| /* |
| * Copyright (C) 2011 Texas Instruments Incorporated |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* Spectrum Digital TMS320DM6467T EVM board */ |
| #define DAVINCI_DM6467EVM |
| #define DAVINCI_DM6467TEVM |
| #define CONFIG_SYS_USE_NAND |
| #define CONFIG_SYS_NAND_SMALLPAGE |
| |
| #define CONFIG_SKIP_LOWLEVEL_INIT |
| |
| /* SoC Configuration */ |
| #define CONFIG_ARM926EJS /* arm926ejs CPU */ |
| |
| /* Clock rates detection */ |
| #ifndef __ASSEMBLY__ |
| extern unsigned int davinci_arm_clk_get(void); |
| #endif |
| |
| #define CFG_REFCLK_FREQ 33000000 |
| /* Arm Clock frequency */ |
| #define CONFIG_SYS_CLK_FREQ davinci_arm_clk_get() |
| /* Timer Input clock freq */ |
| #define CONFIG_SYS_HZ_CLOCK (CONFIG_SYS_CLK_FREQ/2) |
| #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ |
| #define CONFIG_SYS_HZ 1000 |
| #define CONFIG_SOC_DM646X |
| |
| /* EEPROM definitions for EEPROM */ |
| #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 |
| #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 |
| #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 |
| #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 |
| |
| /* Memory Info */ |
| #define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ |
| #define CONFIG_SYS_MEMTEST_START 0x80000000 |
| #define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ |
| #define CONFIG_NR_DRAM_BANKS 1 |
| #define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ |
| #define PHYS_SDRAM_1 0x80000000 /* DDR Start */ |
| #define PHYS_SDRAM_1_SIZE (256 << 20) /* DDR size 256MB */ |
| |
| /* Linux interfacing */ |
| #define CONFIG_CMDLINE_TAG |
| #define CONFIG_SETUP_MEMORY_TAGS |
| #define CONFIG_SYS_BARGSIZE 1024 /* Bootarg Size */ |
| #define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */ |
| #define CONFIG_REVISION_TAG |
| |
| /* Serial Driver info */ |
| #define CONFIG_SYS_NS16550 |
| #define CONFIG_SYS_NS16550_SERIAL |
| #define CONFIG_SYS_NS16550_REG_SIZE 4 |
| #define CONFIG_SYS_NS16550_COM1 0x01c20000 |
| #define CONFIG_SYS_NS16550_CLK 24000000 |
| #define CONFIG_CONS_INDEX 1 |
| #define CONFIG_BAUDRATE 115200 |
| #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |
| |
| /* I2C Configuration */ |
| #define CONFIG_HARD_I2C |
| #define CONFIG_DRIVER_DAVINCI_I2C |
| #define CONFIG_SYS_I2C_SPEED 80000 |
| #define CONFIG_SYS_I2C_SLAVE 10 |
| |
| /* Network & Ethernet Configuration */ |
| #define CONFIG_DRIVER_TI_EMAC |
| #define CONFIG_EMAC_MDIO_PHY_NUM 1 |
| #define CONFIG_MII |
| #define CONFIG_BOOTP_DEFAULT |
| #define CONFIG_BOOTP_DNS |
| #define CONFIG_BOOTP_DNS2 |
| #define CONFIG_BOOTP_SEND_HOSTNAME |
| #define CONFIG_NET_RETRY_COUNT 10 |
| #define CONFIG_CMD_NET |
| |
| /* Flash & Environment */ |
| #define CONFIG_SYS_NO_FLASH |
| #ifdef CONFIG_SYS_USE_NAND |
| #define CONFIG_NAND_DAVINCI |
| #define CONFIG_SYS_NAND_CS 2 |
| #undef CONFIG_ENV_IS_IN_FLASH |
| #define CONFIG_ENV_IS_IN_NAND |
| #define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ |
| #define CONFIG_SYS_NAND_BASE_LIST {0x42000000, } |
| #define CONFIG_SYS_NAND_HW_ECC |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 |
| #define CONFIG_ENV_OFFSET 0 |
| #else |
| #define CONFIG_ENV_IS_NOWHERE |
| #define CONFIG_ENV_SIZE (4 << 10) /* 4 KiB */ |
| #endif |
| |
| /* U-Boot general configuration */ |
| #undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ |
| #define CONFIG_BOOTDELAY 3 |
| #define CONFIG_BOOTFILE "uImage" /* Boot file name */ |
| #define CONFIG_SYS_PROMPT "DM6467 EVM > " /* Monitor Command Prompt */ |
| #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
| #define CONFIG_SYS_PBSIZE \ |
| (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) |
| #define CONFIG_SYS_MAXARGS 16 |
| #define CONFIG_VERSION_VARIABLE |
| #define CONFIG_AUTO_COMPLETE |
| #define CONFIG_SYS_HUSH_PARSER |
| #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " |
| #define CONFIG_CMDLINE_EDITING |
| #define CONFIG_SYS_LONGHELP |
| #define CONFIG_CRC32_VERIFY |
| #define CONFIG_MX_CYCLIC |
| #define CONFIG_BOOTCOMMAND "source 0x82080000; dhcp; bootm" |
| #define CONFIG_BOOTARGS \ |
| "mem=120M console=ttyS0,115200n8 " \ |
| "root=/dev/hda1 rw noinitrd ip=dhcp" |
| |
| /* U-Boot commands */ |
| #include <config_cmd_default.h> |
| #define CONFIG_CMD_ASKENV |
| #define CONFIG_CMD_DIAG |
| #define CONFIG_CMD_I2C |
| #define CONFIG_CMD_MII |
| #define CONFIG_CMD_SAVES |
| #define CONFIG_CMD_EEPROM |
| #define CONFIG_CMD_PING |
| #define CONFIG_CMD_DHCP |
| #undef CONFIG_CMD_BDI |
| #undef CONFIG_CMD_FPGA |
| #undef CONFIG_CMD_SETGETDCR |
| #ifdef CONFIG_SYS_USE_NAND |
| #undef CONFIG_CMD_FLASH |
| #undef CONFIG_CMD_IMLS |
| #define CONFIG_CMD_NAND |
| #endif |
| |
| #define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ |
| |
| #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 |
| #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 |
| #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ |
| CONFIG_SYS_INIT_RAM_SIZE - \ |
| GENERATED_GBL_DATA_SIZE) |
| |
| #endif /* __CONFIG_H */ |