| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2015 Realtek Semiconductor Corp. All rights reserved. |
| * |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <log.h> |
| #include <malloc.h> |
| #include <memalign.h> |
| #include <net.h> |
| #include <usb.h> |
| #include <linux/mii.h> |
| #include <linux/bitops.h> |
| #include "usb_ether.h" |
| #include "r8152.h" |
| |
| #ifndef CONFIG_DM_ETH |
| /* local vars */ |
| static int curr_eth_dev; /* index for name of next device detected */ |
| |
| struct r8152_dongle { |
| unsigned short vendor; |
| unsigned short product; |
| }; |
| |
| static const struct r8152_dongle r8152_dongles[] = { |
| /* Realtek */ |
| { 0x0bda, 0x8050 }, |
| { 0x0bda, 0x8152 }, |
| { 0x0bda, 0x8153 }, |
| |
| /* Samsung */ |
| { 0x04e8, 0xa101 }, |
| |
| /* Lenovo */ |
| { 0x17ef, 0x304f }, |
| { 0x17ef, 0x3052 }, |
| { 0x17ef, 0x3054 }, |
| { 0x17ef, 0x3057 }, |
| { 0x17ef, 0x7205 }, |
| { 0x17ef, 0x720a }, |
| { 0x17ef, 0x720b }, |
| { 0x17ef, 0x720c }, |
| |
| /* TP-LINK */ |
| { 0x2357, 0x0601 }, |
| |
| /* Nvidia */ |
| { 0x0955, 0x09ff }, |
| }; |
| #endif |
| |
| struct r8152_version { |
| unsigned short tcr; |
| unsigned short version; |
| bool gmii; |
| }; |
| |
| static const struct r8152_version r8152_versions[] = { |
| { 0x4c00, RTL_VER_01, 0 }, |
| { 0x4c10, RTL_VER_02, 0 }, |
| { 0x5c00, RTL_VER_03, 1 }, |
| { 0x5c10, RTL_VER_04, 1 }, |
| { 0x5c20, RTL_VER_05, 1 }, |
| { 0x5c30, RTL_VER_06, 1 }, |
| { 0x4800, RTL_VER_07, 0 }, |
| }; |
| |
| static |
| int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data) |
| { |
| ALLOC_CACHE_ALIGN_BUFFER(void *, tmp, size); |
| int ret; |
| |
| ret = usb_control_msg(tp->udev, usb_rcvctrlpipe(tp->udev, 0), |
| RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, |
| value, index, tmp, size, 500); |
| memcpy(data, tmp, size); |
| return ret; |
| } |
| |
| static |
| int set_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data) |
| { |
| ALLOC_CACHE_ALIGN_BUFFER(void *, tmp, size); |
| |
| memcpy(tmp, data, size); |
| return usb_control_msg(tp->udev, usb_sndctrlpipe(tp->udev, 0), |
| RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE, |
| value, index, tmp, size, 500); |
| } |
| |
| int generic_ocp_read(struct r8152 *tp, u16 index, u16 size, |
| void *data, u16 type) |
| { |
| u16 burst_size = 64; |
| int ret; |
| int txsize; |
| |
| /* both size and index must be 4 bytes align */ |
| if ((size & 3) || !size || (index & 3) || !data) |
| return -EINVAL; |
| |
| if (index + size > 0xffff) |
| return -EINVAL; |
| |
| while (size) { |
| txsize = min(size, burst_size); |
| ret = get_registers(tp, index, type, txsize, data); |
| if (ret < 0) |
| break; |
| |
| index += txsize; |
| data += txsize; |
| size -= txsize; |
| } |
| |
| return ret; |
| } |
| |
| int generic_ocp_write(struct r8152 *tp, u16 index, u16 byteen, |
| u16 size, void *data, u16 type) |
| { |
| int ret; |
| u16 byteen_start, byteen_end, byte_en_to_hw; |
| u16 burst_size = 512; |
| int txsize; |
| |
| /* both size and index must be 4 bytes align */ |
| if ((size & 3) || !size || (index & 3) || !data) |
| return -EINVAL; |
| |
| if (index + size > 0xffff) |
| return -EINVAL; |
| |
| byteen_start = byteen & BYTE_EN_START_MASK; |
| byteen_end = byteen & BYTE_EN_END_MASK; |
| |
| byte_en_to_hw = byteen_start | (byteen_start << 4); |
| ret = set_registers(tp, index, type | byte_en_to_hw, 4, data); |
| if (ret < 0) |
| return ret; |
| |
| index += 4; |
| data += 4; |
| size -= 4; |
| |
| if (size) { |
| size -= 4; |
| |
| while (size) { |
| txsize = min(size, burst_size); |
| |
| ret = set_registers(tp, index, |
| type | BYTE_EN_DWORD, |
| txsize, data); |
| if (ret < 0) |
| return ret; |
| |
| index += txsize; |
| data += txsize; |
| size -= txsize; |
| } |
| |
| byte_en_to_hw = byteen_end | (byteen_end >> 4); |
| ret = set_registers(tp, index, type | byte_en_to_hw, 4, data); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| int pla_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data) |
| { |
| return generic_ocp_read(tp, index, size, data, MCU_TYPE_PLA); |
| } |
| |
| int pla_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data) |
| { |
| return generic_ocp_write(tp, index, byteen, size, data, MCU_TYPE_PLA); |
| } |
| |
| int usb_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data) |
| { |
| return generic_ocp_read(tp, index, size, data, MCU_TYPE_USB); |
| } |
| |
| int usb_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data) |
| { |
| return generic_ocp_write(tp, index, byteen, size, data, MCU_TYPE_USB); |
| } |
| |
| u32 ocp_read_dword(struct r8152 *tp, u16 type, u16 index) |
| { |
| __le32 data; |
| |
| generic_ocp_read(tp, index, sizeof(data), &data, type); |
| |
| return __le32_to_cpu(data); |
| } |
| |
| void ocp_write_dword(struct r8152 *tp, u16 type, u16 index, u32 data) |
| { |
| __le32 tmp = __cpu_to_le32(data); |
| |
| generic_ocp_write(tp, index, BYTE_EN_DWORD, sizeof(tmp), &tmp, type); |
| } |
| |
| u16 ocp_read_word(struct r8152 *tp, u16 type, u16 index) |
| { |
| u32 data; |
| __le32 tmp; |
| u8 shift = index & 2; |
| |
| index &= ~3; |
| |
| generic_ocp_read(tp, index, sizeof(tmp), &tmp, type); |
| |
| data = __le32_to_cpu(tmp); |
| data >>= (shift * 8); |
| data &= 0xffff; |
| |
| return data; |
| } |
| |
| void ocp_write_word(struct r8152 *tp, u16 type, u16 index, u32 data) |
| { |
| u32 mask = 0xffff; |
| __le32 tmp; |
| u16 byen = BYTE_EN_WORD; |
| u8 shift = index & 2; |
| |
| data &= mask; |
| |
| if (index & 2) { |
