| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2016 Freescale Semiconductor, Inc. |
| * Copyright 2021 NXP |
| */ |
| |
| #include <common.h> |
| #include <i2c.h> |
| #include <fdt_support.h> |
| #include <asm/cache.h> |
| #include <init.h> |
| #include <asm/global_data.h> |
| #include <asm/io.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/fsl_serdes.h> |
| #include <asm/arch/fdt.h> |
| #include <asm/arch/mmu.h> |
| #include <asm/arch/soc.h> |
| #include <ahci.h> |
| #include <hwconfig.h> |
| #include <mmc.h> |
| #include <env_internal.h> |
| #include <scsi.h> |
| #include <fm_eth.h> |
| #include <fsl_esdhc.h> |
| #include <fsl_mmdc.h> |
| #include <spl.h> |
| #include <netdev.h> |
| #include "../common/qixis.h" |
| #include "ls1012aqds_qixis.h" |
| #include "ls1012aqds_pfe.h" |
| #include <net/pfe_eth/pfe/pfe_hw.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| int checkboard(void) |
| { |
| char buf[64]; |
| u8 sw; |
| |
| sw = QIXIS_READ(arch); |
| printf("Board Arch: V%d, ", sw >> 4); |
| printf("Board version: %c, boot from ", (sw & 0xf) + 'A' - 1); |
| |
| sw = QIXIS_READ(brdcfg[QIXIS_LBMAP_BRDCFG_REG]); |
| |
| if (sw & QIXIS_LBMAP_ALTBANK) |
| printf("flash: 2\n"); |
| else |
| printf("flash: 1\n"); |
| |
| printf("FPGA: v%d (%s), build %d", |
| (int)QIXIS_READ(scver), qixis_read_tag(buf), |
| (int)qixis_read_minor()); |
| |
| /* the timestamp string contains "\n" at the end */ |
| printf(" on %s", qixis_read_time(buf)); |
| return 0; |
| } |
| |
| #ifdef CONFIG_TFABOOT |
| int dram_init(void) |
| { |
| gd->ram_size = tfa_get_dram_size(); |
| if (!gd->ram_size) |
| gd->ram_size = CFG_SYS_SDRAM_SIZE; |
| |
| return 0; |
| } |
| #else |
| int dram_init(void) |
| { |
| static const struct fsl_mmdc_info mparam = { |
| 0x05180000, /* mdctl */ |
| 0x00030035, /* mdpdc */ |
| 0x12554000, /* mdotc */ |
| 0xbabf7954, /* mdcfg0 */ |
| 0xdb328f64, /* mdcfg1 */ |
| 0x01ff00db, /* mdcfg2 */ |
| 0x00001680, /* mdmisc */ |
| 0x0f3c8000, /* mdref */ |
| 0x00002000, /* mdrwd */ |
| 0x00bf1023, /* mdor */ |
| 0x0000003f, /* mdasp */ |
| 0x0000022a, /* mpodtctrl */ |
| 0xa1390003, /* mpzqhwctrl */ |
| }; |
| |
| mmdc_init(&mparam); |
| gd->ram_size = CFG_SYS_SDRAM_SIZE; |
| #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) |
| /* This will break-before-make MMU for DDR */ |
| update_early_mmu_table(); |
| #endif |
| |
| return 0; |
| } |
| #endif |
| |
| int board_early_init_f(void) |
| { |
| fsl_lsch2_early_init_f(); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_MISC_INIT_R |
| int misc_init_r(void) |
| { |
| u8 mux_sdhc_cd = 0x80; |
| int bus_num = 0; |
| |
| #if CONFIG_IS_ENABLED(DM_I2C) |
| struct udevice *dev; |
| int ret; |
| |
| ret = i2c_get_chip_for_busnum(bus_num, CFG_SYS_I2C_FPGA_ADDR, |
| 1, &dev); |
| if (ret) { |
| printf("%s: Cannot find udev for a bus %d\n", __func__, |
| bus_num); |
| return ret; |
| } |
| dm_i2c_write(dev, 0x5a, &mux_sdhc_cd, 1); |
| #else |
| i2c_set_bus_num(bus_num); |
| |
| i2c_write(CFG_SYS_I2C_FPGA_ADDR, 0x5a, 1, &mux_sdhc_cd, 1); |
| #endif |
| |
| return 0; |
| } |
| #endif |
| |
| int board_init(void) |
| { |
| struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR + |
| CONFIG_SYS_CCI400_OFFSET); |
| |
| /* Set CCI-400 control override register to enable barrier |
| * transaction */ |
| if (current_el() == 3) |
| out_le32(&cci->ctrl_ord, |
| CCI400_CTRLORD_EN_BARRIER); |
| |
| #ifdef CONFIG_SYS_FSL_ERRATUM_A010315 |
| erratum_a010315(); |
| #endif |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_FSL_PFE |
| void board_quiesce_devices(void) |
| { |
| pfe_command_stop(0, NULL); |
| } |
| #endif |
| |
| int esdhc_status_fixup(void *blob, const char *compat) |
| { |
| char esdhc0_path[] = "/soc/esdhc@1560000"; |
