali_pi[0], START); |
| setbits_le32(&denali_ctl[0], START); |
| |
| /** |
| * LPDDR4 use PLL bypass mode for init |
| * not need to wait for the PLL to lock |
| */ |
| if (params->base.dramtype != LPDDR4) { |
| /* Waiting for phy DLL lock */ |
| while (1) { |
| tmp = readl(&denali_phy[920]); |
| tmp1 = readl(&denali_phy[921]); |
| tmp2 = readl(&denali_phy[922]); |
| if ((((tmp >> 16) & 0x1) == 0x1) && |
| (((tmp1 >> 16) & 0x1) == 0x1) && |
| (((tmp1 >> 0) & 0x1) == 0x1) && |
| (((tmp2 >> 0) & 0x1) == 0x1)) |
| break; |
| } |
| } |
| |
| sdram_copy_to_reg(&denali_phy[896], ¶ms_phy[896], (958 - 895) * 4); |
| sdram_copy_to_reg(&denali_phy[0], ¶ms_phy[0], (90 - 0 + 1) * 4); |
| sdram_copy_to_reg(&denali_phy[128], ¶ms_phy[128], |
| (218 - 128 + 1) * 4); |
| sdram_copy_to_reg(&denali_phy[256], ¶ms_phy[256], |
| (346 - 256 + 1) * 4); |
| sdram_copy_to_reg(&denali_phy[384], ¶ms_phy[384], |
| (474 - 384 + 1) * 4); |
| sdram_copy_to_reg(&denali_phy[512], ¶ms_phy[512], |
| (549 - 512 + 1) * 4); |
| sdram_copy_to_reg(&denali_phy[640], ¶ms_phy[640], |
| (677 - 640 + 1) * 4); |
| sdram_copy_to_reg(&denali_phy[768], ¶ms_phy[768], |
| (805 - 768 + 1) * 4); |
| |
| if (params->base.dramtype == LPDDR4) |
| params_cfg = dram->ops->get_phy_index_params(1, params); |
| else |
| params_cfg = dram->ops->get_phy_index_params(0, params); |
| |
| clrsetbits_le32(¶ms_cfg->phy_regs.denali_phy[896], 0x3 << 8, |
| 0 << 8); |
| writel(params_cfg->phy_regs.denali_phy[896], &denali_phy[896]); |
| |
| writel(params->phy_regs.denali_phy[83] + (0x10 << 16), |
| &denali_phy[83]); |
| writel(params->phy_regs.denali_phy[84] + (0x10 << 8), |
| &denali_phy[84]); |
| writel(params->phy_regs.denali_phy[211] + (0x10 << 16), |
| &denali_phy[211]); |
| writel(params->phy_regs.denali_phy[212] + (0x10 << 8), |
| &denali_phy[212]); |
| writel(params->phy_regs.denali_phy[339] + (0x10 << 16), |
| &denali_phy[339]); |
| writel(params->phy_regs.denali_phy[340] + (0x10 << 8), |
| &denali_phy[340]); |
| writel(params->phy_regs.denali_phy[467] + (0x10 << 16), |
| &denali_phy[467]); |
| writel(params->phy_regs.denali_phy[468] + (0x10 << 8), |
| &denali_phy[468]); |
| |
| if (params->base.dramtype == LPDDR4) { |
| /* |
| * to improve write dqs and dq phase from 1.5ns to 3.5ns |
| * at 50MHz. this's the measure result from oscilloscope |
| * of dqs and dq write signal. |
| */ |
| for (byte = 0; byte < 4; byte++) { |
| tmp = 0x680; |
| clrsetbits_le32(&denali_phy[1 + (128 * byte)], |
| 0xfff << 8, tmp << 8); |
| } |
| /* |
| * to workaround 366ball two channel's RESET connect to |
| * one RESET signal of die |
| */ |
| if (channel == 1) |
| clrsetbits_le32(&denali_phy[937], 0xff, |
| PHY_DRV_ODT_240 | |
| (PHY_DRV_ODT_240 << 0x4)); |
| } |
| |
| return 0; |
| } |
| |
| static void select_per_cs_training_index(const struct chan_info *chan, |
| u32 rank) |
| { |
| u32 *denali_phy = chan->publ->denali_phy; |
| |
| /* PHY_84 PHY_PER_CS_TRAINING_EN_0 1bit offset_16 */ |
| if ((readl(&denali_phy[84]) >> 16) & 1) { |
| /* |
| * PHY_8/136/264/392 |
| * phy_per_cs_training_index_X 1bit offset_24 |
| */ |
| clrsetbits_le32(&denali_phy[8], 0x1 << 24, rank << 24); |
| clrsetbits_le32(&denali_phy[136], 0x1 << 24, rank << 24); |
| clrsetbits_le32(&denali_phy[264], 0x1 << 24, rank << 24); |
| clrsetbits_le32(&denali_phy[392], 0x1 << 24, rank << 24); |
| } |
| } |
| |
| static void override_write_leveling_value(const struct chan_info *chan) |
| { |
| u32 *denali_ctl = chan->pctl->denali_ctl; |
| u32 *denali_phy = chan->publ->denali_phy; |
| u32 byte; |
| |
| /* PHY_896 PHY_FREQ_SEL_MULTICAST_EN 1bit offset_0 */ |
| setbits_le32(&denali_phy[896], 1); |
| |
| /* |
| * PHY_8/136/264/392 |
| * phy_per_cs_training_multicast_en_X 1bit offset_16 |
| */ |
| clrsetbits_le32(&denali_phy[8], 0x1 << 16, 1 << 16); |
| clrsetbits_le32(&denali_phy[136], 0x1 << 16, 1 << 16); |
| clrsetbits_le32(&denali_phy[264], 0x1 << 16, 1 << 16); |
| clrsetbits_le32(&denali_phy[392], 0x1 << 16, 1 << 16); |
| |
| for (byte = 0; byte < 4; byte++) |
| clrsetbits_le32(&denali_phy[63 + (128 * byte)], 0xffff << 16, |
| 0x200 << 16); |
| |
| /* PHY_896 PHY_FREQ_SEL_MULTICAST_EN 1bit offset_0 */ |
| clrbits_le32(&denali_phy[896], 1); |
| |
| /* CTL_200 ctrlupd_req 1bit offset_8 */ |
| clrsetbits_le32(&denali_ctl[200], 0x1 << 8, 0x1 << 8); |
| } |
| |
| static int data_training_ca(const struct chan_info *chan, u32 channel, |
| const struct rk3399_sdram_params *params) |
| { |
| u32 *denali_pi = chan->pi->denali_pi; |
| u32 *denali_phy = chan->publ->denali_phy; |
| u32 i, tmp; |
| u32 obs_0, obs_1, obs_2, obs_err = 0; |
| u32 rank = params->ch[channel].cap_info.rank; |
| u32 rank_mask; |
| |
| /* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */ |
| writel(0x00003f7c, (&denali_pi[175])); |
| |
| if (params->base.dramtype == LPDDR4) |
| rank_mask = (rank == 1) ? 0x5 : 0xf; |
| else |
| rank_mask = (rank == 1) ? 0x1 : 0x3; |
| |
| for (i = 0; i < 4; i++) { |
| if (!(rank_mask & (1 << i))) |
| continue; |
| |
| select_per_cs_training_index(chan, i); |
| |
| /* PI_100 PI_CALVL_EN:RW:8:2 */ |
| clrsetbits_le32(&denali_pi[100], 0x3 << 8, 0x2 << 8); |
| |
| /* PI_92 PI_CALVL_REQ:WR:16:1,PI_CALVL_CS:RW:24:2 */ |
| clrsetbits_le32(&denali_pi[92], |
| (0x1 << 16) | (0x3 << 24), |
| (0x1 << 16) | (i << 24)); |
| |
| /* Waiting for training complete */ |
| while (1) { |
| /* PI_174 PI_INT_STATUS:RD:8:18 */ |
| tmp = readl(&denali_pi[174]) >> 8; |
| /* |
| * check status obs |
| * PHY_532/660/789 phy_adr_calvl_obs1_:0:32 |
| */ |
| obs_0 = readl(&denali_phy[532]); |
| obs_1 = readl(&denali_phy[660]); |
| obs_2 = readl(&denali_phy[788]); |
| if (((obs_0 >> 30) & 0x3) || |
| ((obs_1 >> 30) & 0x3) || |
| ((obs_2 >> 30) & 0x3)) |
| obs_err = 1; |
| if ((((tmp >> 11) & 0x1) == 0x1) && |
| (((tmp >> 13) & 0x1) == 0x1) && |
| (((tmp >> 5) & 0x1) == 0x0) && |
| obs_err == 0) |
| break; |
| else if ((((tmp >> 5) & 0x1) == 0x1) || |
| (obs_err == 1)) |
| return -EIO; |
| } |
| |
| /* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */ |
| writel(0x00003f7c, (&denali_pi[175])); |
| } |
| |
| clrbits_le32(&denali_pi[100], 0x3 << 8); |
| |
| return 0; |
| } |
| |
| static int data_training_wl(const struct chan_info *chan, u32 channel, |
| const struct rk3399_sdram_params *params) |
| { |
| u32 *denali_pi = chan->pi->denali_pi; |
| u32 *denali_phy = chan->publ->denali_phy; |
| u32 i, tmp; |
| u32 obs_0, obs_1, obs_2, obs_3, obs_err = 0; |
| u32 rank = params->ch[channel].cap_info.rank; |
| |
| /* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */ |
| writel(0x00003f7c, (&denali_pi[175])); |
| |
| for (i = 0; i < rank; i++) { |
| select_per_cs_training_index(chan, i); |
| |
| /* PI_60 PI_WRLVL_EN:RW:8:2 */ |
| clrsetbits_le32(&denali_pi[60], 0x3 << 8, 0x2 << 8); |
| |
| /* PI_59 PI_WRLVL_REQ:WR:8:1,PI_WRLVL_CS:RW:16:2 */ |
| clrsetbits_le32(&denali_pi[59], |
| (0x1 << 8) | (0x3 << 16), |
| (0x1 << 8) | (i << 16)); |
| |
| /* Waiting for training complete */ |
| while (1) { |
| /* PI_174 PI_INT_STATUS:RD:8:18 */ |
| tmp = readl(&denali_pi[174]) >> 8; |
| |
| /* |
| * check status obs, if error maybe can not |
| * get leveling done PHY_40/168/296/424 |
| * phy_wrlvl_status_obs_X:0:13 |
| */ |
| obs_0 = readl(&denali_phy[40]); |
| obs_1 = readl(&denali_phy[168]); |
| obs_2 = readl(&denali_phy[296]); |
| obs_3 = readl(&denali_phy[424]); |
| if (((obs_0 >> 12) & 0x1) || |
| ((obs_1 >> 12) & 0x1) || |
| ((obs_2 >> 12) & 0x1) || |
| ((obs_3 >> 12) & 0x1)) |
| obs_err = 1; |
| if ((((tmp >> 10) & 0x1) == 0x1) && |
| (((tmp >> 13) & 0x1) == 0x1) && |
| (((tmp >> 4) & 0x1) == 0x0) && |
| obs_err == 0) |
| break; |
| else if ((((tmp >> 4) & 0x1) == 0x1) || |
| (obs_err == 1)) |
| return -EIO; |
| } |
| |
| /* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */ |
| writel(0x00003f7c, (&denali_pi[175])); |
| } |
| |
| override_write_leveling_value(chan); |
| clrbits_le32(&denali_pi[60], 0x3 << 8); |
| |
| return 0; |
| } |
| |
| static int data_training_rg(const struct chan_info *chan, u32 channel, |
| const struct rk3399_sdram_params *params) |
| { |
| u32 *denali_pi = chan->pi->denali_pi; |
| u32 *denali_phy = chan->publ->denali_phy; |
| u32 i, tmp; |
| u32 obs_0, obs_1, obs_2, obs_3, obs_err = 0; |
| u32 rank = params->ch[channel].cap_info.rank; |
| |
| /* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */ |
| writel(0x00003f7c, (&denali_pi[175])); |
| |
| for (i = 0; i < rank; i++) { |
| select_per_cs_training_index(chan, i); |
| |
| /* PI_80 PI_RDLVL_GATE_EN:RW:24:2 */ |
| clrsetbits_le32(&denali_pi[80], 0x3 << 24, 0x2 << 24); |
| |
| /* |
| * PI_74 PI_RDLVL_GATE_REQ:WR:16:1 |
| * PI_RDLVL_CS:RW:24:2 |
| */ |
| clrsetbits_le32(&denali_pi[74], |
| (0x1 << 16) | (0x3 << 24), |
| (0x1 << 16) | (i << 24)); |
| |