| byen <<= shift; |
| mask <<= (shift * 8); |
| data <<= (shift * 8); |
| index &= ~3; |
| } |
| |
| tmp = __cpu_to_le32(data); |
| |
| generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type); |
| } |
| |
| u8 ocp_read_byte(struct r8152 *tp, u16 type, u16 index) |
| { |
| u32 data; |
| __le32 tmp; |
| u8 shift = index & 3; |
| |
| index &= ~3; |
| |
| generic_ocp_read(tp, index, sizeof(tmp), &tmp, type); |
| |
| data = __le32_to_cpu(tmp); |
| data >>= (shift * 8); |
| data &= 0xff; |
| |
| return data; |
| } |
| |
| void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data) |
| { |
| u32 mask = 0xff; |
| __le32 tmp; |
| u16 byen = BYTE_EN_BYTE; |
| u8 shift = index & 3; |
| |
| data &= mask; |
| |
| if (index & 3) { |
| byen <<= shift; |
| mask <<= (shift * 8); |
| data <<= (shift * 8); |
| index &= ~3; |
| } |
| |
| tmp = __cpu_to_le32(data); |
| |
| generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type); |
| } |
| |
| u16 ocp_reg_read(struct r8152 *tp, u16 addr) |
| { |
| u16 ocp_base, ocp_index; |
| |
| ocp_base = addr & 0xf000; |
| if (ocp_base != tp->ocp_base) { |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base); |
| tp->ocp_base = ocp_base; |
| } |
| |
| ocp_index = (addr & 0x0fff) | 0xb000; |
| return ocp_read_word(tp, MCU_TYPE_PLA, ocp_index); |
| } |
| |
| void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data) |
| { |
| u16 ocp_base, ocp_index; |
| |
| ocp_base = addr & 0xf000; |
| if (ocp_base != tp->ocp_base) { |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base); |
| tp->ocp_base = ocp_base; |
| } |
| |
| ocp_index = (addr & 0x0fff) | 0xb000; |
| ocp_write_word(tp, MCU_TYPE_PLA, ocp_index, data); |
| } |
| |
| static void r8152_mdio_write(struct r8152 *tp, u32 reg_addr, u32 value) |
| { |
| ocp_reg_write(tp, OCP_BASE_MII + reg_addr * 2, value); |
| } |
| |
| static int r8152_mdio_read(struct r8152 *tp, u32 reg_addr) |
| { |
| return ocp_reg_read(tp, OCP_BASE_MII + reg_addr * 2); |
| } |
| |
| void sram_write(struct r8152 *tp, u16 addr, u16 data) |
| { |
| ocp_reg_write(tp, OCP_SRAM_ADDR, addr); |
| ocp_reg_write(tp, OCP_SRAM_DATA, data); |
| } |
| |
| int r8152_wait_for_bit(struct r8152 *tp, bool ocp_reg, u16 type, u16 index, |
| const u32 mask, bool set, unsigned int timeout) |
| { |
| u32 val; |
| |
| while (--timeout) { |
| if (ocp_reg) |
| val = ocp_reg_read(tp, index); |
| else |
| val = ocp_read_dword(tp, type, index); |
| |
| if (!set) |
| val = ~val; |
| |
| if ((val & mask) == mask) |
| return 0; |
| |
| mdelay(1); |
| } |
| |
| debug("%s: Timeout (index=%04x mask=%08x timeout=%d)\n", |
| __func__, index, mask, timeout); |
| |
| return -ETIMEDOUT; |
| } |
| |
| static void r8152b_reset_packet_filter(struct r8152 *tp) |
| { |
| u32 ocp_data; |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_FMC); |
| ocp_data &= ~FMC_FCR_MCU_EN; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data); |
| ocp_data |= FMC_FCR_MCU_EN; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data); |
| } |
| |
| static void rtl8152_wait_fifo_empty(struct r8152 *tp) |
| { |
| int ret; |
| |
| ret = r8152_wait_for_bit(tp, 0, MCU_TYPE_PLA, PLA_PHY_PWR, |
| PLA_PHY_PWR_TXEMP, 1, R8152_WAIT_TIMEOUT); |
| if (ret) |
| debug("Timeout waiting for FIFO empty\n"); |
| |
| ret = r8152_wait_for_bit(tp, 0, MCU_TYPE_PLA, PLA_TCR0, |
| TCR0_TX_EMPTY, 1, R8152_WAIT_TIMEOUT); |
| if (ret) |
| debug("Timeout waiting for TX empty\n"); |
| } |
| |
| static void rtl8152_nic_reset(struct r8152 *tp) |
| { |
| int ret; |
| u32 ocp_data; |
| |
| ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, BIST_CTRL); |
| ocp_data |= BIST_CTRL_SW_RESET; |
| ocp_write_dword(tp, MCU_TYPE_PLA, BIST_CTRL, ocp_data); |
| |
| ret = r8152_wait_for_bit(tp, 0, MCU_TYPE_PLA, BIST_CTRL, |
| BIST_CTRL_SW_RESET, 0, R8152_WAIT_TIMEOUT); |
| if (ret) |
| debug("Timeout waiting for NIC reset\n"); |
| } |
| |
| static u8 rtl8152_get_speed(struct r8152 *tp) |
| { |
| return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS); |
| } |
| |
| static void rtl_set_eee_plus(struct r8152 *tp) |
| { |
| u32 ocp_data; |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR); |
| ocp_data &= ~EEEP_CR_EEEP_TX; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data); |
| } |
| |
| static void rxdy_gated_en(struct r8152 *tp, bool enable) |
| { |
| u32 ocp_data; |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1); |
| if (enable) |
| ocp_data |= RXDY_GATED_EN; |
| else |
| ocp_data &= ~RXDY_GATED_EN; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data); |
| } |
| |
| static void rtl8152_set_rx_mode(struct r8152 *tp) |
| { |
| u32 ocp_data; |
| __le32 tmp[2]; |
| |
| tmp[0] = 0xffffffff; |
| tmp[1] = 0xffffffff; |
| |
| pla_ocp_write(tp, PLA_MAR, BYTE_EN_DWORD, sizeof(tmp), tmp); |
| |
| ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); |
| ocp_data |= RCR_APM | RCR_AM | RCR_AB; |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); |
| } |
| |
| static int rtl_enable(struct r8152 *tp) |
| { |
| u32 ocp_data; |
| |
| r8152b_reset_packet_filter(tp); |
| |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR); |
| ocp_data |= PLA_CR_RE | PLA_CR_TE; |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data); |
| |
| rxdy_gated_en(tp, false); |
| |
| rtl8152_set_rx_mode(tp); |
| |
| return 0; |
| } |
| |
| static int rtl8152_enable(struct r8152 *tp) |
| { |
| rtl_set_eee_plus(tp); |
| |
| return rtl_enable(tp); |
| } |
| |
| static void r8153_set_rx_early_timeout(struct r8152 *tp) |
| { |
| u32 ocp_data = tp->coalesce / 8; |
