| /* |
| * (C) Copyright 2001 ELTEC Elektronik AG |
| * Frank Gottschling <fgottschling@eltec.de> |
| * |
| * ELTEC BAB PPC RAM initialization |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <config.h> |
| #include <74xx_7xx.h> |
| #include <mpc106.h> |
| #include <version.h> |
| |
| #include <ppc_asm.tmpl> |
| #include <ppc_defs.h> |
| |
| /* |
| * This following contains the entry code for the initialization code |
| * for the MPC 106, a PCI Bridge/Memory Controller. |
| * Register usage: |
| * r0 = ramtest scratch register, toggleError loop counter |
| * r1 = 0xfec0 0cf8 CONFIG_ADDRESS |
| * r2 = 0xfee0 0cfc CONFIG_DATA |
| * r3 = scratch register, subroutine argument and return value, ramtest size |
| * r4 = scratch register, spdRead clock mask, OutHex loop count |
| * r5 = ramtest scratch register |
| * r6 = toggleError 1st value, spdRead port mask |
| * r7 = toggleError 2nd value, ramtest scratch register, |
| * spdRead scratch register (0x00) |
| * r8 = ramtest scratch register, spdRead scratch register (0x80) |
| * r9 = ramtest scratch register, toggleError loop end, OutHex digit |
| * r10 = ramtest scratch register, spdWriteByte parameter, |
| * spdReadByte return value, printf pointer to COM1 |
| * r11 = startType |
| * r12 = ramtest scratch register, spdRead data mask |
| * r13 = pointer to message block |
| * r14 = pointer to GOT |
| * r15 = scratch register, SPD save |
| * r16 = bank0 size, total memory size |
| * r17 = bank1 size |
| * r18 = bank2 size |
| * r19 = bank3 size |
| * r20 = MCCR1, MSAR1 |
| * r21 = MCCR3, MEAR1 |
| * r22 = MCCR4, MBER |
| * r23 = EMSAR1 |
| * r24 = EMEAR1 |
| * r25 = save link register 1st level |
| * r26 = save link register 2nd level |
| * r27 = save link register 3rd level |
| * r30 = pointer to GPIO for spdRead |
| */ |
| |
| |
| .globl board_asm_init |
| board_asm_init: |
| /* |
| * setup pointer to message block |
| */ |
| mflr r25 /* save away link register */ |
| bl get_lnk_reg /* r3=addr of next instruction */ |
| subi r4, r3, 8 /* r4=board_asm_init addr */ |
| addi r13, r4, (MessageBlock-board_asm_init) |
| /* |
| * dcache_disable |
| */ |
| mfspr r3, HID0 |
| li r4, HID0_DCE |
| andc r3, r3, r4 |
| mr r2, r3 |
| ori r3, r3, HID0_DCI |
| sync |
| mtspr HID0, r3 |
| mtspr HID0, r2 |
| isync |
| sync |
| /* |
| * icache_disable |
| */ |
| mfspr r3, HID0 |
| li r4, 0 |
| ori r4, r4, HID0_ICE |
| andc r3, r3, r4 |
| sync |
| mtspr HID0, r3 |
| /* |
| * invalidate caches |
| */ |
| ori r3, r3, (HID0_ICE | HID0_ICFI | HID0_DCI | HID0_DCE) |
| or r4, r4, r3 |
| isync |
| mtspr HID0, r4 |
| andc r4, r4, r3 |
| isync |
| mtspr HID0, r4 |
| isync |
| /* |
| * icache_enable |
| */ |
| mfspr r3, HID0 |
| ori r3, r3, (HID0_ICE | HID0_ICFI) |
| sync |
| mtspr HID0, r3 |
| |
| lis r1, 0xfec0 |
| ori r1, r1, 0x0cf8 |
| lis r2, 0xfee0 |
| ori r2, r2, 0xcfc |
| |
| #ifdef CFG_ADDRESS_MAP_A |
| /* |
| * Switch to address map A if necessary. |
| */ |
| lis r3, MPC106_REG@h |
| ori r3, r3, PCI_PICR1 |
| stwbrx r3, 0, r1 |
| sync |
| lwbrx r4, 0, r2 |
| sync |
| lis r0, PICR1_XIO_MODE@h |
| ori r0, r0, PICR1_XIO_MODE@l |
| andc r4, r4, r0 |
| lis r0, PICR1_ADDRESS_MAP@h |
| ori r0, r0, PICR1_ADDRESS_MAP@l |
| or r4, r4, r0 |
| stwbrx r4, 0, r2 |
| sync |
| #endif |
| |
| /* |
| * Do the init for the SIO. |
| */ |
| bl .sioInit |
| |
| addi r3, r13, (MinitLogo-MessageBlock) |
| bl Printf |
| |
| addi r3, r13, (Mspd01-MessageBlock) |
| bl Printf |
| /* |
| * Memory cofiguration using SPD information stored on the SODIMMs |
| */ |
| li r17, 0 |
| li r18, 0 |
| li r19, 0 |
| |
| li r3, 0x0002 /* get RAM type from spd for bank0/1 */ |
| bl spdRead |
| |
| cmpi 0, 0, r3, -1 /* error ? */ |
| bne noSpdError |
| |
| addi r3, r13, (Mfail-MessageBlock) |
| bl Printf |
| |
| li r6, 0xe0 /* error codes in r6 and r7 */ |
| li r7, 0x00 |
| b toggleError /* fail - loop forever */ |
| |
| noSpdError: |
| mr r15, r3 /* save r3 */ |
| |
| addi r3, r13, (Mok-MessageBlock) |
| bl Printf |
| |
| cmpli 0, 0, r15, 0x0001 /* FPM ? */ |
| beq configFPM |
| cmpli 0, 0, r15, 0x0002 /* EDO ? */ |
| beq configEDO |
| cmpli 0, 0, r15, 0x0004 /* SDRAM ? */ |
| beq configSDRAM |
| |
| li r6, 0xe0 /* error codes in r6 and r7 */ |
| li r7, 0x01 |
| b toggleError /* fail - loop forever */ |
| |
| configSDRAM: |
| addi r3, r13, (MsdRam-MessageBlock) |
| bl Printf |
| /* |
| * set the Memory Configuration Reg. 1 |
| */ |
| li r3, 0x001f /* get bank size from spd bank0/1 */ |
| bl spdRead |
| |
| andi. r3, r3, 0x0038 |
| beq SD16MB2B |
| |
| li r3, 0x0011 /* get number of internal banks */ |
| /* from spd for bank0/1 */ |