| /* Waiting for training complete */ |
| while (1) { |
| /* PI_174 PI_INT_STATUS:RD:8:18 */ |
| tmp = readl(&denali_pi[174]) >> 8; |
| |
| /* |
| * check status obs |
| * PHY_43/171/299/427 |
| * PHY_GTLVL_STATUS_OBS_x:16:8 |
| */ |
| obs_0 = readl(&denali_phy[43]); |
| obs_1 = readl(&denali_phy[171]); |
| obs_2 = readl(&denali_phy[299]); |
| obs_3 = readl(&denali_phy[427]); |
| if (((obs_0 >> (16 + 6)) & 0x3) || |
| ((obs_1 >> (16 + 6)) & 0x3) || |
| ((obs_2 >> (16 + 6)) & 0x3) || |
| ((obs_3 >> (16 + 6)) & 0x3)) |
| obs_err = 1; |
| if ((((tmp >> 9) & 0x1) == 0x1) && |
| (((tmp >> 13) & 0x1) == 0x1) && |
| (((tmp >> 3) & 0x1) == 0x0) && |
| obs_err == 0) |
| break; |
| else if ((((tmp >> 3) & 0x1) == 0x1) || |
| (obs_err == 1)) |
| return -EIO; |
| } |
| |
| /* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */ |
| writel(0x00003f7c, (&denali_pi[175])); |
| } |
| |
| clrbits_le32(&denali_pi[80], 0x3 << 24); |
| |
| return 0; |
| } |
| |
| static int data_training_rl(const struct chan_info *chan, u32 channel, |
| const struct rk3399_sdram_params *params) |
| { |
| u32 *denali_pi = chan->pi->denali_pi; |
| u32 i, tmp; |
| u32 rank = params->ch[channel].cap_info.rank; |
| |
| /* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */ |
| writel(0x00003f7c, (&denali_pi[175])); |
| |
| for (i = 0; i < rank; i++) { |
| select_per_cs_training_index(chan, i); |
| |
| /* PI_80 PI_RDLVL_EN:RW:16:2 */ |
| clrsetbits_le32(&denali_pi[80], 0x3 << 16, 0x2 << 16); |
| |
| /* PI_74 PI_RDLVL_REQ:WR:8:1,PI_RDLVL_CS:RW:24:2 */ |
| clrsetbits_le32(&denali_pi[74], |
| (0x1 << 8) | (0x3 << 24), |
| (0x1 << 8) | (i << 24)); |
| |
| /* Waiting for training complete */ |
| while (1) { |
| /* PI_174 PI_INT_STATUS:RD:8:18 */ |
| tmp = readl(&denali_pi[174]) >> 8; |
| |
| /* |
| * make sure status obs not report error bit |
| * PHY_46/174/302/430 |
| * phy_rdlvl_status_obs_X:16:8 |
| */ |
| if ((((tmp >> 8) & 0x1) == 0x1) && |
| (((tmp >> 13) & 0x1) == 0x1) && |
| (((tmp >> 2) & 0x1) == 0x0)) |
| break; |
| else if (((tmp >> 2) & 0x1) == 0x1) |
| return -EIO; |
| } |
| |
| /* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */ |
| writel(0x00003f7c, (&denali_pi[175])); |
| } |
| |
| clrbits_le32(&denali_pi[80], 0x3 << 16); |
| |
| return 0; |
| } |
| |
| static int data_training_wdql(const struct chan_info *chan, u32 channel, |
| const struct rk3399_sdram_params *params) |
| { |
| u32 *denali_pi = chan->pi->denali_pi; |
| u32 i, tmp; |
| u32 rank = params->ch[channel].cap_info.rank; |
| u32 rank_mask; |
| |
| /* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */ |
| writel(0x00003f7c, (&denali_pi[175])); |
| |
| if (params->base.dramtype == LPDDR4) |
| rank_mask = (rank == 1) ? 0x5 : 0xf; |
| else |
| rank_mask = (rank == 1) ? 0x1 : 0x3; |
| |
| for (i = 0; i < 4; i++) { |
| if (!(rank_mask & (1 << i))) |
| continue; |
| |
| select_per_cs_training_index(chan, i); |
| |
| /* |
| * disable PI_WDQLVL_VREF_EN before wdq leveling? |
| * PI_117 PI_WDQLVL_VREF_EN:RW:8:1 |
| */ |
| clrbits_le32(&denali_pi[117], 0x1 << 8); |
| /* PI_124 PI_WDQLVL_EN:RW:16:2 */ |
| clrsetbits_le32(&denali_pi[124], 0x3 << 16, 0x2 << 16); |
| |
| /* PI_121 PI_WDQLVL_REQ:WR:8:1,PI_WDQLVL_CS:RW:16:2 */ |
| clrsetbits_le32(&denali_pi[121], |
| (0x1 << 8) | (0x3 << 16), |
| (0x1 << 8) | (i << 16)); |
| |
| /* Waiting for training complete */ |
| while (1) { |
| /* PI_174 PI_INT_STATUS:RD:8:18 */ |
| tmp = readl(&denali_pi[174]) >> 8; |
| if ((((tmp >> 12) & 0x1) == 0x1) && |
| (((tmp >> 13) & 0x1) == 0x1) && |
| (((tmp >> 6) & 0x1) == 0x0)) |
| break; |
| else if (((tmp >> 6) & 0x1) == 0x1) |
| return -EIO; |
| } |
| |
| /* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */ |
| writel(0x00003f7c, (&denali_pi[175])); |
| } |
| |
| clrbits_le32(&denali_pi[124], 0x3 << 16); |
| |
| return 0; |
| } |
| |
| static int data_training(struct dram_info *dram, u32 channel, |
| const struct rk3399_sdram_params *params, |
| u32 training_flag) |
| { |
| struct chan_info *chan = &dram->chan[channel]; |
| u32 *denali_phy = chan->publ->denali_phy; |
| int ret; |
| |
| /* PHY_927 PHY_PAD_DQS_DRIVE RPULL offset_22 */ |
| setbits_le32(&denali_phy[927], (1 << 22)); |
| |
| if (training_flag == PI_FULL_TRAINING) { |
| if (params->base.dramtype == LPDDR4) { |
| training_flag = PI_WRITE_LEVELING | |
| PI_READ_GATE_TRAINING | |
| PI_READ_LEVELING | PI_WDQ_LEVELING; |
| } else if (params->base.dramtype == LPDDR3) { |
| training_flag = PI_CA_TRAINING | PI_WRITE_LEVELING | |
| PI_READ_GATE_TRAINING; |
| } else if (params->base.dramtype == DDR3) { |
| training_flag = PI_WRITE_LEVELING | |
| PI_READ_GATE_TRAINING | |
| PI_READ_LEVELING; |
| } |
| } |
| |
| /* ca training(LPDDR4,LPDDR3 support) */ |
| if ((training_flag & PI_CA_TRAINING) == PI_CA_TRAINING) { |
| ret = data_training_ca(chan, channel, params); |
| if (ret < 0) { |
| debug("%s: data training ca failed\n", __func__); |
| return ret; |
| } |
| } |
| |
| /* write leveling(LPDDR4,LPDDR3,DDR3 support) */ |
| if ((training_flag & PI_WRITE_LEVELING) == PI_WRITE_LEVELING) { |
| ret = data_training_wl(chan, channel, params); |
| if (ret < 0) { |
| debug("%s: data training wl failed\n", __func__); |
| return ret; |
| } |
| } |
| |
| /* read gate training(LPDDR4,LPDDR3,DDR3 support) */ |
| if ((training_flag & PI_READ_GATE_TRAINING) == PI_READ_GATE_TRAINING) { |
| ret = data_training_rg(chan, channel, params); |
| if (ret < 0) { |
| debug("%s: data training rg failed\n", __func__); |
| return ret; |
| } |
| } |
| |
| /* read leveling(LPDDR4,LPDDR3,DDR3 support) */ |
| if ((training_flag & PI_READ_LEVELING) == PI_READ_LEVELING) { |
| ret = data_training_rl(chan, channel, params); |
| if (ret < 0) { |
| debug("%s: data training rl failed\n", __func__); |
| return ret; |
| } |
| } |
| |
| /* wdq leveling(LPDDR4 support) */ |
| if ((training_flag & PI_WDQ_LEVELING) == PI_WDQ_LEVELING) { |
| ret = data_training_wdql(chan, channel, params); |
| if (ret < 0) { |
| debug("%s: data training wdql failed\n", __func__); |
| return ret; |
| } |
| } |
| |
| /* PHY_927 PHY_PAD_DQS_DRIVE RPULL offset_22 */ |
| clrbits_le32(&denali_phy[927], (1 << 22)); |
| |
| return 0; |
| } |
| |
| static void set_ddrconfig(const struct chan_info *chan, |
| const struct rk3399_sdram_params *params, |
| unsigned char channel, u32 ddrconfig) |
| { |
| /* only need to set ddrconfig */ |
| struct msch_regs *ddr_msch_regs = chan->msch; |
| unsigned int cs0_cap = 0; |
| unsigned int cs1_cap = 0; |
| |
| cs0_cap = (1 << (params->ch[channel].cap_info.cs0_row |
| + params->ch[channel].cap_info.col |
| + params->ch[channel].cap_info.bk |
| + params->ch[channel].cap_info.bw - 20)); |
| if (params->ch[channel].cap_info.rank > 1) |
| cs1_cap = cs0_cap >> (params->ch[channel].cap_info.cs0_row |
| - params->ch[channel].cap_info.cs1_row); |
| if (params->ch[channel].cap_info.row_3_4) { |
| cs0_cap = cs0_cap * 3 / 4; |
| cs1_cap = cs1_cap * 3 / 4; |
| } |
| |
| writel(ddrconfig | (ddrconfig << 8), &ddr_msch_regs->ddrconf); |
| writel(((cs0_cap / 32) & 0xff) | (((cs1_cap / 32) & 0xff) << 8), |
| &ddr_msch_regs->ddrsize); |
| } |
| |
| static void sdram_msch_config(struct msch_regs *msch, |
| struct sdram_msch_timings *noc_timings) |
| { |
| writel(noc_timings->ddrtiminga0.d32, |
| &msch->ddrtiminga0.d32); |
| writel(noc_timings->ddrtimingb0.d32, |
| &msch->ddrtimingb0.d32); |
| writel(noc_timings->ddrtimingc0.d32, |
| &msch->ddrtimingc0.d32); |
| writel(noc_timings->devtodev0.d32, |
| &msch->devtodev0.d32); |
| writel(noc_timings->ddrmode.d32, |
| &msch->ddrmode.d32); |
| } |
| |
| static void dram_all_config(struct dram_info *dram, |
| struct rk3399_sdram_params *params) |
| { |
| u32 sys_reg2 = 0; |
| u32 sys_reg3 = 0; |
| unsigned int channel, idx; |
| |
| for (channel = 0, idx = 0; |
| (idx < params->base.num_channels) && (channel < 2); |
| channel++) { |
| struct msch_regs *ddr_msch_regs; |
| struct sdram_msch_timings *noc_timing; |
| |
| if (params->ch[channel].cap_info.col == 0) |
| continue; |
| idx++; |
| sdram_org_config(¶ms->ch[channel].cap_info, |
| ¶ms->base, &sys_reg2, |
| &sys_reg3, channel); |
| ddr_msch_regs = dram->chan[channel].msch; |
| noc_timing = ¶ms->ch[channel].noc_timings; |
| sdram_msch_config(ddr_msch_regs, noc_timing); |
| |
| /** |
| * rank 1 memory clock disable (dfi_dram_clk_disable = 1) |
| * |
| * The hardware for LPDDR4 with |
| * - CLK0P/N connect to lower 16-bits |
| * - CLK1P/N connect to higher 16-bits |
| * |
| * dfi dram clk is configured via CLK1P/N, so disabling |
| * dfi dram clk will disable the CLK1P/N as well for lpddr4. |
| */ |
| if (params->ch[channel].cap_info.rank == 1 && |
| params->base.dramtype != LPDDR4) |
| setbits_le32(&dram->chan[channel].pctl->denali_ctl[276], |
| 1 << 17); |
| } |
| |