| |
| ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT, ocp_data); |
| } |
| |
| static void r8153_set_rx_early_size(struct r8152 *tp) |
| { |
| u32 ocp_data = (RTL8152_AGG_BUF_SZ - RTL8153_RMS) / 4; |
| |
| ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE, ocp_data); |
| } |
| |
| static int rtl8153_enable(struct r8152 *tp) |
| { |
| rtl_set_eee_plus(tp); |
| r8153_set_rx_early_timeout(tp); |
| r8153_set_rx_early_size(tp); |
| |
| return rtl_enable(tp); |
| } |
| |
| static void rtl_disable(struct r8152 *tp) |
| { |
| u32 ocp_data; |
| |
| ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); |
| ocp_data &= ~RCR_ACPT_ALL; |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); |
| |
| rxdy_gated_en(tp, true); |
| |
| rtl8152_wait_fifo_empty(tp); |
| rtl8152_nic_reset(tp); |
| } |
| |
| static void r8152_power_cut_en(struct r8152 *tp, bool enable) |
| { |
| u32 ocp_data; |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL); |
| if (enable) |
| ocp_data |= POWER_CUT; |
| else |
| ocp_data &= ~POWER_CUT; |
| ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS); |
| ocp_data &= ~RESUME_INDICATE; |
| ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data); |
| } |
| |
| static void rtl_rx_vlan_en(struct r8152 *tp, bool enable) |
| { |
| u32 ocp_data; |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR); |
| if (enable) |
| ocp_data |= CPCR_RX_VLAN; |
| else |
| ocp_data &= ~CPCR_RX_VLAN; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data); |
| } |
| |
| static void r8153_u1u2en(struct r8152 *tp, bool enable) |
| { |
| u8 u1u2[8]; |
| |
| if (enable) |
| memset(u1u2, 0xff, sizeof(u1u2)); |
| else |
| memset(u1u2, 0x00, sizeof(u1u2)); |
| |
| usb_ocp_write(tp, USB_TOLERANCE, BYTE_EN_SIX_BYTES, sizeof(u1u2), u1u2); |
| } |
| |
| static void r8153_u2p3en(struct r8152 *tp, bool enable) |
| { |
| u32 ocp_data; |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL); |
| if (enable && tp->version != RTL_VER_03 && tp->version != RTL_VER_04) |
| ocp_data |= U2P3_ENABLE; |
| else |
| ocp_data &= ~U2P3_ENABLE; |
| ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data); |
| } |
| |
| static void r8153_power_cut_en(struct r8152 *tp, bool enable) |
| { |
| u32 ocp_data; |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_POWER_CUT); |
| if (enable) |
| ocp_data |= PWR_EN | PHASE2_EN; |
| else |
| ocp_data &= ~(PWR_EN | PHASE2_EN); |
| ocp_write_word(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0); |
| ocp_data &= ~PCUT_STATUS; |
| ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data); |
| } |
| |
| static int r8152_read_mac(struct r8152 *tp, unsigned char *macaddr) |
| { |
| int ret; |
| unsigned char enetaddr[8] = {0}; |
| |
| ret = pla_ocp_read(tp, PLA_IDR, 8, enetaddr); |
| if (ret < 0) |
| return ret; |
| |
| memcpy(macaddr, enetaddr, ETH_ALEN); |
| return 0; |
| } |
| |
| static void r8152b_disable_aldps(struct r8152 *tp) |
| { |
| ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPDNPS | LINKENA | DIS_SDSAVE); |
| mdelay(20); |
| } |
| |
| static void r8152b_enable_aldps(struct r8152 *tp) |
| { |
| ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPWRSAVE | ENPDNPS | |
| LINKENA | DIS_SDSAVE); |
| } |
| |
| static void rtl8152_disable(struct r8152 *tp) |
| { |
| r8152b_disable_aldps(tp); |
| rtl_disable(tp); |
| r8152b_enable_aldps(tp); |
| } |
| |
| static void r8152b_hw_phy_cfg(struct r8152 *tp) |
| { |
| u16 data; |
| |
| data = r8152_mdio_read(tp, MII_BMCR); |
| if (data & BMCR_PDOWN) { |
| data &= ~BMCR_PDOWN; |
| r8152_mdio_write(tp, MII_BMCR, data); |
| } |
| |
| r8152b_firmware(tp); |
| } |
| |
| static void rtl8152_reinit_ll(struct r8152 *tp) |
| { |
| u32 ocp_data; |
| int ret; |
| |
| ret = r8152_wait_for_bit(tp, 0, MCU_TYPE_PLA, PLA_PHY_PWR, |
| PLA_PHY_PWR_LLR, 1, R8152_WAIT_TIMEOUT); |
| if (ret) |
| debug("Timeout waiting for link list ready\n"); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); |
| ocp_data |= RE_INIT_LL; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); |
| |
| ret = r8152_wait_for_bit(tp, 0, MCU_TYPE_PLA, PLA_PHY_PWR, |
| PLA_PHY_PWR_LLR, 1, R8152_WAIT_TIMEOUT); |
| if (ret) |
| debug("Timeout waiting for link list ready\n"); |
| } |
| |
| static void r8152b_exit_oob(struct r8152 *tp) |
| { |
| u32 ocp_data; |
| |
| ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); |
| ocp_data &= ~RCR_ACPT_ALL; |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); |
| |
| rxdy_gated_en(tp, true); |
| r8152b_hw_phy_cfg(tp); |
| |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML); |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, 0x00); |
| |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); |
| ocp_data &= ~NOW_IS_OOB; |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); |
| ocp_data &= ~MCU_BORW_EN; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); |
| |
| rtl8152_reinit_ll(tp); |
| rtl8152_nic_reset(tp); |
| |
| /* rx share fifo credit full threshold */ |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL); |
| |
| if (tp->udev->speed == USB_SPEED_FULL || |
| tp->udev->speed == USB_SPEED_LOW) { |
| /* rx share fifo credit near full threshold */ |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, |
| RXFIFO_THR2_FULL); |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, |
| RXFIFO_THR3_FULL); |
| } else { |
| /* rx share fifo credit near full threshold */ |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, |
| RXFIFO_THR2_HIGH); |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, |
