| /* |
| * Driver for Blackfin On-Chip SPI device |
| * |
| * Copyright (c) 2005-2010 Analog Devices Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| /*#define DEBUG*/ |
| |
| #include <common.h> |
| #include <malloc.h> |
| #include <spi.h> |
| |
| #include <asm/blackfin.h> |
| #include <asm/gpio.h> |
| #include <asm/portmux.h> |
| #include <asm/mach-common/bits/spi.h> |
| |
| struct bfin_spi_slave { |
| struct spi_slave slave; |
| void *mmr_base; |
| u16 ctl, baud, flg; |
| }; |
| |
| #define MAKE_SPI_FUNC(mmr, off) \ |
| static inline void write_##mmr(struct bfin_spi_slave *bss, u16 val) { bfin_write16(bss->mmr_base + off, val); } \ |
| static inline u16 read_##mmr(struct bfin_spi_slave *bss) { return bfin_read16(bss->mmr_base + off); } |
| MAKE_SPI_FUNC(SPI_CTL, 0x00) |
| MAKE_SPI_FUNC(SPI_FLG, 0x04) |
| MAKE_SPI_FUNC(SPI_STAT, 0x08) |
| MAKE_SPI_FUNC(SPI_TDBR, 0x0c) |
| MAKE_SPI_FUNC(SPI_RDBR, 0x10) |
| MAKE_SPI_FUNC(SPI_BAUD, 0x14) |
| |
| #define to_bfin_spi_slave(s) container_of(s, struct bfin_spi_slave, slave) |
| |
| #define gpio_cs(cs) ((cs) - MAX_CTRL_CS) |
| #ifdef CONFIG_BFIN_SPI_GPIO_CS |
| # define is_gpio_cs(cs) ((cs) > MAX_CTRL_CS) |
| #else |
| # define is_gpio_cs(cs) 0 |
| #endif |
| |
| int spi_cs_is_valid(unsigned int bus, unsigned int cs) |
| { |
| if (is_gpio_cs(cs)) |
| return gpio_is_valid(gpio_cs(cs)); |
| else |
| return (cs >= 1 && cs <= MAX_CTRL_CS); |
| } |
| |
| void spi_cs_activate(struct spi_slave *slave) |
| { |
| struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); |
| |
| if (is_gpio_cs(slave->cs)) { |
| unsigned int cs = gpio_cs(slave->cs); |
| gpio_set_value(cs, bss->flg); |
| debug("%s: SPI_CS_GPIO:%x\n", __func__, gpio_get_value(cs)); |
| } else { |
| write_SPI_FLG(bss, |
| (read_SPI_FLG(bss) & |
| ~((!bss->flg << 8) << slave->cs)) | |
| (1 << slave->cs)); |
| debug("%s: SPI_FLG:%x\n", __func__, read_SPI_FLG(bss)); |
| } |
| |
| SSYNC(); |
| } |
| |
| void spi_cs_deactivate(struct spi_slave *slave) |
| { |
| struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); |
| |
| if (is_gpio_cs(slave->cs)) { |
| unsigned int cs = gpio_cs(slave->cs); |
| gpio_set_value(cs, !bss->flg); |
| debug("%s: SPI_CS_GPIO:%x\n", __func__, gpio_get_value(cs)); |
| } else { |
| u16 flg; |
| |
| /* make sure we force the cs to deassert rather than let the |
| * pin float back up. otherwise, exact timings may not be |
| * met some of the time leading to random behavior (ugh). |
| */ |
| flg = read_SPI_FLG(bss) | ((!bss->flg << 8) << slave->cs); |
| write_SPI_FLG(bss, flg); |
| SSYNC(); |
| debug("%s: SPI_FLG:%x\n", __func__, read_SPI_FLG(bss)); |
| |
| flg &= ~(1 << slave->cs); |
| write_SPI_FLG(bss, flg); |
| debug("%s: SPI_FLG:%x\n", __func__, read_SPI_FLG(bss)); |
| } |
| |
| SSYNC(); |
| } |
| |
| void spi_init() |
| { |
| } |
| |
| #ifdef SPI_CTL |
| # define SPI0_CTL SPI_CTL |
| #endif |
| |
| #define SPI_PINS(n) \ |
| [n] = { 0, P_SPI##n##_SCK, P_SPI##n##_MISO, P_SPI##n##_MOSI, 0 } |
| static unsigned short pins[][5] = { |
| #ifdef SPI0_CTL |
| SPI_PINS(0), |
| #endif |
| #ifdef SPI1_CTL |
| SPI_PINS(1), |
| #endif |
| #ifdef SPI2_CTL |
| SPI_PINS(2), |
| #endif |
| }; |
| |
| #define SPI_CS_PINS(n) \ |
| [n] = { \ |
| P_SPI##n##_SSEL1, P_SPI##n##_SSEL2, P_SPI##n##_SSEL3, \ |
| P_SPI##n##_SSEL4, P_SPI##n##_SSEL5, P_SPI##n##_SSEL6, \ |
| P_SPI##n##_SSEL7, \ |
| } |
| static const unsigned short cs_pins[][7] = { |
| #ifdef SPI0_CTL |
| SPI_CS_PINS(0), |
| #endif |
| #ifdef SPI1_CTL |
| SPI_CS_PINS(1), |
| #endif |
| #ifdef SPI2_CTL |
| SPI_CS_PINS(2), |
| #endif |
| }; |
| |
| void spi_set_speed(struct spi_slave *slave, uint hz) |
| { |
| struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); |
| ulong sclk; |
| u32 baud; |
| |
| sclk = get_sclk(); |
| /* baud should be rounded up */ |
| baud = DIV_ROUND_UP(sclk, 2 * hz); |
| if (baud < 2) |
| baud = 2; |