| writel(sys_reg2, &dram->pmugrf->os_reg2); |
| writel(sys_reg3, &dram->pmugrf->os_reg3); |
| rk_clrsetreg(&dram->pmusgrf->soc_con4, 0x1f << 10, |
| params->base.stride << 10); |
| |
| /* reboot hold register set */ |
| writel(PRESET_SGRF_HOLD(0) | PRESET_GPIO0_HOLD(1) | |
| PRESET_GPIO1_HOLD(1), |
| &dram->pmucru->pmucru_rstnhold_con[1]); |
| clrsetbits_le32(&dram->cru->glb_rst_con, 0x3, 0x3); |
| } |
| |
| static void set_cap_relate_config(const struct chan_info *chan, |
| struct rk3399_sdram_params *params, |
| unsigned int channel) |
| { |
| u32 *denali_ctl = chan->pctl->denali_ctl; |
| u32 tmp; |
| struct sdram_msch_timings *noc_timing; |
| |
| if (params->base.dramtype == LPDDR3) { |
| tmp = (8 << params->ch[channel].cap_info.bw) / |
| (8 << params->ch[channel].cap_info.dbw); |
| |
| /** |
| * memdata_ratio |
| * 1 -> 0, 2 -> 1, 4 -> 2 |
| */ |
| clrsetbits_le32(&denali_ctl[197], 0x7, |
| (tmp >> 1)); |
| clrsetbits_le32(&denali_ctl[198], 0x7 << 8, |
| (tmp >> 1) << 8); |
| } |
| |
| noc_timing = ¶ms->ch[channel].noc_timings; |
| |
| /* |
| * noc timing bw relate timing is 32 bit, and real bw is 16bit |
| * actually noc reg is setting at function dram_all_config |
| */ |
| if (params->ch[channel].cap_info.bw == 16 && |
| noc_timing->ddrmode.b.mwrsize == 2) { |
| if (noc_timing->ddrmode.b.burstsize) |
| noc_timing->ddrmode.b.burstsize -= 1; |
| noc_timing->ddrmode.b.mwrsize -= 1; |
| noc_timing->ddrtimingc0.b.burstpenalty *= 2; |
| noc_timing->ddrtimingc0.b.wrtomwr *= 2; |
| } |
| } |
| |
| static u32 calculate_ddrconfig(struct rk3399_sdram_params *params, u32 channel) |
| { |
| unsigned int cs0_row = params->ch[channel].cap_info.cs0_row; |
| unsigned int col = params->ch[channel].cap_info.col; |
| unsigned int bw = params->ch[channel].cap_info.bw; |
| u16 ddr_cfg_2_rbc[] = { |
| /* |
| * [6] highest bit col |
| * [5:3] max row(14+n) |
| * [2] insertion row |
| * [1:0] col(9+n),col, data bus 32bit |
| * |
| * highbitcol, max_row, insertion_row, col |
| */ |
| ((0 << 6) | (2 << 3) | (0 << 2) | 0), /* 0 */ |
| ((0 << 6) | (2 << 3) | (0 << 2) | 1), /* 1 */ |
| ((0 << 6) | (1 << 3) | (0 << 2) | 2), /* 2 */ |
| ((0 << 6) | (0 << 3) | (0 << 2) | 3), /* 3 */ |
| ((0 << 6) | (2 << 3) | (1 << 2) | 1), /* 4 */ |
| ((0 << 6) | (1 << 3) | (1 << 2) | 2), /* 5 */ |
| ((1 << 6) | (0 << 3) | (0 << 2) | 2), /* 6 */ |
| ((1 << 6) | (1 << 3) | (0 << 2) | 2), /* 7 */ |
| }; |
| u32 i; |
| |
| col -= (bw == 2) ? 0 : 1; |
| col -= 9; |
| |
| for (i = 0; i < 4; i++) { |
| if ((col == (ddr_cfg_2_rbc[i] & 0x3)) && |
| (cs0_row <= (((ddr_cfg_2_rbc[i] >> 3) & 0x7) + 14))) |
| break; |
| } |
| |
| if (i >= 4) |
| i = -EINVAL; |
| |
| return i; |
| } |
| |
| static void set_ddr_stride(struct rk3399_pmusgrf_regs *pmusgrf, u32 stride) |
| { |
| rk_clrsetreg(&pmusgrf->soc_con4, 0x1f << 10, stride << 10); |
| } |
| |
| #if !defined(CONFIG_RAM_RK3399_LPDDR4) |
| static int data_training_first(struct dram_info *dram, u32 channel, u8 rank, |
| struct rk3399_sdram_params *params) |
| { |
| u8 training_flag = PI_READ_GATE_TRAINING; |
| |
| /* |
| * LPDDR3 CA training msut be trigger before |
| * other training. |
| * DDR3 is not have CA training. |
| */ |
| |
| if (params->base.dramtype == LPDDR3) |
| training_flag |= PI_CA_TRAINING; |
| |
| return data_training(dram, channel, params, training_flag); |
| } |
| |
| static int switch_to_phy_index1(struct dram_info *dram, |
| struct rk3399_sdram_params *params) |
| { |
| u32 channel; |
| u32 *denali_phy; |
| u32 ch_count = params->base.num_channels; |
| int ret; |
| int i = 0; |
| |
| writel(RK_CLRSETBITS(0x03 << 4 | 1 << 2 | 1, |
| 1 << 4 | 1 << 2 | 1), |
| &dram->cic->cic_ctrl0); |
| while (!(readl(&dram->cic->cic_status0) & (1 << 2))) { |
| mdelay(10); |
| i++; |
| if (i > 10) { |
| debug("index1 frequency change overtime\n"); |
| return -ETIME; |
| } |
| } |
| |
| i = 0; |
| writel(RK_CLRSETBITS(1 << 1, 1 << 1), &dram->cic->cic_ctrl0); |
| while (!(readl(&dram->cic->cic_status0) & (1 << 0))) { |
| mdelay(10); |
| i++; |
| if (i > 10) { |
| debug("index1 frequency done overtime\n"); |
| return -ETIME; |
| } |
| } |
| |
| for (channel = 0; channel < ch_count; channel++) { |
| denali_phy = dram->chan[channel].publ->denali_phy; |
| clrsetbits_le32(&denali_phy[896], (0x3 << 8) | 1, 1 << 8); |
| ret = data_training(dram, channel, params, PI_FULL_TRAINING); |
| if (ret < 0) { |
| debug("index1 training failed\n"); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| struct rk3399_sdram_params |
| *get_phy_index_params(u32 phy_fn, |
| struct rk3399_sdram_params *params) |
| { |
| if (phy_fn == 0) |
| return params; |
| else |
| return NULL; |
| } |
| |
| void modify_param(const struct chan_info *chan, |
| struct rk3399_sdram_params *params) |
| { |
| struct rk3399_sdram_params *params_cfg; |
| u32 *denali_pi_params; |
| |
| denali_pi_params = params->pi_regs.denali_pi; |
| |
| /* modify PHY F0/F1/F2 params */ |
| params_cfg = get_phy_index_params(0, params); |
| set_ds_odt(chan, params_cfg, false, 0); |
| |
| clrsetbits_le32(&denali_pi_params[45], 0x1 << 24, 0x1 << 24); |
| clrsetbits_le32(&denali_pi_params[61], 0x1 << 24, 0x1 << 24); |
| clrsetbits_le32(&denali_pi_params[76], 0x1 << 24, 0x1 << 24); |
| clrsetbits_le32(&denali_pi_params[77], 0x1, 0x1); |
| } |
| #else |
| |
| struct rk3399_sdram_params dfs_cfgs_lpddr4[] = { |
| #include "sdram-rk3399-lpddr4-400.inc" |
| #include "sdram-rk3399-lpddr4-800.inc" |
| }; |
| |
| static struct rk3399_sdram_params |
| *lpddr4_get_phy_index_params(u32 phy_fn, |
| struct rk3399_sdram_params *params) |
| { |
| if (phy_fn == 0) |
| return params; |
| else if (phy_fn == 1) |
| return &dfs_cfgs_lpddr4[1]; |
| else if (phy_fn == 2) |
| return &dfs_cfgs_lpddr4[0]; |
| else |
| return NULL; |
| } |
| |
| static void *get_denali_pi(const struct chan_info *chan, |
| struct rk3399_sdram_params *params, bool reg) |
| { |
| return reg ? &chan->pi->denali_pi : ¶ms->pi_regs.denali_pi; |
| } |
| |
| static u32 lpddr4_get_phy_fn(struct rk3399_sdram_params *params, u32 ctl_fn) |
| { |
| u32 lpddr4_phy_fn[] = {1, 0, 0xb}; |
| |
| return lpddr4_phy_fn[ctl_fn]; |
| } |
| |
| static u32 lpddr4_get_ctl_fn(struct rk3399_sdram_params *params, u32 phy_fn) |
| { |
| u32 lpddr4_ctl_fn[] = {1, 0, 2}; |
| |
| return lpddr4_ctl_fn[phy_fn]; |
| } |
| |
| static u32 get_ddr_stride(struct rk3399_pmusgrf_regs *pmusgrf) |
| { |
| return ((readl(&pmusgrf->soc_con4) >> 10) & 0x1F); |
| } |
| |
| /* |
| * read mr_num mode register |
| * rank = 1: cs0 |
| * rank = 2: cs1 |
| */ |
| static int read_mr(struct rk3399_ddr_pctl_regs *ddr_pctl_regs, u32 rank, |
| u32 mr_num, u32 *buf) |
| { |
| s32 timeout = 100; |
| |
| writel(((1 << 16) | (((rank == 2) ? 1 : 0) << 8) | mr_num) << 8, |
| &ddr_pctl_regs->denali_ctl[118]); |
| |
| while (0 == (readl(&ddr_pctl_regs->denali_ctl[203]) & |
| ((1 << 21) | (1 << 12)))) { |
| udelay(1); |
| |
| if (timeout <= 0) { |
| printf("%s: pctl timeout!\n", __func__); |
| return -ETIMEDOUT; |
| } |
| |
| timeout--; |
| } |
| |
| if (!(readl(&ddr_pctl_regs->denali_ctl[203]) & (1 << 12))) { |
| *buf = readl(&ddr_pctl_regs->denali_ctl[119]) & 0xFF; |
| } else { |
| printf("%s: read mr failed with 0x%x status\n", __func__, |
| readl(&ddr_pctl_regs->denali_ctl[17]) & 0x3); |
| *buf = 0; |
| } |
| |
| setbits_le32(&ddr_pctl_regs->denali_ctl[205], (1 << 21) | (1 << 12)); |
| |
| return 0; |
| } |
| |
| static int lpddr4_mr_detect(struct dram_info *dram, u32 channel, u8 rank, |
| struct rk3399_sdram_params *params) |
| { |
| u64 cs0_cap; |
| u32 stride; |
| u32 cs = 0, col = 0, bk = 0, bw = 0, row_3_4 = 0; |
| u32 cs0_row = 0, cs1_row = 0, ddrconfig = 0; |
| u32 mr5, mr12, mr14; |
| struct chan_info *chan = &dram->chan[channel]; |
| struct rk3399_ddr_pctl_regs *ddr_pctl_regs = chan->pctl; |
| void __iomem *addr = NULL; |
| int ret = 0; |
| u32 val; |
| |
| stride = get_ddr_stride(dram->pmusgrf); |
| |
| if (params->ch[channel].cap_info.col == 0) { |
| ret = -EPERM; |
| goto end; |
| } |
| |
| cs = params->ch[channel].cap_info.rank; |
| col = params->ch[channel].cap_info.col; |
| bk = params->ch[channel].cap_info.bk; |
| bw = params->ch[channel].cap_info.bw; |
| row_3_4 = params->ch[channel].cap_info.row_3_4; |
| cs0_row = params->ch[channel].cap_info.cs0_row; |
| cs1_row = params->ch[channel].cap_info.cs1_row; |
| ddrconfig = params->ch[channel].cap_info.ddrconfig; |
| |
| /* 2GB */ |
| params->ch[channel].cap_info.rank = 2; |
| params->ch[channel].cap_info.col = 10; |
| params->ch[channel].cap_info.bk = 3; |
| params->ch[channel].cap_info.bw = 2; |
| params->ch[channel].cap_info.row_3_4 = 0; |
| params->ch[channel].cap_info.cs0_row = 15; |
| params->ch[channel].cap_info.cs1_row = 15; |
| params->ch[channel].cap_info.ddrconfig = 1; |
| |
| set_memory_map(chan, channel, params); |