| RXFIFO_THR3_HIGH); |
| } |
| |
| /* TX share fifo free credit full threshold */ |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL); |
| |
| ocp_write_byte(tp, MCU_TYPE_USB, USB_TX_AGG, TX_AGG_MAX_THRESHOLD); |
| ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_HIGH); |
| ocp_write_dword(tp, MCU_TYPE_USB, USB_TX_DMA, |
| TEST_MODE_DISABLE | TX_SIZE_ADJUST1); |
| |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0); |
| ocp_data |= TCR0_AUTO_FIFO; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR0, ocp_data); |
| } |
| |
| static void r8152b_enter_oob(struct r8152 *tp) |
| { |
| u32 ocp_data; |
| |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); |
| ocp_data &= ~NOW_IS_OOB; |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); |
| |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_OOB); |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_OOB); |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_OOB); |
| |
| rtl_disable(tp); |
| |
| rtl8152_reinit_ll(tp); |
| |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS); |
| |
| rtl_rx_vlan_en(tp, false); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PAL_BDC_CR); |
| ocp_data |= ALDPS_PROXY_MODE; |
| ocp_write_word(tp, MCU_TYPE_PLA, PAL_BDC_CR, ocp_data); |
| |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); |
| ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB; |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); |
| |
| rxdy_gated_en(tp, false); |
| |
| ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); |
| ocp_data |= RCR_APM | RCR_AM | RCR_AB; |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); |
| } |
| |
| static void r8153_hw_phy_cfg(struct r8152 *tp) |
| { |
| u32 ocp_data; |
| u16 data; |
| |
| if (tp->version == RTL_VER_03 || tp->version == RTL_VER_04 || |
| tp->version == RTL_VER_05) |
| ocp_reg_write(tp, OCP_ADC_CFG, CKADSEL_L | ADC_EN | EN_EMI_L); |
| |
| data = r8152_mdio_read(tp, MII_BMCR); |
| if (data & BMCR_PDOWN) { |
| data &= ~BMCR_PDOWN; |
| r8152_mdio_write(tp, MII_BMCR, data); |
| } |
| |
| r8153_firmware(tp); |
| |
| if (tp->version == RTL_VER_03) { |
| data = ocp_reg_read(tp, OCP_EEE_CFG); |
| data &= ~CTAP_SHORT_EN; |
| ocp_reg_write(tp, OCP_EEE_CFG, data); |
| } |
| |
| data = ocp_reg_read(tp, OCP_POWER_CFG); |
| data |= EEE_CLKDIV_EN; |
| ocp_reg_write(tp, OCP_POWER_CFG, data); |
| |
| data = ocp_reg_read(tp, OCP_DOWN_SPEED); |
| data |= EN_10M_BGOFF; |
| ocp_reg_write(tp, OCP_DOWN_SPEED, data); |
| data = ocp_reg_read(tp, OCP_POWER_CFG); |
| data |= EN_10M_PLLOFF; |
| ocp_reg_write(tp, OCP_POWER_CFG, data); |
| sram_write(tp, SRAM_IMPEDANCE, 0x0b13); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR); |
| ocp_data |= PFM_PWM_SWITCH; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data); |
| |
| /* Enable LPF corner auto tune */ |
| sram_write(tp, SRAM_LPF_CFG, 0xf70f); |
| |
| /* Adjust 10M Amplitude */ |
| sram_write(tp, SRAM_10M_AMP1, 0x00af); |
| sram_write(tp, SRAM_10M_AMP2, 0x0208); |
| } |
| |
| static void r8153_first_init(struct r8152 *tp) |
| { |
| u32 ocp_data; |
| |
| rxdy_gated_en(tp, true); |
| |
| ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); |
| ocp_data &= ~RCR_ACPT_ALL; |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); |
| |
| r8153_hw_phy_cfg(tp); |
| |
| rtl8152_nic_reset(tp); |
| |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); |
| ocp_data &= ~NOW_IS_OOB; |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); |
| ocp_data &= ~MCU_BORW_EN; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); |
| |
| rtl8152_reinit_ll(tp); |
| |
| rtl_rx_vlan_en(tp, false); |
| |
| ocp_data = RTL8153_RMS; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, ocp_data); |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0); |
| ocp_data |= TCR0_AUTO_FIFO; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR0, ocp_data); |
| |
| rtl8152_nic_reset(tp); |
| |
| /* rx share fifo credit full threshold */ |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL); |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_NORMAL); |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_NORMAL); |
| /* TX share fifo free credit full threshold */ |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL2); |
| |
| /* rx aggregation */ |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); |
| |
| ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN); |
| ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); |
| } |
| |
| static void r8153_enter_oob(struct r8152 *tp) |
| { |
| u32 ocp_data; |
| |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); |
| ocp_data &= ~NOW_IS_OOB; |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); |
| |
| rtl_disable(tp); |
| |
| rtl8152_reinit_ll(tp); |
| |
| ocp_data = RTL8153_RMS; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, ocp_data); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG); |
| ocp_data &= ~TEREDO_WAKE_MASK; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data); |
| |
| rtl_rx_vlan_en(tp, false); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PAL_BDC_CR); |
| ocp_data |= ALDPS_PROXY_MODE; |
| ocp_write_word(tp, MCU_TYPE_PLA, PAL_BDC_CR, ocp_data); |
| |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); |
| ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB; |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); |
| |
| rxdy_gated_en(tp, false); |
| |
| ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); |
| ocp_data |= RCR_APM | RCR_AM | RCR_AB; |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); |
