blob: 7bea61ec155636ddcf37695ba462981ad293cdbd [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* am43xx_evm.h
*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
*/
#ifndef __CONFIG_AM43XX_EVM_H
#define __CONFIG_AM43XX_EVM_H
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 21) /* 2GB */
#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
#include <asm/arch/omap.h>
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550_CLK 48000000
#if !defined(CONFIG_SPL_DM) || !defined(CONFIG_DM_SERIAL)
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#define CONFIG_SYS_NS16550_SERIAL
#endif
/* I2C Configuration */
/* Power */
#define CONFIG_POWER_TPS65218
#define CONFIG_POWER_TPS62362
/* SPL defines. */
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
(128 << 20))
/* Enabling L2 Cache */
#define CONFIG_SYS_L2_PL310
#define CONFIG_SYS_PL310_BASE 0x48242000
/*
* When building U-Boot such that there is no previous loader
* we need to call board_early_init_f. This is taken care of in
* s_init when we have SPL used.
*/
/* Now bring in the rest of the common code. */
#include <configs/ti_armv7_omap.h>
/* Clock Defines */
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
/* SPL USB Support */
#if defined(CONFIG_SPL_USB_HOST) || !defined(CONFIG_SPL_BUILD)
#define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1
#endif
#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USB_GADGET)
#undef CONFIG_USB_DWC3_PHY_OMAP
#undef CONFIG_USB_DWC3_OMAP
#undef CONFIG_USB_DWC3
#undef CONFIG_USB_DWC3_GADGET
#undef CONFIG_USB_GADGET_DOWNLOAD
#undef CONFIG_USB_GADGET_VBUS_DRAW
#undef CONFIG_USB_GADGET_MANUFACTURER
#undef CONFIG_USB_GADGET_VENDOR_NUM
#undef CONFIG_USB_GADGET_PRODUCT_NUM
#undef CONFIG_USB_GADGET_DUALSPEED
#endif
/*
* Disable MMC DM for SPL build and can be re-enabled after adding
* DM support in SPL
*/
#ifdef CONFIG_SPL_BUILD
#undef CONFIG_TIMER
#endif
#ifndef CONFIG_SPL_BUILD
/* USB Device Firmware Update support */
#define DFUARGS \
"dfu_bufsiz=0x10000\0" \
DFU_ALT_INFO_MMC \
DFU_ALT_INFO_EMMC \
DFU_ALT_INFO_RAM \
DFU_ALT_INFO_QSPI_XIP
#else
#define DFUARGS
#endif
#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
"bootcmd_" #devtypel "=" \
"run nandboot\0"
#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
#devtypel #instance " "
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(USB, usb, 0) \
func(NAND, nand, 0) \
func(PXE, pxe, na) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
#ifndef CONFIG_SPL_BUILD
#include <environment/ti/dfu.h>
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
"fdtfile=undefined\0" \
"finduuid=part uuid mmc 0:2 uuid\0" \
"console=ttyO0,115200n8\0" \
"partitions=" \
"uuid_disk=${uuid_gpt_disk};" \
"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
"optargs=\0" \
"ramroot=/dev/ram0 rw\0" \
"ramrootfstype=ext2\0" \
"ramargs=setenv bootargs console=${console} " \
"${optargs} " \
"root=${ramroot} " \
"rootfstype=${ramrootfstype}\0" \
"loadramdisk=load ${devtype} ${devnum} ${rdaddr} ramdisk.gz\0" \
"findfdt="\
"if test $board_name = AM43EPOS; then " \
"setenv fdtfile am43x-epos-evm.dtb; fi; " \
"if test $board_name = AM43__GP; then " \
"setenv fdtfile am437x-gp-evm.dtb; fi; " \
"if test $board_name = AM43XXHS; then " \
"setenv fdtfile am437x-gp-evm.dtb; fi; " \
"if test $board_name = AM43__SK; then " \
"setenv fdtfile am437x-sk-evm.dtb; fi; " \
"if test $board_name = AM43_IDK; then " \
"setenv fdtfile am437x-idk-evm.dtb; fi; " \
"if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine device tree; fi; \0" \
NANDARGS \
NETARGS \
DFUARGS \
BOOTENV
#endif
#ifndef CONFIG_SPL_BUILD
/* CPSW Ethernet */
#define CONFIG_NET_RETRY_COUNT 10
#endif
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */
#define CONFIG_SYS_RX_ETH_BUFFER 64
/* NAND support */
#ifdef CONFIG_MTD_RAW_NAND
/* NAND: device related configs */
/* NAND: driver related configs */
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \
20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \
30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \
40, 41, 42, 43, 44, 45, 46, 47, 48, 49, \
50, 51, 52, 53, 54, 55, 56, 57, 58, 59, \
60, 61, 62, 63, 64, 65, 66, 67, 68, 69, \
70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \
80, 81, 82, 83, 84, 85, 86, 87, 88, 89, \
90, 91, 92, 93, 94, 95, 96, 97, 98, 99, \
100, 101, 102, 103, 104, 105, 106, 107, 108, 109, \
110, 111, 112, 113, 114, 115, 116, 117, 118, 119, \
120, 121, 122, 123, 124, 125, 126, 127, 128, 129, \
130, 131, 132, 133, 134, 135, 136, 137, 138, 139, \
140, 141, 142, 143, 144, 145, 146, 147, 148, 149, \
150, 151, 152, 153, 154, 155, 156, 157, 158, 159, \
160, 161, 162, 163, 164, 165, 166, 167, 168, 169, \
170, 171, 172, 173, 174, 175, 176, 177, 178, 179, \
180, 181, 182, 183, 184, 185, 186, 187, 188, 189, \
190, 191, 192, 193, 194, 195, 196, 197, 198, 199, \
200, 201, 202, 203, 204, 205, 206, 207, 208, 209, \
}
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 26
/* NAND: SPL related configs */
/* NAND: SPL falcon mode configs */
#ifdef CONFIG_SPL_OS_BOOT
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00300000 /* kernel offset */
#endif
#define NANDARGS \
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"nandargs=setenv bootargs console=${console} " \
"${optargs} " \
"root=${nandroot} " \
"rootfstype=${nandrootfstype}\0" \
"nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,4096\0" \
"nandrootfstype=ubifs rootwait=1\0" \
"nandboot=echo Booting from nand ...; " \
"run nandargs; " \
"nand read ${fdtaddr} NAND.u-boot-spl-os; " \
"nand read ${loadaddr} NAND.kernel; " \
"bootz ${loadaddr} - ${fdtaddr}\0"
#define NANDBOOT "run nandboot; "
#else /* !CONFIG_MTD_RAW_NAND */
#define NANDARGS
#define NANDBOOT
#endif /* CONFIG_MTD_RAW_NAND */
#if defined(CONFIG_TI_SECURE_DEVICE)
/* Avoid relocating onto firewalled area at end of DRAM */
#define CONFIG_PRAM (64 * 1024)
#endif /* CONFIG_TI_SECURE_DEVICE */
#endif /* __CONFIG_AM43XX_EVM_H */