| params->ch[channel].cap_info.ddrconfig = |
| calculate_ddrconfig(params, channel); |
| set_ddrconfig(chan, params, channel, |
| params->ch[channel].cap_info.ddrconfig); |
| set_cap_relate_config(chan, params, channel); |
| |
| cs0_cap = (1 << (params->ch[channel].cap_info.bw |
| + params->ch[channel].cap_info.col |
| + params->ch[channel].cap_info.bk |
| + params->ch[channel].cap_info.cs0_row)); |
| |
| if (params->ch[channel].cap_info.row_3_4) |
| cs0_cap = cs0_cap * 3 / 4; |
| |
| if (channel == 0) |
| set_ddr_stride(dram->pmusgrf, 0x17); |
| else |
| set_ddr_stride(dram->pmusgrf, 0x18); |
| |
| /* read and write data to DRAM, avoid be optimized by compiler. */ |
| if (rank == 1) |
| addr = (void __iomem *)0x100; |
| else if (rank == 2) |
| addr = (void __iomem *)(cs0_cap + 0x100); |
| |
| val = readl(addr); |
| writel(val + 1, addr); |
| |
| read_mr(ddr_pctl_regs, rank, 5, &mr5); |
| read_mr(ddr_pctl_regs, rank, 12, &mr12); |
| read_mr(ddr_pctl_regs, rank, 14, &mr14); |
| |
| if (mr5 == 0 || mr12 != 0x4d || mr14 != 0x4d) { |
| ret = -EINVAL; |
| goto end; |
| } |
| end: |
| params->ch[channel].cap_info.rank = cs; |
| params->ch[channel].cap_info.col = col; |
| params->ch[channel].cap_info.bk = bk; |
| params->ch[channel].cap_info.bw = bw; |
| params->ch[channel].cap_info.row_3_4 = row_3_4; |
| params->ch[channel].cap_info.cs0_row = cs0_row; |
| params->ch[channel].cap_info.cs1_row = cs1_row; |
| params->ch[channel].cap_info.ddrconfig = ddrconfig; |
| |
| set_ddr_stride(dram->pmusgrf, stride); |
| |
| return ret; |
| } |
| |
| static void set_lpddr4_dq_odt(const struct chan_info *chan, |
| struct rk3399_sdram_params *params, u32 ctl_fn, |
| bool en, bool ctl_phy_reg, u32 mr5) |
| { |
| u32 *denali_ctl = get_denali_ctl(chan, params, ctl_phy_reg); |
| u32 *denali_pi = get_denali_pi(chan, params, ctl_phy_reg); |
| struct io_setting *io; |
| u32 reg_value; |
| |
| io = lpddr4_get_io_settings(params, mr5); |
| if (en) |
| reg_value = io->dq_odt; |
| else |
| reg_value = 0; |
| |
| switch (ctl_fn) { |
| case 0: |
| clrsetbits_le32(&denali_ctl[139], 0x7 << 24, reg_value << 24); |
| clrsetbits_le32(&denali_ctl[153], 0x7 << 24, reg_value << 24); |
| |
| clrsetbits_le32(&denali_pi[132], 0x7 << 0, (reg_value << 0)); |
| clrsetbits_le32(&denali_pi[139], 0x7 << 16, (reg_value << 16)); |
| clrsetbits_le32(&denali_pi[147], 0x7 << 0, (reg_value << 0)); |
| clrsetbits_le32(&denali_pi[154], 0x7 << 16, (reg_value << 16)); |
| break; |
| case 1: |
| clrsetbits_le32(&denali_ctl[140], 0x7 << 0, reg_value << 0); |
| clrsetbits_le32(&denali_ctl[154], 0x7 << 0, reg_value << 0); |
| |
| clrsetbits_le32(&denali_pi[129], 0x7 << 16, (reg_value << 16)); |
| clrsetbits_le32(&denali_pi[137], 0x7 << 0, (reg_value << 0)); |
| clrsetbits_le32(&denali_pi[144], 0x7 << 16, (reg_value << 16)); |
| clrsetbits_le32(&denali_pi[152], 0x7 << 0, (reg_value << 0)); |
| break; |
| case 2: |
| default: |
| clrsetbits_le32(&denali_ctl[140], 0x7 << 8, (reg_value << 8)); |
| clrsetbits_le32(&denali_ctl[154], 0x7 << 8, (reg_value << 8)); |
| |
| clrsetbits_le32(&denali_pi[127], 0x7 << 0, (reg_value << 0)); |
| clrsetbits_le32(&denali_pi[134], 0x7 << 16, (reg_value << 16)); |
| clrsetbits_le32(&denali_pi[142], 0x7 << 0, (reg_value << 0)); |
| clrsetbits_le32(&denali_pi[149], 0x7 << 16, (reg_value << 16)); |
| break; |
| } |
| } |
| |
| static void set_lpddr4_ca_odt(const struct chan_info *chan, |
| struct rk3399_sdram_params *params, u32 ctl_fn, |
| bool en, bool ctl_phy_reg, u32 mr5) |
| { |
| u32 *denali_ctl = get_denali_ctl(chan, params, ctl_phy_reg); |
| u32 *denali_pi = get_denali_pi(chan, params, ctl_phy_reg); |
| struct io_setting *io; |
| u32 reg_value; |
| |
| io = lpddr4_get_io_settings(params, mr5); |
| if (en) |
| reg_value = io->ca_odt; |
| else |
| reg_value = 0; |
| |
| switch (ctl_fn) { |
| case 0: |
| clrsetbits_le32(&denali_ctl[139], 0x7 << 28, reg_value << 28); |
| clrsetbits_le32(&denali_ctl[153], 0x7 << 28, reg_value << 28); |
| |
| clrsetbits_le32(&denali_pi[132], 0x7 << 4, reg_value << 4); |
| clrsetbits_le32(&denali_pi[139], 0x7 << 20, reg_value << 20); |
| clrsetbits_le32(&denali_pi[147], 0x7 << 4, reg_value << 4); |
| clrsetbits_le32(&denali_pi[154], 0x7 << 20, reg_value << 20); |
| break; |
| case 1: |
| clrsetbits_le32(&denali_ctl[140], 0x7 << 4, reg_value << 4); |
| clrsetbits_le32(&denali_ctl[154], 0x7 << 4, reg_value << 4); |
| |
| clrsetbits_le32(&denali_pi[129], 0x7 << 20, reg_value << 20); |
| clrsetbits_le32(&denali_pi[137], 0x7 << 4, reg_value << 4); |
| clrsetbits_le32(&denali_pi[144], 0x7 << 20, reg_value << 20); |
| clrsetbits_le32(&denali_pi[152], 0x7 << 4, reg_value << 4); |
| break; |
| case 2: |
| default: |
| clrsetbits_le32(&denali_ctl[140], 0x7 << 12, (reg_value << 12)); |
| clrsetbits_le32(&denali_ctl[154], 0x7 << 12, (reg_value << 12)); |
| |
| clrsetbits_le32(&denali_pi[127], 0x7 << 4, reg_value << 4); |
| clrsetbits_le32(&denali_pi[134], 0x7 << 20, reg_value << 20); |
| clrsetbits_le32(&denali_pi[142], 0x7 << 4, reg_value << 4); |
| clrsetbits_le32(&denali_pi[149], 0x7 << 20, reg_value << 20); |
| break; |
| } |
| } |
| |
| static void set_lpddr4_MR3(const struct chan_info *chan, |
| struct rk3399_sdram_params *params, u32 ctl_fn, |
| bool ctl_phy_reg, u32 mr5) |
| { |
| u32 *denali_ctl = get_denali_ctl(chan, params, ctl_phy_reg); |
| u32 *denali_pi = get_denali_pi(chan, params, ctl_phy_reg); |
| struct io_setting *io; |
| u32 reg_value; |
| |
| io = lpddr4_get_io_settings(params, mr5); |
| |
| reg_value = ((io->pdds << 3) | 1); |
| |
| switch (ctl_fn) { |
| case 0: |
| clrsetbits_le32(&denali_ctl[138], 0xFFFF, reg_value); |
| clrsetbits_le32(&denali_ctl[152], 0xFFFF, reg_value); |
| |
| clrsetbits_le32(&denali_pi[131], 0xFFFF << 16, reg_value << 16); |
| clrsetbits_le32(&denali_pi[139], 0xFFFF, reg_value); |
| clrsetbits_le32(&denali_pi[146], 0xFFFF << 16, reg_value << 16); |
| clrsetbits_le32(&denali_pi[154], 0xFFFF, reg_value); |
| break; |
| case 1: |
| clrsetbits_le32(&denali_ctl[138], 0xFFFF << 16, |
| reg_value << 16); |
| clrsetbits_le32(&denali_ctl[152], 0xFFFF << 16, |
| reg_value << 16); |
| |
| clrsetbits_le32(&denali_pi[129], 0xFFFF, reg_value); |
| clrsetbits_le32(&denali_pi[136], 0xFFFF << 16, reg_value << 16); |
| clrsetbits_le32(&denali_pi[144], 0xFFFF, reg_value); |
| clrsetbits_le32(&denali_pi[151], 0xFFFF << 16, reg_value << 16); |
| break; |
| case 2: |
| default: |
| clrsetbits_le32(&denali_ctl[139], 0xFFFF, reg_value); |
| clrsetbits_le32(&denali_ctl[153], 0xFFFF, reg_value); |
| |
| clrsetbits_le32(&denali_pi[126], 0xFFFF << 16, reg_value << 16); |
| clrsetbits_le32(&denali_pi[134], 0xFFFF, reg_value); |
| clrsetbits_le32(&denali_pi[141], 0xFFFF << 16, reg_value << 16); |
| clrsetbits_le32(&denali_pi[149], 0xFFFF, reg_value); |
| break; |
| } |
| } |
| |
| static void set_lpddr4_MR12(const struct chan_info *chan, |
| struct rk3399_sdram_params *params, u32 ctl_fn, |
| bool ctl_phy_reg, u32 mr5) |
| { |
| u32 *denali_ctl = get_denali_ctl(chan, params, ctl_phy_reg); |
| u32 *denali_pi = get_denali_pi(chan, params, ctl_phy_reg); |
| struct io_setting *io; |
| u32 reg_value; |
| |
| io = lpddr4_get_io_settings(params, mr5); |
| |
| reg_value = io->ca_vref; |
| |
| switch (ctl_fn) { |
| case 0: |
| clrsetbits_le32(&denali_ctl[140], 0xFFFF << 16, |
| reg_value << 16); |
| clrsetbits_le32(&denali_ctl[154], 0xFFFF << 16, |
| reg_value << 16); |
| |
| clrsetbits_le32(&denali_pi[132], 0xFF << 8, reg_value << 8); |
| clrsetbits_le32(&denali_pi[139], 0xFF << 24, reg_value << 24); |
| clrsetbits_le32(&denali_pi[147], 0xFF << 8, reg_value << 8); |
| clrsetbits_le32(&denali_pi[154], 0xFF << 24, reg_value << 24); |
| break; |
| case 1: |
| clrsetbits_le32(&denali_ctl[141], 0xFFFF, reg_value); |
| clrsetbits_le32(&denali_ctl[155], 0xFFFF, reg_value); |
| |
| clrsetbits_le32(&denali_pi[129], 0xFF << 24, reg_value << 24); |
| clrsetbits_le32(&denali_pi[137], 0xFF << 8, reg_value << 8); |
| clrsetbits_le32(&denali_pi[144], 0xFF << 24, reg_value << 24); |
| clrsetbits_le32(&denali_pi[152], 0xFF << 8, reg_value << 8); |
| break; |
| case 2: |
| default: |
| clrsetbits_le32(&denali_ctl[141], 0xFFFF << 16, |
| reg_value << 16); |
| clrsetbits_le32(&denali_ctl[155], 0xFFFF << 16, |
| reg_value << 16); |
| |
| clrsetbits_le32(&denali_pi[127], 0xFF << 8, reg_value << 8); |
| clrsetbits_le32(&denali_pi[134], 0xFF << 24, reg_value << 24); |
| clrsetbits_le32(&denali_pi[142], 0xFF << 8, reg_value << 8); |
| clrsetbits_le32(&denali_pi[149], 0xFF << 24, reg_value << 24); |
| break; |
| } |
| } |
| |
| static void set_lpddr4_MR14(const struct chan_info *chan, |
| struct rk3399_sdram_params *params, u32 ctl_fn, |
| bool ctl_phy_reg, u32 mr5) |
| { |
| u32 *denali_ctl = get_denali_ctl(chan, params, ctl_phy_reg); |