| } |
| |
| static void r8153_disable_aldps(struct r8152 *tp) |
| { |
| u16 data; |
| |
| data = ocp_reg_read(tp, OCP_POWER_CFG); |
| data &= ~EN_ALDPS; |
| ocp_reg_write(tp, OCP_POWER_CFG, data); |
| mdelay(20); |
| } |
| |
| static void rtl8153_disable(struct r8152 *tp) |
| { |
| r8153_disable_aldps(tp); |
| rtl_disable(tp); |
| } |
| |
| static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex) |
| { |
| u16 bmcr, anar, gbcr; |
| |
| anar = r8152_mdio_read(tp, MII_ADVERTISE); |
| anar &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL | |
| ADVERTISE_100HALF | ADVERTISE_100FULL); |
| if (tp->supports_gmii) { |
| gbcr = r8152_mdio_read(tp, MII_CTRL1000); |
| gbcr &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); |
| } else { |
| gbcr = 0; |
| } |
| |
| if (autoneg == AUTONEG_DISABLE) { |
| if (speed == SPEED_10) { |
| bmcr = 0; |
| anar |= ADVERTISE_10HALF | ADVERTISE_10FULL; |
| } else if (speed == SPEED_100) { |
| bmcr = BMCR_SPEED100; |
| anar |= ADVERTISE_100HALF | ADVERTISE_100FULL; |
| } else if (speed == SPEED_1000 && tp->supports_gmii) { |
| bmcr = BMCR_SPEED1000; |
| gbcr |= ADVERTISE_1000FULL | ADVERTISE_1000HALF; |
| } else { |
| return -EINVAL; |
| } |
| |
| if (duplex == DUPLEX_FULL) |
| bmcr |= BMCR_FULLDPLX; |
| } else { |
| if (speed == SPEED_10) { |
| if (duplex == DUPLEX_FULL) |
| anar |= ADVERTISE_10HALF | ADVERTISE_10FULL; |
| else |
| anar |= ADVERTISE_10HALF; |
| } else if (speed == SPEED_100) { |
| if (duplex == DUPLEX_FULL) { |
| anar |= ADVERTISE_10HALF | ADVERTISE_10FULL; |
| anar |= ADVERTISE_100HALF | ADVERTISE_100FULL; |
| } else { |
| anar |= ADVERTISE_10HALF; |
| anar |= ADVERTISE_100HALF; |
| } |
| } else if (speed == SPEED_1000 && tp->supports_gmii) { |
| if (duplex == DUPLEX_FULL) { |
| anar |= ADVERTISE_10HALF | ADVERTISE_10FULL; |
| anar |= ADVERTISE_100HALF | ADVERTISE_100FULL; |
| gbcr |= ADVERTISE_1000FULL | ADVERTISE_1000HALF; |
| } else { |
| anar |= ADVERTISE_10HALF; |
| anar |= ADVERTISE_100HALF; |
| gbcr |= ADVERTISE_1000HALF; |
| } |
| } else { |
| return -EINVAL; |
| } |
| |
| bmcr = BMCR_ANENABLE | BMCR_ANRESTART; |
| } |
| |
| if (tp->supports_gmii) |
| r8152_mdio_write(tp, MII_CTRL1000, gbcr); |
| |
| r8152_mdio_write(tp, MII_ADVERTISE, anar); |
| r8152_mdio_write(tp, MII_BMCR, bmcr); |
| |
| return 0; |
| } |
| |
| static void rtl8152_up(struct r8152 *tp) |
| { |
| r8152b_disable_aldps(tp); |
| r8152b_exit_oob(tp); |
| r8152b_enable_aldps(tp); |
| } |
| |
| static void rtl8152_down(struct r8152 *tp) |
| { |
| r8152_power_cut_en(tp, false); |
| r8152b_disable_aldps(tp); |
| r8152b_enter_oob(tp); |
| r8152b_enable_aldps(tp); |
| } |
| |
| static void rtl8153_up(struct r8152 *tp) |
| { |
| r8153_u1u2en(tp, false); |
| r8153_disable_aldps(tp); |
| r8153_first_init(tp); |
| r8153_u2p3en(tp, false); |
| } |
| |
| static void rtl8153_down(struct r8152 *tp) |
| { |
| r8153_u1u2en(tp, false); |
| r8153_u2p3en(tp, false); |
| r8153_power_cut_en(tp, false); |
| r8153_disable_aldps(tp); |
| r8153_enter_oob(tp); |
| } |
| |
| static void r8152b_get_version(struct r8152 *tp) |
| { |
| u32 ocp_data; |
| u16 tcr; |
| int i; |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR1); |
| tcr = (u16)(ocp_data & VERSION_MASK); |
| |
| for (i = 0; i < ARRAY_SIZE(r8152_versions); i++) { |
| if (tcr == r8152_versions[i].tcr) { |
| /* Found a supported version */ |
| tp->version = r8152_versions[i].version; |
| tp->supports_gmii = r8152_versions[i].gmii; |
| break; |
| } |
| } |
| |
| if (tp->version == RTL_VER_UNKNOWN) |
| debug("r8152 Unknown tcr version 0x%04x\n", tcr); |
| } |
| |
| static void r8152b_enable_fc(struct r8152 *tp) |
| { |
| u16 anar; |
| anar = r8152_mdio_read(tp, MII_ADVERTISE); |
| anar |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; |
| r8152_mdio_write(tp, MII_ADVERTISE, anar); |
| } |
| |
| static void rtl_tally_reset(struct r8152 *tp) |
| { |
| u32 ocp_data; |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY); |
| ocp_data |= TALLY_RESET; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data); |
| } |
| |
| static void r8152b_init(struct r8152 *tp) |
| { |
| u32 ocp_data; |
| |
| r8152b_disable_aldps(tp); |
| |
| if (tp->version == RTL_VER_01) { |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE); |
| ocp_data &= ~LED_MODE_MASK; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data); |
| } |
| |
| r8152_power_cut_en(tp, false); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR); |
| ocp_data |= TX_10M_IDLE_EN | PFM_PWM_SWITCH; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data); |
| ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL); |
| ocp_data &= ~MCU_CLK_RATIO_MASK; |
| ocp_data |= MCU_CLK_RATIO | D3_CLK_GATED_EN; |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ocp_data); |
| ocp_data = GPHY_STS_MSK | SPEED_DOWN_MSK | |
| SPDWN_RXDV_MSK | SPDWN_LINKCHG_MSK; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_GPHY_INTR_IMR, ocp_data); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_TIMER); |
| ocp_data |= BIT(15); |
| ocp_write_word(tp, MCU_TYPE_USB, USB_USB_TIMER, ocp_data); |
| ocp_write_word(tp, MCU_TYPE_USB, 0xcbfc, 0x03e8); |
| ocp_data &= ~BIT(15); |
| ocp_write_word(tp, MCU_TYPE_USB, USB_USB_TIMER, ocp_data); |
| |
| r8152b_enable_fc(tp); |
| rtl_tally_reset(tp); |
| |
| /* enable rx aggregation */ |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); |
| |
| ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN); |
| ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); |