| else if (baud > (u16)-1) |
| baud = -1; |
| bss->baud = baud; |
| } |
| |
| struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, |
| unsigned int max_hz, unsigned int mode) |
| { |
| struct bfin_spi_slave *bss; |
| u32 mmr_base; |
| |
| if (!spi_cs_is_valid(bus, cs)) |
| return NULL; |
| |
| switch (bus) { |
| #ifdef SPI0_CTL |
| case 0: |
| mmr_base = SPI0_CTL; break; |
| #endif |
| #ifdef SPI1_CTL |
| case 1: |
| mmr_base = SPI1_CTL; break; |
| #endif |
| #ifdef SPI2_CTL |
| case 2: |
| mmr_base = SPI2_CTL; break; |
| #endif |
| default: |
| debug("%s: invalid bus %u\n", __func__, bus); |
| return NULL; |
| } |
| |
| bss = spi_alloc_slave(struct bfin_spi_slave, bus, cs); |
| if (!bss) |
| return NULL; |
| |
| bss->mmr_base = (void *)mmr_base; |
| bss->ctl = SPE | MSTR | TDBR_CORE; |
| if (mode & SPI_CPHA) bss->ctl |= CPHA; |
| if (mode & SPI_CPOL) bss->ctl |= CPOL; |
| if (mode & SPI_LSB_FIRST) bss->ctl |= LSBF; |
| bss->flg = mode & SPI_CS_HIGH ? 1 : 0; |
| spi_set_speed(&bss->slave, max_hz); |
| |
| debug("%s: bus:%i cs:%i mmr:%x ctl:%x baud:%i flg:%i\n", __func__, |
| bus, cs, mmr_base, bss->ctl, bss->baud, bss->flg); |
| |
| return &bss->slave; |
| } |
| |
| void spi_free_slave(struct spi_slave *slave) |
| { |
| struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); |
| free(bss); |
| } |
| |
| int spi_claim_bus(struct spi_slave *slave) |
| { |
| struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); |
| |
| debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); |
| |
| if (is_gpio_cs(slave->cs)) { |
| unsigned int cs = gpio_cs(slave->cs); |
| gpio_request(cs, "bfin-spi"); |
| gpio_direction_output(cs, !bss->flg); |
| pins[slave->bus][0] = P_DONTCARE; |
| } else |
| pins[slave->bus][0] = cs_pins[slave->bus][slave->cs - 1]; |
| peripheral_request_list(pins[slave->bus], "bfin-spi"); |
| |
| write_SPI_CTL(bss, bss->ctl); |
| write_SPI_BAUD(bss, bss->baud); |
| SSYNC(); |
| |
| return 0; |
| } |
| |
| void spi_release_bus(struct spi_slave *slave) |
| { |
| struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); |
| |
| debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); |
| |
| peripheral_free_list(pins[slave->bus]); |
| if (is_gpio_cs(slave->cs)) |
| gpio_free(gpio_cs(slave->cs)); |
| |
| write_SPI_CTL(bss, 0); |
| SSYNC(); |
| } |
| |
| #ifndef CONFIG_BFIN_SPI_IDLE_VAL |
| # define CONFIG_BFIN_SPI_IDLE_VAL 0xff |
| #endif |
| |
| static int spi_pio_xfer(struct bfin_spi_slave *bss, const u8 *tx, u8 *rx, |
| uint bytes) |
| { |
| /* discard invalid data and clear RXS */ |
| read_SPI_RDBR(bss); |
| /* todo: take advantage of hardware fifos */ |
| while (bytes--) { |
| u8 value = (tx ? *tx++ : CONFIG_BFIN_SPI_IDLE_VAL); |
| debug("%s: tx:%x ", __func__, value); |
| write_SPI_TDBR(bss, value); |
| SSYNC(); |
| while ((read_SPI_STAT(bss) & TXS)) |
| if (ctrlc()) |
| return -1; |
| while (!(read_SPI_STAT(bss) & SPIF)) |
| if (ctrlc()) |
| return -1; |
| while (!(read_SPI_STAT(bss) & RXS)) |
| if (ctrlc()) |
| return -1; |
| value = read_SPI_RDBR(bss); |
| if (rx) |
| *rx++ = value; |
| debug("rx:%x\n", value); |
| } |
| |
| return 0; |
| } |
| |
| int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, |
| void *din, unsigned long flags) |
| { |
| struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); |
| const u8 *tx = dout; |
| u8 *rx = din; |
| uint bytes = bitlen / 8; |
| int ret = 0; |
| |
| debug("%s: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n", __func__, |
| slave->bus, slave->cs, bitlen, bytes, flags); |
| |
| if (bitlen == 0) |
| goto done; |
| |
| /* we can only do 8 bit transfers */ |
| if (bitlen % 8) { |
| flags |= SPI_XFER_END; |
| goto done; |
| } |
| |
| if (flags & SPI_XFER_BEGIN) |
| spi_cs_activate(slave); |
| |
| ret = spi_pio_xfer(bss, tx, rx, bytes); |
| |
| done: |
| if (flags & SPI_XFER_END) |
| spi_cs_deactivate(slave); |
| |
| return ret; |
| } |