| u32 *denali_pi = get_denali_pi(chan, params, ctl_phy_reg); |
| struct io_setting *io; |
| u32 reg_value; |
| |
| io = lpddr4_get_io_settings(params, mr5); |
| |
| reg_value = io->dq_vref; |
| |
| switch (ctl_fn) { |
| case 0: |
| clrsetbits_le32(&denali_ctl[142], 0xFFFF << 16, |
| reg_value << 16); |
| clrsetbits_le32(&denali_ctl[156], 0xFFFF << 16, |
| reg_value << 16); |
| |
| clrsetbits_le32(&denali_pi[132], 0xFF << 16, reg_value << 16); |
| clrsetbits_le32(&denali_pi[140], 0xFF << 0, reg_value << 0); |
| clrsetbits_le32(&denali_pi[147], 0xFF << 16, reg_value << 16); |
| clrsetbits_le32(&denali_pi[155], 0xFF << 0, reg_value << 0); |
| break; |
| case 1: |
| clrsetbits_le32(&denali_ctl[143], 0xFFFF, reg_value); |
| clrsetbits_le32(&denali_ctl[157], 0xFFFF, reg_value); |
| |
| clrsetbits_le32(&denali_pi[130], 0xFF << 0, reg_value << 0); |
| clrsetbits_le32(&denali_pi[137], 0xFF << 16, reg_value << 16); |
| clrsetbits_le32(&denali_pi[145], 0xFF << 0, reg_value << 0); |
| clrsetbits_le32(&denali_pi[152], 0xFF << 16, reg_value << 16); |
| break; |
| case 2: |
| default: |
| clrsetbits_le32(&denali_ctl[143], 0xFFFF << 16, |
| reg_value << 16); |
| clrsetbits_le32(&denali_ctl[157], 0xFFFF << 16, |
| reg_value << 16); |
| |
| clrsetbits_le32(&denali_pi[127], 0xFF << 16, reg_value << 16); |
| clrsetbits_le32(&denali_pi[135], 0xFF << 0, reg_value << 0); |
| clrsetbits_le32(&denali_pi[142], 0xFF << 16, reg_value << 16); |
| clrsetbits_le32(&denali_pi[150], 0xFF << 0, reg_value << 0); |
| break; |
| } |
| } |
| |
| void lpddr4_modify_param(const struct chan_info *chan, |
| struct rk3399_sdram_params *params) |
| { |
| struct rk3399_sdram_params *params_cfg; |
| u32 *denali_ctl_params; |
| u32 *denali_pi_params; |
| u32 *denali_phy_params; |
| |
| denali_ctl_params = params->pctl_regs.denali_ctl; |
| denali_pi_params = params->pi_regs.denali_pi; |
| denali_phy_params = params->phy_regs.denali_phy; |
| |
| set_lpddr4_dq_odt(chan, params, 2, true, false, 0); |
| set_lpddr4_ca_odt(chan, params, 2, true, false, 0); |
| set_lpddr4_MR3(chan, params, 2, false, 0); |
| set_lpddr4_MR12(chan, params, 2, false, 0); |
| set_lpddr4_MR14(chan, params, 2, false, 0); |
| params_cfg = lpddr4_get_phy_index_params(0, params); |
| set_ds_odt(chan, params_cfg, false, 0); |
| /* read two cycle preamble */ |
| clrsetbits_le32(&denali_ctl_params[200], 0x3 << 24, 0x3 << 24); |
| clrsetbits_le32(&denali_phy_params[7], 0x3 << 24, 0x3 << 24); |
| clrsetbits_le32(&denali_phy_params[135], 0x3 << 24, 0x3 << 24); |
| clrsetbits_le32(&denali_phy_params[263], 0x3 << 24, 0x3 << 24); |
| clrsetbits_le32(&denali_phy_params[391], 0x3 << 24, 0x3 << 24); |
| |
| /* boot frequency two cycle preamble */ |
| clrsetbits_le32(&denali_phy_params[2], 0x3 << 16, 0x3 << 16); |
| clrsetbits_le32(&denali_phy_params[130], 0x3 << 16, 0x3 << 16); |
| clrsetbits_le32(&denali_phy_params[258], 0x3 << 16, 0x3 << 16); |
| clrsetbits_le32(&denali_phy_params[386], 0x3 << 16, 0x3 << 16); |
| |
| clrsetbits_le32(&denali_pi_params[45], 0x3 << 8, 0x3 << 8); |
| clrsetbits_le32(&denali_pi_params[58], 0x1, 0x1); |
| |
| /* |
| * bypass mode need PHY_SLICE_PWR_RDC_DISABLE_x = 1, |
| * boot frequency mode use bypass mode |
| */ |
| setbits_le32(&denali_phy_params[10], 1 << 16); |
| setbits_le32(&denali_phy_params[138], 1 << 16); |
| setbits_le32(&denali_phy_params[266], 1 << 16); |
| setbits_le32(&denali_phy_params[394], 1 << 16); |
| |
| clrsetbits_le32(&denali_pi_params[45], 0x1 << 24, 0x1 << 24); |
| clrsetbits_le32(&denali_pi_params[61], 0x1 << 24, 0x1 << 24); |
| clrsetbits_le32(&denali_pi_params[76], 0x1 << 24, 0x1 << 24); |
| clrsetbits_le32(&denali_pi_params[77], 0x1, 0x1); |
| } |
| |
| static void lpddr4_copy_phy(struct dram_info *dram, |
| struct rk3399_sdram_params *params, u32 phy_fn, |
| struct rk3399_sdram_params *params_cfg, |
| u32 channel) |
| { |
| u32 *denali_ctl, *denali_phy; |
| u32 *denali_phy_params; |
| u32 speed = 0; |
| u32 ctl_fn, mr5; |
| |
| denali_ctl = dram->chan[channel].pctl->denali_ctl; |
| denali_phy = dram->chan[channel].publ->denali_phy; |
| denali_phy_params = params_cfg->phy_regs.denali_phy; |
| |
| /* switch index */ |
| clrsetbits_le32(&denali_phy_params[896], 0x3 << 8, |
| phy_fn << 8); |
| writel(denali_phy_params[896], &denali_phy[896]); |
| |
| /* phy_pll_ctrl_ca, phy_pll_ctrl */ |
| writel(denali_phy_params[911], &denali_phy[911]); |
| |
| /* phy_low_freq_sel */ |
| clrsetbits_le32(&denali_phy[913], 0x1, |
| denali_phy_params[913] & 0x1); |
| |
| /* phy_grp_slave_delay_x, phy_cslvl_dly_step */ |
| writel(denali_phy_params[916], &denali_phy[916]); |
| writel(denali_phy_params[917], &denali_phy[917]); |
| writel(denali_phy_params[918], &denali_phy[918]); |
| |
| /* phy_adrz_sw_wraddr_shift_x */ |
| writel(denali_phy_params[512], &denali_phy[512]); |
| clrsetbits_le32(&denali_phy[513], 0xffff, |
| denali_phy_params[513] & 0xffff); |
| writel(denali_phy_params[640], &denali_phy[640]); |
| clrsetbits_le32(&denali_phy[641], 0xffff, |
| denali_phy_params[641] & 0xffff); |
| writel(denali_phy_params[768], &denali_phy[768]); |
| clrsetbits_le32(&denali_phy[769], 0xffff, |
| denali_phy_params[769] & 0xffff); |
| |
| writel(denali_phy_params[544], &denali_phy[544]); |
| writel(denali_phy_params[545], &denali_phy[545]); |
| writel(denali_phy_params[546], &denali_phy[546]); |
| writel(denali_phy_params[547], &denali_phy[547]); |
| |
| writel(denali_phy_params[672], &denali_phy[672]); |
| writel(denali_phy_params[673], &denali_phy[673]); |
| writel(denali_phy_params[674], &denali_phy[674]); |
| writel(denali_phy_params[675], &denali_phy[675]); |
| |
| writel(denali_phy_params[800], &denali_phy[800]); |
| writel(denali_phy_params[801], &denali_phy[801]); |
| writel(denali_phy_params[802], &denali_phy[802]); |
| writel(denali_phy_params[803], &denali_phy[803]); |
| |
| /* |
| * phy_adr_master_delay_start_x |
| * phy_adr_master_delay_step_x |
| * phy_adr_master_delay_wait_x |
| */ |
| writel(denali_phy_params[548], &denali_phy[548]); |
| writel(denali_phy_params[676], &denali_phy[676]); |
| writel(denali_phy_params[804], &denali_phy[804]); |
| |
| /* phy_adr_calvl_dly_step_x */ |
| writel(denali_phy_params[549], &denali_phy[549]); |
| writel(denali_phy_params[677], &denali_phy[677]); |
| writel(denali_phy_params[805], &denali_phy[805]); |
| |
| /* |
| * phy_clk_wrdm_slave_delay_x |
| * phy_clk_wrdqz_slave_delay_x |
| * phy_clk_wrdqs_slave_delay_x |
| */ |
| sdram_copy_to_reg((u32 *)&denali_phy[59], |
| (u32 *)&denali_phy_params[59], (63 - 58) * 4); |
| sdram_copy_to_reg((u32 *)&denali_phy[187], |
| (u32 *)&denali_phy_params[187], (191 - 186) * 4); |
| sdram_copy_to_reg((u32 *)&denali_phy[315], |
| (u32 *)&denali_phy_params[315], (319 - 314) * 4); |
| sdram_copy_to_reg((u32 *)&denali_phy[443], |
| (u32 *)&denali_phy_params[443], (447 - 442) * 4); |
| |
| /* |
| * phy_dqs_tsel_wr_timing_x 8bits denali_phy_84/212/340/468 offset_8 |
| * dqs_tsel_wr_end[7:4] add half cycle |
| * phy_dq_tsel_wr_timing_x 8bits denali_phy_83/211/339/467 offset_8 |
| * dq_tsel_wr_end[7:4] add half cycle |
| */ |
| writel(denali_phy_params[83] + (0x10 << 16), &denali_phy[83]); |
| writel(denali_phy_params[84] + (0x10 << 8), &denali_phy[84]); |
| writel(denali_phy_params[85], &denali_phy[85]); |
| |
| writel(denali_phy_params[211] + (0x10 << 16), &denali_phy[211]); |
| writel(denali_phy_params[212] + (0x10 << 8), &denali_phy[212]); |
| writel(denali_phy_params[213], &denali_phy[213]); |
| |
| writel(denali_phy_params[339] + (0x10 << 16), &denali_phy[339]); |
| writel(denali_phy_params[340] + (0x10 << 8), &denali_phy[340]); |
| writel(denali_phy_params[341], &denali_phy[341]); |
| |
| writel(denali_phy_params[467] + (0x10 << 16), &denali_phy[467]); |
| writel(denali_phy_params[468] + (0x10 << 8), &denali_phy[468]); |
| writel(denali_phy_params[469], &denali_phy[469]); |
| |
| /* |
| * phy_gtlvl_resp_wait_cnt_x |
| * phy_gtlvl_dly_step_x |
| * phy_wrlvl_resp_wait_cnt_x |
| * phy_gtlvl_final_step_x |
| * phy_gtlvl_back_step_x |
| * phy_rdlvl_dly_step_x |
| * |
| * phy_master_delay_step_x |
| * phy_master_delay_wait_x |
| * phy_wrlvl_dly_step_x |
| * phy_rptr_update_x |
| * phy_wdqlvl_dly_step_x |
| */ |
| writel(denali_phy_params[87], &denali_phy[87]); |
| writel(denali_phy_params[88], &denali_phy[88]); |
| writel(denali_phy_params[89], &denali_phy[89]); |
| writel(denali_phy_params[90], &denali_phy[90]); |
| |
| writel(denali_phy_params[215], &denali_phy[215]); |
| writel(denali_phy_params[216], &denali_phy[216]); |
| writel(denali_phy_params[217], &denali_phy[217]); |
| writel(denali_phy_params[218], &denali_phy[218]); |
| |
| writel(denali_phy_params[343], &denali_phy[343]); |
| writel(denali_phy_params[344], &denali_phy[344]); |
