| // SPDX-License-Identifier: GPL-2.0+ OR X11 |
| /* |
| * P4080/P4040 Silicon/SoC Device Tree Source (pre include) |
| * |
| * Copyright 2011 - 2015 Freescale Semiconductor Inc. |
| * Copyright 2019-2020 NXP |
| */ |
| |
| /dts-v1/; |
| |
| /include/ "e500mc_power_isa.dtsi" |
| |
| / { |
| compatible = "fsl,P4080"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| interrupt-parent = <&mpic>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: PowerPC,e500mc@0 { |
| device_type = "cpu"; |
| reg = <0>; |
| fsl,portid-mapping = <0x80000000>; |
| }; |
| cpu1: PowerPC,e500mc@1 { |
| device_type = "cpu"; |
| reg = <1>; |
| fsl,portid-mapping = <0x40000000>; |
| }; |
| cpu2: PowerPC,e500mc@2 { |
| device_type = "cpu"; |
| reg = <2>; |
| fsl,portid-mapping = <0x20000000>; |
| }; |
| cpu3: PowerPC,e500mc@3 { |
| device_type = "cpu"; |
| reg = <3>; |
| fsl,portid-mapping = <0x10000000>; |
| }; |
| cpu4: PowerPC,e500mc@4 { |
| device_type = "cpu"; |
| reg = <4>; |
| fsl,portid-mapping = <0x08000000>; |
| }; |
| cpu5: PowerPC,e500mc@5 { |
| device_type = "cpu"; |
| reg = <5>; |
| fsl,portid-mapping = <0x04000000>; |
| }; |
| cpu6: PowerPC,e500mc@6 { |
| device_type = "cpu"; |
| reg = <6>; |
| fsl,portid-mapping = <0x02000000>; |
| }; |
| cpu7: PowerPC,e500mc@7 { |
| device_type = "cpu"; |
| reg = <7>; |
| fsl,portid-mapping = <0x01000000>; |
| }; |
| }; |
| |
| soc: soc@ffe000000 { |
| ranges = <0x00000000 0xf 0xfe000000 0x1000000>; |
| reg = <0xf 0xfe000000 0 0x00001000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| compatible = "simple-bus"; |
| |
| mpic: pic@40000 { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <4>; |
| reg = <0x40000 0x40000>; |
| compatible = "fsl,mpic", "chrp,open-pic"; |
| device_type = "open-pic"; |
| clock-frequency = <0x0>; |
| }; |
| |
| espi0: spi@110000 { |
| compatible = "fsl,mpc8536-espi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x110000 0x1000>; |
| fsl,espi-num-chipselects = <4>; |
| status = "disabled"; |
| }; |
| |
| esdhc: esdhc@114000 { |
| compatible = "fsl,esdhc"; |
| reg = <0x114000 0x1000>; |
| clock-frequency = <0>; |
| }; |
| |
| usb0@210000 { |
| compatible = "fsl-usb2-mph"; |
| reg = <0x210000 0x1000>; |
| phy_type = "ulpi"; |
| }; |
| |
| usb1@211000 { |
| compatible = "fsl-usb2-dr"; |
| reg = <0x211000 0x1000>; |
| phy_type = "ulpi"; |
| }; |
| /include/ "qoriq-i2c-0.dtsi" |
| /include/ "qoriq-i2c-1.dtsi" |
| }; |
| |
| pcie@ffe200000 { |
| compatible = "fsl,pcie-p4080", "fsl,pcie-fsl-qoriq"; |
| reg = <0xf 0xfe200000 0x0 0x1000>; /* registers */ |
| law_trgt_if = <0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| ranges = <0x01000000 0x0 0x00000000 0xf 0xf8000000 0x0 0x00010000 /* downstream I/O */ |
| 0x02000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000>; /* non-prefetchable memory */ |
| }; |
| |
| pcie@ffe201000 { |
| compatible = "fsl,pcie-p4080", "fsl,pcie-fsl-qoriq"; |
| reg = <0xf 0xfe201000 0x0 0x1000>; /* registers */ |
| law_trgt_if = <1>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| ranges = <0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000 /* downstream I/O */ |
| 0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000>; /* non-prefetchable memory */ |
| }; |
| |
| pcie@ffe202000 { |
| compatible = "fsl,pcie-p4080", "fsl,pcie-fsl-qoriq"; |
| reg = <0xf 0xfe202000 0x0 0x1000>; /* registers */ |
| law_trgt_if = <2>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| ranges = <0x01000000 0x0 0x00000000 0xf 0xf8020000 0x0 0x00010000 /* downstream I/O */ |
| 0x02000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000>; /* non-prefetchable memory */ |
| }; |
| }; |