| /* |
| * (C) Copyright 2000-2010 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com> |
| * Andreas Heppel <aheppel@sysgo.de> |
| * |
| * (C) Copyright 2008 Atmel Corporation |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| #include <common.h> |
| #include <dm.h> |
| #include <environment.h> |
| #include <malloc.h> |
| #include <spi.h> |
| #include <spi_flash.h> |
| #include <search.h> |
| #include <errno.h> |
| #include <dm/device-internal.h> |
| |
| #ifndef CONFIG_ENV_SPI_BUS |
| # define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS |
| #endif |
| #ifndef CONFIG_ENV_SPI_CS |
| # define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS |
| #endif |
| #ifndef CONFIG_ENV_SPI_MAX_HZ |
| # define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED |
| #endif |
| #ifndef CONFIG_ENV_SPI_MODE |
| # define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE |
| #endif |
| |
| #ifndef CONFIG_SPL_BUILD |
| #define CMD_SAVEENV |
| #endif |
| |
| #ifdef CONFIG_ENV_OFFSET_REDUND |
| #ifdef CMD_SAVEENV |
| static ulong env_offset = CONFIG_ENV_OFFSET; |
| static ulong env_new_offset = CONFIG_ENV_OFFSET_REDUND; |
| #endif |
| |
| #define ACTIVE_FLAG 1 |
| #define OBSOLETE_FLAG 0 |
| #endif /* CONFIG_ENV_OFFSET_REDUND */ |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static struct spi_flash *env_flash; |
| |
| static int setup_flash_device(void) |
| { |
| #ifdef CONFIG_DM_SPI_FLASH |
| struct udevice *new; |
| int ret; |
| |
| /* speed and mode will be read from DT */ |
| ret = spi_flash_probe_bus_cs(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS, |
| 0, 0, &new); |
| if (ret) { |
| set_default_env("!spi_flash_probe_bus_cs() failed"); |
| return 1; |
| } |
| |
| env_flash = dev_get_uclass_priv(new); |
| #else |
| |
| if (!env_flash) { |
| env_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, |
| CONFIG_ENV_SPI_CS, |
| CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE); |
| if (!env_flash) { |
| set_default_env("!spi_flash_probe() failed"); |
| return 1; |
| } |
| } |
| #endif |
| return 0; |
| } |
| |
| #if defined(CONFIG_ENV_OFFSET_REDUND) |
| #ifdef CMD_SAVEENV |
| static int env_sf_save(void) |
| { |
| env_t env_new; |
| char *saved_buffer = NULL, flag = OBSOLETE_FLAG; |
| u32 saved_size, saved_offset, sector; |
| int ret; |
| |
| ret = setup_flash_device(); |
| if (ret) |
| return ret; |
| |
| ret = env_export(&env_new); |
| if (ret) |
| return ret; |
| env_new.flags = ACTIVE_FLAG; |
| |
| if (gd->env_valid == ENV_VALID) { |
| env_new_offset = CONFIG_ENV_OFFSET_REDUND; |
| env_offset = CONFIG_ENV_OFFSET; |
| } else { |
| env_new_offset = CONFIG_ENV_OFFSET; |
| env_offset = CONFIG_ENV_OFFSET_REDUND; |
| } |
| |
| /* Is the sector larger than the env (i.e. embedded) */ |
| if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) { |
| saved_size = CONFIG_ENV_SECT_SIZE - CONFIG_ENV_SIZE; |
| saved_offset = env_new_offset + CONFIG_ENV_SIZE; |
| saved_buffer = memalign(ARCH_DMA_MINALIGN, saved_size); |
| if (!saved_buffer) { |
| ret = 1; |
| goto done; |
| } |
| ret = spi_flash_read(env_flash, saved_offset, |
| saved_size, saved_buffer); |
| if (ret) |
| goto done; |
| } |
| |
| sector = DIV_ROUND_UP(CONFIG_ENV_SIZE, CONFIG_ENV_SECT_SIZE); |
| |
| puts("Erasing SPI flash..."); |
| ret = spi_flash_erase(env_flash, env_new_offset, |
| sector * CONFIG_ENV_SECT_SIZE); |
| if (ret) |
| goto done; |
| |
| puts("Writing to SPI flash..."); |
| |
| ret = spi_flash_write(env_flash, env_new_offset, |
| CONFIG_ENV_SIZE, &env_new); |
| if (ret) |
| goto done; |
| |
| if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) { |
| ret = spi_flash_write(env_flash, saved_offset, |
| saved_size, saved_buffer); |
| if (ret) |
| goto done; |
| } |
| |
| ret = spi_flash_write(env_flash, env_offset + offsetof(env_t, flags), |
| sizeof(env_new.flags), &flag); |
| if (ret) |
| goto done; |
| |
| puts("done\n"); |
| |
| gd->env_valid = gd->env_valid == ENV_REDUND ? ENV_VALID : ENV_REDUND; |
| |
| printf("Valid environment: %d\n", (int)gd->env_valid); |
| |
| done: |
| if (saved_buffer) |
| free(saved_buffer); |
| |
| return ret; |
| } |
| #endif /* CMD_SAVEENV */ |
| |
| static void env_sf_load(void) |
| { |
| int ret; |
| int crc1_ok = 0, crc2_ok = 0; |
| env_t *tmp_env1 = NULL; |
| env_t *tmp_env2 = NULL; |
| env_t *ep = NULL; |
| |