| bl spdRead |
| |
| cmpli 0, 0, r3, 0x02 |
| beq SD64MB2B |
| |
| cmpli 0, 0, r3, 0x04 |
| beq SD64MB4B |
| |
| li r6, 0xe0 /* error codes in r6 and r7 */ |
| li r7, 0x02 |
| b toggleError /* fail - loop forever */ |
| |
| SD64MB2B: |
| li r20, 0x0005 /* 64-Mbit SDRAM 2 banks */ |
| b SDRow2nd |
| |
| SD64MB4B: |
| li r20, 0x0000 /* 64-Mbit SDRAM 4 banks */ |
| b SDRow2nd |
| |
| SD16MB2B: |
| li r20, 0x000f /* 16-Mbit SDRAM 2 banks */ |
| |
| SDRow2nd: |
| li r3, 0x0102 /* get RAM type spd for bank2/3 */ |
| bl spdRead |
| |
| cmpli 0, 0, r3, 0x0004 |
| bne S2D64MB4B /* bank2/3 isn't present or no SDRAM */ |
| |
| li r3, 0x011f /* get bank size from spd bank2/3 */ |
| bl spdRead |
| |
| andi. r3, r3, 0x0038 |
| beq S2D16MB2B |
| /* |
| * set the Memory Configuration Reg. 2 |
| */ |
| li r3, 0x0111 /* get number of internal banks */ |
| /* from spd for bank2/3 */ |
| bl spdRead |
| |
| cmpli 0, 0, r3, 0x02 |
| beq S2D64MB2B |
| |
| cmpli 0, 0, r3, 0x04 |
| beq S2D64MB4B |
| |
| li r6, 0xe0 /* error codes in r6 and r7 */ |
| li r7, 0x03 |
| b toggleError /* fail - loop forever */ |
| |
| S2D64MB2B: |
| ori r20, r20, 0x0050 /* 64-Mbit SDRAM 2 banks */ |
| b S2D64MB4B |
| |
| S2D16MB2B: |
| ori r20, r20, 0x00f0 /* 16-Mbit SDRAM 2 banks */ |
| |
| /* |
| * set the Memory Configuration Reg. 3 |
| */ |
| S2D64MB4B: |
| lis r21, 0x8630 /* BSTOPRE = 0x80, REFREC = 6, */ |
| /* RDLAT = 3 */ |
| |
| /* |
| * set the Memory Configuration Reg. 4 |
| */ |
| lis r22, 0x2430 /* PRETOACT = 2, ACTOPRE = 4, */ |
| /* WCBUF = 1, RCBUF = 1 */ |
| ori r22, r22, 0x2220 /* SDMODE = 0x022, ACTORW = 2 */ |
| |
| /* |
| * get the size of bank 0-3 |
| */ |
| li r3, 0x001f /* get bank size from spd bank0/1 */ |
| bl spdRead |
| |
| rlwinm r16, r3, 2, 24, 29 /* calculate size in MByte */ |
| /* (128 MB max.) */ |
| |
| li r3, 0x0005 /* get number of banks from spd */ |
| /* for bank0/1 */ |
| bl spdRead |
| |
| cmpi 0, 0, r3, 2 /* 2 banks ? */ |
| bne SDRAMnobank1 |
| |
| mr r17, r16 |
| |
| SDRAMnobank1: |
| addi r3, r13, (Mspd23-MessageBlock) |
| bl Printf |
| |
| li r3, 0x0102 /* get RAM type spd for bank2/3 */ |
| bl spdRead |
| |
| cmpli 0, 0, r3, 0x0001 /* FPM ? */ |
| bne noFPM23 /* handle as EDO */ |
| addi r3, r13, (Mok-MessageBlock) |
| bl Printf |
| addi r3, r13, (MfpmRam-MessageBlock) |
| bl Printf |
| b configRAMcommon |
| noFPM23: |
| cmpli 0, 0, r3, 0x0002 /* EDO ? */ |
| bne noEDO23 |
| addi r3, r13, (Mok-MessageBlock) |
| bl Printf |
| addi r3, r13, (MedoRam-MessageBlock) |
| bl Printf |
| b configRAMcommon |
| noEDO23: |
| cmpli 0, 0, r3, 0x0004 /* SDRAM ? */ |
| bne noSDRAM23 |
| addi r3, r13, (Mok-MessageBlock) |
| bl Printf |
| addi r3, r13, (MsdRam-MessageBlock) |
| bl Printf |
| b configSDRAM23 |
| noSDRAM23: |
| addi r3, r13, (Mna-MessageBlock) |
| bl Printf |
| b configRAMcommon /* bank2/3 isn't present or no SDRAM */ |
| |
| configSDRAM23: |
| li r3, 0x011f /* get bank size from spd bank2/3 */ |
| bl spdRead |
| |
| rlwinm r18, r3, 2, 24, 29 /* calculate size in MByte */ |
| /* (128 MB max.) */ |
| |
| li r3, 0x0105 /* get number of banks from */ |
| /* spd bank0/1 */ |
| bl spdRead |
| |
| cmpi 0, 0, r3, 2 /* 2 banks ? */ |
| bne SDRAMnobank3 |
| |
| mr r19, r18 |
| |
| SDRAMnobank3: |
| b configRAMcommon |
| |
| configFPM: |
| addi r3, r13, (MfpmRam-MessageBlock) |
| bl Printf |
| b configEDO0 |
| /* |
| * set the Memory Configuration Reg. 1 |
| */ |
| configEDO: |
| addi r3, r13, (MedoRam-MessageBlock) |
| bl Printf |
| configEDO0: |
| lis r20, MCCR1_TYPE_EDO@h |
| |
| getSpdRowBank01: |
| li r3, 0x0003 /* get number of row bits from */ |
| /* spd from bank0/1 */ |
| bl spdRead |
| ori r20, r20, (MCCR1_BK0_9BITS | MCCR1_BK1_9BITS) |
| cmpli 0, 0, r3, 0x0009 /* bank0 - 9 row bits */ |
| beq getSpdRowBank23 |
| |
| ori r20, r20, (MCCR1_BK0_10BITS | MCCR1_BK1_10BITS) |
| cmpli 0, 0, r3, 0x000a /* bank0 - 10 row bits */ |
| beq getSpdRowBank23 |
| |
| ori r20, r20, (MCCR1_BK0_11BITS | MCCR1_BK1_11BITS) |
| cmpli 0, 0, r3, 0x000b /* bank0 - 11 row bits */ |
| beq getSpdRowBank23 |
| |
| ori r20, r20, (MCCR1_BK0_12BITS | MCCR1_BK1_12BITS) |
| cmpli 0, 0, r3, 0x000c /* bank0 - 12 row bits */ |
| beq getSpdRowBank23 |
| |
| cmpli 0, 0, r3, 0x000d /* bank0 - 13 row bits */ |
| beq getSpdRowBank23 |
| |
| li r6, 0xe0 /* error codes in r6 and r7 */ |
| li r7, 0x10 |
| b toggleError /* fail - loop forever */ |
| |
| getSpdRowBank23: |
| li r3, 0x0103 /* get number of row bits from */ |
| /* spd for bank2/3 */ |
| bl spdRead |
| |
| ori r20, r20, (MCCR1_BK2_9BITS | MCCR1_BK3_9BITS) |
| cmpli 0, 0, r3, 0x0009 /* bank0 - 9 row bits */ |
