| # |
| # Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> |
| # |
| # SPDX-License-Identifier: GPL-2.0+ |
| # |
| |
| if VENDOR_INTEL |
| |
| choice |
| prompt "Mainboard model" |
| optional |
| |
| config TARGET_BAYLEYBAY |
| bool "Bayley Bay" |
| help |
| This is the Intel Bayley Bay Customer Reference Board. It contains an |
| Intel quad-core Atom Processor E3800 with dual-channel DDR3L SODIMM |
| 4GB memory, HDMI/DP/VGA display, HD audio, SATA, USB2, USB3, SD, eMMC, |
| PCIe and some other sensor interfaces. |
| |
| config TARGET_COUGARCANYON2 |
| bool "Cougar Canyon 2" |
| help |
| This is the Intel Cougar Canyon 2 Customer Reference Board. It |
| is built on the Chief River platform with Intel Ivybridge Processor |
| and Panther Point chipset. The board has 4GB RAM, with some other |
| peripheral connectors for PCIe/SATA/USB2/USB3/LAN/UART/PS2/VGA/HDMI. |
| |
| config TARGET_CROWNBAY |
| bool "Crown Bay" |
| help |
| This is the Intel Crown Bay Customer Reference Board. It contains |
| the Intel Atom Processor E6xx populated on the COM Express module |
| with 1GB DDR2 soldered down memory and a carrier board with the |
| Intel Platform Controller Hub EG20T, other system components and |
| peripheral connectors for PCIe/SATA/USB/LAN/SD/UART/Audio/LVDS. |
| |
| config TARGET_GALILEO |
| bool "Galileo" |
| help |
| This is the Intel Galileo board, which is the first in a family of |
| Arduino-certified development and prototyping boards based on Intel |
| architecture. It includes an Intel Quark SoC X1000 processor, a 32-bit |
| single-core, single-thread, Intel Pentium processor instrunction set |
| architecture (ISA) compatible, operating at speeds up to 400Mhz, |
| along with 256MB DDR3 memory. It supports a wide range of industry |
| standard I/O interfaces, including a full-sized mini-PCIe slot, |
| one 100Mb Ethernet port, a microSD card slot, a USB host port and |
| a USB client port. |
| |
| config TARGET_MINNOWMAX |
| bool "Minnowboard MAX" |
| help |
| This is the Intel Minnowboard MAX. It contains an Atom E3800 |
| processor in a small form factor with Ethernet, micro-SD, USB 2, |
| USB 3, SATA, serial console, some GPIOs and HDMI 1.3 video out. |
| It requires some binary blobs - see README.x86 for details. |
| |
| Note that PCIE_ECAM_BASE is set up by the FSP so the value used |
| by U-Boot matches that value. |
| |
| endchoice |
| |
| source "board/intel/bayleybay/Kconfig" |
| source "board/intel/cougarcanyon2/Kconfig" |
| source "board/intel/crownbay/Kconfig" |
| source "board/intel/galileo/Kconfig" |
| source "board/intel/minnowmax/Kconfig" |
| |
| endif |