| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com> |
| * Copyright (C) 2016 Stefan Roese <sr@denx.de> |
| */ |
| |
| /dts-v1/; |
| |
| #include <asm/arch-baytrail/fsp/fsp_configs.h> |
| #include <dt-bindings/gpio/x86-gpio.h> |
| #include <dt-bindings/interrupt-router/intel-irq.h> |
| |
| /include/ "skeleton.dtsi" |
| /include/ "serial.dtsi" |
| /include/ "reset.dtsi" |
| /include/ "rtc.dtsi" |
| /include/ "tsc_timer.dtsi" |
| |
| #include "smbios.dtsi" |
| |
| / { |
| model = "congatec-QEVAL20-QA3-E3845"; |
| compatible = "congatec,qeval20-qa3-e3845", "intel,baytrail"; |
| |
| aliases { |
| serial0 = &serial; |
| spi0 = &spi; |
| }; |
| |
| config { |
| silent_console = <0>; |
| }; |
| |
| pch_pinctrl { |
| compatible = "intel,x86-pinctrl"; |
| reg = <0 0>; |
| |
| /* |
| * As of today, the latest version FSP (gold4) for BayTrail |
| * misses the PAD configuration of the SD controller's Card |
| * Detect signal. The default PAD value for the CD pin sets |
| * the pin to work in GPIO mode, which causes card detect |
| * status cannot be reflected by the Present State register |
| * in the SD controller (bit 16 & bit 18 are always zero). |
| * |
| * Configure this pin to function 1 (SD controller). |
| */ |
| sdmmc3_cd@0 { |
| pad-offset = <0x3a0>; |
| mode-func = <1>; |
| }; |
| |
| /* Add SMBus PAD configuration */ |
| smbus_clk@0 { |
| pad-offset = <0x580>; |
| mode-func = <1>; |
| }; |
| |
| smbus_data@0 { |
| pad-offset = <0x5a0>; |
| mode-func = <1>; |
| }; |
| }; |
| |
| chosen { |
| stdout-path = "/serial"; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "intel,baytrail-cpu"; |
| reg = <0>; |
| intel,apic-id = <0>; |
| }; |
| |
| cpu@1 { |
| device_type = "cpu"; |
| compatible = "intel,baytrail-cpu"; |
| reg = <1>; |
| intel,apic-id = <2>; |
| }; |
| |
| cpu@2 { |
| device_type = "cpu"; |
| compatible = "intel,baytrail-cpu"; |
| reg = <2>; |
| intel,apic-id = <4>; |
| }; |
| |
| cpu@3 { |
| device_type = "cpu"; |
| compatible = "intel,baytrail-cpu"; |
| reg = <3>; |
| intel,apic-id = <6>; |
| }; |
| }; |
| |
| pci { |
| compatible = "intel,pci-baytrail", "pci-x86"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| u-boot,dm-pre-reloc; |
| ranges = <0x02000000 0x0 0x80000000 0x80000000 0 0x40000000 |
| 0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000 |
| 0x01000000 0x0 0x2000 0x2000 0 0xe000>; |
| |
| pch@1f,0 { |
| reg = <0x0000f800 0 0 0 0>; |
| compatible = "pci8086,0f1c", "intel,pch9"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| irq-router { |