| writel(denali_phy_params[345], &denali_phy[345]); |
| writel(denali_phy_params[346], &denali_phy[346]); |
| |
| writel(denali_phy_params[471], &denali_phy[471]); |
| writel(denali_phy_params[472], &denali_phy[472]); |
| writel(denali_phy_params[473], &denali_phy[473]); |
| writel(denali_phy_params[474], &denali_phy[474]); |
| |
| /* |
| * phy_gtlvl_lat_adj_start_x |
| * phy_gtlvl_rddqs_slv_dly_start_x |
| * phy_rdlvl_rddqs_dq_slv_dly_start_x |
| * phy_wdqlvl_dqdm_slv_dly_start_x |
| */ |
| writel(denali_phy_params[80], &denali_phy[80]); |
| writel(denali_phy_params[81], &denali_phy[81]); |
| |
| writel(denali_phy_params[208], &denali_phy[208]); |
| writel(denali_phy_params[209], &denali_phy[209]); |
| |
| writel(denali_phy_params[336], &denali_phy[336]); |
| writel(denali_phy_params[337], &denali_phy[337]); |
| |
| writel(denali_phy_params[464], &denali_phy[464]); |
| writel(denali_phy_params[465], &denali_phy[465]); |
| |
| /* |
| * phy_master_delay_start_x |
| * phy_sw_master_mode_x |
| * phy_rddata_en_tsel_dly_x |
| */ |
| writel(denali_phy_params[86], &denali_phy[86]); |
| writel(denali_phy_params[214], &denali_phy[214]); |
| writel(denali_phy_params[342], &denali_phy[342]); |
| writel(denali_phy_params[470], &denali_phy[470]); |
| |
| /* |
| * phy_rddqz_slave_delay_x |
| * phy_rddqs_dqz_fall_slave_delay_x |
| * phy_rddqs_dqz_rise_slave_delay_x |
| * phy_rddqs_dm_fall_slave_delay_x |
| * phy_rddqs_dm_rise_slave_delay_x |
| * phy_rddqs_gate_slave_delay_x |
| * phy_wrlvl_delay_early_threshold_x |
| * phy_write_path_lat_add_x |
| * phy_rddqs_latency_adjust_x |
| * phy_wrlvl_delay_period_threshold_x |
| * phy_wrlvl_early_force_zero_x |
| */ |
| sdram_copy_to_reg((u32 *)&denali_phy[64], |
| (u32 *)&denali_phy_params[64], (67 - 63) * 4); |
| clrsetbits_le32(&denali_phy[68], 0xfffffc00, |
| denali_phy_params[68] & 0xfffffc00); |
| sdram_copy_to_reg((u32 *)&denali_phy[69], |
| (u32 *)&denali_phy_params[69], (79 - 68) * 4); |
| sdram_copy_to_reg((u32 *)&denali_phy[192], |
| (u32 *)&denali_phy_params[192], (195 - 191) * 4); |
| clrsetbits_le32(&denali_phy[196], 0xfffffc00, |
| denali_phy_params[196] & 0xfffffc00); |
| sdram_copy_to_reg((u32 *)&denali_phy[197], |
| (u32 *)&denali_phy_params[197], (207 - 196) * 4); |
| sdram_copy_to_reg((u32 *)&denali_phy[320], |
| (u32 *)&denali_phy_params[320], (323 - 319) * 4); |
| clrsetbits_le32(&denali_phy[324], 0xfffffc00, |
| denali_phy_params[324] & 0xfffffc00); |
| sdram_copy_to_reg((u32 *)&denali_phy[325], |
| (u32 *)&denali_phy_params[325], (335 - 324) * 4); |
| sdram_copy_to_reg((u32 *)&denali_phy[448], |
| (u32 *)&denali_phy_params[448], (451 - 447) * 4); |
| clrsetbits_le32(&denali_phy[452], 0xfffffc00, |
| denali_phy_params[452] & 0xfffffc00); |
| sdram_copy_to_reg((u32 *)&denali_phy[453], |
| (u32 *)&denali_phy_params[453], (463 - 452) * 4); |
| |
| /* phy_two_cyc_preamble_x */ |
| clrsetbits_le32(&denali_phy[7], 0x3 << 24, |
| denali_phy_params[7] & (0x3 << 24)); |
| clrsetbits_le32(&denali_phy[135], 0x3 << 24, |
| denali_phy_params[135] & (0x3 << 24)); |
| clrsetbits_le32(&denali_phy[263], 0x3 << 24, |
| denali_phy_params[263] & (0x3 << 24)); |
| clrsetbits_le32(&denali_phy[391], 0x3 << 24, |
| denali_phy_params[391] & (0x3 << 24)); |
| |
| /* speed */ |
| if (params_cfg->base.ddr_freq < 400) |
| speed = 0x0; |
| else if (params_cfg->base.ddr_freq < 800) |
| speed = 0x1; |
| else if (params_cfg->base.ddr_freq < 1200) |
| speed = 0x2; |
| |
| /* phy_924 phy_pad_fdbk_drive */ |
| clrsetbits_le32(&denali_phy[924], 0x3 << 21, speed << 21); |
| /* phy_926 phy_pad_data_drive */ |
| clrsetbits_le32(&denali_phy[926], 0x3 << 9, speed << 9); |
| /* phy_927 phy_pad_dqs_drive */ |
| clrsetbits_le32(&denali_phy[927], 0x3 << 9, speed << 9); |
| /* phy_928 phy_pad_addr_drive */ |
| clrsetbits_le32(&denali_phy[928], 0x3 << 17, speed << 17); |
| /* phy_929 phy_pad_clk_drive */ |
| clrsetbits_le32(&denali_phy[929], 0x3 << 17, speed << 17); |
| /* phy_935 phy_pad_cke_drive */ |
| clrsetbits_le32(&denali_phy[935], 0x3 << 17, speed << 17); |
| /* phy_937 phy_pad_rst_drive */ |
| clrsetbits_le32(&denali_phy[937], 0x3 << 17, speed << 17); |
| /* phy_939 phy_pad_cs_drive */ |
| clrsetbits_le32(&denali_phy[939], 0x3 << 17, speed << 17); |
| |
| if (params_cfg->base.dramtype == LPDDR4) { |
| read_mr(dram->chan[channel].pctl, 1, 5, &mr5); |
| set_ds_odt(&dram->chan[channel], params_cfg, true, mr5); |
| |
| ctl_fn = lpddr4_get_ctl_fn(params_cfg, phy_fn); |
| set_lpddr4_dq_odt(&dram->chan[channel], params_cfg, |
| ctl_fn, true, true, mr5); |
| set_lpddr4_ca_odt(&dram->chan[channel], params_cfg, |
| ctl_fn, true, true, mr5); |
| set_lpddr4_MR3(&dram->chan[channel], params_cfg, |
| ctl_fn, true, mr5); |
| set_lpddr4_MR12(&dram->chan[channel], params_cfg, |
| ctl_fn, true, mr5); |
| set_lpddr4_MR14(&dram->chan[channel], params_cfg, |
| ctl_fn, true, mr5); |
| |
| /* |
| * if phy_sw_master_mode_x not bypass mode, |
| * clear phy_slice_pwr_rdc_disable. |
| * note: need use timings, not ddr_publ_regs |
| */ |
| if (!((denali_phy_params[86] >> 8) & (1 << 2))) { |
| clrbits_le32(&denali_phy[10], 1 << 16); |
| clrbits_le32(&denali_phy[138], 1 << 16); |
| clrbits_le32(&denali_phy[266], 1 << 16); |
| clrbits_le32(&denali_phy[394], 1 << 16); |
| } |
| |
| /* |
| * when PHY_PER_CS_TRAINING_EN=1, W2W_DIFFCS_DLY_Fx can't |
| * smaller than 8 |
| * NOTE: need use timings, not ddr_publ_regs |
| */ |
| if ((denali_phy_params[84] >> 16) & 1) { |
| if (((readl(&denali_ctl[217 + ctl_fn]) >> |
| 16) & 0x1f) < 8) |
| clrsetbits_le32(&denali_ctl[217 + ctl_fn], |
| 0x1f << 16, |
| 8 << 16); |
| } |
| } |
| } |
| |
| static void lpddr4_set_phy(struct dram_info *dram, |
| struct rk3399_sdram_params *params, u32 phy_fn, |
| struct rk3399_sdram_params *params_cfg) |
| { |
| u32 channel; |
| |
| for (channel = 0; channel < 2; channel++) |
| lpddr4_copy_phy(dram, params, phy_fn, params_cfg, |
| channel); |
| } |
| |
| static int lpddr4_set_ctl(struct dram_info *dram, |
| struct rk3399_sdram_params *params, |
| u32 fn, u32 hz) |
| { |
| u32 channel; |
| int ret_clk, ret; |
| |
| /* cci idle req stall */ |
| writel(0x70007, &dram->grf->soc_con0); |
| |
| /* enable all clk */ |
| setbits_le32(&dram->pmu->pmu_noc_auto_ena, (0x3 << 7)); |
| |
| /* idle */ |
| setbits_le32(&dram->pmu->pmu_bus_idle_req, (0x3 << 18)); |
| while ((readl(&dram->pmu->pmu_bus_idle_st) & (0x3 << 18)) |
| != (0x3 << 18)) |
| ; |
| |
| /* change freq */ |
| writel((((0x3 << 4) | (1 << 2) | 1) << 16) | |
| (fn << 4) | (1 << 2) | 1, &dram->cic->cic_ctrl0); |
| while (!(readl(&dram->cic->cic_status0) & (1 << 2))) |
| ; |
| |
| ret_clk = clk_set_rate(&dram->ddr_clk, hz); |
| if (ret_clk < 0) { |
| printf("%s clk set failed %d\n", __func__, ret_clk); |
| return ret_clk; |
| } |
| |
| writel(0x20002, &dram->cic->cic_ctrl0); |
| while (!(readl(&dram->cic->cic_status0) & (1 << 0))) |
| ; |
| |
| /* deidle */ |
| clrbits_le32(&dram->pmu->pmu_bus_idle_req, (0x3 << 18)); |
| while (readl(&dram->pmu->pmu_bus_idle_st) & (0x3 << 18)) |
| ; |
| |
| /* clear enable all clk */ |
| clrbits_le32(&dram->pmu->pmu_noc_auto_ena, (0x3 << 7)); |
| |
| /* lpddr4 ctl2 can not do training, all training will fail */ |
| if (!(params->base.dramtype == LPDDR4 && fn == 2)) { |
| for (channel = 0; channel < 2; channel++) { |
| if (!(params->ch[channel].cap_info.col)) |
| continue; |
| ret = data_training(dram, channel, params, |
| PI_FULL_TRAINING); |
| if (ret) |
| printf("%s: channel %d training failed!\n", |
| __func__, channel); |
| else |
| debug("%s: channel %d training pass\n", |
| __func__, channel); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int lpddr4_set_rate(struct dram_info *dram, |
| struct rk3399_sdram_params *params) |
| { |
| u32 ctl_fn; |
| u32 phy_fn; |
| |
| for (ctl_fn = 0; ctl_fn < 2; ctl_fn++) { |
| phy_fn = lpddr4_get_phy_fn(params, ctl_fn); |
| |
| lpddr4_set_phy(dram, params, phy_fn, &dfs_cfgs_lpddr4[ctl_fn]); |
| lpddr4_set_ctl(dram, params, ctl_fn, |
| dfs_cfgs_lpddr4[ctl_fn].base.ddr_freq); |
| |
| printf("%s: change freq to %d mhz %d, %d\n", __func__, |
| dfs_cfgs_lpddr4[ctl_fn].base.ddr_freq, ctl_fn, phy_fn); |
| } |
| |
| return 0; |
| } |
| #endif /* CONFIG_RAM_RK3399_LPDDR4 */ |
| |
| /* CS0,n=1 |
| * CS1,n=2 |
| * CS0 & CS1, n=3 |
| * cs0_cap: MB unit |
| */ |
| static void dram_set_cs(const struct chan_info *chan, u32 cs_map, u32 cs0_cap, |
| unsigned char dramtype) |
| { |
| u32 *denali_ctl = chan->pctl->denali_ctl; |
| u32 *denali_pi = chan->pi->denali_pi; |
| struct msch_regs *ddr_msch_regs = chan->msch; |
| |
| clrsetbits_le32(&denali_ctl[196], 0x3, cs_map); |
| writel((cs0_cap / 32) | (((4096 - cs0_cap) / 32) << 8), |
| &ddr_msch_regs->ddrsize); |
| if (dramtype == LPDDR4) { |
| if (cs_map == 1) |
| cs_map = 0x5; |
