| /* |
| * MISC driver for TI MUSB Glue. |
| * |
| * (C) Copyright 2016 |
| * Texas Instruments Incorporated, <www.ti.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| #include <common.h> |
| #include <command.h> |
| #include <console.h> |
| #include <dm.h> |
| #include <linux/usb/otg.h> |
| #include <dm/device-internal.h> |
| #include <dm/lists.h> |
| |
| #include <asm/io.h> |
| #include <asm/omap_musb.h> |
| #include "musb_uboot.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #ifdef CONFIG_DM_USB |
| |
| /* USB 2.0 PHY Control */ |
| #define CM_PHY_PWRDN (1 << 0) |
| #define CM_PHY_OTG_PWRDN (1 << 1) |
| #define OTGVDET_EN (1 << 19) |
| #define OTGSESSENDEN (1 << 20) |
| |
| #define AM335X_USB1_CTRL 0x8 |
| |
| struct ti_musb_platdata { |
| void *base; |
| void *ctrl_mod_base; |
| struct musb_hdrc_platform_data plat; |
| struct musb_hdrc_config musb_config; |
| struct omap_musb_board_data otg_board_data; |
| }; |
| |
| static int ti_musb_get_usb_index(int node) |
| { |
| const void *fdt = gd->fdt_blob; |
| int i = 0; |
| char path[64]; |
| const char *alias_path; |
| char alias[16]; |
| |
| fdt_get_path(fdt, node, path, sizeof(path)); |
| |
| do { |
| snprintf(alias, sizeof(alias), "usb%d", i); |
| alias_path = fdt_get_alias(fdt, alias); |
| if (alias_path == NULL) { |
| debug("USB index not found\n"); |
| return -ENOENT; |
| } |
| |
| if (!strcmp(path, alias_path)) |
| return i; |
| |
| i++; |
| } while (alias_path); |
| |
| return -ENOENT; |
| } |
| |
| static void ti_musb_set_phy_power(struct udevice *dev, u8 on) |
| { |
| struct ti_musb_platdata *platdata = dev_get_platdata(dev); |
| |
| if (on) { |
| clrsetbits_le32(platdata->ctrl_mod_base, |
| CM_PHY_PWRDN | CM_PHY_OTG_PWRDN, |
| OTGVDET_EN | OTGSESSENDEN); |
| } else { |
| clrsetbits_le32(platdata->ctrl_mod_base, 0, |
| CM_PHY_PWRDN | CM_PHY_OTG_PWRDN); |
| } |
| } |
| |
| static int ti_musb_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct ti_musb_platdata *platdata = dev_get_platdata(dev); |
| const void *fdt = gd->fdt_blob; |
| int node = dev_of_offset(dev); |
| int phys; |
| int ctrl_mod; |
| int usb_index; |
| |
| platdata->base = (void *)devfdt_get_addr_index(dev, 1); |
| |
| phys = fdtdec_lookup_phandle(fdt, node, "phys"); |
| ctrl_mod = fdtdec_lookup_phandle(fdt, phys, "ti,ctrl_mod"); |
| platdata->ctrl_mod_base = (void *)fdtdec_get_addr(fdt, ctrl_mod, "reg"); |
| usb_index = ti_musb_get_usb_index(node); |
| switch (usb_index) { |
| case 1: |
| platdata->ctrl_mod_base += AM335X_USB1_CTRL; |
| case 0: |
| default: |
| break; |
| } |
| |
| platdata->musb_config.multipoint = fdtdec_get_int(fdt, node, |
| "mentor,multipoint", |
| -1); |
| if (platdata->musb_config.multipoint < 0) { |
| error("MUSB multipoint DT entry missing\n"); |
| return -ENOENT; |
| } |
| |
| platdata->musb_config.dyn_fifo = 1; |
| |
| platdata->musb_config.num_eps = fdtdec_get_int(fdt, node, |
| "mentor,num-eps", -1); |
| if (platdata->musb_config.num_eps < 0) { |
| error("MUSB num-eps DT entry missing\n"); |
| return -ENOENT; |
| } |
| |
| platdata->musb_config.ram_bits = fdtdec_get_int(fdt, node, |
| "mentor,ram-bits", -1); |
| if (platdata->musb_config.ram_bits < 0) { |
| error("MUSB ram-bits DT entry missing\n"); |
| return -ENOENT; |
| } |
| |