| compatible = "intel,irq-router"; |
| intel,pirq-config = "ibase"; |
| intel,ibase-offset = <0x50>; |
| intel,actl-addr = <0>; |
| intel,pirq-link = <8 8>; |
| intel,pirq-mask = <0xdee0>; |
| intel,pirq-routing = < |
| /* BayTrail PCI devices */ |
| PCI_BDF(0, 2, 0) INTA PIRQA |
| PCI_BDF(0, 3, 0) INTA PIRQA |
| PCI_BDF(0, 16, 0) INTA PIRQA |
| PCI_BDF(0, 17, 0) INTA PIRQA |
| PCI_BDF(0, 18, 0) INTA PIRQA |
| PCI_BDF(0, 19, 0) INTA PIRQA |
| PCI_BDF(0, 20, 0) INTA PIRQA |
| PCI_BDF(0, 21, 0) INTA PIRQA |
| PCI_BDF(0, 22, 0) INTA PIRQA |
| PCI_BDF(0, 23, 0) INTA PIRQA |
| PCI_BDF(0, 24, 0) INTA PIRQA |
| PCI_BDF(0, 24, 1) INTC PIRQC |
| PCI_BDF(0, 24, 2) INTD PIRQD |
| PCI_BDF(0, 24, 3) INTB PIRQB |
| PCI_BDF(0, 24, 4) INTA PIRQA |
| PCI_BDF(0, 24, 5) INTC PIRQC |
| PCI_BDF(0, 24, 6) INTD PIRQD |
| PCI_BDF(0, 24, 7) INTB PIRQB |
| PCI_BDF(0, 26, 0) INTA PIRQA |
| PCI_BDF(0, 27, 0) INTA PIRQA |
| PCI_BDF(0, 28, 0) INTA PIRQA |
| PCI_BDF(0, 28, 1) INTB PIRQB |
| PCI_BDF(0, 28, 2) INTC PIRQC |
| PCI_BDF(0, 28, 3) INTD PIRQD |
| PCI_BDF(0, 29, 0) INTA PIRQA |
| PCI_BDF(0, 30, 0) INTA PIRQA |
| PCI_BDF(0, 30, 1) INTD PIRQD |
| PCI_BDF(0, 30, 2) INTB PIRQB |
| PCI_BDF(0, 30, 3) INTC PIRQC |
| PCI_BDF(0, 30, 4) INTD PIRQD |
| PCI_BDF(0, 30, 5) INTB PIRQB |
| PCI_BDF(0, 31, 3) INTB PIRQB |
| |
| /* |
| * PCIe root ports downstream |
| * interrupts |
| */ |
| PCI_BDF(1, 0, 0) INTA PIRQA |
| PCI_BDF(1, 0, 0) INTB PIRQB |
| PCI_BDF(1, 0, 0) INTC PIRQC |
| PCI_BDF(1, 0, 0) INTD PIRQD |
| PCI_BDF(2, 0, 0) INTA PIRQB |
| PCI_BDF(2, 0, 0) INTB PIRQC |
| PCI_BDF(2, 0, 0) INTC PIRQD |
| PCI_BDF(2, 0, 0) INTD PIRQA |
| PCI_BDF(3, 0, 0) INTA PIRQC |
| PCI_BDF(3, 0, 0) INTB PIRQD |
| PCI_BDF(3, 0, 0) INTC PIRQA |
| PCI_BDF(3, 0, 0) INTD PIRQB |
| PCI_BDF(4, 0, 0) INTA PIRQD |
| PCI_BDF(4, 0, 0) INTB PIRQA |
| PCI_BDF(4, 0, 0) INTC PIRQB |
| PCI_BDF(4, 0, 0) INTD PIRQC |
| >; |
| }; |
| |
| spi: spi { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "intel,ich9-spi"; |
| spi-flash@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0>; |
| compatible = "stmicro,n25q064a", |
| "jedec,spi-nor"; |
| memory-map = <0xff800000 0x00800000>; |
| rw-mrc-cache { |
| label = "rw-mrc-cache"; |
| reg = <0x006f0000 0x00010000>; |
| }; |
| }; |
| }; |
| |
| gpioa { |
| compatible = "intel,ich6-gpio"; |
| u-boot,dm-pre-reloc; |
| reg = <0 0x20>; |
| bank-name = "A"; |
| use-lvl-write-cache; |
| }; |
| |
| gpiob { |
| compatible = "intel,ich6-gpio"; |
| u-boot,dm-pre-reloc; |