| beq writeRowBits |
| |
| ori r20, r20, (MCCR1_BK2_10BITS | MCCR1_BK3_10BITS) |
| cmpli 0, 0, r3, 0x000a /* bank0 - 10 row bits */ |
| beq writeRowBits |
| |
| ori r20, r20, (MCCR1_BK2_11BITS | MCCR1_BK3_11BITS) |
| cmpli 0, 0, r3, 0x000b /* bank0 - 11 row bits */ |
| beq writeRowBits |
| |
| ori r20, r20, (MCCR1_BK2_12BITS | MCCR1_BK3_12BITS) |
| |
| /* |
| * set the Memory Configuration Reg. 3 |
| */ |
| writeRowBits: |
| lis r21, 0x000a /* CPX = 1, RAS6P = 4 */ |
| ori r21, r21, 0x2293 /* CAS5 = 2, CP4 = 1, */ |
| /* CAS3 = 2, RCD2 = 2, RP = 3 */ |
| /* |
| * set the Memory Configuration Reg. 4 |
| */ |
| lis r22, 0x0010 /* all SDRAM parameter 0, */ |
| /* WCBUF flow through, */ |
| /* RCBUF registered */ |
| /* |
| * get the size of bank 0-3 |
| */ |
| li r3, 0x0003 /* get row bits from spd bank0/1 */ |
| bl spdRead |
| |
| li r16, 0 /* bank size is: */ |
| /* (8*2^row*2^column)/0x100000 MB */ |
| ori r16, r16, 0x8000 |
| rlwnm r16, r16, r3, 0, 31 |
| |
| li r3, 0x0004 /* get column bits from spd bank0/1 */ |
| bl spdRead |
| |
| rlwnm r16, r16, r3, 0, 31 |
| |
| li r3, 0x0005 /* get number of banks from */ |
| /* spd for bank0/1 */ |
| bl spdRead |
| |
| cmpi 0, 0, r3, 2 /* 2 banks ? */ |
| bne EDOnobank1 |
| |
| mr r17, r16 |
| |
| EDOnobank1: |
| addi r3, r13, (Mspd23-MessageBlock) |
| bl Printf |
| |
| li r3, 0x0102 /* get RAM type spd for bank2/3 */ |
| bl spdRead |
| |
| cmpli 0, 0, r3, 0x0001 /* FPM ? */ |
| bne noFPM231 /* handle as EDO */ |
| addi r3, r13, (Mok-MessageBlock) |
| bl Printf |
| addi r3, r13, (MfpmRam-MessageBlock) |
| bl Printf |
| b EDObank2 |
| noFPM231: |
| cmpli 0, 0, r3, 0x0002 /* EDO ? */ |
| bne noEDO231 |
| addi r3, r13, (Mok-MessageBlock) |
| bl Printf |
| addi r3, r13, (MedoRam-MessageBlock) |
| bl Printf |
| b EDObank2 |
| noEDO231: |
| cmpli 0, 0, r3, 0x0004 /* SDRAM ? */ |
| bne noSDRAM231 |
| addi r3, r13, (Mok-MessageBlock) |
| bl Printf |
| addi r3, r13, (MsdRam-MessageBlock) |
| bl Printf |
| b configRAMcommon |
| noSDRAM231: |
| addi r3, r13, (Mfail-MessageBlock) |
| bl Printf |
| b configRAMcommon /* bank2/3 isn't present or no SDRAM */ |
| |
| EDObank2: |
| li r3, 0x0103 /* get row bits from spd for bank2/3 */ |
| bl spdRead |
| |
| li r18, 0 /* bank size is: */ |
| /* (8*2^row*2^column)/0x100000 MB */ |
| ori r18, r18, 0x8000 |
| rlwnm r18, r18, r3, 0, 31 |
| |
| li r3, 0x0104 /* get column bits from spd bank2/3 */ |
| bl spdRead |
| |
| rlwnm r18, r18, r3, 0, 31 |
| |
| li r3, 0x0105 /* get number of banks from */ |
| /* spd for bank2/3 */ |
| bl spdRead |
| |
| cmpi 0, 0, r3, 2 /* 2 banks ? */ |
| bne configRAMcommon |
| |
| mr r19, r18 |
| |
| configRAMcommon: |
| lis r1, MPC106_REG_ADDR@h |
| ori r1, r1, MPC106_REG_ADDR@l |
| lis r2, MPC106_REG_DATA@h |
| ori r2, r2, MPC106_REG_DATA@l |
| |
| li r0, 0 |
| |
| /* |
| * If we are already running in RAM (debug mode), we should |
| * NOT reset the MEMGO flag. Otherwise we will stop all memory |
| * accesses. |
| */ |
| #ifdef IN_RAM |
| lis r4, MCCR1_MEMGO@h |
| ori r4, r4, MCCR1_MEMGO@l |
| or r20, r20, r4 |
| #endif |
| |
| /* |
| * set the Memory Configuration Reg. 1 |
| */ |
| lis r3, MPC106_REG@h /* start building new reg number */ |
| ori r3, r3, MPC106_MCCR1 /* register number 0xf0 */ |
| stwbrx r3, r0, r1 /* write this value to CONFIG_ADDR */ |
| eieio /* make sure mem. access is complete */ |
| stwbrx r20, r0, r2 /* write data to CONFIG_DATA */ |
| /* |
| * set the Memory Configuration Reg. 3 |
| */ |
| lis r3, MPC106_REG@h /* start building new reg number */ |
| ori r3, r3, MPC106_MCCR3 /* register number 0xf8 */ |
| stwbrx r3, r0, r1 /* write this value to CONFIG_ADDR */ |
| eieio /* make sure mem. access is complete */ |
| stwbrx r21, r0, r2 /* write data to CONFIG_DATA */ |
| /* |
| * set the Memory Configuration Reg. 4 |
| */ |
| lis r3, MPC106_REG@h /* start building new reg number */ |
| ori r3, r3, MPC106_MCCR4 /* register number 0xfc */ |
| stwbrx r3, r0, r1 /* write this value to CONFIG_ADDR */ |
| eieio /* make sure mem. access is complete */ |
| stwbrx r22, r0, r2 /* write data to CONFIG_DATA */ |
| /* |
| * set the memory boundary registers for bank 0-3 |
| */ |
| li r20, 0 |
| li r23, 0 |
| li r24, 0 |
| subi r21, r16, 1 /* calculate end address bank0 */ |
| li r22, (MBER_BANK0) |
| |
| cmpi 0, 0, r17, 0 /* bank1 present ? */ |
| beq nobank1 |
| |
| rlwinm r3, r16, 8, 16, 23 /* calculate start address of bank1 */ |
| or r20, r20, r3 |
| add r16, r16, r17 /* add to total memory size */ |
| subi r3, r16, 1 /* calculate end address of bank1 */ |
| rlwinm r3, r3, 8, 16, 23 |
| or r21, r21, r3 |