| char esdhc1_path[] = "/soc/esdhc@1580000"; |
| u8 card_id; |
| |
| do_fixup_by_path(blob, esdhc0_path, "status", "okay", |
| sizeof("okay"), 1); |
| |
| /* |
| * The Presence Detect 2 register detects the installation |
| * of cards in various PCI Express or SGMII slots. |
| * |
| * STAT_PRS2[7:5]: Specifies the type of card installed in the |
| * SDHC2 Adapter slot. 0b111 indicates no adapter is installed. |
| */ |
| card_id = (QIXIS_READ(present2) & 0xe0) >> 5; |
| |
| /* If no adapter is installed in SDHC2, disable SDHC2 */ |
| if (card_id == 0x7) |
| do_fixup_by_path(blob, esdhc1_path, "status", "disabled", |
| sizeof("disabled"), 1); |
| else |
| do_fixup_by_path(blob, esdhc1_path, "status", "okay", |
| sizeof("okay"), 1); |
| return 0; |
| } |
| |
| static int pfe_set_properties(void *set_blob, struct pfe_prop_val prop_val, |
| char *enet_path, char *mdio_path) |
| { |
| do_fixup_by_path(set_blob, enet_path, "fsl,gemac-bus-id", |
| &prop_val.busid, PFE_PROP_LEN, 1); |
| do_fixup_by_path(set_blob, enet_path, "fsl,gemac-phy-id", |
| &prop_val.phyid, PFE_PROP_LEN, 1); |
| do_fixup_by_path(set_blob, enet_path, "fsl,mdio-mux-val", |
| &prop_val.mux_val, PFE_PROP_LEN, 1); |
| do_fixup_by_path(set_blob, enet_path, "phy-mode", |
| prop_val.phy_mode, strlen(prop_val.phy_mode) + 1, 1); |
| do_fixup_by_path(set_blob, mdio_path, "fsl,mdio-phy-mask", |
| &prop_val.phy_mask, PFE_PROP_LEN, 1); |
| return 0; |
| } |
| |
| static void fdt_fsl_fixup_of_pfe(void *blob) |
| { |
| int i = 0; |
| struct pfe_prop_val prop_val; |
| void *l_blob = blob; |
| |
| struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR; |
| unsigned int srds_s1 = in_be32(&gur->rcwsr[4]) & |
| FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK; |
| srds_s1 >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT; |
| |
| for (i = 0; i < NUM_ETH_NODE; i++) { |
| switch (srds_s1) { |
| case SERDES_1_G_PROTOCOL: |
| if (i == 0) { |
| prop_val.busid = cpu_to_fdt32( |
| ETH_1_1G_BUS_ID); |
| prop_val.phyid = cpu_to_fdt32( |
| ETH_1_1G_PHY_ID); |
| prop_val.mux_val = cpu_to_fdt32( |
| ETH_1_1G_MDIO_MUX); |
| prop_val.phy_mask = cpu_to_fdt32( |
| ETH_1G_MDIO_PHY_MASK); |
| prop_val.phy_mode = "sgmii"; |
| pfe_set_properties(l_blob, prop_val, ETH_1_PATH, |
| ETH_1_MDIO); |
| } else { |
| prop_val.busid = cpu_to_fdt32( |
| ETH_2_1G_BUS_ID); |
| prop_val.phyid = cpu_to_fdt32( |
| ETH_2_1G_PHY_ID); |
| prop_val.mux_val = cpu_to_fdt32( |
| ETH_2_1G_MDIO_MUX); |
| prop_val.phy_mask = cpu_to_fdt32( |
| ETH_1G_MDIO_PHY_MASK); |
| prop_val.phy_mode = "rgmii"; |
| pfe_set_properties(l_blob, prop_val, ETH_2_PATH, |
| ETH_2_MDIO); |
| } |
| break; |
| case SERDES_2_5_G_PROTOCOL: |
| if (i == 0) { |
| prop_val.busid = cpu_to_fdt32( |
| ETH_1_2_5G_BUS_ID); |
| prop_val.phyid = cpu_to_fdt32( |
| ETH_1_2_5G_PHY_ID); |
| prop_val.mux_val = cpu_to_fdt32( |
| ETH_1_2_5G_MDIO_MUX); |
| prop_val.phy_mask = cpu_to_fdt32( |
| ETH_2_5G_MDIO_PHY_MASK); |
| prop_val.phy_mode = "2500base-x"; |
| pfe_set_properties(l_blob, prop_val, ETH_1_PATH, |
| ETH_1_MDIO); |
| } else { |
| prop_val.busid = cpu_to_fdt32( |
| ETH_2_2_5G_BUS_ID); |
| prop_val.phyid = cpu_to_fdt32( |
| ETH_2_2_5G_PHY_ID); |
| prop_val.mux_val = cpu_to_fdt32( |
| ETH_2_2_5G_MDIO_MUX); |
| prop_val.phy_mask = cpu_to_fdt32( |
| ETH_2_5G_MDIO_PHY_MASK); |
| prop_val.phy_mode = "2500base-x"; |
| pfe_set_properties(l_blob, prop_val, ETH_2_PATH, |
| ETH_2_MDIO); |
| } |
| break; |
| default: |
| printf("serdes:[%d]\n", srds_s1); |
| } |
| } |
| } |
| |
| #ifdef CONFIG_OF_BOARD_SETUP |
| int ft_board_setup(void *blob, struct bd_info *bd) |
| { |
| arch_fixup_fdt(blob); |
| |
| ft_cpu_setup(blob, bd); |
| fdt_fsl_fixup_of_pfe(blob); |
| |
| return 0; |
| } |
| #endif |