| else if (cs_map == 2) |
| cs_map = 0xa; |
| else |
| cs_map = 0xF; |
| } |
| /*PI_41 PI_CS_MAP:RW:24:4*/ |
| clrsetbits_le32(&denali_pi[41], |
| 0xf << 24, cs_map << 24); |
| if (cs_map == 1 && dramtype == DDR3) |
| writel(0x2EC7FFFF, &denali_pi[34]); |
| } |
| |
| static void dram_set_bw(const struct chan_info *chan, u32 bw) |
| { |
| u32 *denali_ctl = chan->pctl->denali_ctl; |
| |
| if (bw == 2) |
| clrbits_le32(&denali_ctl[196], 1 << 16); |
| else |
| setbits_le32(&denali_ctl[196], 1 << 16); |
| } |
| |
| static void dram_set_max_col(const struct chan_info *chan, u32 bw, u32 *pcol) |
| { |
| u32 *denali_ctl = chan->pctl->denali_ctl; |
| struct msch_regs *ddr_msch_regs = chan->msch; |
| u32 *denali_pi = chan->pi->denali_pi; |
| u32 ddrconfig; |
| |
| clrbits_le32(&denali_ctl[191], 0xf); |
| clrsetbits_le32(&denali_ctl[190], |
| (7 << 24), |
| ((16 - ((bw == 2) ? 14 : 15)) << 24)); |
| /*PI_199 PI_COL_DIFF:RW:0:4*/ |
| clrbits_le32(&denali_pi[199], 0xf); |
| /*PI_155 PI_ROW_DIFF:RW:24:3*/ |
| clrsetbits_le32(&denali_pi[155], |
| (7 << 24), |
| ((16 - 12) << 24)); |
| ddrconfig = (bw == 2) ? 3 : 2; |
| writel(ddrconfig | (ddrconfig << 8), &ddr_msch_regs->ddrconf); |
| /* set max cs0 size */ |
| writel((4096 / 32) | ((0 / 32) << 8), |
| &ddr_msch_regs->ddrsize); |
| |
| *pcol = 12; |
| } |
| |
| static void dram_set_max_bank(const struct chan_info *chan, u32 bw, u32 *pbank, |
| u32 *pcol) |
| { |
| u32 *denali_ctl = chan->pctl->denali_ctl; |
| u32 *denali_pi = chan->pi->denali_pi; |
| |
| clrbits_le32(&denali_ctl[191], 0xf); |
| clrbits_le32(&denali_ctl[190], (3 << 16)); |
| /*PI_199 PI_COL_DIFF:RW:0:4*/ |
| clrbits_le32(&denali_pi[199], 0xf); |
| /*PI_155 PI_BANK_DIFF:RW:16:2*/ |
| clrbits_le32(&denali_pi[155], (3 << 16)); |
| |
| *pbank = 3; |
| *pcol = 12; |
| } |
| |
| static void dram_set_max_row(const struct chan_info *chan, u32 bw, u32 *prow, |
| u32 *pbank, u32 *pcol) |
| { |
| u32 *denali_ctl = chan->pctl->denali_ctl; |
| u32 *denali_pi = chan->pi->denali_pi; |
| struct msch_regs *ddr_msch_regs = chan->msch; |
| |
| clrsetbits_le32(&denali_ctl[191], 0xf, 12 - 10); |
| clrbits_le32(&denali_ctl[190], |
| (0x3 << 16) | (0x7 << 24)); |
| /*PI_199 PI_COL_DIFF:RW:0:4*/ |
| clrsetbits_le32(&denali_pi[199], 0xf, 12 - 10); |
| /*PI_155 PI_ROW_DIFF:RW:24:3 PI_BANK_DIFF:RW:16:2*/ |
| clrbits_le32(&denali_pi[155], |
| (0x3 << 16) | (0x7 << 24)); |
| writel(1 | (1 << 8), &ddr_msch_regs->ddrconf); |
| /* set max cs0 size */ |
| writel((4096 / 32) | ((0 / 32) << 8), |
| &ddr_msch_regs->ddrsize); |
| |
| *prow = 16; |
| *pbank = 3; |
| *pcol = (bw == 2) ? 10 : 11; |
| } |
| |
| static u64 dram_detect_cap(struct dram_info *dram, |
| struct rk3399_sdram_params *params, |
| unsigned char channel) |
| { |
| const struct chan_info *chan = &dram->chan[channel]; |
| struct sdram_cap_info *cap_info = ¶ms->ch[channel].cap_info; |
| u32 bw; |
| u32 col_tmp; |
| u32 bk_tmp; |
| u32 row_tmp; |
| u32 cs0_cap; |
| u32 training_flag; |
| u32 ddrconfig; |
| |
| /* detect bw */ |
| bw = 2; |
| if (params->base.dramtype != LPDDR4) { |
| dram_set_bw(chan, bw); |
| cap_info->bw = bw; |
| if (data_training(dram, channel, params, |
| PI_READ_GATE_TRAINING)) { |
| bw = 1; |
| dram_set_bw(chan, 1); |
| cap_info->bw = bw; |
| if (data_training(dram, channel, params, |
| PI_READ_GATE_TRAINING)) { |
| printf("16bit error!!!\n"); |
| goto error; |
| } |
| } |
| } |
| /* |
| * LPDDR3 CA training msut be trigger before other training. |
| * DDR3 is not have CA training. |
| */ |
| if (params->base.dramtype == LPDDR3) |
| training_flag = PI_WRITE_LEVELING; |
| else |
| training_flag = PI_FULL_TRAINING; |
| |
| if (params->base.dramtype != LPDDR4) { |
| if (data_training(dram, channel, params, training_flag)) { |
| printf("full training error!!!\n"); |
| goto error; |
| } |
| } |
| |
| /* detect col */ |
| dram_set_max_col(chan, bw, &col_tmp); |
| if (sdram_detect_col(cap_info, col_tmp) != 0) |
| goto error; |
| |
| /* detect bank */ |
| dram_set_max_bank(chan, bw, &bk_tmp, &col_tmp); |
| sdram_detect_bank(cap_info, col_tmp, bk_tmp); |
| |
| /* detect row */ |
| dram_set_max_row(chan, bw, &row_tmp, &bk_tmp, &col_tmp); |
| if (sdram_detect_row(cap_info, col_tmp, bk_tmp, row_tmp) != 0) |
| goto error; |
| |
| /* detect row_3_4 */ |
| sdram_detect_row_3_4(cap_info, col_tmp, bk_tmp); |
| |
| /* set ddrconfig */ |
| cs0_cap = (1 << (cap_info->cs0_row + cap_info->col + cap_info->bk + |
| cap_info->bw - 20)); |
| if (cap_info->row_3_4) |
| cs0_cap = cs0_cap * 3 / 4; |
| |
| cap_info->cs1_row = cap_info->cs0_row; |
| set_memory_map(chan, channel, params); |
| ddrconfig = calculate_ddrconfig(params, channel); |
| if (-1 == ddrconfig) |
| goto error; |
| set_ddrconfig(chan, params, channel, |
| cap_info->ddrconfig); |
| |
| /* detect cs1 row */ |
| sdram_detect_cs1_row(cap_info, params->base.dramtype); |
| |
| /* detect die bw */ |
| sdram_detect_dbw(cap_info, params->base.dramtype); |
| |
| return 0; |
| error: |
| return (-1); |
| } |
| |
| static unsigned char calculate_stride(struct rk3399_sdram_params *params) |
| { |
| unsigned int gstride_type; |
| unsigned int channel; |
| unsigned int chinfo = 0; |
| unsigned int cap = 0; |
| unsigned int stride = -1; |
| unsigned int ch_cap[2] = {0, 0}; |
| |
| gstride_type = STRIDE_256B; |
| |
| for (channel = 0; channel < 2; channel++) { |
| unsigned int cs0_cap = 0; |
| unsigned int cs1_cap = 0; |
| struct sdram_cap_info *cap_info = |
| ¶ms->ch[channel].cap_info; |
| |
| if (cap_info->col == 0) |
| continue; |
| |
| cs0_cap = (1 << (cap_info->cs0_row + cap_info->col + |
| cap_info->bk + cap_info->bw - 20)); |
| if (cap_info->rank > 1) |
| cs1_cap = cs0_cap >> (cap_info->cs0_row |
| - cap_info->cs1_row); |
| if (cap_info->row_3_4) { |
| cs0_cap = cs0_cap * 3 / 4; |
| cs1_cap = cs1_cap * 3 / 4; |
| } |
| ch_cap[channel] = cs0_cap + cs1_cap; |
| chinfo |= 1 << channel; |
| } |
| |
| cap = ch_cap[0] + ch_cap[1]; |
| if (params->base.num_channels == 1) { |
| if (chinfo & 1) /* channel a only */ |
| stride = 0x17; |
| else /* channel b only */ |
| stride = 0x18; |
| } else {/* 2 channel */ |
| if (ch_cap[0] == ch_cap[1]) { |
| /* interleaved */ |
| if (gstride_type == PART_STRIDE) { |
| /* |
| * first 64MB no interleaved other 256B interleaved |
| * if 786M+768M.useful space from 0-1280MB and |
| * 1536MB-1792MB |
| * if 1.5G+1.5G(continuous).useful space from 0-2560MB |
| * and 3072MB-3584MB |
| */ |
| stride = 0x1F; |
| } else { |
| switch (cap) { |
| /* 512MB */ |
| case 512: |
| stride = 0; |
| break; |
| /* 1GB unstride or 256B stride*/ |
| case 1024: |
| stride = (gstride_type == UN_STRIDE) ? |
| 0x1 : 0x5; |
| break; |
| /* |
| * 768MB + 768MB same as total 2GB memory |
| * useful space: 0-768MB 1GB-1792MB |
| */ |
| case 1536: |
| /* 2GB unstride or 256B or 512B stride */ |
| case 2048: |
| stride = (gstride_type == UN_STRIDE) ? |
| 0x2 : |
| ((gstride_type == STRIDE_512B) ? |
| 0xA : 0x9); |
| break; |
| /* 1536MB + 1536MB */ |
| case 3072: |
| stride = (gstride_type == UN_STRIDE) ? |
| 0x3 : |
| ((gstride_type == STRIDE_512B) ? |
| 0x12 : 0x11); |
| break; |
| /* 4GB unstride or 128B,256B,512B,4KB stride */ |
| case 4096: |
| stride = (gstride_type == UN_STRIDE) ? |
| 0x3 : (0xC + gstride_type); |
| break; |
| } |
| } |
| } |
| if (ch_cap[0] == 2048 && ch_cap[1] == 1024) { |
| /* 2GB + 1GB */ |
| stride = (gstride_type == UN_STRIDE) ? 0x3 : 0x19; |
| } |
| /* |
| * remain two channel capability not equal OR capability |
| * power function of 2 |
| */ |
| if (stride == (-1)) { |
| switch ((ch_cap[0] > ch_cap[1]) ? |
| ch_cap[0] : ch_cap[1]) { |
| case 256: /* 256MB + 128MB */ |
| stride = 0; |
| break; |
| case 512: /* 512MB + 256MB */ |
| stride = 1; |
| break; |
| case 1024:/* 1GB + 128MB/256MB/384MB/512MB/768MB */ |
| stride = 2; |
| break; |
| case 2048: /* 2GB + 128MB/256MB/384MB/512MB/768MB/1GB */ |
| stride = 3; |
| break; |
| default: |
| break; |
| } |
| } |
| if (stride == (-1)) |
| goto error; |
| } |
| switch (stride) { |
| case 0xc: |
| printf("128B stride\n"); |
| break; |
| case 5: |
| case 9: |
| case 0xd: |
| case 0x11: |
| case 0x19: |
| printf("256B stride\n"); |
| break; |
| case 0xa: |
| case 0xe: |
| case 0x12: |
| printf("512B stride\n"); |
| break; |
| case 0xf: |
| printf("4K stride\n"); |
| break; |
| case 0x1f: |
| printf("32MB + 256B stride\n"); |
| break; |
| default: |
| printf("no stride\n"); |
| } |
| |
| sdram_print_stride(stride); |
| |
| return stride; |
| error: |
| printf("Cap not support!\n"); |
| return (-1); |
| } |
| |
| static void clear_channel_params(struct rk3399_sdram_params *params, u8 channel) |
| { |
| params->ch[channel].cap_info.rank = 0; |
| params->ch[channel].cap_info.col = 0; |
| params->ch[channel].cap_info.bk = 0; |