| } |
| |
| static void r8153_init(struct r8152 *tp) |
| { |
| int i; |
| u32 ocp_data; |
| |
| r8153_disable_aldps(tp); |
| r8153_u1u2en(tp, false); |
| |
| r8152_wait_for_bit(tp, 0, MCU_TYPE_PLA, PLA_BOOT_CTRL, |
| AUTOLOAD_DONE, 1, R8152_WAIT_TIMEOUT); |
| |
| for (i = 0; i < R8152_WAIT_TIMEOUT; i++) { |
| ocp_data = ocp_reg_read(tp, OCP_PHY_STATUS) & PHY_STAT_MASK; |
| if (ocp_data == PHY_STAT_LAN_ON || ocp_data == PHY_STAT_PWRDN) |
| break; |
| |
| mdelay(1); |
| } |
| |
| r8153_u2p3en(tp, false); |
| |
| if (tp->version == RTL_VER_04) { |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_SSPHYLINK2); |
| ocp_data &= ~pwd_dn_scale_mask; |
| ocp_data |= pwd_dn_scale(96); |
| ocp_write_word(tp, MCU_TYPE_USB, USB_SSPHYLINK2, ocp_data); |
| |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_USB2PHY); |
| ocp_data |= USB2PHY_L1 | USB2PHY_SUSPEND; |
| ocp_write_byte(tp, MCU_TYPE_USB, USB_USB2PHY, ocp_data); |
| } else if (tp->version == RTL_VER_05) { |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_DMY_REG0); |
| ocp_data &= ~ECM_ALDPS; |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_DMY_REG0, ocp_data); |
| |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1); |
| if (ocp_read_word(tp, MCU_TYPE_USB, USB_BURST_SIZE) == 0) |
| ocp_data &= ~DYNAMIC_BURST; |
| else |
| ocp_data |= DYNAMIC_BURST; |
| ocp_write_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1, ocp_data); |
| } else if (tp->version == RTL_VER_06) { |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1); |
| if (ocp_read_word(tp, MCU_TYPE_USB, USB_BURST_SIZE) == 0) |
| ocp_data &= ~DYNAMIC_BURST; |
| else |
| ocp_data |= DYNAMIC_BURST; |
| ocp_write_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1, ocp_data); |
| } |
| |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY2); |
| ocp_data |= EP4_FULL_FC; |
| ocp_write_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY2, ocp_data); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL); |
| ocp_data &= ~TIMER11_EN; |
| ocp_write_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL, ocp_data); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE); |
| ocp_data &= ~LED_MODE_MASK; |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data); |
| |
| ocp_data = FIFO_EMPTY_1FB | ROK_EXIT_LPM; |
| if (tp->version == RTL_VER_04 && tp->udev->speed != USB_SPEED_SUPER) |
| ocp_data |= LPM_TIMER_500MS; |
| else |
| ocp_data |= LPM_TIMER_500US; |
| ocp_write_byte(tp, MCU_TYPE_USB, USB_LPM_CTRL, ocp_data); |
| |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2); |
| ocp_data &= ~SEN_VAL_MASK; |
| ocp_data |= SEN_VAL_NORMAL | SEL_RXIDLE; |
| ocp_write_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2, ocp_data); |
| |
| ocp_write_word(tp, MCU_TYPE_USB, USB_CONNECT_TIMER, 0x0001); |
| |
| r8153_power_cut_en(tp, false); |
| |
| r8152b_enable_fc(tp); |
| rtl_tally_reset(tp); |
| } |
| |
| static void rtl8152_unload(struct r8152 *tp) |
| { |
| if (tp->version != RTL_VER_01) |
| r8152_power_cut_en(tp, true); |
| } |
| |
| static void rtl8153_unload(struct r8152 *tp) |
| { |
| r8153_power_cut_en(tp, false); |
| } |
| |
| static int rtl_ops_init(struct r8152 *tp) |
| { |
| struct rtl_ops *ops = &tp->rtl_ops; |
| int ret = 0; |
| |
| switch (tp->version) { |
| case RTL_VER_01: |
| case RTL_VER_02: |
| case RTL_VER_07: |
| ops->init = r8152b_init; |
| ops->enable = rtl8152_enable; |
| ops->disable = rtl8152_disable; |
| ops->up = rtl8152_up; |
| ops->down = rtl8152_down; |
| ops->unload = rtl8152_unload; |
| break; |
| |
| case RTL_VER_03: |
| case RTL_VER_04: |
| case RTL_VER_05: |
| case RTL_VER_06: |
| ops->init = r8153_init; |
| ops->enable = rtl8153_enable; |
| ops->disable = rtl8153_disable; |
| ops->up = rtl8153_up; |
| ops->down = rtl8153_down; |
| ops->unload = rtl8153_unload; |
| break; |
| |
| default: |
| ret = -ENODEV; |
| printf("r8152 Unknown Device\n"); |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int r8152_init_common(struct r8152 *tp) |
| { |
| u8 speed; |
| int timeout = 0; |
| int link_detected; |
| |
| debug("** %s()\n", __func__); |
| |
| do { |
| speed = rtl8152_get_speed(tp); |
| |
| link_detected = speed & LINK_STATUS; |
| if (!link_detected) { |
| if (timeout == 0) |
| printf("Waiting for Ethernet connection... "); |
| mdelay(TIMEOUT_RESOLUTION); |
| timeout += TIMEOUT_RESOLUTION; |
| } |
| } while (!link_detected && timeout < PHY_CONNECT_TIMEOUT); |
| if (link_detected) { |
| tp->rtl_ops.enable(tp); |
| |
| if (timeout != 0) |
| printf("done.\n"); |
| } else { |
| printf("unable to connect.\n"); |
| } |
| |
| return 0; |
| } |
| |
| static int r8152_send_common(struct ueth_data *ueth, void *packet, int length) |
| { |
| struct usb_device *udev = ueth->pusb_dev; |
| u32 opts1, opts2 = 0; |
| int err; |
| int actual_len; |
| ALLOC_CACHE_ALIGN_BUFFER(uint8_t, msg, |
| PKTSIZE + sizeof(struct tx_desc)); |
| struct tx_desc *tx_desc = (struct tx_desc *)msg; |
| |
| debug("** %s(), len %d\n", __func__, length); |
| |
| opts1 = length | TX_FS | TX_LS; |
| |
| tx_desc->opts2 = cpu_to_le32(opts2); |
| tx_desc->opts1 = cpu_to_le32(opts1); |
| |
| memcpy(msg + sizeof(struct tx_desc), (void *)packet, length); |
| |
| err = usb_bulk_msg(udev, usb_sndbulkpipe(udev, ueth->ep_out), |
| (void *)msg, length + sizeof(struct tx_desc), |
| &actual_len, USB_BULK_SEND_TIMEOUT); |
| debug("Tx: len = %zu, actual = %u, err = %d\n", |
| length + sizeof(struct tx_desc), actual_len, err); |
| |
| return err; |
| } |
| |
| #ifndef CONFIG_DM_ETH |