| ori r22, r22, (MBER_BANK1) /* enable bank1 */ |
| b bank2 |
| |
| nobank1: |
| ori r23, r23, 0x0300 /* set bank1 start to unused area */ |
| ori r24, r24, 0x0300 /* set bank1 end to unused area */ |
| |
| bank2: |
| cmpi 0, 0, r18, 0 /* bank2 present ? */ |
| beq nobank2 |
| |
| andi. r3, r16, 0x00ff /* calculate start address of bank2 */ |
| andi. r4, r16, 0x0300 |
| rlwinm r3, r3, 16, 8, 15 |
| or r20, r20, r3 |
| rlwinm r3, r4, 8, 8, 15 |
| or r23, r23, r3 |
| add r16, r16, r18 /* add to total memory size */ |
| subi r3, r16, 1 /* calculate end address of bank2 */ |
| andi. r4, r3, 0x0300 |
| andi. r3, r3, 0x00ff |
| rlwinm r3, r3, 16, 8, 15 |
| or r21, r21, r3 |
| rlwinm r3, r4, 8, 8, 15 |
| or r24, r24, r3 |
| ori r22, r22, (MBER_BANK2) /* enable bank2 */ |
| b bank3 |
| |
| nobank2: |
| lis r3, 0x0003 |
| or r23, r23, r3 /* set bank2 start to unused area */ |
| or r24, r24, r3 /* set bank2 end to unused area */ |
| |
| bank3: |
| cmpi 0, 0, r19, 0 /* bank3 present ? */ |
| beq nobank3 |
| |
| andi. r3, r16, 0x00ff /* calculate start address of bank3 */ |
| andi. r4, r16, 0x0300 |
| rlwinm r3, r3, 24, 0, 7 |
| or r20, r20, r3 |
| rlwinm r3, r4, 16, 0, 7 |
| or r23, r23, r3 |
| add r16, r16, r19 /* add to total memory size */ |
| subi r3, r16, 1 /* calculate end address of bank3 */ |
| andi. r4, r3, 0x0300 |
| andi. r3, r3, 0x00ff |
| rlwinm r3, r3, 24, 0, 7 |
| or r21, r21, r3 |
| rlwinm r3, r4, 16, 0, 7 |
| or r24, r24, r3 |
| ori r22, r22, (MBER_BANK3) /* enable bank3 */ |
| b writebound |
| |
| nobank3: |
| lis r3, 0x0300 |
| or r23, r23, r3 /* set bank3 start to unused area */ |
| or r24, r24, r3 /* set bank3 end to unused area */ |
| |
| writebound: |
| lis r3, MPC106_REG@h /* start building new reg number */ |
| ori r3, r3, MPC106_MSAR1 /* register number 0x80 */ |
| stwbrx r3, r0, r1 /* write this value to CONFIG_ADDR */ |
| eieio /* make sure mem. access is complete */ |
| stwbrx r20, r0, r2 /* write data to CONFIG_DATA */ |
| |
| lis r3, MPC106_REG@h /* start building new reg number */ |
| ori r3, r3, MPC106_MEAR1 /* register number 0x90 */ |
| stwbrx r3, r0, r1 /* write this value to CONFIG_ADDR */ |
| eieio /* make sure mem. access is complete */ |
| stwbrx r21, r0, r2 /* write data to CONFIG_DATA */ |
| |
| lis r3, MPC106_REG@h /* start building new reg number */ |
| ori r3, r3, MPC106_EMSAR1 /* register number 0x88 */ |
| stwbrx r3, r0, r1 /* write this value to CONFIG_ADDR */ |
| eieio /* make sure mem. access is complete */ |
| stwbrx r23, r0, r2 /* write data to CONFIG_DATA */ |
| |
| lis r3, MPC106_REG@h /* start building new reg number */ |
| ori r3, r3, MPC106_EMEAR1 /* register number 0x98 */ |
| stwbrx r3, r0, r1 /* write this value to CONFIG_ADDR */ |
| eieio /* make sure mem. access is complete */ |
| stwbrx r24, r0, r2 /* write data to CONFIG_DATA */ |
| |
| /* |
| * set boundaries of unused banks to unused address space |
| */ |
| lis r4, 0x0303 |
| ori r4, r4, 0x0303 /* bank 4-7 start and end adresses */ |
| lis r3, MPC106_REG@h /* start building new reg number */ |
| ori r3, r3, MPC106_EMSAR2 /* register number 0x8C */ |
| stwbrx r3, r0, r1 /* write this value to CONFIG_ADDR */ |
| eieio /* make sure mem. access is complete */ |
| stwbrx r4, r0, r2 /* write data to CONFIG_DATA */ |
| |
| lis r3, MPC106_REG@h /* start building new reg number */ |
| ori r3, r3, MPC106_EMEAR2 /* register number 0x9C */ |
| stwbrx r3, r0, r1 /* write this value to CONFIG_ADDR */ |
| eieio /* make sure mem. access is complete */ |
| stwbrx r4, r0, r2 /* write data to CONFIG_DATA */ |
| |
| /* |
| * set the Memory Configuration Reg. 2 |
| */ |
| lis r3, MPC106_REG@h /* start building new reg number */ |
| ori r3, r3, MPC106_MCCR2 /* register number 0xf4 */ |
| stwbrx r3, r0, r1 /* write this value to CONFIG_ADDR */ |
| eieio /* make sure mem. access is complete */ |
| |
| li r3, 0x000c /* get refresh from spd for bank0/1 */ |
| bl spdRead |
| |
| cmpi 0, 0, r3, -1 /* error ? */ |
| bne common1 |
| |
| li r6, 0xe0 /* error codes in r6 and r7 */ |
| li r7, 0x20 |
| b toggleError /* fail - loop forever */ |
| |
| common1: |
| andi. r15, r3, 0x007f /* mask selfrefresh bit */ |
| li r3, 0x010c /* get refresh from spd for bank2/3 */ |
| bl spdRead |
| |
| cmpi 0, 0, r3, -1 /* error ? */ |
| beq common2 |
| andi. r3, r3, 0x007f /* mask selfrefresh bit */ |
| cmp 0, 0, r3, r15 /* find the lower */ |
| blt common3 |
| |
| common2: |
| mr r3, r15 |
| |
| common3: |
| li r4, 0x1010 /* refesh cycle 1028 clocks */ |
| /* left shifted 2 */ |
| cmpli 0, 0, r3, 0x0000 /* 15.6 us ? */ |
| beq writeRefresh |
| |