| platdata->otg_board_data.set_phy_power = ti_musb_set_phy_power; |
| platdata->otg_board_data.dev = dev; |
| platdata->plat.config = &platdata->musb_config; |
| |
| platdata->plat.power = fdtdec_get_int(fdt, node, "mentor,power", -1); |
| if (platdata->plat.power < 0) { |
| error("MUSB mentor,power DT entry missing\n"); |
| return -ENOENT; |
| } |
| |
| platdata->plat.platform_ops = &musb_dsps_ops; |
| platdata->plat.board_data = &platdata->otg_board_data; |
| |
| return 0; |
| } |
| |
| static int ti_musb_host_probe(struct udevice *dev) |
| { |
| struct musb_host_data *host = dev_get_priv(dev); |
| struct ti_musb_platdata *platdata = dev_get_platdata(dev); |
| struct usb_bus_priv *priv = dev_get_uclass_priv(dev); |
| struct omap_musb_board_data *otg_board_data; |
| int ret; |
| |
| priv->desc_before_addr = true; |
| |
| otg_board_data = &platdata->otg_board_data; |
| |
| host->host = musb_init_controller(&platdata->plat, |
| (struct device *)otg_board_data, |
| platdata->base); |
| if (!host->host) |
| return -EIO; |
| |
| ret = musb_lowlevel_init(host); |
| |
| return ret; |
| } |
| |
| static int ti_musb_host_remove(struct udevice *dev) |
| { |
| struct musb_host_data *host = dev_get_priv(dev); |
| |
| musb_stop(host->host); |
| |
| return 0; |
| } |
| |
| static int ti_musb_host_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct ti_musb_platdata *platdata = dev_get_platdata(dev); |
| const void *fdt = gd->fdt_blob; |
| int node = dev_of_offset(dev); |
| int ret; |
| |
| ret = ti_musb_ofdata_to_platdata(dev); |
| if (ret) { |
| error("platdata dt parse error\n"); |
| return ret; |
| } |
| |
| platdata->plat.mode = MUSB_HOST; |
| |
| return 0; |
| } |
| |
| U_BOOT_DRIVER(ti_musb_host) = { |
| .name = "ti-musb-host", |
| .id = UCLASS_USB, |
| .ofdata_to_platdata = ti_musb_host_ofdata_to_platdata, |
| .probe = ti_musb_host_probe, |
| .remove = ti_musb_host_remove, |
| .ops = &musb_usb_ops, |
| .platdata_auto_alloc_size = sizeof(struct ti_musb_platdata), |
| .priv_auto_alloc_size = sizeof(struct musb_host_data), |
| }; |
| |
| static int ti_musb_wrapper_bind(struct udevice *parent) |
| { |
| const void *fdt = gd->fdt_blob; |
| int node; |
| int ret; |
| |
| for (node = fdt_first_subnode(fdt, dev_of_offset(parent)); node > 0; |
| node = fdt_next_subnode(fdt, node)) { |
| struct udevice *dev; |
| const char *name = fdt_get_name(fdt, node, NULL); |
| enum usb_dr_mode dr_mode; |
| struct driver *drv; |
| |
| if (strncmp(name, "usb@", 4)) |
| continue; |
| |
| dr_mode = usb_get_dr_mode(node); |
| switch (dr_mode) { |
| case USB_DR_MODE_PERIPHERAL: |
| /* Bind MUSB device */ |
| break; |
| case USB_DR_MODE_HOST: |
| /* Bind MUSB host */ |
| ret = device_bind_driver_to_node(parent, "ti-musb-host", |
| name, offset_to_ofnode(node), &dev); |
| if (ret) { |
| error("musb - not able to bind usb host node\n"); |
| return ret; |
| } |
| break; |
| default: |
| break; |
| }; |
| } |
| return 0; |
| } |
| |
| static const struct udevice_id ti_musb_ids[] = { |
| { .compatible = "ti,am33xx-usb" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(ti_musb_wrapper) = { |
| .name = "ti-musb-wrapper", |
| .id = UCLASS_MISC, |
| .of_match = ti_musb_ids, |
| .bind = ti_musb_wrapper_bind, |
| }; |
| |
| #endif /* CONFIG_DM_USB */ |