| static int r8152_init(struct eth_device *eth, bd_t *bd) |
| { |
| struct ueth_data *dev = (struct ueth_data *)eth->priv; |
| struct r8152 *tp = (struct r8152 *)dev->dev_priv; |
| |
| return r8152_init_common(tp); |
| } |
| |
| static int r8152_send(struct eth_device *eth, void *packet, int length) |
| { |
| struct ueth_data *dev = (struct ueth_data *)eth->priv; |
| |
| return r8152_send_common(dev, packet, length); |
| } |
| |
| static int r8152_recv(struct eth_device *eth) |
| { |
| struct ueth_data *dev = (struct ueth_data *)eth->priv; |
| |
| ALLOC_CACHE_ALIGN_BUFFER(uint8_t, recv_buf, RTL8152_AGG_BUF_SZ); |
| unsigned char *pkt_ptr; |
| int err; |
| int actual_len; |
| u16 packet_len; |
| |
| u32 bytes_process = 0; |
| struct rx_desc *rx_desc; |
| |
| debug("** %s()\n", __func__); |
| |
| err = usb_bulk_msg(dev->pusb_dev, |
| usb_rcvbulkpipe(dev->pusb_dev, dev->ep_in), |
| (void *)recv_buf, |
| RTL8152_AGG_BUF_SZ, |
| &actual_len, |
| USB_BULK_RECV_TIMEOUT); |
| debug("Rx: len = %u, actual = %u, err = %d\n", RTL8152_AGG_BUF_SZ, |
| actual_len, err); |
| if (err != 0) { |
| debug("Rx: failed to receive\n"); |
| return -1; |
| } |
| if (actual_len > RTL8152_AGG_BUF_SZ) { |
| debug("Rx: received too many bytes %d\n", actual_len); |
| return -1; |
| } |
| |
| while (bytes_process < actual_len) { |
| rx_desc = (struct rx_desc *)(recv_buf + bytes_process); |
| pkt_ptr = recv_buf + sizeof(struct rx_desc) + bytes_process; |
| |
| packet_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK; |
| packet_len -= CRC_SIZE; |
| |
| net_process_received_packet(pkt_ptr, packet_len); |
| |
| bytes_process += |
| (packet_len + sizeof(struct rx_desc) + CRC_SIZE); |
| |
| if (bytes_process % 8) |
| bytes_process = bytes_process + 8 - (bytes_process % 8); |
| } |
| |
| return 0; |
| } |
| |
| static void r8152_halt(struct eth_device *eth) |
| { |
| struct ueth_data *dev = (struct ueth_data *)eth->priv; |
| struct r8152 *tp = (struct r8152 *)dev->dev_priv; |
| |
| debug("** %s()\n", __func__); |
| |
| tp->rtl_ops.disable(tp); |
| } |
| |
| static int r8152_write_hwaddr(struct eth_device *eth) |
| { |
| struct ueth_data *dev = (struct ueth_data *)eth->priv; |
| struct r8152 *tp = (struct r8152 *)dev->dev_priv; |
| |
| unsigned char enetaddr[8] = {0}; |
| |
| memcpy(enetaddr, eth->enetaddr, ETH_ALEN); |
| |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG); |
| pla_ocp_write(tp, PLA_IDR, BYTE_EN_SIX_BYTES, 8, enetaddr); |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML); |
| |
| debug("MAC %pM\n", eth->enetaddr); |
| return 0; |
| } |
| |
| void r8152_eth_before_probe(void) |
| { |
| curr_eth_dev = 0; |
| } |
| |
| /* Probe to see if a new device is actually an realtek device */ |
| int r8152_eth_probe(struct usb_device *dev, unsigned int ifnum, |
| struct ueth_data *ss) |
| { |
| struct usb_interface *iface; |
| struct usb_interface_descriptor *iface_desc; |
| int ep_in_found = 0, ep_out_found = 0; |
| int i; |
| |
| struct r8152 *tp; |
| |
| /* let's examine the device now */ |
| iface = &dev->config.if_desc[ifnum]; |
| iface_desc = &dev->config.if_desc[ifnum].desc; |
| |
| for (i = 0; i < ARRAY_SIZE(r8152_dongles); i++) { |
| if (dev->descriptor.idVendor == r8152_dongles[i].vendor && |
| dev->descriptor.idProduct == r8152_dongles[i].product) |
| /* Found a supported dongle */ |
| break; |
| } |
| |
| if (i == ARRAY_SIZE(r8152_dongles)) |
| return 0; |
| |
| memset(ss, 0, sizeof(struct ueth_data)); |
| |
| /* At this point, we know we've got a live one */ |
| debug("\n\nUSB Ethernet device detected: %#04x:%#04x\n", |
| dev->descriptor.idVendor, dev->descriptor.idProduct); |
| |
| /* Initialize the ueth_data structure with some useful info */ |
| ss->ifnum = ifnum; |
| ss->pusb_dev = dev; |
| ss->subclass = iface_desc->bInterfaceSubClass; |
| ss->protocol = iface_desc->bInterfaceProtocol; |
| |
| /* alloc driver private */ |
| ss->dev_priv = calloc(1, sizeof(struct r8152)); |
| |
| if (!ss->dev_priv) |
| return 0; |
| |
| /* |
| * We are expecting a minimum of 3 endpoints - in, out (bulk), and |
| * int. We will ignore any others. |
| */ |
| for (i = 0; i < iface_desc->bNumEndpoints; i++) { |
| /* is it an BULK endpoint? */ |
| if ((iface->ep_desc[i].bmAttributes & |
| USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) { |
| u8 ep_addr = iface->ep_desc[i].bEndpointAddress; |
| if ((ep_addr & USB_DIR_IN) && !ep_in_found) { |
| ss->ep_in = ep_addr & |
| USB_ENDPOINT_NUMBER_MASK; |
| ep_in_found = 1; |
| } else { |
| if (!ep_out_found) { |
| ss->ep_out = ep_addr & |
| USB_ENDPOINT_NUMBER_MASK; |
| ep_out_found = 1; |
| } |
| } |
| } |
| |
| /* is it an interrupt endpoint? */ |
| if ((iface->ep_desc[i].bmAttributes & |
| USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) { |
| ss->ep_int = iface->ep_desc[i].bEndpointAddress & |
| USB_ENDPOINT_NUMBER_MASK; |
| ss->irqinterval = iface->ep_desc[i].bInterval; |
| } |
| } |
| |
| debug("Endpoints In %d Out %d Int %d\n", |
| ss->ep_in, ss->ep_out, ss->ep_int); |
| |
| /* Do some basic sanity checks, and bail if we find a problem */ |
| if (usb_set_interface(dev, iface_desc->bInterfaceNumber, 0) || |
| !ss->ep_in || !ss->ep_out || !ss->ep_int) { |
| debug("Problems with device\n"); |
| return 0; |
| } |
| |
| dev->privptr = (void *)ss; |
| |
| tp = ss->dev_priv; |
| tp->udev = dev; |
| tp->intf = iface; |
| |
| r8152b_get_version(tp); |
| |
| if (rtl_ops_init(tp)) |
| return 0; |
| |
| tp->rtl_ops.init(tp); |
| tp->rtl_ops.up(tp); |
| |
| rtl8152_set_speed(tp, AUTONEG_ENABLE, |
