| /* |
| * (C) Copyright 2002 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <config.h> |
| #include <common.h> |
| #include <command.h> |
| #include <asm/io.h> |
| #include <linux/mtd/doc2000.h> |
| #include <watchdog.h> |
| #include <pci.h> |
| |
| #include "hardware.h" |
| #include "pcippc2.h" |
| #include "sconsole.h" |
| #include "fpga_serial.h" |
| |
| #if defined(CONFIG_WATCHDOG) |
| |
| static int pcippc2_wdt_init_done = 0; |
| |
| void pcippc2_wdt_init (void); |
| |
| #endif |
| |
| /* Check board identity |
| */ |
| int checkboard (void) |
| { |
| #ifdef CONFIG_PCIPPC2 |
| puts ("Board: Gespac PCIPPC-2\n"); |
| #else |
| puts ("Board: Gespac PCIPPC-6\n"); |
| #endif |
| return 0; |
| } |
| |
| /* RAM size is stored in CPC0_RGBAN1 |
| */ |
| u32 pcippc2_sdram_size (void) |
| { |
| return in32 (REG (CPC0, RGBAN1)); |
| } |
| |
| long initdram (int board_type) |
| { |
| return cpc710_ram_init (); |
| } |
| |
| void do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) |
| { |
| out32 (REG (CPC0, SPOR), 0); |
| iobarrier_rw (); |
| while (1); |
| } |
| |
| int board_pre_init (void) |
| { |
| out32 (REG (CPC0, RSTR), 0xC0000000); |
| iobarrier_rw (); |
| |
| out32 (REG (CPC0, RSTR), 0xF0000000); |
| iobarrier_rw (); |
| |
| out32 (REG (CPC0, UCTL), 0x00F80000); |
| |
| out32 (REG (CPC0, SIOC0), 0x30000000); |
| |
| out32 (REG (CPC0, ABCNTL), 0x00000000); |
| |
| out32 (REG (CPC0, SESR), 0x00000000); |
| out32 (REG (CPC0, SEAR), 0x00000000); |
| |
| /* Detect IBM Avignon CPC710 Revision */ |
| if ((in32 (REG (CPC0, UCTL)) & 0x000000F0) == CPC710_TYPE_100P) |
| out32 (REG (CPC0, PGCHP), 0xA0000040); |
| else |
| out32 (REG (CPC0, PGCHP), 0x80800040); |
| |
| |
| out32 (REG (CPC0, ATAS), 0x709C2508); |
| |
| iobarrier_rw (); |
| |
| return 0; |
| } |
| |
| void after_reloc (ulong dest_addr) |
| { |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* Jump to the main U-Boot board init code |
| */ |
| board_init_r (gd, dest_addr); |
| } |
| |
| int misc_init_r (void) |
| { |
| pcippc2_fpga_init (); |
| |
| #if defined(CONFIG_WATCHDOG) |
| pcippc2_wdt_init (); |
| #endif |
| |
| fpga_serial_init (sconsole_get_baudrate ()); |
| |
| sconsole_putc = fpga_serial_putc; |
| sconsole_puts = fpga_serial_puts; |
| sconsole_getc = fpga_serial_getc; |
| sconsole_tstc = fpga_serial_tstc; |
| sconsole_setbrg = fpga_serial_setbrg; |
| |
| sconsole_flush (); |
| return (0); |
| } |
| |
| void pci_init (void) |
| { |
| cpc710_pci_init (); |
| |
| /* FPGA requires no retry timeouts to be enabled |
| */ |
| cpc710_pci_enable_timeout (); |
| } |
| |
| void doc_init (void) |
| { |
| doc_probe (pcippc2_fpga1_phys + HW_FPGA1_DOC); |
| } |
| |
| #if defined(CONFIG_WATCHDOG) |
| |
| void pcippc2_wdt_init (void) |
| { |
| out16r (FPGA (WDT, PROG), 0xffff); |
| out8 (FPGA (WDT, CTRL), 0x1); |
| |
| pcippc2_wdt_init_done = 1; |
| } |
| |
| void pcippc2_wdt_done (void) |
| { |
| out8 (FPGA (WDT, CTRL), 0x0); |
| |
| pcippc2_wdt_init_done = 0; |
| } |
| |
| void pcippc2_wdt_reset (void) |
| { |
| if (pcippc2_wdt_init_done == 1) |
| out8 (FPGA (WDT, REFRESH), 0x56); |
| } |
| |
| void watchdog_reset (void) |
| { |
| int re_enable = disable_interrupts (); |
| |
| pcippc2_wdt_reset (); |
| if (re_enable) |
| enable_interrupts (); |
| } |
| |
| #if (CONFIG_COMMANDS & CFG_CMD_BSP) |
| int do_wd (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) |
| { |
| switch (argc) { |
| case 1: |
| printf ("Watchdog timer status is %s\n", |
| pcippc2_wdt_init_done == 1 ? "on" : "off"); |
| |
| return 0; |
| case 2: |
| if (!strcmp(argv[1],"on")) { |
| pcippc2_wdt_init(); |
| printf("Watchdog timer now is on\n"); |
| |
| return 0; |
| |
| } else if (!strcmp(argv[1],"off")) { |
| pcippc2_wdt_done(); |
| printf("Watchdog timer now is off\n"); |
| |
| return 0; |
| |
| } else |
| break; |
| default: |
| break; |
| } |
| printf ("Usage:\n%s\n", cmdtp->usage); |
| return 1; |
| } |
| |
| #endif /* CFG_CMD_BSP */ |
| #endif /* CONFIG_WATCHDOG */ |