| tmp_env1 = (env_t *)memalign(ARCH_DMA_MINALIGN, |
| CONFIG_ENV_SIZE); |
| tmp_env2 = (env_t *)memalign(ARCH_DMA_MINALIGN, |
| CONFIG_ENV_SIZE); |
| if (!tmp_env1 || !tmp_env2) { |
| set_default_env("!malloc() failed"); |
| goto out; |
| } |
| |
| ret = setup_flash_device(); |
| if (ret) |
| goto out; |
| |
| ret = spi_flash_read(env_flash, CONFIG_ENV_OFFSET, |
| CONFIG_ENV_SIZE, tmp_env1); |
| if (ret) { |
| set_default_env("!spi_flash_read() failed"); |
| goto err_read; |
| } |
| |
| if (crc32(0, tmp_env1->data, ENV_SIZE) == tmp_env1->crc) |
| crc1_ok = 1; |
| |
| ret = spi_flash_read(env_flash, CONFIG_ENV_OFFSET_REDUND, |
| CONFIG_ENV_SIZE, tmp_env2); |
| if (!ret) { |
| if (crc32(0, tmp_env2->data, ENV_SIZE) == tmp_env2->crc) |
| crc2_ok = 1; |
| } |
| |
| if (!crc1_ok && !crc2_ok) { |
| set_default_env("!bad CRC"); |
| goto err_read; |
| } else if (crc1_ok && !crc2_ok) { |
| gd->env_valid = ENV_VALID; |
| } else if (!crc1_ok && crc2_ok) { |
| gd->env_valid = ENV_REDUND; |
| } else if (tmp_env1->flags == ACTIVE_FLAG && |
| tmp_env2->flags == OBSOLETE_FLAG) { |
| gd->env_valid = ENV_VALID; |
| } else if (tmp_env1->flags == OBSOLETE_FLAG && |
| tmp_env2->flags == ACTIVE_FLAG) { |
| gd->env_valid = ENV_REDUND; |
| } else if (tmp_env1->flags == tmp_env2->flags) { |
| gd->env_valid = ENV_VALID; |
| } else if (tmp_env1->flags == 0xFF) { |
| gd->env_valid = ENV_VALID; |
| } else if (tmp_env2->flags == 0xFF) { |
| gd->env_valid = ENV_REDUND; |
| } else { |
| /* |
| * this differs from code in env_flash.c, but I think a sane |
| * default path is desirable. |
| */ |
| gd->env_valid = ENV_VALID; |
| } |
| |
| if (gd->env_valid == ENV_VALID) |
| ep = tmp_env1; |
| else |
| ep = tmp_env2; |
| |
| ret = env_import((char *)ep, 0); |
| if (!ret) { |
| error("Cannot import environment: errno = %d\n", errno); |
| set_default_env("!env_import failed"); |
| } |
| |
| err_read: |
| spi_flash_free(env_flash); |
| env_flash = NULL; |
| out: |
| free(tmp_env1); |
| free(tmp_env2); |
| } |
| #else |
| #ifdef CMD_SAVEENV |
| static int env_sf_save(void) |
| { |
| u32 saved_size, saved_offset, sector; |
| char *saved_buffer = NULL; |
| int ret = 1; |
| env_t env_new; |
| |
| ret = setup_flash_device(); |
| if (ret) |
| return ret; |
| |
| /* Is the sector larger than the env (i.e. embedded) */ |
| if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) { |
| saved_size = CONFIG_ENV_SECT_SIZE - CONFIG_ENV_SIZE; |
| saved_offset = CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE; |
| saved_buffer = malloc(saved_size); |
| if (!saved_buffer) |
| goto done; |
| |
| ret = spi_flash_read(env_flash, saved_offset, |
| saved_size, saved_buffer); |
| if (ret) |
| goto done; |
| } |
| |
| ret = env_export(&env_new); |
| if (ret) |
| goto done; |
| |
| sector = DIV_ROUND_UP(CONFIG_ENV_SIZE, CONFIG_ENV_SECT_SIZE); |
| |
| puts("Erasing SPI flash..."); |
| ret = spi_flash_erase(env_flash, CONFIG_ENV_OFFSET, |
| sector * CONFIG_ENV_SECT_SIZE); |
| if (ret) |
| goto done; |
| |
| puts("Writing to SPI flash..."); |
| ret = spi_flash_write(env_flash, CONFIG_ENV_OFFSET, |
| CONFIG_ENV_SIZE, &env_new); |
| if (ret) |
| goto done; |
| |
| if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) { |
| ret = spi_flash_write(env_flash, saved_offset, |
| saved_size, saved_buffer); |
| if (ret) |
| goto done; |
| } |
| |
| ret = 0; |
| puts("done\n"); |
| |
| done: |
| if (saved_buffer) |
| free(saved_buffer); |
| |
| return ret; |
| } |
| #endif /* CMD_SAVEENV */ |
| |
| static void env_sf_load(void) |
| { |
| int ret; |
| char *buf = NULL; |
| |
| buf = (char *)memalign(ARCH_DMA_MINALIGN, CONFIG_ENV_SIZE); |
| if (!buf) { |
| set_default_env("!malloc() failed"); |
| return; |
| } |
| |
| ret = setup_flash_device(); |
| if (ret) |
| goto out; |
| |
| ret = spi_flash_read(env_flash, |
| CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, buf); |
| if (ret) { |
| set_default_env("!spi_flash_read() failed"); |
| goto err_read; |
| } |
| |
| ret = env_import(buf, 1); |
| if (ret) |
| gd->env_valid = ENV_VALID; |
| |
| err_read: |
| spi_flash_free(env_flash); |
| env_flash = NULL; |
| out: |
| free(buf); |
| } |
| #endif |
| |
| U_BOOT_ENV_LOCATION(sf) = { |
| .location = ENVL_SPI_FLASH, |
| ENV_NAME("SPI Flash") |
| .load = env_sf_load, |
| #ifdef CMD_SAVEENV |
| .save = env_save_ptr(env_sf_save), |
| #endif |
| }; |