| li r4, 0x0808 /* refesh cycle 514 clocks */ |
| /* left shifted 2 */ |
| cmpli 0, 0, r3, 0x0002 /* 7.8 us ? */ |
| beq writeRefresh |
| |
| li r4, 0x2020 /* refesh cycle 2056 clocks */ |
| /* left shifted 2 */ |
| cmpli 0, 0, r3, 0x0003 /* 31.3 us ? */ |
| beq writeRefresh |
| |
| li r4, 0x4040 /* refesh cycle 4112 clocks */ |
| /* left shifted 2 */ |
| cmpli 0, 0, r3, 0x0004 /* 62.5 us ? */ |
| beq writeRefresh |
| |
| li r4, 0 |
| ori r4, r4, 0x8080 /* refesh cycle 8224 clocks */ |
| /* left shifted 2 */ |
| cmpli 0, 0, r3, 0x0005 /* 125 us ? */ |
| beq writeRefresh |
| |
| li r6, 0xe0 /* error codes in r6 and r7 */ |
| li r7, 0x21 |
| b toggleError /* fail - loop forever */ |
| |
| writeRefresh: |
| stwbrx r4, r0, r2 /* write data to CONFIG_DATA */ |
| |
| /* |
| * DRAM BANKS SHOULD BE ENABLED |
| */ |
| addi r3, r13, (Mactivate-MessageBlock) |
| bl Printf |
| mr r3, r16 |
| bl OutDec |
| addi r3, r13, (Mmbyte-MessageBlock) |
| bl Printf |
| |
| lis r3, MPC106_REG@h /* start building new reg number */ |
| ori r3, r3, MPC106_MBER /* register number 0xa0 */ |
| stwbrx r3, r0, r1 /* write this value to CONFIG_ADDR */ |
| eieio /* make sure mem. access is complete */ |
| stb r22, 0(r2) /* write data to CONFIG_DATA */ |
| li r8, 0x63 /* PGMAX = 99 */ |
| stb r8, 3(r2) /* write data to CONFIG_DATA */ |
| |
| /* |
| * DRAM SHOULD NOW BE CONFIGURED AND ENABLED |
| * MUST WAIT 200us BEFORE ACCESSING |
| */ |
| li r0, 0x7800 |
| mtctr r0 |
| |
| wait200us: |
| bdnz wait200us |
| |
| lis r3, MPC106_REG@h /* start building new reg number */ |
| ori r3, r3, MPC106_MCCR1 /* register number 0xf0 */ |
| stwbrx r3, r0, r1 /* write this value to CONFIG_ADDR */ |
| eieio /* make sure mem. access is complete */ |
| |
| lwbrx r4, r0, r2 /* load r4 from CONFIG_DATA */ |
| |
| lis r0, MCCR1_MEMGO@h /* MEMGO=1 */ |
| ori r0, r0, MCCR1_MEMGO@l |
| or r4, r4, r0 /* set the MEMGO bit */ |
| stwbrx r4, r0, r2 /* write mdfd data to CONFIG_DATA */ |
| |
| li r0, 0x7000 |
| mtctr r0 |
| |
| wait8ref: |
| bdnz wait8ref |
| |
| addi r3, r13, (Mok-MessageBlock) |
| bl Printf |
| |
| mtlr r25 |
| blr |
| |
| /* |
| * Infinite loop called in case of an error during RAM initialisation. |
| * error codes in r6 and r7. |
| */ |
| toggleError: |
| li r0, 0 |
| lis r9, 127 |
| ori r9, r9, 65535 |
| toggleError1: |
| addic r0, r0, 1 |
| cmpw cr1, r0, r9 |
| ble cr1, toggleError1 |
| li r0, 0 |
| lis r9, 127 |
| ori r9, r9, 65535 |
| toggleError2: |
| addic r0, r0, 1 |
| cmpw cr1, r0, r9 |
| ble cr1, toggleError2 |
| b toggleError |
| |
| |
| /****************************************************************************** |
| * This function performs a basic initialisation of the superio chip |
| * to enable basic console output and SPD access during RAM initialisation. |
| * |
| * Upon completion, SIO resource registers are mapped as follows: |
| * Resource Enabled Address |
| * UART1 Yes 3F8-3FF COM1 |
| * UART2 Yes 2F8-2FF COM2 |
| * GPIO Yes 220-227 |
| */ |
| .set SIO_LUNINDEX, 0x07 /* SIO LUN index register */ |
| .set SIO_CNFG1, 0x21 /* SIO configuration #1 register */ |
| .set SIO_PCSCI, 0x23 /* SIO PCS configuration index reg */ |
| .set SIO_PCSCD, 0x24 /* SIO PCS configuration data reg */ |
| .set SIO_ACTIVATE, 0x30 /* SIO activate register */ |
| .set SIO_IOBASEHI, 0x60 /* SIO I/O port base address, 15:8 */ |
| .set SIO_IOBASELO, 0x61 /* SIO I/O port base address, 7:0 */ |
| .set SIO_LUNENABLE, 0x01 /* SIO LUN enable */ |
| |
| .sioInit: |
| mfspr r7, 8 /* save link register */ |
| |
| .sioInit_87308: |
| |
| /* |
| * Get base addr of ISA I/O space |
| */ |
| lis r6, CFG_ISA_IO@h |
| ori r6, r6, CFG_ISA_IO@l |
| |
| /* |
| * Set offset to base address for config registers. |
| */ |
| #if defined(CFG_NS87308_BADDR_0x) |
| addi r4, r0, 0x0279 |
| #elif defined(CFG_NS87308_BADDR_10) |
| addi r4, r0, 0x015C |
| #elif defined(CFG_NS87308_BADDR_11) |
| addi r4, r0, 0x002E |
| #endif |
| add r6, r6, r4 /* add offset to base */ |
| or r3, r6, r6 /* make a copy */ |
| |
| /* |
| * PMC (LUN 8) |
| */ |
| addi r4, r0, SIO_LUNINDEX /* select PMC LUN */ |
| addi r5, r0, 0x8 |
| bl .sio_bw |
| addi r4, r0, SIO_IOBASEHI /* initialize PMC address to 0x460 */ |
| addi r5, r0, 0x04 |
| bl .sio_bw |
| addi r4, r0, SIO_IOBASELO |
| addi r5, r0, 0x60 |
| bl .sio_bw |
| addi r4, r0, SIO_ACTIVATE /* enable PMC */ |
| addi r5, r0, SIO_LUNENABLE |
| bl .sio_bw |
| |
| lis r8, CFG_ISA_IO@h |
| ori r8, r8, 0x0460 |
| li r9, 0x03 |
| stb r9, 0(r8) /* select PMC2 register */ |
| eieio |
| li r9, 0x00 |
| stb r9, 1(r8) /* SuperI/O clock src: 24MHz via X1 */ |
| eieio |
| |
| /* |
