| /* |
| * Copyright (C) 2016-2017 Intel Corporation |
| * |
| * SPDX-License-Identifier: GPL-2.0 |
| */ |
| |
| #include <altera.h> |
| #include <common.h> |
| #include <errno.h> |
| #include <fdtdec.h> |
| #include <miiphy.h> |
| #include <netdev.h> |
| #include <ns16550.h> |
| #include <watchdog.h> |
| #include <asm/arch/misc.h> |
| #include <asm/arch/pinmux.h> |
| #include <asm/arch/reset_manager.h> |
| #include <asm/arch/sdram_arria10.h> |
| #include <asm/arch/system_manager.h> |
| #include <asm/arch/nic301.h> |
| #include <asm/io.h> |
| #include <asm/pl310.h> |
| |
| #define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q1_3 0x08 |
| #define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q2_11 0x58 |
| #define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q3_3 0x68 |
| #define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q1_7 0x18 |
| #define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q3_7 0x78 |
| #define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q4_3 0x98 |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #if defined(CONFIG_SPL_BUILD) |
| static struct pl310_regs *const pl310 = |
| (struct pl310_regs *)CONFIG_SYS_PL310_BASE; |
| static const struct socfpga_noc_fw_ocram *noc_fw_ocram_base = |
| (void *)SOCFPGA_SDR_FIREWALL_OCRAM_ADDRESS; |
| #endif |
| |
| static struct socfpga_system_manager *sysmgr_regs = |
| (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS; |
| |
| /* |
| * DesignWare Ethernet initialization |
| */ |
| #ifdef CONFIG_ETH_DESIGNWARE |
| void dwmac_deassert_reset(const unsigned int of_reset_id, |
| const u32 phymode) |
| { |
| u32 reset; |
| |
| if (of_reset_id == EMAC0_RESET) { |
| reset = SOCFPGA_RESET(EMAC0); |
| } else if (of_reset_id == EMAC1_RESET) { |
| reset = SOCFPGA_RESET(EMAC1); |
| } else if (of_reset_id == EMAC2_RESET) { |
| reset = SOCFPGA_RESET(EMAC2); |
| } else { |
| printf("GMAC: Invalid reset ID (%i)!\n", of_reset_id); |
| return; |
| } |
| |
| clrsetbits_le32(&sysmgr_regs->emac[of_reset_id - EMAC0_RESET], |
| SYSMGR_EMACGRP_CTRL_PHYSEL_MASK, |
| phymode); |
| |
| /* Release the EMAC controller from reset */ |
| socfpga_per_reset(reset, 0); |
| } |
| #endif |
| |
| #if defined(CONFIG_SPL_BUILD) |
| /* |
| + * This function initializes security policies to be consistent across |
| + * all logic units in the Arria 10. |
| + * |
| + * The idea is to set all security policies to be normal, nonsecure |
| + * for all units. |
| + */ |
| static void initialize_security_policies(void) |
| { |
| /* Put OCRAM in non-secure */ |
| writel(0x003f0000, &noc_fw_ocram_base->region0); |
| writel(0x1, &noc_fw_ocram_base->enable); |
| } |
| |
| int arch_early_init_r(void) |
| { |
| initialize_security_policies(); |
| |
| /* Configure the L2 controller to make SDRAM start at 0 */ |
| writel(0x1, &pl310->pl310_addr_filter_start); |
| |
| /* assert reset to all except L4WD0 and L4TIMER0 */ |
| socfpga_per_reset_all(); |
| |
| /* configuring the clock based on handoff */ |
| /* TODO: Add call to cm_basic_init() */ |
| |
| /* Add device descriptor to FPGA device table */ |
| socfpga_fpga_add(); |
| return 0; |
| } |
| #else |
| int arch_early_init_r(void) |
| { |
| return 0; |
| } |
| #endif |
| |
| /* |
| * This function looking the 1st encounter UART peripheral, |
| * and then return its offset of the dedicated/shared IO pin |
| * mux. offset value (zero and above). |
| */ |
| static int find_peripheral_uart(const void *blob, |
| int child, const char *node_name) |
| { |
| int len; |
