| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (c) 2011 The Chromium OS Authors. |
| * (C) Copyright 2008,2009 |
| * Graeme Russ, <graeme.russ@gmail.com> |
| * |
| * (C) Copyright 2002 |
| * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <log.h> |
| #include <malloc.h> |
| #include <pci.h> |
| #include <asm/io.h> |
| #include <asm/pci.h> |
| |
| int pci_x86_read_config(pci_dev_t bdf, uint offset, ulong *valuep, |
| enum pci_size_t size) |
| { |
| outl(bdf | (offset & 0xfc) | PCI_CFG_EN, PCI_REG_ADDR); |
| switch (size) { |
| case PCI_SIZE_8: |
| *valuep = inb(PCI_REG_DATA + (offset & 3)); |
| break; |
| case PCI_SIZE_16: |
| *valuep = inw(PCI_REG_DATA + (offset & 2)); |
| break; |
| case PCI_SIZE_32: |
| *valuep = inl(PCI_REG_DATA); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| int pci_x86_write_config(pci_dev_t bdf, uint offset, ulong value, |
| enum pci_size_t size) |
| { |
| outl(bdf | (offset & 0xfc) | PCI_CFG_EN, PCI_REG_ADDR); |
| switch (size) { |
| case PCI_SIZE_8: |
| outb(value, PCI_REG_DATA + (offset & 3)); |
| break; |
| case PCI_SIZE_16: |
| outw(value, PCI_REG_DATA + (offset & 2)); |
| break; |
| case PCI_SIZE_32: |
| outl(value, PCI_REG_DATA); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| int pci_x86_clrset_config(pci_dev_t bdf, uint offset, ulong clr, ulong set, |
| enum pci_size_t size) |
| { |
| ulong value; |
| int ret; |
| |
| ret = pci_x86_read_config(bdf, offset, &value, size); |
| if (ret) |
| return ret; |
| value &= ~clr; |
| value |= set; |
| |
| return pci_x86_write_config(bdf, offset, value, size); |
| } |
| |
| void pci_assign_irqs(int bus, int device, u8 irq[4]) |
| { |
| pci_dev_t bdf; |
| int func; |
| u16 vendor; |
| u8 pin, line; |
| |
| for (func = 0; func < 8; func++) { |
| bdf = PCI_BDF(bus, device, func); |
| pci_read_config16(bdf, PCI_VENDOR_ID, &vendor); |
| if (vendor == 0xffff || vendor == 0x0000) |
| continue; |
| |
| pci_read_config8(bdf, PCI_INTERRUPT_PIN, &pin); |
| |
| /* PCI spec says all values except 1..4 are reserved */ |
| if ((pin < 1) || (pin > 4)) |
| continue; |
| |
| line = irq[pin - 1]; |
| if (!line) |
| continue; |
| |
| debug("Assigning IRQ %d to PCI device %d.%x.%d (INT%c)\n", |
| line, bus, device, func, 'A' + pin - 1); |
| |
| pci_write_config8(bdf, PCI_INTERRUPT_LINE, line); |
| } |
| } |