| * map UART1 (LUN 6) or UART2 (LUN 5) to COM1 (0x3F8) |
| */ |
| addi r4, r0, SIO_LUNINDEX /* select COM1 LUN */ |
| addi r5, r0, 0x6 |
| bl .sio_bw |
| |
| addi r4, r0, SIO_IOBASEHI /* initialize COM1 address to 0x3F8 */ |
| addi r5, r0, 0x03 |
| bl .sio_bw |
| |
| addi r4, r0, SIO_IOBASELO |
| addi r5, r0, 0xF8 |
| bl .sio_bw |
| |
| addi r4, r0, SIO_ACTIVATE /* enable COM1 */ |
| addi r5, r0, SIO_LUNENABLE |
| bl .sio_bw |
| |
| /* |
| * Init COM1 for polled output |
| */ |
| lis r8, CFG_ISA_IO@h |
| ori r8, r8, 0x03f8 |
| li r9, 0x00 |
| stb r9, 1(r8) /* int disabled */ |
| eieio |
| li r9, 0x00 |
| stb r9, 4(r8) /* modem ctrl */ |
| eieio |
| li r9, 0x80 |
| stb r9, 3(r8) /* link ctrl, bank select */ |
| eieio |
| li r9, 115200/CONFIG_BAUDRATE |
| stb r9, 0(r8) /* baud rate (LSB)*/ |
| eieio |
| rotrwi r9, r9, 8 |
| stb r9, 1(r8) /* baud rate (MSB) */ |
| eieio |
| li r9, 0x03 |
| stb r9, 3(r8) /* 8 data bits, 1 stop bit, */ |
| /* no parity */ |
| eieio |
| li r9, 0x0b |
| stb r9, 4(r8) /* enable the receiver and transmitter */ |
| eieio |
| |
| waitEmpty: |
| lbz r9, 5(r8) /* transmit empty */ |
| andi. r9, r9, 0x40 |
| beq waitEmpty |
| li r9, 0x47 |
| stb r9, 3(r8) /* send break, 8 data bits, */ |
| /* 2 stop bits, no parity */ |
| eieio |
| |
| lis r0, 0x0001 |
| mtctr r0 |
| |
| waitCOM1: |
| lwz r0, 5(r8) /* load from port for delay */ |
| bdnz waitCOM1 |
| |
| waitEmpty1: |
| lbz r9, 5(r8) /* transmit empty */ |
| andi. r9, r9, 0x40 |
| beq waitEmpty1 |
| li r9, 0x07 |
| stb r9, 3(r8) /* 8 data bits, 2 stop bits, */ |
| /* no parity */ |
| eieio |
| |
| /* |
| * GPIO (LUN 7) |
| */ |
| addi r4, r0, SIO_LUNINDEX /* select GPIO LUN */ |
| addi r5, r0, 0x7 |
| bl .sio_bw |
| |
| addi r4, r0, SIO_IOBASEHI /* initialize GPIO address to 0x220 */ |
| addi r5, r0, 0x02 |
| bl .sio_bw |
| |
| addi r4, r0, SIO_IOBASELO |
| addi r5, r0, 0x20 |
| bl .sio_bw |
| |
| addi r4, r0, SIO_ACTIVATE /* enable GPIO */ |
| addi r5, r0, SIO_LUNENABLE |
| bl .sio_bw |
| |
| .sioInit_done: |
| |
| /* |
| * Get base addr of ISA I/O space |
| */ |
| lis r3, CFG_ISA_IO@h |
| ori r3, r3, CFG_ISA_IO@l |
| |
| addi r3, r3, 0x015C /* adjust to superI/O 87308 base */ |
| or r6, r3, r3 /* make a copy */ |
| /* |
| * CS0 |
| */ |
| addi r4, r0, SIO_PCSCI /* select PCSCIR */ |
| addi r5, r0, 0x00 |
| bl .sio_bw |
| addi r4, r0, SIO_PCSCD /* select PCSCDR */ |
| addi r5, r0, 0x00 |
| bl .sio_bw |
| addi r4, r0, SIO_PCSCI /* select PCSCIR */ |
| addi r5, r0, 0x01 |
| bl .sio_bw |
| addi r4, r0, SIO_PCSCD /* select PCSCDR */ |
| addi r5, r0, 0x76 |
| bl .sio_bw |
| addi r4, r0, SIO_PCSCI /* select PCSCIR */ |
| addi r5, r0, 0x02 |
| bl .sio_bw |
| addi r4, r0, SIO_PCSCD /* select PCSCDR */ |
| addi r5, r0, 0x40 |
| bl .sio_bw |
| /* |
| * CS1 |
| */ |
| addi r4, r0, SIO_PCSCI /* select PCSCIR */ |
| addi r5, r0, 0x05 |
| bl .sio_bw |
| addi r4, r0, SIO_PCSCD /* select PCSCDR */ |
| addi r5, r0, 0x00 |
| bl .sio_bw |
| addi r4, r0, SIO_PCSCI /* select PCSCIR */ |
| addi r5, r0, 0x05 |
| bl .sio_bw |
| addi r4, r0, SIO_PCSCD /* select PCSCDR */ |
| addi r5, r0, 0x70 |
| bl .sio_bw |
| addi r4, r0, SIO_PCSCI /* select PCSCIR */ |
| addi r5, r0, 0x06 |
| bl .sio_bw |
| addi r4, r0, SIO_PCSCD /* select PCSCDR */ |
| addi r5, r0, 0x1C |
| bl .sio_bw |
| /* |
| * CS2 |
| */ |
| addi r4, r0, SIO_PCSCI /* select PCSCIR */ |
| addi r5, r0, 0x08 |
| bl .sio_bw |
| addi r4, r0, SIO_PCSCD /* select PCSCDR */ |
| addi r5, r0, 0x00 |
| bl .sio_bw |
| addi r4, r0, SIO_PCSCI /* select PCSCIR */ |
| addi r5, r0, 0x09 |
| bl .sio_bw |
| addi r4, r0, SIO_PCSCD /* select PCSCDR */ |
| addi r5, r0, 0x71 |
| bl .sio_bw |
| addi r4, r0, SIO_PCSCI /* select PCSCIR */ |
| addi r5, r0, 0x0A |
| bl .sio_bw |
| addi r4, r0, SIO_PCSCD /* select PCSCDR */ |
| addi r5, r0, 0x1C |
| bl .sio_bw |
| |
| mtspr 8, r7 /* restore link register */ |
| bclr 20, 0 /* return to caller */ |
| |
| /* |
| * this function writes a register to the SIO chip |
| */ |
| .sio_bw: |
| stb r4, 0(r3) /* write index register with register offset */ |
| eieio |
| sync |
| stb r5, 1(r3) /* 1st write */ |
| eieio |
| sync |
| stb r5, 1(r3) /* 2nd write */ |
| eieio |
| sync |
| bclr 20, 0 /* return to caller */ |
| /* |
| * this function reads a register from the SIO chip |
| */ |
| .sio_br: |
| stb r4, 0(r3) /* write index register with register offset */ |
| eieio |
| sync |
| lbz r3, 1(r3) /* retrieve specified reg offset contents */ |
| eieio |
| sync |
| bclr 20, 0 /* return to caller */ |
| |
| /* |
| * Print a message to COM1 in polling mode |
| * r10=COM1 port, r3=(char*)string |
| */ |