| fdt_addr_t base_addr = 0; |
| fdt_size_t size; |
| const u32 *cell; |
| u32 value, offset = 0; |
| |
| base_addr = fdtdec_get_addr_size(blob, child, "reg", &size); |
| if (base_addr != FDT_ADDR_T_NONE) { |
| cell = fdt_getprop(blob, child, "pinctrl-single,pins", |
| &len); |
| if (cell != NULL) { |
| for (; len > 0; len -= (2 * sizeof(u32))) { |
| offset = fdt32_to_cpu(*cell++); |
| value = fdt32_to_cpu(*cell++); |
| /* Found UART peripheral. */ |
| if (value == PINMUX_UART) |
| return offset; |
| } |
| } |
| } |
| return -EINVAL; |
| } |
| |
| /* |
| * This function looks up the 1st encounter UART peripheral, |
| * and then return its offset of the dedicated/shared IO pin |
| * mux. UART peripheral is found if the offset is not in negative |
| * value. |
| */ |
| static int is_peripheral_uart_true(const void *blob, |
| int node, const char *child_name) |
| { |
| int child, len; |
| const char *node_name; |
| |
| child = fdt_first_subnode(blob, node); |
| |
| if (child < 0) |
| return -EINVAL; |
| |
| node_name = fdt_get_name(blob, child, &len); |
| |
| while (node_name) { |
| if (!strcmp(child_name, node_name)) |
| return find_peripheral_uart(blob, child, node_name); |
| |
| child = fdt_next_subnode(blob, child); |
| if (child < 0) |
| break; |
| |
| node_name = fdt_get_name(blob, child, &len); |
| } |
| |
| return -1; |
| } |
| |
| /* |
| * This function looking the 1st encounter UART dedicated IO peripheral, |
| * and then return based address of the 1st encounter UART dedicated |
| * IO peripheral. |
| */ |
| unsigned int dedicated_uart_com_port(const void *blob) |
| { |
| int node; |
| |
| node = fdtdec_next_compatible(blob, 0, |
| COMPAT_ALTERA_SOCFPGA_PINCTRL_SINGLE); |
| if (node < 0) |
| return 0; |
| |
| if (is_peripheral_uart_true(blob, node, "dedicated") >= 0) |
| return SOCFPGA_UART1_ADDRESS; |
| |
| return 0; |
| } |
| |
| /* |
| * This function looking the 1st encounter UART shared IO peripheral, and then |
| * return based address of the 1st encounter UART shared IO peripheral. |
| */ |
| unsigned int shared_uart_com_port(const void *blob) |
| { |
| int node, ret; |
| |
| node = fdtdec_next_compatible(blob, 0, |
| COMPAT_ALTERA_SOCFPGA_PINCTRL_SINGLE); |
| if (node < 0) |
| return 0; |
| |
| ret = is_peripheral_uart_true(blob, node, "shared"); |
| |
| if (ret == PINMUX_UART0_TX_SHARED_IO_OFFSET_Q1_3 || |
| ret == PINMUX_UART0_TX_SHARED_IO_OFFSET_Q2_11 || |
| ret == PINMUX_UART0_TX_SHARED_IO_OFFSET_Q3_3) |
| return SOCFPGA_UART0_ADDRESS; |
| else if (ret == PINMUX_UART1_TX_SHARED_IO_OFFSET_Q1_7 || |
| ret == PINMUX_UART1_TX_SHARED_IO_OFFSET_Q3_7 || |
| ret == PINMUX_UART1_TX_SHARED_IO_OFFSET_Q4_3) |
| return SOCFPGA_UART1_ADDRESS; |
| |
| return 0; |
| } |
| |
| /* |
| * This function looking the 1st encounter UART peripheral, and then return |
| * base address of the 1st encounter UART peripheral. |
| */ |
| unsigned int uart_com_port(const void *blob) |
| { |
| unsigned int ret; |
| |
| ret = dedicated_uart_com_port(blob); |
| |
| if (ret) |
| return ret; |
| |
| return shared_uart_com_port(blob); |
| } |
| |
| /* |
| * Print CPU information |
| */ |
| #if defined(CONFIG_DISPLAY_CPUINFO) |
| int print_cpuinfo(void) |
| { |
| const u32 bsel = |
| SYSMGR_GET_BOOTINFO_BSEL(readl(&sysmgr_regs->bootinfo)); |
| |
| puts("CPU: Altera SoCFPGA Arria 10\n"); |
| |
| printf("BOOT: %s\n", bsel_str[bsel].name); |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_ARCH_MISC_INIT |
| int arch_misc_init(void) |
| { |
| return 0; |
| } |
| #endif |