| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * siemens rut |
| * (C) Copyright 2013 Siemens Schweiz AG |
| * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. |
| * |
| * Based on: |
| * U-Boot file:/include/configs/am335x_evm.h |
| * |
| * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ |
| */ |
| |
| #ifndef __CONFIG_RUT_H |
| #define __CONFIG_RUT_H |
| |
| #include "siemens-am33x-common.h" |
| |
| #define RUT_IOCTRL_VAL 0x18b |
| #define DDR_PLL_FREQ 303 |
| |
| /* Physical Memory Map */ |
| #define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MiB */ |
| |
| /* Watchdog */ |
| #define WATCHDOG_TRIGGER_GPIO 14 |
| |
| /* Use common default */ |
| |
| /* Default env settings */ |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "hostname=rut\0" \ |
| "ubi_off=2048\0"\ |
| "nand_img_size=0x500000\0" \ |
| "splashpos=m,m\0" \ |
| "optargs=fixrtc --no-log consoleblank=0 \0" \ |
| CFG_ENV_SETTINGS_V1 \ |
| CFG_ENV_SETTINGS_NAND_V1 \ |
| "mmc_dev=0\0" \ |
| "mmc_root=/dev/mmcblk0p2 rw\0" \ |
| "mmc_root_fs_type=ext4 rootwait\0" \ |
| "mmc_load_uimage=" \ |
| "mmc rescan; " \ |
| "setenv bootfile uImage;" \ |
| "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \ |
| "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \ |
| "importbootenv=echo Importing environment from mmc ...; " \ |
| "env import -t $loadaddr $filesize\0" \ |
| "mmc_args=run bootargs_defaults;" \ |
| "mtdparts default;" \ |
| "setenv bootargs ${bootargs} " \ |
| "root=${mmc_root} ${mtdparts}" \ |
| "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \ |
| "eth=${ethaddr} " \ |
| "\0" \ |
| "mmc_boot=run mmc_args; " \ |
| "run mmc_load_uimage; " \ |
| "bootm ${kloadaddr}\0" \ |
| "" |
| |
| #endif /* ! __CONFIG_RUT_H */ |