blob: 3b2ba091247030d8a440c524441dfde060ad2580 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
#ifndef _TIME_H
#define _TIME_H
#include <linux/typecheck.h>
#include <linux/types.h>
ulong get_tbclk(void);
unsigned long get_timer(unsigned long base);
/*
* Return the current value of a monotonically increasing microsecond timer.
* Granularity may be larger than 1us if hardware does not support this.
*/
unsigned long timer_get_us(void);
uint64_t get_timer_us(uint64_t base);
/**
* get_timer_us_long() - Get the number of elapsed microseconds
*
* This uses 32-bit arithmetic on 32-bit machines, which is enough to handle
* delays of over an hour. For 64-bit machines it uses a 64-bit value.
*
*@base: Base time to consider
*Return: elapsed time since @base
*/
unsigned long get_timer_us_long(unsigned long base);
/*
* timer_test_add_offset()
*
* Allow tests to add to the time reported through lib/time.c functions
* offset: number of milliseconds to advance the system time
*/
void timer_test_add_offset(unsigned long offset);
/**
* usec_to_tick() - convert microseconds to clock ticks
*
* @usec: duration in microseconds
* Return: duration in clock ticks
*/
uint64_t usec_to_tick(unsigned long usec);
/*
* These inlines deal with timer wrapping correctly. You are
* strongly encouraged to use them
* 1. Because people otherwise forget
* 2. Because if the timer wrap changes in future you won't have to
* alter your driver code.
*
* time_after(a,b) returns true if the time a is after time b.
*
* Do this with "<0" and ">=0" to only test the sign of the result. A
* good compiler would generate better code (and a really good compiler
* wouldn't care). Gcc is currently neither.
*/
#define time_after(a,b) \
(typecheck(unsigned long, a) && \
typecheck(unsigned long, b) && \
((long)((b) - (a)) < 0))
#define time_before(a,b) time_after(b,a)
#define time_after_eq(a,b) \
(typecheck(unsigned long, a) && \
typecheck(unsigned long, b) && \
((long)((a) - (b)) >= 0))
#define time_before_eq(a,b) time_after_eq(b,a)
/*
* Calculate whether a is in the range of [b, c].
*/
#define time_in_range(a,b,c) \
(time_after_eq(a,b) && \
time_before_eq(a,c))
/*
* Calculate whether a is in the range of [b, c).
*/
#define time_in_range_open(a,b,c) \
(time_after_eq(a,b) && \
time_before(a,c))
/* Same as above, but does so with platform independent 64bit types.
* These must be used when utilizing jiffies_64 (i.e. return value of
* get_jiffies_64() */
#define time_after64(a,b) \
(typecheck(__u64, a) && \
typecheck(__u64, b) && \
((__s64)((b) - (a)) < 0))
#define time_before64(a,b) time_after64(b,a)
#define time_after_eq64(a,b) \
(typecheck(__u64, a) && \
typecheck(__u64, b) && \
((__s64)((a) - (b)) >= 0))
#define time_before_eq64(a,b) time_after_eq64(b,a)
#define time_in_range64(a, b, c) \
(time_after_eq64(a, b) && \
time_before_eq64(a, c))
/**
* usec2ticks() - Convert microseconds to internal ticks
*
* @usec: Value of microseconds to convert
* Return: Corresponding internal ticks value, calculated using get_tbclk()
*/
ulong usec2ticks(unsigned long usec);
/**
* ticks2usec() - Convert internal ticks to microseconds
*
* @ticks: Value of ticks to convert
* Return: Corresponding microseconds value, calculated using get_tbclk()
*/
ulong ticks2usec(unsigned long ticks);
/**
* wait_ticks() - waits a given number of ticks
*
* This is an internal function typically used to implement udelay() and
* similar. Normally you should use udelay() or mdelay() instead.
*
* @ticks: Number of ticks to wait
*/
void wait_ticks(unsigned long ticks);
/**
* timer_get_us() - Get monotonic microsecond timer
*
* Return: value of monotonic microsecond timer
*/
unsigned long timer_get_us(void);
/**
* get_ticks() - Get the current tick value
*
* This is an internal value used by the timer on the system. Ticks increase
* monotonically at the rate given by get_tbclk().
*
* Return: current tick value
*/
uint64_t get_ticks(void);
#endif /* _TIME_H */