blob: 60981f9f5653ca8b9b0eb6b44bb39f0c21d1ca7d [file] [log] [blame]
/*
* Balloon3 configuration file
*
* Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Board Configuration Options
*/
#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */
#define CONFIG_BALLOON3 1 /* Balloon3 board */
/*
* Environment settings
*/
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SYS_MALLOC_LEN (128*1024)
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_BOOTCOMMAND \
"fpga load 0x0 0x50000 0x62638; " \
"if usb reset && fatload usb 0 0xa4000000 uImage; then " \
"bootm 0xa4000000; " \
"fi; " \
"bootm 0xd0000;"
#define CONFIG_BOOTARGS "console=tty0 console=ttyS2,115200"
#define CONFIG_TIMESTAMP
#define CONFIG_BOOTDELAY 2 /* Autoboot delay */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_SYS_TEXT_BASE 0x0
#define CONFIG_LZMA /* LZMA compression support */
/*
* Serial Console Configuration
*/
#define CONFIG_PXA_SERIAL
#define CONFIG_STUART 1
#define CONFIG_CONS_INDEX 2
#define CONFIG_BAUDRATE 115200
/*
* Bootloader Components Configuration
*/
#include <config_cmd_default.h>
#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_ENV
#undef CONFIG_CMD_IMLS
#define CONFIG_CMD_USB
#define CONFIG_CMD_FPGA
#define CONFIG_CMD_FPGA_LOADMK
#undef CONFIG_LCD
/*
* KGDB
*/
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */
#endif
/*
* HUSH Shell Configuration
*/
#define CONFIG_SYS_HUSH_PARSER 1
#define CONFIG_SYS_LONGHELP
#ifdef CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT "$ "
#else
#endif
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_PBSIZE \
(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_DEVICE_NULLDEV 1
/*
* Clock Configuration
*/
#define CONFIG_SYS_CPUSPEED 0x290 /* 520MHz */
/*
* DRAM Map
*/
#define CONFIG_NR_DRAM_BANKS 3 /* 3 banks of DRAM */
#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
#define PHYS_SDRAM_2 0xb0000000 /* SDRAM Bank #2 */
#define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */
#define PHYS_SDRAM_3 0x80000000 /* SDRAM Bank #3 */
#define PHYS_SDRAM_3_SIZE 0x08000000 /* 128 MB */
#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */
#define CONFIG_SYS_DRAM_SIZE 0x18000000 /* 384 MB DRAM */
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR 0xa1000000
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_SP_ADDR \
(PHYS_SDRAM_1 + GENERATED_GBL_DATA_SIZE + 2048)
/*
* NOR FLASH
*/
#ifdef CONFIG_CMD_FLASH
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER 1
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_MAX_FLASH_SECT 256
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
#define CONFIG_SYS_FLASH_ERASE_TOUT 240000
#define CONFIG_SYS_FLASH_WRITE_TOUT 240000
#define CONFIG_SYS_FLASH_LOCK_TOUT 240000
#define CONFIG_SYS_FLASH_UNLOCK_TOUT 240000
#define CONFIG_SYS_FLASH_PROTECTION
#define CONFIG_ENV_IS_IN_FLASH
#else
#define CONFIG_SYS_NO_FLASH
#define CONFIG_ENV_IS_NOWHERE
#endif
#define CONFIG_SYS_MONITOR_BASE 0x000000
#define CONFIG_SYS_MONITOR_LEN 0x40000
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_ENV_ADDR 0x40000
#define CONFIG_ENV_SECT_SIZE 0x10000
/*
* GPIO settings
*/
#define CONFIG_SYS_GPSR0_VAL 0x307dc7fd
#define CONFIG_SYS_GPSR1_VAL 0x03cffa4e
#define CONFIG_SYS_GPSR2_VAL 0x7131c000
#define CONFIG_SYS_GPSR3_VAL 0x01e1f3ff
#define CONFIG_SYS_GPCR0_VAL 0x0
#define CONFIG_SYS_GPCR1_VAL 0x0
#define CONFIG_SYS_GPCR2_VAL 0x0
#define CONFIG_SYS_GPCR3_VAL 0x0
#define CONFIG_SYS_GPDR0_VAL 0xc0f98e02
#define CONFIG_SYS_GPDR1_VAL 0xfcffa8b7
#define CONFIG_SYS_GPDR2_VAL 0x22e3ffff
#define CONFIG_SYS_GPDR3_VAL 0x000201fe
#define CONFIG_SYS_GAFR0_L_VAL 0x96c00000
#define CONFIG_SYS_GAFR0_U_VAL 0xa5e5459b
#define CONFIG_SYS_GAFR1_L_VAL 0x699b759a
#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5a5aa
#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa
#define CONFIG_SYS_GAFR2_U_VAL 0x01f9a6aa
#define CONFIG_SYS_GAFR3_L_VAL 0x54510003
#define CONFIG_SYS_GAFR3_U_VAL 0x00001599
#define CONFIG_SYS_PSSR_VAL 0x30
/*
* Clock settings
*/
#define CONFIG_SYS_CKEN 0xffffffff
#define CONFIG_SYS_CCCR 0x00000290
/*
* Memory settings
*/
#define CONFIG_SYS_MSC0_VAL 0x7ff07ff8
#define CONFIG_SYS_MSC1_VAL 0x7ff07ff0
#define CONFIG_SYS_MSC2_VAL 0x74a42491
#define CONFIG_SYS_MDCNFG_VAL 0x89d309d3
#define CONFIG_SYS_MDREFR_VAL 0x001d8018
#define CONFIG_SYS_MDMRS_VAL 0x00220022
#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
#define CONFIG_SYS_SXCNFG_VAL 0x00000000
/*
* PCMCIA and CF Interfaces
*/
#define CONFIG_SYS_MECR_VAL 0x00000000
#define CONFIG_SYS_MCMEM0_VAL 0x00014307
#define CONFIG_SYS_MCMEM1_VAL 0x00014307
#define CONFIG_SYS_MCATT0_VAL 0x0001c787
#define CONFIG_SYS_MCATT1_VAL 0x0001c787
#define CONFIG_SYS_MCIO0_VAL 0x0001430f
#define CONFIG_SYS_MCIO1_VAL 0x0001430f
/*
* LCD
*/
#ifdef CONFIG_LCD
#define CONFIG_BALLOON3LCD
#define CONFIG_VIDEO_LOGO
#define CONFIG_CMD_BMP
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_VIDEO_BMP_GZIP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)
#endif
/*
* USB
*/
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_OHCI_NEW
#define CONFIG_SYS_USB_OHCI_CPU_INIT
#define CONFIG_SYS_USB_OHCI_BOARD_INIT
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "balloon3"
#define CONFIG_USB_STORAGE
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT2
#endif
/*
* FPGA
*/
#ifdef CONFIG_CMD_FPGA
#define CONFIG_FPGA
#define CONFIG_FPGA_XILINX
#define CONFIG_FPGA_SPARTAN3
#define CONFIG_SYS_FPGA_PROG_FEEDBACK
#define CONFIG_SYS_FPGA_WAIT 1000
#define CONFIG_MAX_FPGA_DEVICES 1
#endif
#endif /* __CONFIG_H */