| params->ch[channel].cap_info.bw = 32; |
| params->ch[channel].cap_info.dbw = 32; |
| params->ch[channel].cap_info.row_3_4 = 0; |
| params->ch[channel].cap_info.cs0_row = 0; |
| params->ch[channel].cap_info.cs1_row = 0; |
| params->ch[channel].cap_info.ddrconfig = 0; |
| } |
| |
| static int sdram_init(struct dram_info *dram, |
| struct rk3399_sdram_params *params) |
| { |
| unsigned char dramtype = params->base.dramtype; |
| unsigned int ddr_freq = params->base.ddr_freq; |
| int channel, ch, rank; |
| u32 tmp, ret; |
| |
| debug("Starting SDRAM initialization...\n"); |
| |
| if ((dramtype == DDR3 && ddr_freq > 933) || |
| (dramtype == LPDDR3 && ddr_freq > 933) || |
| (dramtype == LPDDR4 && ddr_freq > 800)) { |
| debug("SDRAM frequency is to high!"); |
| return -E2BIG; |
| } |
| |
| /* detect rank */ |
| for (ch = 0; ch < 2; ch++) { |
| params->ch[ch].cap_info.rank = 2; |
| for (rank = 2; rank != 0; rank--) { |
| for (channel = 0; channel < 2; channel++) { |
| const struct chan_info *chan = |
| &dram->chan[channel]; |
| struct rockchip_cru *cru = dram->cru; |
| struct rk3399_ddr_publ_regs *publ = chan->publ; |
| |
| phy_pctrl_reset(cru, channel); |
| phy_dll_bypass_set(publ, ddr_freq); |
| pctl_cfg(dram, chan, channel, params); |
| } |
| |
| /* start to trigger initialization */ |
| pctl_start(dram, params, 3); |
| |
| /* LPDDR2/LPDDR3 need to wait DAI complete, max 10us */ |
| if (dramtype == LPDDR3) |
| udelay(10); |
| |
| tmp = (rank == 2) ? 3 : 1; |
| dram_set_cs(&dram->chan[ch], tmp, 2048, |
| params->base.dramtype); |
| params->ch[ch].cap_info.rank = rank; |
| |
| ret = dram->ops->data_training_first(dram, ch, |
| rank, params); |
| if (!ret) { |
| debug("%s: data trained for rank %d, ch %d\n", |
| __func__, rank, ch); |
| break; |
| } |
| } |
| /* Computed rank with associated channel number */ |
| params->ch[ch].cap_info.rank = rank; |
| } |
| |
| params->base.num_channels = 0; |
| for (channel = 0; channel < 2; channel++) { |
| const struct chan_info *chan = &dram->chan[channel]; |
| struct sdram_cap_info *cap_info = |
| ¶ms->ch[channel].cap_info; |
| |
| if (cap_info->rank == 0) { |
| clear_channel_params(params, 1); |
| continue; |
| } else { |
| params->base.num_channels++; |
| } |
| |
| printf("Channel "); |
| printf(channel ? "1: " : "0: "); |
| |
| if (channel == 0) |
| set_ddr_stride(dram->pmusgrf, 0x17); |
| else |
| set_ddr_stride(dram->pmusgrf, 0x18); |
| |
| if (dram_detect_cap(dram, params, channel)) { |
| printf("Cap error!\n"); |
| continue; |
| } |
| |
| sdram_print_ddr_info(cap_info, ¶ms->base); |
| set_memory_map(chan, channel, params); |
| cap_info->ddrconfig = |
| calculate_ddrconfig(params, channel); |
| if (-1 == cap_info->ddrconfig) { |
| printf("no ddrconfig find, Cap not support!\n"); |
| continue; |
| } |
| set_ddrconfig(chan, params, channel, cap_info->ddrconfig); |
| set_cap_relate_config(chan, params, channel); |
| } |
| |
| if (params->base.num_channels == 0) { |
| printf("%s: ", __func__); |
| sdram_print_dram_type(params->base.dramtype); |
| printf(" - %dMHz failed!\n", params->base.ddr_freq); |
| return -EINVAL; |
| } |
| |
| params->base.stride = calculate_stride(params); |
| dram_all_config(dram, params); |
| |
| dram->ops->set_rate_index(dram, params); |
| |
| debug("Finish SDRAM initialization...\n"); |
| return 0; |
| } |
| |
| static int rk3399_dmc_ofdata_to_platdata(struct udevice *dev) |
| { |
| #if !CONFIG_IS_ENABLED(OF_PLATDATA) |
| struct rockchip_dmc_plat *plat = dev_get_platdata(dev); |
| int ret; |
| |
| ret = dev_read_u32_array(dev, "rockchip,sdram-params", |
| (u32 *)&plat->sdram_params, |
| sizeof(plat->sdram_params) / sizeof(u32)); |
| if (ret) { |
| printf("%s: Cannot read rockchip,sdram-params %d\n", |
| __func__, ret); |
| return ret; |
| } |
| ret = regmap_init_mem(dev_ofnode(dev), &plat->map); |
| if (ret) |
| printf("%s: regmap failed %d\n", __func__, ret); |
| |
| #endif |
| return 0; |
| } |
| |
| #if CONFIG_IS_ENABLED(OF_PLATDATA) |
| static int conv_of_platdata(struct udevice *dev) |
| { |
| struct rockchip_dmc_plat *plat = dev_get_platdata(dev); |
| struct dtd_rockchip_rk3399_dmc *dtplat = &plat->dtplat; |
| int ret; |
| |
| ret = regmap_init_mem_platdata(dev, dtplat->reg, |
| ARRAY_SIZE(dtplat->reg) / 2, |
| &plat->map); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| #endif |
| |
| static const struct sdram_rk3399_ops rk3399_ops = { |
| #if !defined(CONFIG_RAM_RK3399_LPDDR4) |
| .data_training_first = data_training_first, |
| .set_rate_index = switch_to_phy_index1, |
| .modify_param = modify_param, |
| .get_phy_index_params = get_phy_index_params, |
| #else |
| .data_training_first = lpddr4_mr_detect, |
| .set_rate_index = lpddr4_set_rate, |
| .modify_param = lpddr4_modify_param, |
| .get_phy_index_params = lpddr4_get_phy_index_params, |
| #endif |
| }; |
| |
| static int rk3399_dmc_init(struct udevice *dev) |
| { |
| struct dram_info *priv = dev_get_priv(dev); |
| struct rockchip_dmc_plat *plat = dev_get_platdata(dev); |
| int ret; |
| #if !CONFIG_IS_ENABLED(OF_PLATDATA) |
| struct rk3399_sdram_params *params = &plat->sdram_params; |
| #else |
| struct dtd_rockchip_rk3399_dmc *dtplat = &plat->dtplat; |
| struct rk3399_sdram_params *params = |
| (void *)dtplat->rockchip_sdram_params; |
| |
| ret = conv_of_platdata(dev); |
| if (ret) |
| return ret; |
| #endif |
| |
| priv->ops = &rk3399_ops; |
| priv->cic = syscon_get_first_range(ROCKCHIP_SYSCON_CIC); |
| priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); |
| priv->pmu = syscon_get_first_range(ROCKCHIP_SYSCON_PMU); |
| priv->pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF); |
| priv->pmusgrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUSGRF); |
| priv->pmucru = rockchip_get_pmucru(); |
| priv->cru = rockchip_get_cru(); |
| priv->chan[0].pctl = regmap_get_range(plat->map, 0); |
| priv->chan[0].pi = regmap_get_range(plat->map, 1); |
| priv->chan[0].publ = regmap_get_range(plat->map, 2); |
| priv->chan[0].msch = regmap_get_range(plat->map, 3); |
| priv->chan[1].pctl = regmap_get_range(plat->map, 4); |
| priv->chan[1].pi = regmap_get_range(plat->map, 5); |
| priv->chan[1].publ = regmap_get_range(plat->map, 6); |
| priv->chan[1].msch = regmap_get_range(plat->map, 7); |
| |
| debug("con reg %p %p %p %p %p %p %p %p\n", |
| priv->chan[0].pctl, priv->chan[0].pi, |
| priv->chan[0].publ, priv->chan[0].msch, |
| priv->chan[1].pctl, priv->chan[1].pi, |
| priv->chan[1].publ, priv->chan[1].msch); |
| debug("cru %p, cic %p, grf %p, sgrf %p, pmucru %p, pmu %p\n", priv->cru, |
| priv->cic, priv->pmugrf, priv->pmusgrf, priv->pmucru, priv->pmu); |
| |
| #if CONFIG_IS_ENABLED(OF_PLATDATA) |
| ret = clk_get_by_index_platdata(dev, 0, dtplat->clocks, &priv->ddr_clk); |
| #else |
| ret = clk_get_by_index(dev, 0, &priv->ddr_clk); |
| #endif |
| if (ret) { |
| printf("%s clk get failed %d\n", __func__, ret); |
| return ret; |
| } |
| |
| ret = clk_set_rate(&priv->ddr_clk, params->base.ddr_freq * MHz); |
| if (ret < 0) { |
| printf("%s clk set failed %d\n", __func__, ret); |
| return ret; |
| } |
| |
| ret = sdram_init(priv, params); |
| if (ret < 0) { |
| printf("%s DRAM init failed %d\n", __func__, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static int rk3399_dmc_probe(struct udevice *dev) |
| { |
| #if defined(CONFIG_TPL_BUILD) || \ |
| (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) |
| if (rk3399_dmc_init(dev)) |
| return 0; |
| #else |
| struct dram_info *priv = dev_get_priv(dev); |
| |
| priv->pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF); |
| debug("%s: pmugrf = %p\n", __func__, priv->pmugrf); |
| priv->info.base = CONFIG_SYS_SDRAM_BASE; |
| priv->info.size = |
| rockchip_sdram_size((phys_addr_t)&priv->pmugrf->os_reg2); |
| #endif |
| return 0; |
| } |
| |
| static int rk3399_dmc_get_info(struct udevice *dev, struct ram_info *info) |
| { |
| struct dram_info *priv = dev_get_priv(dev); |
| |
| *info = priv->info; |
| |
| return 0; |
| } |
| |
| static struct ram_ops rk3399_dmc_ops = { |
| .get_info = rk3399_dmc_get_info, |
| }; |
| |
| static const struct udevice_id rk3399_dmc_ids[] = { |
| { .compatible = "rockchip,rk3399-dmc" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(dmc_rk3399) = { |
| .name = "rockchip_rk3399_dmc", |
| .id = UCLASS_RAM, |
| .of_match = rk3399_dmc_ids, |
| .ops = &rk3399_dmc_ops, |
| #if defined(CONFIG_TPL_BUILD) || \ |
| (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) |
| .ofdata_to_platdata = rk3399_dmc_ofdata_to_platdata, |
| #endif |
| .probe = rk3399_dmc_probe, |
| .priv_auto_alloc_size = sizeof(struct dram_info), |
| #if defined(CONFIG_TPL_BUILD) || \ |
| (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) |
| .platdata_auto_alloc_size = sizeof(struct rockchip_dmc_plat), |
| #endif |
| }; |