| reg = <0x20 0x20>; |
| bank-name = "B"; |
| use-lvl-write-cache; |
| }; |
| |
| gpioc { |
| compatible = "intel,ich6-gpio"; |
| u-boot,dm-pre-reloc; |
| reg = <0x40 0x20>; |
| bank-name = "C"; |
| use-lvl-write-cache; |
| }; |
| |
| gpiod { |
| compatible = "intel,ich6-gpio"; |
| u-boot,dm-pre-reloc; |
| reg = <0x60 0x20>; |
| bank-name = "D"; |
| use-lvl-write-cache; |
| }; |
| |
| gpioe { |
| compatible = "intel,ich6-gpio"; |
| u-boot,dm-pre-reloc; |
| reg = <0x80 0x20>; |
| bank-name = "E"; |
| use-lvl-write-cache; |
| }; |
| |
| gpiof { |
| compatible = "intel,ich6-gpio"; |
| u-boot,dm-pre-reloc; |
| reg = <0xA0 0x20>; |
| bank-name = "F"; |
| use-lvl-write-cache; |
| }; |
| }; |
| }; |
| |
| fsp { |
| compatible = "intel,baytrail-fsp"; |
| fsp,mrc-init-tseg-size = <MRC_INIT_TSEG_SIZE_1MB>; |
| fsp,mrc-init-mmio-size = <MRC_INIT_MMIO_SIZE_2048MB>; |
| fsp,mrc-init-spd-addr1 = <0xa0>; |
| fsp,mrc-init-spd-addr2 = <0xa2>; |
| fsp,emmc-boot-mode = <EMMC_BOOT_MODE_AUTO>; |
| fsp,enable-sdio; |
| fsp,enable-sdcard; |
| fsp,enable-hsuart1; |
| fsp,enable-spi; |
| fsp,enable-sata; |
| fsp,sata-mode = <SATA_MODE_AHCI>; |
| #ifdef CONFIG_USB_XHCI_HCD |
| fsp,enable-xhci; |
| #endif |
| fsp,lpe-mode = <LPE_MODE_PCI>; |
| fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>; |
| fsp,enable-dma0; |
| fsp,enable-dma1; |
| fsp,enable-pwm0; |
| fsp,enable-pwm1; |
| fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>; |
| fsp,aperture-size = <APERTURE_SIZE_256MB>; |
| fsp,gtt-size = <GTT_SIZE_2MB>; |
| fsp,scc-mode = <SCC_MODE_PCI>; |
| fsp,os-selection = <OS_SELECTION_LINUX>; |
| fsp,emmc45-ddr50-enabled; |
| fsp,emmc45-retune-timer-value = <8>; |
| fsp,enable-igd; |
| fsp,enable-memory-down; |
| fsp,memory-down-params { |
| compatible = "intel,baytrail-fsp-mdp"; |
| fsp,dram-speed = <DRAM_SPEED_1333MTS>; |
| fsp,dram-type = <DRAM_TYPE_DDR3L>; |
| fsp,dimm-0-enable; |
| fsp,dimm-1-enable; |
| fsp,dimm-width = <DIMM_WIDTH_X16>; |
| fsp,dimm-density = <DIMM_DENSITY_4GBIT>; |
| fsp,dimm-bus-width = <DIMM_BUS_WIDTH_64BITS>; |
| fsp,dimm-sides = <DIMM_SIDES_1RANKS>; |
| |
| /* These following values might need a re-visit */ |
| fsp,dimm-tcl = <8>; |
| fsp,dimm-trpt-rcd = <8>; |
| fsp,dimm-twr = <8>; |
| fsp,dimm-twtr = <4>; |
| fsp,dimm-trrd = <6>; |
| fsp,dimm-trtp = <4>; |
| fsp,dimm-tfaw = <22>; |
| }; |
| }; |
| |
| microcode { |
| update@0 { |
| #include "microcode/m0130673325.dtsi" |
| }; |
| update@1 { |
| #include "microcode/m0130679907.dtsi" |
| }; |
| }; |
| }; |