| .globl Printf |
| Printf: |
| lis r10, CFG_ISA_IO@h /* COM1 port */ |
| ori r10, r10, 0x03f8 |
| |
| WaitChr: |
| lbz r0, 5(r10) /* read link status */ |
| eieio |
| andi. r0, r0, 0x40 /* mask transmitter empty bit */ |
| beq cr0, WaitChr /* wait till empty */ |
| lbzx r0, r0, r3 /* get char */ |
| stb r0, 0(r10) /* write to transmit reg */ |
| eieio |
| addi r3, r3, 1 /* next char */ |
| lbzx r0, r0, r3 /* get char */ |
| cmpwi cr1, r0, 0 /* end of string ? */ |
| bne cr1, WaitChr |
| blr |
| |
| /* |
| * Print 8/4/2 digits hex value to COM1 in polling mode |
| * r10=COM1 port, r3=val |
| */ |
| OutHex2: |
| li r9, 4 /* shift reg for 2 digits */ |
| b OHstart |
| OutHex4: |
| li r9, 12 /* shift reg for 4 digits */ |
| b OHstart |
| .globl OutHex |
| OutHex: |
| li r9, 28 /* shift reg for 8 digits */ |
| OHstart: |
| lis r10, CFG_ISA_IO@h /* COM1 port */ |
| ori r10, r10, 0x03f8 |
| OutDig: |
| lbz r0, 5(r10) /* read link status */ |
| eieio |
| andi. r0, r0, 0x40 /* mask transmitter empty bit */ |
| beq cr0, OutDig |
| sraw r0, r3, r9 |
| clrlwi r0, r0, 28 |
| cmpwi cr1, r0, 9 |
| ble cr1, digIsNum |
| addic r0, r0, 55 |
| b nextDig |
| digIsNum: |
| addic r0, r0, 48 |
| nextDig: |
| stb r0, 0(r10) /* write to transmit reg */ |
| eieio |
| addic. r9, r9, -4 |
| bge OutDig |
| blr |
| /* |
| * Print 3 digits hdec value to COM1 in polling mode |
| * r10=COM1 port, r3=val, r7=x00, r8=x0, r9=x, r0, r6=scratch |
| */ |
| .globl OutDec |
| OutDec: |
| li r6, 10 |
| divwu r0, r3, r6 /* r0 = r3 / 10, r9 = r3 mod 10 */ |
| mullw r10, r0, r6 |
| subf r9, r10, r3 |
| |
| mr r3, r0 |
| divwu r0, r3, r6 /* r0 = r3 / 10, r8 = r3 mod 10 */ |
| mullw r10, r0, r6 |
| subf r8, r10, r3 |
| |
| mr r3, r0 |
| divwu r0, r3, r6 /* r0 = r3 / 10, r7 = r3 mod 10 */ |
| mullw r10, r0, r6 |
| subf r7, r10, r3 |
| |
| lis r10, CFG_ISA_IO@h /* COM1 port */ |
| ori r10, r10, 0x03f8 |
| |
| or. r7, r7, r7 |
| bne noblank1 |
| li r3, 0x20 |
| b OutDec4 |
| |
| noblank1: |
| addi r3, r7, 48 /* convert to ASCII */ |
| |
| OutDec4: |
| lbz r0, 0(r13) /* slow down dummy read */ |
| lbz r0, 5(r10) /* read link status */ |
| eieio |
| andi. r0, r0, 0x40 /* mask transmitter empty bit */ |
| beq cr0, OutDec4 |
| stb r3, 0(r10) /* x00 to transmit */ |
| eieio |
| |
| or. r7, r7, r8 |
| beq OutDec5 |
| |
| addi r3, r8, 48 /* convert to ASCII */ |
| OutDec5: |
| lbz r0, 0(r13) /* slow down dummy read */ |
| lbz r0, 5(r10) /* read link status */ |
| eieio |
| andi. r0, r0, 0x40 /* mask transmitter empty bit */ |
| beq cr0, OutDec5 |
| stb r3, 0(r10) /* x0 to transmit */ |
| eieio |
| |
| addi r3, r9, 48 /* convert to ASCII */ |
| OutDec6: |
| lbz r0, 0(r13) /* slow down dummy read */ |
| lbz r0, 5(r10) /* read link status */ |
| eieio |
| andi. r0, r0, 0x40 /* mask transmitter empty bit */ |
| beq cr0, OutDec6 |
| stb r3, 0(r10) /* x to transmit */ |
| eieio |
| blr |
| /* |
| * Print a char to COM1 in polling mode |
| * r10=COM1 port, r3=char |
| */ |
| .globl OutChr |
| OutChr: |
| lis r10, CFG_ISA_IO@h /* COM1 port */ |
| ori r10, r10, 0x03f8 |
| |
| OutChr1: |
| lbz r0, 5(r10) /* read link status */ |
| eieio |
| andi. r0, r0, 0x40 /* mask transmitter empty bit */ |
| beq cr0, OutChr1 /* wait till empty */ |
| stb r3, 0(r10) /* write to transmit reg */ |
| eieio |
| blr |
| /* |
| * Input: r3 adr to read |
| * Output: r3 val or -1 for error |
| */ |
| spdRead: |
| mfspr r26, 8 /* save link register */ |
| |
| lis r30, CFG_ISA_IO@h |
| ori r30, r30, 0x220 /* GPIO Port 1 */ |
| li r7, 0x00 |
| li r8, 0x100 |
| and. r5, r3, r8 |
| beq spdbank0 |
| li r12, 0x08 |
| li r4, 0x10 |
| li r6, 0x18 |
| b spdRead1 |
| |
| spdbank0: |
| li r12, 0x20 /* set I2C data */ |
| li r4, 0x40 /* set I2C clock */ |
| li r6, 0x60 /* set I2C clock and data */ |
| |
| spdRead1: |
| li r8, 0x80 |
| |
| bl spdStart /* access I2C bus as master */ |
| li r10, 0xa0 /* write to SPD */ |
| bl spdWriteByte |
| bl spdReadAck /* ACK returns in r10 */ |
| cmpw cr0, r10, r7 |
| bne AckErr /* r10 must be 0, if ACK received */ |
| mr r10, r3 /* adr to read */ |
| bl spdWriteByte |
| bl spdReadAck |
| cmpw cr0, r10, r7 |
| bne AckErr |
| bl spdStart |
| li r10, 0xa1 /* read from SPD */ |
| bl spdWriteByte |
| bl spdReadAck |
| cmpw cr0, r10, r7 |
| bne AckErr |
| bl spdReadByte /* return val in r10 */ |
| bl spdWriteAck |
| bl spdStop /* release I2C bus */ |
| mr r3, r10 |
| mtspr 8, r26 /* restore link register */ |
| blr |
| /* |
| * ACK error occurred |
| */ |
| AckErr: |
| bl spdStop |
| orc r3, r0, r0 /* return -1 */ |
| mtspr 8, r26 /* restore link register */ |
| blr |
| |
| /* |
