| /* |
| * National Semiconductor DP83848 PHY Driver for TI DaVinci |
| * (TMS320DM644x) based boards. |
| * |
| * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> |
| * |
| * -------------------------------------------------------- |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <net.h> |
| #include <dp83848.h> |
| #include <asm/arch/emac_defs.h> |
| |
| #ifdef CONFIG_DRIVER_TI_EMAC |
| |
| #ifdef CONFIG_CMD_NET |
| |
| int dp83848_is_phy_connected(int phy_addr) |
| { |
| u_int16_t id1, id2; |
| |
| if (!dm644x_eth_phy_read(phy_addr, DP83848_PHYID1_REG, &id1)) |
| return(0); |
| if (!dm644x_eth_phy_read(phy_addr, DP83848_PHYID2_REG, &id2)) |
| return(0); |
| |
| if ((id1 == DP83848_PHYID1_OUI) && (id2 == DP83848_PHYID2_OUI)) |
| return(1); |
| |
| return(0); |
| } |
| |
| int dp83848_get_link_speed(int phy_addr) |
| { |
| u_int16_t tmp; |
| volatile emac_regs* emac = (emac_regs *)EMAC_BASE_ADDR; |
| |
| if (!dm644x_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp)) |
| return(0); |
| |
| if (!(tmp & DP83848_LINK_STATUS)) /* link up? */ |
| return(0); |
| |
| if (!dm644x_eth_phy_read(phy_addr, DP83848_PHY_STAT_REG, &tmp)) |
| return(0); |
| |
| /* Speed doesn't matter, there is no setting for it in EMAC... */ |
| if (tmp & DP83848_SPEED) { |
| if (tmp & DP83848_DUPLEX) { |
| /* set DM644x EMAC for Full Duplex */ |
| emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE; |
| } else { |
| /*set DM644x EMAC for Half Duplex */ |
| emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE; |
| } |
| |
| return(1); |
| } else { |
| if (tmp & DP83848_DUPLEX) { |
| /* set DM644x EMAC for Full Duplex */ |
| emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE; |
| } else { |
| /*set DM644x EMAC for Half Duplex */ |
| emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE; |
| } |
| |
| return(1); |
| } |
| |
| return(0); |
| } |
| |
| |
| int dp83848_init_phy(int phy_addr) |
| { |
| int ret = 1; |
| |
| if (!dp83848_get_link_speed(phy_addr)) { |
| /* Try another time */ |
| udelay(100000); |
| ret = dp83848_get_link_speed(phy_addr); |
| } |
| |
| /* Disable PHY Interrupts */ |
| dm644x_eth_phy_write(phy_addr, DP83848_PHY_INTR_CTRL_REG, 0); |
| |
| return(ret); |
| } |
| |
| |
| int dp83848_auto_negotiate(int phy_addr) |
| { |
| u_int16_t tmp; |
| |
| |
| if (!dm644x_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp)) |
| return(0); |
| |
| /* Restart Auto_negotiation */ |
| tmp &= ~DP83848_AUTONEG; /* remove autonegotiation enable */ |
| tmp |= DP83848_ISOLATE; /* Electrically isolate PHY */ |
| dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp); |
| |
| /* Set the Auto_negotiation Advertisement Register |
| * MII advertising for Next page, 100BaseTxFD and HD, |
| * 10BaseTFD and HD, IEEE 802.3 |
| */ |
| tmp = DP83848_NP | DP83848_TX_FDX | DP83848_TX_HDX | |
| DP83848_10_FDX | DP83848_10_HDX | DP83848_AN_IEEE_802_3; |
| dm644x_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp); |
| |
| |
| /* Read Control Register */ |
| if (!dm644x_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp)) |
| return(0); |
| |
| tmp |= DP83848_SPEED_SELECT | DP83848_AUTONEG | DP83848_DUPLEX_MODE; |
| dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp); |
| |
| /* Restart Auto_negotiation */ |
| tmp |= DP83848_RESTART_AUTONEG; |
| dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp); |
| |
| /*check AutoNegotiate complete */ |
| udelay(10000); |
| if (!dm644x_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp)) |
| return(0); |
| |
| if (!(tmp & DP83848_AUTONEG_COMP)) |
| return(0); |
| |
| return (dp83848_get_link_speed(phy_addr)); |
| } |
| |
| #endif /* CONFIG_CMD_NET */ |
| |
| #endif /* CONFIG_DRIVER_ETHER */ |