| tp->supports_gmii ? SPEED_1000 : SPEED_100, |
| DUPLEX_FULL); |
| |
| return 1; |
| } |
| |
| int r8152_eth_get_info(struct usb_device *dev, struct ueth_data *ss, |
| struct eth_device *eth) |
| { |
| if (!eth) { |
| debug("%s: missing parameter.\n", __func__); |
| return 0; |
| } |
| |
| sprintf(eth->name, "%s#%d", R8152_BASE_NAME, curr_eth_dev++); |
| eth->init = r8152_init; |
| eth->send = r8152_send; |
| eth->recv = r8152_recv; |
| eth->halt = r8152_halt; |
| eth->write_hwaddr = r8152_write_hwaddr; |
| eth->priv = ss; |
| |
| /* Get the MAC address */ |
| if (r8152_read_mac(ss->dev_priv, eth->enetaddr) < 0) |
| return 0; |
| |
| debug("MAC %pM\n", eth->enetaddr); |
| return 1; |
| } |
| #endif /* !CONFIG_DM_ETH */ |
| |
| #ifdef CONFIG_DM_ETH |
| static int r8152_eth_start(struct udevice *dev) |
| { |
| struct r8152 *tp = dev_get_priv(dev); |
| |
| debug("** %s (%d)\n", __func__, __LINE__); |
| |
| return r8152_init_common(tp); |
| } |
| |
| void r8152_eth_stop(struct udevice *dev) |
| { |
| struct r8152 *tp = dev_get_priv(dev); |
| |
| debug("** %s (%d)\n", __func__, __LINE__); |
| |
| tp->rtl_ops.disable(tp); |
| } |
| |
| int r8152_eth_send(struct udevice *dev, void *packet, int length) |
| { |
| struct r8152 *tp = dev_get_priv(dev); |
| |
| return r8152_send_common(&tp->ueth, packet, length); |
| } |
| |
| int r8152_eth_recv(struct udevice *dev, int flags, uchar **packetp) |
| { |
| struct r8152 *tp = dev_get_priv(dev); |
| struct ueth_data *ueth = &tp->ueth; |
| uint8_t *ptr; |
| int ret, len; |
| struct rx_desc *rx_desc; |
| u16 packet_len; |
| |
| len = usb_ether_get_rx_bytes(ueth, &ptr); |
| debug("%s: first try, len=%d\n", __func__, len); |
| if (!len) { |
| if (!(flags & ETH_RECV_CHECK_DEVICE)) |
| return -EAGAIN; |
| ret = usb_ether_receive(ueth, RTL8152_AGG_BUF_SZ); |
| if (ret) |
| return ret; |
| |
| len = usb_ether_get_rx_bytes(ueth, &ptr); |
| debug("%s: second try, len=%d\n", __func__, len); |
| } |
| |
| rx_desc = (struct rx_desc *)ptr; |
| packet_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK; |
| packet_len -= CRC_SIZE; |
| |
| if (packet_len > len - (sizeof(struct rx_desc) + CRC_SIZE)) { |
| debug("Rx: too large packet: %d\n", packet_len); |
| goto err; |
| } |
| |
| *packetp = ptr + sizeof(struct rx_desc); |
| return packet_len; |
| |
| err: |
| usb_ether_advance_rxbuf(ueth, -1); |
| return -ENOSPC; |
| } |
| |
| static int r8152_free_pkt(struct udevice *dev, uchar *packet, int packet_len) |
| { |
| struct r8152 *tp = dev_get_priv(dev); |
| |
| packet_len += sizeof(struct rx_desc) + CRC_SIZE; |
| packet_len = ALIGN(packet_len, 8); |
| usb_ether_advance_rxbuf(&tp->ueth, packet_len); |
| |
| return 0; |
| } |
| |
| static int r8152_write_hwaddr(struct udevice *dev) |
| { |
| struct eth_pdata *pdata = dev_get_platdata(dev); |
| struct r8152 *tp = dev_get_priv(dev); |
| |
| unsigned char enetaddr[8] = { 0 }; |
| |
| debug("** %s (%d)\n", __func__, __LINE__); |
| memcpy(enetaddr, pdata->enetaddr, ETH_ALEN); |
| |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG); |
| pla_ocp_write(tp, PLA_IDR, BYTE_EN_SIX_BYTES, 8, enetaddr); |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML); |
| |
| debug("MAC %pM\n", pdata->enetaddr); |
| return 0; |
| } |
| |
| int r8152_read_rom_hwaddr(struct udevice *dev) |
| { |
| struct eth_pdata *pdata = dev_get_platdata(dev); |
| struct r8152 *tp = dev_get_priv(dev); |
| |
| debug("** %s (%d)\n", __func__, __LINE__); |
| r8152_read_mac(tp, pdata->enetaddr); |
| return 0; |
| } |
| |
| static int r8152_eth_probe(struct udevice *dev) |
| { |
| struct usb_device *udev = dev_get_parent_priv(dev); |
| struct eth_pdata *pdata = dev_get_platdata(dev); |
| struct r8152 *tp = dev_get_priv(dev); |
| struct ueth_data *ueth = &tp->ueth; |
| int ret; |
| |
| tp->udev = udev; |
| r8152_read_mac(tp, pdata->enetaddr); |
| |
| r8152b_get_version(tp); |
| |
| ret = rtl_ops_init(tp); |
| if (ret) |
| return ret; |
| |
| tp->rtl_ops.init(tp); |
| tp->rtl_ops.up(tp); |
| |
| rtl8152_set_speed(tp, AUTONEG_ENABLE, |
| tp->supports_gmii ? SPEED_1000 : SPEED_100, |
| DUPLEX_FULL); |
| |
| return usb_ether_register(dev, ueth, RTL8152_AGG_BUF_SZ); |
| } |
| |
| static const struct eth_ops r8152_eth_ops = { |
| .start = r8152_eth_start, |
| .send = r8152_eth_send, |
| .recv = r8152_eth_recv, |
| .free_pkt = r8152_free_pkt, |
| .stop = r8152_eth_stop, |
| .write_hwaddr = r8152_write_hwaddr, |
| .read_rom_hwaddr = r8152_read_rom_hwaddr, |
| }; |
| |
| U_BOOT_DRIVER(r8152_eth) = { |
| .name = "r8152_eth", |
| .id = UCLASS_ETH, |
| .probe = r8152_eth_probe, |
| .ops = &r8152_eth_ops, |
| .priv_auto_alloc_size = sizeof(struct r8152), |
| .platdata_auto_alloc_size = sizeof(struct eth_pdata), |
| }; |
| |
| static const struct usb_device_id r8152_eth_id_table[] = { |
| /* Realtek */ |
| { USB_DEVICE(0x0bda, 0x8050) }, |
| { USB_DEVICE(0x0bda, 0x8152) }, |
| { USB_DEVICE(0x0bda, 0x8153) }, |
| |
| /* Samsung */ |
| { USB_DEVICE(0x04e8, 0xa101) }, |
| |
| /* Lenovo */ |
| { USB_DEVICE(0x17ef, 0x304f) }, |
| { USB_DEVICE(0x17ef, 0x3052) }, |
| { USB_DEVICE(0x17ef, 0x3054) }, |
| { USB_DEVICE(0x17ef, 0x3057) }, |
| { USB_DEVICE(0x17ef, 0x7205) }, |
| { USB_DEVICE(0x17ef, 0x720a) }, |
| { USB_DEVICE(0x17ef, 0x720b) }, |
| { USB_DEVICE(0x17ef, 0x720c) }, |
| |
| /* TP-LINK */ |
| { USB_DEVICE(0x2357, 0x0601) }, |
| |
| /* Nvidia */ |
| { USB_DEVICE(0x0955, 0x09ff) }, |
| |
| { } /* Terminating entry */ |
| }; |
| |
| U_BOOT_USB_DEVICE(r8152_eth, r8152_eth_id_table); |
| #endif /* CONFIG_DM_ETH */ |
| |