| * Routines to read from RAM spd. |
| * r30 - GPIO Port1 address in all cases. |
| * r4 - clock mask for SPD |
| * r6 - port mask for SPD |
| * r12 - data mask for SPD |
| */ |
| waitSpd: |
| li r0, 0x1000 |
| mtctr r0 |
| wSpd: |
| bdnz wSpd |
| bclr 20, 0 /* return to caller */ |
| |
| /* |
| * establish START condition on I2C bus |
| */ |
| spdStart: |
| mfspr r27, 8 /* save link register */ |
| stb r6, 0(r30) /* set SDA and SCL */ |
| eieio |
| stb r6, 1(r30) /* switch GPIO to output */ |
| eieio |
| bl waitSpd |
| stb r4, 0(r30) /* reset SDA */ |
| eieio |
| bl waitSpd |
| stb r7, 0(r30) /* reset SCL */ |
| eieio |
| bl waitSpd |
| mtspr 8, r27 |
| bclr 20, 0 /* return to caller */ |
| |
| /* |
| * establish STOP condition on I2C bus |
| */ |
| spdStop: |
| mfspr r27, 8 /* save link register */ |
| stb r7, 0(r30) /* reset SCL and SDA */ |
| eieio |
| stb r6, 1(r30) /* switch GPIO to output */ |
| eieio |
| bl waitSpd |
| stb r4, 0(r30) /* set SCL */ |
| eieio |
| bl waitSpd |
| stb r6, 0(r30) /* set SDA and SCL */ |
| eieio |
| bl waitSpd |
| stb r7, 1(r30) /* switch GPIO to input */ |
| eieio |
| mtspr 8, r27 |
| bclr 20, 0 /* return to caller */ |
| |
| spdReadByte: |
| mfspr r27, 8 |
| stb r4, 1(r30) /* set GPIO for SCL output */ |
| eieio |
| li r9, 0x08 |
| li r10, 0x00 |
| loopRB: |
| stb r7, 0(r30) /* reset SDA and SCL */ |
| eieio |
| bl waitSpd |
| stb r4, 0(r30) /* set SCL */ |
| eieio |
| bl waitSpd |
| lbz r5, 0(r30) /* read from GPIO Port1 */ |
| rlwinm r10, r10, 1, 0, 31 |
| and. r5, r5, r12 |
| beq clearBit |
| ori r10, r10, 0x01 /* append _1_ */ |
| clearBit: |
| stb r7, 0(r30) /* reset SCL */ |
| eieio |
| bl waitSpd |
| addic. r9, r9, -1 |
| bne loopRB |
| mtspr 8, r27 |
| bclr 20, 0 /* return (r10) to caller */ |
| |
| /* |
| * spdWriteByte writes bits 24 - 31 of r10 to I2C. |
| * r8 contains bit mask 0x80 |
| */ |
| spdWriteByte: |
| mfspr r27, 8 /* save link register */ |
| li r9, 0x08 /* write octet */ |
| and. r5, r10, r8 |
| bne sWB1 |
| stb r7, 0(r30) /* set SDA to _0_ */ |
| eieio |
| b sWB2 |
| sWB1: |
| stb r12, 0(r30) /* set SDA to _1_ */ |
| eieio |
| sWB2: |
| stb r6, 1(r30) /* set GPIO to output */ |
| eieio |
| loopWB: |
| and. r5, r10, r8 |
| bne sWB3 |
| stb r7, 0(r30) /* set SDA to _0_ */ |
| eieio |
| b sWB4 |
| sWB3: |
| stb r12, 0(r30) /* set SDA to _1_ */ |
| eieio |
| sWB4: |
| bl waitSpd |
| and. r5, r10, r8 |
| bne sWB5 |
| stb r4, 0(r30) /* set SDA to _0_ and SCL */ |
| eieio |
| b sWB6 |
| sWB5: |
| stb r6, 0(r30) /* set SDA to _1_ and SCL */ |
| eieio |
| sWB6: |
| bl waitSpd |
| and. r5, r10, r8 |
| bne sWB7 |
| stb r7, 0(r30) /* set SDA to _0_ and reset SCL */ |
| eieio |
| b sWB8 |
| sWB7: |
| stb r12, 0(r30) /* set SDA to _1_ and reset SCL */ |
| eieio |
| sWB8: |
| bl waitSpd |
| rlwinm r10, r10, 1, 0, 31 /* next bit */ |
| addic. r9, r9, -1 |
| bne loopWB |
| mtspr 8, r27 |
| bclr 20, 0 /* return to caller */ |
| |
| /* |
| * Read ACK from SPD, return value in r10 |
| */ |
| spdReadAck: |
| mfspr r27, 8 /* save link register */ |
| stb r4, 1(r30) /* set GPIO to output */ |
| eieio |
| stb r7, 0(r30) /* reset SDA and SCL */ |
| eieio |
| bl waitSpd |
| stb r4, 0(r30) /* set SCL */ |
| eieio |
| bl waitSpd |
| lbz r10, 0(r30) /* read GPIO Port 1 and mask SDA */ |
| and r10, r10, r12 |
| bl waitSpd |
| stb r7, 0(r30) /* reset SDA and SCL */ |
| eieio |
| bl waitSpd |
| mtspr 8, r27 |
| bclr 20, 0 /* return (r10) to caller */ |
| |
| spdWriteAck: |
| mfspr r27, 8 |
| stb r12, 0(r30) /* set SCL */ |
| eieio |
| stb r6, 1(r30) /* set GPIO to output */ |
| eieio |
| bl waitSpd |
| stb r6, 0(r30) /* SDA and SCL */ |
| eieio |
| bl waitSpd |
| stb r12, 0(r30) /* reset SCL */ |
| eieio |
| bl waitSpd |
| mtspr 8, r27 |
| bclr 20, 0 /* return to caller */ |
| |
| get_lnk_reg: |
| mflr r3 /* return link reg */ |
| blr |
| |
| /* |
| * Messages for console output |
| */ |
| .globl MessageBlock |
| MessageBlock: |
| Mok: |
| .ascii "OK\015\012\000" |
| Mfail: |
| .ascii "FAILED\015\012\000" |
| Mna: |
| .ascii "NA\015\012\000" |
| MinitLogo: |
| .ascii "\015\012*** ELTEC Elektronik, Mainz ***\015\012" |
| .ascii "\015\012Initialising RAM\015\012\000" |
| Mspd01: |
| .ascii " Reading SPD of bank0/1 ..... \000" |
| Mspd23: |
| .ascii " Reading SPD of bank2/3 ..... \000" |
| MfpmRam: |
| .ascii " RAM-Type: FPM \015\012\000" |
| MedoRam: |
| .ascii " RAM-Type: EDO \015\012\000" |
| MsdRam: |
| .ascii " RAM-Type: SDRAM \015\012\000" |
| Mactivate: |
| .ascii " Activating \000" |
| Mmbyte: |
| .ascii " MB .......... \000" |
| .align 4 |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |