| commit 19cf2ec90d8ce52da60c1693693c4048cb810967 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Apr 26 01:25:39 2008 +0200 |
| |
| post/Makefile: make sure to use the correct flags |
| |
| ARFLAGS was not set, which caused "ppc_8xx-ar: creating libgenpost.a" |
| messages to be printed. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 7ed4011733e7dca8f64d21291e4294662f7dc3e2 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Apr 26 00:34:42 2008 +0200 |
| |
| Coding Style cleanup, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f9204e15173834ff8d123e36279ce49c3c6c74fc |
| Author: Magnus Lilja <lilja.magnus@gmail.com> |
| Date: Sun Apr 20 10:38:12 2008 +0200 |
| |
| i.MX31: Enable SPI and MC13783/RTC support for the Litekit board |
| |
| This patch enables SPI and MC13783/RTC support for the Litekit board. |
| |
| Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> |
| |
| commit f97abbfb47d9e407354e157cae3f6369e460cd37 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Apr 25 01:08:32 2008 -0500 |
| |
| MPC8544DS: decode pcie3 end-point configuration correctly. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 292188e15523c165c4269403fdcd33c26d89176e |
| Author: Roy Zang <tie-fei.zang@freescale.com> |
| Date: Fri Apr 25 00:55:09 2008 -0500 |
| |
| MPC8544DS: Removes the unknown flash message information |
| |
| This patch removes the unknown flash message information: |
| '## Unknown FLASH on Bank 1 - Size = 0xdeadbeef = -286261248 MB' |
| This unknown flash message is caused by PromJet. |
| Some of the board user is unhappy with this information. |
| |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit b2115757403beef0ac6bc2c6c3b24f31256a75d2 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Apr 24 14:07:38 2008 -0500 |
| |
| mpc83xx: bump loadaddr over fdtaddr to 0x500000 |
| |
| this seems as a good compromise between human memory, typing, |
| and last but not least, to accommodate for current and future kernel bloat. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| Acked-by: Dave Liu <daveliu@freescale.com> |
| |
| commit be5a7190265a34d968578ff266549c60f6f57654 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Apr 15 13:12:23 2008 +0800 |
| |
| mpc83xx: clean up the readme for 83xx boards |
| |
| 1. correct the typo |
| 2. correct the memory map for 837xerdb board |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit bcae52a6819ee9dad5d0d96cd7daeb20108d45ff |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Apr 15 13:11:11 2008 +0800 |
| |
| mpc83xx: remove the unused CPM's stuff |
| |
| The MPC83xx family never have CPM block, so remove it from 83xx. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit c63ad6325a8ac0097a54b418a3288926b0484b18 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Apr 18 16:29:40 2008 +0200 |
| |
| cfi-flash: Add CFG_FLASH_AUTOPROTECT_LIST |
| |
| This patch adds a configurable flash auto protection list that can be used |
| to make U-Boot protect flash regions in flash_init(). |
| |
| The idea has been discussed on the u-boot mailing list starting |
| on Nov 18th, 2007. |
| |
| Even this patch brings a new feature it is used as a bugfix for 4xx |
| platforms where flash_init() does not completely protect the |
| monitor's flash range in all situations. |
| |
| U-Boot protects the flash range from CFG_MONITOR_BASE to |
| (CFG_MONITOR_BASE + monitor_flash_len - 1) by default. This does not |
| include the reset vector at 0xfffffffc. |
| |
| Example: |
| #define CFG_FLASH_AUTOPROTECT_LIST {{0xfff80000, 0x80000}} |
| |
| This config option will auto protect the last 512k of flash that |
| contains the bootloader on board like APC405 and PMC405. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit d0d91ae3acb4f29d1a2a3a766747478ed54e2848 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Apr 25 13:59:03 2008 +0200 |
| |
| ppc4xx: Remove double defines in lwmon5.h |
| |
| introduced with latest lwmon5/POST merge |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7590378fb9c686709492ceb142825cd058255956 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Apr 25 13:54:02 2008 +0200 |
| |
| Use watchdog-aware functions when calculating hashes of images - take two |
| |
| Some files didn't get updated properly with the "Use watchdog-aware |
| functions when calculating hashes of images" commit, this commit |
| fixes this. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 8e048c438e20ec89b49da5f085f8f756eba6e587 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Apr 25 12:01:39 2008 +0200 |
| |
| ppc4xx: Add bootcount limit handling for APC405 boards |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 1de6b28be5d107ae90ad7a8a43653c49966e8afe |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Apr 25 12:10:09 2008 +0200 |
| |
| Use watchdog-aware functions when calculating hashes of images |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit d00ce09040d3100e2c7998ef56db62c2d20d9ee3 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Apr 25 12:44:08 2008 +0200 |
| |
| USB: fix more GCC 4.2.x aliasing warnings |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| Acked-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit aff4f86448f6586930f0a3be7fc4b0ddcf450980 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Apr 25 12:41:53 2008 +0200 |
| |
| lib_generic/crc32.c: add missing #include <watchdog.h> |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 03ccdbcd5602610cea4bd0db7e48e1ef881a51ef |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Apr 25 11:52:21 2008 +0200 |
| |
| lib_generic/crc32.c: fix compile problem |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 24bfedbd0be4dcaa94861407820d6a70fea7e03b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Apr 22 12:20:32 2008 +0200 |
| |
| ppc4xx: Pass PCIe root-complex/endpoint configuration to Linux via the fdt |
| |
| The PCIe root-complex/endpoint setup as configured via the "pcie_mode" |
| environment variable will now get passed to the Linux kernel by setting |
| the device_type property of the PCIe device tree node. For normal root- |
| complex configuration it will keep its defaults value of "pci" and for |
| endpoint configuration it will get changed to "pci-endpoint". |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit eb0615bf600d2caf5aa2958f47f5ba364c52d5e7 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Thu Apr 24 10:30:53 2008 +0200 |
| |
| lwmon5: watchdog POST fix |
| |
| Use the GPT0_MASKx registers as the temporary storage for watch-dog |
| timer POST test instead of GPT0_COMPx. The latter |
| (GPT0_COMP1..GPT0_COMP5) are used for the log-buffer header. |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 78e488298824bc150b5f3ebf7958cd71fa2af1b9 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Mon Apr 21 18:10:14 2008 -0500 |
| |
| lib_ppc: Revert "Make MPC83xx one step closer to full relocation." |
| |
| This reverts commit 70431e8a7393b6b793f77957f95b999fc9a269b8 which has |
| proven problematic getting right from the start at least on 83xx and |
| 4xx. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit a99715b8ebfc500f3f40e01b36b64d473938443d |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Fri Apr 18 14:50:01 2008 +0200 |
| |
| Realining some header definitions. |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit 4acbc6c7f993cae409c424615415a3e76820f13d |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Thu Apr 24 07:57:16 2008 +0200 |
| |
| NE2000: coding style cleanup |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit b4aff1ffaf7120032c653357c007faa14f74d29d |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Apr 23 00:11:47 2008 +0900 |
| |
| qemu-mips.h: Add CFI support |
| |
| CONFIG_ENV_OVERWRITE is also added. |
| |
| This patch is originally created by Jean-Christophe PLAGNIOL-VILLARD. |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 4a1f11b45a82908e5b0df602d703082413a6b7ed |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Apr 22 22:47:27 2008 +0900 |
| |
| doc/README.mips: Add MIPS notes |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 215b01bba8bc662d35f72b084700b192d367dfb4 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Apr 22 12:27:56 2008 +0200 |
| |
| Add support for calculating hashes with watchdog triggering |
| |
| Implement watchodg-aware variants of hash calculation functions: |
| - crc32_wd() |
| - md5_wd() |
| - sha1_csum_wd() |
| The above functions calculate the hash of the input buffer in chunks, |
| triggering the watchdog after processing each chunk. The chunk size |
| is given as a function call parameter. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 8875e3abab986df930167ce5c1ac4f95dcacc81c |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Wed Apr 23 11:02:12 2008 +0900 |
| |
| qemu-mips: Cleanup whitespace, indentation, etc. |
| |
| No functional change. |
| |
| This patch was originally submitted by Jean-Christophe PLAGNIOL-VILLARD. |
| Then I re-created from scratch, and changed more lines than the original. |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 386563197e3a50b0e97ad9aae87f57d9aab909ab |
| Author: Vlad Lungu <vlad@comsys.ro> |
| Date: Wed Oct 10 23:02:09 2007 +0300 |
| |
| Fixed pcnet io_base |
| |
| Bus and phys address are not always the same |
| |
| Signed-off-by: Vlad Lungu <vlad@comsys.ro> |
| |
| commit 11ea26fd1cb63c91403fe04a6eea975cd418603f |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Apr 24 23:44:26 2008 +0200 |
| |
| drivers/net/pcnet.c: Coding Style cleanup. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 899ef7b84578b7cafadfd78488c2fd2aac93f636 |
| Author: Vlad Lungu <vlad@comsys.ro> |
| Date: Wed Oct 10 23:04:23 2007 +0300 |
| |
| Added Am79C970A chip id to pcnet |
| |
| Signed-off-by: Vlad Lungu <vlad@comsys.ro> |
| |
| commit 17c9de6bb33f676eb776dcbfc46fc1b14c3871a5 |
| Author: Magnus Lilja <lilja.magnus@gmail.com> |
| Date: Sun Apr 20 10:35:03 2008 +0200 |
| |
| i.MX31: Fix architecture numbers for ADS and Litekit boards |
| |
| Correct the Linux architecture number for i.MX31 Litekit and ADS boards. |
| |
| Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> |
| |
| commit e7ae84d6c7288790e88639f57cb60daf89c11369 |
| Author: Magnus Lilja <lilja.magnus@gmail.com> |
| Date: Sun Apr 20 10:36:36 2008 +0200 |
| |
| i.MX31: Use symbolic names for Litekit membases. |
| |
| Use symbolic names instead of hard coded addresses for Litekit membases. |
| |
| Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> |
| |
| commit 2ef1d9b6030d02f576b1bcd9fec948e602522012 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Apr 19 17:59:20 2008 +0200 |
| |
| Fix show_boot_progress prototype |
| |
| in commit fad634071 "make show_boot_progress () weak." |
| show_boot_progress is supposed to be declared as weak but declared as |
| inline instead. |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit edbed247a14d70b94958010f736621212285de91 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Apr 18 12:39:23 2008 +0200 |
| |
| Memory footprint optimizations |
| |
| As suggested by Wolfgang Denk: |
| - image printing functions: |
| - remove wrappers |
| - remove indentation prefix from functions' signatures |
| - merge getenv_verify and getenv_autostart into one parametrized function |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 0a0b606faaec4afb3f750b09aa4df1e40a39dcb8 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Tue Apr 15 13:33:11 2008 +0200 |
| |
| MX31ADS environment variable update, spi and rtc support |
| |
| Update MX31ADS default environment to better match the flash layout and |
| the memory map, support SPI and RTC. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 022f12163595b9a55380c6d77c3119b93d6a9a4b |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Apr 21 09:28:36 2008 -0500 |
| |
| 85xx: Round up frequency calculations to get reasonable output |
| |
| eg. because of rounding error we can get 799Mhz instead of 800Mhz. |
| |
| Introduced DIV_ROUND_UP and roundup taken from linux kernel. |
| |
| Signed-off-by: Dejan Minic <minic@freescale.com> |
| Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 876b8f978982216ab4a22dcd9efddfcd9b0e04e6 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Apr 23 16:58:04 2008 -0500 |
| |
| fsl_pci: Only modify registers if we have them |
| |
| pme_msg_det exists only on PCIe controllers only set it if we are a "bridge". |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 83fe32334337def160b302aa9d152d808bfcc68e |
| Author: Markus Klotzbücher <mk@denx.de> |
| Date: Wed Apr 23 10:57:33 2008 +0200 |
| |
| USB: remove a cpu bug workaround for an unsupported architecture. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit f957576cb53e6cfab412709cfc8db1afd39d21c3 |
| Author: Markus Klotzbücher <mk@denx.de> |
| Date: Wed Apr 23 10:53:23 2008 +0200 |
| |
| USB: fix those pesky aliasing warnings issued by gcc-4.2 |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit 89cdab788f3716b335fefb60b836ebcf975aceab |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Mar 31 11:02:01 2008 -0400 |
| |
| crc32: use uint32_t rather than unsigned long |
| |
| The envcrc.c does sizeof(unsigned long) when calculating the crc, but |
| this is done with the build toolchain instead of the target tool |
| chain, so if the build is a 64bit system but the target is 32bits, |
| the size will obviously be wrong. This converts all unsigned long |
| stuff related to crc32 to uint32_t types. Compile tested only: output |
| of ./tools/envcrc when run on a 32bit build system matches that of a |
| 64bit build system. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 80c40b765b3642ddb9f3392b7898715aab44a29c |
| Author: Dirk Behme <dirk.behme@googlemail.com> |
| Date: Wed Mar 26 09:53:29 2008 +0100 |
| |
| ARM: Davinci: Fix DM644x timer overflow handling and cleanup |
| |
| Fix ARM based DaVinci DM644x timer overflow handling and cleanup timer code. |
| |
| Changes: |
| |
| - Remove *_masked() functions as noted by Wolfgang |
| |
| - Adapt register naming to recent TI spec (sprue26, March 2007) |
| |
| - Fix reset_timer() handling |
| |
| - As reported by Pieter [1] the overflow fix introduced a delay of factor 16 (e.g 2 seconds became 32). While the overflow fix is basically okay, it missed to divide udelay by 16, too. Fix this. |
| |
| [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179 |
| |
| - Remove software division of timer count value (DIV(x) macro) and do it in hardware (TIM_CLK_DIV). |
| |
| Many thanks to Troy Kisky <troy.kisky@boundarydevices.com> and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for the hints & testing! |
| |
| Patch is compile tested with davinci_dvevm & sonata & schmoogie configuration and tested by Pieter on DaVinci EVM hardware. |
| |
| Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> |
| |
| commit a6e6fc610e39dec41b79680413d4ed38145bd3c8 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Wed Apr 9 16:09:41 2008 +0200 |
| |
| Added watchdog triggering calls in the "mtest" test function. |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| |
| commit d32a874b9b4c1e949ee38be7790f6bf6d6143451 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Sun Apr 6 19:19:14 2008 +0200 |
| |
| lwmon5 watchdog: limit trigger rate |
| |
| Limit the rate of h/w watch-dog triggering on the LWMON5 board by |
| the CONFIG_WD_MAX_RATE value. |
| |
| Note that an earlier version of this patch which used microseconds |
| instead of ticks dis not work. The problem was that we used |
| usec2ticks() to convert microseconds into ticks. usec2ticks() uses |
| get_tbclk(), which in turn calls get_sys_info(). It turns out that |
| this function does a lot of prolonged operations (like divisions) |
| which take too much time so we do not trigger the watchdog in time, |
| and it resets the system. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 2d2b994a30bb100774dc747ae9865b7f95285a88 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Mon Mar 31 10:51:37 2008 +0200 |
| |
| POST: move CONFIG_POST to Makefiles |
| |
| Introduce the new logical option CONFIG_HAS_POST which is set when the |
| platform has CONFIG_POST set. Use CONFIG_HAS_POST in the post/ Makefiles |
| to determine should the POST libs be compiled for the selected target |
| platform, or not. |
| |
| To avoid breaking u-boot linking process, the empty post/libpost.a file is |
| created for platforms which do not have POSTs. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 0a51e9248e2d27e0a02ef1e740c576ce90a39ee1 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Mon Mar 31 10:49:34 2008 +0200 |
| |
| POST: preparations for moving CONFIG_POST to Makefiles |
| |
| Remove CONFIG_POST ifdefs from the post/ source files. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5d40d4430d9ebc8434c6f0798594836e1efa7a1e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Apr 22 14:14:20 2008 +0200 |
| |
| ppc4xx: Fix Canyonlands and Glacier default environment for fdt usage |
| |
| This patch fixes the Canyonlands and Glacier default environment to better |
| fit to the arch/powerpc device-tree kernels. The variables dealing with |
| arch/ppc booting are removed, since these boards are supported only in |
| arch/powerpc. Glacier uses the same config file as Canyonlands. |
| |
| Also, the Glacier now uses non-FPU rootpath, since 460GT has no FPU. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit b789cb4a4c0c1deff82053539cfe29a9c6e23f8b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Apr 22 14:06:42 2008 +0200 |
| |
| ppc4xx: Small coding style cleanup for the latest esd patches |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 79941d63bc03aed8c48d7602f18217cc200ee931 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Apr 21 18:01:07 2008 +0200 |
| |
| ppc4xx: Update CPU strapping for PMC440 boards |
| |
| This patch removes the temporary 'test' strapping option |
| of the sbe command. The '667' strapping option now uses |
| a PLB/PCI divider of 3. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit f00cf3193a6635355b121e90debb2f54e777e7da |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Apr 21 14:42:21 2008 +0200 |
| |
| ppc4xx: Remove unused APC405 strataflash driver |
| |
| The APC405 board support has been migrated to use the common |
| CFI flash driver. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 1c686676a86473bbd92151f0544e109413f6ed06 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Apr 21 14:42:17 2008 +0200 |
| |
| ppc4xx: Update APC405 configuration |
| |
| - enable esd's auto_update mechanism |
| - support alternative flash layout on rev. 1.8 boards |
| - update default environment |
| - use common CFI flash driver |
| - coding style cleanup |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 0b9872515a521bf7866dc24b85ddce708e60d702 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Apr 21 14:42:11 2008 +0200 |
| |
| ppc4xx: Update APC405 board support |
| |
| - enable esd's auto_update mechanism |
| - fix LCD support on latest hardware revision (uses other LCD controller) |
| - support alternative flash layout on rev. 1.8 boards |
| - coding style cleanup |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 83975d02e225e231960784972e7820a8b303756b |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Apr 21 14:42:06 2008 +0200 |
| |
| ppc4xx: update esd's common auto_update code for 405 boards |
| |
| - Coding style cleanup (long lines) |
| - improve handling of protected flash regions |
| - remove dead code |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit b9233fe5d59cb25d975071616bd1035d6f4c2285 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Apr 21 14:41:59 2008 +0200 |
| |
| ppc4xx: Update esd's common LCD code for 405 boards |
| |
| - Coding style cleanup (long lines) |
| - Add s1d13505 support |
| - Make some functions return a result code instead of void |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit dea68189424c3f1242427a8146a3861bf093173c |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Apr 21 11:36:55 2008 +0200 |
| |
| ppc4xx: Update FPGA image for APC405 boards |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 2a05b152924acfcec3b037693329e517e6d3578f |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Apr 21 11:36:08 2008 +0200 |
| |
| ppc4xx: Update bootlogo for APC405 boards |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 8deafdc6ad368368cf03b58cab4bd39f45d64b5c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Apr 18 16:41:31 2008 +0200 |
| |
| ppc4xx: Add dcache_enable() for 440 |
| |
| dcache_enable() was missing for 440 and the patch |
| 017e9b7925f74878d0e9475388cca9bda5ef9482 ["allow ports to override bootelf |
| "] behavior uses this function. |
| |
| Note: Currently the cache handling functions like |
| d/icache_disable/enable() are NOP's on 440. This may be changed in the |
| future. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a49e0d177a0749614b316ec847fb623f09c82c07 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Apr 21 11:19:04 2008 +0200 |
| |
| video: Add missing free for logo memory |
| |
| This patch adds two missing free()s. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 84c01d3a05ae3aca5f7c0c13a31ca72ba1199a42 |
| Author: Troy Kisky <troy.kisky@boundarydevices.com> |
| Date: Mon Sep 24 16:41:43 2007 -0700 |
| |
| PATCH - Fix oob data copied into supplied buffer |
| |
| This patch correctly sets the oobavail variable |
| and fixes a bug where the oob data was not valid when |
| there where multiple groups in oobfree. |
| |
| First segment fixes a typo |
| Second segment fixes a bug where oob data may be copied incorrectly. |
| Third segment adds an error message when exiting due to write protect. |
| Forth segment fixes a bug where oobavail may be set incorrectly. |
| |
| Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
| |
| commit e1d09680f64b452adde89ed9fe28a77c56bedc9a |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Apr 18 17:24:32 2008 +0200 |
| |
| ppc4xx: Fix sys_get_info() for 405GP(r) |
| |
| This patch assigns the correct EBC clock for 405GP(r) CPUs |
| to PPC4xx_SYS_INFO structure. Without this patch U-Boot |
| uses an uninitialized EBC clock in its startup message. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit dc7746d86d2a3dfe01ab9a70cb427f92adc303c7 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Apr 20 15:39:38 2008 -0700 |
| |
| Makefile: remove nand_spl/System.map when cleaning up. |
| |
| commit d9a42c0ace4d4f9cb061d62a7265d1780f90447b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Apr 20 15:35:52 2008 -0700 |
| |
| MAKEALL: sort entries / lists. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 0878af169b181868a105b5c33f3a6423e2c9fd60 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Apr 18 11:29:01 2008 -0500 |
| |
| 85xx: Fix size of cpu-release-addr property |
| |
| The cpu-release-addr is defined as always being a 64-bit quanity regardless |
| if we are running on a 32-bit or 64-bit machine. |
| |
| commit 88353a985109562a639b2f8a0c90d77011bfe374 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Fri Apr 4 11:15:58 2008 -0500 |
| |
| Fix calculation of I2C clock for some 85xx chips |
| |
| Some 85xx chips use CCB as the base clock for the I2C. Some use CCB/2, and |
| some use CCB/3. There is no pattern that can be used to determine which |
| chips use which frequency, so the only way to determine is to look up the |
| actual SOC designation and use the right value for that SOC. |
| |
| Update immap_85xx.h to include the GUTS PORDEVSR2 register. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 1e01477aeaf409ddb97e2633aab9cf8c9c60612e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Apr 18 11:44:27 2008 -0700 |
| |
| Fix build breakage casued by commit c0559be371b2 |
| |
| Change env_get_char from a global function ptr to a function. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 268a804d7e2fa07b64211fd2f9a9615db4539f23 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Apr 18 10:53:41 2008 -0700 |
| |
| Coding Style cleanup, update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 92bad20ad74b70adf3839df9a0a47cce000ac3d7 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Apr 8 14:00:57 2008 -0400 |
| |
| Add support for u-boot in svn and localversion-* files |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit d23ff6827decf121461fbc5622612fd7effe207e |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Thu Apr 3 17:04:22 2008 +0200 |
| |
| MX31ADS network and flash updates |
| |
| This patch allows U-Boot to use buffered writes to the Spansion NOR |
| flash installed on this board, and eliminates long delays in network |
| transfers after the board startup. |
| |
| Also modify flash layout to embed main and redundant environment |
| blocks in the U-Boot image. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit b5dc9b304d289831f291843ff88a45cbdf1a6290 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Mon Apr 14 10:53:12 2008 +0200 |
| |
| Support for the MX31ADS evaluation board from Freescale |
| |
| This patch adds support for the MX31ADS evaluation board from Freescale, |
| initialization code is copied from RedBoot sources, also provided by |
| Freescale. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 499e7831e1baaac6bfb959213f1950c216fbc5ba |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Apr 8 10:33:29 2008 +0200 |
| |
| ppc4xx: Change Canyonlands to support booting from 2k page NAND devices |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5e182dce04d68cc94407a1b1fa09307f2bb96719 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Apr 8 10:33:28 2008 +0200 |
| |
| ppc4xx: Adjust Canyonlands fixed DDR2 setup (NAND booting) to 512MB SODIMM |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit fe7c0db6b2a9004f96c2a2d4fff2849e19c2d825 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Apr 8 10:33:27 2008 +0200 |
| |
| ppc4xx: Add Glacier NAND booting target |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 46f373838e384a4c23d13581b1dfa5acb66b5810 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Apr 8 10:31:00 2008 +0200 |
| |
| nand_spl: Update nand_spl to support 2k page size NAND devices |
| |
| This patch adds support for booting from 2k page sized NAND device |
| (e.g. Micron 29F2G08AAC). |
| |
| Tested on AMCC Canyonlands. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Thu Apr 17 18:18:00 2008 +0200 |
| |
| Fix crash on sequoia in ppc_4xx_eth_init |
| |
| Currently U-Boot crashes in ppc_4xx_eth_init on sequoia |
| with cache enabled (TLB Parity exeption). This patch |
| fixes the problem. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit accf7355767dc7f6b85d88bb1c75c9d95e84ba5b |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Thu Apr 17 18:15:27 2008 +0200 |
| |
| ppc4xx: Fix crash on sequoia with cache enabled |
| |
| Currently U-Boot crashes on sequoia board in CPU POST if |
| cache is enabled (CONFIG_4xx_DCACHE defined). The cache |
| won't be disabled by change_tlb before CPU POST because |
| there is an insufficient adress range check since |
| CFG_MEM_TOP_HIDE was introduced. This patch tries to fix |
| this problem. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 43c509254fab375c49936498da944658117ed07c |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Thu Apr 17 23:35:13 2008 +0900 |
| |
| Use jr as register jump instruction |
| |
| Current assembler codes are inconsistent in the way of register jump |
| instruction usage; some use jr, some use j. Of course GNU as allows both |
| usages, but as can be expected from `Jump Register' the mnemonic `jr' is |
| more intuitive than `j'. For example, Linux doesn't have `j <reg>' usage |
| at all. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 7ce63709828d37b08866e537339a169bd0db2bd3 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Tue Apr 15 14:15:30 2008 +0200 |
| |
| RTC driver for MC13783 |
| |
| MC13783 is a multifunction IS with an SPI interface to the host. This |
| driver handles the RTC controller in this chip. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 38254f45b0b412332726c90d3184ad47479fcffb |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Tue Apr 15 14:14:25 2008 +0200 |
| |
| New i.MX31 SPI driver |
| |
| This is an SPI driver for i.MX and MXC based SoCs from Freescale. So far |
| only implemented and tested on i.MX31, can with a modified register layout |
| and definitions be used for i.MX27, I think, MXC CPUs have similar SPI |
| controllers too. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 7064122c2eef92f02a03ef37a1a1c07e70cd4e38 |
| Author: Magnus Lilja <lilja.magnus@gmail.com> |
| Date: Tue Apr 15 19:09:10 2008 +0200 |
| |
| Fix name of i.MX31 boards in config file header |
| |
| Correct the name of the i.MX31 Litekit and phyCORE boards in config files. |
| |
| Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> |
| |
| commit a49864593e083a5d0779fb9ca98e5a0f2053183d |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sun Apr 13 19:42:19 2008 -0400 |
| |
| allow ports to override go behavior |
| |
| Split the arch-specific logic out of the common go code and into a dedicated |
| weak function called do_go_exec() that lives in cpu directories. This will |
| need review from i386/nios people to make sure I didn't break them. |
| |
| commit 017e9b7925f74878d0e9475388cca9bda5ef9482 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sun Apr 13 19:42:18 2008 -0400 |
| |
| allow ports to override bootelf behavior |
| |
| Change the bootelf setup function into a dedicated weak function called |
| do_bootelf_exec. This way ports can control the behavior however they |
| like before/after calling the ELF entry point. |
| |
| commit a4b46ed6b3502335c3f3a5d672abe0bcb44f20b7 |
| Author: Ulf Samuelsson <ulf@atmel.com> |
| Date: Sat Apr 12 20:56:03 2008 +0200 |
| |
| Reorder ARM boards in Makefile |
| |
| Rearrange ARM boards in Makefile so that ARM926EJ-S boards |
| are no longer under ARM92xT header. |
| |
| Signed-off-by: Ulf Samuelsson <ulf@atmel.com> |
| Ack-By Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit c3a60cb3bd67e120fc99b6ba88d9295c3c07f688 |
| Author: Ulf Samuelsson <ulf@atmel.com> |
| Date: Sat Apr 12 20:29:44 2008 +0200 |
| |
| Clean up dataflash partitioning |
| |
| This patch removes the board dependent parts from |
| "drivers/mtd/dataflash.c". |
| Each board relying on this, will have the appropriate |
| code in a new file, "partition.c" in the board directory. |
| board Makefiles updated to use the file. |
| |
| The dataflash partitions are aligned on sector/page boundaries. |
| |
| The CONFIG_NEW_DF_PARTITION was used to create named partitions |
| This is now the default operation, and the CONFIG variable is removed. |
| |
| Signed-off-by: Ulf Samuelsson <ulf@atmel.com> |
| |
| commit 51ecde946fec511a16346e498204ca10ad71080d |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Apr 12 14:08:45 2008 +0200 |
| |
| gitignore: udpate stgit generated and .patch file |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 66e39818e95f51ee1c1dd2094407a8929543fa6d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Apr 18 00:15:36 2008 -0700 |
| |
| Get rid of redundant copy of renamed header file. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit c3aafd8cf814e33a77de81c2f22b8c772216a3cc |
| Author: Vlad Lungu <vlad@comsys.ro> |
| Date: Fri Apr 11 21:20:14 2008 +0300 |
| |
| Fix dependency generation for older gcc versions |
| |
| With gcc 3.3.3 at least, compilation fails with |
| |
| Generating include/autoconf.mk |
| gcc: compilation of header file requested |
| make: *** [include/autoconf.mk] Error 1 |
| |
| since commit 16fe77752eee099b9fb61ed73460e51cc94b37ba. |
| |
| Signed-off-by: Vlad Lungu <vlad@comsys.ro> |
| |
| commit cb1c4896905ab22fcd982e6a8a539f0031942e71 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Fri Apr 11 11:07:49 2008 +0200 |
| |
| Restore the ability to continue booting after legacy image overwrite |
| |
| Before new uImage code was merged, bootm code allowed for the kernel image to |
| get overwritten during decompresion. new uImage introduced a check for image |
| overwrites and refused to boot the image that got overwritten. This patch |
| restores the old behavior. It also adds a warning when the image overwriten is |
| a multi-image file, because in such case accessing componentes other than the |
| first one will fail. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit de2b3216e6b4f3b2fe93759c05b17504f9dfe036 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Fri Apr 11 11:07:43 2008 +0200 |
| |
| ppc: Fix ftd_blob variable init when processing raw blob |
| |
| Set fdt_blob variable before its value is printed out. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 3d36be030043cd841a2551d00a395135e363a64b |
| Author: Jason Wessel <jason.wessel@windriver.com> |
| Date: Thu Apr 10 14:30:16 2008 -0500 |
| |
| Remove all the search paths from the .lds files. |
| |
| The cross compiler is responsible for providing the correct libraries |
| and the logic to find the linking libraries. |
| |
| Signed-off-by: Jason Wessel <jason.wessel@windriver.com> |
| |
| commit 7d721e34ae6be7d7db63e8d060a246278bb7ae58 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Mon Apr 14 15:44:16 2008 +0200 |
| |
| Boot-related documentation update |
| |
| - document 'bootm_low' and 'bootm_size' environment variables |
| - update inaccurate CFG_BOOTMAPSZ entry |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit a6f0bd9f2b1971e2a61ac0fd1fc2c96cb7a4b67a |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Wed Apr 9 17:34:08 2008 +0200 |
| |
| Fix regression introduced by a typo in "Tidied other cpu/arm920t/start.S code" |
| |
| Restore logic reverted by commit |
| |
| commit 80767a6cead9990d9e77e62be947843c2c72f469 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Wed Sep 5 16:04:41 2007 +0100 |
| |
| Changed API name to coloured_led.h |
| Removed code using deprecated ifdef CONFIG_BOOTBINFUNC |
| Tidied other cpu/arm920t/start.S code |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit e25cb8d3f4fcc265a9cdf8e9d577b59bdb64bbaf |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Apr 8 10:24:24 2008 -0400 |
| |
| Remove conflicting NAND ID |
| |
| There are two NAND entries with ID 0xDC and this obviously causes problems. |
| In the kernel, they punted the first entry, so we should do the same. |
| |
| See this upstream e-mail for more info: |
| http://lists.infradead.org/pipermail/linux-mtd/2007-July/018795.html |
| |
| Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 188e94c370621708d13547d58dbc6ed3c5602aa8 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Tue Apr 8 16:20:35 2008 +0900 |
| |
| cpu/mips/cpu.c: Fix flush_cache bug |
| |
| Cache operations have to take line address (addr), not start_addr. |
| I noticed this bug when debugging ping failure. |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit 8f2a68a07c058fca1d413e54f71c2e7e78a74ed4 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Thu Apr 3 14:29:01 2008 +0200 |
| |
| TQM5200: fix default IDE reset level |
| |
| Before the first call of ide_reset(), the level of the IDE reset |
| signal on the TQM5200 is low (reset asserted). This patch sets the |
| default value to high (reset not asserted). |
| |
| Currently this patch fixes no real problem, but it is cleaner to |
| assert the reset signal only on demand, and not permanently. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit c61e033d6e8abb7b4060ee36060961e1399f6079 |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Thu Apr 3 14:18:48 2008 +0200 |
| |
| mgcoge, mgsuv: realign CONFIG_EXTRA_ENV_SETTING |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit f308572e19eb7fe63aa3d41f214cde4c23c9800f |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Thu Apr 3 14:18:47 2008 +0200 |
| |
| mgcoge, mgsuv: rename 'addcon' to 'addcons' |
| |
| The latter name with 13 users is already established, so we will use |
| that. |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit e175eacc87c3a9e4dad0799fee0e95732520afc7 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Thu Apr 3 13:37:56 2008 +0200 |
| |
| IDE: fix bug in reset sequence |
| |
| According to the ata (ata5) specification the RESET- signal |
| shall be asserted for at least 25 us. Without this patch, |
| the RESET- signal is asserted on some boards for only < 1 us |
| (e. g. on the TQM5200). This patch adds a general delay of |
| 25 us to the RESET- signal. |
| |
| Without this patch a Platinum 4 GiB CF card is not recognised |
| properly on boards with a TQM5200 (STK52xx, TB5200). |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 813bea96a960916c72b4a3a7df840151529c26ce |
| Author: Sascha Laue <Sascha.Laue@gmx.biz> |
| Date: Thu Apr 3 14:43:11 2008 +0200 |
| |
| lwmon5: disable CONFIG_ZERO_BOOTDELAY |
| |
| Signed-off-by: Sascha Laue <sascha.laue@liebherr.com> |
| |
| commit 53eec6f1d25932e76d63ccb14082792b0b96bf41 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Apr 2 08:03:58 2008 +0200 |
| |
| ds174x: Fix warning on return in rtc_get and rtc_set functions |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit a253b38bf50c85227c33ca0febc870ee49d1588e |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Apr 2 08:03:57 2008 +0200 |
| |
| cmd_log.c: Fix assignment differ in signedness |
| |
| In function 'logbuff_init_ptrs': |
| cmd_log.c:79: warning: pointer targets in assignment differ in signedness |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 6c0e9a8f1cc090fbfbc6f86b6b4fd17a1628f3df |
| Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in> |
| Date: Wed Apr 2 11:04:43 2008 +0530 |
| |
| Remove duplicate #undef SHOW_INFO in drivers/usb/usb_ohci.c |
| |
| Signed-off-by: gururaja hebbar <gururajakr@sanyo.co.in> |
| |
| commit 478d5ec9ae3cbcc6040241d2d73dbbc61fe9b49d |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Apr 1 14:07:10 2008 +0200 |
| |
| s3c4510b_eth: fix 'packed' attribute ignored for fields of MACFrame |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit c08fb3ea36d19b1640b7906264581e9105534399 |
| Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| Date: Tue Apr 15 10:24:14 2008 +0200 |
| |
| Additional PCI IDs for IDE and network controllers |
| |
| These PCI IDs are required by the Linkstation platforms. |
| |
| Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| |
| commit c0559be371b2a64b1a817088c3308688e2182f93 |
| Author: Joakim Tjernlund <joakim.tjernlund@transmode.se> |
| Date: Mon Apr 14 23:01:50 2008 +0200 |
| |
| Change env_get_char from a global function ptr to a function. |
| |
| This avoids an early global data reference. |
| |
| Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| |
| commit 3e0f331c05d72f140715c1e9fca991927e44d422 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Tue Apr 29 12:35:08 2008 +0000 |
| |
| Clean up smsc911x driver |
| |
| Replace direct register address derefencing with accessor functions. |
| Restrict explicitly 32-bit bus-width, extend affected configurations |
| respectively. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit de1b686b763aa8b87a86f6748ce9169e7fc0e4cd |
| Author: Sascha Hauer <s.hauer@pengutronix.de> |
| Date: Tue Apr 15 00:08:20 2008 -0400 |
| |
| This patch adds a driver for the following smsc network controllers: |
| LAN9115 |
| LAN9116 |
| LAN9117 |
| LAN9215 |
| LAN9216 |
| LAN9217 |
| |
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
| Signed-off-by: Guennadi Liakhovetski<lg@denx.de> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 3dfd4aab929cccddb63d9ea509967861e1333b52 |
| Author: Sascha Laue <Sascha.Laue@gmx.biz> |
| Date: Tue Apr 1 15:13:03 2008 +0200 |
| |
| Fix watchdog POST for lwmon5 |
| |
| If the hardware watchdog detects a voltage error, the watchdog sets |
| GPIO62 to low. The watchdog POST has to detect this low level. |
| |
| Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i> |
| |
| commit 24b448448a917e52806f82660a5c9d47608894fb |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Apr 1 15:22:11 2008 +0800 |
| |
| ata: update the libata.h from ata.h of linux kernel |
| |
| Current libata.h of u-boot is out of sync from linux kernel, |
| this patch make it be consistent with linux kernel. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Tor Krill <tor@excito.com> |
| |
| commit f8f9dc98883f66f59eb0601da65808e6b139c87c |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Mar 31 11:59:27 2008 -0500 |
| |
| Allow use of ARCH=powerpc when building |
| |
| The linux kernel is now mostly ARCH=powerpc, so to make life easier |
| allow use to use ARCH=powerpc and convert it to ARCH=ppc. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 8af657d2c6d1ca4f2f76973531394d4578ba2ef0 |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Mon Mar 31 10:40:54 2008 +0900 |
| |
| Add apollon board MAINTAINERS entry |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit 77e475cc0ed1832160017d364be32a0be9ff02a9 |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Mon Mar 31 10:40:36 2008 +0900 |
| |
| Fix OneNAND read |
| |
| It should access with 16-bit instead of 8-bit |
| |
| Now it uses the generic memcpy with 8-bit access. It means it reads wrong data from OneNAND. |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit a9da2b41079d230db3a5641625311983f85ce1fb |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Mon Mar 31 10:40:19 2008 +0900 |
| |
| Fix OneNAND erase command |
| |
| It mis-calculates the block address. |
| Also fix DECLARE_GLOBAL_DATA_PTR in env_onenand. |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit 61525f2ffa156665a66908fda47dbf29d65ea579 |
| Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| Date: Mon Mar 31 01:32:15 2008 +0200 |
| |
| Support for LinkStation / KuroBox HD and HG PPC models |
| |
| This patch is based on the port by Mihai Georgian (see linkstation.c for |
| Copyright information) and implements support for LinkStation / KuroBox HD |
| and HG PPC models from Buffalo Technology, whereby HD is deactivated at |
| the moment, pending network driver fixing. |
| |
| Notice to users: this is pretty much a barebone port. Support for network |
| on HG models is already in the U-Boot mainline, but you might also want |
| patches to switch fan / phy modes depending on the negotiated ethernet |
| parameters. This patch also doesn't support console switching, booting EM |
| mode, Buffalo specific ext2 magic number. So, if you want to use any of |
| those, you need additional patches. Otherwise this patche provides a fully |
| functional u-boot with a network console on your system. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 0f3ba7e9783f352318f197a3148f6d5cc3d75bea |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Mar 30 01:22:13 2008 -0500 |
| |
| Add CONFIG_MII_INIT support to related boards |
| |
| Replace CONFIG_8xx and CONFIG_MCF532x to CONFIG_MII_INIT in |
| cmd_init.c. Add CONFIG_MII_INIT to board configuration files |
| that use mii_init() in cmd_init.c. |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Acked-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit f33fca22e76f20e4e4793810ca7a06a4805a6cf4 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Mar 30 01:19:06 2008 -0500 |
| |
| Update CONFIG_PCIAUTO_SKIP_HOST_BRIDGE to related boards |
| |
| Remove test for CONFIG_MPC5200 in drivers/pci/pci_auto.c and define |
| CONFIG_PCIAUTO_SKIP_HOST_BRIDGE in related board configuration files. |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit e99ccb488181d012248c6be30b2093e950319fc5 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Mar 27 11:46:38 2008 -0500 |
| |
| Introduce phys_size_t and move phys_addr_t into asm/types.h |
| |
| Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's |
| that have larger physical addresses like 44x, 85xx, and 86xx. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 20a14a42a25f72e379f38460b8a8484667536795 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Apr 2 16:19:07 2008 -0500 |
| |
| Rename include/md5.h to include/u-boot/md5.h |
| |
| Some systems have md5.h installed in /usr/include/. This isn't the |
| desired file (we want the one in include/md5.h). This will avoid the |
| conflict. This fixes the host tools building problem by creating a new |
| directory for U-Boot specific header files. |
| |
| [Patch by Andy Fleming, modified to use separate directory by Wolfgang |
| Denk] |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| Acked-by: Timur Tabi <timur@freescale.com> |
| |
| commit f297b7a1ec87433f66320d89d993e1bc738c66b8 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Mar 27 18:51:17 2008 +0800 |
| |
| drivers: code clean up |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 0ff7cba4a2e51c90827f6d21a0b28b4d67109597 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Mar 27 18:50:41 2008 +0800 |
| |
| drivers: clean up the ata_piix.h |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit e8f7ba404f1409606962815ecc955a06984b08b3 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Mar 27 18:49:56 2008 +0800 |
| |
| doc: english polishing for README.sata |
| |
| according to gvb's suggestion, polishing for the doc. |
| |
| Signed-off-by: Jerry Van Baren <gerald.vanbaren@ge.com> |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 3e3f766a5274d204780460e1879723b565296d34 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Mar 26 18:53:28 2008 -0500 |
| |
| Fix warnings introduced by I2C bus speed setting patch |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 3c735e7437150e8615f26930c7819db85634276d |
| Author: eran liberty <eran.liberty@gmail.com> |
| Date: Thu Mar 27 00:50:49 2008 +0100 |
| |
| Altera Stratix II support |
| |
| Adds Support for Altera's Stratix II. |
| |
| Within your board specific init file you will have to call |
| |
| 1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off); |
| 2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc); |
| |
| Altera_desc* contines (for example): |
| { |
| Altera_StratixII, /* part type */ |
| passive_serial, /* interface type */ |
| 1, /* bytes of data part can accept */ |
| (void *)(&funcs), /* interface function table */ |
| 0L, /* base interface address */ |
| 0 /* implementation specific cookie */ |
| } |
| |
| funcs is the interface. It is of type altera_board_specific_func. |
| It looks like this: |
| altera_board_specific_func func = { |
| pre_fn, |
| config_fn, |
| status_fn, |
| done_fn, |
| clk_fn, |
| data_fn, |
| abort_fn, |
| post_fn, |
| }; |
| |
| you will have to implement these functions, which is usually bit |
| banging some gpio. |
| |
| Signed-off-by: Eran Liberty <liberty@extricom.com> |
| |
| commit 5ece9ec9f6cd52950ab848e2fe422dacf1d3a335 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Apr 13 14:32:54 2008 -0700 |
| |
| Update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5ad862166aa24d62a69aa9c708f6b2f5c0d28fb7 |
| Author: Sascha Hauer <s.hauer@pengutronix.de> |
| Date: Wed Mar 26 20:41:17 2008 +0100 |
| |
| Phytec Phycore-i.MX31 support |
| |
| This patch adds support for the Phytec Phycore-i.MX31 board |
| |
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit caebc95be3b42e5147b5fac7672ac4b2693ef7e1 |
| Author: Sascha Hauer <s.hauer@pengutronix.de> |
| Date: Wed Mar 26 20:41:09 2008 +0100 |
| |
| mx31 litekit support |
| |
| This patch adds support for the mx31 litekit board |
| |
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit cdace0661208754a53019ea0dc7b803a040e0939 |
| Author: Sascha Hauer <s.hauer@pengutronix.de> |
| Date: Wed Mar 26 20:40:49 2008 +0100 |
| |
| add an i2c driver for mx31 |
| |
| This patch adds an i2c driver for Freescale i.MX processors |
| |
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 9b56f4f0306f3940b0aafd823ed6ecfc2d75d6c6 |
| Author: Sascha Hauer <s.hauer@pengutronix.de> |
| Date: Wed Mar 26 20:40:42 2008 +0100 |
| |
| core support for Freescale mx31 |
| |
| This patch adds the core support for Freescale mx31 |
| |
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 7ec68862a27c8f6f6d566228de8f6724d964a939 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Apr 13 14:19:23 2008 -0700 |
| |
| Fix compile error |
| |
| ...as suggested by Peter Pearse |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5252ed95204bdf55bec5a90ea69860bf2f78c643 |
| Author: Sascha Hauer <s.hauer@pengutronix.de> |
| Date: Wed Mar 26 20:40:36 2008 +0100 |
| |
| Separate omap24xx specific code from arm1136 |
| |
| Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 |
| to cpu/arm1136/omap24xx. |
| |
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 1f1d88dd40815332df32982e739f2ddd2da6fe1a |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Jan 29 18:21:05 2008 -0500 |
| |
| disable caches before booting an app for Blackfin apps |
| |
| It isn't generally save to execute applications outside of U-Boot with caches |
| enabled due to the way the Blackfin processor handles caches (requires |
| software assistance). This patch disables caches before booting an ELF or |
| just booting raw code. The previous discussion on the patch was that we |
| wanted to use weaks instead, but that proved to not be feasible when multiple |
| symbols are involved, which puts us back at the ifdef solution. I've |
| minimized the ugliness by moving the setup step outside of the main function. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit e6dfed705efa44ebf00d21bb1588c6ccc8f3ad32 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Apr 13 10:03:54 2008 -0700 |
| |
| ppc: Get rid of unused machine type definitions |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 1aeed8d71acb3290cf2446f316d6ba437e7881c4 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Apr 13 09:59:26 2008 -0700 |
| |
| Coding Style cleanup; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 7754f33c6fb7a2c050388d20bf3847038558bdcf |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Thu Feb 21 13:58:11 2008 -0500 |
| |
| LM73 bug fix for negative temperatures and cleanup |
| |
| When the LM73 temperature sensor measures a temperature below 0 C, the |
| current driver does not perform sign extension, so the result returned is |
| 512 C too high. This patch fixes the problem, and does general cleanup |
| of the code. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 96ef831f713289afba19da0c8f905e99da2b23e0 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Thu Apr 3 13:36:02 2008 +0200 |
| |
| cfi_flash: Support buffered writes on non-standard Spansion NOR flash |
| |
| Some NOR flash chip from Spansion, for example, the s29ws-n MirrorBit |
| series require different addresses for buffered write commands. Define a |
| configuration option to support buffered writes on those chips. A more |
| elegant solution would be to automatically detect those chips by parsing |
| their CFI records, but that would require introduction of a fixup table |
| into the cfi_flash driver. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 3f9c542d3d69b1a10a5e193e779133a0454d1f44 |
| Author: Lee Nipper <lee.nipper@freescale.com> |
| Date: Thu Apr 10 09:35:06 2008 -0500 |
| |
| mpc83xx: Update DIMM data bus width test to support 40-bit width |
| |
| 32-bit wide ECC memory modules report 40-bit width. |
| Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'. |
| |
| Signed-off-by: Lee Nipper <lee.nipper@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 5fb5a689d822ca61e814bd523fc930af335242fa |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Mon Mar 31 17:05:12 2008 +0800 |
| |
| mpc83xx: Fix the bug of serdes initialization |
| |
| Currently the serdes will not be initializated due to the |
| partid's error. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 2000784818f043db7ca60e2846a72d097766b894 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Apr 3 16:28:29 2008 +0800 |
| |
| mpc83xx: Fix the SATA clock setting of 837x targets |
| |
| Currently the SATA controller clock is configured as CSB clock, |
| usually the CSB clock is 400/333/266MHz. |
| |
| However, The SATA IP block is only guaranteed to operate up to |
| 200 MHz as stated in the HW spec. |
| |
| The bug is reported by Joe D'Abbraccio <ljd015@freescale.com> |
| |
| This patch makes the SATA clock as half of CSB clock. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 1ac4f320bf0b593aa0a741f2d649a8ece8838672 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Apr 2 13:41:21 2008 +0200 |
| |
| mpc837xerdb: Fix warning: implicit declaration of function 'fdt_fixup_dr_usb' |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 97b3ecb575a92fa34c1765229dbc06f2b662f139 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Apr 9 04:20:57 2008 -0500 |
| |
| 85xx: Fix detection of MP cpu spin up |
| |
| We were looking at the wrong memory offset to determine of a secondary |
| cpu had been spun up or not. Also added a warning message if the |
| all the secondary cpus we expect don't spin up. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f3e04bdc3f360c66801a9048956e61e41a16edba |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Apr 8 10:45:50 2008 -0500 |
| |
| 85xx: Use SVR_SOC_VER instead of SVR_VER |
| |
| The recent change introduced by 'Update SVR numbers to expand support' |
| now requires that we use SVR_SOC_VER instead of SVR_VER if we want |
| to compare against a particular processor id. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 5b2052e5f5fcce5dbd4d2750a29c0e45bce806e7 |
| Author: Eugene O'Brien <eugene.obrien@advantechamt.com> |
| Date: Fri Apr 11 10:00:35 2008 -0400 |
| |
| ppc4xx: Fix power mgt definitions for PPC440 |
| |
| Corrected DCR addresses of PPC440EP power management registers. |
| |
| Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com> |
| |
| commit 950a392464e616b4590bc4501be46e2d7d162dea |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Apr 11 15:11:26 2008 +0200 |
| |
| Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18: |
| |
| Reverting became necessary after it turned out that the patches in |
| the u-boot-arm repo were modified, and in some cases corrupted. |
| |
| This reverts the following commits: |
| |
| 066bebd6353e33af3adefc3404560871699e9961 |
| 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6 |
| c88ae20580b2b01487b4cdcc8b2a113f551aee36 |
| a147e56f03871bba4f05058d5e04ce7deb010b04 |
| d6674e0e2a6a1f033945f78838566210d3f28c95 |
| 8c8463cce44d849e37744749b32d38e1dfb12e50 |
| c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d |
| 8bf69d81782619187933a605f1a95ee1d069478d |
| 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d |
| a574a73852a527779234e73e17e7597fd8128882 |
| 1377b5583a48021d983e1fd565f7d40c89e84d63 |
| 1704dc20917b4f71e373e2c888497ee666d40380 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 64e541f4c1b413dd84c7e409f5c2bf328db2ac13 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Apr 11 07:02:29 2008 +0200 |
| |
| ppc4xx: Update Kilauea defconfig to use device-tree booting as default |
| |
| This patch reworks the default environment on Kilauea/Haleakala. Now |
| "net_nfs" for exmaple uses the device-tree style booting formerly know |
| as "net_nfs_fdt". Also the addresses in RAM were changed because of the |
| new image booting support, which check for image overwriting. So the |
| addresses needed togeet adjusted. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 756f5dacda3810b094b94bcceffd3ce6c7ff9a28 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Apr 9 11:58:02 2008 +0200 |
| |
| ppc4xx: Fix Canyonlands default environment to work with new image support |
| |
| Since the new image support checks for image overwriting, the default |
| environment needs to get adjusted to use correct addresses. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit dfc6c7b647dba7ab86749616f0e9e5740deed422 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Apr 9 11:54:11 2008 +0200 |
| |
| ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE |
| |
| The patch 70431e8a7393b6b793f77957f95b999fc9a269b8 (Make MPC83xx one step |
| closer to full relocation.) doesn't use CFG_MONITOR_BASE anymore. But |
| on 4xx systems _start currently cannot be used for this calculation. |
| So revert back to the original version for now. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f91374f65eae8b42cac329e06ba1c54728278efb |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 12:49:52 2008 +0100 |
| |
| microblaze: Sort microblaze boards in MAKEALL script |
| |
| commit 62032deb7214c6d9b4396297e2aaa559bc2f8495 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 11:58:45 2008 +0100 |
| |
| microblaze: clean microblaze_config.mk |
| |
| FLAGS are generated by U-BOOT generator. |
| Board specific FLAGS are in board directory |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit cf5c679ca04a6b54bf53a55b8b9c29335b387287 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 12:47:19 2008 +0100 |
| |
| microblaze: xupv2p fix config file for supporting FDT |
| |
| commit 188dc16b189143573b1ed90e584bf866d75cdd12 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 11:53:02 2008 +0100 |
| |
| microblaze: ml401 fix config file for supporting FDT |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit 4c6a6f02e239236261333759997eeaf86b30b54c |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 11:22:48 2008 +0100 |
| |
| microblaze: ml401 - add ifdef for GPIO |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit af7ae1a411c67ee9d17a66d17ce50b374f3dd4e7 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 12:13:03 2008 +0100 |
| |
| microblaze: clean uart16550 and uartlite handling |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit 0b20f250877441460fb79d72192954abe8498834 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 11:08:31 2008 +0100 |
| |
| microblaze: Add Emaclite driver to Makefile |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit 868cde5310f88234b774878e4f06e79df10a88b3 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 11:08:01 2008 +0100 |
| |
| microblaze: Add Emac driver to Makefile |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit 6f961b4f461f6cbb83a467d468a02e6078c2b327 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 12:42:29 2008 +0100 |
| |
| microblaze: add Emac ethernet driver |
| |
| commit 89c53891b18cbafd29ab8931b40e27ad231b6085 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 12:41:56 2008 +0100 |
| |
| microblaze: add Emaclite ethernet driver |
| |
| commit e5845e21224dbe2fe47b11f1cdf95de7f84be7cb |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 11:04:01 2008 +0100 |
| |
| microblaze: ML401 and XUPV2P remove emac and emaclite reference |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit 6bf3e982aefdb1daf9f5462d482c8f9d1cc90a57 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 10:59:32 2008 +0100 |
| |
| microblaze: remove old setting for emac driver |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit cd2b75efb9cc037c74ecee9b3586f9bf9e1d4e57 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 28 10:58:15 2008 +0100 |
| |
| microblaze: Clean Makefile from ancient emac driver |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit ab68f921d9c741830f721c3d879c13a0c5597183 |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Fri Mar 28 10:20:43 2008 +0100 |
| |
| SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See www.gaisler.com for information. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit 6ed8a43a19bb0275501bc286007daafa923552cf |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Wed Mar 26 23:38:48 2008 +0100 |
| |
| SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit 6940383d9ec1bfe2f13e339e6f723e8d34af2b12 |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Wed Mar 26 23:34:47 2008 +0100 |
| |
| SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See www.gaisler.com for information. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit 823edd8a66ed50af5aaba0c79567f67061e4d79a |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Fri Mar 28 10:06:52 2008 +0100 |
| |
| SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See www.gaisler.com for information. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit 71d7e4c0489e5ed8fc69382236aaa2a1e510c135 |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Wed Mar 26 23:26:48 2008 +0100 |
| |
| SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template design. See www.gaisler.com for board information. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit b330990c2f36ee4a8bb318360e1c8ba965269ab6 |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Fri Mar 28 10:00:33 2008 +0100 |
| |
| SPARC: Added support for SPARC LEON2 SOC Processor. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit 2a2fa797e63b1e3cd4d570318ca5fbf8723ef53a |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Wed Mar 26 23:00:38 2008 +0100 |
| |
| SPARC/LEON3: Added AMBA Bus Plug&Play information print command (ambapp). It can print available cores (type: AHB Master, AHB Slave, APB Slave), their address ranges, IRQ number and version. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit 1e9a164e22976933002c5e4b0b79b09fcede9cd4 |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Wed Mar 26 22:51:29 2008 +0100 |
| |
| SPARC: Added support for SPARC LEON3 SOC processor. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit bf3d8b31169546fcddb4737391e1893fb12d033a |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Fri Mar 28 08:29:26 2008 +0100 |
| |
| SPARC: added SPARC support for new uimage in common code. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit 00ab32c85405a4fe65fd4128243086210fc90a21 |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Wed Mar 26 22:36:03 2008 +0100 |
| |
| SPARC: added SPARC board information to the command bdinfo. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit c2f02da21a3f37f0878554eebc785e04fdc4e128 |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Fri Mar 28 09:47:00 2008 +0100 |
| |
| SPARC: Added generic support for SPARC architecture. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit e54ec0f016803e4d9524ff71f7971bda0c51b287 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Apr 3 14:50:34 2008 +0200 |
| |
| ppc4xx: Fix 4xx enet driver to support 460GT EMAC2+3 |
| |
| This patch fixes a problem with the RGMII setup of the 460GT. The 460GT |
| has 2 RGMII instances and we need to configure the 2nd RGMII instance |
| for the EMAC2+3 channels. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c2a545ce33b26d80337f80b533828839249fb1c9 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Apr 2 08:03:56 2008 +0200 |
| |
| MPC8xx: Fix libfdt support introduced in commit 77ff7b74 |
| |
| fdt.c: In function 'ft_cpu_setup': |
| fdt.c:33: warning: implicit declaration of function 'do_fixup_by_prop_u32' |
| fdt.c:39: warning: implicit declaration of function 'do_fixup_by_compat_u32' |
| fdt.c:43: warning: implicit declaration of function 'fdt_fixup_ethernet' |
| fdt.c:45: warning: implicit declaration of function 'fdt_fixup_memory' |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 4abd844d8eb108736e1cf8fbf3dbf61f2d5fc11b |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Mar 31 20:45:56 2008 -0500 |
| |
| Fix fdt set command to conform to dts spec |
| |
| The fdt set command was treating properties specified as <00> and <0011> |
| as byte streams, rather than as an array of cells. As we already have |
| syntax for expressing the desire for a stream of bytes ([ xx xx ...]), |
| we should use the <> syntax to describe arrays of cells, which are always |
| 32-bits per element. If we imagine this likely (IMHO) scenario: |
| |
| > fdt set /ethernet-phy@1 reg <1> |
| |
| With the old code, this would create a bad fdt, since the reg cell would be |
| made to be one byte in length. But the cell must be 4 bytes, so this would |
| break mysteriously. |
| |
| Also, the dts spec calls for constants inside the angle brackets (<>) |
| to conform to C constant standards as they pertain to base. |
| Take this scenario: |
| |
| > fdt set /ethernet@f00 reg <0xe250000\ 0x1000> |
| |
| The old fdt command would complain that it couldn't parse that. Or, if you |
| wanted to specify that a certain clock ran at 33 MHz, you'd be required to |
| do this: |
| |
| > fdt set /mydev clock <1f78a40> |
| |
| Whereas the new code will accept decimal numbers. |
| |
| While I was in there, I extended the fdt command parser to handle property |
| strings which are split across multiple arguments: |
| |
| > fdt set /ethernet@f00 interrupts < 33 2 34 2 36 2 > |
| > fdt p /ethernet@f00 |
| ethernet@f00 { |
| interrupts = <0x21 0x2 0x22 0x2 0x24 0x2>; |
| }; |
| |
| Lastly, the fdt print code was rearranged slightly to print arrays of cells |
| if the length of the property is a multiple of 4 bytes, and to not print |
| leading zeros. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 1c2926abdd7db89296a8cc7f224dd9d5d4e37a56 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Apr 2 08:39:33 2008 +0200 |
| |
| ppc4xx: Canyonlands: Init SATA/PCIe port correctly |
| |
| Canyonlands (460EX) shares the first PCIe interface with the SoC SATA |
| interface. This usage can be configured with the jumper J6. This patch |
| correctly configures the SATA/PCIe PHY for SATA usage when this jumper |
| is installed. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6fe2946f198481254a6ee9600d7456b8316a4083 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Mar 28 17:37:49 2008 -0500 |
| |
| remove remaining CONFIG_OF_HAS_{UBOOT_ENV,BD_T} code |
| |
| finish off what commit 43ddd9c820fec44816188f53346b464e20b3142d, |
| "Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T" |
| started. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit b5873f1732b92a25690e1513b90dfb0d644f6697 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Apr 1 07:30:51 2008 +0200 |
| |
| dataflash: Move CONFIG_HAS_DATAFLASH to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 2d934ea51f276522b532f870a820e844ff480b5b |
| Author: Tor Krill <tor@excito.com> |
| Date: Fri Mar 28 15:29:45 2008 +0100 |
| |
| Add Vitesse 8601 support to TSEC driver |
| |
| Add phy_info for Vitesse VSC8601. |
| Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation. |
| |
| Signed-off-by: Tor Krill <tor@excito.com> |
| Reviewed-by: Kim Phillips <kim.phillips@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 3eac6402a508b0f68a21cc9cbc2cc49347de0c31 |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Mon Mar 31 14:25:00 2008 +0000 |
| |
| SPARC: added SMC91111 driver in and out macros for LEON processors. |
| |
| This patch makes SPARC/LEON processors able to read and write |
| to the SMC91111 chip using the chip external I/O bus of the memory |
| controller. This patchs defines the standard in and out macros |
| expected by the SMC9111 driver. |
| |
| To access that I/O bus one must set up the memory controller |
| (MCTRL or FTMCTRL) correctly. It is assumed that the user sets |
| up this correctly when the other MCTRL parameters are set up. It |
| can be set up from the board configuration header file. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 3ca7c558eba36332556bc470d45e2f5d42bd0ca6 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Wed Mar 26 18:52:34 2008 +0100 |
| |
| Add maintainership information for AT91CAP9ADK and AT91SAM9260EK boards |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 4e03dde84dd2c91e327cdc23ae119d432559a7a3 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Mar 31 21:31:04 2008 +0200 |
| |
| AT91SAM9260EK: Move CONFIG_CMD_NAND to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 0176d43e759a6e00cacc85eff26fd60f74b4f6b7 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Wed Mar 26 18:52:33 2008 +0100 |
| |
| Add support for AT91SAM9260EK |
| |
| Support for booting from internal DataFlash, external DataFlash card |
| or NAND flash is available. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 1762f13b4aab88b685b1722f17dada247945624b |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Mar 31 21:20:49 2008 +0200 |
| |
| AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 761712188b353494defb2b644491ff73d0daaa6f |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Mar 31 21:12:17 2008 +0200 |
| |
| AT91CAP9ADK: Move CONFIG_CMD_NAND to Makefile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 983c1db04c1dd0f92e02f06d29f0c65a3d9a2687 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Wed Mar 26 20:52:32 2008 +0100 |
| |
| Port AT91CAP9 to the new headers |
| |
| Adapt the existing AT91CAP9 code to the new headers and APIs. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 177e8a5ac81bbc531a1d54abdb47f2860266c3aa |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Wed Mar 26 19:52:31 2008 +0100 |
| |
| Finish header files reworking |
| |
| Replace AT91CAP9.h file with several splitted header files coming |
| from the Linux kernel. |
| |
| This is part 2 of the replacement: more header imports and edits. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 6d1dbbbf9fdf727384002e553e615c15d8b967f4 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Wed Mar 26 19:52:30 2008 +0100 |
| |
| Import several header files from Linux |
| |
| Replace AT91CAP9.h file with several splitted header files coming |
| from the Linux kernel. |
| |
| This is part 1 of the replacement: pristine header files import. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit a8a78f2d99dc1bd30dc3595da118539b506c6118 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Wed Mar 26 20:52:28 2008 +0100 |
| |
| Move at91cap9 specific files to at91sam9 directory |
| |
| AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a |
| common infrastructure can be used. Let this infrastructure be |
| named after the AT91SAM9 family, and move the existing AT91CAP9 |
| files to the new place. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 61106a565870ff503f92b251b94bd7afef889a04 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Wed Mar 26 21:52:27 2008 +0100 |
| |
| Use timer_init() instead of board supplied interrupt_init() |
| |
| The timer on AT91CAP9/AT91SAM9 is supplied by the SoC, and not by |
| the board, so use timer_init() instead of interrupt_init(). |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 5604e2178c5218fbfdba2e4293ca7652e829ac25 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Wed Mar 26 21:52:36 2008 +0100 |
| |
| Cleanup DataFlash partition handling |
| |
| DataFlash partition information has become a mess. This patch |
| defines a single partition scheme for Atmel DataFlashes. This partition |
| scheme will be used by all AT91CAP9 and AT91SAM9 boards. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 9b46432fc65ce0f0826b32e4f15c15b33ccb8d42 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Fri Mar 28 08:47:45 2008 -0500 |
| |
| ColdFire: Fix alignment issue after CONFIG_IDENT_STRING in start.S |
| |
| When the version_string function in start.S is not 4-byte align, |
| it will cause the compiler generates "unaligned opcodes detected |
| in executable segment". This issue affects all ColdFire CPUs. |
| By adding .align 4 after CONFIG_IDENT_STRING, it will pad 0's if |
| it is not aligned. |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Acked-by: John Rigby <jrigby@freescale.com> |
| |
| commit bae61eefe15b4d454060a7140e49ae58322be803 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Mar 25 15:41:15 2008 -0500 |
| |
| ColdFire: Add dspi and serial flash support for MCF5445x |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Acked-by: John Rigby <jrigby@freescale.com> |
| |
| commit 48ead7a7a922fceaf494e352abfab8216a41b417 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Mar 18 17:37:01 2008 -0500 |
| |
| ColdFire: Remove R5200 board |
| |
| This board never went into production |
| |
| Signed-off-by: Zachary P. Landau <zachary.landau@labxtechnologies.com> |
| Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Acked-by: John Rigby <jrigby@freescale.com> |
| |
| commit 545c8e0a7cd3ca9d3846668f69b0d201250abea8 |
| Author: Matthew Fettke <[matthew.fettke@gmail.com]> |
| Date: Thu Jan 24 14:02:32 2008 -0600 |
| |
| ColdFire: Added M5275EVB support. |
| |
| Signed-off-by: Matthew Fettke <mfettke@videon-central.com> |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Acked-by: John Rigby <jrigby@freescale.com> |
| |
| commit f71d9d91a2cd9c30b2b6369f15c1a46c11537c2b |
| Author: Matthew Fettke <[matthew.fettke@gmail.com]> |
| Date: Mon Feb 4 15:38:20 2008 -0600 |
| |
| ColdFire: Added MCF5275 cpu support. |
| |
| Signed-off-by: Matthew Fettke <mfettke@videon-central.com> |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Acked-by: John Rigby <jrigby@freescale.com> |
| |
| commit 44e5b9edab077aba6e9b849afa4b7fbd8fd7b02b |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Mar 17 12:14:11 2008 -0500 |
| |
| ColdFire: Define bootdelay in configuration file for M52277EVB |
| |
| Signed-off-by: Matt Wadel <Matt.Waddel@freescale.com> |
| Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Acked-by: John Rigby <jrigby@freescale.com> |
| |
| commit 77878f16cedee17161ff2336990970fffc6cea35 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Mar 17 12:09:07 2008 -0500 |
| |
| ColdFire: Fix second memory Chipselect for M5475EVB |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Acked-by: John Rigby <jrigby@freescale.com> |
| |
| commit 43d60642395a550956cb21d287c8cfa563913d28 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Mar 13 14:26:32 2008 -0500 |
| |
| ColdFire: Update correct FLASHBAR and RAMBAR1 for MCF5282 |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Acked-by: John Rigby <jrigby@freescale.com> |
| |
| commit eb14ebe813a0cb5d47905228da446a5ad692473b |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Sun Mar 30 20:33:04 2008 -0500 |
| |
| ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setup |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 02e3892021112f21067d9ed1d04ae4182725ba52 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Mar 31 12:20:48 2008 +0200 |
| |
| ppc4xx: Small whitespace fix of esd patches |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 034394abb524785047c815f00dde8cdbdc1593c5 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Sun Mar 30 18:52:44 2008 +0200 |
| |
| ppc4xx: Cleanup PMC440 board support |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit a6cc6c37188d85c25d167a4515da86f48d9a583e |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Sun Mar 30 18:52:06 2008 +0200 |
| |
| ppc4xx: Add ptm configuration variables for PMC440 |
| |
| Add support for the ptm1la, ptm1ms, ptm2la and ptm2ms |
| environment variables. |
| |
| Cleanup pci_target_init. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 7c91f51a2fe296909147f1646a1412729dd10b1d |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Sun Mar 30 18:01:15 2008 +0200 |
| |
| ppc4xx: Minor updates for DU440 boards |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit d5bffeb868d6b4d462f558dac43011027b6644b7 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Feb 19 00:54:20 2008 -0500 |
| |
| Blackfin: cleanup and overhaul common board init functions |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit b86b3416f874358acaf07519e7620cdb2145f75b |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Feb 19 00:50:58 2008 -0500 |
| |
| Blackfin: cleanup lib_blackfin/cache.c |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 9171fc81722c20fdb5a829a58b17c9eaadd5fb44 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sun Mar 30 15:46:13 2008 -0400 |
| |
| Blackfin: unify cpu and boot modes |
| |
| All of the duplicated code for Blackfin processors and boot modes have been |
| unified. After all, the core is the same for all processors, just the |
| peripheral set differs (which gets handled in the drivers). |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 880cc4381ea8360248cddcdf87a64566745a5724 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Wed Mar 26 22:52:35 2008 +0100 |
| |
| Fix CFG_NO_FLASH compilation. |
| |
| Many Atmel boards have no "real" (NOR) flash on board, and rely only |
| on DataFlash and NAND memories. This patch enables CFG_NO_FLASH to |
| be present in a board configuration file, while still enabling flash |
| commands like 'flinfo', 'protect', etc. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 9ce7e53abd039decea1af67aec81bbd5df7a2593 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Feb 19 00:58:13 2008 -0500 |
| |
| Blackfin: BF537-stamp: cleanup spi flash driver |
| |
| This punts the old spi flash driver for a new/generalized one until the |
| common one can be integrated. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit bb8e3cf25bc0b04936c0c1a075985dd8700a244b |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sun Mar 30 11:34:34 2008 -0400 |
| |
| Fix macro typo in common/cmd_mii.c |
| |
| This typo was introduced in commit 233a8bcd94997f3f345833a3b82e836222f2a206. I |
| actually applied the wrong patch. |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit f1b985f2d724ccaa4d3def07917f0caaf18fa77d |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Mar 30 16:39:53 2008 +0200 |
| |
| use correct at91rm9200 register name in m501sk board |
| |
| This fixes a naming bug for at91rm9200 lowlevel init code: |
| NOR boot flash is on chipselect 0, not chipselect 2. This |
| makes code use the register name from chip datasheets. |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 480ed1dea103a1c8f4591afc77d2de3c7868d983 |
| Author: David Brownell <david-b@pacbell.net> |
| Date: Fri Jan 18 12:55:00 2008 -0800 |
| |
| use correct at91rm9200 register name |
| |
| This fixes a naming bug for at91rm9200 lowlevel init code: |
| NOR boot flash is on chipselect 0, not chipselect 2. This |
| makes code use the register name from chip datasheets. |
| |
| Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> |
| |
| commit a3543d6dc52b0ba9c64016687cf32d600b31a476 |
| Author: David Brownell <david-b@pacbell.net> |
| Date: Fri Jan 18 12:45:45 2008 -0800 |
| |
| add missing ARM boards to MAKEALL |
| |
| Add some missing ARM boards to MAKEALL. These build correctly, |
| unlike several of the boards already listed. |
| |
| Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> |
| |
| commit 066bebd6353e33af3adefc3404560871699e9961 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Sun Mar 30 11:34:09 2008 +0100 |
| |
| Bracket READ_TIMER macro in cpu/arm1136/omap24xx/interrupts.c |
| to prevent compilation error. |
| |
| Signed-off-by: Peter Pearse <peter.pearse@arm.com> |
| |
| commit 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6 |
| Author: Guennadi Liakhovetski <[lg@denx.de]> |
| Date: Sun Mar 30 11:32:30 2008 +0100 |
| |
| Support for the MX31ADS evaluation board from Freescale |
| |
| This patch adds support for the MX31ADS evaluation board from Freescale, |
| initialization code is copied from RedBoot sources, also provided by Freescale. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit c88ae20580b2b01487b4cdcc8b2a113f551aee36 |
| Author: Sascha Hauer <s.hauer@pengutronix.de> |
| Date: Sun Mar 30 11:32:27 2008 +0100 |
| |
| Phytec Phycore-i.MX31 support |
| |
| This patch adds support for the Phytec Phycore-i.MX31 board |
| |
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit a147e56f03871bba4f05058d5e04ce7deb010b04 |
| Author: Sascha Hauer <s.hauer@pengutronix.de> |
| Date: Sun Mar 30 11:32:24 2008 +0100 |
| |
| mx31 litekit support |
| |
| This patch adds support for the mx31 litekit board |
| |
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit d6674e0e2a6a1f033945f78838566210d3f28c95 |
| Author: Sascha Hauer <s.hauer@pengutronix.de> |
| Date: Sun Mar 30 11:32:21 2008 +0100 |
| |
| add SMSC LAN9x1x Network driver |
| |
| This patch adds a driver for the following smsc network controllers: |
| LAN9115 |
| LAN9116 |
| LAN9117 |
| LAN9215 |
| LAN9216 |
| LAN9217 |
| |
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 8c8463cce44d849e37744749b32d38e1dfb12e50 |
| Author: Sascha Hauer <s.hauer@pengutronix.de> |
| Date: Sun Mar 30 11:32:16 2008 +0100 |
| |
| add an i2c driver for mx31 |
| |
| This patch adds an i2c driver for Freescale i.MX processors |
| |
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d |
| Author: Sascha Hauer <s.hauer@pengutronix.de> |
| Date: Sun Mar 30 11:30:43 2008 +0100 |
| |
| core support for Freescale mx31 |
| |
| This patch adds the core support for Freescale mx31 |
| |
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 8bf69d81782619187933a605f1a95ee1d069478d |
| Author: Sascha Hauer <s.hauer@pengutronix.de> |
| Date: Sun Mar 30 11:28:46 2008 +0100 |
| |
| Separate omap24xx specific code from arm1136 |
| |
| Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx. |
| |
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Sun Mar 30 11:23:05 2008 +0100 |
| |
| Add pmdra into MAKEALL |
| |
| Signed-off-by: Peter Pearse <peter.pearse@arm.com> |
| |
| commit a574a73852a527779234e73e17e7597fd8128882 |
| Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]> |
| Date: Sun Mar 30 11:21:58 2008 +0100 |
| |
| Adds support for the Prodrive PMDRA board, based on a DM6441 |
| |
| Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl> |
| |
| commit 1377b5583a48021d983e1fd565f7d40c89e84d63 |
| Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]> |
| Date: Sun Mar 30 11:11:34 2008 +0100 |
| |
| Removes all board specific code from the arch. part for DM644x (DaVinci) boards |
| |
| Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl> |
| |
| commit 1704dc20917b4f71e373e2c888497ee666d40380 |
| Author: Dirk Behme <dirk.behme@gmail.com> |
| Date: Sun Mar 30 11:09:01 2008 +0100 |
| |
| - Remove *_masked() functions as noted by Wolfgang |
| - Adapt register naming to recent TI spec (sprue26, March 2007) |
| - Fix reset_timer() handling |
| - As reported by Pieter [1] the overflow fix introduced a |
| delay of factor 16 (e.g 2 seconds became 32). While the |
| overflow fix is basically okay, it missed to divide udelay by |
| 16, too. Fix this. |
| [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179 |
| - Remove software division of timer count value (DIV(x) |
| macro) and do it in hardware (TIM_CLK_DIV). |
| Many thanks to Troy Kisky <troy.kisky@boundarydevices.com> |
| and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for |
| the hints & testing! |
| |
| Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| |
| Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> |
| |
| commit ac3315c26e143c31680750c9c13f027efbcc887e |
| Author: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Date: Thu Mar 6 16:45:44 2008 +0100 |
| |
| new PHY @ e1000 - 2nd try |
| |
| Add 82541ER device with latest integrated IGP2 PHY. |
| Introduced CONFIG_E1000_FALLBACK_MAC for NIC bring-up with empty eeprom. |
| |
| Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit c2b7da552293b50c9c9e46ed71267b02c2de9ea8 |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Fri Mar 28 20:22:53 2008 +0100 |
| |
| SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver. |
| |
| GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without |
| a debug link (EDCL). The GRETH core is documented in GRIP.pdf |
| available at www.gaisler.com. |
| |
| If the GRETH has GigaBit support (GBIT, Scatter gather, checksum |
| offloading etc.) can be determined by a bit in the control register. |
| The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 233a8bcd94997f3f345833a3b82e836222f2a206 |
| Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Mar 17 17:08:22 2008 -0500 |
| |
| Add CONFIG_MII_INIT in cmd_mii.c |
| |
| Provide common configuration in do_mii() to execute mii_init() |
| for all cpu architectures |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit f605479de2deb11e834f31dfdb0af107c86aced6 |
| Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Mar 17 17:08:16 2008 -0500 |
| |
| ColdFire: Fix FEC transmit issue for MCF5275 |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit d9a2f416d6ac6058cd7845033ae4dc32ef1c0746 |
| Author: Aras Vaichas <arasv@magtech.com.au> |
| Date: Wed Mar 26 09:43:57 2008 +1100 |
| |
| DHCP request fix for Windows Server 2003 |
| |
| Added option CONFIG_BOOTP_DHCP_REQUEST_DELAY. This provides an optional |
| delay before sending "DHCP Request" in net/bootp.c. Required to overcome |
| interoperability problems with Windows Server 200x DHCP server when U-Boot |
| client responds too fast for server to handle. |
| |
| Signed-off-by: Aras Vaichas <arasv@magtech.com.au> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 97bf85d784fbed485e652eb907589ad0d5cb7262 |
| Author: Daniel Hellstrom <daniel@gaisler.com> |
| Date: Fri Mar 28 20:40:19 2008 +0100 |
| |
| MTD/CFI: flash_read64 is defined a weak function (for SPARC) |
| |
| SPARC has implemented __raw_readq, it reads 64-bit from any 32-bit address. |
| SPARC CPUs implement flash_read64 which calls __raw_readq. |
| |
| For current SPARC architectures (LEON2 and LEON3) each read from the |
| FLASH must lead to a cache miss. This is because FLASH can not be set |
| non-cacheable since program code resides there, and alternatively disabling |
| cache is poor from performance view, or doing a cache flush between each |
| read is even poorer. |
| |
| Forcing a cache miss on a SPARC is done by a special instruction "lda" - |
| load alternative space, the alternative space number (ASI) is processor |
| implementation spcific and can be found by including <asm/processor.h>. |
| |
| Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> |
| |
| commit 70431e8a7393b6b793f77957f95b999fc9a269b8 |
| Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| Date: Fri Mar 28 15:41:25 2008 +0100 |
| |
| Make MPC83xx one step closer to full relocation. |
| |
| Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx |
| and use GOT relative reference. |
| |
| Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 5b2793a3f3de34d439232b05acc8af67a028fd35 |
| Author: Michael Barkowski <michael.barkowski@freescale.com> |
| Date: Thu Mar 27 14:34:43 2008 -0400 |
| |
| mpc8323erdb: fix EEPROM page size and get MAC from EEPROM |
| |
| This patch fixes eeprom page size so that you can now write more than |
| 64 bytes at a time. |
| |
| It also makes the board take MAC addresses, if found, from EEPROM. |
| |
| User should place up to 4 addresses at offset 0x7f00, for |
| eth{,1,2,3}addr. Any unused addresses should be zero. This group of |
| four six-byte values should have it's CRC at the end. crc32 and |
| eeprom commands can be used to accomplish this. |
| |
| If CRC fails, MAC addresses come from the environment. If CRC |
| succeeds, the environment is overwritten at startup. |
| |
| Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 8f325cff31f6e745e6540014b131b9a97f61944c |
| Author: Michael Barkowski <michael.barkowski@freescale.com> |
| Date: Fri Mar 28 15:15:38 2008 -0400 |
| |
| mpc8323erdb: define CONFIG_PCI_SKIP_HOST_BRIDGE |
| |
| Commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 broke the onboard USB |
| controller on the PCI bus in Linux on the MPC8323ERDB. |
| |
| This fixes it by defining CONFIG_PCI_SKIP_HOST_BRIDGE in the board's |
| config file. |
| |
| Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit e5c4ade4db1e16d3e5d4a7887f34e10e516ed3a9 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Mar 28 10:19:07 2008 -0500 |
| |
| mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code |
| |
| in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6, |
| 85xx's "Update SVR numbers to expand support", simplify SPRIDR processing |
| and processor ID display. Add REVID_{MAJ,MIN}OR macros to make |
| REVID dependent code simpler. Also added PARTID_NO_E and IS_E_PROCESSOR |
| convenience macros. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 81fd52c6c8fd19f0b7856b98217ce37c46c521af |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Mar 28 10:18:53 2008 -0500 |
| |
| mpc83xx: display ddr frequency in board_add_ram_info banner |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 35cf155c5ec1ceab2849fa5b6aa3d9a3e9e6f482 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Mar 28 10:18:40 2008 -0500 |
| |
| mpc83xx: unreinvent mem_clk |
| |
| delete ddr_clk and use mem_clk instead. Rename other ddr_*_clk to |
| mem_*_clk for consistency's sake. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 730e792926ca3fe4dd1b734a3bf44e55afa6f536 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Mar 28 14:31:23 2008 -0500 |
| |
| mpc83xx: enable the SATA interface on mpc8315 rdb and mpc837x rdb boards |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 2eeb3e4fc54ef2f5d574dafd42c6ce93afa30393 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Mar 26 22:57:19 2008 +0800 |
| |
| mpc83xx: enable the SATA interface on mpc837xemds board |
| |
| Enable the first two SATA interfaces on MPC837xEMDS board, |
| The two SATA ports are on LYNX1. (SATA0/1 on J4/5) |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 6f8c85e8d1865730c158d9ef5a06c70c3a10600a |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Mar 26 22:56:36 2008 +0800 |
| |
| mpc83xx: initialize serdes for MPC837xEMDS boards |
| |
| This patch is stolen from Anton Vorontsov's patch |
| for mpc837xerdb boards. |
| |
| The reference clk and xcorevdd voltage of serdes1/2 |
| is same between mpc837xemds and mpc837xerdb. |
| |
| 8377E: LYNX1- 2 SATA LYNX2- 2 PCIE |
| 8378E: LYNX1- 2 SGMII LYNX2- 2 PCIE |
| 8379E: LYNX1- 2 SATA LYNX2- 2 SATA |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit cc8e839abc80887ae832767b5930d40edd6d7eb7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Mar 28 14:09:04 2008 +0100 |
| |
| ppc4xx: Canyonlands: Print SATA/PCIe configuration and board revision |
| |
| Canyonlands (460EX) shares the first PCIe interface with the SoC SATA |
| interface. This usage can be configured with the jumper J6. This patch |
| displays the current configuration upon bootup and changes the PCIe |
| init loop, to only initialize the availabel PCIe slots. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 90447ecbbac8572457b6d8903073ac3f120995ba |
| Author: Tor Krill <tor@excito.com> |
| Date: Fri Mar 28 11:29:10 2008 +0100 |
| |
| MTD/CFI: Add support for 16bit legacy AMD flash |
| |
| Add entry for 512Kx16 AMD flash to jedec_table. |
| Read out 16bit device id if chipwidth is 16bit. |
| Fixed coding style after Stefans feedback |
| |
| Signed-off-by: Tor Krill <tor@excito.com> |
| |
| commit 5e12e75d17c4b15a310a45cd78fe71b7698a8a8e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Mar 28 11:02:53 2008 +0100 |
| |
| ppc: Small change to CFG_MEM_TOP_HIDE description |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 280df59a8d62c6e74c281b1cb7e2052df4d6cb00 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Thu Mar 27 15:44:12 2008 +0900 |
| |
| sh: Add support stat structure and stat.h |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 4be9eb789e72b845d6693cc36b70a0b3529b3f09 |
| Author: Mark Jonas <toertel@gmail.com> |
| Date: Sat Mar 22 19:27:52 2008 +0100 |
| |
| sh: Removed warning when compiling drivers/serial/serial_sh.c. |
| |
| Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit f309fa38929ffba71230c02330ffa42f4bba6333 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Wed Mar 12 18:02:57 2008 +0900 |
| |
| sh: Remove disable_ctrlc function from R7780MP |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 6f4b266ff2a4fcc2bff985d6a217852469afddb3 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Wed Mar 12 17:55:15 2008 +0900 |
| |
| sh: Add maintainer of R7780MP to MAINTAINER file |
| |
| Update MAINTAINER entry for R7780MP. And fix maintainer's name. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit f5e2466f7baa887a7df0c536333eea8231333497 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Tue Mar 25 17:11:24 2008 +0900 |
| |
| sh: Add support Renesas Solutions R2D plus board |
| |
| R2D plus is SH reference board used with SH7751R. |
| This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface, |
| one PCI bus, VGA, and two Ethernet controller. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit e92c95180bb5bc5fd4051598a9d60beaba48988d |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Wed Mar 12 12:15:29 2008 +0900 |
| |
| sh: Add support SH4 cache control |
| |
| Add support SH4 cache control and flash_cache function |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 28e5efde4d925fcb34901d0030d0648de2da7e89 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Mon Mar 24 01:53:01 2008 +0900 |
| |
| sh: Add support PCI host driver for SH7751/SH7751R |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit ab8f4d40d069cd3cbe7563ddfe3e5f03b0c7c721 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Mon Mar 24 02:11:26 2008 +0900 |
| |
| sh: Move SuperH PCI driver from cpu/sh4 to drivers/pci |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 566933278101c144d75361ea682678a326c1290d |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Wed Mar 12 12:10:28 2008 +0900 |
| |
| sh: Add support SuperH SH7751/SH7751R |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 3313e0e26224fc9a0c445124f3455058c696df84 |
| Author: Mark Jonas <toertel@gmail.com> |
| Date: Mon Mar 10 11:37:10 2008 +0100 |
| |
| sh: Added support for SH7720 based board MPR2. |
| |
| Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 3ecff1d70ae93e628fe65b3fe1fc7c9c76cdf99f |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Thu Mar 6 14:05:53 2008 +0900 |
| |
| sh: Fix receive FIFO level register of SH4A |
| |
| Receive FIFO level register is different in SH4A. |
| Because register is different, cannot occasionally receive data. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit c133c1fb0b590662206b0eba70f4478ee0300a9a |
| Author: Yusuke Goda <goda.yusuke@renesas.com> |
| Date: Tue Mar 11 12:55:12 2008 +0900 |
| |
| sh: Add support Renesas Solutions R7780MP |
| |
| Renesas Solutions R7780MP is a reference board on SH7780. |
| This board has serial, 10/100 base Ethernet deivice, CF slot |
| and VGA devices. This board can set extension board. |
| Extension board has 10/100/1000 base Ethernet device, PCI slot, |
| S-ATA, iDVR slot. |
| |
| Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 1a2334a4eb6386d7cd35d9de5fa39af2c764ad28 |
| Author: Yusuke Goda <goda.yusuke@renesas.com> |
| Date: Wed Mar 5 14:30:02 2008 +0900 |
| |
| sh: Add support PCI of SuperH and SH7780 |
| |
| This patch add support PCI of SuperH base code and SH7780 specific code. |
| |
| Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit b55523efff2ae11f0b9ae3cc405893c32eb78156 |
| Author: Yusuke Goda <goda.yusuke@renesas.com> |
| Date: Wed Mar 5 14:23:26 2008 +0900 |
| |
| sh: Add support SH7780 |
| |
| SH7780 is CPU of Renesas Technology. |
| This CPU has |
| - CPU clock 400MHz |
| - PCI support |
| - DDR-SDRAM controller |
| - etc ... |
| |
| Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit c2042f5952a686c414031309b8f244513bf578f0 |
| Author: goda.yusuke <goda.yusuke@renesas.com> |
| Date: Fri Jan 25 20:46:36 2008 +0900 |
| |
| sh: Add support Renesas Solutions Migo-R board |
| |
| Migo-R is a board based on SH7722 and has may devices. |
| In this patch, supported SCIF, NOR flash and Ethernet. |
| |
| Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 74d1e66d22dac91388bc538b2fe19f735edc5b82 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Mar 27 15:06:40 2008 +0100 |
| |
| Fix host tool build breakage, take two |
| |
| Revert commit 87c8431f and fix build breakage so that the build continues |
| to work on FC systems. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 7e4a0d25ed18f6437bdf59ebfa49bb0edc2f24e6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 19 09:36:47 2008 +0100 |
| |
| ppc4xx: Enable ECC on LWMON5 |
| |
| Since all ECC related problems seem to be resolved on LWMON5, this patch |
| now enables ECC support. |
| |
| We have to write the ECC bytes by zeroing and flushing in smaller |
| steps, since the whole 256MByte takes too long for the external |
| watchdog. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6433fa202a91a6594dd48f06807ac38ba27fa0bb |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Mon Mar 17 11:10:35 2008 -0500 |
| |
| ppc4xx: Updates to Korat-specific code |
| |
| This patch contains updates for changes for the Korat PPC440EPx board. |
| These changes include: |
| |
| (1) Support for "permanent" and "upgradable" copies of U-Boot, as |
| described in the new "doc/README.korat" file; |
| |
| (2) a new memory map for the registers in the board's CPLD; |
| |
| (3) a revised format for manufacturer's data in serial EEPROM; and |
| |
| (4) changes to track updates to U-Boot for the Sequoia board. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit f766cdf89b3a2a7634b8c5869f606150e332036c |
| Author: Markus Brunner <super.firetwister@gmail.com> |
| Date: Thu Mar 27 10:46:25 2008 +0100 |
| |
| ppc4xx: PPC405EP Set EMAC noise filter bits |
| |
| This bug was introduced with commit aee747f19b460a0e9da20ff21e90fdaac1cec359 |
| which enabled CFG_4xx_GPIO_TABLE for PPC405 and unintentionally |
| disabled the setting of the emac noise filter bits for PPC405EP when CFG_4xx_GPIO_TABLE is set. |
| |
| Signed-off-by: Markus Brunner <super.firetwister@gmail.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f66e2c8b25c04b79e5fb385bc8989c2de7f63991 |
| Author: Mike Nuss <mike@terascala.com> |
| Date: Wed Feb 20 11:54:20 2008 -0500 |
| |
| ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx |
| |
| On PPC440EPx without a bootstrap I2C EEPROM, the PLL can be reconfigured |
| after startup to change the speed of the clocks. This patch adds the |
| option CFG_PLL_RECONFIG. If this option is set to 667, the CPU |
| initialization code will reconfigure the PLL to run the system with a CPU |
| frequency of 667MHz and PLB frequency of 166MHz, without the need for an |
| external EEPROM. |
| |
| Signed-off-by: Mike Nuss <mike@terascala.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 87c8431fe24d48121f053fe67cff4ccfe097d4d1 |
| Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| Date: Thu Mar 27 09:12:40 2008 +0100 |
| |
| new-image: Fix host tool build breakage |
| |
| Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> |
| |
| commit 6fb4b640562a10daff0dbe537638d511b5b48650 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 27 10:24:03 2008 +0100 |
| |
| ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9462732a3ec551c11862450902cd8ee1bedea6d9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 19 10:23:43 2008 +0100 |
| |
| ppc4xx: Add fdt support to Prodrive alpr |
| |
| Since this board will probably be ported to arch/powerpc in the |
| near future, we add device tree support now. This way we are |
| "ready" for arch/powerpc from now on. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 511e4f9e7f7b6719e4d91d7f0fc89412b13b5150 |
| Author: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl> |
| Date: Mon Mar 17 09:27:56 2008 +0100 |
| |
| ppc4xx: Enable cache support on the ALPR board |
| |
| Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl> |
| |
| commit 14f73ca679f6fdb44cff0b7304d419db41a0ab69 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 26 10:14:11 2008 +0100 |
| |
| ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched" |
| |
| If CFG_MEM_TOP_HIDE is defined in the board config header, this specified |
| memory area will get subtracted from the top (end) of ram and won't get |
| "touched" at all by U-Boot. By fixing up gd->ram_size the Linux kernel |
| should gets passed the now "corrected" memory size and won't touch it |
| either. This should work for arch/ppc and arch/powerpc. Only Linux board |
| ports in arch/powerpc with bootwrapper support, which recalculate the |
| memory size from the SDRAM controller setup, will have to get fixed |
| in Linux additionally. |
| |
| This patch enables this config option on some PPC440EPx boards as a workaround |
| for the CHIP 11 errata. Here the description from the AMCC documentation: |
| |
| CHIP_11: End of memory range area restricted access. |
| Category: 3 |
| |
| Overview: |
| The 440EPx DDR controller does not acknowledge any |
| transaction which is determined to be crossing over the |
| end-of-memory-range boundary, even if the starting address is |
| within valid memory space. Any such transaction from any PLB4 |
| master will result in a PLB time-out on PLB4 bus. |
| |
| Impact: |
| In case of such misaligned bursts, PLB4 masters will not |
| retrieve any data at all, just the available data up to the |
| end of memory, especially the 440 CPU. For example, if a CPU |
| instruction required an operand located in memory within the |
| last 7 words of memory, the DCU master would burst read 8 |
| words to update the data cache and cross over the |
| end-of-memory-range boundary. Such a DCU read would not be |
| answered by the DDR controller, resulting in a PLB4 time-out |
| and ultimately in a Machine Check interrupt. The data would |
| be inaccessible to the CPU. |
| |
| Workaround: |
| Forbid any application to access the last 256 bytes of DDR |
| memory. For example, make your operating system believe that |
| the last 256 bytes of DDR memory are absent. AMCC has a patch |
| that does this, available for Linux. |
| |
| This patch sets CFG_MEM_TOP_HIDE for the following 440EPx boards: |
| lwmon5, korat, sequoia |
| |
| The other remaining 440EPx board were intentionally not included |
| since it is not clear to me, if they use the end of ram for some |
| other purpose. This is unclear, since these boards have CONFIG_PRAM |
| defined and even comments like this: |
| |
| PMC440.h: |
| /* esd expects pram at end of physical memory. |
| * So no logbuffer at the moment. |
| */ |
| |
| It is strongly recommended to not use the last 256 bytes on those |
| boards too. Patches from the board maintainers are welcome. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c664bf8c3c9bb9e236891f0d8dfda883e86d159b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 27 10:09:05 2008 +0100 |
| |
| ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d56a3ce179688cde61073a3690e21703d68fafd7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 25 17:51:13 2008 +0100 |
| |
| ppc4xx: Correctly pass phyiscal FLASH base address into dtb |
| |
| The routine ft_board_setup() configures the EBC NOR mappings for the |
| Linux physmap_of driver. Since on 460EX/GT we remap the FLASH from |
| 0x4.fc00.0000 to 0x4.cc00.0000 because of the max. 16MByte boot-CS |
| problem, we need to pass the corrected address here too. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9ad31989de12ce5c67b07c4867ead47465655c4b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 19 16:35:12 2008 +0100 |
| |
| ppc4xx: Fix compilation warning in 4xx_enet.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4c9e855734c523900322a7c3cdd9099b4f51b51d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 19 16:20:49 2008 +0100 |
| |
| ppc4xx: Add AMCC Glacier 406GT eval board support |
| |
| This patch adds support for the AMCC Glacier 460GT eval board. |
| The main difference to the Canyonlands board are listed here: |
| |
| - 4 ethernet ports instead of 2 |
| - no SATA port |
| - no USB port |
| |
| Currently EMAC2+3 are not working. This will be fixed in a later |
| release. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d8bd643141af4710d7f1b69bbab6b760de0af0a1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 27 08:47:26 2008 +0100 |
| |
| ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit b9670dd85be6e0496ef2e231043c23cad9b1d903 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Wed Mar 26 21:05:43 2008 +0100 |
| |
| Fix out of tree building issue |
| |
| Currently U-Boot building in some external directory |
| doesn't work. This patch tries to fix the problem. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit d4ee711d8a5c366ee3f857c26b927d12e66614ff |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Wed Mar 26 18:13:33 2008 +0100 |
| |
| README: update documentation (availability, links, etc.) |
| |
| Fix typo in README |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit e813eae3bfeba9c0bda9d1bf9fc3d081f790972f |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Wed Mar 26 17:47:44 2008 +0100 |
| |
| Fix compilation error in cmd_usb.c |
| |
| This patch fixes compilation error |
| cmd_usb.c: In function 'do_usb': |
| cmd_usb.c:552: error: void value not ignored as it ought to be |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit d8c82db482d6b535d12b419d6440b88bf7091c9b |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Fri Mar 14 17:45:29 2008 -0500 |
| |
| Add support for setting the I2C bus speed in fsl_i2c.c |
| |
| Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying |
| the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro, |
| but fsl_i2c.c ignores it and uses conservative value when programming the |
| I2C bus speed. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit d049cc7f71c0d875e8f5099d1ed23666a82b8f8e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Mar 27 00:03:57 2008 +0100 |
| |
| Coding style cleanup, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Mar 26 22:55:32 2008 +0800 |
| |
| drivers: add the support for Freescale SATA controller |
| |
| Add the Freescale on-chip SATA controller driver to u-boot, |
| The SATA controller is used on the 837x and 8315 targets, |
| The driver can be used to load kernel, fs and dtb. |
| |
| The features list: |
| - 1.5/3 Gbps link speed |
| - LBA48, LBA28 support |
| - DMA and FPDMA support |
| - Two ports support |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit bede87f4c87c3ccd868cc60ebf792e0560c6d024 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Mar 26 22:54:44 2008 +0800 |
| |
| ata: add the readme for SATA command line |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit cd54081cd479e542fc399b8a40651ff11a1ad849 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Mar 26 22:53:24 2008 +0800 |
| |
| ata: enable the sata initialize on boot up |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 69386383c5c2b323c66495b0b0cef6a9714d83bf |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Mar 26 22:52:36 2008 +0800 |
| |
| ata: add the fis struct for SATA |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit ffc664e80dfb2e17de0df5ad39e91a02e9c361bc |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Mar 26 22:51:44 2008 +0800 |
| |
| ata: add the libata support |
| |
| add simple libata support in u-boot |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 8e9bb43429e50df55fa41932cbe65841ff579220 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Mar 26 22:50:45 2008 +0800 |
| |
| ata: make the ata_piix driver using new SATA framework |
| |
| original ata_piix driver is using IDE framework, not real |
| SATA framework. For now, the ata_piix driver is only used |
| by x86 sc520_cdp board. This patch makes the ata_piix driver |
| use the new SATA framework, so |
| |
| - remove the duplicated command stuff |
| - remove the CONFIG_CMD_IDE define in the sc520_cdp.h |
| - add the CONFIG_CMD_SATA define to sc520_cdp.h |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit c7057b529c3c3cb9c0ac9060686a4068f1491bbe |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Mar 26 22:49:44 2008 +0800 |
| |
| ata: add the support for SATA framework |
| |
| - add the SATA framework |
| - add the SATA command line |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 83c7f470a4ce94f33600f11ae85ce4dcf00aa90c |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Mar 26 22:48:18 2008 +0800 |
| |
| ata: merge the header of ata_piix driver |
| |
| move the sata.h from include/ to drivers/block/ata_piix.h |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 9eef62804d9695425b24c87b46a61a7fa74afee0 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Mar 26 22:47:06 2008 +0800 |
| |
| ata: merge the ata_piix driver |
| |
| move the cmd_sata.c from common/ to drivers/ata_piix.c, |
| the cmd_sata.c have some part of ata_piix controller drivers. |
| consolidate the driver to have better framework. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit b9e749e95354f33eb5dc6653c6db7d502adb95fe |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Wed Mar 26 18:26:43 2008 +0100 |
| |
| USB, Storage: fix a bug introduced in commit |
| f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 that will cause usb_stor_info |
| to only print only information on one storage device, but not for |
| multiple. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 841e5edd1623f3fecb6bffc5c2f938ed7a947360 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Wed Mar 26 17:47:44 2008 +0100 |
| |
| Fix compilation error in cmd_usb.c |
| |
| This patch fixes compilation error |
| cmd_usb.c: In function 'do_usb': |
| cmd_usb.c:552: error: void value not ignored as it ought to be |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit dd6c910aadf27c822f17b87eae1a9bd0b2e3aa15 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Mar 26 08:53:53 2008 -0500 |
| |
| 85xx: Add cpu_mp_lmb_reserve helper to reserve boot page |
| |
| Provide a board_lmb_reserve helper function to ensure we reserve |
| the page of memory we are using for the boot page translation code. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 79679d80021ab095e639e250ca472fe526da02e2 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Mar 26 08:34:25 2008 -0500 |
| |
| 85xx: Update multicore boot mechanism to ePAPR v0.81 spec |
| |
| The following changes are needed to be inline with ePAPR v0.81: |
| |
| * r4, r5 and now always set to 0 on boot release |
| * r7 is used to pass the size of the initial map area (IMA) |
| * EPAPR_MAGIC value changed for book-e processors |
| * changes in the spin table layout |
| * spin table supports a 64-bit physical release address |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 25eedb2c1958a13110c7de1fc809b624053cc69c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Mar 19 15:02:07 2008 -0500 |
| |
| FSL: Clean up board/freescale/common/Makefile |
| |
| Each file that can be built here now follows some |
| CONFIG_ option so that they are appropriately built |
| or not, as needed. And CONFIG_ defines were added |
| to various board config files to make sure that happens. |
| |
| The other board/freescale/*/Makefiles no longer need |
| to reach up and over into ../common to build their |
| individually needed files any more. |
| |
| Boards that are CDS specific were renamed with cds_ prefix. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a5af4b358a7caa9c0aa374d4d894bf762ec37669 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 27 22:00:27 2008 -0600 |
| |
| 85xx: Fix merge duplication |
| |
| ft_fixup_cpu() got duplicated in some merge snafu. Remove the duplicate. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 5893b3d0a4084f87a06a5d3dc03db91206818941 |
| Author: James Yang <James.Yang@freescale.com> |
| Date: Tue Feb 12 16:35:07 2008 -0600 |
| |
| 85xx: Expand CCSR space with more DDR controller registers. |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit a3e77fa5359b3f9f59e4e946b46d57a53057cc85 |
| Author: James Yang <James.Yang@freescale.com> |
| Date: Fri Feb 8 18:05:08 2008 -0600 |
| |
| 85xx: Speed up get_ddr_freq() and get_bus_freq() |
| |
| get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were |
| called. However, get_sys_info() recalculates extraneous information when |
| called each time. Have get_ddr_freq() and get_bus_freq() return memoized |
| values from global_data instead. |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit e9ea679918fbc9a53fa2f2a904aac874ea736036 |
| Author: James Yang <James.Yang@freescale.com> |
| Date: Fri Feb 8 16:46:27 2008 -0600 |
| |
| 85xx: Show DDR memory data rate in addition to the memory clock frequency. |
| |
| Show the DDR memory data rate in addition to the memory clock |
| frequency. For DDR/DDR2 memories the memory data rate is 2x the |
| memory clock. |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 591933ca6eabc440e6ed6967233aaf56fce464a3 |
| Author: James Yang <James.Yang@freescale.com> |
| Date: Fri Feb 8 16:44:53 2008 -0600 |
| |
| 85xx: get_tbclk() speed up and rounding fix |
| |
| Speed up get_tbclk() by referencing pre-computed bus clock |
| frequency value from global data instead of sys_info_t. Fix |
| rounding of result to nearest; previously it was rounding |
| upwards. |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Feb 6 01:19:40 2008 -0600 |
| |
| Update SVR numbers to expand support |
| |
| FSL has taken to using SVR[16:23] as an SOC sub-version field. This |
| is used to distinguish certain variants within an SOC family. To |
| account for this, we add the SVR_SOC_VER() macro, and update the SVR_* |
| constants to reflect the larger value. We also add SVR numbers for all |
| of the current variants. Finally, to make things neater, rather than |
| use an enormous switch statement to print out the CPU type, we create |
| and array of SVR/name pairs (using a macro), and print out the CPU name |
| that matches the SVR SOC version. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit b83eef440cf3cef816172ccbb5897ccd8e403cf3 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Feb 6 01:12:57 2008 -0600 |
| |
| Add the Freescale PCI device IDs |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 7aff0c051ad0613171cf2b9941ee48675c62e7cd |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Feb 14 11:04:23 2008 -0600 |
| |
| 85xx: Added support for multicore boot mechanism |
| |
| Added the cpu command that provides a generic mechanism to get status, |
| reset, and release secondary cores in multicore processors. |
| |
| Added support for using the ePAPR defined spin-table mechanism on 85xx. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit ec2b74ffd36f02c6123725e7c2533dd2deaf4b64 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 16:48:33 2008 -0600 |
| |
| 85xx: Added support for multicore boot mechanism |
| |
| Added the cpu command that provides a generic mechanism to get status, |
| reset, and release secondary cores in multicore processors. |
| |
| Added support for using the ePAPR defined spin-table mechanism on 85xx. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f69766e4b5d47ecd3aa58677a8da875694f364f2 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 30 14:55:14 2008 -0600 |
| |
| 85xx: Add the concept of CFG_CCSRBAR_PHYS |
| |
| When we go to 36-bit physical addresses we need to keep the concept of |
| the physical CCSRBAR address seperate from the virtual one. |
| |
| For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Mar 26 15:38:47 2008 +0100 |
| |
| Coding style cleanup. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit da8808df7a9cef5a3d2ee286ef9ebf9de1780660 |
| Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| Date: Wed Mar 26 13:02:13 2008 +0100 |
| |
| Add CFG_RTC_DS1337_NOOSC to turn off OSC output |
| |
| The default settings for RTC DS1337 keeps the OSC |
| output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to |
| turn it off. |
| |
| Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| |
| commit 438a4c11260b4ea9805039b0b4f92f9df5306b02 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Mar 26 11:48:46 2008 +0100 |
| |
| Cleanup coding style, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 218ca724c08ca8a649f0917cf201cf23d4b33f39 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Mar 26 10:40:12 2008 +0100 |
| |
| README: update documentation (availability, links, etc.) |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 |
| Author: Aras Vaichas <arasv@magtech.com.au> |
| Date: Tue Mar 25 12:09:07 2008 +1100 |
| |
| USB Storage, add meaningful return value |
| |
| This patch changes the "usb storage" command to return success if it |
| finds a USB storage device, otherwise it returns error. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 18e69a35efbb078403db0c0063986470dad7d082 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Fri Mar 14 23:20:18 2008 +0300 |
| |
| 83xx/fdt_support: let user specifiy FSL USB Dual-Role controller role |
| |
| Linux understands "host" (default), "peripheral" and "otg" (broken). |
| Though, U-Boot doesn't restrict dr_mode variable to these values (think |
| of renames in future). |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit c7604783b236e368f225efb7b3efb418fe20b404 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Fri Mar 14 23:20:30 2008 +0300 |
| |
| tsec: fix link detection for the RTL8211B PHY |
| |
| RTL8211B sets link state register after autonegotiation complete, |
| so with bootdelay=0 RTL8211B will report lack of the link. |
| |
| To fix this, we should wait for aneg to complete, even if the |
| link is currently down. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 7fa9cbb00dc83fcf175042b6f20c2c9bce9a15f4 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 20:47:09 2008 +0300 |
| |
| mpc83xx: add "fsl,soc" and "fsl,immr" compatible fixups |
| |
| device_type = "soc" is being deprecated, newer device trees will use |
| "fsl,soc" and/or "fsl,immr" for the soc nodes. |
| |
| This patch also adds clock-frequency property for soc nodes (the same |
| value as bus-frequency). |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 507e2d79c91441a0bb2cd3d0c31c8bfe3f8cec07 |
| Author: Joe D'Abbraccio <ljd015@freescale.com> |
| Date: Mon Mar 24 13:00:59 2008 -0400 |
| |
| Modified the DDR SDRAM clock control register to delay MCK/MCK_B 3/4 clock |
| |
| With the original value of 1/2 clock cycle delay, the system ran relatively |
| stable except when we run benchmarks that are intensive users of memory. |
| When I run samba connected disk with a HDBENCH test, the system locks-up |
| or reboots sporadically. |
| |
| Signed-off by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com> |
| |
| commit a7ba32d480a86db5db8dcd8ca66b21b4cadda923 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Mar 24 12:44:13 2008 -0500 |
| |
| mpc83xx: Set PCI I/O bus-address base to zero. |
| |
| The device trees for these boards describe PCI I/O as starting from |
| address zero from the device's perspective. |
| |
| Placing I/O elsewhere may cause problems with certain PCI boards, and may |
| cause problems with Linux. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit f700e7df7fecf2d3765ae568ce77ce788cde4f3e |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 20:47:05 2008 +0300 |
| |
| mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK |
| |
| At least on the "33MHz Pilot" board crystal is actually 33.3MHz. |
| This patch fixes "system time drifting" problem. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 3a0cfdd576dc9b16d1468d37339182607c697fb7 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 20:47:02 2008 +0300 |
| |
| mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS |
| |
| This is needed to update /choosen/linux,stdout-path properly. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 3419eb62f088d7a22f1d2a3cebf76b77e408b5b9 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 20:47:00 2008 +0300 |
| |
| mpc83xx: MPC8360E-RDK: add dhcp command |
| |
| Plus modify environment to use it and remove bootfile env variable, |
| it is internal and CONFIG_BOOTFILE is used for these purposes. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit d892b2dbb4087a26778bfd42470c3ea7d0e2b6aa |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 20:46:57 2008 +0300 |
| |
| mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc |
| |
| Current DDR setup easily causes memory corruption, this patch fixes it. |
| |
| Also fix TIMING_CFG0_MRS_CYC definition. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit d47d49cc37a38f2719a3e1b9bbe08ac810cf2d9a |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 20:46:53 2008 +0300 |
| |
| mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI |
| |
| This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen |
| controller and FHCI (QE USB). |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 7ad959490962e6842648d87d4bd795ea6cdcce67 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 20:46:51 2008 +0300 |
| |
| mpc83xx: MPC8360E-RDK: add support for NAND |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 9a3e832aeb491861d029991241572ebdf4b5b61b |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 20:46:46 2008 +0300 |
| |
| mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode |
| |
| This is needed for BCM PHYs to work on this board. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 300615dc5d9b0a2022fbc6af0c13159e33fd752e |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 20:46:34 2008 +0300 |
| |
| uec: add support for Broadcom BCM5481 Gigabit PHY |
| |
| This patch adds basic support for Broadcom BCM5481 PHY. |
| |
| RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is |
| Peter Barada <peterb@logicpd.com>. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 6a600c3a1876bc203445df4f0fd6b12648259666 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 20:46:28 2008 +0300 |
| |
| uec: add support for RGMII_RXID interface mode |
| |
| PHY drivers will use it to setup software delay between RXD and RXC |
| signals. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 91cdaa3a9d7562b869d96774e9c9ddf142c0848d |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 20:46:24 2008 +0300 |
| |
| uec: add support for gbit mii status readings |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit aabce7fb505ffe55ebf3bf4dcafdae97a581558d |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 17:40:47 2008 +0300 |
| |
| 83xx: define CONFIG_OF_STDOUT_VIA_ALIAS for the MPC837XERDB boards |
| |
| This is primarily for the early console support. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 2bd7460e9283ec98565189b3cdbcfb2bcdcdd635 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 17:40:43 2008 +0300 |
| |
| 83xx: initialize serdes for MPC837XRDB boards |
| |
| On the MPC8377ERDB: 2 SATA and 2 PCI-E. |
| On the MPC8378ERDB: 2 PCI-E |
| On the MPC8379ERDB: 4 SATA |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 453316a2a19642d8afcbca7452e40a6b44a197b1 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 17:40:32 2008 +0300 |
| |
| 83xx: serdes setup routines |
| |
| This patch adds few routines to configure serdes on 837x targets. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit a796cdf9c377cb4e5d61d1079a296608f8fbd903 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 17:40:27 2008 +0300 |
| |
| 83xx: split COBJS onto separate lines |
| |
| ..plus get rid of some #ifdefs in the .c files. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 46a3aeea73c13ab04ebf7a8739afb87ac5da94a3 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Mar 24 17:40:23 2008 +0300 |
| |
| 83xx: nand support for MPC837XRDB boards |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 82e45a204190593e8613145a928f998fb8c909c4 |
| Author: Jerry Van Baren <gvb.uboot@gmail.com> |
| Date: Tue Mar 18 21:44:41 2008 -0400 |
| |
| Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 0fa7a1b4719e325fce332689fb8754ec166191ff |
| Author: Michael Barkowski <michael.barkowski@freescale.com> |
| Date: Thu Mar 20 13:15:39 2008 -0400 |
| |
| mpc8323erdb: remove RTC and add EEPROM |
| |
| There's no on-board RTC on the MPC8323ERDB, but there is an EEPROM. |
| |
| Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> |
| Acked-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 5bbeea86eb6afb872374cd23217cb3c1018443ed |
| Author: Michael Barkowski <michael.barkowski@freescale.com> |
| Date: Thu Mar 20 13:15:34 2008 -0400 |
| |
| mpc8323erdb: Improve the system performance |
| |
| The following changes are based on kernel UCC ethernet performance: |
| |
| 1. Make the CSB bus pipeline depth as 4, and enable the repeat mode |
| 2. Optimize transactions between QE and CSB. Added CFG_SPCR_OPT |
| switch to enable this setting. |
| |
| The following changes are based on the App Note AN3369 and |
| verified to improve memory latency using LMbench: |
| |
| 3. CS0_CONFIG[AP_n_EN] is changed from 1 to 0 |
| 4. CS0_CONFIG[ODT_WR_CONFIG] set to 1. Was a reserved setting |
| previously. |
| 5. TIMING_CFG_1[WRREC] is changed from 3clks to 2clks (based on |
| Twr=15ns, and this was already the setting in DDR_MODE) |
| 6. TIMING_CFG_1[PRETOACT] is changed from 3clks to 2clks. (based on |
| Trp=15ns) |
| 7. TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 6clks. (based on |
| Tras=40ns) |
| 8. TIMING_CFG_1[ACTTORW] is changed from 3clks to 2clks. (based on |
| Trcd=15ns) |
| 9. TIMING_CFG_1[REFREC] changed from 21 clks to 11clks. (based on |
| Trfc=75ns) |
| 10. TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 7clks. (based |
| on Tfaw=50ns) |
| 11. TIMING_CFG_2[ADD_LAT] and DDR_MODE[AL] changed from 0 to 1 (based |
| on CL=3 and WL=2). |
| |
| Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> |
| Acked-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit fc549c871f43933396a5b3e21d897023d4b31b8d |
| Author: Michael Barkowski <michael.barkowski@freescale.com> |
| Date: Thu Mar 20 13:15:28 2008 -0400 |
| |
| mpc8323erdb: use readable DDR config macros |
| |
| Use available shift/mask macros to define DDR configuration. |
| |
| Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> |
| Acked-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 89c7784ed90ba50301eec521144f95111e472906 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Fri Feb 8 13:15:55 2008 -0600 |
| |
| 83xx: Add Vitesse VSC7385 firmware uploading |
| |
| Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload |
| the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET. |
| Cleaned up the board header files to make selecting the VSC7385 easier to |
| control. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit b55d98c6d5b8694e560a0e727b14cb6921d7cfcc |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Fri Feb 8 13:15:54 2008 -0600 |
| |
| NET: Add Vitesse VSC7385 firmware uploading |
| |
| The Vitesse VSC7385 is a 5-port switch found on the Freescale MPC8349E-mITX |
| and other boards. A small firwmare must be uploaded to its on-board memory |
| before it can be enabled. This patch adds the code which uploads firmware |
| (but not the firmware itself). |
| |
| Previously, this feature was provided by a U-Boot application that was |
| made available only on Freescale BSPs. The VSC7385 firmware must still |
| be obtained separately, but at least there is no longer a need for a separate |
| application. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Acked-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit aa6f6d171a1f9f46ee4f03ad6acb97a6bfb71855 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Mar 26 00:52:10 2008 +0100 |
| |
| Coding Style cleanyp; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 43ddd9c820fec44816188f53346b464e20b3142d |
| Author: Jerry Van Baren <gvb.uboot@gmail.com> |
| Date: Sat Mar 22 14:23:49 2008 -0400 |
| |
| Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T |
| |
| These defines embedded the u-boot env variables and/or the bd_t structure |
| in the fdt blob. The conclusion of discussion on the u-boot email list |
| was that embedding these in the fdt blob is not useful: there are better |
| ways of passing the data (in fact, the fdt blob itself replaces the |
| bd_t struct). |
| |
| The only board that enables these is the stxxtc and they don't appear |
| to be used by linux. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| Acked-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 22ed2285743359fd1fe73e411dff914b2256e68f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Mar 17 10:49:25 2008 +0100 |
| |
| rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1bb707c39a0833e91d9f797dd862aaaaf4af264d |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Mon Mar 17 08:54:06 2008 +0900 |
| |
| Add Flex-OneNAND booting support |
| |
| Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array |
| using a NOR Flash interface. This on-chip integration enables system designers |
| to reduce external system logic and use high-density NAND Flash |
| in applications that would otherwise have to use more NOR components. |
| |
| Flex-OneNAND enables users to configure to partition it into SLC and MLC areas |
| in more flexible way. While MLC area of Flex-OneNAND can be used to store data |
| that require low reliability and high density, SLC area of Flex-OneNAND |
| to store data that need high reliability and high performance. Flex-OneNAND |
| can let users take advantage of storing these two different types of data |
| into one chip, which is making Flex-OneNAND more cost- and space-effective. |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit c512389cc4a10253249271ff6c887c6dab1f0db2 |
| Author: André Schwarz <andre.schwarz@matrix-vision.de> |
| Date: Thu Mar 13 13:50:52 2008 +0100 |
| |
| MPC5200: support setup without FEC |
| |
| Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is |
| defined. Systems without FEC, i.e. no FEC node in DTB, should be possible. |
| |
| Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> |
| Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit aa3511e422946041ef626f80a05ae5e8bfc700e6 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Mar 5 18:05:46 2008 -0600 |
| |
| FSL: Move board/mpc8266ads under board/freescale |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7f1d846e5c5754449c286587d099d85246062772 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Mar 5 18:05:47 2008 -0600 |
| |
| FSL: Move board/mpc7448hpc2 under board/freescale |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b7e24d283e34727c2a6cdfdac2e09a426c579b73 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Mar 5 18:05:45 2008 -0600 |
| |
| FSL: Move board/mpc8260ads under board/freescale |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 6a8a5dc4759867c45aa95580deb8bf26669a5d97 |
| Author: goda.yusuke <goda.yusuke@renesas.com> |
| Date: Wed Mar 5 17:08:33 2008 +0900 |
| |
| net: Add support AX88796L ethernet device |
| |
| AX88796L is device of NE2000 compatible. |
| This patch support AX88796L ethernet device. |
| |
| Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> |
| Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit e0a6140dd381e1eed1ada2291166ef2616d8822b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Mar 25 22:50:41 2008 +0100 |
| |
| ne2000 driver: change #ifdef to Makefile conditional compilation |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e710185aae90c64d39c2d453e40e58ceefe4f250 |
| Author: goda.yusuke <goda.yusuke@renesas.com> |
| Date: Wed Mar 5 17:08:20 2008 +0900 |
| |
| net: Divided code of NE2000 ethernet driver |
| |
| There are more devices of the NE2000 base. |
| A present code is difficult for us to support more devices. |
| To support more NE2000 clone devices, separated the function. |
| |
| Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> |
| Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 395bce4f59a507a60a475f7ee46bed47de9482df |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sun Feb 24 23:58:13 2008 -0500 |
| |
| net/Blackfin: move on-chip MAC driver into drivers/net/ |
| |
| The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board |
| directory, but it is not board specific, so relocate it to the drivers dir |
| so that other Blackfin ports can utilize it. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 8a30b4700942f37495d2e67f5998cdffb6e3ba8a |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sun Feb 24 23:52:35 2008 -0500 |
| |
| smc91111: use SSYNC() rather than asm(ssync) for Blackfin |
| |
| Since the "ssync" instruction may have hardware anomalies associated with |
| it, have the smc91111 driver use the SSYNC macro rather than invoking it |
| directly. We workaround all the anomalies via this macro. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 77ff7b7444ceb8022b46114f3d0b6d18e2fd1138 |
| Author: Bryan O'Donoghue <bodonoghue@codehermit.ie> |
| Date: Sun Feb 17 22:57:47 2008 +0000 |
| |
| 8xx: Update OF support on 8xx |
| |
| This patch does some shifting around of OF support on 8xx. |
| |
| Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie> |
| |
| commit 9c666a7db0b2285a270c68810889ce7d5dba304b |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Feb 15 15:16:18 2008 -0600 |
| |
| ppc: Allow boards to specify how much memory they can map |
| |
| For historical reasons we limited the stack to 256M because some boards |
| could only map that much via BATS. However newer boards are capable of |
| mapping more memory (for example 85xx is capble of doing up to 2G). |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit a6f5f317cd074bbbfa2aab4fca05904c811c19fb |
| Author: Bryan O'Donoghue <bodonoghue@codehermit.ie> |
| Date: Fri Feb 15 01:05:58 2008 +0000 |
| |
| 8xx : Add OF support to Adder875 board port - resubmit |
| |
| Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie> |
| |
| commit d058698fd2d9f769ff38ac53c8708b3fdd314f2d |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Feb 14 20:44:42 2008 -0600 |
| |
| Add setexpr command |
| |
| Add a simple expr style command that will set an env variable as the result |
| of the command. This allows us to do simple math in shell. The following |
| operations are supported: &, |, ^, +, -, *, /. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 3f105faa64b9826e088711fdfcaa70cb1230397a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Mar 5 17:27:48 2008 -0600 |
| |
| FSL: Move board/mpc7448hpc2 under board/freescale |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 449c703374a8868453425e15da7e2f76221b72e4 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Mar 5 17:21:43 2008 -0600 |
| |
| FSL: Move board/mpc8266ads under board/freescale |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 5863577989ad689427bb750107e9a75f1c1645d2 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Mar 5 16:41:41 2008 -0600 |
| |
| FSL: Move board/mpc8260ads under board/freescale |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 8a773983957ee6c4aa344469b742f29c7d26afbd |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 21:30:08 2008 +0900 |
| |
| [MIPS] Move gth2_config from ARM section to MIPS |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 373b16fc0c5ae34d28b9027f809ae3cbf45cdd15 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 21:30:07 2008 +0900 |
| |
| [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit d98e348e2ed5aab8f7a6471ff628ab0688b8a459 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 21:30:07 2008 +0900 |
| |
| [MIPS] Fix dcache_status() |
| |
| You can't judge UNCACHED by Config.K0 LSB. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit b0c66af53ec9385ac2d1cc2e5d7d1ecdc81caf34 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 21:30:07 2008 +0900 |
| |
| [MIPS] Introduce _machine_restart |
| |
| Handles machine specific functions by using weak functions. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit decaba6f5cf386d569ac3997bebb871b966c6b18 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 21:30:07 2008 +0900 |
| |
| [MIPS] Cleanup CP0 Status initialization |
| |
| Add setup_c0_status from Linux. For the moment we disable interrupts, set |
| CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for |
| reset-time configuration and will work well across most processors. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit d43d43ef2845af309c25a64bb9c2c5fb3261bc23 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 21:30:07 2008 +0900 |
| |
| [MIPS] Initialize CP0 Cause before setting up CP0 Status register |
| |
| Without this change, we'll be suffering from deffered WATCH exception |
| once Status.EXL is cleared. Make sure Cause.WP is cleared. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 26138623230ca2bad3c78e05a65527ea70c8b688 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 21:30:07 2008 +0900 |
| |
| [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init() |
| |
| Move things to appropriate place. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit ccf8f824ef67df028dedb29f8ea5d71a5a88d895 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 21:30:06 2008 +0900 |
| |
| [MIPS] Implement flush_cache() |
| |
| We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you |
| don't need to do Hit_Invalidate_I, but flush_cache() needs it since this |
| function is used not only in U-Boot specfic programs but also at loading |
| target binaries. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 2e0e5271aac917812a76c72030a2b2c6f1d3387d |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 21:30:06 2008 +0900 |
| |
| [MIPS] Fix I-/D-cache initialization loops |
| |
| Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I |
| again per a loop for I-cache initialization. But according to 'See MIPS |
| Run', we're encouraged to use three separate loops rather than combining |
| them *for both I- and D-cache*. This patch tries to fix this. |
| |
| In accordance with fixing above, mips_init_[id]cache are separated from |
| mips_cache_reset(), and rewrite cache loops are completely rewritten with |
| useful macros. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 1898840797c7f50799377bd5b285a8a93a82c419 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 21:30:06 2008 +0900 |
| |
| [MIPS] Replace memory clearance code with f_fill64 |
| |
| This routine fills memory with zero by 64 bytes, and is 64-bit capable. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 2f5d414ccb4024dd0992ff6b22561732dbc73590 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 21:30:06 2008 +0900 |
| |
| [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros |
| |
| This patch replaces the current function definitions with NESTED, LEAF |
| and END macro. They specify some more additional information about the |
| function; an alignment of symbol, type of symbol, stack frame usage, etc. |
| These information explicitly tells the assembler and the debugger about |
| the types of code we want to generate. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 282223a607c611425fa33f5428f8eae6636972bb |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 11:43:17 2008 +0900 |
| |
| [MIPS] asm headers' updates |
| |
| Make some asm headers adjusted to the latest Linux kernel. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit e1390801a3c1a2b6d12fa90be368efc19f5b9bfd |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Tue Mar 25 11:39:29 2008 +0900 |
| |
| [MIPS] Request for the 'mips_cache_lock()' removal |
| |
| The initial intension of having mips_cache_lock() was to use the cache |
| as memory for temporary stack use so that a C environment can be set up |
| as early as possible. |
| |
| But now mips_cache_lock() follow lowlevel_init(). We've already have the |
| real memory initilaized at this point, therefore we could/should use it. |
| No reason to lock at all. |
| |
| Other problems: |
| |
| Cache locking is not consistent across MIPS implementaions. Some imple- |
| mentations don't support locking at all. The style of locking varies - |
| some support per line locking, others per way, etc. Some parts use bits |
| in status registers instead of cache ops. Current mips_cache_lock() is |
| not necessarily general-purpose. |
| |
| And this is worthy of special mention; once U-Boot/MIPS locks the lines, |
| they are never get unlocked, so the code relies on whatever gets loaded |
| after U-Boot to re-initialize the cache and clear the locks. We're sup- |
| posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented, |
| but leave the situation as it is for a long time. |
| |
| For these reasons, I proposed the removal of mips_cache_lock() from the |
| global start-up code. |
| |
| This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that |
| *things have changed*. If he wants the same behavior as before, he needs |
| to have CFG_INIT_RAM_LOCK_MIPS in his config file. |
| |
| If we don't have any regression report through several releases, then |
| we'll remove codes entirely. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Acked-by: Andrew Dyer <amdyer@gmail.com> |
| |
| commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Mon Mar 24 11:30:54 2008 +0100 |
| |
| lwmon5 SYSMON POST: fix backlight control |
| |
| If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be |
| run on the board, then the SYSMON POST controls the display backlight |
| (doesn't switch backlight ON if POST FAILED, and does switch the |
| backlight ON if PASSED). |
| |
| If not, then the video driver controls the display backlight (just |
| switch ON the backlight upon initialization). |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit ff2bdfb2c1e073f65c065011f1e18d0a130bd3d8 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Mon Mar 24 11:29:14 2008 +0100 |
| |
| lwmon5 SYSMON POST: fix handling of negative temperatures |
| |
| Fix errors in the LWMON5 Sysmon POST for negative temperatures. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Fri Mar 7 16:04:25 2008 +0900 |
| |
| pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option |
| |
| In current source code, when the device number of PCI is 0, process PCI |
| bridge without fail. However, when the device number is 0, it is not PCI |
| always bridge. There are times when device of PCI allocates. |
| |
| When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when |
| use this patch. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 86aea3eaefa248ffb9328e2b50c64720489cdbeb |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Fri Mar 21 09:18:40 2008 +0100 |
| |
| LWMON5: fix dsPIC POST |
| |
| Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> --- |
| |
| commit 388b82fddc7c05596f3f615f190da0448227dc82 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Mar 20 23:23:13 2008 +0100 |
| |
| [new uImage] Enable new uImage support for the pcs440ep board. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 95f4ec2b9c910c7261e6f060ea530d58b039692d |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Mar 20 23:23:13 2008 +0100 |
| |
| [new uImage] Do not compile new uImage format support by default |
| |
| Disable default building of new uImage format support in preparation |
| for merge with the master. Support for new format can be enabled on |
| a per-board basis, by defining the following in the board's config file: |
| |
| #define CONFIG_FIT 1 |
| #define CONFIG_OF_LIBFDT 1 |
| |
| This can be optionally defined to give more verbose output: |
| |
| #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit dafaede8a46c7159310239e036c93e31c6374487 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Mar 20 23:20:31 2008 +0100 |
| |
| [new uImage] Disable debuging output in preparation for merge with master |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit fbe7a155027beacebaee9b32e1ada781fe924bca |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Mar 20 19:38:45 2008 +0100 |
| |
| [new uImage] Compilation and new uImage handling fixes for imxtract |
| |
| Fix imxtract command not being compiled-in despite CONFIG_CMD_XIMG being in |
| include/config_cmd_default.h. Fix few warnings and handling of new format |
| images. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 36cc8cbb3379d5166f882641123521735c469f92 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Mar 20 23:10:19 2008 +0100 |
| |
| [new uImage] Fix autoscr command used with new uImage format |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 43142e817f0597be412e7cbe19413f5532eafa5d |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Mar 20 23:10:19 2008 +0100 |
| |
| [new uImage] Fix *.its files location in documentation |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 81a0ac62ea29f8252d0a714709d0ecfdbba2a15e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Mar 20 22:01:38 2008 +0100 |
| |
| lwmon5 POST: remove unreachable code |
| |
| plus some coding style cleanup |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit b73a19e1609d0f705cbab8014ca17aefe89e4c76 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Thu Mar 20 17:56:04 2008 +0300 |
| |
| LWMON5: POST RTC fix |
| |
| Modify the RTC API to provide one a status for the time reported by |
| the rtc_get() function: |
| 0 - a reliable time is guaranteed, |
| < 0 - a reliable time isn't guaranteed (power fault, clock issues, |
| and so on). |
| |
| The RTC chip drivers are responsible for providing this info if the |
| corresponding chip supports such functionality. If not - always |
| report that the time is reliable. |
| |
| The POST RTC test was modified to detect the RTC faults utilizing |
| this new rtc_get() feature. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit a5cc5555ccee596908a7d8cf22a104f6b993bfd5 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Wed Mar 19 14:25:14 2008 +0100 |
| |
| TQM5200B: update MTD partition layout |
| |
| - insert partition for dtb blob to TQM5200B MTD layout |
| - set env variables dependent on the configured board |
| (TQM5200 or TQM5200B) |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit f0105727d132f56a21fa3ed8b162309cca6cac44 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 19 07:09:26 2008 +0100 |
| |
| CFI: Small cleanup for FLASH_SHOW_PROGRESS |
| |
| With this patch we don't need that many #ifdef's in the code. It moves |
| the subtraction into the macro and defines a NOP-macro when |
| CONFIG_FLASH_SHOW_PROGRESS is not defined. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| Acked-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 9a042e9ca512beaaa2cb450274313fc477141241 |
| Author: Jerry Van Baren <gvb.uboot@gmail.com> |
| Date: Sat Mar 8 13:48:01 2008 -0500 |
| |
| Flash programming progress countdown. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 5e339fd9ed539a7d7fec59cfc88f0857ab26a53f |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Mar 19 10:00:06 2008 +0100 |
| |
| [new uImage] Fix style issue spotted by Wolfgang Denk <wd@denx.org> |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 11abe45c48ec3485a6c1a5168ce8d79c3288adc1 |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Mon Feb 18 18:09:04 2008 +1100 |
| |
| libfdt: Remove no longer used code from fdt_node_offset_by_compatible() |
| |
| Since fdt_node_offset_by_compatible() was converted to the new |
| fdt_next_node() iterator, a chunk of initialization code became |
| redundant, but was not removed by oversight. This patch cleans it up. |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit d0ccb9b140b472039732de102fc14597eedb14df |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Mon Feb 18 18:06:31 2008 +1100 |
| |
| libfdt: Trivial cleanup for CHECK_HEADER) |
| |
| Currently the CHECK_HEADER() macro is defined local to fdt_ro.c. |
| However, there are a handful of functions (fdt_move, rw_check_header, |
| fdt_open_into) from other files which could also use it (currently |
| they open-code something more-or-less identical). Therefore, this |
| patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those |
| places. |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit fe30a354cdbb808b5f15366a935b151a4ccee74f |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 20 14:32:36 2008 -0600 |
| |
| Fix fdt boardsetup command parsing |
| |
| The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 804887e6001e2f00bea11431bf34d6d472512cda |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Feb 15 03:34:36 2008 -0600 |
| |
| Add sub-commands to fdt |
| |
| fdt header - Display header info |
| fdt bootcpu <id> - Set boot cpuid |
| fdt memory <addr> <size> - Add/Update memory node |
| fdt rsvmem print - Show current mem reserves |
| fdt rsvmem add <addr> <size> - Add a mem reserve |
| fdt rsvmem delete <index> - Delete a mem reserves |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f84d65f9b085ffbed464d1d58e8aaa8f5a2efc07 |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Thu Feb 14 16:50:34 2008 +1100 |
| |
| libfdt: Fix NOP handling bug in fdt_add_subnode_namelen() |
| |
| fdt_add_subnode_namelen() has a bug if asked to add a subnode to a |
| node which has NOP tags interspersed with its properties. In this |
| case fdt_add_subnode_namelen() will put the new subnode before the |
| first NOP tag, even if there are properties after it, which will |
| result in an invalid blob. |
| |
| This patch fixes the bug, and adds a testcase for it. |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit ae0b5908de3b9855f8931bc9b32c9fc4962df5a9 |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Tue Feb 12 11:58:31 2008 +1100 |
| |
| libfdt: Add and use a node iteration helper function. |
| |
| This patch adds an fdt_next_node() function which can be used to |
| iterate through nodes of the tree while keeping track of depth. This |
| function is used to simplify the iteration code in a lot of other |
| functions, and is also exported for use by library users. |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit 9eaeb07a7185d852c7aa10735ecd4e9edf24fb5d |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Fri Jan 11 14:55:05 2008 +1100 |
| |
| libfdt: Add fdt_set_name() function |
| |
| This patch adds an fdt_set_name() function to libfdt, mirroring |
| fdt_get_name(). This is a r/w function which alters the name of a |
| given device tree node. |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit 23e20aa6488e6c0622496549861bfdc74108debe |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Tue Mar 18 13:33:30 2008 +0100 |
| |
| lwmon5: Fix register test logic to match the specific GDC h/w. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 46bc0a938779aa1d664b847d36b08aa00f22e539 |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Tue Mar 18 13:27:57 2008 +0100 |
| |
| Fix backlight in the lwmon5 POST. |
| |
| Backlight was switched on even when temperature was too low. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 3d61018643a2cd38c145aa6dde53f3f5f1a0e9cf |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Wed Feb 6 18:48:36 2008 +0100 |
| |
| The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5). |
| |
| To enable this, alternative, configuration the U-Boot board configuration |
| file for lwmon5 includes the definitions of alternative addresses for header |
| (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR). |
| |
| The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set, |
| and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the |
| lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h). |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 0f009f781b5b88f25769e154ea4d42db13baf0c6 |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Mon Feb 4 17:11:53 2008 +0100 |
| |
| Add support for the lwmon5 board reset via GPIO58. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit f694e32f93565ec1fa8d0226c584d6b89e931ed9 |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Mon Feb 4 17:09:55 2008 +0100 |
| |
| Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit b428f6a8c65c5303e5f96db8d24f2f699d94a98c |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Mon Feb 4 14:11:03 2008 +0100 |
| |
| The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 8f15d4addd49c956412e1e3bfc764a0c8b1f3184 |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Mon Feb 4 14:10:42 2008 +0100 |
| |
| The patch adds new POST tests for the Lwmon5 board. These are: |
| |
| * External Watchdog test; |
| * dsPIC tests; |
| * FPGA test; |
| * GDC test; |
| * Sysmon tests. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit c2ed33efbfff5767bca236828e021c55fd547b6c |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Mon Feb 4 14:10:01 2008 +0100 |
| |
| Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| |
| commit 3a5d1e7f1309998791702b2a559e3126781746b9 |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Tue Mar 18 13:33:30 2008 +0100 |
| |
| lwmon5: Fix register test logic to match the specific GDC h/w. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 0f855a1f056a8c22116a2103a3900cbfb669df0b |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Tue Mar 18 13:27:57 2008 +0100 |
| |
| Fix backlight in the lwmon5 POST. |
| |
| Backlight was switcehd on even when temperature was too low. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 2d991958b1e420fbfe17b128bd26ade74be5efcc |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Wed Feb 6 18:48:36 2008 +0100 |
| |
| The patch introduces the alternative configuration of the log buffer for |
| the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), |
| the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., |
| PPC440EPX_GPT0_COMP5). |
| |
| To enable this, alternative, configuration the U-Boot board configuration |
| file for lwmon5 includes the definitions of alternative addresses for header |
| (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR). |
| |
| The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set, |
| and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the |
| lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h). |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit ff818b21b069f4bc9cb73373cc5a16014be101b7 |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Mon Feb 4 17:11:53 2008 +0100 |
| |
| Add support for the lwmon5 board reset via GPIO58. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 603f194e5ad81bb2ef42d6d8aaa74de175bcb411 |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Mon Feb 4 17:09:55 2008 +0100 |
| |
| Some fixes to dspic, fpga, and gdc post tests for lwmon5. |
| Disable external watch-dog for now. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit e262efe35742c1ad4b0966ff501efc26f34a0aec |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Mon Feb 4 14:11:03 2008 +0100 |
| |
| The patch introduces the CRITICAL feature of POST tests. If the test |
| marked as POST_CRITICAL fails then the alternative, post_critical, |
| boot-command is used. If this command is not defined then U-Boot |
| enters into interactive mode. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 65b20dcefc89618193fa51947968dada91e4c778 |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Mon Feb 4 14:10:42 2008 +0100 |
| |
| The patch adds new POST tests for the Lwmon5 board. |
| These are: |
| |
| * External Watchdog test; |
| * dsPIC tests; |
| * FPGA test; |
| * GDC test; |
| * Sysmon tests. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit 8dc3b2303d2b57c774b609ca0e7043ed8f9b88c1 |
| Author: Yuri Tikhonov <yur@pollux.denx.de> |
| Date: Mon Feb 4 14:10:01 2008 +0100 |
| |
| Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| |
| commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Mar 18 17:35:51 2008 +0100 |
| |
| HMI1001: fix compile problem. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 1f2a9970109cebf7446e0503b10b71f8673045ee |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 18 05:32:30 2008 -0500 |
| |
| Blackfin: BF537-stamp: drop board-specific flash driver for CFI |
| |
| The parallel flash on the BF537-STAMP is CFI compliant, so there is no need |
| for the board specific driver at all. Just use the common CFI driver. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 5b22163fef865af2b6bfb6b75f1b7bf443ce170c |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Feb 19 00:36:14 2008 -0500 |
| |
| Blackfin: add proper ELF markings to some assembly functions |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit cf675d3b2b9c3511c1d99bc8f8f38fd2f08bfcaf |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Feb 19 00:35:17 2008 -0500 |
| |
| Blackfin: new cplbinfo command for viewing cplb tables |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit aadb72503cd1602349a5fe53356d5f55ecc1b900 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 18 05:37:51 2008 -0500 |
| |
| Blackfin: update MAINTAINERS list |
| |
| Add maintainer information for the Blackfin boards. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit f7ce12cb65a30c6e152eecf26f0304b7d78cf39d |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 18 05:26:48 2008 -0500 |
| |
| Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU |
| |
| Stop tying things to the processor that should be tied to other defines and |
| change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build |
| system to select the -mcpu option. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 86a20fb920bd198105acf7b1191117f566d637ed |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sat Feb 16 07:40:36 2008 -0500 |
| |
| Blackfin: move bootldr command to common code |
| |
| This moves the Blackfin-common bootldr command out of the BF537-STAMP |
| specific board directory and into the common directory so that all Blackfin |
| boards may utilize it. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit decbe029b2a9d3333d02c433389b1c821eea96d7 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Mar 14 11:05:20 2008 +0100 |
| |
| mgcoge: update configuration |
| |
| Fix configuration for mgcoge board |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit c136724cda0219c49f1d4b346f00da29b14fdf14 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Mar 16 01:22:59 2008 +0100 |
| |
| drivers/rtc/Makefile: keep list sorted |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 9536dfcce03e7be4ccbceb47a08d9ba07ada362f |
| Author: Tor Krill <tor@excito.com> |
| Date: Sat Mar 15 15:40:26 2008 +0100 |
| |
| Add support for Intersil isl1208 RTC |
| |
| Signed-off-by: Tor Krill <tor@excito.com> |
| |
| commit 0210cff3d079d97b2156b13685ee8de368e68a1a |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Mar 15 17:36:41 2008 +0100 |
| |
| cramfs: Fix ifdef |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 0b8f2a27861a9fd06eb55a34f855ec9c5102aab4 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Mar 16 01:12:58 2008 +0100 |
| |
| Conding style cleanup |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 41712b4e8c95dff23354bcd620e1f9477160c190 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 5 12:31:53 2008 +0100 |
| |
| ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board |
| |
| This patch adds USB OHCI support to the Canyonlands board port. It also |
| enables EXT2 support. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2596f5b9d353ff3e4387a3325d05740f16958038 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 5 12:29:32 2008 +0100 |
| |
| usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver |
| |
| This patch adds CFG_OHCI_USE_NPS to the common USB-OHCI driver. This |
| way a board just needs to define this new option to enable the "force |
| NoPowerSwitching mode" instead of adding new CPU/architecture defines |
| to the USB source itself. |
| |
| This new option will be used first with the new AMCC 460EX Canyonlands |
| board port, which will be posted in a few days. |
| |
| This patch also fixes a small compilation problem when DEBUG is enabled. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 71665ebf88408ff2acb762af47989fd4365b321a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Mar 3 17:27:02 2008 +0100 |
| |
| ppc4xx: Add Canyonlands NAND booting support |
| |
| 460EX doesn't support a fixed bootstrap option to boot from 512 byte page |
| NAND devices. The only bootstrap option for NAND booting is option F for |
| 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap |
| EEPROM needs to be programmed accordingly. |
| |
| This patch adds basic NAND booting support for the AMCC Canyonlands aval |
| board and also adds support to the "bootstrap" command, to enable NAND |
| booting I2C setting. |
| |
| Tested with 512 byte page NAND device (32MByte) on Canyonlands. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c813f1f835a7edfdb929f2843b09db72cd5cd2f2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 11 16:53:00 2008 +0100 |
| |
| ppc4xx: Add AMCC Canyonlands support (460EX) (3/3) |
| |
| This patch adds support for the AMCC Canyonlands 460EX evaluation |
| board. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6983fe21f774a924d3adb263a270bc2f301f2aa2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 11 16:52:24 2008 +0100 |
| |
| ppc4xx: Add AMCC Canyonlands support (460EX) (2/3) |
| |
| This patch adds support for the AMCC Canyonlands 460EX evaluation |
| board. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8e1a3fe545bbcfceafe183344ebc9f1ad03819c1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 11 16:51:17 2008 +0100 |
| |
| ppc4xx: Add AMCC Canyonlands support (460EX) (1/3) |
| |
| This patch adds support for the AMCC Canyonlands 460EX evaluation |
| board. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 43c60992cdf72496e7eaaa3fbd37ebbe75835f69 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 11 15:11:43 2008 +0100 |
| |
| ppc4xx: Add basic support for AMCC 460EX/460GT (5/5) |
| |
| This patch adds basic support for the AMCC 460EX/460GT PPC's. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6f2eb3f3d8ea2dbb224d0da5a12038693bab9945 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 11 15:11:18 2008 +0100 |
| |
| ppc4xx: Add basic support for AMCC 460EX/460GT (4/5) |
| |
| This patch adds basic support for the AMCC 460EX/460GT PPC's. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 999ecd5aca381984d8ebbeb207ece82a1c275577 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 11 15:07:10 2008 +0100 |
| |
| ppc4xx: Add basic support for AMCC 460EX/460GT (3/5) |
| |
| This patch adds basic support for the AMCC 460EX/460GT PPC's. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2801b2d2a9906f206ab9ee8d0b6e746d2b7fe05a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 11 15:05:50 2008 +0100 |
| |
| ppc4xx: Add basic support for AMCC 460EX/460GT (2/5) |
| |
| This patch adds basic support for the AMCC 460EX/460GT PPC's. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8ac41e3e37c3080c6b1d9461d654161cfe2aa492 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 11 15:05:26 2008 +0100 |
| |
| ppc4xx: Add basic support for AMCC 460EX/460GT (1/5) |
| |
| This patch adds basic support for the AMCC 460EX/460GT PPC's. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 56e410178375d9f20be25fb24e180974f0ae120b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 19 22:07:57 2008 +0100 |
| |
| ppc4xx: interrupt.c reworked |
| |
| This patch is a rework of the 4xx interrupt handling done while |
| adding the 460EX/GT support. Interrupts are needed on 4xx for the |
| EMAC driver. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 84a999b6cdd0b02dc7de2cacc306eaa84afe2b46 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 19 22:01:57 2008 +0100 |
| |
| ppc4xx: program_tlb now uses 64bit physical addess |
| |
| This patch changes the physical addess parameter from 32bit to 64bit. |
| This is needed for 36bit 4xx platforms to access areas located |
| beyond the 4GB border, like SoC peripherals (EBC etc.). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c3307fa186af85771924c434997089b8104c0a46 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 19 21:58:25 2008 +0100 |
| |
| ppc4xx: miiphy.c reworked |
| |
| While adding the 460EX/GT support I reworked the 4xx miiphy code. It |
| badly neede some cleanup. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 88aff62df39c0756241ea9f9b5a7b3ade26cb82b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 19 16:21:49 2008 +0100 |
| |
| rtc: Add M41T62 support |
| |
| This patch add support for the STM M41T62 RTC. It is used and tested |
| on the AMCC Canyonlands 406EX platform. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 217d383e201adc7f2271145ae345ea5eae2b7170 |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Mon Feb 25 18:46:43 2008 +0100 |
| |
| ppc4xx: Add 405GPr based MCU25 board specific files |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 75a66dcdb383863ad33f0534cfc27b7a86947dad |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Mon Feb 25 18:46:42 2008 +0100 |
| |
| ppc4xx: Add 405GPr based MCU25 board config file |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit b05f35436b733a240559e77e46bed8439665ecc5 |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Mon Feb 25 18:46:41 2008 +0100 |
| |
| ppc4xx: Add 405GPr based MCU25 board. Global files |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 14c27b35ac812a71abce6e3e2f4129d5e9313660 |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Mon Feb 25 18:37:02 2008 +0100 |
| |
| ppc4xx: HCU4/5. remove obsolete hcu_flash.c |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit a079494853cc2bfeddb26673219db0b4b2b31566 |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Mon Feb 25 18:37:01 2008 +0100 |
| |
| ppc4xx: HCU4/5. Use FLASH_CFI_LEGACY |
| |
| Cleanup: Remove custom flash driver for 8 bit boot-eprom and replace it with |
| the FLASH_CFI_LEGACY et al. config options. |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit e4170e5a50c8110f792bc37472833ae669d69951 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 11 13:52:25 2008 +0100 |
| |
| ppc4xx: Fix comment in 405EX DDR2 init code |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 766529fccc860ecb9e955b4239dff69cd9e4ea09 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Mar 14 16:22:34 2008 +0100 |
| |
| Add MD5 support to the new uImage format |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 0ede0c383530a418cf98be9122371a86573cd0db |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Mar 14 16:22:34 2008 +0100 |
| |
| Add the MD5 algorithm |
| |
| MD5 supoprt is turned on by defining CONFIG_MD5, the digest can be then |
| calculated using the md5() function -- see include/md5.h for details. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Mar 14 16:04:54 2008 +0100 |
| |
| tools/setlocalversion: use a git-describe-ish format |
| |
| Change the automatic local version to have the form -nnnnn-gSHA1SUMID, |
| where 'nnnnn' is the number of commits since the last tag (i.e., |
| 1.3.2-rc3). This makes it much easier to recognize "newer" versions |
| and to see how much has been changed since the referenced tag. |
| |
| Stolen from Linux kernel's scripts/setlocalversio, see commit d882421f. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit c6dc21c84de0f159a1752c5ebd33cff843f63609 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Mar 13 14:32:03 2008 +0100 |
| |
| HMI1001: add support for MPC5200 Rev. B processors. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 90f13dce7a7a9a84d5730576c9a24d0dbb07cb3a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Mar 13 14:29:49 2008 +0100 |
| |
| TQM5200: remove dead code |
| |
| This board never used a MGT5100 processor. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit afe45c87e3c5d77bad76b1a57dccd20764d45b5d |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 12:14:15 2008 +0100 |
| |
| [new uImage] Fix build issue on ARM |
| |
| ARM platforms don't have a bd->bi_memsize so use bd->bi_dram[0].size instead. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 3310c549a73a949430bfda90876df7552a1dab0c |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 12:13:13 2008 +0100 |
| |
| [new uImage] Add new uImage format documentation and examples |
| |
| Create doc/uImage.FIT documentation directory with the following files: |
| - command_syntax_extensions.txt : extended command syntax description |
| - howto.txt : short usage howto |
| - source_file_format.txt : internal new uImage format description |
| |
| Add example image source files: |
| - kernel.its |
| - kernel_fdt.its |
| - multi.its |
| |
| Update README appropriately. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 1ec73761d2e247078f4520a265d463e8b73391a2 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:35:52 2008 +0100 |
| |
| [new uImage] Fix definition of common bootm_headers_t fields |
| |
| verify, autostart and lmb fields are used regardless of CONFIG_FIT |
| setting, move their definitions to common section. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 1d1cb4270edc6a99276834064069717f9782c491 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:35:51 2008 +0100 |
| |
| [new uImage] Fix build problems on trab board |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit f773bea8e11f4a11c388dcee956b2444203e6b65 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:35:46 2008 +0100 |
| |
| [new uImage] Add proper ramdisk/FDT handling when FIT configuration is used |
| |
| Save FIT configuration provied in the first bootm argument and use it |
| when to get ramdisk/FDT subimages when second and third (ramdisk/FDT) |
| arguments are not specified. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 2682ce8a4225f23d72bb7fed069e928dd39d34ae |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:33:01 2008 +0100 |
| |
| [new uImage] More verbose kernel image uncompress error message |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 1372cce2b9040fb640e5032b84e3a033a22d6ff0 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:33:01 2008 +0100 |
| |
| [new uImage] Use show_boot_progress() for new uImage format |
| |
| This patch allocates a set of show_boot_progress() IDs for new uImage format |
| and adds show_boot_progress() calls in new uImage format handling code. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit c28c4d193dbfb20b2dd3a5447640fd6de7fd0720 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:33:01 2008 +0100 |
| |
| [new uImage] Add new uImage fromat support to fpga command |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 09475f7527460e426c0e0628fc5b8f3754fbaa23 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:33:01 2008 +0100 |
| |
| [new uImage] Add new uImage format handling to other bootm related commands |
| |
| Updated commands: |
| |
| docboot - cmd_doc.c |
| fdcboot - cmd_fdc.c |
| diskboot - cmd_ide.c |
| nboot - cmd_nand.c |
| scsiboot - cmd_scsi.c |
| usbboot - cmd_usb.c |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 1b7897f28d49a80d78d760ec6f6f11dc0f914338 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:33:00 2008 +0100 |
| |
| [new uImage] Add new uImage format support to imgextract command |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 424c4abdd175d2c470510df8ce0e32d3f463ec16 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:33:00 2008 +0100 |
| |
| [new uImage] Add new uImage format support to autoscript routine |
| |
| autoscript() routine is updated to accept second argument, which |
| is only used for FIT images and provides a FIT subimage unit name. |
| |
| autoscript() routine callers must now pass two arguments. For |
| non-interactive use (like in cmd_load.c, cmd_net.c), new environment |
| variable 'autoscript_uname' is introduced and used as a FIT |
| subimage unit name source. |
| |
| autoscript command accepts extended syntax of the addr argument: |
| addr:<subimg_uname> |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit cd7c596e9f561dbbc17b717277438aee78cde14f |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:33:00 2008 +0100 |
| |
| [new uImage] Add new uImage format support to arch specific do_bootm_linux() routines |
| |
| This patch updates architecture specific implementations of |
| do_bootm_linux() adding new uImage format handling for |
| operations like get kernel entry point address, get kernel |
| image data start address. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 3dfe110149311425919e6d6a14b561b4207498f1 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:32:59 2008 +0100 |
| |
| [new uImage] Add node offsets for FIT images listed in struct bootm_headers |
| |
| This patch adds new node offset fields to struct bootm_headers |
| and updates bootm_headers processing code to make use of them. |
| Saved node offsets allow to avoid repeating fit_image_get_node() calls. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit bc8ed486b125452ba3bd8344f052f437329150c5 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:32:53 2008 +0100 |
| |
| [new uImage] ppc: Add new uImage format support to FDT handling routines |
| |
| Support for new (FIT) format uImages is added to powerpc specific |
| boot_get_fdt() routine which now recognizes, sanity checks FIT image |
| and is able to access data sections of the requested component image. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit a44a269a905f924b420020506a4d7d7eedcc0eaf |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:14:57 2008 +0100 |
| |
| [new uImage] Re-enable interrupts for non automatic booting |
| |
| Re-enable interrupts if we return from do_bootm_<os> and 'autostart' |
| environment variable is not set to 'yes'. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit d985c8498c4e47095820da97aa722381d39172c5 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:14:38 2008 +0100 |
| |
| [new uImage] Remove unnecessary arguments passed to ramdisk routines |
| |
| boot_get_ramdisk() and image_get_ramdisk() do not need all |
| cmdtp, flag, argc and argv arguments. Simplify routines definition. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit c87796483bc7c2900470dc747c367f602577608d |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:12:37 2008 +0100 |
| |
| [new uImage] Add new uImage format support for ramdisk handling |
| |
| This patch updates boot_get_ramdisk() routine adding format |
| verification and handling for new (FIT) uImages. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 6986a385671749ecb3f60cf99e9cbae8e47bb50e |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Mar 12 10:01:05 2008 +0100 |
| |
| [new uImage] Add new uImage format support for kernel booting |
| |
| New format uImages are recognized by the bootm command, |
| validity of specified kernel component image is checked and |
| its data section located and used for further processing |
| (uncompress, load, etc.) |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit e32fea6adb620ecf2bd70acf2dd37e53df9d1547 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue Mar 11 12:35:20 2008 +0100 |
| |
| [new uImage] Add new uImage format support for imls and iminfo commands |
| |
| imls and iminfo can now recognize nad print out contents of the new (FIT) |
| format uImages. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 9d25438fe7d70cf35a8a293ea5e392fefc672613 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Mar 11 12:34:47 2008 +0100 |
| |
| [new uImage] Add support for new uImage format to mkimage tool |
| |
| Support for the new uImage format (FIT) is added to mkimage tool. |
| Commandline syntax is appropriately extended: |
| |
| mkimage [-D dtc_options] -f fit-image.its fit-image |
| |
| mkimage (together with dtc) takes fit-image.its and referenced therein |
| binaries (like vmlinux.bin.gz) as inputs, and produces fit-image file -- the |
| final image that can be transferred to the target (e.g., via tftp) and then |
| booted using the bootm command in U-Boot. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit eb6175edd6c120d8b89678243e5a2be362ee8e40 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Mon Mar 10 17:53:49 2008 +0100 |
| |
| [new uImage] Make node unit names const in struct bootm_headers |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 5dfb52138688ccbf0146f62683fe6217b3ce1b05 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Fri Feb 29 21:24:06 2008 +0100 |
| |
| [new uImage] New uImage low-level API |
| |
| Add FDT-based functions for handling new format component images, |
| configurations, node operations, property get/set, etc. |
| |
| fit_ - routines handling global new format uImage operations |
| like get/set top level property, process all nodes, etc. |
| fit_image_ - routines handling component images subnodes |
| fit_conf_ - routines handling configurations node |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 30f1806f60978d707b0cff2d7bf89d141fc24290 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Mar 9 16:20:02 2008 +0100 |
| |
| Release v1.3.2 |
| |
| Update CHANGELOG for release. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5b464c289ba715d0979b6e1f94947bb8f1068d16 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Mar 9 14:52:11 2008 +0100 |
| |
| SCM: fix 'packed' attribute ignored for field of type 'can_msg_t' warnings |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit db695b78515ddb88a2d4f3357c120345efbf59ec |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Mar 9 10:44:01 2008 +0100 |
| |
| scb9328: Fix flash warning: type qualifiers ignored on function return type |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 2b3e7e61d6a72f16aee93f870bc6af67f30758c4 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Mar 9 10:50:41 2008 +0100 |
| |
| esd/common/fpga.c: fix indentation. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit cc3843e36453e2b8db65d7e56de938ba045016a0 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Mar 9 10:33:31 2008 +0100 |
| |
| common/kgdb.c: fix 'dereferencing type-punned pointer' warning |
| |
| and get rid of a couple of unneeded casts. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 8d4f4a838d7dc7cf4de17e3e9a67e2f222b6a1c8 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Mar 9 10:09:53 2008 +0100 |
| |
| esd/common/fpga.c: fix 'assignment of read-only location' error |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit c6fe4dabac066e8758345d249032768496983a3e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Mar 9 02:13:19 2008 +0100 |
| |
| Makefile: make build silently again. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 76babc86576f092573599334c85ec543fdbc6015 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Mar 9 02:07:49 2008 +0100 |
| |
| m501sk: Fix out of tree building |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 210ed2004e062fdd03f25ab4925998aa1bd08a07 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Mar 9 00:06:09 2008 +0100 |
| |
| ADS5121: fix out of tree build |
| |
| and simplify Makefile a bit. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 46cb5074a3f74de64ebd97dd0c4ec7eb3d768b93 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Mar 8 22:35:31 2008 +0100 |
| |
| Release v1.3.2 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 78a90f827df74520e939c794fc7413dace21c4db |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Mar 8 22:35:04 2008 +0100 |
| |
| Update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 58f3c57c6008b42e01f551d3be6efd88c14ac87f |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Mar 8 21:30:04 2008 +0100 |
| |
| esd: Fix warning: passing argument 1 of 'fpga_boot' discards qualifiers from pointer target type |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit d75469d48c05795144f4b8ba76addbb4920a7bba |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sat Mar 8 09:25:49 2008 +0900 |
| |
| net: rtl8169: Add processing when OWNbit did't enable in rtl_recv() |
| |
| When rtl_recv() of rtl8169 is called, OWNbit of status register |
| is not enable occasionally. |
| rtl_recv() doesn't work normally when the driver doesn't do |
| appropriate processing. |
| This patch fix this problem. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 82afabfeb8ae6a27c7b396011ea99f4712aa73fa |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Mar 7 08:15:28 2008 +0100 |
| |
| mgsuvd: update board configuration |
| |
| initialize the UPIOx controller. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit e492c90c26215e459aec0fdf0f8ef1fd204988f5 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Mar 7 08:13:41 2008 +0100 |
| |
| mgcoge: update board configuration |
| |
| add support for the config Flash. |
| initialize the UPIOx controller. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 270fe261b7f9292800b2b3d1bf19ae7cbc880258 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Mar 7 12:27:31 2008 -0600 |
| |
| mpc83xx: make dtb basename file references equal those of linux |
| |
| the dts file basenames were updated in linux - this helps avoid |
| inadvertently loading any old dtbs laying around. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit f30b6154f16f5ffa4a9f5bfca5e114d72b6ef675 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Feb 27 16:08:22 2008 -0600 |
| |
| net: uec_phy: actually increment the timeout counter |
| |
| allow u-boot to recover (and, e.g., switch to another interface) in the |
| case where a PHY does not report autonegotiation is complete within its |
| two second timeout value. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 772003e43957ee0c895abed7cd82cbe72820cbb8 |
| Author: Markus Brunner <super.firetwister@googlemail.com> |
| Date: Wed Mar 5 21:38:12 2008 +0100 |
| |
| fix taihu soft spi_read |
| |
| The taihu board used gpio_read_out_bit which reads the output register and not |
| the pin state. |
| |
| Signed-off-by: Markus Brunner <super.firetwister@gmail.com> |
| |
| commit fc84a8495ac750f6b4adae81f8c4f100f65b6340 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Mar 7 08:01:43 2008 +0100 |
| |
| ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variables |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit bd4458cb47abecabd406b1210457be96c69fc49d |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Mar 4 16:59:22 2008 +0800 |
| |
| 837xEMDS: Improve the system performance |
| |
| 1. Make the CSB bus pipeline depth as 4, and enable |
| the repeat mode; |
| 2. Raise the eTSEC emergency priority; |
| 3. Use the highest IP blocks clock. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit d8ab58b212481b1c57947ea21aa96c4ce800d0b4 |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Thu Mar 6 16:45:53 2008 +0100 |
| |
| Replace "run load; run update" with conditionalized "run load update". |
| |
| The latter version stops when "run load" fails for whatever reasons |
| rendering the combination *a lot* more secure. |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit 6bc113886d7d316df1a4e459bec8baf027518551 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 4 17:40:41 2008 +0100 |
| |
| net: Print error message upon net usage when no ethernet-interface is found |
| |
| This patch fixes a problem seen on PPC4xx boards, when no MAC address is |
| defined. Then no ethernet interface is available but a simple "tftp" |
| command will return without any error message which is quite confusing. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a30a549a3553032d809e0356306b62de0b125901 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Mar 4 10:03:03 2008 -0600 |
| |
| Remove erroneous or extra spd.h #includers. |
| |
| Many of the spd.h #includers don't need it, |
| and wanted to have spd_sdram() declared instead. |
| Since they didn't get that, some also had open |
| coded extern declarations of it instead or as well. |
| Fix it all up by using spd_sdram.h where needed. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a4475386cef14af3fd88f0518b688e755669486d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Mar 4 17:41:28 2008 +0100 |
| |
| PCS440EP: fix build problems (redundant #define) |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e85e2fa85ec09a6fac2846d1d881d8737e2bbda9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 4 17:39:25 2008 +0100 |
| |
| net: Print error message upon net usage when no ethernet-interface is found |
| |
| This patch fixes a problem seen on PPC4xx boards, when no MAC address is |
| defined. Then no ethernet interface is available but a simple "tftp" |
| command will return without any error message which is quite confusing. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 384faaafb999cae3ce447c93e28a0b7e2e5fef53 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Mar 4 17:38:50 2008 +0100 |
| |
| W7OLMC/W7OLMG: fix build problems (redundant #define) |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f9301e1cda296245ba052d7b08321199c3d0af9d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Mar 4 14:58:31 2008 +0100 |
| |
| Makefile: fix problem with out-of-tree builds introduced by 5013c09f |
| |
| Commit 5013c09f (Makefile: cleanup "clean" target) introduced a |
| problem for out-of-tree builds which caused "make clean" to fail. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit dfece9500556bed5d8244b1c15d973cec7c25bfe |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Mar 4 11:58:26 2008 +0100 |
| |
| examples/Makefile: build "hello_world" on 8xx, too. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 74eb0222594fd23aafdf168e60e872814eea8b62 |
| Author: Mike Nuss <mike@terascala.com> |
| Date: Mon Mar 3 15:27:05 2008 -0500 |
| |
| PPC4xx (Sequoia): Fix Ethernet "remote fault" problems |
| |
| Every now and then a Sequoia board (or equivalent hardware) had |
| problems connecting to a Gigabit capable network interface. |
| |
| There were differences in the PHY setup between Linux and U-Boot. |
| |
| This patch fixes the problem. Apparently "remote fault" is being set, |
| which signals to some devices (on the other end of the cable) that a |
| fault has occurred, while other devices ignore it. I believe the RF bit |
| was causing the issue, but I removed T4 also, to match up with Linux. |
| |
| Signed-off-by: Mike Nuss <mike@terascala.com> |
| |
| commit 491fb6dea9f52fdb9cb5996e8e978b9e9685179f |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Mon Mar 3 09:58:52 2008 -0600 |
| |
| fix QE firmware uploading limit |
| |
| Fix a typo in qe_upload_firmware() that prevented uploading firmware on |
| systems with more than one RISC core. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 42ba58e0c302b339a3c2faa6006a013c6f186b7a |
| Author: Bernhard Nemec <bnemec@ganssloser.com> |
| Date: Mon Mar 3 11:57:23 2008 +0000 |
| |
| Fix endianess problem in cramfs code (cramfs is always host-endian in Linux) |
| |
| Originally pointed out by Laurent Pinchart <laurent.pinchart@tbox.biz>, |
| see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/22846 |
| |
| Signed-off-by: Bernhard Nemec <bnemec <at> ganssloser.com> |
| |
| commit 84d0c2f1e39caff58bf765a7ab7c72da23c25ec8 |
| Author: Kim B. Heino <Kim.Heino@bluegiga.com> |
| Date: Mon Mar 3 10:39:13 2008 +0200 |
| |
| fix copy from ram to dataflash |
| |
| If I try to "cp.b <ram> <dataflash>", u-boot selects normal flash |
| routines instead of dataflash. This is because it checks "if source |
| address is not dataflash" instead of target address. |
| |
| Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com> |
| |
| commit 32bf3d143a888f8deacfdcc97e898f6c06d0aea4 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Mar 3 12:16:44 2008 +0100 |
| |
| Fix quoting problem (preboot setting) in many board config files. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5b0b2b6fc9fe22e3864c2a57316d91a2507ec215 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Mar 3 12:36:49 2008 +0100 |
| |
| ADS5121: Fix default environment. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 91c82076ae492bb1f9d9c47a481314631d32dc8e |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Mar 2 16:12:31 2008 +0100 |
| |
| Makefile: Fix missing unconfig and mkconfig use |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 8ce4e5c2c02cb7e8adddf7b651d3050d81ce4c1d |
| Author: michael <trimarchi@gandalf.sssup.it> |
| Date: Sun Mar 2 23:33:46 2008 +0100 |
| |
| Fix checking fat32 cluster size. |
| |
| This fixes the cluster size tests in the FAT32 file system. |
| The current implementation of VFAT support doesn't work if the |
| referred cluster has an offset > 16bit representation, causing |
| "fatload" and "fatls" commands etc. to fail. |
| |
| Signed-off-by: michael trimarchi <trimarchi@gandalf.sssup.it> |
| |
| commit 661bad63a076a96c39c64f136915f146725af92b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Mar 2 22:57:23 2008 +0100 |
| |
| Prepare v1.3.2-rc2 release candidate |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 76957cb3d621bf664311908e5962e151c633c285 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 1 12:11:40 2008 +0100 |
| |
| ppc4xx: EMAC: Fix 405EZ fifo size setup in EMAC_MR1 |
| |
| The 405EZ only supports 512 bytes of rx-/tx-fifo EMAC sizes. But |
| currently 4k/2k is configured. This patch fixes this issue. |
| |
| Thanks to Thomas Kindler <tkindler@lenord.de> for pointing this out. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 118978c8eb43803e2794233922df4249fa278b83 |
| Author: Woodruff, Richard <r-woodruff2@ti.com> |
| Date: Fri Feb 29 17:34:35 2008 -0600 |
| |
| Fix alignment error on ARM for modules |
| |
| Fix alignment fault on ARM when running modules. With out an explicit |
| linker file gcc4.2.1 will half word align __bss_start's value. The word |
| dereference will crash hello_world. |
| |
| signed-off-by Richard Woodruff <r-woodruff2@ti.com> |
| |
| commit ce1120dd703e6f12c59e4eba9962356a0300b832 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Fri Feb 29 17:45:31 2008 +0800 |
| |
| fs: Fix ext2 read issue |
| |
| The ext2 aligned process will corrupt the key |
| data struct, the patch fix this. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 5013c09f7a5675952a3ca88b6bc6c924e63af33e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Mar 2 22:45:33 2008 +0100 |
| |
| Makefile: cleanup "clean" target |
| |
| Make sure CDPATH settings cannot interfere. |
| Update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit ffda586fc1373243c9794babde69500f6293a8d8 |
| Author: Li Yang <leoli@freescale.com> |
| Date: Fri Feb 29 11:46:05 2008 +0800 |
| |
| add cscope build target |
| |
| Add cscope build target to generate cscope database for code browsing. |
| |
| Signed-off-by: Li Yang <leoli@freescale.com> |
| |
| commit f655adef65e4cf6b929054b049ee19ae9b5ccbe2 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Feb 27 15:06:39 2008 -0600 |
| |
| net: uec_phy: handle 88e1111 rev.B2 erratum 5.6 |
| |
| erratum 5.6 states the autoneg completion bit is functional only if the |
| autoneg bit is asserted. |
| |
| This fixes any secondarily-issued networking commands on non-gigabit |
| links on the mpc8360 mds board. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 5f91db7f582ca17b1f19f10189c025696f333d2e |
| Author: John Rigby <jrigby@freescale.com> |
| Date: Tue Feb 26 09:38:14 2008 -0700 |
| |
| MPC5121e ADS PCI support take 3 |
| |
| Adds PCI support for MPC5121 |
| |
| Tested with drivers/net/rtl8139.c |
| |
| Support is conditional since PCI on old silicon does not work. |
| |
| ads5121_PCI_config turns on PCI |
| |
| In this version, condition compilation of PCI code has been moved |
| from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as |
| suggested by Jean-Christophe PLAGNIOL-VILLARD |
| |
| Signed-off-by: John Rigby <jrigby@freescale.com> |
| |
| commit 44b4dbed4133f657705b7c5193209da9978243a7 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Mon Feb 25 23:53:07 2008 +0100 |
| |
| Fix warnings while compilation of post/drivers/memory.c |
| |
| Fix warnings while compilation with new gcc in eldk-4.2 |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 4fae35a53b3e958254d6574a1cc7e10811fc6726 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Mon Feb 25 20:54:04 2008 +0100 |
| |
| ppc4xx: Fix problem in 4xx_enet.c driver |
| |
| U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is |
| enabled. To reproduce the problem ensure that 'ethrotate' |
| environment variable isn't set to "no" and then run |
| "tftp 200000 not_existent_file". |
| This patch tries to fix the issue. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 60ec654c5eb80d0fe0c38a3bd42140215bc06484 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Mon Feb 25 20:04:20 2008 +0100 |
| |
| POST: Disable cache while SPR POST |
| |
| Currently (since commit b2e2142c) u-boot crashes on |
| sequoia board while SPR test if CONFIG_4xx_DCACHE is |
| enabled. This patch disables the cache while SPR test. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit c313b2c6c555e7d89ec59bd51c59ab164ad0105d |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Mon Feb 25 17:52:40 2008 +0100 |
| |
| TQM5200: use automatic fdt memory fixup (part 2) |
| |
| Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S, |
| TB5200 and TB5200_B to fixup the /memory node with the memory values |
| detected by U-Boot. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 44ceec253ea941b301abf4b079d52324def69d92 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Mon Feb 25 15:17:05 2008 +0100 |
| |
| TQM5200: use automatic fdt memory fixup |
| |
| Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S, |
| TB5200 and TB5200_B to fixup the /memory node with the memory values |
| detected by U-Boot. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit f3a329acb26017d8e10e9c93e1e726c2a5ac634a |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Mon Feb 25 13:27:52 2008 +0100 |
| |
| TQM5200: fix bug in SDRAM initialization code |
| |
| This patch fixes a bug in the SDRAM initialization code for the |
| TQM5200. The hi_addr bit is now set correctly. Without this patch |
| the hi_addr bit is always set to 1, if the second SDRAM bank is |
| not populated. |
| |
| For other MPC5200 boards a correspondig patch has already been applied |
| some time ago, see commit a63109281ad41b0fb489fdcb901171f76bcdbc2c. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| -- |
| Forget the first patch please. I confused flash with SDRAM in |
| the comment ... |
| |
| commit 217bf6b6a313d9ccb619a4dbc09f73f77cd48df1 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Feb 25 00:03:12 2008 +0100 |
| |
| mx1fs2/flash: Fix multiple compiler warnings |
| |
| "pointer targets in assignment differ in signedness" |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 5599c28cef55be42a8ca6fa8086b1a44e56a85d2 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Feb 25 00:03:11 2008 +0100 |
| |
| arm-imx: Fix register definitions |
| |
| Sync register definitions with linux |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit c9bcf75fecc58886af77d2a571cff2eab39eab6f |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Feb 25 00:03:10 2008 +0100 |
| |
| actua1/actua2/actua3: Fix multiple unused variable warnings |
| |
| - actua1: |
| actux1.c: In function 'checkboard': |
| actux1.c:92: warning: unused variable 'revision' |
| |
| - actua2: |
| actux2.c: In function 'checkboard': |
| actux2.c:100: warning: unused variable 's' |
| actux2.c:99: warning: unused variable 'revision' |
| actux2.c: In function 'reset_phy': |
| actux2.c:130: warning: unused variable 'i' |
| |
| - actua3: |
| actux3.c: In function 'checkboard': |
| actux3.c:114: warning: unused variable 'revision' |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit f8fa6368a6a0c02164da8e2f52f18d457c6977bd |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sun Feb 24 11:44:29 2008 +0900 |
| |
| Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets. |
| |
| The previous patch was lacking of i386, microblaze, nios and nios2. This |
| patch tries to fix them. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 05e07b1ea22844e946cfcf7d5e8a0199d18d2a95 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Fri Feb 29 22:22:46 2008 +0100 |
| |
| [new uImage] Fix FDT blob totalsize calculation in boot_relocate_fdt() |
| |
| Do not use global fdt blob pointer, calculate blob size from routine |
| argument blob pointer. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit d1cc52879c8966507dad9fb575481e6d3985e64e |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Tue Feb 12 00:58:31 2008 +1100 |
| |
| libfdt: Add and use a node iteration helper function. |
| |
| This patch adds an fdt_next_node() function which can be used to |
| iterate through nodes of the tree while keeping track of depth. This |
| function is used to simplify the iteration code in a lot of other |
| functions, and is also exported for use by library users. |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit 8cf30809a82902a471866d2f07725ce3b8a22291 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Feb 29 16:00:24 2008 +0100 |
| |
| [new uImage] Add libfdt support to mkimage |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit a6e530f00d31a8494a0422799b2b9a692a9c0eb9 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Feb 29 16:00:23 2008 +0100 |
| |
| [new uImage] Add sha1.o object to mkimage binary build |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit df6f1b895c997978f03afe04502ee76b7ba34ab9 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Fri Feb 29 16:00:06 2008 +0100 |
| |
| [new uImage] Fix component handling for legacy multi component images |
| |
| Use uint32_t when accessing size table in image_multi_count() and |
| image_multi_getimg() for multi component images. |
| |
| Add missing uimage_to_cpu() endianness conversion. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 570abb0ad120f6002bcaa3cf6f32bd4ca2e1b248 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Fri Feb 29 15:59:59 2008 +0100 |
| |
| [new uImage] Share common uImage code between mkimage and U-boot |
| |
| This patch adds the following common routines: |
| |
| 1) Dedicated mkimage print_header() is replaced with common |
| image_print_contents() |
| image_print_contents_noindent() |
| |
| 2) Common os/arch/type/comp fields name <--> id translation routines |
| genimg_get_os_name() |
| genimg_get_arch_name() |
| genimg_get_type_name() |
| genimg_get_comp_name() |
| genimg_get_os_id() |
| genimg_get_arch_id() |
| genimg_get_type_id() |
| genimg_get_comp_id() |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 9a4daad0a35eb5143037eea9f786a3e9d672bdd6 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Fri Feb 29 14:58:34 2008 +0100 |
| |
| [new uImage] Update naming convention for bootm/uImage related code |
| |
| This patch introduces the following prefix convention for the |
| image format handling and bootm related code: |
| |
| genimg_ - dual format shared code |
| image_ - legacy uImage format specific code |
| fit_ - new uImage format specific code |
| boot_ - booting process related code |
| |
| Related routines are renamed and a few pieces of code are moved around and |
| re-grouped. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 75fa002c47171b73fb4c1f2c2fe4d6391c136276 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 27 21:51:51 2008 -0600 |
| |
| [new uImage] Respect autostart setting in linux bootm |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit d3f2fa0d278467b2232e4eb2372f905c3febfbeb |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 27 21:51:50 2008 -0600 |
| |
| [new uImage] Provide ability to restrict region used for boot images |
| |
| Allow the user to set 'bootm_low' and 'bootm_size' env vars as a way |
| to restrict what memory range is used for bootm. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit e822d7fc4dd4755d4d0a22f05e33f33d1a0481da |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 27 21:51:49 2008 -0600 |
| |
| [new uImage] Use lmb for bootm allocations |
| |
| Convert generic ramdisk_high(), get_boot_cmdline(), get_boot_kbd() |
| functions over to using lmb for allocation of the ramdisk, command line |
| and kernel bd info. |
| |
| Convert PPC specific fdt_relocate() to use lmb for allocation of the device |
| tree. |
| |
| Provided a weak function that board code can call to do additional |
| lmb reserves if needed. |
| |
| Also introduce the concept of bootmap_base to specify the offset in |
| physical memory that the bootmap is located at. This is used for |
| allocations of the cmdline, kernel bd, and device tree as they should |
| be contained within bootmap_base and bootmap_base + CFG_BOOTMAPSZ. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f5614e7926863bf0225ec860d9b319741a9c4004 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 27 21:51:48 2008 -0600 |
| |
| [new uImage] Add autostart flag to bootm_headers structure |
| |
| The autostart env variable was dropped as part of the initial new uImage |
| cleanup. Add it back here so the arch specific code can decide if it |
| wants to really boot or not. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 4ed6552f715983bfc7d212c1199a1f796f1144ad |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 27 21:51:47 2008 -0600 |
| |
| [new uImage] Introduce lmb from linux kernel for memory mgmt of boot images |
| |
| Introduce the LMB lib used on PPC in the kernel as a clean way to manage |
| the memory spaces used by various boot images and structures. This code |
| will allow us to simplify the code in bootm and its support functions. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 4648c2e7a173b0d7f17bef4adaa0623090c9e904 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Feb 19 22:03:47 2008 -0600 |
| |
| [new uImage] ppc: Allow boards to specify effective amount of memory |
| |
| For historical reasons we limited the stack to 256M because some boards |
| could only map that much via BATS. However newer boards are capable of |
| mapping more memory (for example 85xx is capable of doing up to 2G). |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 274cea2bddbca10cdad7daa518951b75c44ef6bc |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 27 21:51:46 2008 -0600 |
| |
| [new uImage] rework error handling so common functions don't reset |
| |
| Changed image_get_ramdisk() to just return NULL on error and have |
| get_ramdisk() propogate that error to the caller. It's left to the |
| caller to call do_reset() if it wants to. |
| |
| Also moved calling do_reset() in get_fdt() and fdt_relocate() on ppc |
| to a common location. In the future we will change get_fdt() and |
| fdt_relocate() to return success/failure and not call do_reset() at all. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit d2bc095a639672def11d5d043b5688d0dbd692ec |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 27 21:51:45 2008 -0600 |
| |
| [new uImage] ppc: Re-order ramdisk/fdt handling sequence |
| |
| Doing the fdt before the ramdisk allows us to grow the fdt w/o concern |
| however it does mean we have to go in and fixup the initrd info since |
| we don't know where it will be. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 27953493ef025fb698d68c5dee39b36f01f4d530 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 27 21:51:44 2008 -0600 |
| |
| [new uImage] ppc: Determine if we are booting an OF style |
| |
| If we are bootin OF style than we can skip setting up some things |
| that are used for the old boot method. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit a6612bdfe7ef37b9787b66800cf02aaded05fbeb |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 27 21:51:43 2008 -0600 |
| |
| [new uImage] Don't pass kdb to ramdisk_high since we may not have one |
| |
| We don't actually need the kdb param as we are just using it to get |
| bd->bi_memsize which we can get from gd->bd->bi_memsize. Also, if we |
| boot via OF we might not actually fill out a kdb. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Acked-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 2b22fa4baee51e6b467c44ea1be0d1ecd86e8775 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 27 16:30:47 2008 -0600 |
| |
| 85xx: Don't icbi when unlocking the cache |
| |
| There is no reason to icbi when invalidating the temporary stack in |
| the d-cache. Its impossible on e500 to have the i-cache contain |
| any addresses in the temp stack and it can be problematic in generating |
| transactions on the bus to non-valid addresses. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 534ea6b6f86f8b75ef2ac061ef110a98f103d7d6 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Feb 27 15:50:50 2008 -0600 |
| |
| Fix source for ECM error IVPR |
| |
| The source vector for the ECM was being set to 2, |
| but that's what the source vector for DDR was being |
| set to. Change it to 1. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 21fae8b2b4e4e6e648796e07e20ab13e9cb18923 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Feb 27 14:29:58 2008 -0600 |
| |
| Invalidate INIT_RAM TLB mappings |
| |
| Commit 0db37dc... (and some others) changed the INIT_RAM TLB |
| mappings to be unguarded. This collided with an existing "bug" |
| where the mappings for the INIT_RAM were being kept around. |
| This meant that speculative loads to those addresses were |
| succeeding in the TLB, and going out to the bus, where they |
| were causing an exception (there's nothing at that address). The |
| Flash code was coincidentally causing such a speculative load. |
| Rather than go back to mapping the INIT RAM as guarded, we fix |
| it so that the entries for the INIT_RAM are invalidated. Thus |
| the speculative loads will fail in the TLB, and have no effect. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 347b7938d3e561eb215aa386c37fb5acb5a383c6 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 17 22:56:17 2008 +0100 |
| |
| sbc8548: Fix Revision reading and unused variable 'path' |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 495d162374c472f46454453553382ad0735dc725 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 17 22:56:16 2008 +0100 |
| |
| sbc8548: Fix cfi flash bank declaration |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 4efbe9dbb129f857f27856936112c8c02f016be6 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Feb 27 11:02:26 2008 +0100 |
| |
| [new uImage] Correct raw FDT blob handlig when CONFIG_FIT is disabled |
| |
| Dual format image code must properly handle all three FDT passing methods: |
| - raw FDT blob passed |
| - FDT blob embedded in the legacy uImage |
| - FDT blob embedded in the new uImage |
| |
| This patch enables proper raw FDT handling when no FIT imaeg support |
| is compiled in. This is a bit tricky as we must dected FIT format even |
| when FIT uImage handling is not enabled as both FIT uImages and raw FDT |
| blobs use tha same low level format (libfdt). |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit ff0734cff0fb5397ce2f4602f4f3e5ec9c8a36e8 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Feb 27 11:02:26 2008 +0100 |
| |
| [new uImage] POWERPC: Add image_get_fdt() routine |
| |
| FDT blob may be passed either: (1) raw (2) or embedded in the legacy uImage |
| (3) or embedded in the new uImage. For the (2) case embedding image must be |
| verified before we get FDT from it. This patch factors out legacy image |
| specific verification routine to the separate helper routine. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| Acked-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 1efd43601f90de21ec6c0ebb9880823e822927b1 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Feb 27 11:02:07 2008 +0100 |
| |
| [new uImage] Add image_get_kernel() routine |
| |
| Legacy image specific verification is factored out to a separate helper |
| routine to keep get_kernel() generic and simple. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| Acked-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 8a5ea3e6168fe6a2780eeaf257a3b19f30dec658 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Feb 27 11:01:04 2008 +0100 |
| |
| [new uImage] Move image verify flag to bootm_headers structure |
| |
| Do not pass image verification flag directly to related routines. |
| Simplify argument passing and move it to the bootm_header structure which |
| contains curently processed image specific data and is already being passed |
| on the argument list. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| Acked-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 823afe7cefe00dafefc6696c1cc7aa828c394234 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Feb 27 11:00:47 2008 +0100 |
| |
| [Makefile] Sort COBJS in lib_<arch> Makefiles |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 6f0f9dfc4ee880fbf400a2ebe14238181a6c3f91 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Feb 27 11:00:47 2008 +0100 |
| |
| [new uImage] Optimize gen_get_image() flow control |
| |
| When CONFIG_HAS_DATAFLASH is not defined gen_get_image() routine has nothing |
| to do, update its control flow to better reflect that simple case. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| Acked-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit d2ced9eb19ec74f4a359949dbe353427fa6d55ca |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Mon Feb 4 08:28:17 2008 +0100 |
| |
| [new uImage] POWERPC: Split get_fdt() into get and relocate routines |
| |
| PPC specific FDT blob handling code is divided into two separate routines: |
| |
| get_fdt() - find and verify a FDT blob (either raw or image embedded) |
| fdt_relocate() - move FDT blob to within BOOTMAP if needed |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| Acked-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 33fa5c0bfaf465de8ceb23fcd6b397f68b35a817 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Feb 25 13:13:37 2008 -0600 |
| |
| 86xx: Fix renamed GUR symbols in sbc8641d board. |
| |
| Back in commit a551cee99ad1d1da20fd23ad265de47448852f56 |
| (86xx: Fix GUR PCI config registers properly), we should have |
| changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL |
| symbols in the sbc8641d board as well. Fix this oversight. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 64cd594e623c39f73964d18787763e4533f791f7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Feb 25 16:50:48 2008 +0100 |
| |
| ppc4xx: Fix acadia_nand build problem |
| |
| Don't include testdram() on NAND-booting target acadia_nand. This saves |
| a few bytes and makes the target build clean again. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 14e099e698d41e8179d05c2b2dbcf704a236f748 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 24 23:03:12 2008 +0000 |
| |
| mx1fs2/flash: Fix multiple pointertargets in assignment differ in signedness |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 724902c8464e610642b3a170278b99710325888e |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 24 23:03:11 2008 +0000 |
| |
| arm-imx: Fix registers definition |
| |
| Sync registers definition with linux |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 4cd288b589ea1178947c6e364453c32b3dede6b7 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 24 23:03:10 2008 +0000 |
| |
| actua1/actua2/actua3: Fix multipleunused variable |
| |
| - actua1: |
| actux1.c: In function 'checkboard': |
| actux1.c:92: warning: unused variable 'revision' |
| |
| - actua2: |
| actux2.c: In function 'checkboard': |
| actux2.c:100: warning: unused variable 's' |
| actux2.c:99: warning: unused variable 'revision' |
| actux2.c: In function 'reset_phy': |
| actux2.c:130: warning: unused variable 'i' |
| |
| - actua3: |
| actux3.c: In function 'checkboard': |
| actux3.c:114: warning: unused variable 'revision' |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit d5934ad7756f038a393a9cfab76a4fe306d9d930 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Mon Feb 4 08:28:09 2008 +0100 |
| |
| [new uImage] Add dual format uImage support framework |
| |
| This patch adds framework for dual format images. Format detection is added |
| and the bootm controll flow is updated to include cases for new FIT format |
| uImages. |
| |
| When the legacy (image_header based) format is detected appropriate |
| legacy specific handling is invoked. For the new (FIT based) format uImages |
| dual boot framework has a minial support, that will only print out a |
| corresponding debug messages. Implementation of the FIT specific handling will |
| be added in following patches. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit b29661fc1151077776454288051bc9a488351ce8 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Feb 24 15:21:36 2008 +0100 |
| |
| Coding style cleanup. Prepare v1.3.2-rc2 release candidate |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 00b48a48424894daa589d166d73277830b1c6ac4 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Feb 23 12:15:56 2008 +0100 |
| |
| ENV: remove saveenv when CFG_ENV_IS_NOWHERE is selected |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit b075d74efb70ff68c49a2532f26b56d6703b69c1 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Feb 23 17:24:16 2008 +0900 |
| |
| Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets. |
| |
| ---------------------------------------------------------------- |
| Olaf Hering [Wed, 17 Oct 2007 06:27:13 +0000 (23:27 -0700)] |
| |
| Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on |
| 32bit targets. |
| |
| GCC can be made to warn about usage of long long types with ISO C90 |
| (-ansi), but only with -pedantic. You can write this in a way that even |
| then it doesn't cause warnings, namely by: |
| |
| #ifdef __GNUC__ |
| __extension__ typedef __signed__ long long __s64; |
| __extension__ typedef unsigned long long __u64; |
| #endif |
| |
| The __extension__ keyword in front of this switches off any pedantic |
| warnings for this expression. |
| |
| Signed-off-by: Olaf Hering <olh@suse.de> |
| Cc: <linux-arch@vger.kernel.org> |
| Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
| Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
| ---------------------------------------------------------------- |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 208acd112e6517b21fc30c420396902b103563ac |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Feb 23 17:07:57 2008 +0900 |
| |
| cpu/mcf52x2/config.mk: Make needlessly deffered expansions immediate. |
| |
| This will reduce the build time. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 495a0dde7fa1b14cdc15607d86503ec2bdcd02c4 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Feb 23 17:05:00 2008 +0900 |
| |
| cpu/ppc4xx/config.mk: Make a needlessly deffered expansion immediate. |
| |
| This will reduce the build time. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit e682ba399a1d76f09d8cc7af1e57066f1d360d91 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Feb 23 16:58:41 2008 +0900 |
| |
| cpu/mips/cofigl.mk: Make a needlessly deffered expansion immediate. |
| |
| This reduces the build time by ~10%. Here's the gth2_config example. |
| |
| BEFORE AFTER |
| real 0m31.441s 0m27.833s |
| user 0m24.766s 0m23.045s |
| sys 0m10.425s 0m7.468s |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 02409f8cf54c7cd91981f0dfec135dbf3858090c |
| Author: Marcel Moolenaar <marcelm@juniper.net> |
| Date: Fri Feb 22 10:48:07 2008 -0800 |
| |
| make define2mk.sed work on FreeBSD |
| |
| In the thread "[1.3.2-rc1] MPC8548CDS/MPC8555CDS configs fails to link", |
| the define2mk.sed script was identified as the source of the link |
| failure on FreeBSD. The problem is that sed(1) does not always support |
| the '+' operator. It isn't on FreeBSD. The attach patch implements the |
| equivalent, using the '*' operator instead and should work everywhere. |
| |
| Signed-off-by: Marcel Moolenaar <marcelm@juniper.net> |
| |
| commit e5084af8ded58453cd07ec1af8b0f29f34122bbc |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Fri Feb 22 17:21:32 2008 +0100 |
| |
| Replace deprecated "ramdisk" with "ramdisk_size" kernel parameter. |
| |
| The Linux commit fac8b209b1084bc85748bd54e13d00c1262b220f ("Remove |
| final traces of long-deprecated "ramdisk" kernel parm") makes these |
| changes neccessary. |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit d01b847c5cd070895c4ba178c85cd068a95cf7cd |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Thu Feb 21 13:58:16 2008 -0500 |
| |
| LM75 bug fix for negative temperatures |
| |
| When the LM75 temperature sensor measures a temperature below 0 C, the |
| current driver does not perform sign extension, so the result returned is |
| 256 C too high. This patch fixes the problem. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 5a910c224b13e413bda41922379add6d75c32da3 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Thu Feb 21 18:33:45 2008 +0100 |
| |
| IDS8247: update MAINTAINER entry. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 79eac2bfb591f2b028ec1735049dc91e4320de4a |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Thu Feb 21 18:31:15 2008 +0100 |
| |
| Fix device tree for mgsuvd board. |
| |
| Rename the "scc" node in "ethernet" for the mgsuvd board. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 2e721094a70a52206af2e1bf1208d9a7131f6dad |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Thu Feb 21 14:23:42 2008 +0100 |
| |
| lwmon5: enable hardware watchdog |
| |
| Some boards (e.g. lwmon5) may use rather small watchdog intervals, so |
| causing it to reboot the board if U-Boot does a long busy-wait with |
| udelay(). Thus, for these boards we have to restart WD more |
| frequently. |
| |
| This patch splits the busy-wait udelay() into smaller, predefined, |
| intervals, so that the watchdog timer may be resetted with the |
| configurable (CONFIG_WD_PERIOD) interval. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| |
| commit bc77881247ee6f95d7a9ebc499d26b96bae38c9d |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Thu Feb 21 12:52:29 2008 +0100 |
| |
| ppc4xx: Support for ATI Radeon 9200 card on sequoia |
| |
| Adds configuration option for ATI Radeon 9200 card |
| support to sequoia config file. If CONFIG_VIDEO |
| is enabled, TEXT_BASE should be changed to 0xFFF80000. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 5a9abcc317cf3c8a69559ff83081f4e5d719edb7 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Feb 18 08:18:07 2008 -0600 |
| |
| Remove duplicate defines for ARRAY_SIZE |
| |
| A few duplicate of the ARRAY_SIZE macro sneaked in since we put |
| the define in common.h. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 81d93e5c4b83d8b6dcee69de6f4a14ccf6f7114a |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Feb 18 08:09:37 2008 -0600 |
| |
| ppc: Allow boards to specify effective amount of memory |
| |
| For historical reasons we limited the stack to 256M because some boards |
| could only map that much via BATS. However newer boards are capable of |
| mapping more memory (for example 85xx is capable of doing up to 2G). |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 755c35f54ba7eb7687aa7935e04a02a01ef1b27b |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 18 05:24:13 2008 -0500 |
| |
| include autoconf.mk before any other .mk files |
| |
| This bumps the autoconf.mk include step above board/cpu/arch/etc... so that |
| those .mk files can have make if statements based on the current config. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 16fe77752eee099b9fb61ed73460e51cc94b37ba |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 18 05:10:07 2008 -0500 |
| |
| error check autoconf.mk generation |
| |
| If any of the steps for generating autoconf.mk fail currently, they go |
| unnoticed. To fix, we can simply add 'set -e' to the long list of commands. |
| This is simpler and more robust than placing '|| exit $$?' after every line. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 019895a8dee71a9f00da05c03e379f45d581b0fe |
| Author: Stefano Babic <sbabic@denx.de> |
| Date: Mon Feb 18 08:03:51 2008 +0100 |
| |
| Fix bug in dependency checking |
| |
| By adding VERSION_FILE to the PHONY targets the script |
| /tools/setlocalversion is always called and version_autogenerated.h |
| is replaced only if the script find a modified source file. |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| |
| commit 98ba144ccc912eee90dd42699f023c497ce774c6 |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Mon Feb 18 14:35:43 2008 +0900 |
| |
| Fix GPMC CS2 memory setup at apollon |
| |
| It disables the current map first |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit e845e07e1e6e64f40e35688439d3cdcf01cfff4f |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 17 23:52:46 2008 +0100 |
| |
| uli526x: Fix multiple differ in signedness and parentheses around comparison |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit beeccf7a5dc5415c202e0132a33c58fc316c2a62 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 17 16:58:04 2008 +0100 |
| |
| MIPS: Fix CFG_NO_FLASH support |
| |
| - Fix flash_init call when CFG_NO_FLASH is used |
| - Remove no more needed flash.c for qemu-mips |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit edfed1d91df2b2670a812ca9d1a1f9faae7dba47 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sat Feb 16 02:40:18 2008 -0500 |
| |
| easylogo: clean up some more and add -r (rgb) support |
| |
| Michael Hennerich added support for outputting an image in RGB format rather |
| than forcing YUYV all the time. This makes obvious sense if the display you |
| have takes RGB input rather than YUYV. |
| |
| Rather than hack in support for options, I've converted it to use getopt and |
| cleaned up the argument parsing in the process. |
| |
| Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit f65c98129ccada3f7caf97d80395a95b84e911de |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Sat Feb 16 02:12:37 2008 -0500 |
| |
| Makefile: add target for $(LDSCRIPT) |
| |
| If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds), |
| then change into the board directory and try and create it. This allows you |
| to generate the linker script on the fly based upon board defines (like the |
| Blackfin boards do). |
| |
| There should be no regressions due to this change as the normal case is to |
| already have a u-boot.lds file. If that's the case, then there's nothing to |
| generate, and so make will always exit. The fix here is that if the linker |
| script does not exist, the implicit rules take over and attempt to guess how |
| to generate the file. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 5583cbf736474ef754e128a54fb78632f57b48fd |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Feb 21 17:27:49 2008 +0100 |
| |
| [new uImage] Fix erroneous use of image_get_magic() in fdc/usb cmds |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 2242f5369822bc7780db95c47985bb408ea9157b |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Feb 21 17:27:41 2008 +0100 |
| |
| [new uImage] Rename and move print_image_hdr() routine |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit f50433d670ec2ee9e96abac67cdc6e5e061a810d |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Feb 21 17:20:20 2008 +0100 |
| |
| [new uImage] Add fit_parse_conf() and fit_parse_subimage() routines |
| |
| Introducing routines for parsing new uImage format bootm arguments: |
| [<addr>]#<conf> - configuration specification |
| [<addr>]:<subimg> - subimage specification |
| |
| New format images can contain multiple subimages of the same type. For example |
| a single new format image file can contain three kernels, two ramdisks and a |
| couple of FDT blobs. Subimage and configuration specifications are extensions |
| to bootm (and other image-related commands) arguments' syntax that allow to |
| specify which particular subimage should be operated on. |
| |
| Subimage specification is used to denote a particular subimage. Configurations |
| are a bit more complex -- they are used to define a particualr booting setup, |
| for example a (kernel, fdt blob) pair, or a (kernel, ramdisk, fdt blob) tuple, |
| etc. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit fff888a1997ff7de9b29e24050fc4a0fd403ba16 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Feb 21 17:20:19 2008 +0100 |
| |
| [new uImage] Add gen_get_image() routine |
| |
| This routine assures that image (whether legacy or FIT) is not |
| in a special dataflash storage. |
| |
| If image address is a dataflash address image is moved to system RAM. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 75d3e8fbd93c14d9929d024c75af2d742c76db70 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Feb 21 17:20:18 2008 +0100 |
| |
| [new uImage] Pull in libfdt if CONFIG_FIT is enabled |
| |
| New uImage format (Flattened Image Tree) requires libfdt |
| functionality, print out error message if CONFIG_OF_LIBFDT |
| is not defined. |
| |
| New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT). |
| This commit turns it on by default. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 1ba639da5604a64b3ed884a2cbb1c5414a9fa728 |
| Author: Michael Schwingen <michael@schwingen.org> |
| Date: Mon Feb 18 23:16:35 2008 +0100 |
| |
| CFI: Do not use uninitialized cmd_reset |
| |
| Do not use uninitialized cmd_reset; issue both AMD and Intel reset |
| commands instead |
| |
| From a short test, it looks like AMD-style flash roms treat *any* unknown |
| command write as a reset, at least when in CFI Query mode, so issuing the |
| Intel reset command to AMD-style flashs seems safe (from the small sample I |
| have), plus the 3-cycle magic sequence should kick the state machine into |
| the right state even without a reset command. Since the AMD-style flashs |
| require the unlock sequence for real operation, I chose to try the AMD reset |
| command first, so that Intel flashs do no see an invalid command prior to |
| the CFI query. |
| |
| I have tested the patch on AM29LV320-style flashs from Fujitsu and Macronix, |
| plus Intel StrataFlash. |
| |
| Signed-off-by: Michael Schwingen <michael@schwingen.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e7a85f26830c9f2e78506421c2d519a2965bc7a1 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Thu Feb 21 11:56:44 2008 +0100 |
| |
| API: Add (c) and licensing notice to the public API header. |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit 928d1d77f8623c120d8763e20e1ca58df9c5c4c6 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Thu Feb 21 11:06:07 2008 +0100 |
| |
| Fix CPU POST test failure |
| |
| The CPU POST test code (run from cpu_post_exec_31()) doesn't follow the |
| ABI carefully, at least the CR3, CR4, and CR5 fields of CR are clobbered |
| by it. The gcc-4.2 with its more aggressive optimization exposes this fact. |
| This patch just saves the CR value before running the test code, so allowing |
| it to do anything it wants with CR. |
| |
| Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> |
| Acked-by: Yuri Tikhonov <yur@emcraft.com> |
| -- |
| |
| commit d5908b093955415f3d340706378b991f911af671 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Feb 20 15:26:51 2008 -0600 |
| |
| 8610HPCD: Document the flashbank selection switches. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a551cee99ad1d1da20fd23ad265de47448852f56 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Feb 20 14:22:26 2008 -0600 |
| |
| 86xx: Fix GUR PCI config registers properly. |
| |
| Back in commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 where |
| I tried to "8610HPCD: Fix typos in two PCI setup registers", I |
| botched it due to not realizing that 8610 and 8641 had different |
| Global Utility Register defintions, one of which was like 85xx, |
| and the other wasn't. Correct this problem by introducing two |
| symbols, one for each 86xx SoC, but neither of which is named |
| anything like 85xx. |
| |
| My bad. Lovely Wednesday with git bisect. You know. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit cb06eb961bdffc8728b38c242473d802e83ab2b4 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Feb 20 12:24:11 2008 -0600 |
| |
| 8610HPCD: Don't use VIDEO/CFB_CONSOLE by default. |
| |
| Without an actual supported video card hooked up, enabling |
| the CONFIG_VIDEO by default just makes it look broken by |
| routing all console output to the video card. Don't. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4d264eff4312f230776b913edade7ceb75f1b1e0 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Jan 30 15:08:15 2008 -0600 |
| |
| ColdFire: Fix missing code flash size for M5485EVB |
| |
| Signed-off-by: James Mahan <kmahan@freescale.com> |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit c54f9263e4e11e34b1e70c160bc467ef1d8ec59d |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Jan 30 15:04:42 2008 -0600 |
| |
| ColdFire: Fix 5282 and 5271 interrupt mask bit |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Feb 19 12:31:08 2008 -0600 |
| |
| 8610HPCD: Fix typos in two PCI setup registers. |
| |
| The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA |
| were erroneously present as 85xx names and values, leftover from |
| the clone wars. Fix this by removing the 85xx cruft from the |
| 86xx codebase. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 13f5433f700d4da9f6fdf2a4bb80310133a7c170 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Feb 18 14:01:56 2008 -0600 |
| |
| 86xx: Convert sbc8641d to use libfdt. |
| |
| This is the proper fix for a missing closing brace in the function |
| ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com. |
| The ft_cpu_setup() function in mpc8641hpcn.c should have been |
| removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE, |
| but was missed. Only, the sbc8641d was nominally still using it. |
| It all got ripped out, and the funcality that was in ft_board_setup() |
| was refactored to remove the CPU portions into the new file |
| cpu/mpc86xx/fdt.c instead. Make sbc8641d use this now. |
| |
| Based loosely on an original patch from joe.hamman@embeddedspecialties.com |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 04efddc87c50c84f85dad5c331c634a6ce830a83 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 17 23:35:31 2008 +0100 |
| |
| mpc86xx: Fix unused variable 'config' and 'immap' |
| |
| and remove useless CONFIG_DDR_INTERLEAVE |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 83d1b3876695c4f21faff2b731d9ef83f38ed208 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 17 23:03:36 2008 +0100 |
| |
| mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_law' |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit b6f29c84c208a091f95a10cbc9852d729659ba20 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 17 14:15:31 2008 +0100 |
| |
| s3c24x0: Fix unused variable 'i' in function 'serial_init_dev' |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 0937b8d869fdb42d6ad4fe312958639bd62c973f |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 17 14:15:32 2008 +0100 |
| |
| pxa: fix assignment from incompatible pointer type |
| |
| fix mmc_bread function prototype |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 64d792063fff90b8118179b092feee09fe5cae13 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 17 14:15:30 2008 +0100 |
| |
| at91cap9adk: fix implicit declaration of function 'eth_init' |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 375c4353db8f900f7ec772e26fab116ec00f7d3a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Feb 17 15:43:44 2008 +0100 |
| |
| Remove files added by mistake, update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit b738654d3c84a30f2bfd9a8d7652ff20807c890c |
| Author: Mike Nuss <mike@terascala.com> |
| Date: Wed Feb 6 11:10:11 2008 -0500 |
| |
| PPC440EPx: Optionally enable second I2C bus |
| |
| The option CONFIG_I2C_MULTI_BUS does not have any effect on Sequoia, the |
| PPC440EPx reference platform, because IIC1 is never enabled. Add Sequoia board |
| code to turn on IIC1 if CONFIG_I2C_MULTI_BUS is selected. |
| |
| Signed-off-by: Mike Nuss <mike@terascala.com> |
| Cc: Stefan Roese <sr@denx.de> |
| |
| commit ef5b4f221c22d05770878513951745f236b5b43f |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Tue Feb 5 10:26:44 2008 +0100 |
| |
| ppc4xx: HCU4/5. Cleanup configs |
| |
| - hcu4.h: Removed define of CONFIG_PPC405GPr |
| - Corrected phy addresses |
| - Fix boot variables |
| - Respect line length of 80 chars |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 74973126d1be63ac75bdc192f46234dca3a7c421 |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Tue Feb 5 11:31:28 2008 +0100 |
| |
| ppc4xx: HCU4/5. Cleanups |
| |
| - Fix some coding style violations. |
| - Use in/out_u16/32 where appropriate. |
| - Use register names from ppc405.h. |
| - Fix trace useage for Lauterbach. |
| - Remove obsolete generation HCU2. |
| - Renamed fixed_hcu4_sdram to init_ppc405_sdram. |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 8cc10d06b833ed917a19ad358c8ebbed8bc19555 |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Tue Feb 5 10:26:41 2008 +0100 |
| |
| ppc4xx: PPC405GPr fix missing register definitions |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 214398d9cb22268d9d4f7563359edca0f78297a2 |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Fri Jan 18 21:49:05 2008 -0500 |
| |
| ppc4xx: Beautify configuration files for Sequoia and Korat boards |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 30c6a241e88499f536e86d325759e29ba00ff67f |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Fri Feb 15 20:09:01 2008 +0100 |
| |
| Wipe out assembler warnings while compiling x86 biosemu |
| |
| This patch tries to get rid of some assembler warnings about |
| changed .got2 section type while compiling x86 bios emulator |
| code. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 67a4389e39ad853d65b72e2b7cad15c7e8291147 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Feb 15 00:57:09 2008 +0100 |
| |
| Prepare v1.3.2-rc1 release candidate |
| |
| commit f33e9653c9c09868995d788511d573771c209fe5 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Fri Feb 15 00:13:20 2008 +0100 |
| |
| Fix compile warning on lib_ppc/board.c |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit e5c6f9f8bec4dff9603419161e3a15cc8ad5d5f4 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Thu Feb 14 18:22:04 2008 +0100 |
| |
| Add Radeon Mobility 9200 pci device id to the radeon driver |
| |
| This patch extends PCI device id table of the |
| radeon driver so that the driver will also support |
| Radeon Mobility 9200 (M9+) based boards. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 1b8607e1f7143548c6062c28371449ec69588c00 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Thu Feb 14 18:19:50 2008 +0100 |
| |
| Extend ATI Radeon driver to support more video modes |
| |
| Adds ATI Radeon 9200 support for 1280x1024, 1024x768, |
| 800x600, 640x480 at 24, 16 and 8 bpp. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 4124382de029d361162a4b8cecc773eb8f26e2a8 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Feb 10 17:05:20 2008 +0100 |
| |
| xsengine: fix typo and few coding style |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 6f4abee789b6d9be3ec4b97ad48f509355559e9e |
| Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| Date: Fri Feb 8 21:25:58 2008 +0100 |
| |
| Fix wrong memory limit calculation in memory-test |
| |
| If the length of the memory address range passed to the "mtest" command is |
| not of the form 2^x - 1, not all address lines are tested. This bug is |
| inherited from the original software at |
| http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix |
| this. |
| |
| Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| |
| commit 7e30f5eac7f07082a7ca77b7d91b944a8d0af6db |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Feb 15 00:11:39 2008 +0100 |
| |
| Coding STyle cleanup. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f6921e3dc331293c873ec4d109fd5517a42a90b3 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Tue Feb 5 13:30:43 2008 +0900 |
| |
| sh: Fix register address of SH7722 |
| |
| The address of SH7722 is wrong by old document. |
| This patch fixes this problem. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 0ec7a061fb1c277f6afd73d61dd71bd21e7ef7b2 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 17:44:23 2008 -0500 |
| |
| only update version header as needed |
| |
| Constantly rebuilding the version header will force useless relinking, so we |
| simply need to compare the new header with the existing one before updating |
| it. |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 208447f8e953f347425eb92c8e28d59e6d911363 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Jan 28 05:56:19 2008 -0500 |
| |
| Do not specify a CROSS_COMPILE default when executing size |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 1f780aa6f17a5d79791d69ec1d2f66d76ac45d8e |
| Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| Date: Wed Feb 13 11:19:19 2008 +0100 |
| |
| Fix return value of mtest when CFG_ALT_MEMTEST set |
| |
| Fix a missing return statement from a non-void function. |
| |
| Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| |
| commit 943afa229cf5bf70ef917c7eb6bd0db59a1ba602 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Wed Jan 9 14:35:26 2008 -0600 |
| |
| 85xx, 86xx: Determine I2C clock frequencies and store in global_data |
| |
| Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx. |
| |
| Update the get_clocks() function in 85xx and 86xx to determine the I2C |
| clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit b931b3a9c3bdfaaeaa71e57a6026eec726005b08 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Feb 14 23:18:01 2008 +0100 |
| |
| TQM834x: clean up configuration |
| |
| Get board name consistent with Linux and elsewhere; |
| get rid of local network definitions etc. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 38cc09c55b1d7f233789052c6fc462e5377669a9 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Thu Feb 14 08:02:12 2008 +0100 |
| |
| TFTP: fix search of ':' in BootFile |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 0bc9efada170096c6b273f19165e32936d330d80 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Feb 14 22:46:55 2008 +0100 |
| |
| Coding style cleanup; update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e7670f6c1e52ae6d2a43ff75a8bcfa7a5c86e47b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Feb 14 22:43:22 2008 +0100 |
| |
| PPC: Use r2 instead of r29 as global data pointer |
| |
| R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc |
| will refuse to use load/store multiple insns; instead, it issues a |
| list of simple load/store instructions upon function entry and exit, |
| resulting in bigger code size, which in turn makes the build for a |
| few boards fail. |
| |
| Use r2 instead. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 3c234efa693bc59906c2be55c7918ecbb55392ea |
| Author: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> |
| Date: Wed Jan 30 09:08:49 2008 +0100 |
| |
| ARM: make the machid configurable via the environment |
| |
| If the variable "machid" exists, let do_bootm_linux use that instead |
| of bd->bi_arch_number. |
| |
| Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> |
| |
| commit dd24058407c5add45cc60aec6c757ddc1a17e1b0 |
| Author: Vlad Lungu <vlad@comsys.ro> |
| Date: Wed Jan 23 16:34:46 2008 +0200 |
| |
| Use #ifdef CONFIG_FSLDMAFEC |
| |
| MCD_tasks.c lacks [subject] so compilation of mips targets (and more, probably) |
| fails |
| |
| Signed-off-by: Vlad Lungu <vlad@comsys.ro> |
| |
| commit 26c7bab81e08dc7bd696c48f753428a829629bd8 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Jan 19 10:25:59 2008 +0900 |
| |
| common/miiphyutil.c: Cleanup MII_DEBUG and debug() |
| |
| Current MII_DEBUG is confusing in two ways. One is useless define-then- |
| undef at the top of the file. The other is there is only one debug() in |
| this file, and that doesn't seem worthwhile to bother having MII_DEBUG. |
| While there are many useful printf()/puts() debug codes, but they are for |
| DEBUG, not for MII_DEBUG. |
| |
| This patch tries to put them all together into MII_DEBUG and debug(). |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 751b9b5189f3274b03c809172631316d6b002c82 |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Thu Jan 17 16:43:25 2008 +0900 |
| |
| OneNAND Initial Program Loader (IPL) support |
| |
| This patch enables the OneNAND boot within U-Boot. |
| Before this work, we used another OneNAND IPL called X-Loader based |
| on open source. With this work, we can build the oneboot.bin image |
| without other program. |
| |
| The build sequence is simple. |
| First, it compiles the u-boot.bin |
| Second, it compiles OneNAND IPL |
| Finally, it becomes the oneboot.bin from OneNAND IPL and u-boot.bin |
| The mechanism is similar with NAND boot except it boots from itself. |
| |
| Another thing is that you can only use the OneNAND IPL only to work |
| other bootloader such as RedBoot and so on. |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit 21f6f9636f0e978397548751347425fbf8d42bb3 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Jan 16 13:06:59 2008 -0600 |
| |
| Fix CONFIG_MMC usage in fat code |
| |
| A #if statement in fat.c depended on CONFIG_MMC, instead of |
| defined(CONFIG_MMC). This meant CONFIG_MMC needed to be defined |
| as "1" rather than just defined. Now it's better. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit f57d7d364ce189e39b0a64338d2f8012c074a2bd |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Tue Jan 15 12:52:31 2008 +0100 |
| |
| ppc: Refactor cache routines, so there is only one common set. |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit 3f2ac8f928c76cbd2374437b2d079f8b4324aaba |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jan 23 15:55:02 2008 -0600 |
| |
| 86xx: Fix compilation warning in sys_eprom.c |
| |
| sys_eeprom.c:82:9: warning: unknown escape sequence '\/' |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 65230107025733e89e28fd5e5cfd916d4953c28a |
| Author: Haavard Skinnemoen <hskinnemoen at> |
| Date: Fri Feb 22 11:40:50 2008 +0000 |
| |
| Move AT91RM9200DK board support under board/atmel |
| |
| We already have a vendor subdir for Atmel, so we should use it. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com> |
| |
| commit 6d0943a6be99977d6d853d51749e9963d68eb192 |
| Author: Andreas Engel <andreas.engel@ericsson.com> |
| Date: Mon Jan 14 09:06:52 2008 +0000 |
| |
| ARM: cleanup duplicated exception handlingcode |
| |
| Move duplicated exception handling code into lib_arm. |
| |
| Signed-off-by: Andreas Engel <andreas.engel@ericsson.com> |
| |
| commit ea8d989f4ef8203e1c0291e62435a8c62e3cfb29 |
| Author: Timo Tuunainen <timo.tuunainen@sysart.fi> |
| Date: Fri Feb 1 10:09:03 2008 +0000 |
| |
| Support for Artila M-501 starter kit |
| |
| Kimmo Leppala / Sysart and |
| Timo Tuunainen / Sysart |
| |
| commit 9604b6e53ddae4fe00a488cbcd6b0e6cb344bccc |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Mon Feb 11 10:50:19 2008 +0000 |
| |
| AT91CAP9 support |
| |
| --------------------------------- |
| |
| read_dataflash() takes a signed char pointer as a parameter. Silence a |
| few warnings dues to incorrect parameter types in env_dataflash.c. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 64e8a06af68cda174a8a06d0a61fce5e5bb189d7 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu Feb 7 09:42:57 2008 +0000 |
| |
| AT91CAP9 support : move board files to Atmel vendor directory. |
| |
| AT91CAP9 support : move at91cap9adk board files to Atmel vendor directory. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 7263ef191b87da94768f762c7093bedeb70db98f |
| Author: Stelian Pop <stelian at> |
| Date: Thu Jan 3 21:15:56 2008 +0000 |
| |
| AT91CAP9 support : MACB changes |
| |
| Signed-off-by: Stelian Pop <stelian <at> popies.net> |
| Acked-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com> |
| |
| commit 6afcabf11d7321850f4feaadfee841488ace54c5 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu Feb 7 16:37:54 2008 +0000 |
| |
| AT91CAP9 support : board/ files |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit fefb6c10928caa9e71335cad64dcb65c83fce8ab |
| Author: Stelian Pop <stelian at> |
| Date: Wed Jan 30 21:15:54 2008 +0000 |
| |
| AT91CAP9 support : cpu/ files |
| |
| Signed-off-by: Stelian Pop <stelian <at> popies.net> |
| |
| commit fa506a926cec348805143576c941f8e61b333cc0 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Thu Jan 31 21:15:53 2008 +0000 |
| |
| AT91CAP9 support : include/ files |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit 20b197c6f2799af399a68f96a1aff543a75621b8 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Sun Jan 20 19:49:21 2008 +0000 |
| |
| AT91CAP9 support : build integration |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit d49fe4bed5b69ec910909d1bd62da23ecd8801fd |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Sun Jan 20 21:07:00 2008 +0000 |
| |
| Improve DataFlash CS definition. |
| |
| Use a structure instead of the error prone unnamed array to |
| define the possible dataflash banks. |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit a6cdd21b56014208706238712a853a9e9a0a2290 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Sat Jan 19 21:09:35 2008 +0000 |
| |
| Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on |
| |
| Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on. |
| |
| cpu/arm926ejs/start.o: In function `cpu_init_crit': |
| .../cpu/arm926ejs/start.S:227: undefined reference to `lowlevel_init' |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit ea686f52e45b3df2938866d3f5a98bb2556dfe2b |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Fri Feb 1 16:50:24 2008 +0000 |
| |
| Fix timer overflow in DaVinci |
| Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| |
| commit f4e7cbfcb0fcbc325a2bcfea7e00e3dd37f93846 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Fri Feb 1 16:49:08 2008 +0000 |
| |
| Update board NetStar |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| |
| commit b7f6193e76651e1fd606e46eb11915b53cb6618b |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Tue Feb 5 10:26:42 2008 +0100 |
| |
| ppc4xx: HCU4/5. Fix make O=../xx |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 29e3500cbc43c89eff6e720ca83e375deeecd9b3 |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Tue Jan 22 08:51:59 2008 -0500 |
| |
| ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD code |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit fe891ecf4d187e9d11dde869ed4623af52b54451 |
| Author: Hiroshi Ito <ito@mlb.co.jp> |
| Date: Thu Jan 31 18:35:04 2008 +0900 |
| |
| NFS Timeout with large files. |
| |
| Retry to send NFS packet before reaching timeout. |
| |
| Signed-off-by: Hiroshi Ito <ito@mlb.co.jp> |
| |
| commit 88f72527f5b89c0905ad5c36cc2ef8d29dd6bbf0 |
| Author: Johannes Stezenbach <js@sig21.net> |
| Date: Tue Jan 29 00:11:25 2008 +0100 |
| |
| Add dependencies to avoid race conditions with parallel make. |
| |
| Signed-off-by: Johannes Stezenbach <js@sig21.net> |
| |
| commit 6d1b6f9f89c815eaca44acff8e73ece7181f61b6 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Jan 28 05:46:01 2008 -0500 |
| |
| Mark board_init_[fr] as noreturn |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 161b2af4d7b48fd602ce333c355a4df0337892bb |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Jan 28 05:28:50 2008 -0500 |
| |
| Only use TEXT_BASE if defined by the board |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 1b769881750030f10743808b9d6013e11f559350 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Jan 25 07:54:47 2008 +0100 |
| |
| Fix remaining CONFIG_COMMANDS |
| |
| update comments |
| Fix coding style |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 0c9d42e6b0b83d507335a291e3ea99240038f4b9 |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Mon Jan 21 16:46:00 2008 +0100 |
| |
| Add *~ to .gitignore |
| |
| One should never add a backup file ending in with ~ to the git repository. |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 3cfb0c51b2bb5ede54eca85ace5b1ba12be314b0 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 00:02:10 2008 -0600 |
| |
| Remove duplicate defines for ARRAY_SIZE |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit c77ce474b1c57b13e9d36d9830f147966c143694 |
| Author: Stelian Pop <stelian@popies.net> |
| Date: Mon Jan 14 22:08:14 2008 +0100 |
| |
| Fix incorrect address test in AT91F_DataflashSelect(). |
| |
| Signed-off-by: Stelian Pop <stelian@popies.net> |
| |
| commit d9ad115bbf7bb0842de7dbd2502b7e430f83cc3d |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Feb 13 15:09:58 2008 -0600 |
| |
| Fix building of fdt_support.c if DEBUG set |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit ccd6e1464e5396bc1a9aebf7077ddf4342eafe03 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Feb 12 14:53:28 2008 -0600 |
| |
| Add CFG_MPC86xx_DDR_ADDR and CFG_MPC86xx_DDR2_ADDR symbols |
| |
| These replace direct structure references for IMMR sections. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit c62776be8dca4097ca03d4f9415f08d4887b45d0 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Feb 12 00:45:06 2008 +0100 |
| |
| Get rid of "#undef DEBUG" from board config files. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 73bf1e2de7862bcdbd5a9f993b3e84b67c8ea9c8 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Jan 15 17:09:41 2008 -0600 |
| |
| Remove #undef DEBUG from MPC83xx board header files |
| |
| Remove the "#undef DEBUG" line from all Freescale 83xx board header files. |
| The inclusion of this line makes it impossible to enable debug code in |
| other source files, because "#define DEBUG" typically needs to be defined |
| before any header files are included. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 69018ce2e086e9caf35b914d675b82bc4888f077 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 08:25:45 2008 -0600 |
| |
| QE: Move FDT support into a common file |
| |
| Move the flat device tree setup for QE related devices into |
| a common file shared between 83xx & 85xx platforms that have QE's. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 5cf746c303710329f8040d9c62ee354313e3e91f |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:59:09 2008 +0100 |
| |
| [new uImage] Move kernel data find code to get_kernel() routine |
| |
| Verification of the kernel image (in old format) and finding kernel |
| data is moved to a dedicated routine. The routine will also hold |
| support for, to be added, new image format. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 7b325454fd231d4273de3fe373850f777fb086bf |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:58:20 2008 +0100 |
| |
| [new uImage] Cleanup FDT handling in PPC do_boot_linux() |
| |
| Move FDT blob finding and relocation to a dedicated |
| get_fdt() routine. It increases code readability and |
| will make adding support for new uImage format easier. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit b6b0fe6460b7063ac60b9a3531ef210aedb31451 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:58:13 2008 +0100 |
| |
| [new uImage] Cleanup do_botm_linux() boot allocations |
| |
| This patch moves common pre-boot allocation steps shared between PPC |
| and M68K to a helper routines: |
| |
| common: |
| - get_boot_sp_limit() |
| - get_boot_cmline() |
| - get_boot_kbd() |
| |
| platform: |
| - set_clocks_in_mhz() |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit ceaed2b1e54ebf14d600e02fef016c8df5cc4d40 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:57:17 2008 +0100 |
| |
| [new uImage] Move ramdisk loading to a common routine |
| |
| Ramdisk loading code, including initrd_high variable handling, |
| was duplicated for PPC and M68K platforms. This patch creates |
| common helper routine that is being called from both platform |
| do_bootm_linux() routines. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 68d4f05e6b2383a442fb71f80f2a9fbb3d8def68 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:55:53 2008 +0100 |
| |
| [new uImage] Removed dead ramdisk code on microblaze architectures |
| |
| Microblaze do_bootm_linux() includes ramdisk processing code but |
| the ramdisk does not get used anywhere later on. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 5ad03eb3854c162684222a718b44c0716ea0db03 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:55:39 2008 +0100 |
| |
| [new uImage] Factor out common image_get_ramdisk() routine |
| |
| Architecture specific do_bootm_linux() routines share common |
| ramdisk image processing code. Move this code to a common |
| helper routine. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit d3c5eb6dd1f4ed3c3388386cf1d1bf82aa51d56b |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:20:08 2008 +0100 |
| |
| [new uImage] Move FDT error printing to common fdt_error() routine |
| |
| FDT error handling in PPC do_bootm_linux() shares the same message format. |
| This patch moves error message printing to a helper fdt_error() routine. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| Acked-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 42b73e8ee00d48004791dea64b8093fb974c57e1 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:20:07 2008 +0100 |
| |
| [new uImage] Factor out common routines for getting os/arch/type/comp names |
| |
| Move numeric-id to name translation for image os/arch/type/comp header |
| fields to a helper routines: image_get_os_name(), image_get_arch_name(), |
| image_get_type_name(), image_get_comp_name(). |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit e99c26694a384221d336f6448c06a57479c0baa4 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:20:07 2008 +0100 |
| |
| [new uImage] Remove standalone applications handling from boootm |
| |
| Standalone applications are supposed to be run using the "go" command. |
| This patch removes standalone images handling from the do_bootm(). |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 4a2ad5ff6400698433dd7203d34939c3c9cc9bff |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:20:07 2008 +0100 |
| |
| [new uImage] Remove OF_FLAT_TREE support from PPC bootm code |
| |
| Support for OF_FLAT_TREE is to be obsoleted in the near future, |
| remove related code from the bootm routines. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 82850f3d32a2661868ec6876bed7a22c55cef718 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:20:06 2008 +0100 |
| |
| [new uImage] Use image API in SH do_bootm_linux() routine |
| |
| Introduce image handling API for lately added Hitachi SH architecture. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 4a995edec1ac163d9326d143ffe2b47e7543407f |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:20:06 2008 +0100 |
| |
| [new uImage] Rename architecture specific bootm code files |
| |
| Implementation of the do_bootm_linux() and other bootm helper routines is |
| architecture specific code. As such it resides in lib_<arch> directories |
| in files named <arch>_linux.c |
| |
| This patch renames those files to a more clear and accurate |
| lib_<arch>/bootm.c form. |
| |
| List of the renamed files: |
| lib_arm/armlinux.c -> lib_arm/bootm.c |
| lib_avr32/avr32_linux.c -> lib_avr32/bootm.c |
| lib_blackfin/bf533_linux.c -> lib_blackfin/bootm.c |
| lib_i386/i386_linux.c -> lib_i386/bootm.c |
| lib_m68k/m68k_linux.c -> lib_m68k/bootm.c |
| lib_microblaze/microblaze_linux.c -> lib_microblaze/bootm.c |
| lib_mips/mips_linux.c -> lib_mips/bootm.c |
| lib_nios/nios_linux.c -> lib_nios/bootm.c |
| lib_nios2/nios_linux.c -> lib_nios2/bootm.c |
| lib_ppc/ppc_linux.c -> lib_ppc/bootm.c |
| lib_sh/sh_linux.c -> lib_sh/bootm.c |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 7582438c285bf0cef82909d0f232de64ec567a8a |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:20:06 2008 +0100 |
| |
| [new uImage] Return error on image move/uncompress overwrites |
| |
| Check for overwrites during image move/uncompress, return with error |
| when the original image gets corrupted. Report clear message to the user |
| and prevent further troubles when pointer to the corrupted images is passed |
| to do_bootm_linux routine. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit f13e7b2e993c61fed1f607962501e051940d6e80 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue Jan 8 18:12:17 2008 +0100 |
| |
| [new uImage] Cleanup image header pointer use in bootm code |
| |
| - use single image header pointer instead of a set of auxilliary variables. |
| - add multi component image helper routines: get component size/data address |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 1ee1180b6e93e56d0282ac8d943e448e9d0eab20 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue Jan 8 18:17:10 2008 +0100 |
| |
| [new uImage] Cleanup cmd_bootm.c |
| |
| - sort and cleanup headers, declarations, etc. |
| - group related routines |
| - cleanup indentation, white spaces |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit af13cdbc01eaf88880978bfb4f603e012818ba24 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue Jan 8 18:11:45 2008 +0100 |
| |
| [new uImage] Add memmove_wd() common routine |
| |
| Move common, watchdog sensible memmove code to a helper memmmove_wd() routine. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 958fc48abddeab513ea4847e34f22a2e9fe67fe1 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue Jan 8 18:11:44 2008 +0100 |
| |
| [new uImage] Fix FDT header verification in PPC do_boot_linux() routine |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 15158971f49255ccef54f0979a942cfd3de2ae52 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue Jan 8 18:11:44 2008 +0100 |
| |
| [new uImage] Fix uImage header pointer use in i386 do_bootm_linux() |
| |
| Use image header copy instead of a (possibly corrupted) pointer to |
| a initial image location. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 261dcf4624b25f3c551efcf8634e9194fabba9c3 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue Jan 8 18:11:44 2008 +0100 |
| |
| [new uImage] Remove I386 uImage fake_header() routine |
| |
| I386 targets are not using a uImage format, instead fake header |
| is added to ram image before it is further processed by bootm. |
| |
| Remove this fixup and force proper uImage use for I386. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 559316faf7eae0614c91d77f509b57d6c4c091ba |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue Jan 8 18:11:44 2008 +0100 |
| |
| [new uImage] Move CHUNKSZ definition to image.h |
| |
| CHUNKSZ defined for PPC and M68K is set to the same value of 64K, |
| move this definition to a common header. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 321359f20823e0b8c5ad38b64d007a6c48cda16e |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue Jan 8 18:11:43 2008 +0100 |
| |
| [new uImage] Move gunzip() common code to common/gunzip.c |
| |
| Move gunzip(), zalloc() and zfree() to a separate file. |
| Share zalloc() and zfree() with cramfs uncompress routine. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit d45d5a18b6b36688f2365623f9d550566c664b5b |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue Jan 8 18:11:43 2008 +0100 |
| |
| [new uImage] Cleanup OF/FDT #if/#elif/#endif use in do_bootm_linux() |
| |
| Make CONFIG_OF_LIBFDT and CONFIG_OF_FLAT_TREE use more |
| readable in PPC variant of do_bootm_linux() routine. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 5d3cc55ecbae277e08f5ff771da20b1d6a36ec36 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue Jan 8 18:11:43 2008 +0100 |
| |
| [new uImage] Move PPC do_bootm_linux() to lib_ppc/ppc_linux.c |
| |
| PPC implementation of do_bootm_linux() routine is moved to |
| a dedicated file lib_ppc/ppc_linux.c |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit b97a2a0a21f279d66de8a9bdbfe21920968bcb1c |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Tue Jan 8 18:14:09 2008 +0100 |
| |
| [new uImage] Define a API for image handling operations |
| |
| - Add inline helper macros for basic header processing |
| - Move common non inline code common/image.c |
| - Replace direct header access with the API routines |
| - Rename IH_CPU_* to IH_ARCH_* |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit ed29bc4e8142b46b626f67524207b36e43d9aad6 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Jan 31 13:19:58 2008 +0100 |
| |
| Add missing cmd_ximg.o to common/Makefile |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 37e3c62fa07a823e7569c872e3a9395d227ed8e3 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Mon Jan 28 10:15:02 2008 +0100 |
| |
| ADS5121e: DDR2 init/timing update. |
| |
| Signed-off-by: John Rigby <jrigby@freescale.com> |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit ac9152830d7fdebace8a260b7737ef2870c21ca0 |
| Author: John Rigby <jrigby@freescale.com> |
| Date: Wed Jan 30 13:36:57 2008 -0700 |
| |
| Device tree updates |
| |
| Changes to match 5121 device tree going mainline in 2.6.25. |
| |
| Change OF_SOC from "soc5121" to plain "soc". |
| Remove unneeded "ref-frequency" fixups. |
| Remove "address" enetaddr fixup. |
| |
| Add bus-frequency fixup for old OF_SOC so old |
| kernels with old device trees will work with new |
| u-boot with 66MHz IPS clock |
| |
| Signed-off-by: John Rigby <jrigby@freescale.com> |
| |
| commit de55d18df3ff2ea614624e74793de7c43520e0e7 |
| Author: John Rigby <jrigby@freescale.com> |
| Date: Wed Jan 30 13:36:56 2008 -0700 |
| |
| Change IPS freq to 66MHz |
| |
| Recommended frequency is 66MHz |
| Change divider from 4 to 3. |
| |
| Signed-off-by: John Rigby <jrigby@freescale.com> |
| |
| commit cd9cb62f9d8b78d6c3af5d1e9b5a3d68a3d73974 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Jan 14 22:38:55 2008 +0100 |
| |
| xsengine: rename board_post_init to board_late_init |
| |
| missing migration from "Cleanup of some init functions" |
| in c837dcb1a316745092567bfe4fb266d0941884ff |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 8dafa87476b0d7170e219c2f5e3842c833a91807 |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Sat Jan 12 23:35:33 2008 -0500 |
| |
| Add attribute POST_PREREL to ECC memory POST |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit ed2cf548cac80cd3cf8154dcfe7b2685bef45938 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 08:25:45 2008 -0600 |
| |
| QE: Move FDT support into a common file |
| |
| Move the flat device tree setup for QE related devices into |
| a common file shared between 83xx & 85xx platforms that have QE's. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit d38da537943cd36356b9d3d9d9b60533554b81d8 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Wed Jan 23 17:20:14 2008 +0100 |
| |
| AVR32: Make SDRAM refresh rate configurable |
| |
| The existing code assumes the SDRAM row refresh period should always |
| be 15.6 us. This is not always true, and indeed on the ATNGW100, the |
| refresh rate should really be 7.81 us. |
| |
| Add a refresh_period member to struct sdram_info and initialize it |
| properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will |
| panic() until the refresh_period member is updated properly. |
| |
| Big thanks to Gerhard Berghofer for pointing out this issue. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 61151cccb660cdb06a07fb283de6089913d7bde0 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Apr 19 10:10:11 2007 +0200 |
| |
| ATSTK1000: Fix potential flash programming bug |
| |
| The (now obsolete) atngw100 flash programming code was having problems |
| programming the onboard at49bv642 chip. The atstk1000 flash |
| programming code may have the same bug, so import fix for this problem |
| from the AVR32 Linux BSP. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit b2e1d5b64469f10dfcce27f7b0afd935684a8e11 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Nov 22 17:04:13 2007 +0100 |
| |
| ATSTK1004: Fix comment about default load address |
| |
| The default load address is SDRAM + 2MB, not SDRAM + 4MB. The latter |
| wouldn't have worked anyway since the board can only access 4MB of |
| SDRAM. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 8269ab53608d8db2aa06969c337ab0b0518211e5 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Nov 22 17:01:24 2007 +0100 |
| |
| ATSTK1002: Use SDRAM + 4MB as default load address |
| |
| Many people run into problems when they compile a big kernel and load |
| the uImage at the default SDRAM + 2MB address as the kernel will |
| overwrite the uImage as it is being unpacked. Increase the default |
| load address so that we can load a 4MB kernel image without any |
| problems. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 2bcacc2d841b77f3d2d3910db722003742727e9f |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Nov 22 16:51:39 2007 +0100 |
| |
| ATNGW100: Fix default mtest range |
| |
| Let mtest cover the whole SDRAM except the last megabyte, which is |
| where u-boot lives. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 9856a6b3104e0bc210b0868dfe691c52bf03c227 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Tue Jan 22 15:31:56 2008 +0900 |
| |
| sh: Fix register address of SH7722. |
| |
| The address of SH7722 is wrong by old document. |
| This patch fixes this problem. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 30942b18b66f35f2ceedab39af10e9eccaa943cc |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:57 2008 -0500 |
| |
| new command for displaying strings at specified memory locations |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit b58d8b48e25b0c866d167cc577f118f528cd9e0a |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:57 2008 -0500 |
| |
| rewrite/cleanup Blackfin RTC driver |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 94a91e248b71c3ff951fc27cff6909e82ca37d15 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:57 2008 -0500 |
| |
| generate u-boot.ldr for Blackfin targets |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit b779f7a59530436040f157f7841db7ab796542df |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:57 2008 -0500 |
| |
| scrub unused symbols |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit cc2977acc3bbbb7850f16645dd1081f95335868d |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:57 2008 -0500 |
| |
| move Blackfin cpu object list to respective cpu directories |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit d0b01a246d0a351bc7dce1d0c9cf6aebdf6d7505 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:57 2008 -0500 |
| |
| interface to Blackfin on-chip One-Time-Programmable memory |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 4c727c77e43872d3a1d1f76a949fcb3f26a38788 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:56 2008 -0500 |
| |
| add support for memory commands with Blackfin L1 instruction memory |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 6b9097e5e7490aa7b828c6f1a1c7a0e875df8464 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:56 2008 -0500 |
| |
| use C code rather than inline assembly |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 97c26e006d2fa6d4e1560933ee6f385d8b8908b9 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:56 2008 -0500 |
| |
| add Blackfin-specific reginfo command |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 0858b835e7ea501ea084d34cef75932f098342bb |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:55 2008 -0500 |
| |
| add support for Blackfin symbol prefixes to examples |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 8dc48d71a4be753ea9f84956cd33600de35fad04 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:55 2008 -0500 |
| |
| add Blackfin-specific bdinfo command |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 0003613e3c7df3b84b2cb92e797d77f46f15a43a |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:55 2008 -0500 |
| |
| move -ffixed-P5 to blackfin_config.mk and drop unused -D__BLACKFIN__ |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 60fa72d65610c7ef33e1d6db858979d05ff0df58 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:55 2008 -0500 |
| |
| unify the Blackfin board targets |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit d4d7730853e5d675f76ec666807da3028c91d592 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:55 2008 -0500 |
| |
| punt Blackfin VDSP headers and import sanitized/auto-generated ones |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 6cfcce67671a3425229d66203386fa3cbd0cc3bd |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:54 2008 -0500 |
| |
| always pull in asm/blackfin.h for Blackfin ports |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit bf53974c2ddae678d7660f2b5ccfeb0732b6f5dc |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:54 2008 -0500 |
| |
| add missing __raw versions of Blackfin read/write io functions |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 24e02d0fd3acc50e73e1a3cdd567f0a77946f15d |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:54 2008 -0500 |
| |
| add the default Blackfin logo used by Blackfin boards with splash screens |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 4c58eb5552220e425c8af6ac8d2839244a2f57b1 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:54 2008 -0500 |
| |
| add some more Blackfin docs |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 32a9f5f2160a034ea87ea651b233ef7c635e55cf |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:54 2008 -0500 |
| |
| make smc91111_eeprom managment simpler by depending on the board configuration file rather than a hardcoded list of boards |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 4087bc88cebec75c432a7fe9f6afb545b0919831 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:54 2008 -0500 |
| |
| fix building on Blackfin as the assembler supports the .set syntax, not the = syntax, for assigning symbols |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit b45264ee85cbd92020640a32e02fb434fd557108 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Feb 4 19:26:53 2008 -0500 |
| |
| add gitignores for Blackfin pieces |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit a93907c43f847f076dd0e34ee3b69b5e8e6d0d29 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Jan 18 01:14:03 2008 +0100 |
| |
| TFTP: add host ip addr support |
| |
| allow to use a different server as set in serverip |
| add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length |
| if not defined the max length will be at 128 |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit e56b4b494cd92def577969f9678395aa22d34c9f |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Wed Jan 9 14:35:26 2008 -0600 |
| |
| 85xx,86xx: Determine I2C clock frequencies and store in global_data |
| |
| Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx. |
| |
| Update the get_clocks() function in 85xx and 86xx to determine the I2C |
| clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 7ec8bb15ee368ea54d48d64867767a704d9ab4c2 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Dec 27 10:56:54 2007 +0100 |
| |
| OMAP5912: fix FIFO handling in UART driver |
| |
| According to the OMAP5912 Serial Interfaces Reference Guide (see |
| http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the |
| FIFO_EN enable bit in the FIFO Control Register (FCR) can only be |
| changed when the baud clock is not running, i. e. when both DLL and |
| DLH are set to 0. |
| |
| Thus make sure that DLL and DLH are 0 when writing the FCR. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 16158778b5f52f201e95ded2d2d9084b0ed5670d |
| Author: Harald Welte <laforge@openmoko.org> |
| Date: Wed Dec 19 15:10:52 2007 +0100 |
| |
| ARM: S3C24x0 SoC NAND controller support |
| |
| This patch adds NAND support to the S3C24x0 SoC code in u-boot |
| |
| Signed-off-by: Harald Welte <laforge@openmoko.org> |
| |
| commit a7c185ed3d9f8ebd85cfc286e1ffee72e4803163 |
| Author: Harald Welte <laforge@openmoko.org> |
| Date: Wed Dec 19 14:24:40 2007 +0100 |
| |
| ARM: s3c24xx: Multiple serial port support |
| |
| This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's |
| |
| Signed-off-by: Harald Welte <laforge@openmoko.org> |
| |
| commit a25f72f1f73a11de68251fb88c89991e202e68fa |
| Author: Harald Welte <laforge@openmoko.org> |
| Date: Wed Dec 19 14:16:57 2007 +0100 |
| |
| ARM: arm920t: Allow use of 'gd' pointer from IRQ |
| |
| This patch allows us to use the 'gd' pointer (and thus environment |
| and everything else associated with it) from interrupt context on |
| arm920t. |
| |
| Signed-off-by: Harald Welte <laforge@openmoko.org> |
| |
| commit be19bd5cd0f454b63298844a0b5377e029b2caad |
| Author: Harald Welte <laforge@openmoko.org> |
| Date: Wed Dec 19 14:19:38 2007 +0100 |
| |
| ARM: arm920/s3c24xx: IRQ demulitplexer callback |
| |
| This patch adds a IRQ demultiplexer callback to the arm920 cpu core code, |
| plus a stub implementation of it for the S3C2410. |
| |
| The purpose is to allow arm920t implementations such as the s3c24x0 to |
| implement interrupt handlers in u-boot without having to touch core |
| arm920t code. |
| |
| Signed-off-by: Harald Welte <laforge@openmoko.org> |
| |
| commit a41dbbd98d201d8aea31b5d21df4742c20cd7eda |
| Author: Hebbar <gururajakr@sanyo.co.in> |
| Date: Tue Dec 18 16:03:07 2007 -0800 |
| |
| ARM: Display Ethernet info in do_bdinfo only if CONFIG_CMD_NET is defined |
| |
| Add ifdef to bdinfo command to display ethernet information |
| only if CONFIG_CMD_NET is defined for arm modules. |
| |
| Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in> |
| |
| commit f7ad79b6f9f0f45437b62e19b45356cc2aaf4884 |
| Author: Hebbar <gururajakr@sanyo.co.in> |
| Date: Tue Dec 18 16:00:54 2007 -0800 |
| |
| ARM: add I2C init function call in lib_arm/board.c |
| |
| Adds I2C init func call to init sequence for ARM boards. This is |
| present in ppc,blackfin and other processor init sequence. |
| |
| Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in> |
| |
| commit ff02f139804f3cb61414f7bbcbfdaa0279e3efae |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Feb 1 09:38:29 2008 +0100 |
| |
| ppc4xx: Fix ndfc HW ECC byte order |
| |
| The current ndfc HW ECC implementation swaps the first two ECC bytes. |
| But the 4xx NDFC already uses the SMC (Smart Media Card) ECC ordering, |
| so this swapping in the HW ECC driver is bogus. This patch fixes this |
| problem and now really uses the SMC ECC byte order. |
| |
| Thanks to Sean MacLennan for pointing this out. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e1d1429b49b0ee58c80f8c7b29c1ebaf8be7f5f1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 30 15:35:50 2008 +0100 |
| |
| ppc4xx: Fix GPIO configuration for pcs440ep |
| |
| The SRD0_PFC0 register was not configured correctly to enable the GPIO's |
| 49-63 for GPIO. They have been configured as trace signals. This patch |
| fixes this by clearing the corresponding bit. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 28d77d968bfe0316deb5bf15c17f57d5ff2c8821 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 30 14:48:28 2008 +0100 |
| |
| ppc4xx: Fix problem with init-ram bigger than 4k on 440 platforms |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4fedfddf97461b88668b9aec774dfb7a0c6dc368 |
| Author: Ladislav Michl <ladis@linux-mips.org> |
| Date: Fri Dec 7 00:42:32 2007 +0100 |
| |
| ARM: Board voiceblue update |
| |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| |
| commit 2c5260f711168d5ee91c70ddbb7d897013eefc46 |
| Author: Ladislav Michl <ladis@linux-mips.org> |
| Date: Thu Dec 6 23:24:57 2007 +0100 |
| |
| ARM: AT91RM9200 based boards config cleanup |
| |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| |
| Remove nowhere used struct bd_info_ext, remove trailing whitespaces, fix |
| indentation. |
| |
| commit 481f28b1db5cd21deb55f69399ba240e107af4c7 |
| Author: Ladislav Michl <ladis@linux-mips.org> |
| Date: Thu Dec 6 22:59:16 2007 +0100 |
| |
| ARM: Fix at91rm9200dk base address |
| |
| Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was |
| renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced |
| with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT. |
| However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to |
| CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact. |
| I'm sending this patch 4th (!) time in hope it produces at least some |
| reaction. |
| |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| |
| Fix at91rm9200dk base and environment address. |
| |
| commit c95219fae2a7add7daa2f91aedca65b1698465c7 |
| Author: stefano babic <sbabic@denx.de> |
| Date: Tue Nov 20 10:40:24 2007 +0100 |
| |
| MMC for PXA 27X (resubmit) |
| |
| MMC support for X_Scale PXA is broken and does not work. |
| Mainly, the mmc_init() function cannot recognize current SD/MMC cards. |
| There were already some patches around the world but none of them was |
| merged into the official u-boot tree. |
| |
| This patch makes order fixing this issue. Resubmit after code cleanup. |
| |
| Applied and tested on PXA 270 (TrizepsIV module). |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| |
| commit 96bbfa1e6625ce23a150936863b3ecf4c853eb33 |
| Author: stefano babic <sbabic@denx.de> |
| Date: Tue Nov 20 10:37:04 2007 +0100 |
| |
| Fix gcc issues in pxa-regs.h |
| |
| Fix gcc4 issue. With some toolchain, a previous patch that fixes gcc4 |
| issues generates wrong code. |
| (Problem was reported with gcc-4.0.2-glibc-2.3.6/arm-softfloat-linux-gnu). |
| This patch fixes the problem and solves the gcc-4 issues as the linux |
| kernel does. |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| Signed-off-by: Dmitry Ivanov <ivadmitry@gmail.com> |
| |
| commit 7047b388876e7b905b2ec4edb8010543e3641b85 |
| Author: Jens Gehrlein <sew_s@tqs.de> |
| Date: Tue Jan 29 08:45:03 2008 +0100 |
| |
| TQM834x: enable DHCP |
| |
| Signed-off-by: Jens Gehrlein <sew_s@tqs.de> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit a877004d44ca7dbc1e618add3eeb1da7c84e4bec |
| Author: Jens Gehrlein <sew_s@tqs.de> |
| Date: Tue Jan 29 08:45:02 2008 +0100 |
| |
| TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit). |
| |
| Signed-off-by: Jens Gehrlein <sew_s@tqs.de> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 8931ab176025b03cfc320b3fd1eca432a88ed560 |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Sat Jan 26 23:41:19 2008 -0500 |
| |
| Fix conditional compilation of mpx8xxx_spi driver |
| |
| This driver should only compile if CONFIG_MPC8XXX_SPI is set |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 63f732d3d3880feb531f48af247c025bf01462b0 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Tue Jan 29 17:00:34 2008 +0100 |
| |
| API: Provide dummy halt() in the glue layer. |
| |
| This fixes a demo app link failure on platforms configured with CONFIG_PANIC_HANG. |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit 0dc1fc22af86d16993388d9ed9630dbaa2d51826 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Tue Jan 29 16:57:38 2008 +0100 |
| |
| API: Convert conditional building to the new scheme. |
| |
| This fixes a build breakage with CONFIG_API enabled, which appeared after |
| the recent changes in the U-Boot build system. |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit 98b742489c09780be6a832eeaa4e5eff824792bb |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Jan 25 09:56:17 2008 +0100 |
| |
| inka4x0: remove dead code |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 4f93f8b1a4d35b6d302842132edba920ef8f62aa |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed Jan 23 16:31:06 2008 -0600 |
| |
| 86xx: Add reginfo command |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit ddcebcb638715a6278da93b553d5016f99823816 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed Jan 23 16:31:05 2008 -0600 |
| |
| 86xx: Add print_laws function to fsl_law.c |
| |
| This can be used for debug, and will be used by board code |
| to help implement reginfo. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 9cd32426f26a0567bb61f339edd83c6a2ce9bfc3 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed Jan 23 16:31:04 2008 -0600 |
| |
| 86xx: Remove old-style law setup code |
| |
| This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 713d8186649dae874613d495b0cecaa039a98b30 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed Jan 23 16:31:03 2008 -0600 |
| |
| 86xx: Convert sbc8641d to use new law setup code. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 031976f6364b93833e989f57e9f1e023e0be8c4c |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed Jan 23 16:31:02 2008 -0600 |
| |
| 86xx: Convert mpc8610hpcd to new law setup method. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 4933b91f8a49e436681f163df3173beb91cac44a |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed Jan 23 16:31:01 2008 -0600 |
| |
| 86xx: Support new law setup method and convert mpc8641 |
| |
| Adds the support code in cpu/mpc86xx for the new law setup code |
| recently created fsl_law.c, and changes the MPC8641HPCN config |
| to use this code. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 1a41f7ce9c086e208c0eabf52565a237af2a2bd1 |
| Author: Becky Bruce <becky.bruce@freescale.com> |
| Date: Wed Jan 23 16:31:00 2008 -0600 |
| |
| 86xx: Rearrange the sequence in start.S |
| |
| * split the BAT initialization so that only 2 BATs (for the boot page |
| and stack) are programmed very early on. The rest are initialized later. |
| * Move other BAT setup, ccsrbar setup, and law setup later in the code |
| after translation has been enabled. |
| |
| These changes will facilitate the moving of law and BAT initialization |
| to C code, and will aid with 36-bit physical addressing support. |
| |
| Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
| |
| commit 33dac03b1b5d61e4fed7bad445ba40b4c97feba0 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 23 14:41:37 2008 +0100 |
| |
| Coding Style Cleanup; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 865f0f9754b95183cad395de7e8cb85df0c6ea1f |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 23 14:31:17 2008 +0100 |
| |
| Coding Style Cleanup; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit cfe5ca77976afdbe7ecb86e39fd7505bde636ace |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Fri Jan 18 10:07:04 2008 +0800 |
| |
| mpc83xx: Correct the struct spi8xxx in mpc8xxx_spi.h |
| |
| The commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb |
| cause the 83xx immap broken, so the DMA and PCI will |
| be failed. |
| |
| The patch fix the struct spi8xxx and rm struct spi83xx. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 6b4439444286e0fcd01596df504e6ca897ad3e5a |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sat Apr 14 17:11:49 2007 +0200 |
| |
| AVR32: ATNGW100 board support |
| |
| Add support for the ATNGW100 Network Gateway reference design, |
| including flash, ethernet and MMC support. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit e006927a0b9a54e8ee7685d8ac748aaad6801862 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sat Nov 24 18:15:31 2007 +0100 |
| |
| AVR32: Initialize ipaddr, loadaddr and bootfile at startup |
| |
| I don't know why the relevant layers can't do this by itself, but this |
| is what ppc does. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 799891ef7b1b3432032ec23466df6b665a797fa4 |
| Author: Michael Schwingen <michael@schwingen.org> |
| Date: Fri Jan 18 00:04:28 2008 +0100 |
| |
| Add AcTux board support |
| |
| Hi, |
| |
| The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the |
| files that |
| contain changes for multiple boards, the board-specific files follow as |
| separate patches. |
| |
| Signed-off-by: Michael Schwingen <michael@schwingen.org> |
| |
| commit 66a4344a4d910a11125df7768899ad529719855e |
| Author: Michael Schwingen <michael@schwingen.org> |
| Date: Wed Jan 16 19:53:23 2008 +0100 |
| |
| add AcTux-4 board support |
| |
| Signed-off-by: Michael Schwingen <michael@schwingen.org> |
| |
| commit bc24345e4101a5c996d6b48ce497b09c53025dc6 |
| Author: Michael Schwingen <michael@schwingen.org> |
| Date: Wed Jan 16 19:51:55 2008 +0100 |
| |
| add AcTux-3 board support |
| |
| Signed-off-by: Michael Schwingen <michael@schwingen.org> |
| |
| commit aebf00fc4d1343b24715373893f7b20bf462d1e9 |
| Author: Michael Schwingen <michael@schwingen.org> |
| Date: Wed Jan 16 19:51:14 2008 +0100 |
| |
| add AcTux-2 board support |
| |
| Signed-off-by: Michael Schwingen <michael@schwingen.org> |
| |
| commit ea99e8f05b7240fd657739e286664664ae160abe |
| Author: Michael Schwingen <michael@schwingen.org> |
| Date: Wed Jan 16 19:50:37 2008 +0100 |
| |
| add AcTux-1 board support |
| |
| Signed-off-by: Michael Schwingen <michael@schwingen.org> |
| |
| commit 3d9f3bfb7a33efe8e41e01b025563cd712c57d64 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Jan 14 19:20:08 2008 +0100 |
| |
| ARM: remove useless function board_post_init |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 96bd462942022e4569b582c072a0ed26de1cd19b |
| Author: Michael Schwingen <michael@schwingen.org> |
| Date: Thu Jan 10 14:59:46 2008 +0100 |
| |
| IXP: enable RTS |
| |
| enables the RTS signal with CONFIG_SERIAL_RTS_ACTIVE. |
| No handshaking is done, but the active RTS signal allows to |
| connect to the target using a PC which is using RTS/CTS |
| handshake, and does no harm if the PC is set to ignore RTS. |
| |
| Signed-off-by: Michael Schwingen <michael@schwingen.org> |
| |
| commit a1cf027a08f9dc1c0e769499e6f4fbddcf9cab93 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Jan 7 08:41:34 2008 +0100 |
| |
| IXP: add dynamic microcode addr |
| |
| allow to load the microde from flash or ram by download it through |
| the serial or other. |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 63ebcc4615dd39926ccf61f1d5f3510262ef6564 |
| Author: Michael Schwingen <michael@schwingen.org> |
| Date: Sat Nov 10 15:44:12 2007 +0100 |
| |
| load ixp42x NPE firmware from separate flash block, remove dead code |
| |
| Hi, |
| |
| the following patch adds support to move the IXP42X NPE firmware to a |
| separate flash block, whose start address is defined in |
| CONFIG_IXP4XX_NPE_EXT_UCODE_BASE. Using that, it is possible to build |
| NPE-enabled u-boot without copyright problems due to the NPE firmware. |
| |
| I hope the patch applies, I get whitespace-related differences in the NPE |
| files due to trailing whitespace in the original versions. |
| |
| Signed-off-by: Michael Schwingen <michael@schwingen.org> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 57a127201eb3d8cc19170a008e0bd7af608bd72f |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Jan 15 14:15:46 2008 -0600 |
| |
| ColdFire: MCF547x_8x - Add M5475EVB and M5485EVB support |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit 1aee111135d8660a164d4f6bf7d66b032ea535cf |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Jan 15 14:02:49 2008 -0600 |
| |
| ColdFire: MCF547x_8x - Add M547xEVB and M548xEVB board |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit 777d1abd9796f1c2e148417cc10657e847d318ce |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Jan 15 14:00:25 2008 -0600 |
| |
| ColdFire: Add MCF547x_8x FEC driver |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit 72f56adc0b25d43875ad067bae6be1bcea86b79f |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Jan 15 13:54:09 2008 -0600 |
| |
| ColdFire: Add MCF547x_8x dma code and header files |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit ce09fc49b56ea3c442794b6be9b7db4b99dfdc87 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Jan 15 13:52:03 2008 -0600 |
| |
| ColdFire: Add MCF547x_8x dma code - 2 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit 11865ea844e7154fd30c7e2860da4eed4a12ad1f |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Jan 15 13:48:52 2008 -0600 |
| |
| ColdFire: Add MCF547x_8x dma code - 1 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit 4621fc3fe7cd65b78b3cbd31f65c9f7f72b22bd3 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Jan 15 13:39:44 2008 -0600 |
| |
| ColdFire: Add MCF547x_8x related header files |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit 570c0186aecab1b747b2d44d0e1d3c1ac4cb27f5 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Tue Jan 15 13:37:34 2008 -0600 |
| |
| ColdFire: Add MCF547x_8x cpu arch |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit e2756f4b54aba0e0523b81dd145666829cf7fd59 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jan 14 17:47:23 2008 -0600 |
| |
| ColdFire: Add MCF5227x cpu and M52277EVB support-3 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit c87581027994c148131b2f11aa75501f782ec19a |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jan 14 17:46:19 2008 -0600 |
| |
| ColdFire: Add MCF5227x cpu and MCF52277EVB support-2 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit 1552af70ecab11b9f3dceff7528ed15faf678b9d |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jan 14 17:43:33 2008 -0600 |
| |
| ColdFire: Add MCF5227x cpu and M52277EVB support-1 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit 397b7b81a1f1008798ae1206913508cc89cb3a7d |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jan 14 17:35:44 2008 -0600 |
| |
| ColdFire: Fix CFI Flash low level Read/Write macro |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit aa5f1f9dc815a76f6dffb580798599c028fe7feb |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jan 14 17:23:08 2008 -0600 |
| |
| ColdFire: Add M5373EVB platform support - 2 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit 1ac559d4aa358f63b48c62b564224c06feeb4e36 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jan 14 17:19:54 2008 -0600 |
| |
| ColdFire: Add M5373EVB platform support - 1 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit 320d61991fa3190ee41765601ed017b6b5ff7b2b |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jan 14 17:17:03 2008 -0600 |
| |
| ColdFire: Update FlexBus CS for MCF532x |
| |
| Definition update and change from 16bit to 32bit |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit 2e72ad0644b940817a89a3590ce0d7b99c05c396 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jan 14 17:11:47 2008 -0600 |
| |
| ColdFire: PCI and misc updates for MCF5445x |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit d2b16493480ac3d4a60ad7d835b0dc27d2e99cee |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jan 14 17:06:55 2008 -0600 |
| |
| ColdFire: MCF5445x header files cleanup |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit d9aae6260993a93f7fcf13abff85a601f4f50ea7 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jan 14 16:59:42 2008 -0600 |
| |
| ColdFire: MCF532x header files cleanup |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Signed-off by: John Rigby <jrigby@freescale.com> |
| |
| commit 7af7751d047e74b2ec58400f97b879c56446b3e8 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jan 14 15:30:15 2008 -0600 |
| |
| ColdFire: Add modules header files |
| |
| Add CF specific modules header files |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Signed-off-by: John Rigby <jrigby@freescale.com> |
| |
| commit 2956acd5ef93a498337f8ac2ec6ae6a77d491dc5 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Jan 17 12:48:00 2008 -0600 |
| |
| codingstyle cleanup for spi driver |
| |
| ..and rm unused CONFIG_FSL_SPI define |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit d59feffb42c9f174116db7a82a311df98983dfce |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Wed Jan 16 17:12:12 2008 -0500 |
| |
| FSL: Fix common EEPROM_data structure definition |
| |
| - Fix EEPROM_data structure definition according to System EEPROM Data Format. |
| - Read MAC addresses from EEPROM to ethXaddr before saving ethXaddr to |
| bd->bi_ethaddr. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit 6bee764bd6da510a4aad614880300c968bc7318d |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Wed Jan 16 15:48:12 2008 -0600 |
| |
| 86xx: enable command-line editing |
| |
| Enable command-line editing for all MPC86xx boards. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 80ddd22626d321a772ebfba304eb7830cb4f6bac |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Wed Jan 16 22:37:42 2008 -0500 |
| |
| Implement hard SPI driver on MPC8349EMDS |
| |
| This patch implements the fsl_spi driver on the MPC8349EMDS evaluation board. |
| This board has an ST M25P40 4Mbit EEPROM on its SPI bus |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Wed Jan 16 22:37:35 2008 -0500 |
| |
| Add support for a Freescale non-CPM SPI controller |
| |
| This patch adds support for the SPI controller found on Freescale PowerPC |
| processors such as the MCP834x family. Additionally, a new config option, |
| CONFIG_HARD_SPI, is added for general purpose SPI controller use. |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit a8cb43a89be6cfd283257a603dd9841503ccce0f |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Jan 17 18:23:19 2008 +0800 |
| |
| mpc83xx: Fix the fatal conflict of merge |
| |
| The commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7 |
| will cause the mpc8315erdb board can't boot up. |
| |
| The patch fix that bug, and remove the duplicated #ifdef |
| CFG_SPCR_TSECEP code and clean the SCCR_TSEC2 for |
| MPC8313E processor. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 3259eeaa4148125a81417477f62c05bd67f60587 |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Thu Jan 17 08:50:09 2008 -0500 |
| |
| Merge Sequoia beautification into Korat code |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit e16925773211291b562e77187061e9dd1d757217 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Jan 17 07:45:05 2008 +0100 |
| |
| net: add 'ethrotate' environment variable |
| |
| [PATCH] net: add 'ethrotate' environment variable |
| |
| This patch replaces the buildtime configuration option |
| CONFIG_NET_DO_NOT_TRY_ANOTHER through the 'ethrotate' runtime |
| configuration veriable. See README. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit ba52be3d0e618c26070e93aaf3c1f2d2adf5571f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jan 17 14:29:04 2008 +0100 |
| |
| ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5 |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 55ed1516cbc1dad3ae277c67ee06fc4a46eaac7d |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Thu Jan 17 18:07:32 2008 +0900 |
| |
| sh: Remove CONFIG_COMMANDS from MS7720SE config file |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 055606bd25e88c0cd04ad348a679a04b1b616bee |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Wed Jan 16 18:39:20 2008 +0100 |
| |
| ppc4xx: Netstal HCU4 board: added various fixes and POST |
| |
| - Moved some common code to netstal/common/nm_bsp.c. |
| - sdram initialisation goes go netstal/common/fixed_sdram.c. |
| - Added support for POST. |
| - Stylistic cleanups (multi-line comments/ enforce 80 colomn width) |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 69b0634a4ee98c9791815600d43b99f626a952f3 |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Thu Jan 17 12:53:56 2008 +0100 |
| |
| ppc4xx: netstal/common define routines used by all boards |
| |
| Added some routines used by all Netstal boards: |
| - nm_bsp.c: - nm_show_print and |
| - common_misc_init_r |
| - set_params_for_sw_install. Very specific code to handle our SW |
| installation procedure |
| - fixed_sdram.c: Common routines for HCU4 (and upcoming) MCU25 boards |
| to handle sdram initialization. |
| - nm.h: Common header |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit efeff5382b7a91b48a1aa68b2b75f92ad1d33ff8 |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Wed Jan 16 18:39:18 2008 +0100 |
| |
| ppc4xx: Netstal HCU5 board: added various fixes and POST |
| |
| - Moved some common code to nestal/common/nm_bsp.c. |
| - Added support for the vxWorks EDR. |
| - Enable trace for Lauterbach, if present. |
| - Added support for POST. |
| - Stylistic cleanups (multi-line comments/ enforce 80 colomn width) |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 4371090e5da77edc7bf9f296364db4801639d9c4 |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Wed Jan 16 18:39:08 2008 +0100 |
| |
| ppc4xx: Netstal HCU5 board. Added POST. Various fixes |
| |
| - Various fixes |
| - Reduced rom_size from 384 to 320 kB |
| - Environment is now in flash |
| - Added POST |
| - Support for OF |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 4bd5036e60afac37e484c2d35cbbe7f6cc1623e7 |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Wed Jan 16 18:37:50 2008 +0100 |
| |
| ppc4xx: Netstal HCU4 board. Added POST. Various fixes |
| |
| - Various fixes |
| - Reduced rom_size from 384 to 320 kB |
| - Environment is now in flash |
| - Added POST |
| - Support for OF |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 1a3ac86b79fcb690275c85861c8efa6a3899060a |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Jan 17 10:53:08 2008 +0100 |
| |
| ppc4xx: Complete DU440 board support |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 15a08bc2bef91e5f1ea4b9cf60e46832d86bcc1f |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Jan 17 10:52:30 2008 +0100 |
| |
| ppc4xx: Add DU440 board support |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit ac331da07db3860f11fa1d0fd3db7c810bce1198 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Thu Jan 17 15:53:52 2008 +0900 |
| |
| sh: Update SuperH SCIF driver |
| |
| This patch fixed wrong SH7720 CPU macro and changed macro that |
| calculated value of SCBRR register. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 334e442e6fac59be91244063e9b3f6ca25e8daf8 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Wed Jan 16 15:12:47 2008 +0100 |
| |
| Set ips dividor to 1/4 of csb clock. |
| |
| Previous setting cause ips clock to be out of spec. This bug was found by John |
| Rigby from Freescale. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit 7dc358bb0de9e2fa341f3b4c914466b1f34b2d89 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 02:19:18 2008 -0600 |
| |
| 85xx: Get ride of old TLB setup code |
| |
| Now that all boards have been converted, remove old config code and the |
| config option for the new style. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 3b558e26a5ef31635787d6d6e97d70939d4f892d |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 02:02:10 2008 -0600 |
| |
| 85xx: Convert TQM85xx to new TLB setup |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 74121b470c14f7eaf284ee838bffca6f9521069e |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 01:56:32 2008 -0600 |
| |
| 85xx: Convert STXGP3 & STXSSA to new TLB setup |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 143b518d9125b54f96f1d7f1afc640b8aae81ff0 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 01:44:34 2008 -0600 |
| |
| 85xx: Convert SBC8540/SBC8560/SBC8548 to new TLB setup |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 818218bac6a11591e2542c344d2330e0f4e1968b |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 01:31:34 2008 -0600 |
| |
| 85xx: Convert PM854/PM856 to new TLB setup |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit ff4681c9285b2b4d24552a19cacc1769fe2fc7e0 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 01:25:33 2008 -0600 |
| |
| 85xx: Convert MPC8540EVAL to new TLB setup |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 73aa9ac2b46f1cfd039106ebd6b9865016005234 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 01:12:22 2008 -0600 |
| |
| 85xx: Convert MPC8568 MDS to new TLB setup |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 0db37dc2eed30884db2daa24dbd9a113b5d00610 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 01:01:09 2008 -0600 |
| |
| 85xx: Convert MPC8541/MPC8555/MPC8548 CDS to new TLB setup |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 219a81b98d834f9071b6f7c3bdc6b7ec39cc46cc |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 00:52:29 2008 -0600 |
| |
| 85xx: Convert MPC8540/MPC8560 ADS to new TLB setup |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 80d0b6a1498761c4355b2db9c8001b04c295e7b8 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 17 00:32:17 2008 -0600 |
| |
| 85xx: Convert ATUM8548 to new TLB setup |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 0f7a3dc95cbff3c21bd6dbc639313796412bbbab |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 23:11:57 2008 -0600 |
| |
| 85xx: Convert MPC8544 DS to new TLB setup |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 8716318057a5f60ab1ba081ece2dbe82ae00e1ee |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 22:38:34 2008 -0600 |
| |
| 85xx: Reworked initial processor init |
| |
| Reworked the initial processor initialzation sequence: |
| * introduced cpu_early_init_f that is run in address space 1 (AS=1) |
| * Moved TLB/LAW and CCSR init into cpu_early_init_f() |
| * Reworked initial asm code to do most of the core init before TLBs |
| |
| The main reasons for these changes are to allow handling of 36-bit phys |
| addresses in the future and some of the issues that will exist when we |
| do that. |
| |
| There are a few caveats on what can be initialized via the LAW and TLB |
| static tables: |
| * TLB entry 14/15 can't be initialized via the TLB table |
| * any LAW that covers the implicit boot window (4G-8M to 4G) must map to |
| the code that is currently executing. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 44a23cfd6360a68eaa41f945190618a55519eac3 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 22:33:22 2008 -0600 |
| |
| 85xx: Introduce new tlb API |
| |
| Add a set of functions to manipulate TLB entries: |
| * set_tlb() - write a tlb entry |
| * invalidate_tlb() - invalidate a tlb array |
| * disable_tlb() - disable a variable size tlb entry |
| * init_tlbs() - setup initial tlbs based on static table |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit be88b1699863c262818f3af7f60173b4d48df8fc |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jan 17 07:50:17 2008 +0100 |
| |
| ppc4xx: Fix remaining CONFIG_COMMANDS in 4xx files |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c8c41d4a80b1a8ad5984a287d81ea780496259f8 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 10:04:42 2008 -0600 |
| |
| 85xx: Use proper defines for PCI addresses |
| |
| We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE. |
| While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only |
| be used for configuring the PCI ATMU. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 54a5070115eff38e9b324b78abdfa0b4520580b9 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 09:22:29 2008 -0600 |
| |
| 85xx: Remove old style of LAW init |
| |
| All boards are now using the new fsl_law code so we can drop the old version. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 4d3521cc79cabc61edf12c48c0ce318d4efb712f |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 09:15:29 2008 -0600 |
| |
| 85xx: convert remaining 85xx boards over to use new LAW init code |
| |
| Converted ATUM8548, MPC8568 MDS, MPC8540 EVAL, and TQM85xx boards over |
| to use new LAW init code. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 572b13afc42710f2957c382a710360429c0e099b |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 09:11:53 2008 -0600 |
| |
| 85xx: convert STXGP3/STXSSA over to use new LAW init code |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 45f2166ac0233a9263058378f39612bd11f61196 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 09:06:48 2008 -0600 |
| |
| 85xx: convert PM854/PM856 over to use new LAW init code |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit e2b159d0070ee06e4ac7e2f9381d3e8e542e614a |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 09:05:27 2008 -0600 |
| |
| 85xx: convert SBC8540/SBC8560/SBC8548 over to use new LAW init code |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 2cfaa1aa1aac39a81006b7b27e0e431bf21f6dfa |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 01:45:10 2008 -0600 |
| |
| 85xx: convert MPC8541/MPC8555/MPC8548 CDS over to use new LAW init code |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 7232a2724ccc9dcbc3ec4ef84ada02f13ccd1238 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 01:32:06 2008 -0600 |
| |
| 85xx: convert MPC8540/MPC8560 ADS over to use new LAW init code |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 4bcae9c92aee0d72a2f19b81cab27ef38107ce75 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 01:16:16 2008 -0600 |
| |
| 85xx: convert MPC8544 DS over to use new LAW init code |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 83d40dfd79fe868796275802f60116d84b9e4395 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Jan 16 01:13:58 2008 -0600 |
| |
| 85xx: Move LAW init code into C |
| |
| Move the initialization of the LAWs into C code and provide an API |
| to allow modification of LAWs after init. |
| |
| Board code is responsible to provide a law_table and num_law_entries. |
| |
| We should be able to use the same code on 86xx as well. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit bed8ce838a609aaab136d43b25e6df2a520bc854 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Dec 22 15:03:12 2007 +0100 |
| |
| qemu-mips: active HUSH PARSER, AUTO_COMPLETE and CMDLINE_EDITING |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 0764c164fed6277d359cf132d55187ea34290114 |
| Author: Vlad Lungu <vlad@comsys.ro> |
| Date: Wed Jan 16 19:27:51 2008 +0200 |
| |
| MIPS:Target support for qemu -M mips |
| |
| With serial, NE2000, IDE support. Tested in big-endian mode. |
| Memory size hard-coded to 128M for now, so don't play with |
| the -m option. |
| |
| Signed-off-by: Vlad Lungu <vlad@comsys.ro> |
| |
| commit 7f52fa3c2df59e49dc2badd7c084cf2d007c438f |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Jan 11 00:01:37 2008 +0100 |
| |
| Fix nfs command help to reflect that the serverip is optional |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit b8f4162a4f7a9bee5e9d0305c17f2d34de466a9b |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Mon Dec 10 22:32:14 2007 +0100 |
| |
| bf537-stamp: remove already defined is_zero_ether_addr and is_multicast_ether_addr |
| |
| and move is_valid_ether_addr board file |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit c2f896b8fc4722e36915903e1942e138e68ce804 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Wed Jan 16 16:13:31 2008 +0900 |
| |
| drivers/net/rtl8139.c: rx_status should be le32_to_cpu(rx_status). |
| |
| rx_status on the memory is basically in LE, but needs to be handled in CPU |
| endian. le32_to_cpu() takes up this mission. Even if on the sane hardware, |
| it'll work fine. |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Cc: Masami Komiya <mkomiya@sonare.it> |
| Cc: Lucas Jin <lucasjin@gmail.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 96a236746fe6a7b84802afb4ed31536696d34812 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Wed Jan 16 16:12:26 2008 +0900 |
| |
| drivers/net/rtl8139.c: Fix cache coherency issues |
| |
| Current driver is meant for cache coherent systems. This patch adds |
| flush_cache() routines to support cache non-coherent systems. |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Cc: Masami Komiya <mkomiya@sonare.it> |
| Cc: Lucas Jin <lucasjin@gmail.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit d1276c76c1e2b5035296689280ba1acb2c425104 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Wed Jan 16 16:11:14 2008 +0900 |
| |
| drivers/net/rtl8139.c: Fix tx timeout |
| |
| "to = (currticks() + RTL_TIMEOUT)" has possibilities to wrap around. If it |
| does, the condition "(currticks() < to)" becomes invalid and immediately |
| leads to tx timeout error. This patch introduces the fine-graded udely(10) |
| loops to ease the impact of wrapping around. |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Cc: Masami Komiya <mkomiya@sonare.it> |
| Cc: Lucas Jin <lucasjin@gmail.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 18ee320ff63edbf7b27bbeb05f0e12a52302c68a |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Fri Jan 11 18:45:28 2008 +0800 |
| |
| TSEC: Add the support for RealTek RTL8211B PHY |
| |
| Add the support of RealTek RTL8211B PHY, the RTL8211B |
| PHY only supports RGMII and MII mode. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 84a3047b72b70e862b0b7a8e2058077457f89a32 |
| Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| Date: Wed Jan 16 09:40:41 2008 +0100 |
| |
| Remove annoying debug printout for PHY less boards. |
| |
| PHY less board prints out lots of "read wrong ...": |
| read wrong value : mii_id 3,mii_reg 2, base e0102320 |
| read wrong value : mii_id 3,mii_reg 3, base e0102320 |
| UEC: PHY is Generic MII (ffffffff) |
| read wrong value : mii_id 3,mii_reg 4, base e0102320 |
| read wrong value : mii_id 3,mii_reg 0, base e0102320 |
| read wrong value : mii_id 3,mii_reg 1, base e0102320 |
| read wrong value : mii_id 3,mii_reg 1, base e0102320 |
| read wrong value : mii_id 3,mii_reg 5, base e0102320 |
| read wrong value : mii_id 3,mii_reg 1, base e0102320 |
| read wrong value : mii_id 3,mii_reg 1, base e0102320 |
| read wrong value : mii_id 3,mii_reg 5, base e0102320 |
| FSL UEC0: Full Duplex |
| FSL UEC0: Speed 100BT |
| FSL UEC0: Link is up |
| Using FSL UEC0 device |
| |
| Make this printout depend on UEC_VERBOSE_DEBUG and |
| remove its definition in uec_phy.c |
| |
| Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit ee62ed3286f83b98b7785e0318dc6379e78f7ff6 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jan 15 14:11:00 2008 -0600 |
| |
| net: reduce boot latency on QE UEC based boards |
| |
| actually polling for PHY autonegotiation to finish enables us to remove the |
| 5 second boot prompt latency present on QE based boards. |
| |
| call to qe_set_mii_clk_src in init_phy, and mv call to init_phy from |
| uec_initialize to uec_init by Joakim Tjernlund; autonegotiation wait |
| code shamelessly stolen from tsec driver. |
| |
| also rm unused CONFIG_RMII_MODE code. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 55fe7c57a8b99a130925052dcdbb77f053dc50e3 |
| Author: michael.firth@bt.com <michael.firth@bt.com> |
| Date: Wed Jan 16 11:40:51 2008 +0000 |
| |
| TSEC driver: Change MDIO support to allow access to any PHYs on the MDIO bus |
| |
| The current TSEC driver limits MDIO access to the devices that have been configured as attached |
| to a TSEC MAC. This patch allows access to any PHY device on the MDIO bus through the 'mii' commands. |
| |
| Signed-off-by: Michael Firth <michael.firth@bt.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 5e918a98c26e8ab9b5d2d48d998a2ced2b5b85b3 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Jan 16 00:38:05 2008 -0600 |
| |
| Add support for the MPC837xERDB |
| |
| MPC837xERDB board support includes: |
| * DDR2 330MHz hardcoded (soldered on the board) |
| * Local Bus NOR Flash |
| * I2C, UART and RTC |
| * eTSEC RGMII (TSEC0 - RTL8211B with MII; |
| * TSEC1 - VSC7385 local bus, hardcoded, requires seperate firmware |
| * load) |
| |
| Signed-off-by: Kevin Lam <kevin.lam@freescale.com> |
| Signed-off-by: Joe D'Abbraccio <joe.d'abbraccio@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Jan 16 12:06:16 2008 -0600 |
| |
| mpc83xx: add support for more system clock performance controls |
| |
| System registers that are modified are the Arbiter Configuration |
| Register (ACR), the System Priority Control Register (SPCR), and the |
| System Clock Configuration Register (SCCR). |
| |
| Signed-off by: Michael F. Reiss <Michael.F.Reiss@freescale.com> |
| Signed-off by: Joe D'Abbraccio <ljd015@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 16c3cde050e2d243e62b37486f1558570787beb8 |
| Author: James Yang <james.yang@freescale.com> |
| Date: Wed Jan 16 11:58:08 2008 -0600 |
| |
| FSL: Generalize PIXIS reset command parsing. |
| |
| Before, the order of arguments to the pixis_reset |
| command needed to be supplied in a hard-coded order. |
| Generalize the command parsing to allow any order. |
| |
| Signed-off-by: James Yang <james.yang@freescale.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ad8f8687b78c3e917b173f038926695383c55555 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jan 15 13:42:41 2008 -0600 |
| |
| FSL: Convert board/freescale/common/Makefile to use CONFIG_ |
| |
| Convert the board/freescale/common/Makefile to use |
| CONFIG_* options to select which files to conditionally |
| compile into the board/freescale/common library rather |
| than conditionally compiling entire files. |
| |
| Now handles:: |
| CONFIG_FSL_PIXIS |
| CONFIG_FSL_DIU_FB |
| CONFIG_PQ_MDS_PIB |
| |
| CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7c2221eb230372a9e537c4f6636b147b0909325f |
| Author: Roy Zang <tie-fei.zang@freescale.com> |
| Date: Tue Jan 15 16:38:38 2008 +0800 |
| |
| Use CONFIG_ULI526X as MPC8610HPCD default Ethernet driver |
| |
| Use driver/net/uli526x.c as MPC8610HPCD default Ethernet driver. |
| Remove unused ethernet CONFIG_ options. |
| |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 711a7946277d2e29af481011e8635e9975c54e45 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jan 15 14:05:14 2008 -0600 |
| |
| mpc83xx: fix QE ETHPRIMEs to correct 'FSL UEC0' value |
| |
| continuation of commit b96c83d4ae475a70ef2635cd0e748174c44c8601 |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 363eea9ff7f19a2cba17f262bd17559f166e134e |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jan 15 09:51:12 2008 -0600 |
| |
| mpc83xx: clean up mpc8360emds.c warnings |
| |
| mpc8360emds.c: In function 'ft_board_setup': |
| mpc8360emds.c:327: warning: assignment makes pointer from integer without a cast |
| mpc8360emds.c:329: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast |
| mpc8360emds.c:334: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast |
| mpc8360emds.c:341: warning: assignment makes pointer from integer without a cast |
| mpc8360emds.c:343: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast |
| mpc8360emds.c:348: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit f09880ea72a1c806db223ce594c5fb1b6542ff6a |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Mon Jan 14 16:14:46 2008 -0600 |
| |
| mpc83xx: fix phy-connection-type fixup code |
| |
| use tree passed to us in local blob, not global fdt. |
| |
| Also use fdt_path_offset to convert to relative offset, since absolute |
| reference is needed to check for rgmii-id mode string value. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 2b4c952be7c4357a13e839d48df80853820c33eb |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Jan 14 09:01:40 2008 -0600 |
| |
| mpc83xx: fix mpc8313/mpc8315/mpc8349itx Makefiles for silent build (with -s) |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit e1d8ed2c08da14b168658cc5fa78529d461aea70 |
| Author: Poonam Aggrwal <b10812@freescale.com> |
| Date: Mon Jan 14 09:41:14 2008 +0530 |
| |
| Changes in uboot DDR configuration for MPC8313eRDB |
| |
| These changes were identified by HighSmith Bill ,Mazzyar and Joseph for |
| DDR configuration in u-boot code. Some are related to performance, some |
| affect stability and some correct few basic errors in the current |
| configuration. |
| |
| The changes have been tested and found to give better memory latency |
| figures on MPC8313eRDB.LMBench figures prove it. |
| |
| The changes are: |
| |
| - CS0_CONFIG[ AP_n_EN] is changed from 1 to 0 |
| (this may improve performance for application with many read |
| or write to open pages). |
| - CS0_CONFIG[ODT_WR_CFG] is currently changed from 100 to |
| 001 (activating all the CS when only one is used may cause |
| unwanted noise on the system) |
| |
| - TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 8clks (based on |
| Tras=45ns) |
| - TIMING_CFG_1[REFREC] changed from 21 clks to 18clks. |
| |
| - TIMING_CFG_2[AL] value changed from 0 setting to 1 clk to |
| comply with the 3 ODT clk requirements) |
| - TIMING_CFG_2[CPO] was set to a reserved value, changed to RL+3/4. |
| - TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 6clks. |
| |
| - DDR_SDRAM_MODE[AL]changed from 0 to 1. |
| - DDR_SDRAM_MODE[WRREC] changed from 1 clk to 3 clks. |
| |
| - DDR_SDRAM_INTERVAL[REFINT] is changed from 0x0320 to 0x0510. |
| - DDR_SDRAM_INTERVAL[BSTOPRE] is changed from 0x64 to 0x0500. |
| |
| The patch is based of git://www.denx.de/git/u-boot-mpc83xx.git |
| The last commit on this tree was 6775c68683a53c7abc778774641aac6f833a2cbf |
| |
| Signed-off-by: Poonam Aggrwal-b10812 <b10812@freescale.com> |
| Cc: Bill HighSmith <Bill.Highsmith@freescale.com> |
| Cc: Razzaz Mazyar <MRazzaz@freescale.com> |
| Cc: Josep P J <PJ.Joseph@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit b5cdd7df4a06edb91539c9a2ea7c178a870c3a95 |
| Author: Jerry Van Baren <gvb.uboot@gmail.com> |
| Date: Sat Jan 12 13:24:14 2008 -0500 |
| |
| Enable the isdram command on the MPC8360EMDS board |
| |
| The isdram command prints out decoded information the "serial presence |
| detect" (SPD) chip on the SDRAM SIMMs. This can be very helpful when |
| debugging memory configuration problems. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 8bd522ce4afda3d4868ee8c913f5394094326be1 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Fri Jan 11 18:48:24 2008 +0800 |
| |
| mpc83xx: Add the support for MPC8315ERDB board |
| |
| The features list: |
| - Boot from NOR Flash |
| - DDR2 266MHz hardcoded configuration |
| - Local bus NOR Flash R/W operation |
| - I2C, UART, MII and RTC |
| - eTSEC0/1 support |
| - PCI host |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit b05884efa614e4d8a9413158fc228e0dc02ab704 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Fri Jan 11 18:46:50 2008 +0800 |
| |
| mpc83xx: Add config of eTSEC emergency priority in SPCR |
| |
| The TSEC emergency priority definition of 831x/837x |
| is different than the definition of 834x in SPCR register. |
| |
| Add the other config of TSEC emergency priority into |
| cpu_init.c |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 9b958234b0783f13d92f007f753fd2c3ae2c8680 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Fri Jan 11 18:42:19 2008 +0800 |
| |
| mpc83xx: Remove cache config from MPC8360ERDK.h |
| |
| The MPC8360ERDK board support patch is added before |
| the commit 2c5b48fc205c3e2752910da8f39209ed075929e5 |
| so, miss clean up it. |
| |
| The patch clean up the miss cache config. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit cd9d23053d435c08fc8695017b5cb9003fcda786 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Jan 14 23:09:32 2008 +0300 |
| |
| nand: FSL UPM NAND driver |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 6cb2239ae76faee64434286c4f8fc71374702dd2 |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Tue Jan 15 08:59:44 2008 +0900 |
| |
| OneNAND: Separate U-Boot dependent code from OneNAND |
| |
| OneNAND: Separate U-Boot dependent code from OneNAND |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit 83a49c8dd7998be2d1f0d420597a36bbf0bf4164 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Wed Jan 16 10:33:46 2008 +0100 |
| |
| ppc4xx: Sequoia coding style cleanup and beautification |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 4b3cc6ece9c455504cf12909fae38d085d848ac0 |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Tue Jan 15 14:35:58 2008 -0500 |
| |
| ppc4xx: Refactor ECC POST for AMCC Denali core |
| |
| The ECC POST reported intermittent failures running after power-up on |
| the Korat PPC440EPx board. Even when the test passed, the debugging |
| output occasionally reported additional unexpected ECC errors. |
| |
| This refactoring has three main objectives: (1) minimize the code |
| executed with ECC enabled during the tests, (2) add more checking of the |
| results so any unexpected ECC errors would cause the test to fail, and |
| (3) use synchronization (only) where required by the processor. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 2465665b73ac2f688af945b1ed510752afa816a4 |
| Author: David Saada <David.Saada@ecitele.com> |
| Date: Tue Jan 15 10:40:24 2008 +0200 |
| |
| QE UEC: Extend number of supported UECs to 4 |
| |
| This patch extends the number of supported UECs to 4. Note that the |
| problem of QE thread resources exhaustion is resolved by setting the |
| correct number of QE threads according to Ethernet type (GBE or FE). |
| |
| Signed-off-by: David Saada <david.saada@ecitele.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 58d204256cb1ce1bd323847d9f644acf70a72e6a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 16 00:01:01 2008 +0100 |
| |
| LWMON5: enable hush shell as command line parser |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 66ffb1883feedddc813d8a507d060f2a940eb2b2 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Jan 15 17:22:28 2008 +0100 |
| |
| ADS5121: disable watchdog; enable image timestamps |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 2b4f778fe9d1de61d7445bae7b325340aba6968d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Jan 15 17:21:28 2008 +0100 |
| |
| TK885D: fixes for bigger flash sector sizes on new modules; |
| adjust default environment; |
| disable SCC ethernet (not used on this board). |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f91d7ae5ca89acf9fa1ed1015dc078cf29581607 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Tue Jan 15 17:48:13 2008 +0900 |
| |
| pcmcia: Remove CONFIG_COMMANDS from marubun pcmcia driver |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 76e49aa7fb8e76cc49092c1acd53fff921e26360 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Tue Jan 15 23:25:25 2008 +0900 |
| |
| sh: Add support SH7710/SH7712 |
| |
| SH7710/SH7712 of SH3 CPU are supported. |
| SH771X is called SH-Ether, and has the Ether controller in CPU. |
| The driver of Ether is not included in this patch. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 63a11be68306870e04d3851ed9fa41955cdf4894 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Tue Jan 15 23:06:17 2008 +0900 |
| |
| sh: Add support of map_physmem() and unmap_physmem() to SuperH |
| |
| This patch add the support of map_physmem() and unmap_physmem() |
| used with Common Flash Interface(CFI) driver. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit db3995fe5164ac5d630b7ecb96286a9828dfbb54 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Wed Jan 9 14:42:27 2008 +0900 |
| |
| sh: Add maintainer of MS7720SE to the MAINTAINER file |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit dcd99e88e03d56a0aeecd42b507d2d29d20ab0e3 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Wed Jan 9 14:39:58 2008 +0900 |
| |
| sh: Fix board name in MS7720SE's config.mk |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit c0a04d93734d768b39dbb72fb501b65614c8615d |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Wed Jan 9 14:37:36 2008 +0900 |
| |
| sh: Add MS7720SE to MAKEALL |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit b2b5e2bb78a1ef4ae8504f5a26bfdc3293ea74ae |
| Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
| Date: Mon Dec 3 22:58:50 2007 +0900 |
| |
| sh: Add support for MS7720RP02 board |
| |
| Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
| CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 7c10c57275901939a8ece4a9ef3e7ccb7c12a0ed |
| Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
| Date: Wed Jan 9 14:30:02 2008 +0900 |
| |
| sh: Add support for SH7720 in serial_sh driver. |
| |
| Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
| CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit f9913a8ee71ff14fcfc1c7fd0e6912f897e69403 |
| Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
| Date: Mon Dec 3 22:58:45 2007 +0900 |
| |
| sh: Add support SH3 and SH7720 |
| |
| Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
| CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 9adfc9fb9ade64cdf1ed9ff842e4f900cbda78bd |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jan 15 10:11:02 2008 +0100 |
| |
| ppc4xx: Remove compiler warning in cpu/ppc4xx/44x_spd_ddr2.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 17bef68097ab3692500a36fb31115bff7910aa99 |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Mon Jan 14 14:04:42 2008 +0100 |
| |
| ppc_4xx: Fix post spr.c for PPC405 |
| |
| post/cpu/ppc4xx/spr.c contained a few checks for registers only present |
| for PPC440 and derivates processor. |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 06c428bcd4413014b43236e77765022071424fa6 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Mon Jan 14 11:12:01 2008 +0800 |
| |
| QE: fix compile warning |
| |
| qe.c: In function 'qe_upload_firmware': |
| qe.c:390: warning: pointer targets in passing argument 2 |
| uec.c: In function 'uec_initialize': |
| uec.c:1236: warning: 'uec_info' may be used uninitialized |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit a0dd99d51efa55fe023e19c97ead92683725eb11 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jan 14 10:05:05 2008 +0100 |
| |
| ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit |
| |
| Now that bit 29 is the USB PHY reset bit, update the Kilauea port |
| to remove the USB PHY reset after powerup. The CPLD will keep the |
| USB PHY in reset (active low) until the bit is set to 1 in |
| board_early_init_f(). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f43ad53908f1ea83a7c26c3505bbe84382e47aad |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jan 13 23:26:45 2008 +0100 |
| |
| ARM: update mach-types.h from 2.6.24-rc7 Linux kernel tree |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 8d103071b7b0e3ec888859bfcb9d422565e6d750 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jan 13 23:37:50 2008 +0100 |
| |
| ADS5121: Fix typo in ads5121.c, adjust default environment |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 51b67d06faa670c65de6f29ec5b5aace74b2a047 |
| Author: John Rigby <jrigby@freescale.com> |
| Date: Fri Aug 24 18:18:43 2007 -0600 |
| |
| ADS5121: MAX slew rate for PATA pins |
| |
| Signed-off-by: John Rigby <jrigby@freescale.com> |
| |
| commit dd531aac34aaad138f16cacdb51d61908d59c0e2 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jan 13 21:05:52 2008 +0100 |
| |
| Fix Makefile dependency problem with parallel builds. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 89967841e3ea02e3d0e5e1295ab687576e5b1089 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jan 13 19:51:39 2008 +0100 |
| |
| MPC8544DS: fix board Makefile for silent build (with -s) |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 6d714f82fb4b8bb7e267e9c71b8009bc670bfe88 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jan 13 16:44:08 2008 +0100 |
| |
| PMC440 board: fix board Makefile for out-of-tree building |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 6eb3fb15588d319bd3099d5f9b910051dfeab6b2 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jan 13 16:07:44 2008 +0100 |
| |
| Makalu: fix compile warning |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 0a1e03bcadc7734688a21e8dd2e46a4f608193c0 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Jan 13 12:36:12 2008 +0100 |
| |
| cmd_nand : fix compiler warning. |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 8225d1e3ac0ab147cdde4b0042812583380afb8a |
| Author: Michael Schwingen <rincewind@discworld.dascon.de> |
| Date: Sat Jan 12 20:29:47 2008 +0100 |
| |
| CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation |
| |
| Signed-off-by: Michael Schwingen <michael@schwingen.org> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 2b2f43ed6a30ece77f76191c845ac95267daa31a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jan 13 02:19:44 2008 +0100 |
| |
| MPC8360ERDK: fix incorrect initialization of CFG_I2C_NOPROBES |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 08e99e1dd01a3e0e3dc3a7138eb827c997e2b74d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jan 13 02:19:13 2008 +0100 |
| |
| MPC8xx FEC driver: fix compiler warning. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit ae6d1056d2c2e4d1266413c0ae8a6d5529ecde4b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jan 13 00:59:21 2008 +0100 |
| |
| Fix Makefile dependencies issues; allow silent build |
| |
| - get rid of "version" target whichdidn't really work |
| - make autoconf.mk depend on version_autogenerated.h to make sure |
| to rebuild files as needed |
| - add XECHO macro to allow for silent build using "make -s" |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e343ab83d5135b558aa58db9be8fc7faa68d77ed |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jan 13 00:55:47 2008 +0100 |
| |
| ADS5121e: fix compile warning |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f2b6f4610627fe3d607620e25082916a01538875 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Jan 13 00:55:18 2008 +0100 |
| |
| MUNICes: fix board Makefile for remote build directory |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 2ad4d3999fe801aa716221d7d9a4c5bdad74783a |
| Author: Oliver Weber <almoeli@gmx.de> |
| Date: Wed Jan 9 17:04:38 2008 +0100 |
| |
| MPC5200: don't use hardcoded MBAR address in Bestcomm firmware |
| |
| Signed-off-by: Oliver Weber <almoeli@gmx.de> |
| |
| commit 00ac50e348d1bace27a174b7f528d113bc7cdf7f |
| Author: Andreas Engel <andreas.engel@ericsson.com> |
| Date: Wed Jan 9 17:10:56 2008 +0100 |
| |
| Make bootretry work when command line editing is enabled |
| |
| Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work. |
| This patch fixes the problem. |
| |
| Signed-off-by: Andreas Engel <andreas.engel@ericsson.com> |
| |
| commit 632de0672d3c3ab53ad798c47f5f1eb26008a0e4 |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Fri Jan 11 23:26:18 2008 -0500 |
| |
| Refactor code for "i2c sdram" command |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 0df6b8446c4721b91ce311548114891130371083 |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Thu Jan 10 22:23:39 2008 -0500 |
| |
| Fix "i2c sdram" command for DDR2 DIMMs |
| |
| Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the |
| "i2c sdram" command. This patch provides correct alternative |
| interpretations when DDR2 memory is detected. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 64134f011254123618798ff77c42ba196b2ec485 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Jan 12 20:31:39 2008 +0100 |
| |
| Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections |
| |
| With recent toolchain versions, some boards would not build because |
| or errors like this one (here for ocotea board when building with |
| ELDK 4.2 beta): |
| ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab] |
| |
| For many boards, the .bss section is big enough that it wraps around |
| at the end of the address space (0xFFFFFFFF), so the problem will not |
| be visible unless you use a 64 bit tool chain for development. On |
| some boards however, changes to the code size (due to different |
| optimizations) we bail out with section overlaps like above. |
| |
| The fix is to add the NOLOAD attribute to the .bss and .sbss |
| sections, telling the linker that .bss does not consume any space in |
| the image. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 3afac79ec27b91df185f090b31dad9620779f440 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Fri Jan 11 20:42:58 2008 -0600 |
| |
| USB: Add Philips 1561 PCI-OHCI ids |
| (needed for M5475EVB) |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 5e8def6731cd7bec74bff42a16b139de04010353 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Jan 12 15:51:34 2008 +0100 |
| |
| Add MAINTAINERS entries for ids8247, jupiter, municse, sc3 and uc101 |
| boards. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5d49e0e152a8b81cc0602271e8fd259371f559b7 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Fri Jan 11 12:03:43 2008 +0100 |
| |
| MPC512X: Cleanup bus clock names. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit 66a9455b6bf46d69cec5c88d1a600d1d9a10670d |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Tue Jan 8 17:16:59 2008 +0100 |
| |
| MPC512X: Fixed typo in macro name. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit 281ff9a45cf9eb17b8a9afc436cb783cf1f62363 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Tue Jan 8 17:16:15 2008 +0100 |
| |
| ads5121: Added support for FDT. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit a10ff9196183e7e5f2ae3c4f5f3cbe92ae9cb719 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Jan 12 01:05:50 2008 +0100 |
| |
| Coding Style cleanup; update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f6db945649e5e9d0c7efe33b507d243cdc86cf03 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Jan 11 15:15:17 2008 +0100 |
| |
| Fixed syntax error in function init_e300_core() of mpc83xx/start.S if |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit fa05664cd8c7ab1ecf062aa73b992b7b58bba49c |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Jan 11 15:15:16 2008 +0100 |
| |
| MUNICes: Set the right CFG_DEFAULT_MBAR value. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 5fb2b2342ece8d786c6f7fdba1bc273febd3b3d2 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Jan 11 15:15:15 2008 +0100 |
| |
| added the config File for the MUNICes board. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 6341d9d723b71b4c0bf86f979e4cb228c02fd09d |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Jan 11 15:15:14 2008 +0100 |
| |
| added basic support for the MUNICes board. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 3bb77fb09a1caabf5a292cc5b486a78b977fbe19 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Jan 12 00:39:37 2008 +0100 |
| |
| Update CHANGELOG and MAINTAINERS files. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5ba7390c3cb579172be66888a371707b47b5be4e |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Fri Jan 11 02:15:02 2008 +0100 |
| |
| Fix compilation problem in common/cmd_bmp.c |
| |
| common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP |
| isn't defined. This patch fix this. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 5aa437baae5fe629abeab99bef793a2a1fc71b58 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Jan 11 01:12:09 2008 +0100 |
| |
| Fix defaultconfig for the mgcoge board. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit ac9db066b26935f31bff15c98168b19faeb603f3 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Jan 11 01:12:08 2008 +0100 |
| |
| Added support for the mgcoge board from keymile. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit b423d055cc2e13c4ef1f0389c3fa2988d0eed818 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Jan 11 01:12:07 2008 +0100 |
| |
| Enable SMC microcode relocation patch for SMC1. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 381e4e639720d8d2efb8066c7c48ec9588cb28c7 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Fri Jan 11 01:12:06 2008 +0100 |
| |
| Added support for the mgsuvd board from keymile. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit bf05293973b348f6946c9df92cd3c65ece42d0be |
| Author: James Yang <james.yang@freescale.com> |
| Date: Thu Jan 10 16:02:07 2008 -0600 |
| |
| Fix 64-bit vsprintf. |
| |
| There were some size and unsigned problems. |
| Also add support for "ll" size modifier in format string like glibc |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 92fa37eac530860643afa26ae347af3d23d67309 |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Wed Jan 9 12:42:35 2008 -0500 |
| |
| Remove superfluous preprocessor conditionals from LM73 driver |
| |
| (1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE". |
| |
| (2) Use conditional Makefile.o. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit efc6f447c1b940d1650c4b854c5598a595ddc3da |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Thu Jan 10 17:59:07 2008 +0100 |
| |
| Add support for the TK885D baseboard from TELE-DATA |
| |
| The TK885D board uses a TQM885D module from TQ, this port adds an |
| own configuration file and adds a last_stage_init() method to |
| configure the two PHYs, depending on the phy_auto_nego environment |
| variable. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 0ec595243dc99edcd248bbcfbfd5a1dc860bde89 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Jan 10 02:22:05 2008 -0600 |
| |
| Fix compiler warning |
| |
| main.c: In function 'readline_into_buffer': |
| main.c:927: warning: unused variable 'p_buf' |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit bed53753dd1d7e6bcbea4339be0fb7760214cc35 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Fri Jan 11 14:30:01 2008 +0100 |
| |
| Add Fujitsu CoralP/Lime video driver |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| |
| commit 20c450ef61ef2eb1c96f9b59ba0eb8d849bba058 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Fri Jan 11 02:39:47 2008 +0100 |
| |
| Fix video console newline and carriage return handling |
| |
| Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS |
| are not displayed correctly. This is an attempt to fix |
| this issue. Also add carriage return handling. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| |
| commit d5a163d6baa04f5a8edcc10ebc6fad08657d3093 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jan 11 15:53:58 2008 +0100 |
| |
| ppc4xx: Fix sdram init on Sequoia boards |
| |
| Clear possible errors in MCSR resulting from data-eye-search. |
| If not done, then we could get an interrupt later on when |
| exceptions are enabled. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d610a60730b7464f6f659db49d264d89a7c71061 |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Fri Jan 11 15:31:09 2008 +0100 |
| |
| ppc4xx: Rework Lime support for lwmon5 |
| |
| Rework Lime support for lwmon5 using new video driver |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit ff41ffc93c1592e77a44bdbebd5d781739f3aae0 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Jan 11 14:55:16 2008 +0100 |
| |
| ppc4xx: Update PMC440 config file |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit e3edcb36f14f0aabb6f50e96014d6877f73d64ea |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Jan 11 14:55:08 2008 +0100 |
| |
| ppx4xx: Fix sdram init on PMC440 boards |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 061aad4d320dddce26247699dcf2875ee2ea1366 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Jan 10 23:09:33 2008 +0800 |
| |
| mpc83xx: Fix the bug of 266MHz data rate DDR |
| |
| The DDR doesn't work on the 266MHz data rate, |
| the patch fix the bug. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit ded08317ad9e340b887bf2eb46e9565a0f610a93 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Jan 10 23:08:26 2008 +0800 |
| |
| mpc83xx: Make the code more readable |
| |
| Format the code, make it more readable |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 7e74d63d1a211fbc34ec424e2dc6726601f323d0 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Jan 10 23:07:23 2008 +0800 |
| |
| mpc83xx: Reduce the latency of DDR |
| |
| Reduce the AL from 2 to 1 clock to improve the performance. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 6f3931a2bed5412c20d5e5536c865fbd657f7d28 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Jan 10 23:06:05 2008 +0800 |
| |
| mpc83xx: Fix the wrong definition of MPC8315E |
| |
| According to the latest user manual of MPC8315E, |
| 1) The SVCOD of HRCWL is different than 837x |
| 2) The SCCR has changes |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit ec2638ea08a537a1bd409db873aaaa33a053ebae |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Jan 10 23:05:00 2008 +0800 |
| |
| mpc83xx: Fix the typo in mpc83xx.h |
| |
| The SPCR about TSEC priority is wrong. |
| |
| Signed-off-by: Michael Barkowski <Michael.Barkowski@freescale.com> |
| Signed-off-by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com> |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit c86ef2cd9ef81935049231fa89f36c7b793f2d4b |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Jan 10 23:04:13 2008 +0800 |
| |
| mpc83xx: Fix the typo in global data struct |
| |
| Fix the typo in global_data.h |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 2c5b48fc205c3e2752910da8f39209ed075929e5 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Jan 10 23:03:03 2008 +0800 |
| |
| mpc83xx: Remove cache config from config.h |
| |
| clean up the cache config from configs.h of board |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit fab6f556bbbbd1bb35a5433161f7f173c18df559 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Wed Jan 9 20:57:47 2008 +0300 |
| |
| mpc83xx: add support for the MPC8360E-RDK |
| |
| This is MPC8360E based board with: |
| - 256MB fixed SDRAM; |
| - 8MB Intel Strata NOR flash; |
| - StMICRO 64MiB NAND flash; |
| - two 10/100/1000 ethernet ports connected via Broadcom |
| BCM5481 PHYs; |
| - two 10/100 ethernet ports connected via National |
| DP83848 PHYs; |
| - one PCI and one miniPCI slots; |
| - four serial ports (two NS16550-compatible, two UCCs); |
| - four USB ports working through MPC8360E "FHCI" USB controller; |
| - Fujitsu MB86277 graphics controller; |
| - Analog to Digital Converter/Touchscreen controller, AD7843 |
| connected to SPI. |
| |
| Features not supported in this patch are: |
| - StMICRO 64MiB NAND flash (patch sent); |
| - MINT framebuffer initialization (patch is pending); |
| - Fetching production information from the EEPROM via I2C; |
| - FHCI USB; |
| - Two slow UCCs used as RS-485 UARTs. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit b3d2cde7a3aa1e83b7968cdff929e52c8cc617bb |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Wed Jan 9 20:57:40 2008 +0300 |
| |
| mpc83xx: add "fsl, qe" compatible fixups |
| |
| New device trees will use "fsl,qe" compatible properties. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 977b57583a7c34010e566a09a679ec3c1836f996 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Jan 9 15:24:06 2008 -0600 |
| |
| mpc83xx: add missing CONFIG_HAS_ETH0 defines |
| |
| the new libfdt code only updates eth0 if CONFIG_HAS_ETH0 |
| is defined; add the define to the missing board configs. |
| |
| Thanks to Emilian Medve for finding this. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit b830b7f1635984ba607219fcbd78597c28eeb529 |
| Author: Becky Bruce <bgill@freescale.com> |
| Date: Thu Jan 10 14:00:28 2008 -0600 |
| |
| 86xx: Support 2GB DIMMs |
| |
| Configure the number of bits used to address the banks inside the SDRAM |
| device. The default register value of 0 means 2 bits to address 4 banks. |
| Higher capacity devices like a 2GB DIMM require 3 bits to address 8 banks. |
| |
| Signed-off-by: Becky Bruce <bgill@freescale.com> |
| |
| commit 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Thu Jan 10 18:50:33 2008 +0100 |
| |
| ppc4xx: Make Sequoia boot vxWorks |
| |
| vxWorks expects in |
| TLB 0 a entry for the Machine Check interrupt |
| TLB 1 a entry for the RAM |
| TLB 2 a entry for the EBC |
| TLB 3 a entry for the boot flash |
| |
| After changing the baudrate to 9600 I had no problems to boot the |
| vxWorks image as distributed by WindRiver (Revision 2.0/1 from |
| June 18, 2007) |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 6d8184b00c0d1d7090e4a2f514e310d98a394f8d |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Wed Jan 9 23:10:27 2008 -0500 |
| |
| ppc4xx: Fix dflush() to restore DVLIM register |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 252f60b068d1f94190b5bcfda169db582387e15e |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Thu Jan 10 03:52:44 2008 -0500 |
| |
| Nios2: remove common/cmd_bdinfo.c unused variable. |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Scott McNutt <smcnutt@psyent.com> |
| |
| commit 422b1a01602b6e2fbf8444a1192c7ba31461fd4c |
| Author: Ben Warren <biggerbadderben@gmail.com> |
| Date: Wed Jan 9 18:15:53 2008 -0500 |
| |
| Fix Ethernet init() return codes |
| |
| Change return values of init() functions in all Ethernet drivers to conform |
| to the following: |
| |
| >=0: Success |
| <0: Failure |
| |
| All drivers going forward should return 0 on success. Current drivers that |
| return 1 on success were left as-is to minimize changes. |
| |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Acked-by: Kim Phillips <kim.phillips@freescale.com> |
| Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Acked-By: Timur Tabi <timur@freescale.com> |
| |
| commit d3a6532cbe263d992f49e86ac95bede28e96f9c8 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Jan 10 00:55:14 2008 +0100 |
| |
| Coding Style cleanup; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 17a41e4492121ccf9fa2c10c2cb1a6d1c18d74f7 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Jan 9 16:56:54 2008 -0600 |
| |
| Add QE brg freq and correct qe bus freq fdt update code |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 890dfef06c2d169a3356359596890754dfb8ee1c |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Jan 9 16:34:51 2008 -0600 |
| |
| Remove cache config from ATUM8548 and sbc8548 configs |
| |
| These boards weren't updated by Kumar's config patch because they |
| weren't in the tree, yet. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit b8ec2385038c094b07ec5b49336289a46b6e9cc6 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Mon Jan 7 13:31:19 2008 -0600 |
| |
| 85xx: add ability to upload QE firmware |
| |
| Define the layout of a binary blob that contains a QE firmware and instructions |
| on how to upload it. Add function qe_upload_firmware() to parse the blob and |
| perform the actual upload. Add command-line command "qe fw" to take a firmware |
| blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the |
| 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define |
| 'struct rsp' in immap_qe.h to include the actual RISC Special Registers. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit b009f3eca99bb7b9e6ba6639a8909a138dd5e9fe |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Jan 8 01:22:21 2008 -0600 |
| |
| 85xx: Remove cache config from configs.h |
| |
| Either use the standard defines in asm/cache.h or grab the information |
| at runtime from the L1CFG SPR. |
| |
| Also, minor cleanup in cache.h to make the code a bit more readable. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit b964e9368f45372aaf1da0c13fe56f6d81ae8e96 |
| Author: robert lazarski <robertlazarski@gmail.com> |
| Date: Fri Dec 21 10:39:27 2007 -0500 |
| |
| mpc85xx: Add support for ATUM8548 (updated) |
| |
| Add support for Instituto Atlantico's ATUM8548 board |
| |
| Signed-off-by: robert lazarski <robertlazarski@gmail.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 7bd6104b71de9bca80ac8e0936003443bb42f2fc |
| Author: robert lazarski <robertlazarski@gmail.com> |
| Date: Fri Dec 21 10:36:37 2007 -0500 |
| |
| mpc85xx: Add support for ATUM8548 (updated) |
| |
| Add support for Instituto Atlantico's ATUM8548 board |
| |
| Signed-off-by: robert lazarski <robertlazarski@gmail.com> |
| |
| commit 9e3ed392d2c8965e24c942b58796c31c644c2f70 |
| Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Date: Thu Dec 13 06:45:14 2007 -0600 |
| |
| mpc85xx: Add support for SBC8548 (updated) |
| |
| Add support for Wind River's SBC8548 reference board. |
| |
| Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| |
| commit 11c45ebd46d6517b51b7a92dd52a618b2f4e5586 |
| Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Date: Thu Dec 13 06:45:08 2007 -0600 |
| |
| mpc85xx: Add support for SBC8548 (updated) |
| |
| Add support for Wind River's SBC8548 reference board. |
| |
| Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Signed-off by: Andy Fleming <afleming@freescale.com> |
| |
| commit 64d4bcb087c2ece1c4d0de8efe85e0075e5b1594 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Oct 22 19:58:19 2007 +0400 |
| |
| MPC8568E-MDS: set up QE pario for UART1 |
| |
| To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should |
| be set up appropriately. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit ad162249cb371e9e38971676f09be791e5f3cf4a |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Mon Oct 22 18:12:46 2007 +0400 |
| |
| MPC8568E-MDS: reset UCCs to use them reliably |
| |
| In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset |
| UCCs. |
| |
| p.s Similar code exists in the Linux kernel board file (for capability |
| reasons with older U-Boots), but should be removed some day. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit 2146cf56821c3364786ca94a7306008c5824b238 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Dec 19 01:18:15 2007 -0600 |
| |
| Reworked FSL Book-E TLB macros to be more readable |
| |
| The old macros made it difficult to know what WIMGE and perm bits |
| were set for a TLB entry. Actually use the bit masks for these items |
| since they are only a single bit. |
| |
| Also moved the macros into mmu.h out of e500.h since they aren't specific |
| to e500. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 1d47273d46925929f8f2c1913cd96d7257aade88 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Dec 18 23:21:51 2007 -0600 |
| |
| Use FSL Book-E MMU macros from Linux Kernel |
| |
| Grab the FSL Book-E MAS register macros from Linux. Also added |
| defines for page sizes up to 4TB and removed SHAREN since it doesnt |
| really exist. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 02df4a270f817ef6ec39047a01b55fecdc5f3b37 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Jan 9 13:51:32 2008 -0600 |
| |
| Fix my own merge stupidity |
| |
| Way back in August I merged Heiko's patch: |
| 566a494f592: [PCS440EP] upgrade the PCS440EP board |
| |
| with Jon's CONFIG_COMMANDS patches. |
| |
| This was done in commit: 6bf6f114dcdd97ec3f80c2761ed40e31229d6b78 |
| |
| However, in the process, I left out some of Heiko's good changes. |
| |
| Now Heiko's and Jon's patches are properly merged in fat_register_device() |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 6636b62a6efc7f14e6e788788631ae7a7fca4537 |
| Author: James Yang <James.Yang@freescale.com> |
| Date: Wed Jan 9 11:17:49 2008 -0600 |
| |
| Expose parse_line() globally. |
| |
| Add new function readline_into_buffer() that allows the |
| output of readline to be put into a pointer to char buffer. |
| |
| This refactoring allows other functions besides the |
| main command loop to also use the same input mechanism. |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7ca90513486abd4ae50bd1b7403f47cc58c5ad25 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Wed Jan 9 01:15:25 2008 +0100 |
| |
| trivial: fix consequences of a bad merge |
| |
| Fix what looks like a merge artifact. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 4785a694c0045996ccf0ac5b8edf531efc1b730e |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Thu Jan 3 10:51:15 2008 +0800 |
| |
| Add Ctrl combo key support to usb keyboard driver. |
| |
| Ctrl combo key support is added, which is very useful to input Ctrl-C |
| for interrupt current job. |
| Also add usb_event_poll() calling to usb_kbd_testc(), which can get |
| key input when tstc() is called. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit 10c7382bc5d5e64c47f94ac2ca78cc574442e82d |
| Author: Marcel Ziswiler <marcel@ziswiler.com> |
| Date: Sun Dec 30 03:30:56 2007 +0100 |
| |
| fix various comments |
| |
| Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> |
| |
| commit 7817cb2083d982923752fe0f12b67c0e7c09a027 |
| Author: Marcel Ziswiler <marcel@ziswiler.com> |
| Date: Sun Dec 30 03:30:46 2007 +0100 |
| |
| fix comments with new drivers organization |
| |
| Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> |
| |
| commit a9b410dc7d2a4721c408b13abfc037988150f145 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Fri Dec 28 12:50:59 2007 +0900 |
| |
| Remove the obsolete terse version of do_mii() |
| |
| We now have more useful version of do_mii() and everybody use it. |
| Gerald Van Baren says: |
| |
| > When I originally wrote the mii command 6(!) years ago, I wrote a |
| > verbose version that printed human readable decomposition of the flags, |
| > etc., and a terse one that didn't print as much stuff and thus had a |
| > smaller memory footprint. |
| > |
| > It sounds like the terse version has withered and died, apparently |
| > people are only using the verbose version (which is very understandable, |
| > I do myself). |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 01c687aa6e065bd4faf80f723361e798941dd6b0 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Thu Dec 27 13:42:56 2007 -0500 |
| |
| Do not reference sha1.c when building mkimage. |
| |
| remove sha1.o from mkimage linking since it isn't actually used. |
| |
| Signed-Off-By: Mike Frysinger <vapier@gentoo.org> |
| |
| commit b9173af73e524d37c812f210173cf83385c5171a |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Thu Dec 27 15:39:54 2007 +0900 |
| |
| common/cmd_mii.c: Add sanity argc check |
| |
| If type mii command without arguments, we suffer from uninitialized argv[] |
| entries; for example we MIPS get stuck by TLB error. |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit 500856eb1707ed17d9204baa61dd59948d3b2899 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Wed Jan 9 19:39:36 2008 +0100 |
| |
| API for external applications. |
| |
| This is an API for external (standalone) applications running on top of |
| U-Boot, and is meant to be more extensible and robust than the existing |
| jumptable mechanism. It is similar to UNIX syscall approach. See api/README |
| for more details. |
| |
| Included is the demo application using this new framework (api_examples). |
| |
| Please note this is still an experimental feature, and is turned off by |
| default. |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit fe8dd0b2220b7c02b0d4c9c4f9967879970477b1 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Jan 9 12:14:55 2008 -0600 |
| |
| 86xx: Remove cache config from configs.h |
| |
| Just use the standard defines in asm/cache.h. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 26a41790f8eba19ad450e18ae91351daf485b3e2 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Wed Jan 9 18:05:27 2008 +0100 |
| |
| Globalize envmatch() |
| |
| The newly introduced API (routines related to env vars) will need to call |
| it. |
| |
| Signed-off-by: Rafal Zabdyr <armo@semihalf.com> |
| |
| commit 1df170f8b2a99e1e2f940f9f0b56511e1e4c9e1f |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Jan 4 12:07:27 2008 -0600 |
| |
| Convert MPC8610HPCD to use libfdt. |
| |
| Assumes the presence of the aliases node in the DTS to |
| locate the pci and serial nodes for fixups. |
| |
| Use consistent fdtaddr and fdtfile in environment variables. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit c9974ab0a4d3731cdb76a7599d9fe9445d764d60 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Jan 4 11:58:23 2008 -0600 |
| |
| 8610: Fix lingering compile warnings. |
| |
| Turn off DEBUG. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 6007f3251c0967adc13f2ed8be1b924ddc30124d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 9 15:14:46 2008 +0100 |
| |
| Coding Style cleanup, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit fc6414eca55f1fc108fb12fc8cdc43bd8b4463f9 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Dec 18 04:29:55 2007 -0500 |
| |
| fix easylogo on big endian dev systems |
| |
| didnt realize how out of shape easylogo actually was until i tried using it. |
| this patch does byte swapping as need be on the input tga header since the tga |
| is in little endian but the host could just as well be big endian. i didnt |
| bother using bswap macros or such stuff from system headers as nothing in |
| POSIX dictates byte swapping functionality. |
| |
| Signed-Off-By: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 38d299c2db81bd889c601b5dfc12c4e83ef83333 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Tue Dec 18 03:23:25 2007 -0500 |
| |
| cleanup easylogo |
| |
| - make the Makefile not suck |
| - include proper headers for prototypes |
| - fix obvious broken handling of strchr() when handling '.' in filenames |
| |
| Signed-Off-By: Mike Frysinger <vapier@gentoo.org> |
| |
| commit 883e3925d99a8dd69c5b0201cba5b1887f88f95c |
| Author: raptorbrino@aim.com <raptorbrino@aim.com> |
| Date: Thu Dec 13 21:23:28 2007 -0500 |
| |
| Fix build problems under Cygwin |
| |
| This patch allows u-boot to build without error in a cygwin |
| environment. Cygwin does not define __u64 in it's |
| include/asm/types.h file. The -idirafter flag in the u-boot |
| build causes the inclusion of the cygwin types.h file as opposed |
| to u-bot/include/asm/types.h file which does define __u64. |
| Subsequently, sha1.c compile fails due to unknown symbol. |
| |
| Signed-off-by: Brian Miller <raptorbrino@netscape.net> |
| |
| commit 43ef1c381f9195504a2488f5cb909227eb97d475 |
| Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com> |
| Date: Fri Nov 30 17:29:59 2007 +0100 |
| |
| cmd_bmp: Add support for displaying gzip compressed bmps |
| |
| The existing code can show information about a gzip compressed BMP |
| image, but can't actually display it. |
| |
| Therefore, move the decompression code out of bmp_info() and use it in |
| bmp_display() as well in order to display a compressed BMP image. |
| |
| Also, clean things up a bit and fix a memory leak while we're at it. |
| |
| [hskinnemoen@atmel.com: a bit of refactoring] |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit d197ffd8172c6fdef38733424640a9a47295d6e9 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Thu Nov 29 21:15:56 2007 +0100 |
| |
| Fix and optimize MII operations on FEC (MPC8xx) controllers |
| |
| This patch fixes several issues at least on a MPC885 based system with two |
| FEC interfaces used in MII mode. |
| |
| 1. PHY discovery should first read PHY_PHYIDR2 register and only then |
| PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it, |
| otherwise the values read are wrong. Also notice, that PHY discovery |
| cannot work on MPC88x / MPC87x in setups with both FECs active at all |
| in its present form, because for both interfaces the registers from FEC |
| 1 are used to communicate over MII. |
| |
| 2. Remove code duplication for resetting the FEC by isolating it into a |
| separate function. |
| |
| 3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init(). |
| |
| 4. Optimize mii_init() to only reset the FEC 1 controller once. |
| |
| 5. Fix a typo in mii_init() using index i instead of j thus potentially |
| leading to unpredictable results. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Tue Nov 20 13:14:20 2007 +0100 |
| |
| Fix endianness conversions in rtl8169 driver |
| |
| It is unclear on what platforms this driver has been tested, since |
| noone up to now defines CONFIG_RTL8169 in the board configuration |
| header. Now it has been fixed for a big-endian mpc8241 based |
| linkstation platform. This patch presents the necessary endianness |
| conversion fixes. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 58694f9709c0c3e3178e349ae748d98cfb0c639a |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Thu Jan 3 10:51:15 2008 +0800 |
| |
| Add Ctrl combo key support to usb keyboard driver. |
| |
| Ctrl combo key support is added, which is very useful to input Ctrl-C |
| for interrupt current job. |
| Also add usb_event_poll() calling to usb_kbd_testc(), which can get |
| key input when tstc() is called. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 07eb02687f008721974a2fb54cd7fdc28033ab3c |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 9 13:43:38 2008 +0100 |
| |
| Coding Style clenaup; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit c26acc1a43b31ddca5add42fd0360ff0eee90c80 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 17:13:11 2007 +0100 |
| |
| Remove bit swapping in Xilinx Spartan bitfile loading |
| |
| This patch removes the unnecessary bit swapping when |
| booting .bit files with the 'fpga loadb' command. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 437fc7327f0611f82937858f2d80e4cd61b40984 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 17:13:05 2007 +0100 |
| |
| Fix MSB check in Xilinx Spartan slave serial mode |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 3bff4ffa33729a42645e328a21e8d16488872958 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 17:12:56 2007 +0100 |
| |
| Add new Xilinx Spartan FPGA types |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 21d39d598c4e74d4e7761608c79dba2715d40a4c |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 17:12:43 2007 +0100 |
| |
| Add pre and post configuration callbacks for Spartan FPGAs |
| |
| This patch adds a post configuration callback for Spartan2/3 FPGAs. |
| pre and post configuration callback are now optional and |
| not called when the function pointer is set to NULL. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 0133502e39ff89b67c26cb4015e0e7e8d9571184 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 17:12:34 2007 +0100 |
| |
| Improve configuration of FPGA subsystem |
| |
| This patch removes the FPGA subsystem configuration through |
| the CONFIG_FPGA bitmask configuration option. |
| |
| See README for the new options: |
| |
| CONFIG_FPGA, |
| CONFIG_FPGA_<vendor>, |
| CONFIG_FPGA_<family> |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 95c6bc7d4a3588b452baca610f8c795a83630477 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 16:55:17 2007 +0100 |
| |
| Add Epson RX8025 RTC support |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 1208a2dfde02bedd3c5bda29a606632b8e0be058 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 16:57:23 2007 +0100 |
| |
| serial: Make default_serial_console() a weak function |
| |
| With this patch it is possible to reimplement default_serial_console() |
| in board specific code. This will be done in the upcomming PMC440 |
| U-Boot port. This also allows the lwmon board maintainer to |
| remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit d16471ee05ce7ac5392bc0e9fe3ff4b58a768f33 |
| Author: Harald Welte <laforge@openmoko.org> |
| Date: Wed Dec 19 14:14:47 2007 +0100 |
| |
| add 'terminal program' functionality |
| |
| This patch adds a 'cu' like serial terminal command to u-boot |
| using which you can access other serial ports from the system console. |
| |
| OpenMoko uses this in their Neo1973 phones to get access to the GSM |
| Modem and GPS chip from the bootloader. |
| |
| Signed-off-by: Harald Welte <laforge@openmoko.org> |
| |
| commit 62d4f4365341576f5a5307b2b205a5aa2e3c6be6 |
| Author: Harald Welte <laforge@openmoko.org> |
| Date: Wed Dec 19 14:12:53 2007 +0100 |
| |
| Re-introduce the 'nand read.oob' and 'nand write.oob' commands |
| that used to exist with the legacy NAND code |
| |
| Signed-off-by: Harald Welte <laforge@openmoko.org> |
| |
| commit f540c42d9564854b19ce9bbb70affe172529fe70 |
| Author: Harald Welte <laforge@openmoko.org> |
| Date: Wed Dec 19 14:09:58 2007 +0100 |
| |
| Fix building with CRAMFS but not JFFS2 support |
| |
| Signed-off-by: Harald Welte <laforge@openmoko.org> |
| |
| commit 23d0baf967fecdaf1804f045f6339337c5607eec |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Dec 22 15:52:58 2007 +0100 |
| |
| Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 23776ff292966a85d811126933830bed48211826 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Dec 11 10:53:12 2007 +0100 |
| |
| ARM: support board-specific ethernet PHY init |
| |
| Add until the new phylib will be arrived |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 7b74ebe723e576baedf5a8b6240589b19b845a1b |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Dec 8 16:34:08 2007 +0100 |
| |
| IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit a2df4da31b1a1e41e3e9e1358cfc52b806046ce1 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Dec 9 11:01:10 2007 +0100 |
| |
| Add missing file in gitignore and comments |
| |
| based on Linux source tree's .gitignore files |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 435dc8fcdb3bc61d3d490773a8f369f98a20c868 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 9 11:36:21 2008 +0100 |
| |
| Coding Style cleanup, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit b2e2142c500c48a57f18f9dd30e66c13caea0971 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 9 10:38:58 2008 +0100 |
| |
| POST: Execute SPR test after relocation |
| |
| On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses |
| self modifying code and this doesn't work with stack in d-cache, since |
| I can't move the code from d-cache to i-cache. We move the SPR test to |
| be executed a little later, after relocation. Then stack is located in |
| SDRAM and this self-modifying code is no problem anymore. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 9 10:28:20 2008 +0100 |
| |
| ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore |
| |
| This patch configures the LWMON5 port to use d-cache as init-ram and |
| the unused GPT0_COMP6 as POST WORD storage. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1754f50b710194f886b6f2831803d8960171a14d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 9 10:25:46 2008 +0100 |
| |
| ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage |
| |
| The privious 4xx POST implementation only supported storing the POST |
| WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer |
| we need to store the POST WORD in some other non volatile location. |
| This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such |
| a location. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 9 10:23:16 2008 +0100 |
| |
| ppc4xx: Add 44x cache locking to better support init-ram in d-cache |
| |
| This patch adds support for locking the init-ram/stack in d-cache, |
| so that other regions may use d-cache as well |
| |
| Note, that this current implementation locks exactly 4k of d-cache, |
| so please make sure that you don't define a bigger init-ram area. Take |
| a look at the lwmon5 440EPx implementation as a reference. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0ddb89601a8d29e808db450366752ffdc6267c53 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 9 10:16:33 2008 +0100 |
| |
| Fix memset bug in ext2fs_read_file() |
| |
| ext2fs_read_file() had the function arguments swapped. |
| |
| Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 32d6f1bc09175f3b77469771e839bc7255a9f22e |
| Author: Markus Klotzbücher <mk@denx.de> |
| Date: Tue Jan 5 08:17:15 1988 +0100 |
| |
| Fix problems with usb storage devices on MPC5200 /TQM5200 |
| |
| The MPC5200 OHCI controller operates in big endian, so |
| CFG_OHCI_BE_CONTROLLER must be defined for it to work properly. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Jan 8 22:58:27 2008 +0100 |
| |
| Fix compile problem with new env code. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 64b3727b9779d86127cd576e392a987de5ebb9fd |
| Author: Markus Klotzbücher <mk@denx.de> |
| Date: Tue Nov 27 10:23:20 2007 +0100 |
| |
| tools: fix fw_printenv tool to compile again |
| |
| This patch updates the fw_printenv/fw_setenv userspace tool to include |
| the correct MTD header in order to compile against current kernel |
| headers. Backward compatibility is preserved by introducing an option |
| MTD_VERSION which can be set to "old" for compilation using the old MTD |
| headers. Along with this a number of warnings are fixed. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Jan 8 15:40:09 2008 +0100 |
| |
| ppc4xx: assign PCI interrupts on seuqoia boards |
| |
| Some operating systems rely on assigned PCI interrupts. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 6e9233d30afe57cb6e148fbfa4895e7810196fac |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Jan 8 15:50:49 2008 +0100 |
| |
| ppc4xx: Move cpu/ppc4xx/vecnum.h into include path |
| |
| This patch allows the use of 4xx interrupt vector number defines |
| in board specific code outside cpu/ppc4xx. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 580d1d3186a2bc6dbdb626941b716dae1788e51e |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Jan 8 15:39:01 2008 +0100 |
| |
| ppc4xx: Fix UIC2 vector number base |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Jan 8 12:49:58 2008 +0100 |
| |
| ppc4xx: Update PLB/PCI divider for PMC440 board |
| |
| This patch updates the PLB/PCI divider when running at |
| 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Jan 8 11:13:09 2008 +0100 |
| |
| ppc4xx: Disable error message when no NAND chip is installed on PMC440 |
| |
| Add CFG_NAND_QUIET_TEST option to disable error message when |
| no NAND chip is installed on PMC440 boards. |
| |
| Disable a couple of config defines that are only used for NAND_U_BOOT. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit c83d7ca4dadd44ae430235077f63b64a11f36f6e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Jan 8 22:58:27 2008 +0100 |
| |
| Fix compile problem with new env code. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 6de66b35426312a21174a9bf0576a094e2904bea |
| Author: Markus Klotzbücher <mk@denx.de> |
| Date: Tue Nov 27 10:23:20 2007 +0100 |
| |
| tools: fix fw_printenv tool to compile again |
| |
| This patch updates the fw_printenv/fw_setenv userspace tool to include |
| the correct MTD header in order to compile against current kernel |
| headers. Backward compatibility is preserved by introducing an option |
| MTD_VERSION which can be set to "old" for compilation using the old MTD |
| headers. Along with this a number of warnings are fixed. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit ad3006fe7e84667021753b74247b0bafd97ba35f |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Mon Jan 7 23:47:32 2008 -0500 |
| |
| LIBFDT: use memmove() instead of memcpy() |
| |
| This is partial patch from the DTC/libfdt |
| commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647 |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Wed Nov 21 11:56:14 2007 +1100 |
| |
| The patch also fixes one genuine bug caught by valgrind - |
| _packblocks() in fdt_rw.c was using memcpy() where it should have been |
| using memmove(). |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit aec7135bc300e3340d18f203347ee00c5b5f68c0 |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Mon Dec 17 14:42:07 2007 +1100 |
| |
| libfdt: Add more documentation (patch the seventh) |
| |
| This patch adds more documenting comments to libfdt.h. Specifically, |
| these document the read/write functions (not including fdt_open_into() |
| and fdt_pack(), for now). |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e |
| Author: David Gibson <david@gibson.dropbear.id.au> |
| Date: Mon Dec 17 14:41:52 2007 +1100 |
| |
| libfdt: Add more documentation (patch the sixth) |
| |
| This patch adds some more documenting comments to libfdt.h. |
| Specifically this documents all the write-in-place functions. |
| |
| Signed-off-by: David Gibson <david@gibson.dropbear.id.au> |
| |
| commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Dec 29 22:45:27 2007 -0500 |
| |
| Fine grained per property /chosen updating. |
| |
| Implement a suggestion by Scott Wood to make the /chosen handling fine |
| grained. Don't overwrite pre-existing properties on a per-property basis, |
| so if /chosen exists but a necessary /chosen/property doesn't, it gets |
| created. If a /chosen property exists, it is NOT overwritten unless the |
| "force" flag is true. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 238cb7a423c6eaa36496efb788cfb9798cea7f95 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Jan 5 15:33:29 2008 -0500 |
| |
| Improve the FDT help message. |
| |
| Add a note that "fdt copy" makes the new address active. |
| Remove most of the extra hints at the end of the fdt help. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Jan 5 14:52:04 2008 -0500 |
| |
| Support setting FDT properties with optional values. |
| |
| Fix a bug found and documented by Bartlomiej Sieka where the optional |
| value on "fdt set <path> <prop> [<val>]" wasn't optional. |
| |
| => fdt mknode / testnode |
| => fdt print /testnode |
| testnode { |
| }; |
| => fdt set /testnode testprop |
| => fdt print /testnode |
| testnode { |
| testprop; |
| }; |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 22fb2246df91bfc840d87f0c5910818bad55577a |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 28 11:56:30 2007 +0100 |
| |
| Add fdt_find_and_setprop() to fdt_support.h |
| |
| fdt_find_and_setprop() is used by several 4xx boards and it's |
| missing in the appropriate header. This patch eliminates a |
| warning when building U-Boot for such boards. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 802b769bac17b0560d3535a42c502469ee190cd1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jan 8 18:39:30 2008 +0100 |
| |
| ppc4xx: Return 0 on success in 4xx ethernet driver |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6775c68683a53c7abc778774641aac6f833a2cbf |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jan 8 09:59:49 2008 -0600 |
| |
| mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Dec 20 16:28:34 2007 -0600 |
| |
| mpc83xx: rm remaining FLAT_TREE code |
| |
| ..in board pci.c files |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit b3458d2cd55d01732e30a76d898afd99e871cd67 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Dec 20 15:57:28 2007 -0600 |
| |
| mpc83xx: remove FLAT_TREE code |
| |
| need to rm it from pci code, too! |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 5b8bc606c61456566af6912f818a153b6b06f242 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Dec 20 14:09:22 2007 -0600 |
| |
| mpc83xx: convert to using do_fixup_*() |
| |
| convert to using simpler mpc85xx style fdt update code; streamline by |
| eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm |
| the old school FLAT_TREE code from 83xx (since the sbc8349 was just |
| converted over to using libfdt). |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab |
| Author: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Date: Thu Dec 20 12:58:51 2007 -0500 |
| |
| sbc8349: enable libfdt by default on WRS SBC8349 board. |
| |
| Make libfdt the default for the WRS SBC8349 board. |
| Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef |
| done for the other 83xx based boards. Also fix a typo in CONFIG_PCI. |
| |
| Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> |
| |
| commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40 |
| Author: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Date: Thu Dec 20 12:58:16 2007 -0500 |
| |
| sbc8349: migrate board to libfdt |
| |
| This adds libfdt support code for the Wind River sbc8349 board. |
| |
| Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for |
| the other Freescale 83xx boards. |
| |
| Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> |
| |
| commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d |
| Author: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Date: Thu Dec 20 12:56:19 2007 -0500 |
| |
| sbc8349: Remove board specific ECC code |
| |
| ECC code is now shared for all 83xx boards, so remove board specific one. |
| See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference. |
| |
| Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> |
| |
| commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Dec 20 01:30:48 2007 -0600 |
| |
| mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x) |
| |
| continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit ccf21c311e68d48399eff1e72936052885f6e3f7 |
| Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| Date: Thu Dec 6 16:43:40 2007 +0100 |
| |
| Add support CONFIG_UEC_ETH3 in MPC83xx |
| |
| Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| |
| commit e6af9932d31171e35db880e7b2f29f903b1b7660 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Nov 26 11:00:54 2007 -0600 |
| |
| Remove CONFIG options related to OF that we dont use |
| |
| The MPC8360E MDS config defined: |
| CONFIG_OF_HAS_BD_T |
| CONFIG_OF_HAS_UBOOT_ENV |
| |
| Which we don't use or ever needed. This seems like copy-paste feature creep. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f602082b4b7ed4ee16432067cc67a0a24fedc715 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Mon Dec 10 14:16:22 2007 -0600 |
| |
| mpc83xx: supress compiler warning |
| |
| mpc8360emds.c: In function ‘ft_board_setup’: |
| mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type |
| mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit c16e44fa835fb9eec982d919863a04e2f78e5ce7 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Nov 27 14:17:29 2007 -0600 |
| |
| mpc83xx: fix remaining fdt_find_node_by_path references |
| |
| rename to fdt_path_offset |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 921d4b19ad1be704df58725485d9292dc0414adf |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Mon Nov 19 12:30:09 2007 -0600 |
| |
| mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x |
| |
| Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x. |
| This change guarantees that the environment will be located on the |
| first flash sector after the U-Boot image. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 24f868433b50ecbaa88e118aadc7bd254013c6ae |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Nov 9 14:28:08 2007 -0600 |
| |
| mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid |
| |
| u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type |
| properties in the device tree so the PHY gets configured for internal delay on |
| RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Sep 18 12:41:15 2007 +0800 |
| |
| mpc83xx: update the CREDITS and MAINTAINERS |
| |
| update the CREDITS and MAINTAINERS. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit b21add4b42af7b767448251b599b91066a160e0d |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Sep 18 12:40:21 2007 +0800 |
| |
| mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds |
| |
| Add the MAINTAINER and MAKEALL entries for mpc837xemds |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit f8900ce9094c462355eb792eea264ff16ac8fd16 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Sep 18 12:38:53 2007 +0800 |
| |
| mpc83xx: Add the MPC837xEMDS board readme |
| |
| Add the README.mpc837xemds to /doc |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 19580e660cc8da49f16536a8bd78c047c7bc12e5 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Sep 18 12:37:57 2007 +0800 |
| |
| mpc83xx: Add the support of MPC837xEMDS board |
| |
| The MPC837xEMDS board support: |
| * DDR2 400MHz hardcoded and SPD init |
| * Local bus NOR Flash |
| * I2C, UART, MII and RTC |
| * eTSEC RGMII |
| * PCI host |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 555da61702771fe0f76f3de23b4e7590f3704161 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Sep 18 12:36:58 2007 +0800 |
| |
| mpc83xx: Add the support of MPC8315E SoC |
| |
| The MPC8315E SoC including e300c3 core and new IP blocks, |
| such as TDM, PCI Express and SATA controller. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 03051c3d35c9981ceaa059005660e699f3eacf1c |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Tue Sep 18 12:36:11 2007 +0800 |
| |
| mpc83xx: Add the support of MPC837x SoC |
| |
| The MPC837x SoC including e300c4 core and new IP blocks, |
| such as SDHC, PCI Express and SATA controller. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 651d96f7e4c84adcdb98ef07ec878c20326e3359 |
| Author: Anton Vorontsov <avorontsov@ru.mvista.com> |
| Date: Wed Nov 14 18:54:53 2007 +0300 |
| |
| MPC8360E-MDS: configure and enable second UART |
| |
| Despite user manual, BCSR9.7 is negated (high) on HRST, so |
| UART2 is disabled. Fix that and configure QE pins properly. |
| |
| Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> |
| |
| commit b2893e1fcb28fad8c8b317104df8cee0142c7631 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Mon Nov 5 09:34:06 2007 -0600 |
| |
| 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions |
| |
| Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the |
| currently-defined 83xx boards. This change guarantees that the environment |
| will be located on the first flash sector after the U-Boot image. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit e05329516a13616b53240cd85b739217c2bf87f1 |
| Author: Larry Johnson <lrj@acm.org> |
| Date: Fri Jan 4 13:27:02 2008 -0500 |
| |
| ppc4xx: Remove weak binding from common Denali data-eye search code |
| |
| Now that there are no board-specific versions of |
| "denali_core_search_data_eye()", the weak binding on the common version |
| can be removed. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 5ba576c01602fd328800a427964c36a0a05c5dce |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 5 09:13:46 2008 +0100 |
| |
| ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 5 09:12:41 2008 +0100 |
| |
| ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup |
| |
| On Katmai the complete auto-calibration somehow doesn't seem to |
| produce the best results, meaning optimal values for RQFD/RFFD. |
| This was discovered by GDA using a high bandwidth scope, |
| analyzing the DDR2 signals. GDA provided a fixed value for RQFD, |
| so now on Katmai "only" RFFD is auto-calibrated. |
| |
| This patch also adds RDCC calibration as mentioned on page 7 of |
| the AMCC PowerPC440SP/SPe DDR2 application note: |
| "DDR1/DDR2 Initialization Sequence and Dynamic Tuning" |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 49db47b8ae6afff2b898be312948ff501357dc80 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Wed Jan 2 16:48:42 2008 +0100 |
| |
| ppc4xx: Remove sdram.h from PMC440 board |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Wed Jan 2 16:48:34 2008 +0100 |
| |
| ppc4xx: use common denali core defines and data eye search code for PMC440 |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Wed Jan 2 12:05:14 2008 +0100 |
| |
| ppc4xx: More cleanup for esd's LCD code |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jan 4 12:00:01 2008 +0100 |
| |
| ppc4xx: Fix Sequoia NAND booting target |
| |
| The Sequoia NAND booting target now uses the recently extracted |
| cpu/ppc4xx/denali_data_eye.c file too. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0ddd969aec532bd7eae30fc09590488a3aaa629a |
| Author: Lawrence R. Johnson <lrj@acm.org> |
| Date: Thu Jan 3 15:02:02 2008 -0500 |
| |
| ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit b05e8bf58be9d8956fdfde3d8c8e87c140414663 |
| Author: Lawrence R. Johnson <lrj@acm.org> |
| Date: Fri Jan 4 02:11:56 2008 -0500 |
| |
| ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board |
| |
| Note: this patch changes the configuration of some GPIO registers: |
| |
| Register Old Value New Value |
| --------------- ---------- ---------- |
| DCR GPIO0_TCR 0x0000000F 0x0000F0CF |
| DCR GPIO0_TSRH 0x55005000 0x00000000 |
| DCR GPIO1_TCR 0xC2000000 0xE2000000 |
| DCR GPIO1_TSRL 0x0C000000 0x00200000 |
| DCR GPIO1_ISR2L 0x00050000 0x00110000 |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 5ab884b254ca2e707ab50545cd705f30108cf491 |
| Author: Lawrence R. Johnson <lrj@acm.org> |
| Date: Thu Jan 3 18:54:00 2008 -0500 |
| |
| ppc4xx: Add functionality to GPIO support |
| |
| This patch makes two additions to GPIO support: |
| |
| First, it adds function gpio_read_in_bit() to read the a bit from the |
| GPIO Input Register (GPIOx_IR) in the same way that function |
| gpio_read_out_bit() reads a bit from the GPIO Output Register |
| (GPIOx_OR). |
| |
| Second, it modifies function gpio_set_chip_configuration() to provide |
| an additional option for configuring the GPIO from the |
| "CFG_4xx_GPIO_TABLE". |
| |
| According to the 440EPx User's Manual, when an alternate output is used, |
| the three-state control is configured in one of two ways, depending on |
| the particular output. The first option is to select the corresponding |
| alternate three-state control in the GPIOx_TRSH/L registers. The second |
| option is to select the GPIO Three-State Control Register (GPIOx_TCR) in |
| the GPIOx_TRSH/L registers, and set the corresponding bit in the |
| GPIOx_TCR register to enable the output. For example, the Manual |
| specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use |
| the alternate three-state control (first option), and specifies |
| configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output |
| enabled in the GPIOx_TCR register (second option). |
| |
| Currently, gpio_set_chip_configuration() configures all alternate signal |
| outputs to use the first option. This patch allow the second option to |
| be selected by setting the "out_val" element in the table entry to |
| "GPIO_OUT_1". The first option is used when the "out_val" element is |
| set to "GPIO_OUT_0". Because "out_val" is not currently used when an |
| alternate signal is selected, and because all current GPIO tables set |
| "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should |
| not change any existing configurations. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 196404cdc1de495d6182e84731c200fc5748df15 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sun Dec 30 01:01:54 2007 -0500 |
| |
| PPC4xx: Remove sdram.h from board/lwmon5 |
| |
| These definitions are now in "include/ppc440.h". |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sun Dec 30 01:01:32 2007 -0500 |
| |
| PPC4xx: Use common code for LWMON5 board SDRAM support |
| |
| This patch also modifies the functionality of the code so that the data-eye |
| search is now done with with the cache disabled. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 62cc3951ab72135d9c101f1845b794e63a0fa189 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sun Dec 30 01:01:14 2007 -0500 |
| |
| PPC4xx: Remove sdram.h from board/amcc/sequoia |
| |
| These definitions are now in "include/ppc440.h". |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sun Dec 30 01:00:50 2007 -0500 |
| |
| PPC4xx: Use common code for Sequoia board SDRAM support |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 8b0c5c127690335758100c25eaec2b84db97c101 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 16:58:41 2007 +0100 |
| |
| net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option |
| |
| When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's |
| networking stack does not automatically switch to |
| another interface. This patch does not touch the default |
| behavior. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32 |
| Author: Upakul Barkakaty <upakul@gmail.com> |
| Date: Thu Nov 29 12:16:13 2007 +0530 |
| |
| NET: Proper return code handling in eth_init() function in file eth.c |
| |
| This patch modifies the return code handling in the eth_init() |
| function, to be compatible with the handling of the return codes in |
| the other network stack files. It now returns a 0 on Success and -1 on |
| error. |
| |
| Signed-off-by: Upakul Barkakaty <upakul.barkakaty@conexant.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 5ca2d0953e4579a80810966cca2077e20d912c97 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Mon Nov 19 20:27:04 2007 +0900 |
| |
| net/eth.c: Fix env_enetaddr signed overflow |
| |
| Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are |
| warned as below: |
| |
| U-Boot 1.2.0 (Aug 30 2007 - 08:27:37) |
| |
| DRAM: 256 MB |
| Flash: 32 MB |
| In: serial |
| Out: serial |
| Err: serial |
| Net: NEC-Candy |
| Warning: NEC-Candy MAC addresses don't match: |
| Address in SROM is 00:00:4C:80:92:A2 |
| Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21 |
| |
| This patch changes env_enetaddr type from `char' to `unsigned char'. |
| |
| Cc: Masaki Ishikawa <ishikawa-masaki@cnt.mxe.nes.nec.co.jp> |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit f85b60710571b37293d2233933b76e2aa3db5635 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Thu Dec 27 18:19:02 2007 +0100 |
| |
| Introduce new eth_receive routine |
| |
| The purpose of this routine is receiving a single network frame, outside of |
| U-Boot's NetLoop(). Exporting it to standalone programs that run on top of |
| U-Boot will let them utilise networking facilities. For sending a raw frame |
| the already existing eth_send() can be used. |
| |
| The direct consumer of this routine is the newly introduced API layer for |
| external applications (enabled with CONFIG_API). |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| Signed-off-by: Ben Warren <biggerbadderben@gmail.com> |
| |
| commit 5c740711f0ea5b51414b341b71597c4a0751be74 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Jan 3 10:41:04 2008 -0600 |
| |
| 8610: Move include of config.h earlier. |
| |
| Include config.h earlier in the set of #includes |
| so as to avoid a incidental and duplicate definition |
| of CFG_CACHELINE_SIZE. |
| |
| Signed-off-by: Jon Loeliger |
| |
| commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Dec 4 10:53:34 2007 -0600 |
| |
| Don't slam #undef DEBUG in the 8641HPCN config file. |
| |
| Doing so prevents it from being individually set |
| and useful in other files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Nov 28 14:47:18 2007 -0600 |
| |
| Convert MPC8641HPCN to use libfdt. |
| |
| Assumes the presence of the aliases node in the DTS to |
| locate the ethernet, pci and serial nodes for fixups. |
| |
| Use consistent fdtaddr and fdtfile in environment variables. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ce37422d0002e10490e268392e0c4e3028e52cec |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 2 14:06:26 2008 +0100 |
| |
| cfi_flash: Fix bug in flash_isset() to use correct 32bit function |
| |
| This bug was detected on the LWMON5 target which has 2 Intel 16bit wide |
| flash chips connected to a 32bit wide port. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1182e9f8e3b92fc372d64943293de53daa2e26cf |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 2 15:58:44 2008 +0100 |
| |
| Fix compile problem introduced by "cleanup" commit 3dfd708c |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 2 15:54:45 2008 +0100 |
| |
| Make scripts and Makefiles POSIX compliant |
| |
| The bash builtin versions of the "test" (resp. "[") command allow |
| using "==" for string comparisons, but POSIX compatible implemen- |
| tations (like /usr/bin/test) insist on using "=" only. On such systems |
| you will see: |
| |
| $ /usr/bin/test a == a && echo OK |
| /usr/bin/test: ==: binary operator expected |
| |
| This patch fixes Makefiles and scripts to use POSIX style. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 47cc23cbe9a669c510183f4f049bf703ef445f3b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 2 14:05:37 2008 +0100 |
| |
| cfi_flash: Fix bug in flash_isset() to use correct 32bit function |
| |
| This bug was detected on the LWMON5 target which has 2 Intel 16bit wide |
| flash chips connected to a 32bit wide port. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jan 2 12:38:43 2008 +0100 |
| |
| Minor coding style cleanup. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e174ac34adf5d5653df12bc3cf19c52063a71269 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Dec 28 17:29:56 2007 +0100 |
| |
| ppc4xx: Coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 28 17:07:24 2007 +0100 |
| |
| ppc4xx: Complete PMC440 board support |
| |
| This patch brings the PMC440 board configuration file. |
| Finally it enables the PMC440 board support. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 407843a582560fc5231299561ab3c2b6b6cd3397 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 28 17:07:18 2007 +0100 |
| |
| ppc4xx: Add FPGA support and BSP commands for PMC440 boards |
| |
| This patch adds some BSP commands and FPGA booting support |
| for esd's PMC440 boards. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 72c5d52aedcce35e4b4fa5895605554825b6a76f |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 28 17:07:14 2007 +0100 |
| |
| ppc4xx: Add initial esd PMC440 board files |
| |
| This patch adds the first files for the new esd PMC440 boards. |
| The next two patches will complete the PMC440 board support. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 28 17:10:36 2007 +0100 |
| |
| ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates |
| |
| - add EEPROM write protection for esd PLU405 boards. |
| - initialize NAND GPIOs |
| - use correct io accessors |
| - cleanup |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 77660c4b59055d621d2a8595bd4c18bb277268fc |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 28 17:10:44 2007 +0100 |
| |
| ppc4xx: use correct io accessors for esd's LCD code |
| |
| This patch fixes esd's LCD dectection code to work correctly with |
| newer gcc versions. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 28 17:10:42 2007 +0100 |
| |
| ppc4xx: Maintenance patch for VOH405 boards |
| |
| - add EEPROM write protection |
| - initialize NAND GPIOs |
| - use correct io accessors |
| - slow down I2C clock to 100kHz |
| - enable ext. I2C bus |
| - cleanup |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit c05569066dbcba3fdf36d4d1943df265dc316a86 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Dec 28 16:08:08 2007 +0100 |
| |
| ppc4xx: Enable 405EP PCI arbiter per default on all boards |
| |
| In an attmemt to clean up the 4xx start.S file, I removed the enabling |
| of the internal 405EP PCI arbiter. This is needed for multiple other |
| 405EP platforms, like most of the esd 405EP. Now the internal PCI |
| arbiter is enabled again per default as it has been before. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Dec 28 15:53:46 2007 +0100 |
| |
| ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Dec 28 06:06:04 2007 +0100 |
| |
| ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target |
| |
| Use correct link to nand_ecc now located in drivers/mtd/nand/ for the |
| platforms mentioned above. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit b568fd25574181a3b12ae3d66b2913903442cb83 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Dec 27 17:03:46 2007 +0100 |
| |
| Remove CPCI440 board |
| |
| This board never left prototyping state and it |
| became a millstone round my neck. So remove it. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit c591dffe0cbacd896ccbad06011fe6d6afa080da |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Thu Dec 27 11:28:51 2007 -0500 |
| |
| Add support for Korat PPC440EPx board |
| |
| These patches add support for the PPC440EPx-based "Korat" board to |
| U-Boot. They are based primarily on support for the Sequoia board. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 87dc096829e6a6363f4fdd73653b0093a85adbe0 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Dec 22 15:16:25 2007 -0500 |
| |
| Add configuration file for Korat board |
| |
| This patch supplies the configuration file for the Korat PPC440EPx- |
| processor board. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Dec 22 15:16:11 2007 -0500 |
| |
| Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit aba19604d848b2838cfb9ebe818909e6a216058e |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Thu Dec 27 10:54:48 2007 -0500 |
| |
| Add 440EPx DDR2 SPD DIMM support |
| |
| This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM |
| controller. It should also work on the 440GRx. It is based on the DDR2 |
| SPD code for the 440EP/440EPx, but makes no provision for DDR1 support. |
| |
| This code has been tested on prototype Korat boards with three Kingston |
| DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC |
| (two ranks). The Korat board has a single DIMM socket, but support has |
| been provided (though not tested) for boards with two DIMM sockets. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Dec 22 15:15:30 2007 -0500 |
| |
| Copy 440EPx/GRx SDRAM data-eye search to common directory |
| |
| This patch creates a non-board-specific file for performing the SDRAM |
| data-eye search. It also adds ECC error checking to the test of valid |
| data on readback when ECC is enabled. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit c46f53333b22b1f9098676bea8884fc7db820cf3 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Dec 22 15:15:13 2007 -0500 |
| |
| Add definitions for 440EPx/GRx SDRAM controller to ppc440.h |
| |
| This patch adds the Denali SDRAM controller definitions to "ppc440.h". |
| It also fixes two typos in the definitions, so the board-specific |
| "sdram.h" files containing these definitions are also fixed to avoid |
| compiler warnings. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit c348578bf612d0c56d8d376d23cae16defbd86af |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Thu Dec 27 10:50:55 2007 -0500 |
| |
| Add Ethernet 1000BASE-X support for PPC4xx |
| |
| This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol |
| is defined, the PHY will advertise it's capabilities for autonegotiation |
| based on the capabilities shown in the PHY's status registers, including |
| 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will |
| advertise hard-coded capabilities, as before. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Thu Dec 27 09:52:17 2007 -0500 |
| |
| Add driver for National Semiconductor LM73 temperature sensor |
| |
| This driver is based on the driver for the LM75. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 12618278688ea9b3d76536960a5ad2e3790fac40 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Dec 22 15:14:00 2007 -0500 |
| |
| Add driver for STMicroelectronics M41T60 RTC |
| |
| This driver is based on the driver for the M41T11. In the intended |
| application, the RTC will be powered by a large capacitor, rather than a |
| battery. The driver therefore checks to see whether the RTC has lost |
| power. The chip's OUT bit is normally reset from its power-up state. If |
| the OUT bit is read as set, or if the date and time are not valid, then the |
| RTC is assumed to have lost power, and its date and time are reset to |
| 1900-01-01 00:00:00. |
| |
| Support for adjusting the speed of the clock to improve accuracy is |
| provided through an environment variable. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit d3471173e14b7544bb60339eda8d3d3906694b0a |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Dec 22 15:34:39 2007 -0500 |
| |
| Use out_be32() and friends to access memory-mapped registers in sequoia.c |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit c68f59fe3ec16769f82b5fca7421983c336d3aac |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Dec 22 15:34:20 2007 -0500 |
| |
| Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Dec 22 15:23:50 2007 -0500 |
| |
| Cosmetic changes to ECC POST for AMCC Denali core |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 2e583d6c81034f80a267b89fa55498ae063ccef1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Dec 26 20:20:19 2007 +0100 |
| |
| ppc4xx: Fix compilation problem in 405 cache POST test |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Dec 22 12:20:09 2007 +0100 |
| |
| ppc4xx: Move virtual address of POST cache test to bigger address |
| |
| On Sequoia & LWMON5 the virtual address of the POST cache test is now |
| moved to a bigger address. This enables usage of more memory on those |
| boards. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d91722102cf63f77a0148ed3f3d54a26d87575e9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Dec 22 12:18:26 2007 +0100 |
| |
| ppc4xx: Fix problem in 44x cache POST routine |
| |
| As repoted by Larry Johnson, running "diag run cache" caused a crash |
| in U-Boot. This problem was introduced by a patch that removed the |
| TLB entry for the cache test after the test has completed. Since this |
| TLB was only setup once, a 2nd attempt to run this cache test |
| failed with a crash. Now this TLB entry is created every time the |
| routine is called. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit b0265b576bb8fa9465f99e99c323768b562fadc2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Dec 21 07:51:29 2007 +0100 |
| |
| ppc4xx: Update Makalu fdt support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Dec 19 09:05:40 2007 +0100 |
| |
| ppc4xx: Add fdt support to AMCC Katmai eval board |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 328a340392a5df9aaf00792be989df73e750859e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Dec 18 08:44:51 2007 +0100 |
| |
| ppc4xx: fdt: Cleanup setup of cpu node setup |
| |
| Now the cpu node setup ("timebase-frequency" and "clock-frequency") is |
| without using the absolute path to the cpu node. This makes it possible |
| to use this U-Boot version with both versions of cpu-node naming |
| "cpu@0" and the former "PowerPC,440EPx@0". |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Dec 17 17:26:21 2007 +0100 |
| |
| ppc4xx: Fix lwmon5 compilation problem |
| |
| Now that the 440EPx ECC test is not board specific anymore |
| remove this Makefile. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62 |
| Author: Anatolij Gustschin <agustschin@t-online.de> |
| Date: Wed Dec 5 17:43:20 2007 +0100 |
| |
| Fix ppc4xx clear_bss() code |
| |
| ppc4xx clear_bss() fails if BSS segment size is not |
| divisible by 4 without remainder. This patch provides |
| fix for this problem. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| |
| commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Nov 30 18:35:11 2007 +0100 |
| |
| PPC4xx: Minimal changes to add vxWorks support |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 052440b022ca8981d39b6f8c10d1aa6326f47480 |
| Author: Markus Klotzbücher <mk@denx.de> |
| Date: Fri Nov 23 13:09:18 2007 +0100 |
| |
| ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config |
| |
| When using dhcp/bootp the "netmask" environment variable is not |
| set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is |
| desireable, so the following patch adds this this option to the board |
| config. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Oct 27 12:48:15 2007 -0400 |
| |
| Fix/enhance ECC POST for 440EPx/GRx |
| |
| This patch allows the ECC POST to be used for different boards with the |
| PPC440 Denali SDRAM controller. Modifications include skipping the test |
| if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization |
| to prevent timing errors. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4 |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Sat Oct 27 12:48:05 2007 -0400 |
| |
| PPC4xx: Move/rename ECC POST for 440EPx/GRx |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| |
| commit c29d2d3680046d430022c55e50fcb27f5866517e |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 14 11:20:33 2007 +0100 |
| |
| ppc4xx: use correct io accessors for 4xx ethernet POST |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit ba79fde58a48c0a6ff8e2a96caba951594142203 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Dec 14 11:19:56 2007 +0100 |
| |
| ppc4xx: fix flush + invalidate_dcache_range arguments |
| |
| flush + invalidate_dcache_range() expect the start and stop+1 address. |
| So the stop address is the first address behind (!) the range. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Dec 14 08:41:29 2007 +0100 |
| |
| ppc4xx: fdt: use fdt_fixup_ethernet() |
| |
| By using aliases in the dts file, the ethernet node fixup is |
| much easier with the recently added functions. |
| |
| Please note that the dts file needs the aliases for this to work. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 136288847e3b04f2ff357a067ad45e10afa0a24c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Dec 13 14:52:53 2007 +0100 |
| |
| ppc4xx: Bring 4xx fdt support up-to-date |
| |
| This patch update the 4xx fdt support. It enabled fdt booting |
| on the AMCC Kilauea and Sequoia for now. More can follow later |
| quite easily. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Dec 27 07:50:54 2007 +0100 |
| |
| cfi_flash: Add missing check for erased dest to flash_write_cfibuffer() |
| |
| The check for an sufficiently erased destination was missing in the |
| buffered write function of the cfi flash driver (when |
| CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that |
| writing to such a region will fail with the currect error message. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Mon Nov 12 10:56:17 2007 +0100 |
| |
| Some configuration updates for the TQM5200 based TB5200 board: |
| |
| - enable command line history |
| - increase malloc space (because of bigger flash sectors) |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit e318d9e9021a0af7508171f84ed09d0e79f0284e |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Thu Sep 27 11:10:08 2007 +0200 |
| |
| TQM8xx: use the CFI flash driver on all TQM8xx boards |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 11d9eec479b470eab9242ab937fca70a876d9376 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Wed Sep 26 17:55:56 2007 +0200 |
| |
| TQM885D: adjust for doubled flash sector size + some minor fixes |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83 |
| Author: Jens Gehrlein <jens.gehrlein@tqs.de> |
| Date: Wed Sep 26 17:55:54 2007 +0200 |
| |
| TQM885D: Exchanged SDRAM timing by a more relaxed timing. |
| |
| CAS-Latency=2, Write Recovery Time tWR=2 |
| The max. supported bus frequency is 66 MHz. Therefore, changed |
| threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit b988b8cd443989be65161888eea0127ad03f846f |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Wed Sep 26 17:55:56 2007 +0200 |
| |
| TQM885D: use calculated cpuclk instead of measuring it |
| |
| On the TQM885D the measurement of cpuclk with the PIT reference |
| timer ist not necessary. Since all module variants use the same |
| external 10 MHz oscillator, the cpuclk only depends on the PLL |
| configuration - which is readable by software. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 492c7049869348d31168de8dad89651315e468e0 |
| Author: Jens Gehrlein <jens.gehrlein@tqs.de> |
| Date: Thu Sep 27 14:54:46 2007 +0200 |
| |
| TQM885D: fix SDRAM refresh |
| |
| At 133 MHz the current SDRAM refresh rate is too fast |
| (measured 4 * 1.17 us). |
| CFG_MAMR_PTA changes from 39 to 128. This result |
| in a refresh rate of 4 * 7.8 us at the default clock |
| 66 MHz. At 133 MHz the value will be then 4 * 3.8 us. |
| This is a compromise until a new method is found to |
| adjust the refresh rate. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit dabad4b9bc46908e301f73ce76b38b23626a96e9 |
| Author: Jens Gehrlein <jens.gehrlein@tqs.de> |
| Date: Thu Sep 27 14:54:46 2007 +0200 |
| |
| TQM860M: Support for 10col SDRAMs, max. 128 MiB |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 61fb15c516fef5631e305f1976d7b3a679725856 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Dec 27 01:52:50 2007 +0100 |
| |
| Fix coding style issues; update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 467bcee11fe26ad422f2de971aa70866079870f2 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri Dec 14 15:36:18 2007 +0100 |
| |
| cfi_flash: Add manufacturer-specific fixups |
| |
| Run fixups based on the JEDEC manufacturer ID independent of the |
| command set ID. |
| |
| This changes current behaviour: Previously, geometry reversal for AMD |
| chips were done based on the command set ID, while they are now done |
| based on the JEDEC manufacturer and device ID. |
| |
| Also add fixup for top-boot Atmel chips. A fixup is needed for |
| AT49BV6416(T) too, but since u-boot currently only reads the low byte |
| of the device ID, there's no way to tell it apart from AT49BV642D, |
| which should not have this fixup. Since AT49BV642D support is |
| necessary to get ATNGW100 board support into mainline, I've commented |
| out the fixup for now. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri Dec 14 15:36:17 2007 +0100 |
| |
| cfi_flash: Add cmdset-specific init functions |
| |
| Move things like reading JEDEC IDs and fixing up geometry reversal |
| into separate functions. The geometry reversal fixup is now performed |
| by altering the qry structure directly, which makes the sector init |
| code slightly cleaner. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit e23741f4a6d8047520ef0d4971762749b3587d32 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri Dec 14 15:36:16 2007 +0100 |
| |
| cfi_flash: Read whole QRY structure in one go |
| |
| Read out the whole CFI Standard Query structure after successful cfi |
| identification. This allows subsequent code to access this information |
| directly without having to go through flash_read_uchar() and friends. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Mon Dec 17 11:02:44 2007 +0100 |
| |
| AVR32: Fix logic inversion in disable_interrupts() |
| |
| disable_interrupts() should return nonzero if interrupts were |
| _enabled_ before, not disabled. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit acac475212cbedb17b321a363a1c878e2b47b37f |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri Dec 14 16:51:22 2007 +0100 |
| |
| AVR32: Enable interrupts at bootup |
| |
| The timer code depends on the timer interrupt to keep track of the |
| upper 32 bits of the cycle counter. This obviously doesn't work when |
| interrupts are disabled the whole time. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 9570bcd87f4db255514f43b6701746c412f8fef0 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Nov 15 10:03:45 2007 +0100 |
| |
| AVR32: Fix wrong pin setup for USART3 |
| |
| As reported by Gerhard Berghofer: |
| |
| in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18 |
| instead of PB18 and PB19. |
| |
| which is obviously correct. There's currently no code that uses |
| USART3, but custom boards may run into problems. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Nov 1 12:44:20 2007 +0100 |
| |
| README: Remove ATSTK1000 daughterboard list |
| |
| As noted by Kim Phillips, these lists tend to become out of date. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit c81cbbad21cb0ae983e2e796211202234cdc8be2 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Tue Oct 30 14:56:36 2007 +0100 |
| |
| Add ATSTK100[234] to MAINTAINERS |
| |
| Add all the ATSTK1000 daughterboards to MAINTAINERS along with their |
| "mother". Also update the entry for ATSTK1000 to be not only about the |
| AP7000 CPU; it's intended to handle all CPUs in the AT32AP family. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 64ff2357b1727213803591813dbc779c924bf772 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Mon Oct 29 13:02:54 2007 +0100 |
| |
| AVR32: Add support for the ATSTK1004 board |
| |
| ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU, |
| which is a derivative of AT32AP7000. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 667568db157f374b85abd7e03596ddd1f0b25681 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Mon Oct 29 13:02:54 2007 +0100 |
| |
| AVR32: Add support for the ATSTK1003 board |
| |
| ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU, |
| which is a derivative of AT32AP7000. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 5fee84a794a51ec830548cda485a770efb018b92 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Mon Oct 29 13:23:33 2007 +0100 |
| |
| AVR32: Make some AT32AP700x peripherals optional |
| |
| Add a chip-features file providing definitions of the form |
| |
| AT32AP700x_CHIP_HAS_<peripheral> |
| |
| to indicate the availability of the given peripheral on the currently |
| selected chip. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 36f28f8a9605ee5dcfa330482cfc62171261af97 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Mon Oct 29 13:09:56 2007 +0100 |
| |
| AVR32: Rename at32ap7000 -> at32ap700x |
| |
| The SoC-specific code for all the AT32AP700x CPUs is practically |
| identical; the only difference is that some chips have less features |
| than others. By doing this rename, we can add support for the AP7000 |
| derivatives simply by making some features conditional. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri Jun 29 18:22:34 2007 +0200 |
| |
| atmel_mci: Show SR when block read fails |
| |
| Show controller status as well as card status when an error occurs |
| during block read. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Dec 13 14:52:53 2007 +0100 |
| |
| ppc4xx: Bring 4xx fdt support up-to-date |
| |
| This patch update the 4xx fdt support. It enabled fdt booting |
| on the AMCC Kilauea and Sequoia for now. More can follow later |
| quite easily. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 12d30aa79779c2aa7a998bbae4c075f822a53004 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Dec 13 12:56:34 2007 +0100 |
| |
| cfi_flash: Use map_physmem() and unmap_physmem() |
| |
| Use map_physmem() and unmap_physmem() to convert from physical to |
| virtual addresses. This gives the arch a chance to provide an uncached |
| mapping for flash accesses. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 4d7d6936eb29af7cca330937808312aa5f61454d |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Dec 13 12:56:33 2007 +0100 |
| |
| Introduce map_physmem() and unmap_physmem() |
| |
| map_physmem() returns a virtual address which can be used to access a |
| given physical address without involving the cache. unmap_physmem() |
| should be called when the virtual address returned by map_physmem() is |
| no longer needed. |
| |
| This patch adds a stub implementation which simply returns the |
| physical address cast to a uchar * for all architectures except AVR32, |
| which converts the physical address to an uncached virtual mapping. |
| unmap_physmem() is a no-op on all architectures, but if any |
| architecture needs to do such mappings through the TLB, this is the |
| hook where those TLB entries can be invalidated. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Dec 13 12:56:32 2007 +0100 |
| |
| cfi_flash: Introduce read and write accessors |
| |
| Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use |
| them to access the flash memory. This makes it clearer when the flash |
| is actually being accessed; merely dereferencing a volatile pointer |
| looks just like any other kind of access. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 812711ce6b3a386125dcf0d6a59588e461abbb87 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Dec 13 12:56:31 2007 +0100 |
| |
| Implement __raw_{read,write}[bwl] on all architectures |
| |
| This adds implementations of __raw_read[bwl] and __raw_write[bwl] to |
| m68k, ppc, nios and nios2. The m68k and ppc implementations were taken |
| from Linux. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sat Oct 6 18:55:36 2007 +0200 |
| |
| cfi_flash: Reorder functions and eliminate extra prototypes |
| |
| Reorder the functions in cfi_flash.c so that each function only uses |
| functions that have been defined before it. This allows the static |
| prototype declarations near the top to be eliminated and might allow |
| gcc to do a better job inlining functions. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 3055793bcbdf24b1f8117f606ffb766d32eb766f |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Dec 13 12:56:29 2007 +0100 |
| |
| cfi_flash: Make some needlessly global functions static |
| |
| Make functions not declared in any header file static. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 7e5b9b471518c5652febc68ba62b432193d6abf4 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Dec 13 12:56:28 2007 +0100 |
| |
| cfi_flash: Break long lines |
| |
| This patch tries to keep all lines in the cfi_flash driver below 80 |
| columns. There are a few lines left which don't fit this requirement |
| because I couldn't find any trivial way to break them (i.e. it would |
| take some restructuring, which I intend to do in a later patch.) |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Dec 11 13:59:57 2007 +0100 |
| |
| CFI: synchronize command offsets with Linux CFI driver |
| |
| Fixes non-working CFI Flash on the Inka4x0 board. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Dec 7 12:17:34 2007 -0600 |
| |
| Handle MPC85xx PCIe reset errata (PCI-Ex 38) |
| |
| On the MPC85xx boards that have PCIe enable the PCIe errata fix. |
| (MPC8544DS, MPC8548CDS, MPC8568MDS). |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Dec 7 12:04:30 2007 -0600 |
| |
| Update Freescale MPC85xx ADS/CDS/MDS board config |
| |
| * Enabled CONFIG_CMD_ELF |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit d435793229ce29a42797c1edc39f5b34f987f91a |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Fri Dec 7 04:59:26 2007 -0600 |
| |
| Handle Asynchronous DDR clock on 85xx |
| |
| The MPC8572 introduces the concept of an asynchronous DDR clock with |
| regards to the platform clock. |
| |
| Introduce get_ddr_freq() to report the DDR freq regardless of sync/async |
| mode. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 10:34:28 2007 -0600 |
| |
| Update Freescale MPC85xx ADS/CDS/MDS board config |
| |
| * Removed some misc environment setup |
| * Enabled CONFIG_CMDLINE_EDITING |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 415a613babb84d5e5d5b42e8e553868c71fc3a64 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 10:47:44 2007 -0600 |
| |
| Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale. |
| |
| Minor path corrections needed to ensure buildability. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 10:16:18 2007 -0600 |
| |
| Move the MPC8540 ADS board under board/freescale. |
| |
| Minor path corrections needed to ensure buildability. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 870ceac5b3a3486c109396e005af81ae762b5710 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 10:14:50 2007 -0600 |
| |
| Move the MPC8560 ADS board under board/freescale. |
| |
| Minor path corrections needed to ensure buildability. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit acbca876fb3fec25cd9c55b0efc81ff618ff5262 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 10:13:47 2007 -0600 |
| |
| Move the MPC8568 MDS board under board/freescale. |
| |
| Minor path corrections needed to ensure buildability. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit a853d56c59b33415304531443633808736acfc6e |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 02:18:59 2007 -0600 |
| |
| Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx |
| |
| We already had defines for LAWAR_TRGT_IF_* that we should use |
| rather than creating new ones. Also, added some missing defines for |
| PCIE targets. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 04db400892da37b76a585e332a0c137954ad2015 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 02:10:09 2007 -0600 |
| |
| Stop using immap_t on 85xx |
| |
| In the future the offsets to various blocks may not be in same location. |
| Move to using CFG_MPC85xx_*_ADDR as the base of the registers |
| instead of getting it via &immap. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 2714223f8e04ab3e4133ff65872eef366d90bfea |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 01:23:09 2007 -0600 |
| |
| Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit c480861bf000156e6a3e932c258db59ff2212dd3 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 01:06:19 2007 -0600 |
| |
| Update MPC8568 MDS to use libfdt |
| |
| Updated the MPC8568 MDS config to use libfdt and assume use of aliases for |
| ethernet, pci, and serial for the various fixups that are done. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Wed Nov 14 15:52:06 2007 -0500 |
| |
| Add PCI Express support on MPC8568MDS |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit b90d25497625b90ffa3f2911a0895ca237556ff5 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 00:11:44 2007 -0600 |
| |
| Update MPC85xx CDS to use libfdt |
| |
| Updated the MPC85xx CDS config to use libfdt and assume use of aliases for |
| ethernet, pci, and serial for the various fixups that are done. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Nov 28 22:54:27 2007 -0600 |
| |
| Update MPC8540 ADS to use libfdt |
| |
| Updated the MPC8540 ADS config to use libfdt and assume use of aliases for |
| ethernet, pci, and serial for the various fixups that are done. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 5ce715802f6c50dc78b3405b92f184b1e3710519 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Nov 28 22:40:31 2007 -0600 |
| |
| Update MPC8560 ADS to use libfdt |
| |
| Updated the MPC8560 ADS config to use libfdt and assume use of aliases for |
| ethernet, pci, and serial for the various fixups that are done. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit aafeefbdb8b029f5ca2a195598d0a501a606eea9 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Nov 28 00:36:33 2007 -0600 |
| |
| Stop using immap_t for cpm offset on 85xx |
| |
| In the future the offsets to various blocks may not be in same location. |
| Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers |
| instead of getting it via &immap->im_cpm. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f59b55a5b8fcadaa99781ba48e7a38e956afa527 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Nov 27 23:25:02 2007 -0600 |
| |
| Stop using immap_t for guts offset on 85xx |
| |
| In the future the offsets to various blocks may not be in same location. |
| Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers |
| instead of getting it via &immap->im_gur. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 50c03c8cf494d91cdec39670d95337c743e16ec9 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Nov 27 22:42:34 2007 -0600 |
| |
| Update MPC8544 DS config |
| |
| * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2 |
| * Removed some misc environment setup |
| * Moved to using fdtfile & fdtaddr as fdt env var names |
| * Enabled CONFIG_CMDLINE_EDITING |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit addce57e2e4c49e77ffb2020a84690713bb18b47 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Nov 26 17:12:24 2007 -0600 |
| |
| Update MPC8544DS to use libfdt |
| |
| Updated the MPC8544DS config to use libfdt and assume use of aliases for |
| ethernet, pci, and serial for the various fixups that are done. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Nov 29 00:15:30 2007 -0600 |
| |
| Add libfdt based ft_cpu_setup for mpc85xx |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Dec 11 13:38:19 2007 +0100 |
| |
| ppc4xx: Correct GPIO offset in gpio_config() |
| |
| Thanks to Gary Jennejohn for pointing this out. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8809a2713b1ceaf3da55d9d785470294f15de06a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Dec 11 11:46:01 2007 +0100 |
| |
| rtc: Fix merging problem |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Dec 8 14:47:34 2007 +0100 |
| |
| ppc4xx: 405EX: Correctly enable USB pins |
| |
| This patch selects the USB data pins in the 405EX GPIO and MFC (multi |
| function control) registers. This is done for the AMCC Kilauea and |
| Makalu eval boards. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Dec 8 08:25:09 2007 +0100 |
| |
| CFI: Coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22 |
| Author: Michael Schwingen <michael@schwingen.org> |
| Date: Fri Dec 7 23:35:02 2007 +0100 |
| |
| CFI: support JEDEC flash roms in CFI-flash framework |
| |
| The following patch adds support for non-CFI flash ROMS, by hooking into the |
| CFI flash code and using most of its code, as recently discussed here in the |
| thread "Mixing CFI and non-CFI flashs". |
| |
| Signed-off-by: Michael Schwingen <michael@schwingen.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c01b17dd856fa120b2970f50d9598546a4927ec3 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Wed Nov 28 21:24:50 2007 -0500 |
| |
| Conditionally compile fdt_fixup_ethernet() |
| |
| Fix compiler warnings: On boards that don't have ethernets defined, |
| don't compile fdt_fixup_ethernet(). |
| |
| commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Nov 27 21:59:46 2007 -0600 |
| |
| Convert boards that set memory node to use fdt_fixup_memory() |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Nov 26 17:06:15 2007 -0600 |
| |
| Added fdt_fixup_stdout that uses aliases to set linux,stdout-path |
| |
| We use a combination of the serialN alias and CONFIG_CONS_INDEX to |
| determine which serial alias we should set linux,stdout-path to. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Nov 26 14:57:45 2007 -0600 |
| |
| Add common memory fixup function |
| |
| Add the function fdt_fixup_memory() to fixup the /memory node of the fdt |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Nov 26 11:19:12 2007 -0600 |
| |
| Conditionally compile fdt_support.c |
| |
| Modify common/Makefile to conditionally compile fdt_support.c based |
| on CONFIG_OF_LIBFDT. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit d88e7ba0980773479e1a64badb293116071b7ef0 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Nov 26 10:41:40 2007 -0600 |
| |
| Fix build breakage due to libfdt import |
| |
| The IDS8247 got lost in the update and need an API update |
| do to rename of functions in libfdt. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Fri Nov 23 19:43:20 2007 -0500 |
| |
| Add spaces around the = in the fdt print format. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 29592ecba3b932b9b152bcec6c0c0806412db4a3 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Fri Dec 7 01:25:38 2007 +0900 |
| |
| sh: Moved driver of the SuperH dependence |
| |
| The composition of the directory in the drivers/ changed. |
| I moved SuperH serial driver and marubun PCMCIA driver. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Dec 6 10:21:19 2007 +0100 |
| |
| Release v1.3.1 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Dec 6 10:21:03 2007 +0100 |
| |
| ADS5121 Board: fix compile problem. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit a27044b14a9e93678a82d7b35f202b93e7687abc |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Dec 6 05:58:43 2007 +0100 |
| |
| ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards |
| |
| This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by |
| setting the FIXD bit in the SDR0_MFR register. Here a description of the |
| symptoms: |
| |
| Problem Description |
| ------------------------------ |
| If a DMA is performed between memory and PCI with the DMA 1 Controller |
| using prefetch, and as a result uses a special purpose buffer selected by |
| the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29), |
| the first part of the transfer sequence is performed twice. The |
| PPC440SPe PCI Controller requests more data than was needed such that in |
| the case of enforce memory protection, a host CPU exception can occur. |
| No data is corrupted, because data transfer is stopped in the PCI |
| Controller. Prefetch enable is specified by setting DMA Configuration |
| Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0. |
| |
| Behavior that may be observed in a running system |
| --------------------------------------------------------------------------- |
| |
| 1. DMA performance is decreased because of the double access on the PCI bus |
| interface. |
| 2. If an illegal access to some address on the PCI bus is detected at the |
| system level, a machine check or similar system error may occur. |
| |
| Workarounds Available |
| ---------------------------------- |
| |
| 1. Do not program prefetch. Note that a prefetch command cannot be programmed |
| without selecting a special purpose buffer. |
| 2. To avoid crossing a physical boundary of the PCI slave device, add 512 |
| bytes of address to the PCI address range. |
| |
| This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com> |
| from AMCC and slighly changed. |
| |
| Signed-off-by: Pravin M. Bathija <pbathija@amcc.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Dec 4 16:29:48 2007 +0100 |
| |
| ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Dec 3 00:15:28 2007 +0100 |
| |
| Prepare for 1.3.1-rc1 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e15e33433e7c05111968dc9b434a52fd42cbd221 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Nov 30 07:15:41 2007 +0100 |
| |
| ppc4xx: Kilauea: Add PCIe reset assertion upon power-up |
| |
| This manual PCIe reset triggering solves the problem seen with the |
| Intel EPRO/1000 card, which was not detected (link not established) |
| upon power-up reset. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 260eea5676ca46903a335686cc020b29c4ca46fe |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Thu Nov 29 01:21:54 2007 +0900 |
| |
| sh: Add SuperH boards maintainer to MAINTAINERS file |
| |
| Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Thu Nov 29 00:13:04 2007 +0900 |
| |
| sh: Add ms7750se support in MAKEALL |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit c7144373427a178332bf9754131c8c34c52c200a |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Nov 27 09:44:53 2007 +0100 |
| |
| sh: Add sh3 and sh4 support in MAKEALL |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 130080874a3d28450098481a262c5f7c855e908d |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Nov 25 02:51:17 2007 +0900 |
| |
| sh: Add document for SuperH. |
| |
| This document is a summary of information concerning SuperH of U-Boot. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Nov 25 02:39:31 2007 +0900 |
| |
| sh: Add marubun's pcmcia driver |
| |
| Marubun pcmcia is a chip for PCMCIA used with SuperH. |
| Of course, this can be used even by other architectures. |
| When use this driver, came to be able to use CompactFlash |
| and Ethernet. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit febd86b969b975289ed948f1ac0eb9722da41ced |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Nov 25 02:32:13 2007 +0900 |
| |
| sh: Update SuperH SCIF driver |
| |
| - Changed volatile unsigned to vu_. |
| - Changed Makefile for kconfig. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 8be760903645af09871be50ad0a6f9ebb62b311d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Nov 27 11:57:35 2007 +0100 |
| |
| ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing |
| |
| After an error in the AMCC 405EX users manual now correctly configure |
| IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ |
| usage. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Nov 26 19:18:21 2007 +0100 |
| |
| Cleanup coding style; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Nov 25 22:39:25 2007 +0100 |
| |
| MAKEALL: add missing 512x boards in ppc |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit a340c325e668ca7386c2276387681720be9c3757 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Nov 25 18:45:47 2007 +0100 |
| |
| Makefile : fix tags ctags etags with new drivers organization |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 26 15:06:14 2007 +0100 |
| |
| ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage |
| |
| As suggested by Senao, use a different EBC_PB0AP setup for 400MHz |
| operation. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ca1ce226287270bb01e25b8e3674c701f12edf19 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 26 15:01:45 2007 +0100 |
| |
| ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Nov 25 18:45:47 2007 +0100 |
| |
| Makefile : fix tags ctags etags with new drivers organization |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 59829cc189378c142c13d2aa8d9a897d8bef3961 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 24 21:26:56 2007 +0100 |
| |
| drivers/mtd : move mtd drivers to drivers/mtd |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 318c0b90431f2648552e5ade78833f42652ce859 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 24 21:17:55 2007 +0100 |
| |
| drivers/misc : move misc drivers to drivers/misc |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 33daf5b7858807cb4ce4158c2c56524671c14c08 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 24 21:13:59 2007 +0100 |
| |
| drivers/block : move block drivers to drivers/block |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 0c698dcaa70275eb8814f665b545547cee013892 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 24 20:59:50 2007 +0100 |
| |
| drivers/rtc : move rtc drivers to drivers/rtc |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit f868cc5a50757d94f36c312395481cb0f187d9e6 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 24 20:14:44 2007 +0100 |
| |
| drivers/hwmon : move hardware monitor drviers to drivers/hwmon |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 16b195c82a18cbfd164800f17a1ef9db2e48331a |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 24 19:46:45 2007 +0100 |
| |
| drivers/input : move input drivers to drivers/input |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit e4558666293364fc3af1c1d9381ca933fa0f1275 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 24 19:40:11 2007 +0100 |
| |
| drivers/usb : move usb drivers to drivers/usb |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 1378df792a7ff3abd1bf54a63f5475784f5b083c |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 24 19:33:38 2007 +0100 |
| |
| drivers/serial : move serial drivers to drivers/serial |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 2439e4bfa111babf4bc07ba20efbf3e36036813e |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Nov 21 21:19:24 2007 +0100 |
| |
| drivers/net : move net drivers to drivers/net |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 352d259130b349fe9593b8dada641bd78a9659e5 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Nov 20 20:41:48 2007 +0100 |
| |
| drivers/video : move video drivers to drivers/video |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 73646217186aa17afc8e305c5f06f06dd335eaad |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Nov 20 20:33:09 2007 +0100 |
| |
| drivers/pcmcia : move pcmcia drivers to drivers/pcmcia |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Nov 20 20:28:09 2007 +0100 |
| |
| drivers/pci : move pci drivers to drivers/pci |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 9162352817579840d7802da6d85872b3ca003c97 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Thu Nov 22 17:23:23 2007 -0500 |
| |
| Fix fdt printing for updated libfdt |
| |
| Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Nov 21 13:30:15 2007 -0600 |
| |
| Add additional fdt fixup helper functions |
| |
| Added the following fdt fixup helpers: |
| * do_fixup_by_prop{_u32} - Find matching nodes by property name/value |
| * do_fixup_by_compat{_u32} - Find matching nodes by compat |
| |
| The _u32 variants work the same only the property they are setting |
| is know to be a 32-bit integer instead of a byte buffer. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit ab544633abdd14f4dd5d92e500b73eb59ef57e67 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Nov 21 11:11:03 2007 -0600 |
| |
| Add fdt_fixup_ethernet helper to set mac addresses |
| |
| Added a fixup helper that uses aliases to set mac addresses |
| in the device tree based on the bd_t |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit dbaf07ce620aab249e3502b20a986234a6af1d3a |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Nov 21 14:07:46 2007 -0600 |
| |
| Fix warnings from import of libfdt |
| |
| cmd_fdt.c: In function fdt_print: |
| cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type |
| cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type |
| cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type |
| cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 8d04f02f6224e6983f4812ea4da704950ec8539c |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Oct 24 11:04:22 2007 -0500 |
| |
| Update libfdt from device tree compiler (dtc) |
| |
| Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from |
| the device tree compiler (dtc) project. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit e93becf80d732b64aef81b23e8b6ece02c40533d |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Sat Nov 3 19:46:28 2007 -0500 |
| |
| Move do_fixup* for libfdt into common code |
| |
| Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260 |
| into common/fdt_support.c and renamed: |
| |
| do_fixup() -> do_fixup_by_path() |
| do_fixup_u32() -> do_fixup_by_path_u32() |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f738b4a75998f42a7408defadc9baac7a31c92db |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Oct 25 16:15:07 2007 -0500 |
| |
| Make no options to fdt print default to '/' |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Oct 24 10:21:57 2007 -0500 |
| |
| Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt |
| |
| Removed: |
| fdt_node_is_compatible |
| fdt_find_node_by_type |
| fdt_find_compatible_node |
| |
| To ease merge of newer libfdt as we aren't using them anywhere at this time. |
| |
| Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same |
| reason. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 98e2867cc85409b919f862e6c16026461ec955df |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Wed Nov 21 09:19:37 2007 -0700 |
| |
| [BUILD] Remove libraries when updating autoconf.mk |
| |
| Fix library problems caused by conditional compilation. Using |
| autoconf.mk to decide which files to compile has caused a problem when |
| changing configuration from one board to another without clearing out |
| the library (*.a) files. |
| |
| It used to be that the linker was always passed the same list of .o |
| files when building the .a files. However, that is not longer true |
| with conditional compilation. Now, a different board config will have |
| a different file list passed to the linker. The problem occurs when |
| a library has already been built and the board config is changed. |
| |
| Since the linker will update instead of replace a preexisting library, |
| then if the file list changes to remove some object files the old |
| objects will still exist in the library. |
| |
| The solution is to remove all old library files when autoconf.mk is |
| made. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit ed1353d74b9ce8a7fcd660570b848a184d614b5f |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Nov 21 08:49:50 2007 -0600 |
| |
| [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile |
| |
| Modify libfdt/Makefile to conditionally compile the *.c files based |
| on the board config. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 4a43719a7738712811d822ca8125427b27a55cdc |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:31 2007 -0600 |
| |
| [BUILD] conditionally compile common/cmd_*.c in common/Makefile |
| |
| Modify common/Makefile to conditionally compile the cmd_*.c files based |
| on the board config. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:31 2007 -0600 |
| |
| [BUILD] Generate include/autoconf.mk from board config files |
| |
| Use cpp and sed to postprocess config.h and import the defined values |
| into include/autoconf.mk. autoconf.mk is then included by config.mk to |
| give 'make' access to the board configuration. |
| |
| Doing this enables conditional compilation at the Makefile level instead |
| of by wrapping every .c file with #ifdef/#endif wrappers. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 68b88999da87ab88e71e1306192905be3450198e |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Nov 20 15:02:26 2007 -0600 |
| |
| 8610HPCD: Enable the 8610 Display Interface Unit |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 74f89faa9d1e77ed947e628d3effaa513fe05d05 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Nov 20 15:00:53 2007 -0600 |
| |
| Move 8610 DIU interface structure definitions to header file. |
| |
| These two structures are still needed during the |
| initialization and setup of the DIU hardware. |
| So move them to the fsl_diu_fb.h file for now. |
| Official "blah". |
| |
| Noticed-by: York Sun <yorksun@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 080c646dbf474a109c3f85718fb01ce042a38c45 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Nov 20 20:14:18 2007 +0100 |
| |
| drivers/i2c : move i2c drivers to drivers/i2c |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 9a337ddc154a10a26f117fd147b009abcdeba75a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Nov 19 22:20:24 2007 +0100 |
| |
| Prepare for 1.3.0 release. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit f30ad49b16bf998b03c1a5228b6c86369d61c258 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Mon Nov 19 10:02:13 2007 -0500 |
| |
| Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS |
| |
| CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit f8c320609366176b31104d9bf5e295232e1c7f1d |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Mon Nov 19 11:14:16 2007 +0900 |
| |
| [MIPS] board/gth2/lowlevel_init.S: Fix a build warning |
| |
| lowlevel_init.S: Assembler messages: |
| lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local. |
| |
| Looking at codes, the `memtest' and `clearmem' are intentional mixed |
| use of `global symbols' and `label' for debugging purpose. To make it |
| build, just disable global-symbols-use for now. As a result `memtest' |
| still remains as unused, but leave it be... |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Nov 19 12:59:14 2007 +0100 |
| |
| Fix build problems with mp2usb board |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 6bf4c686afca1e86e1c384d59218f914605713bf |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Nov 18 18:36:11 2007 +0100 |
| |
| s3c24x0: Fix usb_ohci.c missing in Makefile |
| and usb_ohci.c warning differ in signedness |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 6073f61e078da5ddb521b56256bcc36508589883 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Nov 18 12:55:02 2007 +0100 |
| |
| pb1x00 board: Fix u16 status declaration when PCMCIA is defined |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 8412d814ce8bf5570a2b747f1e7fd321097fe987 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Nov 18 17:11:09 2007 +0100 |
| |
| Fix compiler warnings for ARM systems. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Nov 18 16:36:27 2007 +0100 |
| |
| Fix compiler warnings for PPC systems. Update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 653811a3c2b35856bf12e196dcc8c4694e28e420 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sun Nov 18 14:44:44 2007 +0100 |
| |
| ppc4xx: Correct 405EX PCIe UTL register mapping |
| |
| Map 4k mem space for UTL registers for each port. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 079c2c4fa71c0d1ebef394508df9088df8a308d3 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Nov 17 11:31:10 2007 +0100 |
| |
| Fix warning differ in signedness in net/net.c and net/nfs.c |
| |
| commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Nov 17 20:42:45 2007 +0900 |
| |
| gth2.c: Fix a warning on gth2 build. |
| |
| gth2.c: In function 'misc_init_r': |
| gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 2309c130aa4c84b91bd874a41269c923eb61b555 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Nov 17 07:58:25 2007 +0100 |
| |
| Fix warning differ in signedness in common/cmd_scsi.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9ea61b57968554eaf0f474ec7e088b17d367f474 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Nov 17 14:52:29 2007 +0100 |
| |
| ppc4xx: Update AMCC Kilauea config file |
| |
| - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Nov 17 20:05:26 2007 +0900 |
| |
| [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker |
| |
| Current trick to pick up GNU assembler minor version does not work with the |
| latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to |
| "(GNU Binutils) ". |
| |
| $ sde-as --version |grep "GNU assembler" |
| GNU assembler 2.15.94 mipssde-6.02.02-20050602 |
| $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |
| 2.15.94 |
| $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}' |
| 15 |
| $ |
| |
| $ mips-linux-as --version |grep "GNU assembler" |
| GNU assembler (GNU Binutils) 2.18 |
| $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |
| (GNU |
| $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}' |
| (no output) |
| $ |
| |
| As a result of above, you'll see many noises with such binutils: |
| |
| make -C cpu/mips/ |
| /bin/sh: line 0: [: : integer expression expected |
| /bin/sh: line 0: [: : integer expression expected |
| make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips' |
| mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S |
| /bin/sh: line 0: [: : integer expression expected |
| mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S |
| /bin/sh: line 0: [: : integer expression expected |
| mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c |
| /bin/sh: line 0: [: : integer expression expected |
| |
| This patch simplifies the trick and makes it work with both versions of gas. |
| I also replace an expensive `awk (or gawk)' with `cut'. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 16664f72850846e645616da1c0fa5afcd6d15f15 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Nov 17 20:05:26 2007 +0900 |
| |
| [MIPS] Remove useless instructions for initializing $gp. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 03c031d5660ea946c39af6e2e16267da857c609f |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Oct 27 15:27:06 2007 +0900 |
| |
| [MIPS] MIPS 4K core: Coding style cleanups |
| |
| No logical changes. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit f5e429d3860bba4c6ae8bead8f78349fa24491b2 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Nov 17 20:05:20 2007 +0900 |
| |
| [MIPS] gth2.c: Fix a warning on gth2 build. |
| |
| gth2.c: In function 'misc_init_r': |
| gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 4fbd0741b2b6441da10be93e10267122581b7079 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Oct 27 15:22:33 2007 +0900 |
| |
| [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build. |
| |
| au1x00_eth.c: In function 'au1x00_miiphy_write': |
| au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit f01320459736f156707425cf8112f98606301aa4 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Oct 27 15:00:25 2007 +0900 |
| |
| [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error |
| |
| au1x00_eth.c: In function 'au1x00_enet_initialize': |
| au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function) |
| au1x00_eth.c:246: error: (Each undeclared identifier is reported only once |
| au1x00_eth.c:246: error: for each function it appears in.) |
| au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function) |
| au1x00_eth.c: In function 'au1x00_miiphy_write': |
| au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void |
| make[1]: *** [au1x00_eth.o] Error 1 |
| |
| Fixed by moving these two functions forward. |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit b09258c5393edd1087c5f39ae68338f16b49f8b3 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Oct 27 15:00:25 2007 +0900 |
| |
| MAKEALL: Added missing pb1000 board |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Oct 27 15:00:24 2007 +0900 |
| |
| [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Sat Oct 27 15:00:24 2007 +0900 |
| |
| [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end} |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit 5947f6999aafa7c54c1390983d264a8463dfea8e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Nov 17 02:34:38 2007 +0100 |
| |
| Update CHANGELOIG, prepare for -rc4 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5 |
| Author: Luotao Fu <l.fu@pengutronix.de> |
| Date: Wed Nov 14 18:58:33 2007 +0100 |
| |
| Fix the i2c frequency and default address in rsdproto board |
| |
| rsdproto board support has wrong I2C frequency and wrong return value |
| handling. |
| |
| Signed-off-by: Luotao Fu <l.fu@pengutronix.de> |
| |
| commit 429c180edad038f91c989cb14b478228092e7054 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Nov 17 01:45:38 2007 +0100 |
| |
| powerpc: Backout relocation changes for MPC5121, too. |
| |
| Apply Grant Likely's backout to MPC5121 code, too. |
| |
| Pointed out by Rafal Jaworowski <raj@semihalf.com> |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Nov 13 22:18:33 2007 -0700 |
| |
| powerpc: Backout relocation changes. |
| |
| Ugh. I *hate* to back this change out, but these compiler flags don't |
| work for relocation on all versions of GCC. I've not been able to |
| reproduce the environment in my setup (and hence, not been able to |
| find a combination that *does* work), so I've got no choice but to go |
| back to the old gcc flags and linker script. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 5c15010efad980ad5498cc565fc1ed70df2f52b4 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Tue Nov 13 09:11:05 2007 +0100 |
| |
| Fixed mips_io_port_base build errors. |
| |
| This patch has been sent on: |
| - 29 Sep 2007 |
| |
| Although mips_io_port_base is currently a part of IDE command, it is quite |
| fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move |
| it to MIPS general part, and introduce `set_io_port_base()' from Linux. |
| |
| This patch is triggered by multiple definition of `mips_io_port_base' build |
| error on gth2 (and tb0229 also needs this fix.) |
| |
| board/gth2/libgth2.a(gth2.o): In function `log_serial_char': |
| /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base' |
| common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here |
| make: *** [u-boot] Error 1 |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Nov 17 01:30:40 2007 +0100 |
| |
| Fix a bug in the slave serial programming mode for the Xilinx |
| Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if |
| the most significant bit was set, which did not work on any |
| architecture where "char" defaulted to be an unsigned type. |
| |
| Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com> |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit d08b7233bc252faad8339e7ca0ddfd62fa79903c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Nov 1 12:23:29 2007 -0500 |
| |
| 86xx: Fix broken variable reference when #def DEBUGing. |
| |
| Sometimes you can't reference the DDR2 controller variables. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Oct 26 18:32:00 2007 +0800 |
| |
| make 8610 board use pixis reset |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Mon Oct 29 19:26:21 2007 +0800 |
| |
| Unify pixis_reset altbank across board families |
| |
| Basically, refactor the CFG_PIXIS_VBOOT_MASK values |
| into the separate board config files. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 64bf555465c7926be13e1046ac0d0f05ac72829c |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Nov 7 08:19:21 2007 +0100 |
| |
| Fix warning: pointer targets in assignment differ in signedness |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 7a60ee7c6248a958c5757d3660a1702723a2786d |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Nov 7 08:19:19 2007 +0100 |
| |
| Fix warning differ in signedness in common/cmd_ide.c |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Nov 16 14:16:54 2007 +0100 |
| |
| ppc4xx: Enable 405EX PCIe UTL register configuration |
| |
| Till now the UTL registers on 405EX were not initialized but left with |
| their default values. This patch new initializes some of the UTL |
| registers on 405EX. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Nov 16 14:00:59 2007 +0100 |
| |
| ppc4xx: Update AMCC Makalu for board rev 1.1 |
| |
| This patch adds changes needed for Makalu rev 1.1: |
| |
| - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM |
| - Enable 2nd ethernet port EMAC1 |
| - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE) |
| - Reset PCIe ports via GPIO upon bootup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4d4faae65e115e327425cd514c1a35146a85166b |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:31 2007 -0600 |
| |
| Group PCI and PCMCIA drivers in drivers/Makefile |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 5798f87dc10a496d79d3177b9f5a76488987fd35 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:31 2007 -0600 |
| |
| Group block/flash drivers in drivers/Makefile |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit df58c81551700f058b44cacf55a7997fa63bfe0a |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:31 2007 -0600 |
| |
| Group USB drivers in drivers/Makefile |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:30 2007 -0600 |
| |
| Group i2c drivers in drivers/Makefile |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit ec00c76de0e5971273905998d62d6bb119324218 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:30 2007 -0600 |
| |
| Group console drivers in drivers/Makefile |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 754f230aa01b8c789fc31f8013c2487954073300 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:30 2007 -0600 |
| |
| Group network drivers in drivers/Makefile |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f0037c56b0d12cd46215124667b9f83d60ef9391 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:30 2007 -0600 |
| |
| Build: split COBJS value into multiple lines |
| |
| This change is in preparation for condtitionial compile support in the |
| build system. By spliting them all into seperate lines now, subsequent |
| patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will |
| be less invasive and easier to review |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Mon Sep 24 09:05:30 2007 -0600 |
| |
| Add .gitignore files |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| Acked-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 955413f35f054a82e40042f1dbcf501c6a05719b |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Nov 15 08:27:52 2007 -0700 |
| |
| Revert "Correct relocation fixup for mpc5xx" |
| |
| This reverts commit 3649cd99ba815b6601868735765602f00ef3692b. |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit e15633888a058aacb31a62d2cf1278e1e4c236ab |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Nov 15 08:24:32 2007 -0700 |
| |
| Revert "Correct fixup relocation for MPC5xxx" |
| |
| This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90. |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 139365fbe566d0fc619a1ed04452ec5388f0cef8 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Nov 15 08:21:04 2007 -0700 |
| |
| Revert "Correct fixup relocation for mpc8220" |
| |
| This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00. |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 70922342369e5e39b286fe21e768a239ca07a514 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Nov 15 08:20:57 2007 -0700 |
| |
| Revert "Correct fixup relocation for mpc824x" |
| |
| This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa. |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Nov 15 08:20:50 2007 -0700 |
| |
| Revert "Correct fixup relocation for mpc8260" |
| |
| This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96. |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Nov 15 08:20:43 2007 -0700 |
| |
| Revert "Correct fixup relocation for mpc83xx" |
| |
| This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27. |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit c93945e8f9e300860d2bf73a2549ce5794f8bd00 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Nov 15 08:20:25 2007 -0700 |
| |
| Revert "[MPC512x] Correct fixup relocation" |
| |
| This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4. |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Nov 15 14:25:09 2007 +0100 |
| |
| ppc4xx: Small AMCC Kilauea cleanup |
| |
| Remove not needed pci_target_init() function. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit aee747f19b460a0e9da20ff21e90fdaac1cec359 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Nov 15 14:23:55 2007 +0100 |
| |
| ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms |
| |
| - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE |
| - Cleanup of the 4xx GPIO functions |
| - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8ada0ebf38e4073beea0309188b25d82a112a2ae |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Nov 15 14:20:08 2007 +0100 |
| |
| ppc4xx: AMCC Taihu board config file cleanup |
| |
| This patch makes the AMCC Taihu a little more compatible to the other |
| AMCC eval boards. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5e71c51d74c963d3174060c078dcacf13bdd02ef |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Nov 15 13:37:28 2007 +0100 |
| |
| [INKA4x0] NG hardware: flash support |
| |
| Disabled and remove inka4x0 custom flash driver, use CFI flash |
| driver instead. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 5fb6d7191e206cdde0e23140fd8111caed93a595 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Nov 15 13:29:55 2007 +0100 |
| |
| [INKA4x0] NG hardware: SDRAM support |
| |
| Add support for three new DDR chips that may be present on a NG |
| INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT. |
| |
| Cleanup board/inka4x0/mt48lc16m16a2-75.h file. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit f23cb34c367bb27585a4fdb8a75277370e7d0596 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Thu Nov 15 13:24:43 2007 +0100 |
| |
| [INKA4x0] NG hardware: platform code update |
| |
| - Cleanup compile warnings. |
| - Add missing '\0' in default environment. |
| - Increase CFG_MONITOR_LEN to 256 KiB. |
| - Add required CFG_USE_PPCENV. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 2ae64f5135e51bb18753884d1265b99e89b5aedd |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Thu Nov 15 08:58:00 2007 +0000 |
| |
| Remove warnings re CONFIG_EXTRA_ENV_SETTINGS |
| Remove warnings re onenand_read() & write() |
| |
| commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Thu Nov 15 08:45:13 2007 +0000 |
| |
| Correction patch |
| |
| commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae |
| Author: Roy Zang <tie-fei.zang@freescale.com> |
| Date: Thu Sep 13 18:52:28 2007 +0800 |
| |
| Enable ULi1575 Ethernet support in 8610HPCD config |
| |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 54fd6c93c28a0a45352fff5dd92673401ff563f2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Nov 13 08:18:20 2007 +0100 |
| |
| ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Nov 13 08:06:11 2007 +0100 |
| |
| ppc4xx: Fix 405EX PCIe UTLSET register setup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1ce55151c85d068f70317a8d65c61058b891afb4 |
| Author: Heiko Schocher <hs@denx.de> |
| Date: Tue Nov 13 07:50:29 2007 +0100 |
| |
| [UC101] SRAM now with 2 MB working. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 2d14684341109a69616e4d6016cd61402d55086f |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Nov 9 15:37:53 2007 +0100 |
| |
| ppc4xx: Use generic usb-ohci driver for sequoia board |
| |
| This patch makes the sequoia board use the generic usb-ohci driver |
| instead of cpu/ppc4xx/usb_ohci.c. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9be659ac0868dc367caa957c5c725e46b07f6a5f |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Nov 9 15:37:23 2007 +0100 |
| |
| ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined |
| |
| This patch disables the 44x d-cache on 'usb start' and |
| reenables it on 'usb stop'. This should be seen as a |
| temporary fix until the generic usb-ohci driver can |
| life with d-cache enabled. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Nov 9 15:36:44 2007 +0100 |
| |
| ppc4xx: Remove redundant code from 4xx network driver |
| |
| This patch removes some redundant code and decrements the end |
| address of cache flush and invalidate by 1. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5ca9881aad8c413ac2a82868a5e3719178254502 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Fri Nov 9 15:24:26 2007 +0000 |
| |
| Add apollon board support |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit b53313dbfc74525d85f1e7e0102f902d5c863beb |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Nov 9 12:19:58 2007 +0100 |
| |
| ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c7f69c340277935a6c19a956421852da944a365f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Nov 9 12:18:54 2007 +0100 |
| |
| ppc4xx: Make output a little shorter on I2C bootrom detection |
| |
| Most 4xx PPC capable of using an I2C bootrom for bootstrap setting |
| already print a line with the information which I2C bootrom is |
| used for bootstrap configuration. So we don't need this extra line |
| with "I2C boot EEPROM en-/dis-abled". |
| |
| This patch also has a little code cleanup integrated. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8d737a28152ec12873f8544cca1fb39a49e5e693 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Nov 8 12:50:18 2007 -0600 |
| |
| ColdFire: MCF5329 - Remove reset registers from CCM |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Nov 8 12:31:11 2007 -0600 |
| |
| ColdFire: MCF5329 - Add Reset structure to immap_5329.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Nov 8 12:19:01 2007 -0600 |
| |
| ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 225a24b5e062ad94627424508ae814f51dbe1a34 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Nov 7 18:00:54 2007 -0600 |
| |
| ColdFire: MCF5445x - Update correct RAMBAR and missing linker files |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 248c7c14835f34d5d910b45e5600050e58ca6cab |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Nov 7 17:56:15 2007 -0600 |
| |
| ColdFire: MCF532x - Update do_reset() using core reset |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Nov 7 17:51:00 2007 -0600 |
| |
| ColdFire: Update cpu flag for 4.2-xx compiler |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 070ba56115b4da63b46e974287fa4550d4023386 |
| Author: York Sun <yorksun@freescale.com> |
| Date: Wed Oct 31 14:59:04 2007 -0500 |
| |
| 8610: Add console frame buffer support to FSL 8610 DIU driver. |
| |
| Add cfb console support to FSL 8610 DIU driver. |
| Inspect board version from PIXIS to obtain correct pixel format. |
| |
| Use #define CONFIG_VIDEO in config file to enable fb console. |
| |
| To switch monitor, set monitor variable to |
| 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS |
| followed by "diufb init". |
| |
| Preserve logo bitmap at the top of the fb console. |
| |
| Signed-off-by: York Sun <yorksun@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a877880c6949e948bd63cd6ea4e216573d2f53dd |
| Author: York Sun <yorksun@freescale.com> |
| Date: Mon Oct 29 13:58:39 2007 -0500 |
| |
| 8610: Add 8610 DIU display driver |
| |
| 1280x1024 and 1024x768 @ 32 bpp are supported now. |
| DVI, Single-link LVDS, Double-link LVDS are all supported. |
| |
| Environmental variable "monitor" is used to specify monitor port. |
| |
| A new command "diufb" is introduced to reinitialize monitor |
| and display a BMP file in the memory. So far, 1-bit, 4-bit, |
| 8-bit and 24-bit BMP formats are supported. |
| |
| diufb init |
| - initialize the diu driver |
| Enable the port specified in the environmental variable "monitor" |
| |
| diufb addr |
| - display bmp file in memory. |
| The bmp image should be no bigger than the resolution, 1280x1024 |
| for DVI and double-link LVDS, 1024x768 for single-link LVDS. |
| |
| Note, this driver allocate memory but doesn't free it after use |
| It is written on purpose -- to avoid a failure of reallocation |
| due to memory fragement. |
| |
| ECC of DDR is disabled for DIU performance. L2 data cache is also disabled. |
| |
| Signed-off-by: York Sun <yorksun@freescale.com> |
| Signed-off-by: Jon loeliger <jdl@freescale.com> |
| |
| commit 52e5ddfecdda308f75782fae206b677b1810f5f9 |
| Author: York Sun <yorksun@freescale.com> |
| Date: Wed Oct 31 10:43:59 2007 -0500 |
| |
| FSL: Add a freescale bitmap logo. |
| |
| This Freescale logo is a 340 x 128 x 4bpp BMP file |
| that can be displayed by the DIU Framebuffer driver. |
| |
| Signed-off-by: York Sun <yorksun@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1815338fbd1c0f94f8276d2891b99caa5a05f622 |
| Author: York Sun <yorksun@freescale.com> |
| Date: Mon Oct 29 13:57:53 2007 -0500 |
| |
| 8610: Make some extra debug environment variables conditional. |
| |
| One may #define ENV_DEBUG to get them back again. |
| |
| Signed-off-by: York Sun <yorksun@freescale.com> |
| |
| commit 761421ccca80a9fb37b19c37aa61d46ef75e0647 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Mon Oct 29 19:26:21 2007 +0800 |
| |
| 8610: Actually enable pixis_reset CONFIGs |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit f3bceaab230b4748d0afc4109b6837308f018b40 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Oct 26 18:31:59 2007 +0800 |
| |
| Fix the BAT definition of PCI IO on 8610 board |
| |
| The address in the BAT register is aligned with the BAT size. |
| The original definition actually did not define BAT for PCIE2 IO. |
| This patch fix this. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Mon Oct 29 19:26:21 2007 +0800 |
| |
| Unify pixis_reset altbank across board families |
| |
| Basically, refactor the CFG_PIXIS_VBOOT_MASK values |
| into the separate board config files. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Oct 26 18:32:00 2007 +0800 |
| |
| make 8610 board use pixis reset |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 9c84709eedce9c680dd695984ab7d2328f4f04f5 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Nov 1 12:23:29 2007 -0500 |
| |
| 86xx: Fix broken variable reference when #def DEBUGing. |
| |
| Sometimes you can't reference the DDR2 controller variables. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58 |
| Author: Roy Zang <tie-fei.zang@freescale.com> |
| Date: Mon Nov 5 17:39:24 2007 +0800 |
| |
| Implement general ULi 526x Ethernet driver support in U-boot |
| |
| This patch implements general ULi 526x Ethernet driver. |
| Until now, it is the only native Ethernet port on |
| MPC8610HPCD board, but it could be used on other boards |
| with ULi 526x Ethernet port as well. |
| |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Thu Nov 1 08:46:50 2007 -0500 |
| |
| NET: Add Ethernet 1000BASE-X support for PPC4xx |
| |
| This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and |
| "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which |
| returns non-zero iff the PHY registers are configured for 1000BASE-X. The |
| "mii info" command is modified to distinguish between 1000BASE-T and -X. |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 298035df4948b113d29ac0e694717d34b95bc5dc |
| Author: Larry Johnson <lrj@arlinx.com> |
| Date: Wed Oct 31 11:21:29 2007 -0500 |
| |
| NET: Cosmetic changes |
| |
| Signed-off-by: Larry Johnson <lrj@acm.org> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 654f38b3a387886996a5a75771fbfc29cb4f225e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 5 07:43:05 2007 +0100 |
| |
| ppc4xx: Make output a little shorter on PCIe detection |
| |
| Now not max 3 lines but 2 lines are printed per PCIe port. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 992742a5b09d9040adbd156fb90756af66ade310 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Nov 3 23:09:27 2007 +0100 |
| |
| Cleanup coding style; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e881cb563e32f45832b7b6db77bdcd017adcbb41 |
| Author: Bruce Adler <bruce.adler@ccpu.com> |
| Date: Fri Nov 2 13:15:42 2007 -0700 |
| |
| fix wording in README |
| |
| Changed the wording to properly describe the shadowing |
| of the environment from ROM to RAM |
| |
| Signed-off-by: Bruce Adler <bruce.adler@acm.org> |
| |
| commit ad845beef06245426c57b53dcdc01b7dc70e0d45 |
| Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| Date: Wed Oct 31 02:18:15 2007 +0900 |
| |
| blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk |
| |
| Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> |
| |
| commit ec22755799466c8a103664bb3a5e647bf9c238f4 |
| Author: Vlad Lungu <vlad@comsys.ro> |
| Date: Thu Oct 25 16:08:14 2007 +0300 |
| |
| Trimmed some variables in ne2000.c |
| |
| Signed-off-by: Vlad Lungu <vlad@comsys.ro> |
| |
| commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0 |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Thu Oct 25 17:51:27 2007 +0800 |
| |
| Fix the issue of usb_kbd driver missing the scan code of key 'z'. |
| |
| The scan code of the key 'z' is 0x1d, which should be handled. |
| |
| The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI |
| controller. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit bbf4796f6498fbade56d56eff3a0a49b299d93e5 |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Thu Oct 25 17:30:04 2007 +0800 |
| |
| Fix USB support issue for MPC8641HPCN board. |
| |
| The configuration file has already enabled USB, but it |
| missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB |
| on MPC8641HPCN can not work because of the wrong USB |
| register endian. |
| |
| And add the USB command to U-Boot commands list. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit 4e62041023dc3de9d98d977bb080235bc6d035e0 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Wed Oct 24 18:16:01 2007 +0200 |
| |
| Use config_cmd_default.h instead of config_cmd_all.h |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 56622f87857439b1c221e9deef11a9d5bb5d4308 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Oct 24 01:37:36 2007 +0200 |
| |
| TQM5200: Call usb_cpu_init() during board init |
| |
| usb_cpu_init() configures GPS USB pins, clocks, etc. and |
| is required for proper operation of kernel USB subsystem. |
| This setup was previously done in the kernel by the fixup |
| code which is being removed, thus low level init must be |
| done by U-boot now. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Tue Oct 23 16:25:50 2007 +0200 |
| |
| Fix typo in nfs.c |
| |
| An obvious typo. Originally fixed in linkstation u-boot port. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78 |
| Author: Guennadi Liakhovetski <lg@denx.de> |
| Date: Tue Oct 23 14:35:05 2007 +0200 |
| |
| Fix a typo in cpu/mpc824x/interrupts.c |
| |
| Since December 2003 the timer_interrupt_cpu() function in |
| cpu/mpc824x/interrupts.c contains what seems to be a superfluous |
| parameter. Remove it. |
| |
| Signed-off-by: Guennadi Liakhovetski <lg@denx.de> |
| |
| commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d |
| Author: Sergej Stepanov <Sergej.Stepanov@ids.de> |
| Date: Wed Oct 17 11:13:51 2007 +0200 |
| |
| add ft_cpu_setup(..) on mpc8260 |
| |
| Add ft_cpu_setup(..)-function to adapt it for use with libfdt |
| based on code from mpc5xxx |
| |
| Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de> |
| -- |
| |
| commit 6abd82e19ae93c0b4d104e50165e235915ec0875 |
| Author: Sergej Stepanov <Sergej.Stepanov@ids.de> |
| Date: Wed Oct 17 11:18:42 2007 +0200 |
| |
| changes for IDS8247 board support |
| |
| To get the IDS8247 board working following are done: |
| - FCC2 is deactivated |
| - FCC1 is activated |
| - I2C is activated |
| - CFI driver is activated |
| - Adapted for use with LIBFDT |
| |
| Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de> |
| -- |
| |
| commit 3d6cb3b24add6415f86a0f013ea40f5639b90047 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Nov 3 12:08:28 2007 +0100 |
| |
| ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support |
| |
| This patch adds NAND booting support for the AMCC 405EX(r) eval boards. |
| Again, only one image supports both targets. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Wed Oct 24 15:48:37 2007 +0200 |
| |
| ATSTK1002: Remove default ethernet addresses |
| |
| Wolfgang is right: It's not a good idea to set up default initial |
| ethernet addresses for a board, even though they belong to the local |
| range. |
| |
| This will change the failure mode from "IT manager screams at you for |
| using duplicate ethernet addresses" to a nice error message explaining |
| that the ethernet address hasn't been set properly. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit e5c794e491a57d829b6d8733e2ed8368a2269abf |
| Author: Justin Flammia <jflammia@savantav.com> |
| Date: Mon Oct 29 17:40:35 2007 -0400 |
| |
| DHCP Client Fix |
| |
| This is a multi-part message in MIME format. |
| |
| commit e6e505eae94ed721e123e177489291fc4544b7b8 |
| Author: Justin Flammia <jflammia@savantav.com> |
| Date: Mon Oct 29 17:19:03 2007 -0400 |
| |
| Found a bug in the way the DHCP Request packet is built, where the IP address |
| that is offered by the server is bound to prematurely. This patch is a fix of |
| that bug where the IP address offered by the DHCP server is not used until |
| after the DHCP ACK from the server is received. |
| |
| Signed-off-by: Justin Flammia <jflammia@savantav.com> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 5d96d40d3f36da33348e68f9ea993f383e11f997 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 20:58:34 2007 +0100 |
| |
| ppc4xx: Fix acadia_nand build problem |
| |
| Since the cache handling functions were moved from start.S into cache.S |
| the acadia NAND booting Makfile needs to be adapted accordingly. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 20:57:11 2007 +0100 |
| |
| ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM |
| |
| This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files |
| and to the Sequoia TLB init code. Now the cache can be enabled on 44x |
| boards by defining CONFIG_4xx_DCACHE in the board config file. This |
| option will disappear, when more boards use is successfully and no |
| more known problems exist. |
| |
| This is tested successfully on Sequoia and Katmai. The only problem that |
| needs to be fixed is, that USB is not working on Sequoia right now, since |
| it will need some cache handling code too, similar to the 4xx EMAC driver. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 20:51:10 2007 +0100 |
| |
| ppc4xx: Enable CPU POST test for 4xx with dcache enabled |
| |
| Now with caches enabled (i- and d-cache) on 44x, we need a chance to |
| disable the cache for the CPU POST tests, since these tests consist |
| of self modifying code. This is done via the new change_tlb() function. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f71b2888b4b3c870909a0341427b2a914246f81f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 20:47:26 2007 +0100 |
| |
| ppc4xx: Change 4xx POST ethernet test to handle cached memory too |
| |
| This patch enables the 4xx EMAC POST driver to work too, when dcache is |
| enabled. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a2685904061b35a17583d65fe47cdc2686a69eaa |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 20:45:53 2007 +0100 |
| |
| ppc4xx: Remove temporary TLB entry in POST cache test only for 440 |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ff768cb168d8157c24a25016dbfbeb465e47f420 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 18:01:24 2007 +0100 |
| |
| ppc4xx: Change 4xx ethernet driver to handle cached memory too |
| |
| This patch enables the 4xx EMAC driver to work too, when dcache is |
| enabled. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 483e09a223c666269ef81d3573a6591b1046b0ef |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 17:59:22 2007 +0100 |
| |
| ppc4xx: Add change_tlb function to modify I attribute of TLB(s) |
| |
| This function is used to either turn cache on or off in a specific |
| memory area. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 17:57:52 2007 +0100 |
| |
| ppc4xx: Remove cache definition from 4xx board config files |
| |
| All 4xx board config files don't need the cache definitions anymore. |
| These are now defined in common headers. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9b94ac61d2176185c30adf0793e079ec30e68687 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 31 17:55:58 2007 +0100 |
| |
| ppc4xx: Rework 4xx cache support |
| |
| New cache handling functions added and all existing functions |
| moved from start.S into seperate cache.S. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 06713773da4ac3d390c63d82641eb553224b27c2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 23 18:03:12 2007 +0200 |
| |
| ppc4xx: Remove compiler warning from previous commit |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 23 14:40:30 2007 +0200 |
| |
| ppc4xx: Remove temporary TLB entry in POST cache test |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1338e6a81834099ba19733b69aafd8ef5f098094 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 23 14:05:08 2007 +0200 |
| |
| ppc4xx: Change autonegotiation timeout from 4 to 5 seconds |
| |
| I lately noticed, that newer 4xx board with GBit support sometimes don't |
| finish link autonegotiation in 4 seconds. Changing this timeout to 5 |
| seconds seems fine here. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 23 14:03:17 2007 +0200 |
| |
| ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends |
| |
| This patch changes all in32/out32 calls to use the recommended in_be32/ |
| out_be32 macros instead. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Oct 25 12:24:59 2007 +0200 |
| |
| ppc4xx: Fix POST ethernet test for Haleakala |
| |
| The POST ethernet test needed to be changed to dynamically determine |
| the count of ethernet devices. This code is cloned from the 4xx |
| ethernet driver. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 23 11:31:05 2007 +0200 |
| |
| ppc4xx: Correct UART input clock calculation and passing to fdt |
| |
| We now use a value in the gd (global data) structure for the UART input |
| frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely |
| in get_sys_info(). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 23 10:10:08 2007 +0200 |
| |
| ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support |
| |
| The Haleakala is nearly identical with the Kilauea eval board. The only |
| difference is that the 405EXr only supports one EMAC and one PCIe |
| interface. This patch adds support for the Haleakala board by using |
| the identical image for Kilauea and Haleakala. The distinction is done |
| by comparing the PVR. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9f798766aa85e62eb8fa8c721e148df609b78137 |
| Author: Eugene O'Brien <eugene.obrien@advantechamt.com> |
| Date: Tue Oct 23 08:29:10 2007 +0200 |
| |
| ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM |
| |
| This patch also adds a note to the fixed DDR setup for Bamboo NAND booting: |
| |
| Note: |
| As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed |
| DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM |
| modules are still plugged in. So it is recommended to remove the DIMM |
| modules while using the NAND booting code with the fixed SDRAM setup! |
| |
| Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 22 16:24:44 2007 +0200 |
| |
| ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3248f63ad89cb031491edb7016587fe6e9a238b9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 22 16:22:40 2007 +0200 |
| |
| ppc4xx: Rework of 4xx serial driver (4) |
| |
| Change 4xx_uart.c: |
| |
| - Use in_8/out_8 macros instead of in8/out8 |
| - No need for UART_BASE marco anymore, now really handled via function |
| parameter |
| - serial_init_common() introduced |
| - Further coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e61cb8163a66b8a135696ae232e2bead1ce0a049 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 22 15:45:49 2007 +0200 |
| |
| ppc4xx: Rework of 4xx serial driver (3) |
| |
| Change all linker scripts to reference the changed driver name iop480_uart.o. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 882ae41274921f9016131806bdeb27e19606f47a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 22 15:44:39 2007 +0200 |
| |
| ppc4xx: Rework of 4xx serial driver (2) |
| |
| Change all linker scripts to reference the changed driver name 4xx_uart.o. |
| |
| Note: In most cased all these explicit referencing of these object files |
| in the linker scripts is not neccessary. Only for manually embedded |
| environment into the U-Boot image, which is not done is most cases. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ad31e40bed042cb670d0036fea96435007afb838 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 22 15:09:59 2007 +0200 |
| |
| ppc4xx: Rework of 4xx serial driver (1) |
| |
| This patch starts the rework of the PPC4xx serial driver. First we split |
| the file into two seperate files, one 4xx_uart.c with the 405/440 UART |
| handling code and the other one iop480_uart.c with the UART code for the |
| PLX-Tech IOP480 PPC (PPC403 based). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 764e7417ee5f6e25b1715720e7d7dd3487109385 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 22 10:30:38 2007 +0200 |
| |
| ppc4xx: Correct UART input clock calculation and passing to fdt |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 22 07:34:34 2007 +0200 |
| |
| ppc4xx: Add initial AMCC Makalu 405EX support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit fa8aea20456e6f1dba43f46bcc72024dd9499998 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 22 07:33:52 2007 +0200 |
| |
| ppc4xx: Add freqUART to CPU speed detection |
| |
| This value is needed later for the device tree configuration of |
| the uart clock. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sun Oct 21 14:26:29 2007 +0200 |
| |
| ppc: Small Kilauea cleanup of config file |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 758c037aeead34b49631b8da3a90b1bba14c0410 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sun Oct 21 08:16:12 2007 +0200 |
| |
| rtc: Add Xicor/Intersil X1205 RTC support |
| |
| This patch adds support for the Xicor/Intersil X1205 RTC used on the |
| AMCC Makalu eval board. This driver is basically cloned from the Linux |
| driver version (2.6.23). |
| |
| This patch also introduces the Linux bcd.h header for the BCD2BIN/ |
| BIN2BCD conversions. In the future some of the other U-Boot RTC driver |
| should be converted to also use this header instead of implementing |
| their own local copy of these functions/macros. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sun Oct 21 08:12:41 2007 +0200 |
| |
| ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx |
| |
| This patch moves some common 4xx macros and the PPC405_SYS_INFO/ |
| PPC440_SYS_INFO structure into the common ppc4xx.h header. |
| |
| Lot's of other macros are good candidates to be consolidated this way |
| in the future. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 770c7af5800f598d22730d1f4b70f16c9b33512e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sun Oct 21 08:05:18 2007 +0200 |
| |
| ppc4xx: Fix size setup in Kilauea DDR2 init routine |
| |
| The size was initilized wrong. Instead of 256MB, the DDR2 controller |
| was setup to 512MB. Now the correct values is used. |
| |
| This patch also does a little cleanup and adds a comment here. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a |
| Author: Eugene O'Brien <eugene.obrien@advantechamt.com> |
| Date: Thu Oct 18 17:29:04 2007 +0200 |
| |
| ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors |
| |
| CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR |
| number is used to access system registers. |
| |
| Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c36c68160333ac5fe41ec3db12a728b7075b3912 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Oct 18 07:42:27 2007 +0200 |
| |
| ppc4xx: Change inbound PCIe location for endpoint tests on Katmai |
| |
| On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which |
| is the internal SRAM. Since I now ported and tested this endpoint mode |
| on Kilauea successfully to map to 0 (SDRAM), I also changed this for |
| Katmai. |
| |
| Yucca will stay at internal SRAM for now. Not sure if somebody relies on |
| this setup. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5cb4af4791f61843432155142b6cfac901f66c10 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Oct 18 07:39:38 2007 +0200 |
| |
| ppc4xx: Add PCIe endpoint support on Kilauea (405EX) |
| |
| This patch adds endpoint support for the AMCC Kilauea eval board. It can |
| be tested by connecting a reworked PCIe cable (only 1x lane singles |
| connected) to another root-complex. |
| |
| In this test setup, a 64MB inbound window is configured at BAR0 which maps |
| to 0 on the PLB side. So accessing this BAR0 from the root-complex will |
| access the first 64MB of the SDRAM on the PPC side. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d4cb2d17946466740afeb195a57d6cb290bf4cc0 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 13 16:43:23 2007 +0200 |
| |
| ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode |
| |
| This patch adds support for dynamic configuration of PCIe ports for the |
| AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe |
| boards Yucca & Katmai and the 405EX board Kilauea. |
| |
| This dynamic configuration is done via the "pcie_mode" environement |
| variable. This variable can be set to "EP" or "RP" for endpoint or |
| rootpoint mode. Multiple values can be joined via the ":" delimiter. |
| Here an example: |
| |
| pcie_mode=RP:EP:EP |
| |
| This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2 |
| as endpoint. |
| |
| Per default Yucca will be configured as: |
| pcie_mode=RP:EP:EP |
| |
| Per default Katmai will be configured as: |
| pcie_mode=RP:RP:REP |
| |
| Per default Kilauea will be configured as: |
| pcie_mode=RP:RP |
| |
| Signed-off-by: Tirumala R Marri <tmarri@amcc.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Oct 11 11:15:59 2007 +0200 |
| |
| ppc4xx: Enable device tree support (fdt) on Kilauea per default |
| |
| This patch enables the fdt support on the AMCC Kilauea eval board. |
| Additionally now EBC ranges fdt fixup is included to support NOR |
| FLASH mapping via the Linux physmap_of driver. |
| |
| This Kilauea port now support booting arch/ppc and arch/powerpc |
| Linux kernels. The default environment "net_nfs" is for arch/ppc |
| and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc |
| support will be removed. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Oct 11 11:11:45 2007 +0200 |
| |
| ppc4xx: Add additional debug info to 4xx fdt support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit db3232ddb058d0ed0bc31f7c5c296748a1afac67 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 21:28:58 2007 +0200 |
| |
| ppc4xx: Fix small merge problems with CPCI440 and Acadia boards |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1941cce71b1ae975602854045061e82f94ecd012 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 17:35:10 2007 +0200 |
| |
| ppc4xx: Fix small merge problem in 4xx_enet.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 17:11:30 2007 +0200 |
| |
| ppc4xx: Add initial AMCC Kilauea 405EX support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit dbbd125721aea6645fdb962f36bd41f59e272f9d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 17:10:59 2007 +0200 |
| |
| ppc4xx: Add PPC405EX support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 17:09:36 2007 +0200 |
| |
| ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 17:07:50 2007 +0200 |
| |
| ppc4xx: Add initial fdt support to 4xx (first needed on 405EX) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a424a8bb2924b90724b944165d3141f1fa8dfe5b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 17:04:57 2007 +0200 |
| |
| POST: Add 405EX support to 4xx UART POST test |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 15:10:02 2007 +0200 |
| |
| DTT: Prepare DS1775 driver for use of different I2C addresses |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 19e93b1e16d267220440d827b920fbad8abfa70f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 14:23:43 2007 +0200 |
| |
| ppc4xx: 4xx_pcie: Change PCIe status output to match common style |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ff68f66bcb0da847845aa2fac11eba6c25938c99 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 09:22:33 2007 +0200 |
| |
| ppc4xx: 4xx_pcie: Disable debug output as default |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 97923770cb52b64d69eec958a11b2eda8d46e0f7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 09:18:23 2007 +0200 |
| |
| ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4dbee8a90df613eb517aadbecebd70f168913d30 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Oct 5 07:57:20 2007 +0200 |
| |
| ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai |
| |
| 128MB seems to be the smallest possible value for the memory size |
| for on PCIe port. With this change now the BAR's of the PCIe cards |
| are accessible under U-Boot. |
| |
| One big note: This only works for PCIe port 0 & 1. For port 2 this |
| currently doesn't work, since the base address is now 0xc0000000 |
| (0xb0000000 + 2 * 0x08000000), and this is already occupied by |
| CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean |
| to change the base addresses completely and this change would have |
| too much impact right now. |
| |
| This patch adds debug output to the 4xx pcie driver too. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 3 21:16:32 2007 +0200 |
| |
| ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 3 15:01:02 2007 +0200 |
| |
| ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms |
| |
| These files were introduced with the IBM 405GP but are currently used on all |
| 4xx PPC platforms. So the name doesn't match the content anymore. This patch |
| renames the files to 4xx_pci.c/h. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 94276eb0a7a35b9e8c053d589ae225b0f017a237 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 3 14:14:58 2007 +0200 |
| |
| ppc4xx: Add a comment for 405EX PCIe endpoint configuration |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 3 10:38:09 2007 +0200 |
| |
| ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3) |
| |
| (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access |
| the SDR registers of the PCIe ports. This makes the overall design |
| clearer, since it removed a lot of switch statements which are not |
| needed anymore. |
| |
| Also, the functions ppc4xx_init_pcie_rootport() and |
| ppc4xx_init_pcie_entport() are merged into a single function |
| ppc4xx_init_pcie_port(), since most of the code was duplicated. |
| This makes maintainance and porting to other 4xx platforms |
| easier. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 026f71106871f31d17d0ea0db9a7547ff92934bc |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 3 07:48:09 2007 +0200 |
| |
| ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2) |
| |
| This patch is the first patch of a series to make the 440SPe PCIe code |
| usable on different 4xx PPC platforms. In preperation for the new 405EX |
| which is also equipped with PCIe interfaces. |
| |
| (2) This patch renames the functions from 440spe_ to 4xx_ with a |
| little additional cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c7c6da23028f146d912514b95aefa3da7cf37699 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 3 07:34:10 2007 +0200 |
| |
| ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1) |
| |
| This patch is the first patch of a series to make the 440SPe PCIe code |
| usable on different 4xx PPC platforms. In preperation for the new 405EX |
| which is also equipped with PCIe interfaces. |
| |
| (1) This patch renames the files from 440spe_pcie to 4xx_pcie |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 245a362ad3c0c1b84fccc9fec7b623eb14f6e502 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Oct 24 01:37:36 2007 +0200 |
| |
| TQM5200: Call usb_cpu_init() during board init |
| |
| usb_cpu_init() configures GPS USB pins, clocks, etc. and |
| is required for proper operation of kernel USB subsystem. |
| This setup was previously done in the kernel by the fixup |
| code which is being removed, thus low level init must be |
| done by U-boot now. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit b5af773f8d92677e06f3295b45557c9d0a487c24 |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Thu Oct 25 17:51:27 2007 +0800 |
| |
| Fix the issue of usb_kbd driver missing the scan code of key 'z'. |
| |
| The scan code of the key 'z' is 0x1d, which should be handled. |
| |
| The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI |
| controller. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 85ac988e86f9414fa645b0148dc66c3520a1eb84 |
| Author: Rodolfo Giometti <giometti@enneenne.com> |
| Date: Mon Oct 15 11:59:17 2007 +0200 |
| |
| PXA USB OHCI: "usb stop" implementation. |
| |
| Some USB keys need to be switched off before loading the kernel |
| otherwise they can remain in an undefined status which prevents them |
| to be correctly recognized by the kernel. |
| |
| Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 31548249decf18a6b877a18436b6139dd483fe4a |
| Author: Justin Flammia <jflammia@savantav.com> |
| Date: Mon Oct 29 17:40:35 2007 -0400 |
| |
| DHCP Client Fix |
| |
| This is a multi-part message in MIME format. |
| |
| commit e6e505eae94ed721e123e177489291fc4544b7b8 |
| Author: Justin Flammia <jflammia@savantav.com> |
| Date: Mon Oct 29 17:19:03 2007 -0400 |
| |
| Found a bug in the way the DHCP Request packet is built, where the IP address |
| that is offered by the server is bound to prematurely. This patch is a fix of |
| that bug where the IP address offered by the DHCP server is not used until |
| after the DHCP ACK from the server is received. |
| |
| Signed-off-by: Justin Flammia <jflammia@savantav.com> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Oct 25 17:16:22 2007 -0500 |
| |
| ColdFire 54455: Fix correct boot location for atmel and intel |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Oct 25 17:14:00 2007 -0500 |
| |
| ColdFire: Fix build error when CONFIG_WATCHDOG is defined |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit c67e12e705b204cfe914e3e3e693d69a445dcabf |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Oct 25 17:12:36 2007 -0500 |
| |
| ColdFire 5329: Assign correct SDRAM size and fix cache |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Oct 25 17:10:23 2007 -0500 |
| |
| ColdFire 5253: Assign correct SDRAM size |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 2acefa72ee0026f862ab65597ca687428f63a973 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Oct 25 17:09:17 2007 -0500 |
| |
| ColdFire 5282: Fix external flash boot and return dramsize |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Oct 25 17:20:01 2007 +0200 |
| |
| TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk). |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Wed Oct 24 08:42:25 2007 +0200 |
| |
| TQM5200: fix spurious characters on second serial interface |
| |
| With this patch PSC3 is configured as UART. This is done, because if |
| the pins of PSC3 are not configured at all (-> all pins are GPI), |
| due to crosstalk, spurious characters may be send over the RX232_2_TXD |
| signal line. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit be4a87f11e297a5cededbf7dd71c0248f3874acd |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Wed Oct 24 08:41:27 2007 +0200 |
| |
| TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller |
| |
| Some commands for the STK52xx base board try to access the SM501 grafic |
| controller. But the TQM5200S has no grafic controller (only the TQM5200 |
| and the TQM5200B have). This patch deactivates the commands accessing |
| the SM501 for the TQM5200S. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit b31f64343ead9482cd439b1adbe4c34026a641b1 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Mon Oct 22 16:45:53 2007 +0200 |
| |
| TQM5200: fix spurious characters on second serial interface |
| |
| With this patch PSC3 is configured as UART. This is done, because if |
| the pins of PSC3 are not configured at all (-> all pins are GPI), |
| due to crosstalk, spurious characters may be send over the RX232_2_TXD |
| signal line. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Mon Oct 22 16:40:06 2007 +0200 |
| |
| TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller |
| |
| Some commands for the STK52xx base board try to access the SM501 grafic |
| controller. But the TQM5200S has no grafic controller (only the TQM5200 |
| and the TQM5200B have). This patch deactivates the commands accessing |
| the SM501 for the TQM5200S. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sun Oct 21 09:14:28 2007 +0200 |
| |
| Mips: Fix string functions differ prototype declaration |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Oct 19 17:51:40 2007 -0500 |
| |
| fsl_pci_init enable COMMAND_MEMORY if inbound window |
| |
| Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows |
| to pciauto_setup_device has the side effect of not getting |
| COMMAND_MEMORY set. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit e9d0d527992566ebef9826962ff1745b2f082b92 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Oct 19 10:55:24 2007 +0200 |
| |
| delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 9c4884f54da982ce990c7d1760ac81b0704d3c64 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Oct 19 08:10:15 2007 +0200 |
| |
| fix warning: no return statement in function returning non-void |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit e78220f6e514206757acfe247297fc9a328a881f |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Oct 19 06:33:45 2007 +0200 |
| |
| xsengine: Fix no partition type specified, use DOS as default |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 10cdb8dbd67a818823ab9ec88b68fc348903db59 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Oct 19 00:24:59 2007 +0200 |
| |
| lubbock: Fix no partition type specified, use DOS as default |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Oct 23 16:50:03 2007 +0200 |
| |
| Coding style: keep lists sorted; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 58b74b05c621e2835ecf4e2d3243042cf4186777 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Oct 19 00:09:05 2007 +0200 |
| |
| Fix missing drivers makefile entries ds1722.c mw_eeprom.c |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 96455bfebc9887837095c9051d216f53c61b5f10 |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Fri Oct 19 00:07:39 2007 +0200 |
| |
| Fix warning differ in signedness in board/innokom/innokom.c |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd |
| Author: Marcel Ziswiler <marcel@ziswiler.com> |
| Date: Fri Oct 19 00:25:33 2007 +0200 |
| |
| fix pxa255_idp board |
| |
| The pxa255_idp being an old unmaintained board showed several issues: |
| 1. CONFIG_INIT_CRITICAL was still defined. |
| 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined. |
| 3. Symbol flash_addr was undeclared. |
| 4. The boards lowlevel_init function was still called memsetup. |
| 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000. |
| 6. Using -march=armv5 instead of -march=armv5te resulted in lots of |
| 'target CPU does not support interworking' warnings on recent compilers. |
| 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as |
| indexes rather than the register definitions from the pxa-regs header |
| file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to |
| avoid any ambiguities. |
| 8. There were several redefinition warnings concerning ICMR, OSMR3, |
| OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file. |
| 9. The board configuration file was rather outdated. |
| 10. The part header file defined the vendor, product and revision arrays |
| as unsigned chars instead of just chars in the block_dev_desc_t |
| structure. |
| |
| Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> |
| |
| commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6 |
| Author: Rune Torgersen <runet@innovsys.com> |
| Date: Wed Oct 17 11:56:31 2007 -0500 |
| |
| Make MPC8266ADS command selection more robust |
| |
| Fix MPC8266 command line definition so it won't break when new commands |
| are added to u-boot. |
| Signed-off-by Rune Torgersen <runet@innovsys.com> |
| |
| commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Oct 23 13:14:10 2007 +0200 |
| |
| Motion-PRO: Update configuration to accomodate next generation board. |
| |
| New board has faster oscillator and a different Flash chip. This affects: |
| - CFG_MPC5XXX_CLKIN |
| - SDRAM timings |
| - Flash CS configuration (timings) |
| - Flash sector size, and thus MTD partition layout |
| - malloc() arena size (due to bigger Flash sectors) |
| - smaller memory test range (due to bigger malloc() arena) |
| |
| This patch also enables more extensive memory testing via "mtest". |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit eff501904df2bf1724a750062628ba2c51dbb1f8 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Oct 23 11:36:07 2007 +0200 |
| |
| Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration. |
| |
| Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay |
| register must be written a value of 0x00000004 as the first step of the |
| SDRAM contorller configuration. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Oct 23 10:22:16 2007 +0100 |
| |
| Move PL01* serial drivers to drivers/serial and adjust Makefiles. |
| |
| commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 23 10:17:42 2007 +0200 |
| |
| ppc4xx: lwmon5: Some further GPIO config changes |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d |
| Author: Vlad Lungu <vlad@comsys.ro> |
| Date: Sun Oct 21 22:10:10 2007 +0900 |
| |
| [MIPS] Fix UNCACHED_SDRAM |
| |
| PHYSADDR is for physical address, KSEG1ADDR is for uncached. |
| |
| Signed-off-by: Vlad Lungu <vlad@comsys.ro> |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit 00101dd7a32d12f698150123e47e4b3420279f86 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Sun Oct 21 21:30:42 2007 +0900 |
| |
| [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit eb700636db017d310edaeb559b13d82588560674 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Sun Oct 21 10:55:37 2007 +0900 |
| |
| [MIPS] u-boot.lds: Define _gp in a standard manner |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Sun Oct 21 10:55:36 2007 +0900 |
| |
| [MIPS] Fix $gp usage |
| |
| Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use. |
| As a general principle, we should use _gp for $gp. |
| |
| Thanks to linker script's help we fortunately have _gp which equals to |
| _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not |
| be able to access to GOT entires, global variables and procedure entry |
| points. The right thing to do is to use _gp. |
| |
| This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_' |
| which holds the offset from _gp. When updating GOT entries, we use this |
| offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_. |
| |
| This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then |
| I made some change to leave over num_got_entries. |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Cc: Vlad Lungu <vlad@comsys.ro> |
| |
| commit cbf2323b5b8285ea01acba7bbb905a3162d9b021 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Sun Oct 21 10:55:36 2007 +0900 |
| |
| [MIPS] u-boot.lds: Fix __got_start and __got_end |
| |
| Ensure that __got_start points to top of the `.got', and __got_end points |
| to bottom as well, so that we never fail to count num_got_entries. |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Sun Oct 21 10:55:36 2007 +0900 |
| |
| [MIPS] u-boot.lds: Remove duplicated .sdata section |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Oct 21 01:01:17 2007 +0200 |
| |
| Minor coding style cleanup; update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c |
| Author: Vlad Lungu <vlad@comsys.ro> |
| Date: Thu Oct 4 20:47:10 2007 +0300 |
| |
| Fix NE2000 driver: |
| |
| Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try |
| to do anything in eth_stop() if eth_init() was not called. |
| Simplified RX path in order to avoid timeouts on really really |
| fast NE2000 cards (read: qemu with internal tftp), NetLoop() is |
| clever enough to cope with 1 packet per eth_rx(). |
| |
| Signed-off-by: Vlad Lungu <vlad@comsys.ro> |
| |
| commit df90968b48fb34fa9072fab150db2ac89678f537 |
| Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com> |
| Date: Mon Sep 24 13:32:13 2007 -0400 |
| |
| Setting MSR[DE] in do_reset |
| |
| Hello, |
| This patch ensures the soft reset of the board for the 85xx boards |
| by setting the MSR[DE] in the do_reset function. |
| |
| Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com> |
| |
| commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d |
| Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com> |
| Date: Mon Sep 24 13:36:01 2007 -0400 |
| |
| MSR overwrite fix |
| |
| Hello, |
| This patch fixes the MSR overwrite in the start.S when moving out of |
| the last 4K page. |
| |
| Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com> |
| |
| commit 5c7ea64bb74a850a2b2303f853a8270695ad8602 |
| Author: Dan Wilson <dwilson@fulcrummicro.com> |
| Date: Fri Oct 19 11:33:48 2007 -0500 |
| |
| tsec driver should clear RHALT on startup |
| |
| This was causing problems for some people. |
| |
| Signed-off-by: Alain Gravel <agravel@fulcrummicro.com> |
| Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 7600d47b8f6a10019e537dc9a62aa1498df58d25 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Oct 11 00:29:18 2007 -0500 |
| |
| Improve handling of PCI interrupt device tree fixup on MPC85xx CDS |
| |
| On the MPC85xx CDS we have two issues: |
| |
| 1. The device tree fixup code did not check to see if the property we are |
| trying to update is actually found. Its possible that it would update |
| random memory starting at 0. |
| |
| 2. Newer Linux kernel's have moved the location of the PCI nodes to be |
| sibilings of the soc node and not children. The explicit PATH to the PCI |
| node would not be found for these device trees. Add the ability to handle |
| both paths. In the future we shouldn't handle such fixups by explicit path. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit a3063eec775719b7e91023bbec3f64b3118791df |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Oct 11 00:18:48 2007 -0500 |
| |
| Set OF_STDOUT_PATH to match the default console on MPC8568 MDS |
| |
| On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured |
| console. Make it so we match that config what we tell Linux as the early |
| STDOUT console. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit e1ce3cb617bb06f91f82f98915391175addf3e82 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Oct 2 11:12:27 2007 -0500 |
| |
| Remove magic numbers from cache related operations for mpc85xx |
| |
| The mpc85xx start code uses some magic numbers that we actually |
| have #defines for in <config.h> so use those instead. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 5441f61a3d8b7034f19fc1361183e936198e6dbb |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Fri Oct 19 16:47:26 2007 +0200 |
| |
| Fix two typos. |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit 281df457c1aa50d2752165d0c5c3282d4027b974 |
| Author: Tony Li <tony.li@freescale.com> |
| Date: Thu Oct 18 17:47:19 2007 +0800 |
| |
| mpc83xx: Add configure entry for MPC83xx ATM support |
| |
| Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into |
| Makfile and MAKEALL |
| |
| Signed-off-by: Tony Li <tony.li@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit d2646554f529a9577515eceb0ec5eceee18244ba |
| Author: Tony Li <tony.li@freescale.com> |
| Date: Thu Oct 18 17:44:38 2007 +0800 |
| |
| mpc83xx: pq-mds-pib.c typo error |
| |
| Correct to val8 from val. |
| |
| Signed-off-by: Tony Li <tony.li@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 3e11ae80fec1ee12194940955431186abf6009c2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Oct 17 15:40:19 2007 +0200 |
| |
| ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 16 15:27:43 2007 -0500 |
| |
| Initial mpc8610hpcd Makefile files. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com> |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 16 15:26:51 2007 -0500 |
| |
| Initial mpc8610hpcd cpu/, README and include/ files. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com> |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 16 13:54:01 2007 -0500 |
| |
| Initial mpc8610hpcd board files. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com> |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd |
| Author: runet@innovsys.com <runet@innovsys.com> |
| Date: Tue Oct 16 14:50:40 2007 -0500 |
| |
| Make MPC8266ADS board compile again. |
| |
| Signed-off-by: Runet Torgersen <runet@innovsys.com> |
| |
| commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Aug 27 12:41:03 2007 -0500 |
| |
| 86xx: Allow for fewer DDR slots per memory controller. |
| |
| As a direct correlation exists between DDR DIMM slots |
| and SPD EEPROM addresses used to configure them, use |
| the individually defined SPD_EEPROM_ADDRESS* values to |
| determine if a DDR DIMM slot should have its SPD |
| configuration read or not. |
| |
| Effectively, this now allows for 1 or 2 DIMM slots |
| per memory controller. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4d4a945e189a2f384c66432316da2788a0ac1607 |
| Author: Rodolfo Giometti <giometti@enneenne.com> |
| Date: Mon Oct 15 11:59:17 2007 +0200 |
| |
| PXA USB OHCI: "usb stop" implementation. |
| |
| Some USB keys need to be switched off before loading the kernel |
| otherwise they can remain in an undefined status which prevents them |
| to be correctly recognized by the kernel. |
| |
| Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| |
| commit e2e93442e558cf1500e92861f99713b2f045ea22 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 15 11:39:00 2007 +0200 |
| |
| ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier |
| |
| The I2C bootstrap values that can be setup via the "bootstrap" command, |
| were setup incorrect regarding the generation of the internal sync PCI |
| clock. The values for PLB clock == 133MHz were slighly incorrect and the |
| values for PLB clock == 166MHz were totally incorrect. This could |
| lead to a hangup upon booting while PCI configuration scan. |
| |
| This patch fixes this issue and configures valid PCI divisor values |
| for the sync PCI clock, with respect to the provided external async |
| PCI frequency. |
| |
| Here the values of the formula in the chapter 14.2 "PCI clocking" |
| from the 440EPx users manual: |
| |
| AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz |
| |
| 33MHz async PCI frequency: |
| PLB = 133: |
| => 32 <= 44.3 <= 65 (div = 3) |
| |
| PLB = 166: |
| => 32 <= 55.3 <= 65 (div = 3) |
| |
| 66MHz async PCI frequency: |
| PLB = 133: |
| => 65 <= 66.5 <= 132 (div = 2) |
| |
| PLB = 166: |
| => 65 <= 83 <= 132 (div = 2) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Oct 15 11:29:33 2007 +0200 |
| |
| ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite |
| |
| The BCSR status bit for the 66MHz PCI operation was correctly |
| addressed (MSB/LSB problem). Now the correct currently setup |
| PCI frequency is displayed upon bootup. |
| |
| This patch also fixes this problem on Rainier & Yellowstone, since these |
| boards use the same souce code as Sequoia & Yosemite do. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit da3aad55cbde80ab6e301aafa82a2c411aa53eff |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Wed Sep 26 17:55:56 2007 +0200 |
| |
| TQM860M: adjust for doubled flash sector size. |
| |
| Adjust flash map to support the new S29GLxxN (N-Type) Flashes with |
| doubled sector size. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d |
| Author: Jens Gehrlein <jens.gehrlein@tqs.de> |
| Date: Wed Sep 26 17:55:54 2007 +0200 |
| |
| TQM8xx: Fix CAN timing. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit d43e489baf02afae49077791fb22332d240d8656 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Thu Sep 27 14:54:36 2007 +0200 |
| |
| TQM866M: fix SDRAM refresh |
| |
| At 133 MHz the current SDRAM refresh rate is too fast |
| (measured 4 * 1.17 us). |
| CFG_MAMR_PTA changes from 39 to 97. This result |
| in a refresh rate of 4 * 7.8 us at the default clock |
| 50 MHz. At 133 MHz the value will be then 4 * 2.9 us. |
| This is a compromise until a new method is found to |
| adjust the refresh rate. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 9ef57bbee1c67cc01da2026c242c4692db32be36 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Wed Sep 26 17:55:55 2007 +0200 |
| |
| TQM866M: adjust for doubled flash sector size. |
| |
| Adjust flash map to support the new S29GLxxN (N-Type) Flashes with |
| doubled sector size. |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Oct 14 16:12:29 2007 +0200 |
| |
| [FIX] XUPV2P change command handling |
| and remove code violation |
| |
| commit 636400198228d96983c06657b17f760f5989958e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Oct 14 00:13:19 2007 +0200 |
| |
| Prepare for 1.3.0-rc3 release |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 68f14f77ca5fe5f9cc025c8cae101671f628309f |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Sat Sep 29 13:41:37 2007 +0200 |
| |
| Fix warning differ in signedness in cpu/pxa/mmc.c |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit fc19e36f741e8bc727c0a330170b3b5db90399ef |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Oct 13 23:51:14 2007 +0200 |
| |
| Fix warning differ in signedness in board/mpl/vcma9/vcma9.c |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Oct 13 21:15:39 2007 +0200 |
| |
| Coding Style cleanup. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e1893815b0999410d7a327589611c7b38e95299e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Oct 12 15:49:39 2007 +0200 |
| |
| GP3 SSA: enable RTC |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 8002012041f1ff9f997a5727abe5015f70cd2e46 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Tue Oct 9 13:58:24 2007 +0200 |
| |
| [ads5121] EEPROM support added. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit 7b624ad254b97e5a25dca2304a398b64aeedaffe |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sat Oct 6 18:55:35 2007 +0200 |
| |
| AVR32: Initialize bi_flash* in board_init_r |
| |
| The ATSTK1000-specific flash driver intializes bi_flashstart, |
| bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI |
| driver, don't. |
| |
| Initialize these in board_init_r instead so that things will still be |
| set up correctly when we switch to the CFI driver. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Fri Oct 5 10:40:54 2007 +0200 |
| |
| tqm5200: Fix CONFIG_CMD_PCI typo in board config file. |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit 92869195ef8210758d2176230c0a36897afd50ed |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Oct 5 09:46:06 2007 +0200 |
| |
| CM5200: Fix missing null-termination in hostname manipulation code |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Tue Oct 2 19:09:01 2007 +0200 |
| |
| Fix memtest breakage |
| |
| CFG_MEMTEST_START uses weird magic involving gd, which fails to |
| compile. Use hardcoded values instead (we actually know how much RAM |
| we have on board.) |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 738815c0cc44aa329097f868dc1efc49ede9c5ba |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 2 11:44:46 2007 +0200 |
| |
| ppc4xx: Coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 87c1833a39e944db66385286fd5e28f9b3fcdd50 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 2 11:44:19 2007 +0200 |
| |
| ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Mon Oct 1 09:51:50 2007 +0200 |
| |
| Program EPLD to force full duplex mode for PHY. |
| |
| EPLD forces modes of PHY operation. By default full duplex is turned off. |
| This fix turns it on. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818 |
| Author: Timo Ketola <timo.ketola@exertus.fi> |
| Date: Mon Sep 24 14:50:32 2007 +0300 |
| |
| Bugfix: Use only one PTD for one endpoint |
| |
| Original isp116x-hcd code prepared multiple PTDs for longer than 16 |
| byte transfers for one endpoint. That is unnecessary because the |
| ISP116x is able to split long data from one PTD into multiple |
| transactions based on the buffer size of the endpoint. It also caused |
| serious problems if the endpoint NAKed some of the transactions. In |
| that case ISP116x wouldn't notice that the other PTDs were for the same |
| endpoint and would try the other PTDs possibly out of order. That would |
| break the whole transfer. |
| |
| This patch makes isp116x_submit_job to use one PTD for one transfer. |
| |
| Signed-off-by: Timo Ketola <timo.ketola@exertus.fi> |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 86ec86c04326c3913178a7679aa910de071da75d |
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| Date: Thu Sep 27 23:27:47 2007 +0200 |
| |
| Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial |
| |
| Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| |
| commit 3e954beb614b5b190d7f4f4c3b641437a0132e35 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Sep 11 14:12:55 2007 +0200 |
| |
| ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Sep 26 16:35:54 2007 -0500 |
| |
| 85xx io out functions need sync after write. |
| |
| This fixes the mc146818 rtc_read/write functions for 85xx. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Sep 25 15:48:05 2007 -0600 |
| |
| Fpga: fix incorrect test of CFG_FPGA_XILINX macro |
| |
| CFG_FPGA_XILINX is a bit value used to test against the value in |
| CONFIG_FPGA. Testing for a value will always return TRUE. I don't |
| think that is the intention in this code. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:41:30 2007 +0200 |
| |
| [FIX] change command handling and removing code violation |
| |
| commit f240356507038e5ce55e8a24cb2607e9eae6d10c |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:36:06 2007 +0200 |
| |
| [FIX] change sets of commands |
| because changing of command handling brings |
| compilation problems |
| |
| commit cb1bc63b75a232571eb69aa2c8aa919321655845 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:30:42 2007 +0200 |
| |
| [FIX] Email reparation & Copyright |
| Both codes are written by myself without any |
| support from CTU |
| |
| commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:25:11 2007 +0200 |
| |
| [PATCH] Change macro name for UartLite |
| because PowerPC 405 can use UartLite as console |
| |
| commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:21:19 2007 +0200 |
| |
| [PATCH] Add support for design without interrupt controller |
| Polling timer |
| |
| commit 0731933ec8ec45d02ba89b52df673d526873cdde |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:19:48 2007 +0200 |
| |
| [FIX] resolve problem with cpu without barrel shifter |
| |
| commit db14d77995ce515b728b178b63f82babe60e3d56 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:18:46 2007 +0200 |
| |
| [FIX] repair email address |
| |
| commit 481d4328618804add1f818a6c96296121cd0528e |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:17:42 2007 +0200 |
| |
| [FIX] repair MFSL commands |
| |
| commit b90c045f035c3cc9b5d2edaed6048dfb74e40763 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Sep 24 00:08:37 2007 +0200 |
| |
| synchronizition with mainline |
| |
| commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Sep 23 02:42:38 2007 +0900 |
| |
| sh: Add support command of ide with sh |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit d91ea45d15cf8e0987456bd211ffbb650824b6f1 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Sep 23 02:38:42 2007 +0900 |
| |
| sh: Update Makefile |
| |
| Add support MS7722SE01 to Makefile. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Sep 23 02:31:13 2007 +0900 |
| |
| sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 047375bfa4c3052fa50a748da7ff89e9dad3b364 |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Sep 23 02:19:24 2007 +0900 |
| |
| sh: Update MS7750SE01 platform |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 516ad760db3553766267ada01b7d5d727faa4bbd |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Sep 23 02:17:08 2007 +0900 |
| |
| sh: Remove comment out code from include/asm-sh/cpu_sh4.h |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit b02bad128669e567fce87d8df823b06a0144b8db |
| Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| Date: Sun Sep 23 02:12:30 2007 +0900 |
| |
| sh: Update core code of SuperH. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 66dcad3a9a53e0766d90e0084123bd8529522fb0 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Sep 20 00:04:14 2007 +0200 |
| |
| v1.3.0-rc2 |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 135e19bc2773ebca487e9a8371f67e1ba202313a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Sep 18 21:36:35 2007 +0200 |
| |
| Avoid compiler warning. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 8a783a65851bc7421ab69f442261215e21b8891a |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Sep 18 12:24:57 2007 -0600 |
| |
| Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config |
| |
| /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded |
| nulls in a string differently. For example, the following statement: |
| echo "this is a string\0" > afile |
| Will produce the following with /bin/bash: |
| "this is a string\0" |
| But with /bin/dash, will produce: |
| "this is a string |
| |
| Bug fixed by moving the embedded null out of the makefile and into the |
| config header. Also renamed the macro to avoid usage colision with the same |
| macro used by other board ports. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Sep 18 17:40:27 2007 +0200 |
| |
| MCC200: fix build warning |
| |
| The MCC200 board config file includes version.h for some customer- |
| specific setting, which causes warnings with "make depend"; build |
| version.h before depend. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit bd86220f58b99d6896198c385fda132f0c980915 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Sep 18 13:07:54 2007 +0100 |
| |
| Move coloured led API to status_led.h |
| Improve indentation in drivers/at45.c |
| |
| commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7 |
| Author: Eirik Aanonsen <eaa@wprmedical.com> |
| Date: Tue Sep 18 08:47:20 2007 +0200 |
| |
| Update atstk1002 bootargs. |
| |
| Updates to atstk1002 U-Boot header file: |
| - Changed bootargs: |
| * Set the bootargs for at1002 to point to the SD-card partition instead |
| * ... of the boot flash. |
| * Removing the rootfstype since that argument are not needed. |
| |
| Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com> |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225 |
| Author: Eirik Aanonsen <eaa@wprmedical.com> |
| Date: Wed Sep 12 13:32:37 2007 +0200 |
| |
| Add some comments to clocks in atstk1002.h |
| |
| This patch applies some clarifying comments to how the different |
| clocks are setup according to atstk1002.h Some of the previous |
| comments where stating wrongful information. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 97213f32416ead885deafea86774e912ffd60ad0 |
| Author: David Saada <David.Saada@ecitele.com> |
| Date: Mon Sep 17 17:04:47 2007 +0200 |
| |
| Description: Add NEC's PCI OHCI module ID to the USB OHCI driver |
| |
| Signed-off-by: David Saada <david.saada@ecitele.com> |
| |
| commit 30363e98fa470fbecea5e8bc0f1443352754f303 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Sep 17 08:20:47 2007 +0200 |
| |
| Small whitespace cleanup of OneNAND patch |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1 |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Mon Sep 10 17:15:14 2007 +0900 |
| |
| OneNAND support (take #2) |
| |
| [PATCH 3/3] OneNAND support (take #2) |
| |
| OneNAND support at U-Boot |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit 17aa2800457df0c06b41516f46f126712c196219 |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Mon Sep 10 17:14:34 2007 +0900 |
| |
| OneNAND support (take #2) |
| |
| [PATCH 2/3] OneNAND support (take #2) |
| |
| OneNAND support at U-Boot |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit 916527f4809a7bcd811f1f1daf34af184e31dd8c |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Mon Sep 10 17:13:49 2007 +0900 |
| |
| OneNAND support (take #2) |
| |
| [PATCH 1/3] OneNAND support (take #2) |
| |
| OneNAND support at U-Boot |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Sep 16 20:51:57 2007 +0200 |
| |
| [FIX] remove files form repository |
| |
| commit 67c31036acaaaa992fc346cc89db0909a7e733c4 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Sep 16 17:10:04 2007 +0200 |
| |
| TQM8xx[LM]: Fix broken environment alignment. |
| |
| With recent toolchains, the environment sectors were no longer aligned to |
| sector boundaries. The reason was a combination of two bugs: |
| |
| 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined |
| for all TQM8xxL and TQM8xxM boards. But "include/common.h", where |
| this gets defined, is not included here (and cannot be included |
| without causing lots of problems). |
| |
| Added a new #define CFG_USE_PPCENV for all boards which really |
| want to put the environment is a ".ppcenv" section. |
| |
| 2) The linker scripts just include environment.o, silently assuming |
| that the objects in that file are really in the order in which |
| they are coded in the C file, i. e. "environment" first, then |
| "redundand_environment", and "env_size" last. However, current |
| toolchains (GCC-4.x) reorder the objects, causing the environment |
| data not to start on a flash sector boundary: |
| |
| Instead of: we got: |
| |
| 40008000 T environment 40008000 T env_size |
| 4000c000 T redundand_environment 40008004 T redundand_environment |
| 40010000 T env_size 4000c004 T environment |
| |
| Note: this patch fixes just the first part, and cures the alignment |
| problem by making sure that "env_size" gets placed correctly. However, |
| we still have a potential issue because primary and redundant |
| environment sectors are actually swapped, i. e. we have now: |
| |
| 40008000 T redundand_environment |
| 4000c000 T environment |
| 40010000 T env_size |
| |
| This shall be fixed in the next version. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit eb6da8050797c204c9d010548424186c7ce32fc1 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Sep 16 02:39:35 2007 +0200 |
| |
| TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit cd2d1602c54cc6957bdef3872272a4b264893960 |
| Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com> |
| Date: Mon Sep 10 14:54:56 2007 -0400 |
| |
| Typo fix in tsec.c |
| |
| Fixup for the break statement in wrong place. |
| |
| [Patch by urwithsughosh@gmail.com] |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Sep 11 17:04:00 2007 +0200 |
| |
| Fix do_div() usage in nand process output |
| |
| Fix usage of do_div() in nand erase|read|write process output. |
| |
| The last patch to nand_util.c introduced do_div() instead of libgcc's |
| implementation. But do_div() returns the quotient in its first |
| macro parameter and not as result. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit c750d2e6692a000a82f29de7bf24e3dc21239161 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Wed Sep 12 12:36:53 2007 +0200 |
| |
| NAND: Add CFG_NAND_QUIET option |
| |
| This config option sets the default for the progress information |
| output behavior that can also be configured through the 'quiet' |
| environment variable. |
| |
| The legacy NAND code does not print the current progress info |
| on the console. So this option is for backward compatibility for |
| units that are in the field and where setting the quiet variable |
| is not an option. With CFG_NAND_QUIET set to '1' the console |
| progress info is turned off. This can still be overwritten |
| through the environment variable. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit dcb88630290d2bcd803386dd4c2be73142994c4f |
| Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com> |
| Date: Thu Sep 13 16:06:05 2007 -0700 |
| |
| ColdFire: fix build error becasue of bad type of mii_init() |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 314d5b6ce52a4ed19dd295d1364e246c5e605017 |
| Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com> |
| Date: Thu Sep 13 16:04:05 2007 -0700 |
| |
| ColdFire: Fix build error caused by pixis.c |
| |
| Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS. |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit e21659e30660a1377c42af135a6114efe39801d9 |
| Author: Sam Sparks <SSparks@twacs.com> |
| Date: Fri Sep 14 11:14:42 2007 -0600 |
| |
| Update MPC8349ITX*_config to place config.tmp in right place. |
| |
| MPC834ITX*_config does not store config.tmp at the correct locatation, |
| causing MPC8349ITXGP to have the wrong TEXT_BASE. |
| |
| Signed-off-by: Sam Sparks <SSparks@twacs.com> |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 1218abf1b5817a39a82399b4b928b00750575bda |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Sep 15 20:48:41 2007 +0200 |
| |
| Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 66b3f24d665be678a9dbb125b1e84185400f63b5 |
| Author: Dirk Behme <dirk.behme@googlemail.com> |
| Date: Sat Sep 15 11:55:42 2007 +0200 |
| |
| Make DECLARE_GLOBAL_DATA_PTR global for DaVinci |
| |
| As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not |
| function local. |
| |
| Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| |
| [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805 |
| |
| commit 991b089d1ce5ad945725e3657a8f106dfa02a38e |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat Sep 15 00:03:35 2007 +0200 |
| |
| Synchronize with U-BOOT mainline |
| |
| commit d7fee32b7e61fe11c64e371cde79faa4768e8350 |
| Author: Sam Sparks <SSparks@twacs.com> |
| Date: Fri Sep 14 11:14:42 2007 -0600 |
| |
| Update MPC8349ITX*_config to place config.tmp in right place. |
| |
| MPC834ITX*_config does not store config.tmp at the correct locatation, |
| causing MPC8349ITXGP to have the wrong TEXT_BASE. |
| |
| Signed-off-by: Sam Sparks <SSparks@twacs.com> |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Sep 13 18:21:48 2007 +0200 |
| |
| cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9 |
| |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| |
| commit e1f601b572db5de9aa81a0b77c68a86994fe24c4 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Sep 13 16:33:59 2007 +0200 |
| |
| tqm5200: Restore customary env. variable boot commands for powerpc kernels |
| |
| - update default definitions of kernel_addr and fdt_addr env. variables |
| - make arch/powerpc booting the default scenario |
| - update MTD partition layout to match the above |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit f34024d4a328e6edd906456da98d2c537155c4f7 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Sep 12 00:48:57 2007 +0200 |
| |
| Fix memory corruption problem on STX GP3 SSA Board. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Sep 11 15:35:01 2007 +0100 |
| |
| Final tidy |
| |
| commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Tue Sep 11 15:42:11 2007 +0200 |
| |
| [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to |
| scan on second pci bus. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Tue Sep 11 12:57:52 2007 +0200 |
| |
| [ppc4xx] Individual handling of sdram.c for bamboo_nand build |
| |
| Bamboo has a file sdram.c which needs special treatment when building in |
| separate directory. It has to be linked to build directory otherwise it is |
| not seen. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit d45963854eff39d575124d859419bb4953ce2c87 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Tue Sep 11 00:37:04 2007 +0200 |
| |
| [FIX] Microblaze ML401 - repare FLASH handling |
| |
| commit 38c1ef728d19950414a8ab1ccfc53767848fa346 |
| Author: Sean MCGOOGAN <sean.mcgoogan@st.com> |
| Date: Mon Sep 10 16:55:59 2007 +0100 |
| |
| Allocate CPU Architecture Code for STMicroelectronics' ST200. |
| |
| Signed-off-by: Sean McGoogan <Sean.McGoogan@st.com> |
| --------------------------------------------------- |
| |
| commit 754bac48156f8958d8f6a53a51eda88ab5758929 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Sep 10 20:42:31 2007 +0200 |
| |
| Update version to match current state. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Mon Sep 10 17:39:08 2007 +0200 |
| |
| [MPC512x] Streamline frame handling in the FEC driver |
| |
| - convert frame size settings to be derived from a single base |
| - set frame size to the recommended default value |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2 |
| Author: Kyungmin Park <kmpark@infradead.org> |
| Date: Mon Sep 10 11:34:00 2007 +0900 |
| |
| Remove compiler warning: target CPU does not support interworking |
| |
| Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> |
| |
| commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Sep 9 21:21:33 2007 +0200 |
| |
| Fix compile error in spc1920 config. |
| |
| Signed-off-by: Markus Klotzbücher <mk@denx.de> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Fri Sep 7 09:25:07 2007 -0600 |
| |
| Bugfix: make bootm+libfdt compile on boards with no flash |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Fri Sep 7 18:35:37 2007 +0200 |
| |
| [PPC440SPe] PCIe environment settings for Katmai and Yucca |
| |
| - 'pciconfighost' is set by default in order to be able to scan bridges |
| behind the primary host/PCIe |
| |
| - 'pciscandelay' env variable is recognized to allow for user-controlled |
| delay before the PCIe bus enumeration; some peripheral devices require a |
| significant delay before they can be scanned (e.g. LSI8408E); without the |
| delay they are not detected |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit 7f1913938984ef6c6a46cb53e003719196d9c5de |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Fri Sep 7 18:20:23 2007 +0200 |
| |
| [PPC440SPe] Improve PCIe configuration space access |
| |
| - correct configuration space mapping |
| - correct bus numbering |
| - better access to config space |
| |
| Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the |
| first device on the first bus. We now allow to configure up to 16 buses; |
| also, scanning for devices behind the PCIe-PCIe bridge is supported, so |
| peripheral devices farther in hierarchy can be identified. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Fri Sep 7 17:46:18 2007 +0200 |
| |
| [PPC440SPe] Convert machine check exceptions handling |
| |
| Convert using fixup mechanism to suppressing MCK for the duration of config |
| read/write transaction: while fixups work fine with the case of a precise |
| exception, we identified a major drawback with this approach when there's |
| an imprecise case. In this scenario there is the following race condition: |
| the fixup is (by design) set to catch the instruction following the one |
| actually causing the exception; if an interrupt (e.g. decrementer) happens |
| between those two instructions, the ISR code is executed before the fixup |
| handler the machine check is no longer protected by the fixup handler as it |
| appears as within the ISR code. In consequence the fixup approach is being |
| phased out and replaced with explicit suppressing of MCK during a PCIe |
| config read/write cycle. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit ff7640c9ead8806b5d827f2b29f9cb2632add729 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Sep 7 17:43:36 2007 +0200 |
| |
| Fix typo in MAKEALL script. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Fri Sep 7 17:09:21 2007 +0200 |
| |
| [MPC512x] Proper handling of larger frames in the FEC driver |
| |
| When frame larger than local RX buffer is received, it is split and handled |
| by two buffer descriptors. Prior to this patch the FEC driver discarded |
| contents of a buffer descriptor without the 'LAST' bit set, so the first |
| part of the frame was lost in case of larger frames. This fix allows to |
| safely combine the two pieces into the whole frame. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| |
| commit 8d17979d0359492a822a0a409d26e3a3549b4cd4 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Fri Sep 7 17:05:36 2007 +0200 |
| |
| [MPC512x] Correct fixup relocation |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit a89cbbd27a60e6740772000fd0688ffba1c2576a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Sep 7 01:21:25 2007 +0200 |
| |
| Update CHANGELOG, minor coding style cleanup. |
| |
| commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3 |
| Author: stefano babic <sbabic@denx.de> |
| Date: Thu Aug 30 23:01:49 2007 +0200 |
| |
| PXA270: Added support for TrizepsIV board. |
| |
| This patch add support for the Trizeps IV module (520Mhz). |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| |
| commit 80172c6181c912fbb34ea3ba0c22b232b419b47f |
| Author: stefano babic <sbabic@denx.de> |
| Date: Thu Aug 30 22:57:04 2007 +0200 |
| |
| PXA270: Add support for multiple serial ports. |
| |
| This patch adds support for multiple serial ports to the PXA target. |
| FFUART, BTUART and STUART are supported. |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| |
| commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e |
| Author: stefano babic <sbabic@denx.de> |
| Date: Thu Aug 30 22:48:47 2007 +0200 |
| |
| PXA270: fix compile issue (invalid lvalue) |
| |
| Code is broken for PXA270 due to "invalid lvalue in assignment". |
| |
| This patch fix it in pxa-regs.h |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| |
| commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Thu Aug 30 18:19:05 2007 +0800 |
| |
| Add BUILD_DIR support for bios emulator. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit b4d8a55145442f136982634862341a3e02002bda |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Fri Aug 31 14:41:51 2007 +0900 |
| |
| [MIPS] Remove inline asm string functions |
| |
| Stop using inline string functions on MIPS as other ARCHs do so, |
| since the optimized inline asm versions are not small. |
| |
| This change is triggered by a following MIPS build error: |
| common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init': |
| common/exports.c:32: undefined reference to `strcmp' |
| make: *** [u-boot] Error 1 |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Fri Aug 31 14:41:45 2007 +0900 |
| |
| [MIPS] Update asm string header |
| |
| This patches contains several bugfixes and cleanups in the latest upstream: |
| |
| - Don't include linux/config.h |
| - Remove buggy inline version of memscan. |
| - Merge with Linux 2.6.11-rc3. |
| - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4. |
| - Goodbye mips64. 31704 lines of code bite the dust. |
| - Replace extern inline with static inline. |
| - Fix return value of strncpy. |
| - Remove a bunch more "$1" clobbers. |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Sep 4 17:31:22 2007 +0200 |
| |
| Fix do_bootm_linux() so that multi-file images with FDT blob boot. |
| |
| Fix incorrect blob address calculation in do_bootm_linux() that prevents |
| booting the kernel from a multi-file image (kernel + initrd + blob). |
| |
| Also, make minor updates to the U-Boot's output and to the coding style. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 041a2554ad619e80dce520c1a33210affcb6a3f2 |
| Author: Gary Jennejohn <gary.jennejohn@freenet.de> |
| Date: Fri Aug 31 14:29:04 2007 +0200 |
| |
| Add support for Sil680 IDE controller. |
| |
| o add drivers/sil680.c to support the Sil680 IDE-controller. |
| o drivers/Makefile: add sil680.o. |
| |
| Signed-off-by: Gary Jennejohn <garyj@denx.de> |
| |
| commit e79021223bc339df655e360645a52c457a74b067 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Sep 6 09:47:40 2007 -0600 |
| |
| bootm/fdt: Only process the fdt if an fdt address was provided |
| |
| Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style |
| kernels using the board info structure (instead of passing a device tree) |
| This change allows the old style booting to be used if the fdt argument |
| was not passed to 'bootm'. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| Acked-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Sep 6 09:46:23 2007 -0600 |
| |
| Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT |
| |
| Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200 |
| |
| Tested on: lite5200b |
| |
| Note: the fixup functions have not been moved to a common place. This |
| patch is targeted for immediate merging as in solves a build issue, but |
| the final name/location of the fixups is still subject to debate. I |
| propose to merge this now, and move the fixups in the next merge window |
| to be usable by all targets. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 41bb76e941929f54a73206fb132f7a4c275543a3 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Thu Sep 6 09:46:17 2007 -0600 |
| |
| libfdt: add convenience function fdt_find_and_setprop() |
| |
| Given the path to a node, fdt_find_and_setprop() allows a property value |
| to be set directly. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 80767a6cead9990d9e77e62be947843c2c72f469 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Wed Sep 5 16:04:41 2007 +0100 |
| |
| Changed API name to coloured_led.h |
| Removed code using deprecated ifdef CONFIG_BOOTBINFUNC |
| Tidied other cpu/arm920t/start.S code |
| |
| commit 56a9270521baaa00e12639a978302a67f61ef060 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Aug 30 16:18:18 2007 -0500 |
| |
| Fix ULI RTC support on MPC8544 DS |
| |
| The RTC on the M1575 ULI chipset requires a dummy read before |
| we are able to talk to the RTC. We accomplish this by adding a |
| second memory region to the PHB the ULI is on and read from it. |
| |
| The second region is added to maintain compatiabilty with Linux's |
| view of the PCI memory map. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit f75e89e9b5714db2b0e80074071dfbdd6f59488a |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Thu Aug 30 01:58:48 2007 -0500 |
| |
| ft_board_setup update 85xx/86xx of pci/pcie bus-range property. |
| |
| pcie is now differentiated from pci. Add 8641 bus-range updates. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 9f5c3d3720e777a572dcdc8af2008b44c7243885 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Sep 4 16:18:38 2007 +0100 |
| |
| Add coloured led interface for ARM boards. |
| Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered. |
| |
| commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Sep 4 14:49:28 2007 +0100 |
| |
| Move include/led.h to board/at91rm9200dk |
| |
| commit 6e4bf9b24e57c15abc6542e685d06380bc64af27 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Sep 4 14:25:51 2007 +0100 |
| |
| Ran Lindent on drivers/at45.c |
| |
| commit 557ab89d294f08dd532f21d19861b40093200a33 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Sep 4 14:23:50 2007 +0100 |
| |
| Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX |
| |
| commit 81b73dec16fd1227369a191e725e10044a9d56b8 |
| Author: Gary Jennejohn <garyj@denx.de> |
| Date: Fri Aug 31 15:21:46 2007 +0200 |
| |
| ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia |
| |
| The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is |
| set to non-zero, because it doesn't support MRM (memory-read- |
| multiple) correctly. We now added the possibility to configure |
| this register in the board config file, so that the default value |
| of 8 can be overridden. |
| |
| Here the details of this patch: |
| |
| o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow |
| board-specific settings. As an example the sequoia board requires 0. |
| Idea from Stefan Roese <sr@denx.de>. |
| o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the |
| PCI IO-space. Obtained from Stefan Roese <sr@denx.de>. |
| o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set |
| CFG_PCI_CACHE_LINE_SIZE to 0. |
| |
| Signed-off-by: Gary Jennejohn <garyj@denx.de> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 60174746c668b309378a91488dded898e9553eae |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Aug 31 10:01:51 2007 +0200 |
| |
| Fix TFTP OACK code for short packets. |
| |
| The old code had a loop limit overflow bug which caused a semi- |
| infinite loop for small packets, because in "i<len-8", "i" was signed, |
| but "len" was unsigned, and "len-8" became a huge number for small |
| values of "len". |
| |
| This is a workaround which replaces broken commit 8f1bc284. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee |
| Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com> |
| Date: Thu Aug 30 15:03:05 2007 +0200 |
| |
| Reduce BOOTDELAY variable to 1 second by default for STK1002 |
| |
| Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a |
| Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com> |
| Date: Thu Aug 30 15:03:04 2007 +0200 |
| |
| Remove double quotation marks around MAC address for STK1002 |
| |
| Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit ff13ac8c7bbebb238e339592de765c546dba1073 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Aug 30 14:42:15 2007 +0200 |
| |
| Backout commit 8f1bc284 as it causes TFTP to fail. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 1900fbf255acba8b94fb442a16408ea85a1d46a6 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Thu Aug 30 02:26:17 2007 -0500 |
| |
| Revert "Fix MPC8544DS PCIe3 scsi." |
| |
| This reverts commit 9468e680. |
| Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Wed Aug 29 18:26:24 2007 -0600 |
| |
| tftp: don't implicity trust the format of recevied packets |
| |
| The TFTP OACK code trusts that the incoming packet is formated as |
| ASCII text and can be processed by string functions. It also has a |
| loop limit overflow bug where if the packet length is less than 8, it |
| ends up looping over *all* of memory to find the 'blksize' string. |
| |
| This patch solves the problem by forcing the packet to be null |
| terminated and using strstr() to search for the sub string. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Aug 29 16:31:18 2007 +0200 |
| |
| ppc4xx: Change lwmon5 default environment to support Linux RTC |
| |
| The Linux PCF8563 RTC driver doesn't do autoprobing, so we need |
| to supply the RTC I2C address as bootline parameter. This patch |
| adds support for this rtc probing parameter to the bootargs: |
| |
| "rtc-pcf8563.probe=0,0x51" |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2602a5c40ae37ab965a4e240854fdaffb51328a4 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Aug 29 09:06:05 2007 -0500 |
| |
| sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE |
| |
| this had slipped through the cracks, since the sbc board was added |
| after I wrote the original patch to remove all these symbols, and |
| before it was merged. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit c5bded3c88e48ae648a75d357dc81a8255fa81f1 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Aug 29 14:05:30 2007 +0200 |
| |
| Add mii_init() prototype |
| |
| to get rid of a *lot* of compiler warnings. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Aug 29 13:35:03 2007 +0200 |
| |
| Disable network support on cmi_mpc5xx board |
| |
| ..because it caused compiler errors and there seems to be no |
| board maintainer to take care of this. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 9468e6804b7e25b0f6f52e53f47bce3175400a16 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Mon Aug 20 09:44:00 2007 -0500 |
| |
| Fix MPC8544DS PCIe3 scsi. |
| |
| <ed.swarthout@freescale.com> |
| |
| The problem is pciauto_setup_device() getting called from fsl_pci_init.c |
| is allocating memory space it doesn't need. |
| |
| Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Tue Aug 21 09:38:59 2007 -0500 |
| |
| 8548cds fixes |
| |
| Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the |
| correct consoledev needed for linux boot. |
| Standardize on fdt{file,addr} var to hold dtb file name. |
| |
| Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Thu Aug 23 15:20:54 2007 -0400 |
| |
| Enable L2 cache for MPC8568MDS board |
| |
| The L2 cache size is 512KB for 8568, print out the correct informaiton. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Wed Aug 22 17:54:49 2007 +0800 |
| |
| Remove the bios emulator binary files from MAI board |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Aug 21 17:00:17 2007 -0500 |
| |
| support board vendor-common makefiles |
| |
| if a board/$(VENDOR)/common/Makefile exists, build it. |
| |
| also add the first such case, board/freescale/common/Makefile, to |
| handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as |
| dictated by board configuration. |
| |
| thusly get rid of alternate build dir errors such as: |
| |
| FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory |
| |
| by putting the common/ mkdir command in its proper place (the common |
| Makefile). Common bits from existing individual board Makefiles have |
| been removed. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd |
| Author: stefano babic <sbabic@denx.de> |
| Date: Tue Aug 21 15:52:33 2007 +0200 |
| |
| Fix: TFTP is not working on little endian systems |
| |
| TFTP does not work anymore after multicast tftp |
| patch was applied on little endian systems. |
| This patch fix it. |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| |
| commit 5f470948570526e9186f053a3003da7719604e90 |
| Author: stefano babic <sbabic@denx.de> |
| Date: Tue Aug 21 15:50:33 2007 +0200 |
| |
| Fix MAC address setting in DM9000 driver. |
| |
| The logic to check if there is a correct MAC address in the DM9000 |
| EEPROM, added in the last patch, is wrong. Now the MAC address is |
| always taken from the environment, even if a suitable MAC is present |
| in the EEPROM. |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| |
| commit 4a8527ef086ec7c89f40674ef024ae6f988a614a |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Tue Aug 21 12:40:34 2007 +0200 |
| |
| MPC5xxx: fix some compiler warnings in USB code |
| |
| Fix the following warnings: |
| - usb.c:xx: warning: function declaration isn't a prototype |
| - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer |
| from pointer wihtout a cast |
| |
| Signed-off-by: Martin Krause <martin.krase@tqs.de> |
| |
| commit 16e23c3f5dab6937f5109365416808c7f15c122b |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Mon Aug 20 23:55:33 2007 -0500 |
| |
| fsl_pci_init - Remove self PCSRBAR allocation |
| |
| CPU physical address space was being wasted by allocating a |
| PCSRBAR PCI inbound region to it's memory space. |
| |
| As a rule, PCSRBAR should be left alone since it does not affect |
| transactions from self and other masters may have changed it. |
| |
| Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com> |
| |
| commit 0e700ce03a23bb1921149bc77008ace7103d5289 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Mon Aug 20 13:56:47 2007 +0200 |
| |
| Fix compiler warning in include/s3c2410.h |
| |
| This patch fixes the "type qualifiers ignored on fuction return tpye" |
| warning for include/s3c2410.h |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea |
| Author: Dirk Behme <dirk.behme@googlemail.com> |
| Date: Mon Aug 20 07:09:05 2007 +0200 |
| |
| Fix compilation error for omap2420h4_config. |
| |
| omap2420h4 switched to cfi, so remove old (already disabled) flash.c |
| and flash_probe() calls in env_flash.c. |
| |
| Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| |
| commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Aug 10 14:34:14 2007 -0500 |
| |
| fdt: remove unused OF_FLAT_TREE_MAX_SIZE references |
| |
| and make some minor corrections to the FDT part of the README. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Aug 29 01:32:05 2007 +0200 |
| |
| Minor coding style cleanup. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Tue Aug 28 17:40:33 2007 +0200 |
| |
| [UC101] Fix: if no CF in the board, U-Boot resets sometimes. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit f98984cb194bb34dbe1db9429d3b51133af30d07 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Tue Aug 28 17:39:14 2007 +0200 |
| |
| IDE: - make ide_inb () and ide_outb () "weak", so boards can |
| define there own I/O functions. |
| (Needed for the pcs440ep board). |
| - The default I/O Functions are again 8 Bit accesses. |
| - Added CONFIG_CMD_IDE for the pcs440ep Board. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 2c05fd125744981e5f2828d24e66ccc20a77d25d |
| Author: Semih Hazar <semih.hazar@indefia.com> |
| Date: Mon Aug 20 19:00:01 2007 +0300 |
| |
| AVR32: Change prototype of memset |
| |
| Signed-off-by: Semih Hazar <semih.hazar@indefia.com> |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 9c02defc29b57945b600714cf61ddfd02b02fb14 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Sat Aug 25 05:07:16 2007 +0200 |
| |
| POST: limit memory test area to not touch global data anymore |
| |
| As experienced on lwmon5, on some boards the POST memory test can |
| corrupt the global data buffer (bd). This patch fixes this issue |
| by checking and limiting this area. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 75e1a84d483e36be10e206e539b028c4889e1158 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Aug 24 15:41:42 2007 +0200 |
| |
| ppc4xx: Add RTC POST test to lwmon5 board configuration |
| |
| Since this RTC POST test is taking quite a while to complete |
| it's only initiated upon special keypress same as the complete |
| memory POST. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d7bfa620037a6d2210159387571bdf93aa32c162 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Aug 24 15:19:10 2007 +0200 |
| |
| ppc4xx: Change GPIO signal for watchdog triggering on lwmon5 |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c25dd8fc25e9ca3695db996a257d9ba4dab414db |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Aug 23 11:02:37 2007 +0200 |
| |
| ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board |
| |
| This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5 |
| board. Now the "eeprom" command can be used to read/write from/to this |
| device. Additionally a new command was added "eepromwp" to en-/disable |
| the write-protect of this 2nd EEPROM. |
| |
| The 1st EEPROM is not affected by this write-protect command. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c64fb30e4c5976007d56fc1789c7a0666082b536 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Aug 22 08:56:09 2007 +0200 |
| |
| ppc4xx: Remove unused option CFG_INIT_RAM_OCM |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 21 16:27:57 2007 +0200 |
| |
| ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based) |
| |
| This patch adds support for the matrix keyboard on the lwmon5 board. |
| Since the implementation in the dsPCI is kind of compatible with the |
| "old" lwmon board, most of the code is copied from the lwmon |
| board directory. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3e66c078003607a7d1d214c15a5f262bc1b4032f |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 19 10:27:34 2007 +0200 |
| |
| Fix some build errors. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 05675735ef77dc23b5e0eb782bad1ff477b55e86 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Aug 18 22:00:38 2007 +0200 |
| |
| Update CHANGELOG. |
| |
| commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Aug 16 22:52:39 2007 -0500 |
| |
| lib_ppc: make board_add_ram_info weak |
| |
| platforms wishing to display RAM diagnostics in addition to size, |
| can do so, on one line, in their own board_add_ram_info() |
| implementation. |
| |
| this consequently eliminates CONFIG_ADD_RAM_INFO. |
| |
| Thanks to Stefan for the hint. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6 |
| Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Date: Fri Aug 17 12:43:44 2007 +0900 |
| |
| PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug |
| |
| This patch has been sent on: |
| - 6 Jun 2007 |
| |
| Many users of PCI config read routines tend to ignore the function |
| ret value, and are only concerned about the contents of *val. Based |
| on this, pci_hose_read_config_{byte,word}_via_dword should initialize |
| the *val on dword read error. |
| |
| Without this fix, for example, we'll go on scanning bus with vendor or |
| header_type uninitialized. This brings many unnecessary config trials. |
| |
| Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| |
| commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Aug 18 14:37:52 2007 +0200 |
| |
| ColdFire: Fix some remaining problems with CFG_CMD_ |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8280f6a1c43247616b68224675188e5ccd124650 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Aug 18 14:33:02 2007 +0200 |
| |
| Coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4a442d3186b31893b4f77c6e82f63c4517a5224b |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Aug 16 19:23:50 2007 -0500 |
| |
| ColdFire: Add M5235EVB Platform for MCF523x |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Aug 17 09:30:00 2007 -0500 |
| |
| mpc83xx: fix typo in DDR2 programming |
| |
| introduced in the implement board_add_ram_info patch as I was cleaning out the |
| magic numbers. sorry. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit e58fe95784d2514fc9c21028dc59f2b319a35d80 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Aug 16 22:53:09 2007 -0500 |
| |
| mpc83xx: move freescale boards to boards/freescale |
| |
| includes build fixes. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Aug 16 22:52:59 2007 -0500 |
| |
| mpc83xx: suppress unused variable 'val8' warning |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit bbea46f76f767b919070b4829bf34c86bd223248 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Aug 16 22:52:48 2007 -0500 |
| |
| mpc83xx: implement board_add_ram_info |
| |
| add board_add_ram_info, to make memory diagnostic output more |
| consistent. u-boot banner output now looks like: |
| |
| DRAM: 256 MB (DDR1, 64-bit, ECC on) |
| |
| and for boards with SDRAM on the local bus, a line such as this is |
| added: |
| |
| SDRAM: 64 MB (local bus) |
| |
| also replaced some magic numbers with their equivalent define names. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 14778585d1389d86d5846efec29e5fce892680ce |
| Author: Tony Li <tony.li@freescale.com> |
| Date: Fri Aug 17 10:35:59 2007 +0800 |
| |
| mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support |
| |
| The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c |
| And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board. |
| |
| Signed-off-by Tony Li <tony.li@freescale.com> |
| |
| commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Aug 16 15:05:11 2007 -0500 |
| |
| ColdFire: Add M54455EVB for MCF5445x |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit a1436a842654a8d3927d082a8ae9ee0a10da62d7 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Aug 16 13:20:50 2007 -0500 |
| |
| ColdFire: Add M5253EVBE platform for MCF52x2 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit a605aacd8324094199402816cc6d9124aba57b8d |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Aug 16 05:04:31 2007 -0500 |
| |
| ColdFire: Add M5249EVB platform for MCF52x2 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 20:32:06 2007 -0500 |
| |
| ColdFire: Update Freescale MCF52x2 platforms |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 19:55:10 2007 -0500 |
| |
| ColdFire: Update EB+MCF-EV123 platform |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 19:46:38 2007 -0500 |
| |
| ColdFire: update TASREG platform for MCF52x2 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 19:45:51 2007 -0500 |
| |
| ColdFire: update r5200 platform for MCF52x2 |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 19:43:20 2007 -0500 |
| |
| ColdFire: idmr platform MCF52x2 update |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 19:41:06 2007 -0500 |
| |
| ColdFire: cobra5272 platform for MCF52x2 update |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 56115665b4a64c10c01440c57749b265e0908fa4 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 19:38:15 2007 -0500 |
| |
| ColdFire: MCF52x2 Header files update |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 19:21:21 2007 -0500 |
| |
| ColdFire: MCF52x2 update |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 18:46:11 2007 -0500 |
| |
| ColdFire: MCF5329 update cache |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 7171977fb8fd77cfb6676953fa9a05789c450513 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 15:40:20 2007 -0500 |
| |
| ColdFire: MCF5329 header file clean up |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Wed Aug 15 15:39:17 2007 -0500 |
| |
| ColdFire: MCF5329 Update and cleanup |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 10327dc5541f947c0cf7e31fef86c4706169607a |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Thu Aug 16 16:35:02 2007 -0500 |
| |
| Add CONFIG_HAS_ETH0 to all boards with TSEC |
| |
| The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether |
| to update TSEC1's device-tree node, so we need to add it |
| to all the boards with TSECs. Do this for 83xx and 86xx, too, |
| since they will eventually do something similar. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Aug 16 15:05:04 2007 -0500 |
| |
| Update MPC8544 DS PCI memory map |
| |
| The PCIe bus that the ULI M1575 is connected to has no possible way of |
| needing more than the fixed amount of IO & Memory space needed by the ULI. |
| |
| So make it use far less IO & memory space and have it use the shared LAW. This |
| free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed |
| by each bus. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit ea5877e31ed63ade948fd1293895ec23fe01472e |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Thu Aug 16 11:01:21 2007 -0500 |
| |
| Fix up some fdt issues on 8544DS |
| |
| It looks like we had a merge issue that duplicated a bit of code |
| in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get |
| the MAC address properly set in the device tree on boot for TSEC1 |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 07bc20560cb9d3d186cca268c05c82762e8c55ad |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Thu Aug 16 15:16:03 2007 +0200 |
| |
| PPC4xx:HCU4/5 cleanup |
| |
| Minor cleanups to confirm to the u-boot coding style. |
| Some german expressions -> english. |
| HCU5 enforces a unique IP adress for a given slot in the rack. |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Thu Aug 16 15:16:02 2007 +0200 |
| |
| PPC4xx:HCU4/5 cleanup ecc/sdram init |
| |
| Make ecc initialisation robust, as DDR2-ECC errors may be generated |
| while zeroing the RAM. |
| |
| Return 16 bytes (a cacheline) less than the available memory, as the |
| board and/or PPC440EPx might have problems accessing the last bytes. |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit d35b508a55508535b6e8445b718585d27df733d3 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Aug 15 22:29:56 2007 -0500 |
| |
| fdt: suppress unused variable 'bd' warning |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 82bd9ee77490588d4da785d75829ca63d0176baf |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Aug 15 20:06:50 2007 -0500 |
| |
| Fix warnings from of_data copy fix |
| |
| Forgot to cast of_flat_tree to ulong. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 7613afda77d5eec0f47d303025b0c661b70e4c73 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Aug 15 20:03:44 2007 -0500 |
| |
| Don't wait for disconnected TSECs |
| |
| The TSEC driver's PHY code waits a long time for autonegotiation to |
| complete, even if the link is down. The PHY knows the link is |
| down or up before autonegotiation completes, so we can short-circuit |
| the process if the link is down. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit b96c83d4ae475a70ef2635cd0e748174c44c8601 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Aug 15 20:03:34 2007 -0500 |
| |
| Fix numerous bugs in the 8568 UEC support |
| |
| Actually, fixed a large bug in the UEC for *all* platforms. |
| How did this ever work? |
| |
| uec_init() did not follow the spec for eth_init(), and returned |
| 0 on success. Switch it to return the link like tsec_init() |
| (and 0 on error) |
| |
| The immap for the 8568 was defined based on MPC8568, rather than |
| CONFIG_MPC8568 |
| |
| CONFIG_QE was off |
| |
| CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0" |
| |
| Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is |
| enabled |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 3a79013e2adda53332dfd0b511066a805e929a9d |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Aug 15 20:03:25 2007 -0500 |
| |
| Define tsec flag values in config files |
| |
| The tsec_info structure and array has a "flags" field for each |
| ethernet controller. This field is the only reason there are |
| settings. Switch to defining TSECn_FLAGS for each controller |
| in the config header, and we can greatly simplify the array, and |
| also simplify the addition of future boards. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit ec7238229507e7f47533a611ea8c53319d234cf3 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Aug 15 20:03:13 2007 -0500 |
| |
| Add support for building all boards with a TSEC |
| |
| Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards. |
| Now we can do a MAKEALL test on all of them! |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Aug 15 17:30:56 2007 -0500 |
| |
| Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards |
| |
| The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed" |
| neglected to *also* put the code inside the similar #ifdef |
| for CONFIG_OF_FLAT_TREE. |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 78f9fef7f406078c8bf7191e665a73f795157746 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Wed Aug 15 15:46:46 2007 -0500 |
| |
| mpc885ads: Don't define CONFIG_BZIP2. |
| |
| bzip2 requires a significant chunk of malloc space, and there isn't |
| enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area |
| and a downloaded image at 0x400000. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 002275a3ed8b114885f6702d6d544d0780dfe689 |
| Author: Michal Simek <Monstr@seznam.cz> |
| Date: Thu Aug 16 08:54:10 2007 +0200 |
| |
| Bios emulator - fix microblaze toolchain problem |
| |
| microblaze CPU have problem with bios_emulator code. |
| Microblaze toolchain doesn't support PRAGMA PACK. |
| |
| Signed-off-by: Michal Simek <monstr@monstr.eu> |
| |
| commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Aug 16 11:51:04 2007 +0200 |
| |
| Minor Coding Style fix; Update CHANGELOG file. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Aug 16 11:21:49 2007 +0200 |
| |
| ppc4xx: Remove #warning in esd auto_update.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2d78074d2e806edc380c1464eb9e5df335ece65e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 22 17:32:28 2007 +0200 |
| |
| ppc7xx: Update CPCI750 board |
| |
| This small CPCI750 update extends the board specific command |
| "show_config" to display the Marvell strapping registers and |
| extends the PCI IDE controller. |
| |
| Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Thu Aug 16 10:46:28 2007 +0200 |
| |
| [FIX] Changes for bios_emulator code for others architecture |
| |
| commit 6e0e2253f039344f8ebd2787285fdba90e6714e8 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Thu Aug 16 10:45:09 2007 +0200 |
| |
| [FIX] Remove unused include file |
| |
| commit 9de469bd960cc1870bb40d6672ed42726b8b50d7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Aug 16 10:18:33 2007 +0200 |
| |
| ppc4xx: Only enable POST FPU test on Sequoia and not Rainier |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Aug 16 09:54:51 2007 +0200 |
| |
| Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 02ba7022f62bb75908296c58c63866e1d294b69a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Aug 16 09:52:29 2007 +0200 |
| |
| ppc4xx: Update Sequoia/Rainier bootstrap command |
| |
| As suggested by David Mitchell, here an update for the Sequoia/Rainier |
| bootstrap command. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 35cc4e4823668e8745854899cfaedd4489beb0ef |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Aug 15 22:30:39 2007 -0500 |
| |
| mpc83xx: enable libfdt by default on freescale boards |
| |
| this enables libfdt code by default for the |
| freescale mpc8313erdb, mpc832xemds, mpc8349emds, |
| mpc8349itx and gp boards. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 3fde9e8b22cfbd7af489214758f9839a206576cb |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Aug 15 22:30:33 2007 -0500 |
| |
| mpc83xx: migrate remaining freescale boards to libfdt |
| |
| this adds libfdt support code for the freescale |
| mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx, |
| and gp boards. |
| |
| Boards remain compatible with OF_FLAT_TREE. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Aug 15 22:30:26 2007 -0500 |
| |
| mpc83xx: move common /memory node update mechanism to cpu.c |
| |
| also adds common prototypes to include/common.h. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Aug 15 22:30:19 2007 -0500 |
| |
| mpc83xx: remaining 8360 libfdt fixes |
| |
| PCI clocks and QE frequencies weren't being updated, and the core clock |
| was being updated incorrectly. This patch also adds a /memory node if |
| it doesn't already exist prior to update. |
| |
| plus some cosmetic trimming to single line comments. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit f4b2ac5ed9aaff9920d487bff8a59696c083a524 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Aug 15 22:30:12 2007 -0500 |
| |
| mpc83xx: fix UEC2->1 typo in libfdt setup code |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Aug 15 22:30:05 2007 -0500 |
| |
| mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb |
| |
| and reorder the existing 83xx maintainers alpha. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 5b4de9309d7a03aa1db2e5391ab696363391f460 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Wed Aug 15 21:15:05 2007 +0200 |
| |
| [FIX] Resolve problem with warnings |
| microblaze toolchain don't support PRAGMA PACK. |
| |
| commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Wed Aug 15 21:05:07 2007 +0200 |
| |
| [FIX] Correction command setting for Microblaze boards |
| |
| commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Wed Aug 15 21:03:41 2007 +0200 |
| |
| [FIX] Correction command definition |
| |
| commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Aug 15 11:55:35 2007 -0500 |
| |
| 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h |
| |
| Remove a leftover in net/tftp.c while we're at it. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Aug 15 12:20:40 2007 -0500 |
| |
| Move the MPC8641HPCN board under board/freescale. |
| |
| Minor path corrections needed to ensure buildability. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 8662577fe36fdb6a44b55b998d9daac6392a736a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Aug 15 11:46:22 2007 -0500 |
| |
| 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h |
| |
| Remove a leftover in net/tftp.c while we're at it. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 210f463c71917b7a4495c2103c228b9c179ae64d |
| Author: Jerry Van Baren <gvb.uboot@gmail.com> |
| Date: Wed Aug 15 11:13:15 2007 -0400 |
| |
| Fix where the #ifdef CFG_BOOTMAPSZ is placed. |
| |
| Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb |
| interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT) |
| when it should have gone inside of the conditional. As a result, it |
| broke non-LIBFDT board builds. |
| |
| Also added a missing "not." to the comment. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 0e19209767194a97cec6d93dba9e64d1da8d548e |
| Author: Niklaus Giger <niklaus.giger@netstal.com> |
| Date: Wed Aug 15 12:14:23 2007 +0200 |
| |
| PPC4xx:HCU4/5-Board fix compile warning |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Tue Aug 14 14:06:45 2007 -0500 |
| |
| Fix malloc size error in ahci_init_one. |
| |
| Typically this causes scsi init to corrupt the |
| devlist and break the coninfo command. |
| Fix a compiler size warning. |
| |
| Signed-off-by: Jason Jin <jason.jin@freescale.com> |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit b361acd64fd2525c081b9b288b0804efe209c0e9 |
| Author: ksi@koi8.net <ksi@koi8.net> |
| Date: Tue Aug 14 10:02:16 2007 -0700 |
| |
| TI DaVinci - fix unsupported %hhx format |
| |
| Signed-off-by: Sergey Kubushyn <ksi@koi8.net> |
| |
| commit f01dbb5424a81453c81190dd30e945891466f621 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Aug 14 18:42:36 2007 +0200 |
| |
| Coding style cleanup. Update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue Aug 14 10:32:59 2007 -0500 |
| |
| Fix initrd/dtb interaction |
| |
| The original code would wrongly relocate the blob to be right before |
| the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ, |
| if it is defined. So we make two changes: |
| |
| 1) flag the blob for relocation whenever its address is above BOOTMAPSZ |
| |
| 2) If the blob is being relocated, relocate it before kbd, not initrd |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit e54b970173769307a116bd34028b6d0c2eea2a4e |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Aug 14 15:40:00 2007 +0100 |
| |
| Supply spi interface in at45.c |
| |
| commit 4ce846ec59f36b85d6644a769690ad3feb667575 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 14 15:12:01 2007 +0200 |
| |
| POST: Fix merge problem |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 14 15:03:17 2007 +0200 |
| |
| Coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 779e975117a75e91fcebe226a63104dbfb924ab1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 14 14:44:41 2007 +0200 |
| |
| ppc4xx: Add initial Zeus (PPC405EP) board support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c5a172a5fd636c12467429e3f7910e53773979c6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 14 14:41:55 2007 +0200 |
| |
| POST: Add option for external ethernet loopback test |
| |
| When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST |
| is not done using an internal loopback connection, but by assuming |
| that an external loopback connector is plugged into the board. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit eb2b4010ae426245172988804ee8d9193fb41038 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 14 14:39:44 2007 +0200 |
| |
| POST: Add ppc405 support to cache and UART POST |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Aug 14 10:46:32 2007 +0100 |
| |
| Replace lost end of at45.c. |
| |
| commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Aug 14 10:30:06 2007 +0100 |
| |
| Update Makefiles for merged and split at45.c. |
| |
| commit 3454cece2db57cb9eb7087995f7e73066a163f71 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Aug 14 10:21:06 2007 +0100 |
| |
| Delete the merged files. |
| |
| commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Aug 14 10:14:05 2007 +0100 |
| |
| Add the files. |
| |
| commit d4fc6012fd0a5c211b825691f44b06f8032c0551 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Aug 14 10:10:52 2007 +0100 |
| |
| Add MACH_TYPE records for several AT91 boards. |
| Merge to two at45.c files into a common file, split to at45.c and spi.c |
| Fix spelling error in DM9161 PHY Support. |
| Initialize at91rm9200 board (and set LED). |
| Add PIO control for at91rm9200dk LEDs and Mux. |
| Change dataflash partition boundaries to be compatible with Linux 2.6. |
| |
| Signed-off-by: Peter Pearse <peter.pearse@arm.com> |
| Signed-off-by: Ulf Samuelsson <ulf@atmel.com> |
| |
| commit 4ef35e53c693556c54b0c22d6f873de87bade253 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Aug 14 09:54:46 2007 +0200 |
| |
| Coding style cleanup, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Aug 14 09:47:27 2007 +0200 |
| |
| Coding style cleanup; rebuild CHANGELOG |
| |
| commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a |
| Author: Randy Vinson <rvinson@linuxbox.(none)> |
| Date: Tue Feb 27 19:42:22 2007 -0700 |
| |
| 85xxCDS: Add make targets for legacy systems. |
| |
| The PCI ID select values on the Arcadia main board differ depending |
| on the version of the hardware. The standard configuration supports |
| Rev 3.1. The legacy target supports Rev 2.x. |
| |
| Signed-off-by Randy Vinson <rvinson@mvista.com> |
| |
| commit e41094c7e38177c755fbd9b182018069614f080d |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue Aug 14 01:50:09 2007 -0500 |
| |
| 85xxCDS: Enable the VIA PCI-to-ISA bridge. |
| |
| Author: Randy Vinson <rvinson@linuxbox.(none)> |
| |
| Enable the PCI-to-ISA bridge in the VIA Southbridge located on the |
| Arcadia main board. |
| |
| Signed-off-by: Randy Vinson <rvinson@mvista.com> |
| Signed-off-by: York Sun <yorksun@freescale.com> |
| |
| commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue Aug 14 00:14:25 2007 -0500 |
| |
| Add support for UEC to 8568 |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit c59e4091ffe0148398b9e9ff14a019ea038b7432 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Tue Jun 19 14:18:34 2007 -0400 |
| |
| Add PCI support for MPC8568MDS board |
| |
| This patch is against u-boot-mpc85xx.git of www.denx.com |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com> |
| |
| commit d111d6382c99fdea08c2312eeeae8786945e189a |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Tue Jun 19 14:18:32 2007 -0400 |
| |
| Empirically set cpo and clk_adjust for mpc85xx DDR2 support |
| |
| This patch is against u-boot-mpc85xx.git of www.denx.com |
| |
| Setting cpo to 0x9 for frequencies higher than 333MHz is verified on |
| both MPC8548CDS board and MPC8568MDS board, especially for supporting |
| 533MHz DDR2. |
| |
| Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for |
| DDR2 on all current board versions especially ver 1.92 or later to bring |
| up. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit 3db0bef59eab1155801618cef5c481e97553b597 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Aug 7 18:07:27 2007 -0500 |
| |
| Use an absolute address when jumping out of 4k boot page |
| |
| On e500 when we leave the 4k boot page we should use an absolute address since |
| we don't know where the board code may want us to be really running at. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Aug 13 14:49:59 2007 -0500 |
| |
| MPC85xx BA bits not set for 3-bit bank address DIMM |
| |
| The current implementation does not set the number of bank address bits |
| (BA) in the processor. The default assumes 2 logical bank bits. This |
| works fine for a DIMM that uses devices with 4 internal banks (SPD |
| byte17 = 0x4) but needs to be set appropriately for a DIMM that uses |
| devices with 8 internal banks (SPD byte17 = 0x8). |
| |
| Signed-off-by: Greg Davis <DavisG@embeddedplanet.com> |
| |
| commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Aug 13 14:38:06 2007 -0500 |
| |
| Fix minor 85xx warnings |
| |
| Some patches had inserted warnings into the build: |
| * mpc8560ads declared data without using it |
| * cpu_init declared ecm and immap without using it in all CONFIGs |
| * MPC8548CDS.h had its default filenames changed so that they contained |
| "\m" in the paths. Made the defaults not Windows-specific (or |
| anything-specific) |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit f2cff6b104f82b993bef6086ce0c97159bbe1add |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Jul 27 01:50:52 2007 -0500 |
| |
| 8548cds PCIE support. |
| |
| Make the early L1 cache stack region guarded to prevent speculative |
| fetches outside the locked range. |
| |
| Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions. |
| init.S whitespace cleanup. |
| |
| Allow TEXT_BASE value to be specified on command line. This allows it |
| to be set to 0xfffc0000 which cuts the uboot binary in half. |
| |
| Clear and enable lbc and ecm errors. |
| |
| Update last_busno in device-tree for pci and pcie. |
| |
| Remove load of obsolete cpu/mpc85xx/pci.0 |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Jul 27 01:50:51 2007 -0500 |
| |
| 8544ds PCIE support |
| |
| PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address. |
| |
| Enable LBC and ECM errors and clear error registers. |
| |
| Add tftpflash env var to get uboot from tftp server and flash it. |
| |
| Add pci/pcie convenience env vars to display register space: |
| "run pcie3regs" to see all pcie3 ccsr registers |
| "run pcie3cfg" to see all cfg registers |
| Whitespace cleanup and MPC8544DS.h |
| |
| Enable CONFIG_INTERRUPTS. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue Aug 14 01:34:21 2007 -0500 |
| |
| 85xx start.S cleanup and exception support |
| |
| From: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| Support external interrupts from platform to eliminate system hangs. |
| Define CONFIG_INTERRUPTS board configure option to enable. |
| Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC. |
| |
| Remove extra cpu initialization redundant with hardware initialization. |
| Whitespace cleanup. |
| |
| Define and use _START_OFFSET consistent with other processors using |
| ppc_asm.tmpl |
| |
| Move additional code from .text to boot page to make room for |
| exception vectors at start of image. |
| |
| Handle Machine Check, External and Critical exceptions. |
| |
| Fix e500 machine check error determination in traps.c |
| |
| TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue Aug 14 01:33:18 2007 -0500 |
| |
| Add MPC8544DS README |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 40c7f9b0de4e300370adfc704128fa0f79a143b6 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Jul 27 01:50:48 2007 -0500 |
| |
| 85xx allow debugger to configure ddr. |
| |
| Only check for mpc8548 rev 1 when compiled for 8548. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Jul 27 01:50:47 2007 -0500 |
| |
| mpc85xx L2 cache reporting and SRAM relocation option. |
| |
| Allow debugger to override flash cs0/cs1 settings to enable alternate |
| boot regions |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Jul 27 01:50:46 2007 -0500 |
| |
| e500 needs ppc_asm.tmp MCK_EXCEPTION |
| |
| Always define MCK_EXCEPTION macro - so e500 can use it too. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 53a5c424bf8655b7b4e2c305a441963259a26a81 |
| Author: David Updegraff <dave@cray.com> |
| Date: Mon Jun 11 10:41:07 2007 -0500 |
| |
| multicast tftp: RFC2090 |
| |
| Implemented IETF RFC2090, Multicast TFTP. Initial implementation |
| on Realtek RTL8139 and Freescale TSEC. |
| |
| Signed-off-by: David Updegraff <dave@cray.com> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1 |
| Author: Wilson Callan <wcallan@savantav.com> |
| Date: Sat Jul 28 10:56:13 2007 -0400 |
| |
| New CONFIG_BOOTP_SERVERIP option |
| |
| Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different |
| from the bootp server |
| |
| Signed-off-by: Wilson Callan <wcallan@savantav.com> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1 |
| Author: Mike Rapoport <mike@compulab.co.il> |
| Date: Sun Aug 12 08:48:27 2007 +0300 |
| |
| Add ability to take MAC address from the environment to DM9000 driver |
| |
| Signed-off-by: Mike Rapoport <mike@compulab.co.il> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit be5d72d10d47609326226225181e301fb9a33b58 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Aug 13 21:57:53 2007 +0200 |
| |
| Minor coding style cleanup. Update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05 |
| Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Date: Sat Aug 11 06:54:58 2007 -0500 |
| |
| Modify SBC8641D to use new Freescale PCI routines |
| |
| PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT |
| adapter. |
| |
| Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Signde-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a08458303e7f9db67f296980036d3292c35cb45c |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri Jun 29 18:38:51 2007 +0200 |
| |
| atmel_mci: Fix data timeout value |
| |
| Calculate the data timeout based on values from the CSD instead of |
| just using a hardcoded DTOR value. This is a backport of a similar fix |
| in BSP 2.0, with one additional fix: the DTOCYC value is rounded up |
| instead of down. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 0ba8eed28b575626b17e0a7882f923b83e0d7584 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Mon Aug 13 17:22:31 2007 +0200 |
| |
| AVR32: Include <div64.h> instead of <asm/div64.h> |
| |
| include/asm-avr32/div64.h was recently moved to include/div64.h, but |
| cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of |
| the patch was merged perhaps?) |
| |
| This patch updates cpu/at32ap/interrupts.c so that the avr32 port |
| compiles again. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit f0d1246ed7cb5a88522244c596d7ae7e6f161283 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Wed Jun 27 13:34:26 2007 +0200 |
| |
| atmel_mci: Use 512 byte blocksize if possible |
| |
| Instead of always using the largest blocksize the card supports, check |
| if it can support smaller block sizes and use 512 bytes if possible. |
| Most cards do support this, and other parts of u-boot seem to have |
| trouble with block sizes different from 512 bytes. |
| |
| Also enable underrun/overrun protection. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> |
| |
| commit 273db7e1bdd1937e32f1d4507321bb721ebd3118 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Aug 13 09:05:33 2007 +0200 |
| |
| ppc4xx: Fix problem in PLL clock calculation |
| |
| This patch was originall provided by David Mitchell <dmitchell@amcc.com> |
| and fixes a bug in the PLL clock calculation. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 12 21:34:50 2007 +0200 |
| |
| Update CHANGELOG |
| |
| commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 12 21:34:34 2007 +0200 |
| |
| Minor alignment of output, 2nd try. |
| Also update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 6b309f22a724fad8418e811751a0741b893419cf |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 12 20:35:49 2007 +0200 |
| |
| Minor alignment of output |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 6f6d7b9c8559e241e8d232621542b8b59699b07b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 12 18:28:18 2007 +0200 |
| |
| Cleanup output on ADS5121 board |
| |
| Signed-off-by: Wolfgang Denk |
| |
| commit a4d2636f2a859245ed3a401f26189da2dfda4ceb |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 12 15:11:38 2007 +0200 |
| |
| Adapt board configuration and fix kernel crash on MCC200 board. |
| |
| The update procedure was modified to turn off the USB subsystem |
| before exit for MCC200 and TRAB. This is necessary as otherwise the |
| USB controller continues to write periodically to system memory! |
| |
| MCC200-specific notes: |
| - the patch disables the magic key check for MCC200 |
| - the patch contains the configuration changes made |
| for the new revision of the board. |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 12 14:47:54 2007 +0200 |
| |
| Adjust default configuration of ADS5121 board. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sun Aug 12 14:27:39 2007 +0200 |
| |
| Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5fe6be6208dda852c3564e384bd78d75784dea3e |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Tue Aug 7 21:14:22 2007 -0400 |
| |
| Improve error print messages. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 99dffca3b7590a16a00bc475c860b67b2a3f1462 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jul 17 13:57:04 2007 -0500 |
| |
| fdt: allow for builds that don't want env and bd_t nodes |
| |
| protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the |
| area. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 91148bf7aeba142d6f348805db7625db7da64d6f |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jul 17 13:56:53 2007 -0500 |
| |
| fdt: do board setup based on fdt address specified on bootm line |
| |
| The last fdt patch to bootm did board setup based on the address |
| specified by a prior fdt address command invocation. The bootm |
| code, as its call to fdt_chosen does, should use the fdt specified |
| by the user on the bootm command. Note this restores full |
| functionality for the 8360's existing default boot environment |
| values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr' |
| before booting a kernel). |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit e125a2ffc209dd34794e326c7175658253beadf3 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Tue Jul 10 20:40:39 2007 -0400 |
| |
| Call ft_board_setup() from the bootm command. |
| |
| In the patch titled "Create new fdt boardsetup command..." I removed the |
| call to ft_board_setup() from the routine fdt_chosen(), but I forgot |
| to add a direct call back into cmd_bootm.c |
| |
| This fixes the oversight by adding the direct call to the bootm command. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Mon Jun 25 23:25:28 2007 -0400 |
| |
| Create new fdt boardsetup command, fix bug parsing [] form of set values. |
| |
| Previously ft_board_setup() was called by fdt_chosen() which was not |
| really correctly structured. This splits ft_board_setup() out by creating |
| a new fdt boardsetup command. |
| |
| Fix a bug when parsing fdt set command values which have the square |
| bracket form [00 11 22 33] - the length was updated incorrectly in when |
| parsing that form. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 6f35ded9e85493595e0eb66a82b502a95326d049 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Mon Jun 25 20:55:58 2007 -0400 |
| |
| Tighten up the error messages. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit c45874b05aae897a6c29d1a97d4bb708fca2756c |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Mon Jun 25 19:52:23 2007 -0400 |
| |
| Asthetic improvements: error messages and line lengths. |
| |
| Tighten up the error messages, split overlength lines. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Fri May 25 22:08:57 2007 -0400 |
| |
| Fix fdt_chosen() to call ft_board_setup(), clean up long lines. |
| |
| The fdt_chosen() function was adding/seting some properties ad-hoc |
| improperly and duplicated (poorly) what was done in ft_board_setup() |
| |
| Clean up long lines (setting properties, printing errors). |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 06e19a07701c968f15d72c083b5872a1a11c7b01 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Mon May 21 23:27:16 2007 -0400 |
| |
| For fdt_find_node_by_path(), handle the root path properly. |
| |
| Also removes the special case root path detection in cmd_fdt.c since it |
| is no longer necessary. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 9675ee7208ab965d13ea8d8262d77ac4160ef549 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Thu May 17 23:54:36 2007 -0400 |
| |
| Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT |
| |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| Acked-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 1a861169bc3758f9de3aead62b058736c6891246 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Wed Jun 6 22:47:58 2007 -0400 |
| |
| Replace fdt_node_offset() with fdt_find_node_by_path(). |
| |
| The new name matches more closely the kernel's name, which is also |
| a much better description. |
| |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| Acked-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit addd8ce83078c25f0eca5f23adbdfc64ca50a243 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Wed May 16 22:39:59 2007 -0400 |
| |
| Fix cmd_fdt line lengths, refactor code. |
| |
| Break lines that were greater than 80 characters in length. |
| Move the fdt print and property parsing code to separate static functions |
| to reduce coding clutter in the fdt_cmd handling body. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 25114033ab21788810c48ba4df103b649da1223b |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat May 12 09:47:25 2007 -0400 |
| |
| FDT command improvements. |
| |
| Fix "fdt set" so that it will create a non-existing property. |
| Add "fdt mknode" to create nodes. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 38eb508e8e811e2e57628f445de3a24a23c7d804 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat May 12 09:45:46 2007 -0400 |
| |
| Reorganize and fix problems (returns) in the bootm command. |
| |
| Do *NOT* return after the "point of no return" has been passed. |
| If something goes wrong, the board must be reset after that point. |
| Move the "Transferring control to Linux" debug message back to where it |
| belongs: just before transferring control to linux. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 89c8757d8f213c47709bdc4efe0695263a6080a6 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Tue May 8 21:27:35 2007 -0400 |
| |
| Fix bugs in the CONFIG_OF_LIBFDT |
| |
| Stupid coding mistakes (identified by Timur Tabi, thanks). |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Wed Apr 25 22:47:15 2007 -0400 |
| |
| Improve fdt move length handling. |
| |
| Make the length parameter optional: if not specified, do the move using |
| the current size unchanged. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Wed Apr 25 22:23:36 2007 -0400 |
| |
| Minor code clean up. |
| |
| Declare the variable fdt properly as extern. |
| Call the "set_fn" function pointer the "short way" without the full |
| dereferencing syntax. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Wed Apr 25 21:24:27 2007 -0400 |
| |
| Improve error messages, more informative. |
| |
| Print more than the raw libfdt error message strings. This is especially |
| useful for cluing in the user when the bootm command aborts due to |
| blob problems. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Fri Apr 20 22:46:53 2007 -0400 |
| |
| libfdt: Conditionally compile based on CONFIG_OF_LIBFDT |
| |
| This is the way u-boot reduces configured-out code. At Wolfgang |
| Grandegger and Wolfgang Denk's request, make libfdt conform. |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| |
| commit 923efd286411ed052d9e074f59f8986d6081061c |
| Author: Bruce Adler <bruce.adler@ccpu.com> |
| Date: Fri Aug 10 14:54:47 2007 -0700 |
| |
| add image size and descriptors for Spartan 3E FPGA chips |
| |
| Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1) |
| |
| Signed-off by: Bruce Adler <bruce.adler@ccpu.com> |
| |
| commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Aug 10 15:34:48 2007 -0500 |
| |
| make MAKEALL more immune to merge conflicts |
| |
| ..by placing board entries one per line, as suggested by jdl. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Fri Aug 10 13:28:25 2007 -0500 |
| |
| README: Remove outdated cpu type, board type, and NAME_config lists |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 49bb59912d21aacb507eb81fd21fb7af650c706c |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Fri Aug 10 15:48:59 2007 +0800 |
| |
| mpc83xx: Suppress the warning 'burstlen' |
| |
| suppress the warning 'burstlen' of spd_sdram. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit c646bba6465a45c60746d4cc1602cd06c1960f2d |
| Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Date: Thu Aug 9 15:11:03 2007 -0500 |
| |
| Add support for SBC8641D. Config files. |
| |
| Add support for Wind River's SBC8641D reference board. |
| |
| Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Acked-by: Wolfgang Denk <wd@denx.de> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 8ac273271d57321f90505c7a51cdb1ef2113b628 |
| Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Date: Thu Aug 9 15:10:53 2007 -0500 |
| |
| Add support for SBC8641D. Board files. |
| |
| Add support for Wind River's SBC8641D reference board. |
| |
| Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Acked-by: Wolfgang Denk <wd@denx.de> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit c2c0ab4aff86622b837a48a0e560351f9afafb95 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Aug 10 20:34:58 2007 +0200 |
| |
| Conding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e |
| Author: Sergey Kubushyn <ksi@koi8.net> |
| Date: Fri Aug 10 20:26:18 2007 +0200 |
| |
| [ARM] TI DaVinci support, hopefully final |
| |
| Add support for the following DaVinci boards: |
| - DV_EVM |
| - SCHMOOGIE |
| - SONATA |
| |
| Changes: |
| |
| - Split into separate board directories |
| - Removed changes to MTD_DEBUG (or whatever it's called) |
| - New CONFIG_CMD party line followed |
| - Some cosmetic fixes, cleanup etc. |
| - Patches against the latest U-Boot tree as of now. |
| - Fixed CONFIG_CMD_NET in net files. |
| - Fixed CONFIG_CMD_EEPROM for schmoogie. |
| - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and |
| DV_EVM. Can't check if it works on SONATA, don't have a board any more, |
| but it at least compiles. |
| |
| Here is an excerpt from session log on SCHMOOGIE... |
| |
| U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17) |
| |
| DRAM: 128 MB |
| NAND: 128 MiB |
| In: serial |
| Out: serial |
| Err: serial |
| ARM Clock : 297MHz |
| DDR Clock : 162MHz |
| ETH PHY : DP83848 @ 0x01 |
| U-Boot > iprobe |
| Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F |
| U-Boot > ping 192.168.253.10 |
| host 192.168.253.10 is alive |
| U-Boot > |
| |
| Signed-off-by: Sergey Kubushyn <ksi@koi8.net> |
| Acked-by: Dirk Behme <dirk.behme@gmail.com> |
| Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 2e4d94f1e3c2961428967a33b6ff2520568391b3 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Jul 27 01:50:45 2007 -0500 |
| |
| fsl_pci_init cleanup. |
| |
| Do not enable normal errors created during probe (master abort, perr, |
| and pcie Invalid Configuration access). |
| |
| Add CONFIG_PCI_NOSCAN board option to prevent bus scan. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Fri Jul 27 01:50:44 2007 -0500 |
| |
| pciauto_setup_device bars_num fix |
| |
| Passing bars_num=0 to pciauto_setup_device should assign no bars. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Aug 6 17:39:44 2007 -0500 |
| |
| 8641hpcn: Do correct sized pointer math. |
| |
| When I rebased Ed's patch and cleaned up a few compilation |
| problems, I apparently rebased my brain on crack first. |
| Fix that by doing (char *) sized pointer math as needed. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit cfc7a7f5bb3273c9951173c788001d45118f141f |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Aug 2 14:42:20 2007 -0500 |
| |
| cpu/86xx fixes. |
| |
| Remove rev 1 fixes. |
| Always set PICGCR_MODE. |
| Enable machine check and provide board config option |
| to set and handle SoC error interrupts. |
| |
| Include MSSSR0 in error message. |
| |
| Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Aug 10 10:42:25 2007 +0200 |
| |
| Coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f |
| Author: Dirk Behme <dirk.behme@googlemail.com> |
| Date: Thu Aug 2 17:42:08 2007 +0200 |
| |
| Make use of generic 64bit division in nand_util.c |
| |
| Use generic 64bit division in nand_util.c. This makes nand_util.c |
| independent of any toolchain 64bit division. |
| |
| Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| |
| commit f7c086e94e8ce9aad7268af97f73aa6884686f27 |
| Author: Dirk Behme <dirk.behme@googlemail.com> |
| Date: Thu Aug 2 17:41:14 2007 +0200 |
| |
| Move 64bit division from avr32 to generic lib |
| |
| Move the 64bit division from lib_avr32 to lib_generic. With this, all |
| boards can do_div/__div64_32 if needed, not only avr one. Code is put |
| to lib_generic, so no larger memory footprint if not used. No code |
| modifications. Thanks for proposal by HÃ¥vard Skinnemoen. |
| |
| Signed-off-by: Dirk Behme <dirk.behme@gmail.com> |
| |
| commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894 |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Jul 27 11:31:22 2007 +0200 |
| |
| Add PPC4xx-HCU4 and HCU5 boards: HCU5 files |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 6e5de26c6e7580faf16e87745cd488b92b492d0c |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Jul 27 11:30:33 2007 +0200 |
| |
| Add PPC4xx-HCU4 and HCU5 boards: HCU4 files |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit e8397fc78c9394d71de233a4d810fbc9047e4c76 |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Jul 27 11:38:26 2007 +0200 |
| |
| Add PPC4xx-HCU4 and HCU5 boards: common files |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit ac982ea5a4f2f993efcf52dca122f5a59df047d8 |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Jul 27 11:28:44 2007 +0200 |
| |
| Add PPC4xx-HCU4 and HCU5 boards: make related |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 137fdd9f474ecb853efdace5200576308c67f18d |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Jul 27 11:28:03 2007 +0200 |
| |
| Add PPC4xx-HCU4 and HCU5 boards: HCU5 config |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2 |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Jul 27 11:27:15 2007 +0200 |
| |
| Add PPC4xx-HCU4 and HCU5 boards: HCU4 config |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421 |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Jul 27 11:25:31 2007 +0200 |
| |
| Add PPC4xx-HCU4 and HCU5 boards: READMEs |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 641cca9569ce351ddb287fd3343d8b1dcb591db4 |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Fri Jul 27 11:37:40 2007 +0200 |
| |
| Add PPC4xx-HCU4 and HCU5 boards: Infrastructure |
| |
| This series of patches adds support for 2 boards from Netstal Maschinen. |
| |
| The HCU4 has a PPC405Gpr and |
| the HCU5 has a PPC440EPX. |
| |
| The HCU4 has a somehow complicated flash setup, as the booteprom is |
| only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more |
| elegant solution. |
| |
| The HCU5 has only a booteprom as the whole code will be downloaded from a |
| different board which has HD, CD-ROM, etc and where all code is stored. |
| |
| This is my third try. I incorporated all suggestions made by Wolfgang and Stefan. |
| Thanks them a lot. |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> |
| |
| commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Aug 10 08:42:55 2007 +0200 |
| |
| ppc4xx: Update lwmon5 POST configuration |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4 |
| Author: Yuri Tikhonov <yur@emcraft.com> |
| Date: Fri Aug 10 08:25:22 2007 +0200 |
| |
| POST: Add ppc4xx UART POST support without external uart clock (lwmon5) |
| |
| The patch adds support for UART POST on ppc44x-based boards with no |
| external serial clocks installed. |
| |
| Signed-off-by: Yuri Tikhonov <yur@emcraft.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Mon Aug 6 18:18:34 2007 -0500 |
| |
| mpc83xx: fix ITX[GP] O=builddir builds |
| |
| make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop. |
| |
| Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or |
| "BUILD_DIR=<some dir> ./MAKEALL ..." |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Aug 1 15:00:59 2007 +0800 |
| |
| mpc83xx: Correct the README for DDR ECC |
| |
| Update the README for DDR ECC, change the name |
| to README.mpc83xx.ddrecc. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Aug 1 15:00:15 2007 +0800 |
| |
| mpc83xx: Consolidate the ECC support of 83xx |
| |
| Remove the duplicated source code of ecc command on the <board>.c, |
| for reused, move these code to cpu/mpc83xx directory. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 036575c544cf1b69654d8fb334bda69c6ff3da36 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Sat Aug 4 13:37:39 2007 +0800 |
| |
| mpc83xx: Correct the burst length for DDR2 with 32 bits |
| |
| The burst length should be 4 for DDR2 with 32 bits bus |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Jul 25 19:25:33 2007 -0500 |
| |
| mpc83xx: add support for the MPC8323E RDB |
| |
| MPC8323E based board with 64MB fixed SDRAM, 16MB flash, |
| five 10/100 ethernet ports connected via an ICPlus IP175C |
| switch, one PCI slot, and serial. Features not supported |
| in this patch are SD card interface, 2 USB ports, and the |
| two phone ports. |
| |
| Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Jul 25 19:25:28 2007 -0500 |
| |
| mpc83xx: fixup generic pci for libfdt |
| |
| add libfdt support to the generic 83xx pci code |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit f57ac7a7b37109245b69db80839ebee26179966a |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Jul 25 19:25:22 2007 -0500 |
| |
| mpc83xx: fix 8360 and cpu functions to update fdt being passed |
| |
| ..and not the global fdt. Rename local fdt vars to blob so as not to |
| be confused with the global var with the same three-letter name. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 8be404459a6b7395415a57bb35e8377e3b2b5acb |
| Author: Jerry Van Baren <gvb.uboot@gmail.com> |
| Date: Wed Jul 4 21:34:24 2007 -0400 |
| |
| mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled |
| |
| Several node strings were not correct (trailing slashes and properties |
| in the strings) |
| Added setting of the timebase-frequency. |
| Improved error messages and use debug() instead of printf(). |
| |
| Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 26d02c9bbac1751c5e19294f000100b48d43a920 |
| Author: Jerry Van Baren <gvb.uboot@gmail.com> |
| Date: Wed Jul 4 21:27:30 2007 -0400 |
| |
| mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path(). |
| |
| The new name matches more closely the kernel's name, which is also |
| a much better description. |
| |
| These are the mpc83xx changes made necessary by the function name change. |
| |
| Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> |
| Acked-by: Gerald Van Baren <vanbaren@cideas.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 9be39a67c9f8fef7107f5df09d673005f04d0963 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Mon Jun 25 10:41:56 2007 +0800 |
| |
| mpc83xx: Add support for the display of reset status |
| |
| 83xx processor family has many reset sources, such as |
| power on reset, software hard reset, software soft reset, |
| JTAG, bus monitor, software watchdog, check stop reset, |
| external hard reset, external software reset. |
| sometimes, to figure out the fault of system, we need to |
| know the cause of reset early before the prompt of |
| u-boot present. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Mon Jun 25 10:41:04 2007 +0800 |
| |
| mpc83xx: Fix the align bug of SDMA buffer |
| |
| According to the latest user manual, the SDMA temporary |
| buffer base address must be 4KB aligned. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Mon Jun 25 13:21:12 2007 +0800 |
| |
| mpc83xx: Revise the MPC8360EMDS readme doc |
| |
| When the rev2.x silicon mount on the MPC8360EMDS baord, |
| and if you are using the u-boot version after the commit |
| 3fc0bd159103b536e1c54c6f4457a09b3aba66ca. |
| to make the ethernet interface usable, we have to setup |
| the jumpers correctly. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Jul 3 13:46:32 2007 -0500 |
| |
| FSL I2C driver programs the two I2C busses differently |
| |
| The i2c_init() function in fsl_i2c.c programs the two I2C busses differently. |
| The second I2C bus has its slave address programmed incorrectly and is |
| missing a 5-us delay. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit df33f6b4d6d63693dd9200808b242de1b86cb8e8 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Jul 3 13:04:34 2007 -0500 |
| |
| Update SCCR programming in cpu_init_f() to support all 83xx processors |
| |
| Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the |
| bitfields for all 83xx processors. The code to update some bitfields was |
| compiled only on some processors. Now, the bitfields are programmed as long |
| as the corresponding CFG_SCCR option is defined in the board header file. |
| This means that the board header file should not define any CFG_SCCR macros |
| for bitfields that don't exist on that processor, otherwise the SCCR will be |
| programmed incorrectly. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 9546266999f0b9b51372636614211b88d90f0f25 |
| Author: Martin Krause <martin.krause@tqs.de> |
| Date: Fri Jun 22 13:04:22 2007 +0200 |
| |
| TQM834x: cleanup configuraton |
| |
| Remove irritating #undef DEBUG |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc |
| Author: david.saada <David.Saada@ecitele.com> |
| Date: Mon Jun 18 09:09:53 2007 -0700 |
| |
| MPC83xx: Fix makefile to generate config.h file in the build directory |
| |
| MPC83xx: Fix the Makefile config sections to generate the include/config.h |
| file in the build directory instead of the source directory. |
| |
| Signed-off-by: David Saada <david.saada@ecitele.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 1ded0242e437259366792d52b7e9d1e1931d8fa5 |
| Author: Lee Nipper <Lee.Nipper@freescale.com> |
| Date: Thu Jun 14 20:07:33 2007 -0500 |
| |
| mpc83xx: Add support for 8360 silicon revision 2.1 |
| |
| This change adds 8360 silicon revision 2.1 support to u-boot. |
| |
| Signed-off-by: Lee Nipper <lee.nipper@freescale.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Wed Aug 8 04:14:28 2007 -0500 |
| |
| Treat ppc64 host as ppc |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 0dc4279b08ff82472bec2e2c90858602459febe8 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Wed Aug 8 09:01:46 2007 +0800 |
| |
| Minor fix for bios emulator makefile |
| |
| Add $(obj) to LIB avoiding objects be built in the source dir |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Wed Aug 8 08:33:11 2007 +0800 |
| |
| Add CONFIG_BIOSEMU define to guard all the bios emulator code |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| This patch fix the compile issue on the board that did not enable the bios emulator |
| |
| commit ed8106433522f2ea8933e9808346860d061d7731 |
| Author: Zach Sadecki <Zach.Sadecki@ripcode.com> |
| Date: Tue Jul 31 12:27:25 2007 -0500 |
| |
| tsec: fix multiple PHY support |
| |
| The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx" |
| broke multiple PHY support in tsec.c. This fixes it. |
| |
| Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede |
| Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Date: Thu Aug 9 09:08:18 2007 -0500 |
| |
| tsec: Allow Ten Bit Interface address to be configurable |
| |
| Allow the address of the Ten Bit Interface (TBI) to be changed in the |
| event of a conflict with another device. |
| |
| Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| |
| commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Aug 8 09:54:26 2007 +0200 |
| |
| Coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a41de1f0d373e09c782dea558385a06247111ba5 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Aug 5 05:15:18 2007 -0500 |
| |
| Port enabled for I2C signals and chipselects port configuration. |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Aug 5 04:31:18 2007 -0500 |
| |
| Added NAND support |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit eaf9e447beb3e498818ef8ad0b8c1597cd506149 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Aug 5 04:11:20 2007 -0500 |
| |
| Added I2C support |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 99c03c175d2689093176facf17c58ce2cb320001 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Aug 5 03:58:52 2007 -0500 |
| |
| Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Aug 5 03:55:21 2007 -0500 |
| |
| Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf() |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Aug 5 03:43:30 2007 -0500 |
| |
| Moved sync() from board file to include/asm-m68k/io.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Aug 5 03:30:44 2007 -0500 |
| |
| Declared attributes of void __mii_init(void) as an alias for int mii_init(void) |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 9998bd37ead85e93953559720710d3b0685c81e6 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Sun Aug 5 03:19:10 2007 -0500 |
| |
| Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Tue Aug 7 16:17:06 2007 +0800 |
| |
| Add CONFIG_BIOSEMU define to guard all the bios emulator code |
| |
| This patch fix the compile issue on the board that did not enable the bios emulator |
| |
| commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Aug 7 16:02:13 2007 +0200 |
| |
| Fix missing brace error in fs/fat/fat.c |
| [pointed out by Roderik Wildenburg] |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 706714d97a0d08d59eda4de2268c39f504688329 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Aug 6 23:41:53 2007 +0200 |
| |
| [FIX] remove cute code |
| |
| commit f500d9fdeb576288656dac427052ad2c5ca0ad1a |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Aug 6 23:35:26 2007 +0200 |
| |
| [FIX] Fix romfs code |
| |
| commit ab4b956d3143f8f8174089053f5dfabbb04762b0 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Aug 6 23:31:49 2007 +0200 |
| |
| [FIX] Coding style cleanup - Wolfgang's suggestions |
| |
| commit 6c33c78557ca6f8da68c01ce33e278695197d3f4 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Aug 6 23:21:05 2007 +0200 |
| |
| Fixed typo in README (pointed out by Martin Jost). |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 537223afa61f64480df31ce440a9cb386df4a814 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Aug 6 21:10:17 2007 +0200 |
| |
| ppc4xx: Update AMCC Bamboo README doc/README.bamboo |
| |
| As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>, |
| here an updated Bamboo README. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9c7e4b06214db61bb21f1bcbe57c97519669baae |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Aug 6 02:17:36 2007 +0200 |
| |
| Coding style cleanup. Update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 221838cc7eb178370ff62aa05920a582e12ac322 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Tue Jul 10 09:03:22 2007 +0800 |
| |
| Remove the bios emulator from MAI board. |
| |
| The bios emulator in the MAI board can not pass compile |
| and have a lot of crap in it. remove it and will have a |
| clean and small bios emulator in the drivers directory |
| which can be uesed for every board. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 5618332409bb96f4448d1712899369fc80c0b489 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Jul 13 12:14:59 2007 +0800 |
| |
| Fix some compile issues for MAI board. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 0f460a1ee148b648ee242c3157650287d4296260 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Jul 13 12:14:58 2007 +0800 |
| |
| Configurations for ATI video card BIOS emulator |
| |
| This patch add definition of the BIOS emulator and the ATI framebuffer |
| driver for MPC8641HPCN board. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit ece92f85053b8df613edcf05b26a416cbc3d629c |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Jul 6 08:34:56 2007 +0800 |
| |
| This is a BIOS emulator, porting from SciTech for u-boot, mainly for |
| ATI video card BIOS. and can be used for x86 code emulation by some |
| modifications. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 5072188acabde3178fac7f5a597150e6e74fd40c |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Jul 6 08:33:33 2007 +0800 |
| |
| This is a framebuffer driver for ATI video card, can work for PCI9200, |
| X300, X700, X800 ATI video cards. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 5728be389e65fd47f34b33c2596271eb4db751ae |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Aug 6 01:01:49 2007 +0200 |
| |
| Coding style cleanup. Update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 8092fef4c29b395958bb649647da7e3775731517 |
| Author: Martin Krause <Martin.Krause@tqs.de> |
| Date: Tue Dec 12 14:26:01 2006 +0100 |
| |
| Add functions to list of exported functions |
| |
| Additionally export the following fuctions (to make trab_config build again): |
| - simple_strtol() |
| - strcmp() |
| |
| Also bump the ABI version to reflect this change |
| |
| Signed-off-by: Martin Krause <martin.krause@tqs.de> |
| |
| commit 63cec5814fab5d2b1c86982327433807a5ac0249 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Thu Aug 2 14:09:49 2007 -0500 |
| |
| Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts. |
| |
| All of the PCI/PCI-Express driver and initialization code that |
| was in the MPC8641HPCN port has now been moved into the common |
| drivers/fsl_pci_init.c. In a subsequent patch, this will be |
| utilized by the 85xx ports as well. |
| |
| Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added. |
| |
| Also enable the second PCI-Express controller on 8641 |
| by getting its BATS and CFG_ setup right. |
| |
| Fixed a u16 vendor compiler warning in AHCI driver too. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a274ca4f6d68830e7c916f897561cff8c4101c38 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Aug 5 22:33:05 2007 +0200 |
| |
| [FIX] Coding style cleanup |
| |
| commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Aug 5 16:13:31 2007 +0200 |
| |
| [FIX] Xilinx Uartlite driver |
| Because PPC405 can use UARTLITE serial interface and |
| Microblaze can use Uart16550 serial interface not only Uartlite. |
| |
| commit 98889edd50aadf862071eb5664747ad0d568a20e |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Aug 5 15:54:53 2007 +0200 |
| |
| [FIX] Change configuration for XUPV2P Microblaze board |
| |
| commit 537091b4eed9302865d03fef3f7212b4fe5cf28f |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Aug 5 15:53:50 2007 +0200 |
| |
| [PATCH] Added support for Xilinx Emac community driver |
| |
| commit 86b116b1b1e165ca4840daefed36d2e3b8460173 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Aug 3 12:08:16 2007 +0200 |
| |
| cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family. |
| |
| Add the ability for modules from the Schindler cm5200 family to use a |
| single U-Boot image: |
| - rename cm1_qp1 to cm5200 |
| - add run-time module detection |
| - parametrize SDRAM configuration according to the module we are running on |
| |
| Few minor, board-specific fixes included in this patch: |
| - better MAC address handling |
| - updated default environment ('update' command uses +{filesize} now) |
| - improved error messages in the auto-update code |
| - allow booting U-Boot from RAM (CFG_RAMBOOT) |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Fri Aug 3 04:05:25 2007 -0500 |
| |
| Add Marvell 1149 PHY support to the TSEC |
| |
| commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Aug 2 21:27:46 2007 +0200 |
| |
| Coding style cleanup, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 63e22764d2f8653f68888c667eb65b3996b52680 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Aug 2 10:11:18 2007 +0200 |
| |
| Minor cleanup of <board>_nand build rules. |
| |
| commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Aug 2 08:33:56 2007 +0200 |
| |
| ppc4xx: Code cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit c92409812206ac67a7fa7aae298539a9c3804a46 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Tue Jul 31 18:51:48 2007 +0200 |
| |
| [ppc440SPe] Graceful recovery from machine check during PCIe configuration |
| |
| During config transactions on the PCIe bus an attempt to scan for a |
| non-existent device can lead to a machine check exception with certain |
| peripheral devices. In order to avoid crashing in such scenarios the |
| instrumented versions of the config cycle read routines are introduced, so |
| the exceptions fixups framework can gracefully recover. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| Acked-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit dec99558b9ea75a37940d07f41a3565a50b54ad1 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Tue Jul 31 18:19:54 2007 +0200 |
| |
| [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A |
| |
| This brings back separate settings for PCIe bus numbers depending on chip |
| revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa |
| commit. 440SPe rev. A does NOT work properly with the same settings as for |
| the rev. B (no devices are seen on the bus during enumeration). |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Aug 2 00:48:45 2007 +0200 |
| |
| Fix build errors and warnings / code cleanup. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68 |
| Author: Eugene OBrien <eugene.obrien@advantechamt.com> |
| Date: Tue Jul 31 10:24:56 2007 +0200 |
| |
| ppc4xx: Update AMCC Bamboo 440EP support |
| |
| Changed storage type of cfg_simulate_spd_eeprom to const |
| Changed storage type of gpio_tab to stack storage |
| (Cannot access global data declarations in .bss until afer code relocation) |
| |
| Improved SDRAM tests to catch problems where data is not uniquely addressable |
| (e.g. incorrectly programmed SDRAM row or columns) |
| |
| Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules |
| Fixed AM29LV320DT (OpCode Flash) sector map |
| |
| Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jul 31 08:37:01 2007 +0200 |
| |
| ppc4xx: Update 440EPx lwmon5 board support |
| |
| - Clear ECC status regs after ECC POST test |
| - Set dcbz for ECC generation with caches enabled as default |
| - Code cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jul 30 11:04:57 2007 +0200 |
| |
| ppc4xx: Only print ECC related info when the error bis are set |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e36220a4baf1f188ba60f17e9d0f043069b1362a |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Fri Jul 27 16:44:31 2007 +0200 |
| |
| new FPGA image for PLU405 board |
| |
| new FPGA image for PLU405 board with improved CompactFlash timing |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Fri Jul 27 14:43:59 2007 +0200 |
| |
| [ADS5121] Support for the ADS5121 board |
| |
| The following MPC5121e subsystems are supported: |
| |
| - low-level CPU init |
| - NOR Boot Flash (common CFI driver) |
| - DDR SDRAM |
| - FEC |
| - I2C |
| - Watchdog |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| Signed-off-by: Jan Wrobel <wrr@semihalf.com> |
| |
| commit 1863cfb7b100ba0ee3401799457a01dc058745f8 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Fri Jul 27 14:22:04 2007 +0200 |
| |
| [PPC] Remove unused MSR_USER definition |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit d4024bb72dd81695ec099b2199eda0d27c623e62 |
| Author: John Otken <john@softadvances.com> |
| Date: Thu Jul 26 17:49:11 2007 +0200 |
| |
| ppc4xx: Add support for AMCC 405EP Taihu board |
| |
| Signed-off-by: John Otken <john@softadvances.com> |
| |
| commit b66091de6c7390620312c2501db23d8391e7cabb |
| Author: Anatolij Gustschin <agust@denx.de> |
| Date: Thu Jul 26 15:08:01 2007 +0200 |
| |
| ppc4xx: lwmon5: Update Lime initialization |
| |
| Change Lime SDRAM initialization to now support 100MHz and |
| 133MHz (if enabled). Also the framebuffer is initialized to |
| display a blue rectangle with a white border. |
| |
| Signed-off-by: Anatolij Gustschin <agust@denx.de> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9f24a808f17fc0f37b7fb4805f734741335caecc |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jul 24 09:52:52 2007 +0200 |
| |
| ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added |
| |
| The used Intel NOR FLASH chips have internally two dies, and are now |
| treated as two seperate chips. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit aedf5bde179ecfbd0a96130d18996a96518b785f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jul 24 07:20:09 2007 +0200 |
| |
| ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...) |
| |
| As suggested by Hakan Eryigit, here an updated setup for the lwmon5 |
| interrupt controller. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a71d96eac8130b53a91f93cd10c70fca0db18d52 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jul 20 15:03:44 2007 +0200 |
| |
| ppc4xx: Fix bug with default GPIO output value |
| |
| As spotted by Matthias Fuchs, the default output values for all GPIO1 |
| outputs were not setup correctly. This patch fixes this issue. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 531e3e8b831f357056448fa573137d5fb37000fd |
| Author: Pavel Kolesnikov <concord@emcraft.com> |
| Date: Fri Jul 20 15:03:03 2007 +0200 |
| |
| POST: Add ECC POST for the lwmon5 board |
| |
| This patch adds ECC Post test for the Lwmon5 board based |
| on PPC440EPx to U-Boot. |
| |
| Signed-off-by: Pavel Kolesnikov <concord@emcraft.com> |
| Acked-by: Yuri Tikhonov <yur@emcraft.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit cc3023b9f95d7ac959a764471a65001062aecf41 |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Thu Jul 19 17:12:28 2007 +0200 |
| |
| Fix breakage of 8xx boards from recent commit. |
| |
| This patch fixes the negative consequences for 8xx of the recent |
| "ppc4xx: Clean up 440 exceptions handling" commit. |
| |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| |
| commit c883f6ea32dce91f07670b3aafecf6c99b1e5341 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jul 16 13:11:12 2007 +0200 |
| |
| Coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jul 16 10:02:12 2007 +0200 |
| |
| ppc4xx: Code cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jul 16 10:01:38 2007 +0200 |
| |
| ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jul 16 10:00:43 2007 +0200 |
| |
| ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c |
| |
| The new boardspecific DDR2 controller configuration is used for the Yucca |
| board. Now the Yucca board with 440SPe Rev. A chips is also supported. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jul 16 09:57:00 2007 +0200 |
| |
| ppc4xx: Add new weak functions to support boardspecific DDR2 configuration |
| |
| The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better |
| support non default, boardspecific DDR(2) controller configuration. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5743a9207a370b90f09b20ebd61167c806b937f3 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jul 16 08:53:51 2007 +0200 |
| |
| ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup |
| |
| The new function remove_tlb() can be used to remove the TLB's used to |
| map a specific memory region. This is especially useful for the DDR(2) |
| setup routines which configure the SDRAM area temporarily as a cached |
| area (for speedup on auto-calibration and ECC generation) and later |
| need this area uncached for normal usage. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon Jul 16 00:31:07 2007 +0200 |
| |
| [PATCH] Support for Xilinx EmacLite controller |
| |
| commit 3a6cab844cf74f76639d795e0be8717e02c86af7 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Jul 14 22:51:02 2007 +0200 |
| |
| Update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat Jul 14 13:11:28 2007 +0200 |
| |
| [FIX] support for simply measuring time |
| |
| commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat Jul 14 12:41:23 2007 +0200 |
| |
| [FS] Added support for ROMFS |
| |
| commit 011595307731a7a67a7445d107c279d031e8ab97 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Sat Jul 14 01:06:58 2007 +0200 |
| |
| [PCS440EP] - fix compile error, if BUILD_DIR is used |
| |
| commit 5a2f1098d81ad58b309e5e558d0492643166a799 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat Jul 14 00:18:48 2007 +0200 |
| |
| [PATCH] Support time without timer |
| |
| commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Jul 13 21:43:55 2007 +0200 |
| |
| [PATCH] Remove problem with disabled BARREL SHIFTER |
| |
| commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Jul 13 21:41:44 2007 +0200 |
| |
| [FIX] correct help for rspr |
| |
| commit fad63407154f46246ce80d53a9c669a44362ac67 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Fri Jul 13 09:54:17 2007 +0200 |
| |
| make show_boot_progress () weak. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 907902472391b6ca1876ec300687562ecaf459b1 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Fri Jul 13 08:26:05 2007 +0200 |
| |
| [PCS440EP] - The DIAG LEDs are now blinking, if an error occur |
| - fix compile error, if BUILD_DIR is used |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jul 12 16:32:08 2007 +0200 |
| |
| ppc4xx: Change receive buffer handling in the 4xx emac driver |
| |
| This change fixes a bug in the receive buffer handling, that |
| could lead to problems upon high network traffic (broadcasts...). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Jul 12 01:45:34 2007 +0200 |
| |
| Update CHANGELOG, minor coding style cleanup. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Fri Jun 8 16:41:18 2007 -0500 |
| |
| Remove erroneous errata code from Marvel 88E1111S driver |
| |
| The Marvel 88E1111S driver for the TSEC was copied from the |
| 88E1101 driver, and included a fix for an erratum which does not |
| exist on that part. Now it is removed |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 982efcf23fd03647e01e2fbe28a7a36239156cc0 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue Jun 5 16:38:44 2007 -0500 |
| |
| From: eran liberty <eran.liberty@gmail.com> |
| |
| adds the reset register to 85xx immap |
| |
| Signed-off-by: Eran Liberty <eran.liberty@gmail.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Thu May 10 17:50:01 2007 -0500 |
| |
| Polished the 85xx ADS config files |
| |
| Made the boot commands use device trees by default. |
| Also moved the ramdisk to 1000000 (I think the previous address |
| was getting overridden during boot). |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed May 9 11:03:32 2007 -0500 |
| |
| 8544ds: Fix Makefile after moving pixis to board/freescale. |
| |
| The OBJTREE != SRCTREE build scenario was broken. |
| This fixes it. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed May 9 00:54:20 2007 -0500 |
| |
| tsec: Fix PHY code to match first driver |
| |
| Jarrold Wen noticed that the generic PHY code always matches |
| under the current implementation. Change it so the first match |
| wins, and *only* unknown PHYs trigger the generic driver |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit ccc091aac61a38cd998d575d92f7232e256d6312 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue May 8 17:27:43 2007 -0500 |
| |
| Add support for CPM device tree configuration to 8560 ADS |
| |
| * Adds code to modify CPM frequencies |
| * Cleans up the config file to #define TSEC and (for now) #undef FCC |
| * Adds the MII command for all 8560 ADS configurations |
| * Updates config file to provide convenience commands for booting |
| with a device tree |
| |
| Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Tue May 8 17:23:02 2007 -0500 |
| |
| Fix Marvell 88e1145 PHY init code |
| |
| Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver |
| where the reset was being done after the errata code instead of |
| before. |
| |
| Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 5dc210dec5bace98a50b6ba905347890091a9bb0 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Jul 11 14:52:16 2007 -0500 |
| |
| Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit e8b85f3ba4cd8930e0a2fea2100c815d64201765 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Jul 11 14:52:08 2007 -0500 |
| |
| pciauto setup bridge |
| |
| The P2P bridge bus numbers programmed into the device are relative to |
| hose->first_busno. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 571f49fa717004ca4268b4e24057efc7bf9f987b |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Jul 11 14:52:01 2007 -0500 |
| |
| Support PCIe extended config registers |
| |
| FSL PCIe block has extended cfg registers in the 100 and 400 range. |
| For example, to read the LTSSM register: pci display <busn>.0 404 1 |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit ba5feb12581bb2912ce301e4866b71f846e9fc07 |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Jul 11 14:51:48 2007 -0500 |
| |
| Minor improvements to drivers/pci_auto.c |
| |
| - Make pciauto_{pre,post}scan_setup_bridge non-static |
| - Added physical address display in debug messages. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 40e81addab7bb74d20ddf681ce9babc880a828ee |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Jul 11 14:51:35 2007 -0500 |
| |
| Start pci hose scan from hose->current_busno. |
| |
| Ensure hose->current_busno is not less than first_busno. This fixes |
| broken board code which leaves current_busno=0 when first_busno is |
| greater than 0 for the cases with multiple controllers. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 3865b1fb7843a08ad49a6319a36415752276ff48 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jul 11 12:13:53 2007 +0200 |
| |
| Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit fa1df308926a6f70e3504c57514ef27ac31fd13a |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Jul 11 20:11:07 2007 +0200 |
| |
| CM1.QP1: Support for the Schindler CM1.QP1 board. |
| |
| Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 96e1d75be8193ca79e4215a368bf9d7f2362450f |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Wed Jul 11 18:39:11 2007 +0200 |
| |
| [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed |
| - now the Flash ST M29W040B is supported (not tested) |
| - fix the "led" command |
| - fix compile error, if BUILD_DIR is used |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sun Jul 8 13:44:27 2007 +0200 |
| |
| Fix malloc problem introduced with the relocation fixup for the PPC platform |
| |
| The relocation fixup didn't handle the malloc pointer initialization |
| correctly. This patch fixes this problem. Tested successfully on 4xx. |
| The relocation fixup patches for 4xx will follow soon. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0dca874db62718e41253659e60f3a1de7eb418ce |
| Author: TsiChung <tcliew@Goku.(none)> |
| Date: Tue Jul 10 15:45:43 2007 -0500 |
| |
| Cache update and added CFG_UNIFY_CACHE |
| |
| Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only. |
| |
| Signed-off-by: TsiChung <tcliew@Goku.(none)> |
| |
| commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:36:16 2007 -0500 |
| |
| Update header file. Include dtimer_intr_setup(). Changed timer divider to global define. |
| |
| Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:31:25 2007 -0500 |
| |
| Update header files |
| |
| Include immap.h and renamed mcfrtc.h to rtc.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 2870e98ac8e5553e9187b12a47e5f46babb53990 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:29:21 2007 -0500 |
| |
| Add mcffec_initialize() |
| |
| Added mcffec_initialize() in eth_initialize() |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:27:40 2007 -0500 |
| |
| Update header file and clean up |
| |
| Include immap.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 0cee9c66318602c856a899ae5fa7579ccba6443a |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:23:15 2007 -0500 |
| |
| New uart structure and defines |
| |
| Seperated from mcfuart.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit a90e79de8d99e9c9d69d60bfff9f24c337165900 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:22:31 2007 -0500 |
| |
| New timer structure and defines |
| |
| Seperated from mcftimer.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit e04acb2eba4782489417240eff76e20e176aec10 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:21:09 2007 -0500 |
| |
| Rename mcfrtc to rtc |
| |
| Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:17:36 2007 -0500 |
| |
| Rename mcfserial.c. Update include header |
| |
| Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:13:58 2007 -0500 |
| |
| Header file update, clean up and cache handling |
| |
| Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid. |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:10:40 2007 -0500 |
| |
| Create interrupts.c and modify Makefile |
| |
| interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit ddd104f1ed655eda50c06ba636237a83ed943f34 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:06:55 2007 -0500 |
| |
| Enable Icache |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit b9bf3de377b2bae70c983c9b97feae914999e735 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:05:31 2007 -0500 |
| |
| Update header file and some clean up |
| |
| Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces. |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 84a015b52ec820a5ae173717d78516de731c89c2 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:03:28 2007 -0500 |
| |
| Update header file and enable icache |
| |
| Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r(). |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 7a17e759c7a8b58e910daf54df611e94fc8ca074 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 23:01:22 2007 -0500 |
| |
| Update header file and removed interrupt_init() |
| |
| Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 3b635492c95bd0d6e08f93f699821cba1f602a64 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:57:46 2007 -0500 |
| |
| Update for flash.o and mii.o |
| |
| Removed flash.o and added mii.o |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit c5ded275d839e4ff79f41718d50a835d989f57bc |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:56:19 2007 -0500 |
| |
| MII functions calls. |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 427c814104560e29bda14955c67703245aaaa5b4 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:54:42 2007 -0500 |
| |
| Removed MII functions and replaced immap_5329.h and m5329.h with immap.h. |
| |
| The removed MII routines will be placed in mii.c. |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:51:05 2007 -0500 |
| |
| Duplicate code |
| |
| There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file. |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 2744354a8437b8f78db178e30660215688bff570 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:46:38 2007 -0500 |
| |
| Seperate old structure defines and new structure defines |
| |
| Removed new uart structure and defines to uart.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:45:01 2007 -0500 |
| |
| Seperate old structure defines and new structure defines |
| |
| New timer structure and defines will move to new timer.h |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:42:23 2007 -0500 |
| |
| Clean up |
| |
| Removed whitespace |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2 |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:41:24 2007 -0500 |
| |
| Clean up |
| |
| Replaced whitespace with tabs |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:39:07 2007 -0500 |
| |
| Create new header file and move peripherals base address from configs file to new header file. |
| |
| Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h. |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit be296e31c4411f96d9cb3d2afc8fcb006867abfa |
| Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| Date: Thu Jul 5 22:24:58 2007 -0500 |
| |
| Revert file mode |
| |
| Changed MAKEALL file mode to executable, removed executable file mode from Makefile |
| |
| Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> |
| |
| commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 11:19:50 2007 -0500 |
| |
| disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols. |
| |
| Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| Those always evaluated TRUE, and thus were always compiled |
| even when IDE really wasn't defined/wanted. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ddb5d86f0215bcb6c293510c50eb050e92883b7a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 11:13:21 2007 -0500 |
| |
| drivers/: Remove lingering references to CFG_CMD_* symbols. |
| |
| Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| Those always evaluated TRUE, and thus were always compiled |
| even when IDE really wasn't defined/wanted. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit f40a7f3e3888b42a43674b099e5470022c8c544c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 11:07:56 2007 -0500 |
| |
| fs/: Remove lingering references to CFG_CMD_* symbols. |
| |
| Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| Those always evaluated TRUE, and thus were always compiled |
| even when IDE really wasn't defined/wanted. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 11:05:02 2007 -0500 |
| |
| net/: Remove lingering references to CFG_CMD_* symbols. |
| |
| Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| Those always evaluated TRUE, and thus were always compiled |
| even when IDE really wasn't defined/wanted. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 902531788376046da212afd1661cffb62f3daa1c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 11:02:44 2007 -0500 |
| |
| common/: Remove lingering references to CFG_CMD_* symbols. |
| |
| Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| Those always evaluated TRUE, and thus were always compiled |
| even when IDE really wasn't defined/wanted. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit d39b57415838c73fb0a37eca84de3c68ba990586 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 10:48:22 2007 -0500 |
| |
| board/[j-z]*: Remove lingering references to CFG_CMD_* symbols. |
| |
| Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| Those always evaluated TRUE, and thus were always compiled |
| even when IDE really wasn't defined/wanted. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 77a318545d57aefa844752465b94c7e09a3f26d0 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 10:39:10 2007 -0500 |
| |
| board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols. |
| |
| Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. |
| Those always evaluated TRUE, and thus were always compiled |
| even when IDE really wasn't defined/wanted. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 10:27:39 2007 -0500 |
| |
| cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 079a136c3588814784561d6e4856970ee82d6e2a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 10:12:10 2007 -0500 |
| |
| include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*. |
| |
| Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h |
| used to be included but CONFIG_BOOTP_MASK was not defined. |
| |
| Remove lingering references to CFG_CMD_* symbols. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 09:38:02 2007 -0500 |
| |
| include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*. |
| |
| Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h |
| used to be included but CONFIG_BOOTP_MASK was not defined. |
| |
| Remove lingering references to CFG_CMD_* symbols. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 80ff4f99b84b64edca3fd10da365ec1493be1c95 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 09:29:01 2007 -0500 |
| |
| include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*. |
| |
| Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h |
| used to be included but CONFIG_BOOTP_MASK was not defined. |
| |
| Remove lingering references to CFG_CMD_* symbols. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 09:22:23 2007 -0500 |
| |
| include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*. |
| |
| Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h |
| used to be included but CONFIG_BOOTP_MASK was not defined. |
| |
| Remove lingering references to CFG_CMD_* symbols. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 659e2f6736232a08acca8785c206e2b4d9cd07d7 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 09:10:49 2007 -0500 |
| |
| include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*. |
| |
| Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h |
| used to be included but CONFIG_BOOTP_MASK was not defined. |
| |
| Remove lingering references to CFG_CMD_* symbols. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Jul 10 09:02:57 2007 -0500 |
| |
| include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*. |
| |
| Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h |
| used to be included but CONFIG_BOOTP_MASK was not defined. |
| |
| Remove lingering references to CFG_CMD_* symbols. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 22:08:34 2007 -0500 |
| |
| Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK! |
| |
| All of the choices for CONFIG_BOOTP_ are now documented in |
| the README file. You must now individually select exactly |
| the set that you want using a series of |
| #define CONFIG_BOOTP_<x> |
| statements in the board port config files now. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit d3b8c1a743dcd31625c99e6a44590f207eb00028 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 21:57:31 2007 -0500 |
| |
| include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 2fd90ce575b02d189cbf443c85309bcd001aa393 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 21:48:26 2007 -0500 |
| |
| include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 37d4bb70586659dedef1658ce1bed071be098aec |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 21:38:02 2007 -0500 |
| |
| include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 18225e8dd1950bd6dbf35011e436db7f474c187d |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 21:31:24 2007 -0500 |
| |
| include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 21:24:19 2007 -0500 |
| |
| include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 21:16:53 2007 -0500 |
| |
| include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 19:12:30 2007 -0500 |
| |
| Retire CONFIG_COMMANDS finally. |
| Strip old CFG_CMD_* symbols out. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b5501f7d720fed99ab0b42c83f5dea52868ce007 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 19:10:03 2007 -0500 |
| |
| Update README.* to reference new CONFIG_CMD_* names now. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 19:06:00 2007 -0500 |
| |
| cpu/m*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:57:22 2007 -0500 |
| |
| cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ab3abcbabd840928fb1eb5122118ca466b5e5013 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:45:16 2007 -0500 |
| |
| board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:38:39 2007 -0500 |
| |
| board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit c508a4cefd8a953fc64957650506a035e6e3d9d1 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:31:28 2007 -0500 |
| |
| board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b9307262f8a9f3b5c9e15a6067eadc17407146f6 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:24:55 2007 -0500 |
| |
| board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit fcec2eb93e126400009729328e797f12bc94f1fd |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:19:09 2007 -0500 |
| |
| board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a593814f2be0c9cdc3133cd550b167b8a988328f |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:10:50 2007 -0500 |
| |
| rtc/: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 67350568f9d46e66c21829f3513b3db0caeb948b |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:05:38 2007 -0500 |
| |
| lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7def6b34f910f08d7ef0a14646da067719237ca2 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 18:02:11 2007 -0500 |
| |
| lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 17:56:50 2007 -0500 |
| |
| fs/: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit c91898bbc505aff3e12a807af88e76da18efb7ee |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 17:46:09 2007 -0500 |
| |
| tools/: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 17:45:14 2007 -0500 |
| |
| net/: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit cb51c0bf88f95a1bca68324b0126f8eed8b43273 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 17:39:42 2007 -0500 |
| |
| drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 17:30:01 2007 -0500 |
| |
| drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 17:22:37 2007 -0500 |
| |
| disk/: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 639221c76c88215bd55af83ad174fc30d1940f8f |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Jul 9 17:15:49 2007 -0500 |
| |
| include/: Remove obsolete references to CONFIG_COMMANDS |
| Mostly removed from comments here. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Jul 10 00:01:28 2007 +0200 |
| |
| Coding style cleanup; update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit c8603cfbd4573379a6076c9c208545ba2bbf019a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jul 9 11:00:24 2007 +0200 |
| |
| Small coding style cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Jul 9 10:10:08 2007 +0200 |
| |
| Migrate esd 405EP boards to new NAND subsystem |
| |
| Remove unused CFG_NAND_LEGACY define |
| |
| These boards to not have NAND. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Jul 9 10:10:06 2007 +0200 |
| |
| Migrate esd 405EP boards to new NAND subsystem |
| |
| Migrate esd 405EP boards to new NAND subsystem |
| |
| -cleanup |
| -use correct io accessors (in/out_be32()) |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit e09f7ab5749c345f924da272bea0521a73af5b11 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Mon Jul 9 10:10:04 2007 +0200 |
| |
| Migrate esd 405EP boards to new NAND subsystem |
| |
| This patch prepares the migration from the legacy NAND driver |
| to U-Boot's new NAND subsystem for esd boards. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit c3517f919d0f61650cf3027fd4faf0f631142f6c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 18:10:08 2007 -0500 |
| |
| common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 18:05:39 2007 -0500 |
| |
| common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit c76fe47425afc7d5d670ff0539823c85d65d9c42 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 18:02:23 2007 -0500 |
| |
| common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit baa26db4113679b80970ff447d91cc10217742a6 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 17:51:39 2007 -0500 |
| |
| common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 17:02:01 2007 -0500 |
| |
| Clear up confusion over the CMD_POST and POST_DIAG mess. |
| |
| For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG |
| when it really means just CONFIG_CMD_DIAG. There is no CMD_POST. |
| Clear this mess up some. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b3631487105a57ab7cbadfc26efbaf9676275018 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 15:45:08 2007 -0500 |
| |
| Remove references to the old cmd_confdefs.h include file. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 15:42:59 2007 -0500 |
| |
| include/configs: Catch some CONFIG_CMD_* conversion stragglers. |
| |
| Use new CONFIG_CMD_* in lwmon5.h board config file. |
| Fix CONFIG_CMD_* typo braindamage in omap1510inn.h |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a5562901661bd428f7e5feb333f796372cb81019 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 15:31:57 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 15:02:44 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various S* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit e9a0f8f15c11f337967aa0600ad6e8af33037f50 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 15:12:40 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various R* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 14:55:07 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various Q* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 14:49:44 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various P* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit e18a1061a8630cb67995fdf99afd3fb50d1b187d |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 14:21:43 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 14:14:17 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various M* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 348f258f24253433e4a2302a0bbceb6740a67246 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 13:46:18 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sun Jul 8 10:09:35 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various H* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 60a0876b5106b34220e459c208bbf648073306c0 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sat Jul 7 21:04:26 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit dcaa71562826a2466e894c868d132509dcda8444 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sat Jul 7 20:56:05 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various E* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 3c3227f3c737502311b25b72084573901cbbf17d |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Sat Jul 7 20:40:43 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various D* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Jul 5 19:52:35 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various C* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit de8b2a6e33298dcdb10bdda48db25e53c3089eba |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Jul 5 19:32:07 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various B* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 498ff9a228485bd4b9f23d066bada268f9add1dd |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Jul 5 19:13:52 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various A* named board config files. |
| |
| Since ADS860.h includes "board/fads/fads.h" with ramifications |
| on the CONFIG_COMMAND treatment, it too has to be adjusted to |
| exclude already configured commands in this same commit. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 10e038932f22ee80ebd53de312531e70e6590a2f |
| Author: Thomas Knobloch <knobloch@siemens.com> |
| Date: Fri Jul 6 14:58:39 2007 +0200 |
| |
| [NAND] Bad block skipping for command nboot |
| |
| The old implementation of command nboot does not support reading the image from |
| NAND flash with skipping of bad blocks. The patch implements a new version of |
| the nboot command: by calling nboot.jffs2 from the u-boot command line the |
| command will load the image from NAND flash with respect to bad blocks (by using |
| nand_read_opts()). This is similar to e.g. the NAND read command: "nand |
| read.jffs2 ...". |
| |
| Signed-off-by: Thomas Knobloch <knobloch@siemens.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jul 6 12:26:51 2007 +0200 |
| |
| ppc4xx: Update lwmon5 default environment |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5d187430a055d62f17ca84d75e7245439d1f7e75 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jul 6 11:48:24 2007 +0200 |
| |
| ppc4xx: Update lwmon5 board |
| |
| Add unlock=yes environment variable to default variables to unlock |
| the CFI flash by default. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jul 6 09:45:47 2007 +0200 |
| |
| Fix problem with get/setdcr commands introduced by cfg patches |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Jul 6 02:50:19 2007 +0200 |
| |
| Code cleanup and default config update for STC GP3 SSA board. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit e4dbe1b215f5c6c462e76909d240bd96472b84de |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Jul 5 17:56:27 2007 +0200 |
| |
| Fixing some typos etc. introduced mainly by cfg patches. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Jul 5 11:12:16 2007 +0200 |
| |
| Minor coding style cleanup. Update CHANGELOG. |
| |
| commit dca3b3d6d6396b67e5e84af53452164923c73443 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:33:46 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:33:38 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:33:30 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various s* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:33:23 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 26a34560d56a9df5bc2ae23525d9229736134757 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:33:17 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various p* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a5cb23092a7d31490a33d4ec871468b63babfa3c |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:33:13 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various o* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 929a2bfd142737003a8fc32e1b86e1f2c1850257 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:33:07 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various n* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 5dc11a511960d490f7f01ffd746edfe6277f99b0 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:33:01 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various m* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:32:57 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various l* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit bc234c129fa04fb9fa33530930e5cbc6084cd47a |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:32:51 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:32:32 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various i* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 48d5d102a2f2e619c92050b9aedbb69689185bc0 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:32:25 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various h* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:32:19 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various g* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:32:10 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various e* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:32:03 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various d* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:31:56 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various c* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:31:49 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various b* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 0b361c916617aff79e647b40f0e43361e0bbaccf |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:31:42 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various a* named board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b730cda82e362df6a22f4c59c0a9b97e885b1014 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:31:35 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in mpc5xx board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit d794cfefead5fc177cf4f41164e80382e9c9484a |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:31:15 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in various 5200 board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:31:07 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in STx board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:30:58 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in sbc* board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 2694690e285acaa34922f55f4b5ae030da60c55a |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:30:50 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in TQM board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1cc4c458329765b58e584a19821e796b3c10e976 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:30:28 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in 82xx board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jul 4 22:30:06 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in 83xx board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b44896215a09c60fa40cae906f7ed207bbc2c492 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Thu Jul 5 08:17:37 2007 +0200 |
| |
| Merged POST framework with the current TOT. |
| |
| Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> |
| |
| commit b24629fa377214d63bb40d1360e354b6d3e4af56 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jun 13 13:23:15 2007 -0500 |
| |
| mpc86xx: Remove old CFG_CMD_* references. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jun 13 13:22:54 2007 -0500 |
| |
| Add MPC8568MDS to MAKEALL 85xx target. |
| |
| It was missing from the original port submission. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 2835e518c969e5124ba1174eef3e8375e12fa7d5 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jun 13 13:22:08 2007 -0500 |
| |
| include/configs: Use new CONFIG_CMD_* in 85xx board config files. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 56b304ac2091689506088a9ae67f63fd6300cf16 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jun 13 13:21:37 2007 -0500 |
| |
| Fix #if typo in CONFIG_CMD_* changes. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit f780b83316d9af1f61d71cc88b1917b387b9b995 |
| Author: Niklaus Giger <niklausgiger@gmx.ch> |
| Date: Wed Jun 27 18:11:38 2007 +0200 |
| |
| resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> |
| |
| commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jul 4 10:06:30 2007 +0200 |
| |
| ppc4xx: Update lwmon5 board |
| |
| - Add optional ECC generation routine to preserve existing |
| RAM values. This is needed for the Linux log-buffer support |
| - Add optional DDR2 setup with CL=4 |
| - GPIO50 not used anymore |
| - Lime register setup added |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6810a34677dbc446334f5e451f1682426dd33b49 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:17:28 2007 -0600 |
| |
| Fix Makefile to use $(MKCONFIG) macro for all board ports |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:17:28 2007 -0600 |
| |
| Fix Makefile to use $(MKCONFIG) macro for all board ports |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 057004f4a4863554d56cc56268bfa7c7d9738e27 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:49 2007 -0600 |
| |
| Correct fixup relocation for mpc83xx |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:44 2007 -0600 |
| |
| Correct fixup relocation for mpc8260 |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f3a52fe05923935db86985daf9438e2f70ac39aa |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:39 2007 -0600 |
| |
| Correct fixup relocation for mpc824x |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:34 2007 -0600 |
| |
| Correct fixup relocation for mpc8220 |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:29 2007 -0600 |
| |
| Correct fixup relocation for MPC5xxx |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 3649cd99ba815b6601868735765602f00ef3692b |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:24 2007 -0600 |
| |
| Correct relocation fixup for mpc5xx |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:19 2007 -0600 |
| |
| Don't set gd->reloc_off if relocation of .fixup works correctly |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:14 2007 -0600 |
| |
| Remove obsolete mpc83xx linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:09 2007 -0600 |
| |
| Consolidate mpc8260 linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:34:04 2007 -0600 |
| |
| Remove obsolete mpc824x linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f94a3aecebc40ca0939c7d66d010009cf51be9e2 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:59 2007 -0600 |
| |
| Remove obsolete mpc824x linker scripts (3 of 4) |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit a71c084f3ac7fedf144537db2b2da47323068833 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:53 2007 -0600 |
| |
| Remove obsolete mpc824x linker scripts (2 of 4) |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f670a15468d1365241d40022b9408e1004181f5e |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:48 2007 -0600 |
| |
| Remove obsolete mpc824x linker scripts (1 of 4) |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 09555bd45a04c0e54f172528d21bc18896550d28 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:43 2007 -0600 |
| |
| Remove obsolete mpc8220 linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 5efb992f046e51225c93d52f80fecbe433abd789 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:38 2007 -0600 |
| |
| Remove obsolete mpc5xxx linker scripts (3 of 3) |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 07c13dfef65b31647e69d8b61daa1eec598add1a |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:33 2007 -0600 |
| |
| Remove obsolete mpc5xxx linker scripts (2 of 3) |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit b4f67513a624ce85866c66c575bd2d9d7977d7f0 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:28 2007 -0600 |
| |
| Remove obsolete mpc5xxx linker scripts (1 of 3) |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit b7d8e05f8675249b5f208aa73babeed384a4519d |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:23 2007 -0600 |
| |
| Remove obsolete mpc5xx linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:18 2007 -0600 |
| |
| Consolidate mpc83xx linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:13 2007 -0600 |
| |
| Consolidate mpc8260 linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:08 2007 -0600 |
| |
| Consolidate mpc824x linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 9c757b789a59a855db57b448dd825329c4e9c4a0 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:33:03 2007 -0600 |
| |
| Consolidate mpc8220 linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit d181c9a15cd41863fe24840d17848429f27d3c8c |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:32:58 2007 -0600 |
| |
| Consolidate mpc5xxx linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 287ac924adb7291bebe5086652a362a30ab28b13 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Jul 3 00:32:53 2007 -0600 |
| |
| Consolidate mpc5xx linker scripts |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jul 4 00:43:53 2007 +0200 |
| |
| Fix a few file permission problems. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jul 4 00:38:38 2007 +0200 |
| |
| Minor coding style cleanup. Rebuild CHANGELOG file. |
| |
| commit 2f9c19e496acb6bb50d9299e1aab377625d48c38 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:44 2007 -0500 |
| |
| configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 602ad3b33d9ceef83dbab46be68646d645d637ee |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:39 2007 -0500 |
| |
| README: Rewrite command line config to use CONFIG_CMD_* names. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 72a074cec68e5bad60d63206c050974e08afd804 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:34 2007 -0500 |
| |
| include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:28 2007 -0500 |
| |
| tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 9107ebe0d352420895ab69b715697bdebc8caf50 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:23 2007 -0500 |
| |
| board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 5e378003d592ea828ec69d6defcd4de79096dd5c |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:19 2007 -0500 |
| |
| board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 737184114ec9c9e0ab94d6713536126073bd2472 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:15 2007 -0500 |
| |
| cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit f48070fe5fe440dfb5ee5268c920de70e48ea327 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:08 2007 -0500 |
| |
| cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:03:03 2007 -0500 |
| |
| lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 73f032021ec5f13cda8faa4e34b6de80960eb86f |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:02:58 2007 -0500 |
| |
| lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 98b79003c21c2578206003256de4e781d6b36ca8 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:02:53 2007 -0500 |
| |
| rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 6e2115acb6a892d53a6881bf253ae41d3df39156 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:02:49 2007 -0500 |
| |
| net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 45cdb9b72c94655c7308b464a2666057c0b286e0 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:02:34 2007 -0500 |
| |
| disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:02:20 2007 -0500 |
| |
| fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit d5be43de93ff905c465e509d45a3164ef48d26e7 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:02:10 2007 -0500 |
| |
| drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b453960d4fdb87b3970d96119b90df2ed024fc4a |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:02:05 2007 -0500 |
| |
| common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:01:54 2007 -0500 |
| |
| common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a76adc8142c1d956385a109e0b70f9319ede4d66 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:01:43 2007 -0500 |
| |
| common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). |
| |
| This is a compatibility step that allows both the older form |
| and the new form to co-exist for a while until the older can |
| be removed entirely. |
| |
| All transformations are of the form: |
| Before: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) |
| After: |
| #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Mon Jun 11 19:01:34 2007 -0500 |
| |
| Introduce initial versions of new Command Config files. |
| |
| Derive three new files from cmd_confdefs.h: |
| config_bootp.h - Has BOOTP related config options, not commands |
| config_cmd_all.h - Has a CONFIG_CMD_* definition for every command |
| config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds. |
| |
| For now, include "config_bootp.h" for compatability until all |
| users of it directly include it properly. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1f2a05898658900dc5717761e27abf2052e67e13 |
| Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in> |
| Date: Sat Jun 30 18:50:48 2007 +0200 |
| |
| Fix S-ATA support. |
| |
| Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in> |
| |
| commit a5d71e290f3673269be8eefb4ec44f53412f9461 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Mon Jun 25 19:11:37 2007 +0200 |
| |
| [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b |
| Author: Niklaus Giger <niklaus.giger@nestal.com> |
| Date: Mon Jun 25 17:03:13 2007 +0200 |
| |
| ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt |
| |
| This patch prints the DDR status registers upon machine check |
| interrupt on the 440EPx/GRx. This can be useful especially when |
| ECC support is enabled. |
| |
| I added some small changes to the original patch from Niklaus to |
| make it compile clean. |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 807018fb7faceb429ce0cb47baa2073746b33a4e |
| Author: Niklaus Giger <niklaus.giger@nestal.com> |
| Date: Mon Jun 25 16:50:55 2007 +0200 |
| |
| ppc4xx: Fix O=buildir builds |
| |
| This patch fixes the problem to assemble cpu/ppc4xx/start.S |
| experienced last week where building failed having specified |
| O=../build.sequoia. |
| |
| Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> |
| |
| commit 466fff1a7bb5fe764a06450626f6098219f446b8 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jun 25 15:57:39 2007 +0200 |
| |
| ppc4xx: Add pci_pre_init() for 405 boards |
| |
| This patch removes the CFG_PCI_PRE_INIT option completely, since |
| it's not needed anymore with the patch from Matthias Fuchs with |
| the "weak" pci_pre_init() implementation. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6f35c53166213c24a5a0e2390ed861136ff73870 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Sun Jun 24 17:41:21 2007 +0200 |
| |
| ppc4xx: Maintenance patch for esd's CPCI405 derivats |
| |
| -add pci_pre_init() for pci interrupt fixup code |
| -disable phy sleep mode via reset_phy() function |
| -use correct io accessors |
| -cleanup |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Sun Jun 24 17:23:41 2007 +0200 |
| |
| ppc4xx: Add pci_pre_init() for 405 boards |
| |
| This patch adds support for calling a plattform dependant |
| pci_pre_init() function for 405 boards. This can be used to |
| move the current pci_405gp_fixup_irq() function into the |
| board code. |
| |
| This patch also makes the CFG_PCI_PRE_INIT define obsolete. |
| A default function with 'weak' attribute is used when |
| a board specific pci_pre_init() is not implemented. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Jun 22 23:59:00 2007 +0200 |
| |
| Coding stylke cleanup; rebuild CHANGELOG |
| |
| commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9 |
| Author: Igor Lisitsin <igor@emcraft.com> |
| Date: Wed Apr 18 14:55:19 2007 +0400 |
| |
| Adapt log buffer code to support Linux 2.6 |
| |
| A new environment variable, "logversion", selects the log buffer |
| behaviour. If it is not set or set to a value other than 2, then the |
| old, Linux 2.4.4, behaviour is selected. |
| |
| Signed-off-by: Igor Lisitsin <igor@emcraft.com> |
| -- |
| |
| commit a11e06965ec91270c51853407ff1261d3c740386 |
| Author: Igor Lisitsin <igor@emcraft.com> |
| Date: Wed Mar 28 19:06:19 2007 +0400 |
| |
| Extend POST support for PPC440 |
| |
| Added memory, CPU, UART, I2C and SPR POST tests for PPC440. |
| |
| Signed-off-by: Igor Lisitsin <igor@emcraft.com> |
| -- |
| |
| commit 566a494f592ae3b3c0785d90d4e1ba45574880c4 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Fri Jun 22 19:11:54 2007 +0200 |
| |
| [PCS440EP] upgrade the PCS440EP board: |
| - Show on the Status LEDs, some States of the board. |
| - Get the MAC addresses from the EEProm |
| - use PREBOOT |
| - use the CF on the board. |
| - check the U-Boot image in the Flash with a SHA1 |
| checksum. |
| - use dynamic TLB entries generation for the SDRAM |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 3a1f5c81b0b9557817a789bece839905581c2205 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 22 16:58:40 2007 +0200 |
| |
| ppc4xx: Fix problem with extended program_tlb() funtion |
| |
| The recently extended program_tlb() function had a problem when |
| multiple TLB's had to be setup (for example with 512MB of SDRAM). The |
| virtual address was not incremented. This patch fixes this issue |
| and is tested on Katmai with 512MB SDRAM. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f |
| Author: Rafal Jaworowski <raj@semihalf.com> |
| Date: Fri Jun 22 14:58:04 2007 +0200 |
| |
| [ppc] Fix build breakage for all non-4xx PowerPC variants. |
| |
| - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros |
| - minor 4xx cleanup |
| |
| commit d677b32855f577ae2690dcd64a172cdd706e0ffc |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Fri Jun 22 10:34:12 2007 +0200 |
| |
| [patch] add nand_init() prototype to nand.h |
| |
| since nand_init() is expected to be called by other parts of u-boot, there |
| should be a prototype for it in nand.h |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jun 20 18:14:24 2007 +0200 |
| |
| Coding style cleanup. Refresh CHANGELOG. |
| |
| commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jun 19 17:22:44 2007 +0200 |
| |
| ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board |
| |
| This patch adds a board command to configure the I2C bootstrap EEPROM |
| values. Right now 533 and 667MHz are supported for booting either via NOR |
| or NAND FLASH. Here the usage: |
| |
| => bootstrap 533 nor ;to configure the board for 533MHz NOR booting |
| => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit df8a24cdd30151505cf57bbee5289e91bf53bd1b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jun 19 16:42:31 2007 +0200 |
| |
| [ppc4xx] Fix problem with NAND booting on AMCC Acadia |
| |
| The latest changes showed a problem with the location of the NAND-SPL |
| image in the OCM and the init-data area (incl. cache). This patch |
| fixes this problem. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 86ba99e34194394052d24c04dc40d1263d29a26f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jun 19 16:40:58 2007 +0200 |
| |
| [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658 |
| Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| Date: Mon Jun 18 13:50:13 2007 -0500 |
| |
| Added M5329AFEE and M5329BFEE Platforms |
| |
| Added board/freescale/m5329evb, cpu/mcf532x, drivers/net, |
| drivers/serial, immap_5329.h, m5329.h, mcfrtc.h, |
| include/configs/M5329EVB.h, lib_m68k/interrupts.c, and |
| rtc/mcfrtc.c |
| |
| Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c, |
| common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h, |
| include/asm-m68k/io.h, include/asm-m68k/mcftimer.h, |
| include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h, |
| include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c, |
| lib_m68k/time.c, net/eth.c and rtc/Makefile |
| |
| Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> |
| |
| commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Jun 17 19:04:11 2007 +0200 |
| |
| [fix] email reparation |
| |
| commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Jun 17 19:03:21 2007 +0200 |
| |
| [FIX] fix microblaze file permitission |
| |
| commit e73846b7cf1e29ae635bf9bb5570269663df2ee5 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 15 11:33:41 2007 +0200 |
| |
| [ppc4xx] Change lwmon5 port to work with recent 440 exception rework |
| |
| Now CONFIG_440 has to be defined in all PPC440 board config files. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit efa35cf12d914d4caba942acd5a6c45f217de302 |
| Author: Grzegorz Bernacki <gjb@semihalf.com> |
| Date: Fri Jun 15 11:19:28 2007 +0200 |
| |
| ppc4xx: Clean up 440 exceptions handling |
| |
| - Introduced dedicated switches for building 440 and 405 images required |
| for 440-specific machine instructions like 'rfmci' etc. |
| |
| - Exception vectors moved to the proper location (_start moved away from |
| the critical exception handler space, which it occupied) |
| |
| - CriticalInput now serviced (with default handler) |
| |
| - MachineCheck properly serviced (added a dedicated handler and return |
| subroutine) |
| |
| - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused, |
| unhandled and those not relevant for 4xx were eliminated) |
| |
| - Eliminated Linux leftovers, removed dead code |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| Signed-off-by: Rafal Jaworowski <raj@semihalf.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 15 08:18:01 2007 +0200 |
| |
| [ppc4xx] Add initial lwmon5 board support |
| |
| This patch adds initial support for the Liebherr lwmon5 board euqipped |
| with an AMCC 440EPx PowerPC. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 85f737376d5ff3d5f0d45a8b657686326d175307 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 15 07:39:43 2007 +0200 |
| |
| [ppc4xx] Extend 44x GPIO setup with default output state |
| |
| The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup |
| is extended with the default GPIO output state (level). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit dbca208518e5e7f01a6420588d1cd6e60db74c2b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jun 14 11:14:32 2007 +0200 |
| |
| [ppc4xx] Extend program_tlb() with virtual & physical addresses |
| |
| Now program_tlb() allows to program a TLB (or multiple) with |
| different virtual and physical addresses. With this change, now one |
| physical region (e.g. SDRAM) can be mapped 2 times, once with caches |
| diabled and once with caches enabled. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88 |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Wed May 23 19:02:41 2007 +0200 |
| |
| Change 'repeatable' attribute of some commands to sensible values. |
| |
| Most prominently this changes 'erase' to be non-repeatable. |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit 5afb202093f6a001797db92cf695b93a70ea9ab4 |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Wed May 23 18:47:48 2007 +0200 |
| |
| Fix 'run' not to continue after interrupted command |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit 9b7464a2c88614e1061f509c48930a3d240d1a35 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Mon Jun 11 15:14:24 2007 +0200 |
| |
| USB: This patch fix readl in ohci swap reg access. |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 8f8416fada9faf94b9a92f21fe6000643cb521d5 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Jun 8 14:52:22 2007 +0200 |
| |
| TQM5200: Add Flat Device Tree support, update default env. accordingly. |
| |
| Signed-off-by: Jan Wrobel <wrr@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 9045f33c023f698660a2e45d1b2194c0711abebc |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Jun 8 10:24:58 2007 +0200 |
| |
| Fix config problems on SC3 board; make ide_reset_timeout work. |
| |
| commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b |
| Author: Benoît Monin <bmonin@adeneo.eu> |
| Date: Fri Jun 8 09:55:24 2007 +0200 |
| |
| [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE |
| |
| Set the correct value in GPIOx_TCR when configuring the gpio |
| with CFG_440_GPIO_TABLE. |
| |
| Signed-off-by: Benoit Monin <bmonin@adeneo.eu> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f539edc076cfe52bff919dd512ba8d7af0e22092 |
| Author: Vadim Bendebury <vbendeb@google.com> |
| Date: Thu May 24 15:52:25 2007 -0700 |
| |
| cosmetic changes to bcm570x driver |
| |
| This is a cosmetic only changes submission. |
| It affects files relevant to bcm570x driver. |
| the commands used to generate this change was |
| |
| cd drivers |
| Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h |
| |
| The BMW target (the only one using this chip so far) builds cleanly, the |
| `before and after' generated object files for drivers/bcm570x.c and |
| drivers/tigon3.o are identical as reported by objdump -d |
| |
| Signed-off-by: Vadim Bendebury <vbendeb@google.com> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Jun 6 16:26:56 2007 +0200 |
| |
| Coding Style cleanup; generate new CHANGELOG file. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Wed Jun 6 11:49:44 2007 +0200 |
| |
| TRAB, USB: update trab board configuration for use of generic ohci driver |
| |
| commit dace45acd1c1357daa9322099d07c9a9e08b0024 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Wed Jun 6 11:49:43 2007 +0200 |
| |
| USB: ohci fixes and cleanup for ppc4xx and yosemite board. |
| |
| commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Wed Jun 6 11:49:43 2007 +0200 |
| |
| USB: ohci fixes and cleanup for mpc5xxx and IceCube board config |
| |
| commit fc43be478f2aa37ce38acd85355038866e4162af |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Wed Jun 6 11:49:35 2007 +0200 |
| |
| USB/OHCI: endianness cleanup in the generic ohci driver |
| |
| commit c440bfe6d6d92d66478a7e84402b31f48413617b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jun 6 11:42:13 2007 +0200 |
| |
| ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board |
| |
| This patch adds NAND booting support for the AMCC Acadia eval board. |
| |
| Please make sure to configure jumper J7 to position 2-3 when booting |
| from NOR, and to position 1-2 when booting for NAND. |
| |
| I also added a board command to configure the I2C bootstrap EEPROM |
| values. Right now only 267MHz is support for booting either via NOR |
| or NAND FLASH. Here the usage: |
| |
| => bootstrap 267 nor ;to configure the board for 267MHz NOR booting |
| => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 18135125f909948b85d1d6881ab4ac0efb4a1c58 |
| Author: Rodolfo Giometti <giometti@linux.it> |
| Date: Wed Jun 6 10:08:14 2007 +0200 |
| |
| Files include/linux/byteorder/{big,little}_endian.h define |
| __BIG_ENDIAN and __LITTLE_ENDIAN. |
| |
| Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| |
| commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82 |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Wed Jun 6 10:08:14 2007 +0200 |
| |
| Add USB PCI-OHCI, USB keyboard and event poll support to the |
| MPC8641HPCN board config file. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit 4dae14ce8fbdf380017dc54f172218e7d2acc889 |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Wed Jun 6 10:08:14 2007 +0200 |
| |
| USB PCI-OHCI, interrupt pipe and usb event poll support |
| |
| This patch added USB PCI-OHCI chips support, interrupt pipe support |
| and usb event poll support. For supporting the USB interrupt pipe, the |
| globe urb_priv is moved to purb in ed struct. Now, we can process |
| several urbs at one time. The interrupt pipe support codes are ported |
| from Linux kernel 2.4. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit fdcfaa1b02268b2899e374b35adf936c911a47eb |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Wed Jun 6 10:08:13 2007 +0200 |
| |
| USB event poll support |
| |
| This patch adds USB event poll support, which could be used in usbkbd |
| and other usb devices driver when the asynchronous interrupt |
| processing is supported. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com |
| |
| commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e |
| Author: Rodolfo Giometti <giometti@linux.it> |
| Date: Wed Jun 6 10:08:12 2007 +0200 |
| |
| ISP116x: delay for crappy USB keys |
| |
| Using some (very) slow USB keys cause the USB host controller buffers |
| are not ready to be read by the CPU so we need an extra delay before |
| reading the USB storage data. |
| |
| Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| |
| commit 09444143670c9c2243cb7aba9f70b3713d33bed1 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Wed Jun 6 10:08:12 2007 +0200 |
| |
| Change duplicate usb_cpu_init_fail to usb_board_init_fail |
| |
| Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing |
| this out. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Tue Jun 5 12:30:52 2007 -0500 |
| |
| mpc8641 image size cleanup |
| |
| e600 does not have a bootpg restriction. |
| Move the version string to beginning of image at fff00000. |
| Resetvec.S is not needed. |
| Update flash copy instructions. |
| Add tftpflash env variable |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit e3cbe1f93c5722f8ebbad468e30c069a2b511097 |
| Author: Benoît Monin <bmonin@adeneo.eu> |
| Date: Mon Jun 4 08:36:05 2007 +0200 |
| |
| [PATCH] Fix ppc4xx bootstrap letter displayed on startup |
| |
| The attached patch is mainly cosmetic, allowing u-boot to |
| display the correct bootstrap option letter according to the |
| datasheets. |
| |
| The original patch was extended with 405EZ support by Stefan |
| Roese. |
| |
| Signed-off-by: Benoit Monin <bmonin@adeneo.eu> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5b1313fb2758ffce8b624457f777d8cc6709608d |
| Author: Nikita V. Youshchenko <yoush@debian.org> |
| Date: Wed May 23 12:45:19 2007 +0400 |
| |
| fix compilation problem for mpc8349itx CFG_RAMBOOT |
| |
| Current include/configs/MPC8349ITX.h does contain some support for building |
| image that will be started from memory (without putting in into flash). |
| It could be triggered by building with TEXT_BASE set to a low value. |
| |
| However, this support is incomplete: using of low TEXT_BASE causes |
| defining configuration macros in inconsistent way, which later leads |
| to compilation errors. In particular. flash support is being disabled, |
| but then flash structures get referenced. |
| |
| This patch fixes this, making it possible to build with low TEXT_BASE. |
| |
| Signed-Off-By: Nikita Youshchenko <yoush@debian.org> |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 8a364f0970de49949d635e60accf463c6443ef8c |
| Author: Nikita V. Youshchenko <yoush@debian.org> |
| Date: Wed May 23 12:45:25 2007 +0400 |
| |
| add missing 'console' var to default mpc8349itx config |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 16:18:17 2007 +0200 |
| |
| ppc4xx: Add missing file for Bamboo NAND booting support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:58:19 2007 +0200 |
| |
| ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz |
| |
| This patch undoes the patch by Jeff Mann with commit-id ada4697d. As |
| suggested by AMCC it is not recommended to dynamically change the EBC |
| speed after bootup. So we undo this change to be on the safe side. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9d9096043e8f713d4bf1743d32e1459e6a11644b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:29:04 2007 +0200 |
| |
| ppc4xx: Update Sequoia NAND booting support with ECC |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit cf959c7d6687567c308e366e9581e1a5aff5cc5b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:27:11 2007 +0200 |
| |
| ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board |
| |
| This patch adds NAND booting support for the AMCC Bamboo eval board. |
| Since the NAND-SPL boot image is limited to 4kbytes, this version |
| only supports the onboard 64MBytes of DDR. The DIMM modules can't be |
| supported, since the setup code for I2C DIMM autodetection and |
| configuration is too big for this NAND bootloader. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 42be56f53c8b107868e6125c8524ae84293e95a7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:23:04 2007 +0200 |
| |
| NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c |
| |
| The U-Boot NAND booting support is now extended to support ECC |
| upon loading of the NAND U-Boot image. |
| |
| Tested on AMCC Sequoia (440EPx) and Bamboo (440EP). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a471db07fbb65a841ffc9f4f112562b945230f98 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:19:29 2007 +0200 |
| |
| ppc4xx: Prepare Bamboo port for NAND booting support |
| |
| This patch updates the "normal" Bamboo NOR booting port, so |
| that it is compatible with the coming soon NAND booting |
| Bamboo port. |
| |
| It also enables the 2nd NAND flash on the Bamboo. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:16:58 2007 +0200 |
| |
| ppc4xx: Update in_be32() functions and friends to latest Linux version |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:15:12 2007 +0200 |
| |
| NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c |
| |
| This patch adds hardware ECC support to the NDFC driver. It also |
| changes the register access from using the "simple" in32/out32 |
| functions to the in_be32/out_be32 functions, which make sure |
| that the access is correctly synced. This is the only recommended |
| access to SoC registers in the current Linux kernel. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 17b5e862287cca76f19dcf8b741e61a7d06617f2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:12:15 2007 +0200 |
| |
| NAND: Update nand_ecc.c to latest Linux version |
| |
| This patch updates the nand_ecc code to the latest Linux version. |
| The main reason for this is the more compact code. This makes |
| it possible to include the ECC code into the NAND bootloader |
| image (NAND_SPL) for PPC4xx. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d2d432760d2199d0e8558fdd9d1789b8131abcf7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 15:09:50 2007 +0200 |
| |
| ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 13:45:24 2007 +0200 |
| |
| ppc4xx: Change Luan config file to support ECC |
| |
| With the updated 44x DDR2 driver the Luan board now supports |
| ECC generation and checking. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7187db73491c8de0fb56efb5e5134ba5ec443089 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jun 1 13:45:00 2007 +0200 |
| |
| ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe) |
| |
| Add config option for 180 degree advance clock control as needed |
| for the AMCC Luan eval board. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ee1529838abbfaa35f14e3ffbeaaba693159475f |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu May 31 17:20:09 2007 +0200 |
| |
| Add support for STX GP3SSA (stxssa) Board with 4 MiB flash. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 7049288fb1f16f1b317140226cdebd07bd416395 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 17:26:46 2007 +0200 |
| |
| Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH. |
| |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 4520fd4d2c450da49637216aa0e53739b61c60ac |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 17:06:36 2007 +0200 |
| |
| Motion-PRO: Add support for redundant environment. |
| |
| Enable redundant environment, add a MTD partition for it; also add env. |
| variable command for passing MTD partitions to the kernel command line. |
| |
| Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit a26eabeec31746f06d309103690892805696e344 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 17:05:11 2007 +0200 |
| |
| Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes. |
| |
| Allow passing longer command line to the kernel - useful especially |
| for passing MTD partition layout. |
| |
| Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 9160b96f71483a116de81c68985e8ee306d36764 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 17:04:18 2007 +0200 |
| |
| Fix: Add missing NULL termination in strings expanded by macros parser. |
| |
| Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 630ec84aef7228fc1dbfb38dec78541403a786cd |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 17:03:37 2007 +0200 |
| |
| Motion-PRO: Update EEPROM's page write bits and write delay. |
| |
| Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A |
| have a page write capability of two bytes", and "This device offers fast (1ms) |
| byte write". Add 3ms of extra delay. |
| |
| Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit c00125e07c1ebc125bab40e1e18bceed8be0c162 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 16:58:45 2007 +0200 |
| |
| MPC5XXX, Motion-PRO: Fix PHY initialization problem. |
| |
| After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which |
| networking does not function. This commit switches PHY to TX mode by clearing |
| the FX_SEL bit of Mode Control Register. It also reverses commit |
| 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 16:57:15 2007 +0200 |
| |
| Motion-PRO: Add support for the temperature sensor. |
| |
| Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit c75e639630cc132dc19cd1ecda5922c0db0bfbba |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 16:55:23 2007 +0200 |
| |
| Motion-PRO: Add displaying of CPLD revision information during boot. |
| |
| Signed-off-by: Jan Wrobel <wrr@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit c99512d6bd3973f01ca2fc4896d829b46e68f150 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 16:53:43 2007 +0200 |
| |
| MPC5xxx: Change names of defines related to IPB and PCI clocks. |
| |
| Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining |
| them does not cause PCI or IPB clocks to run at the specified speed. |
| Instead, they configure divisors used to calculate said clocks. This |
| patch renames the defines according to their real function. |
| |
| Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit a11c0b85dc3664bb3c1e781137118730c8f619ab |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sun May 27 16:51:48 2007 +0200 |
| |
| Motion-PRO: Add LED support. |
| |
| Signed-off-by: Jan Wrobel <wrr@semihalf.com> |
| Signed-off-by: Marian Balakowicz <m8@semihalf.com> |
| Acked-by: Bartlomiej Sieka <tur@semihalf.com> |
| |
| commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b |
| Author: Ulf Samuelsson <ulf@atmel.com> |
| Date: Thu May 24 12:12:47 2007 +0200 |
| |
| [PATCH][NAND] Define the Vendor Id for Micron NAND Flash |
| |
| Signed-off-by: Ulf Samuelsson <ulf@atmel.com> |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d756894722c888d09a9fa1df8323753772d3dcce |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu May 24 09:49:00 2007 +0200 |
| |
| ppc4xx: Fix small 405EZ OCM initilization bug in start.S |
| |
| As pointed out by Bruce Adler <bruce.adler@acm.org> this patch |
| fixes a small bug in the 405EZ OCM initialization. Thanks for |
| spotting. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5d4a179013d59a76446462e1eb0a969fba63eb81 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu May 24 08:22:09 2007 +0200 |
| |
| ppc4xx: Update AMCC Acadia support for board revision 1.1 |
| |
| This patch updates the Acadia (405EZ) support for the new 1.1 board |
| revision. It also adds support for NAND FLASH via the 4xx NDFC. |
| |
| Please note that the jumper J7 must be in position 2-3 for this |
| NAND support. Position 1-2 is for NAND booting only. NAND booting |
| support will follow later. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 822d55365bb557e084d0e33625a6dedcc866110b |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed May 23 14:09:46 2007 -0500 |
| |
| Add LIST_86xx MAKEALL target for PowerPC builds. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 9f0077abd69f7a7c756a915b961037302be3e6f2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue May 22 12:48:09 2007 +0200 |
| |
| ppc4xx: Use do { ... } while (0) for CPR & SDR access macros |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6f3dfc139a838b0841c151efe00ad47db2366e79 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue May 22 12:46:10 2007 +0200 |
| |
| ppc4xx: Add 405 support to 4xx NAND driver ndfc.c |
| |
| This patch adds support for 405 PPC's to the 4xx NAND driver |
| ndfc.c. This is in preparation for the new AMCC 405EZ. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 10603d76767426be803dadd4fb688b97eb69481c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon May 21 07:41:22 2007 +0200 |
| |
| ppc4xx: Fix problem in 405EZ OCM initialization |
| |
| As spotted by Bruce Adler this patch fixes an initialization problem |
| for the 405EZ OCM. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3e3b956906eba9e4ad7931581ecedaad10eccce8 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Fri May 18 16:47:03 2007 +0100 |
| |
| Reduce line lengths to 80 characters max. |
| |
| commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Fri May 18 14:34:07 2007 +0100 |
| |
| Makefile permissions |
| |
| commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Fri May 18 14:33:11 2007 +0100 |
| |
| Makefile permissions |
| |
| commit 255a3577c848706441daee0174543efe205a77f8 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed May 16 16:52:19 2007 -0500 |
| |
| Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx |
| |
| For all practical u-boot purposes, TSECs don't differ throughout the |
| mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 70124c2602ae2d4c5d3dba05b482d91548242de8 |
| Author: Stefano Babic <sbabic@denx.de> |
| Date: Wed May 16 14:49:12 2007 +0200 |
| |
| Fix compile problem cause my Microblaze merge |
| |
| Signed-off-by: Stefano Babic <sbabic@denx.de> |
| |
| commit ada4697d0230d6da552867777f98a67ec3ba2579 |
| Author: Jeffrey Mann <mannj@embeddedplanet.com> |
| Date: Wed May 16 13:23:10 2007 +0200 |
| |
| [PATCH] Run new sequoia boards with an EBC speed of 83MHz |
| |
| Because the Sequoia board does not boot with an EBC faster than 66MHz, |
| the clock divider are changed after the initial boot process. |
| |
| This allows for maximum clocking speeds to be achieved on newer boards. |
| Sequoia boards with 666.66 MHz processors require that the EBC divider |
| be set to 3 in order to start the initial boot process at a slower EBC |
| speed. After the initial boot process, the divider can be set back to 2, |
| which will cause the boards to run at 83.333MHz. This is backward |
| compatible with boards with 533.33 MHz processors, as these boards will |
| already be set with an EBC divider of 2. |
| |
| Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> |
| |
| commit a7676ea7732f3c596805079fed7e5c9fac652cfc |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed May 16 01:16:53 2007 +0200 |
| |
| Minor Coding Style cleanup, update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit d62f64cc23a940eafe712c776b3249e4160753d1 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed May 16 00:13:33 2007 +0200 |
| |
| Coding Style Cleanup, new CHANGELOG |
| |
| commit 3162eb836903c8b247fdc7470dd39bfa6996f495 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue May 15 23:38:05 2007 +0200 |
| |
| Minor coding style cleanup. |
| |
| commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e |
| Author: mushtaq khan <mushtaq_k@procsys.com> |
| Date: Fri Apr 20 14:23:02 2007 +0530 |
| |
| Add driver for S-ATA-controller on Intel processors with South |
| Bridge, ICH-5, ICH-6 and ICH-7. |
| |
| Implementation: |
| |
| 1. Code is divided in to two files. All functions, which are |
| controller specific are kept in "drivers/ata_piix.c" file and |
| functions, which are not controller specific, are kept in |
| "common/cmd_sata.c" file. |
| |
| 2. Reading and Writing from the S-ATA drive is done using PIO method. |
| |
| 3. Driver can be configured for 48-bit addressing by defining macro |
| CONFIG_LBA48, if this macro is not defined driver uses the 28-bit |
| addressing. |
| |
| 4. S-ATA read function is hooked to the File system, commands like |
| ext2ls and ext2load file can be used. This has been tested. |
| |
| 5. U-Boot command "SATA_init" is added, which initializes the S-ATA |
| controller and identifies the S-ATA drives connected to it. |
| |
| 6. U-Boot command "sata" is added, which is used to read/write, print |
| partition table and get info about the drives present. This I have |
| implemented in same way as "ide" command is implemented in U-Boot. |
| |
| 7. This driver is for S-ATA in native mode. |
| |
| 8. This driver does not support the Native command queuing and |
| Hot-plugging. |
| |
| Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com> |
| |
| commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0 |
| Author: mushtaq khan <mushtaq_k@procsys.com> |
| Date: Mon Apr 30 15:57:22 2007 +0530 |
| |
| Fixes bug clearing the bss section for i386 |
| |
| Hi, |
| There is a bug in the code of clearing the bss section for processor |
| i386.(File: cpu/i386/start.S) |
| In the code, bss_start addr (starting addr of bss section) is put into |
| the register %eax, but the code which clears the bss section refers to |
| the addr pointed by %edi. |
| |
| This patch fixes this bug by putting bss_start into %edi register. |
| |
| Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com> |
| |
| commit c3243cf7b490057277d61acffe4ad0946f9eb4a4 |
| Author: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| Date: Mon Apr 30 16:47:28 2007 -0500 |
| |
| Add support for BCM5464 Quad Phy |
| |
| Added support for Broadcom's BCM5464 Quad Phy |
| |
| Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com> |
| |
| commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a |
| Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> |
| Date: Wed May 9 08:10:57 2007 +0800 |
| |
| Search the exception table with linear algorithm |
| |
| Search the exception table with linear algorithm instead of |
| bisecting algorithm. |
| Because the exception table might be unsorted. |
| |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3 |
| Author: Aubrey.Li <aubrey.adi@gmail.com> |
| Date: Mon May 14 11:47:35 2007 +0800 |
| |
| Fix compilation issues on MACOSX |
| |
| Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com> |
| Signed-off-by: Aubrey Li <aubrey.adi@gmail.com> |
| |
| commit 56fd7162985c412317bbf763a225fba23c64fd31 |
| Author: Stephen Williams <steve@icarus.com> |
| Date: Tue May 15 07:55:42 2007 -0700 |
| |
| Fix for compile of JSE target |
| |
| The attached patch fixes the compile of the JSE board in the |
| denx git as of 14 may 2007. It is an extremely simple patch, |
| it just adds the missing define of CFG_SYSTEMACE_WIDTH. |
| |
| Fix to compile JSE against 20070514 git of u-boot |
| |
| commit 69df3c4da0c93017cceb25a366e794570bd0ed98 |
| Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)> |
| Date: Sun May 13 21:01:03 2007 +0900 |
| |
| sh: MS7750SE support. |
| |
| This adds support for the Hitachi MS7750SE. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 0b135cfc2e524dc249b75057b55dd4cc09842e27 |
| Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)> |
| Date: Sun May 13 20:58:00 2007 +0900 |
| |
| sh: First support code of SuperH. |
| |
| Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| |
| commit 61936667e86a250ae12fd2dc189d3588f0a59e0b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri May 11 12:01:49 2007 +0200 |
| |
| ppc4xx: Add mtcpr/mfcpr access macros |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 343c48bd84606c4025c8a7c7263fda465d6e284c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri May 11 12:01:06 2007 +0200 |
| |
| ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7d98ba770a7eaefa29ce927f31a0956df85bf650 |
| Author: Piotr Kruszynski <ppk@semihalf.com> |
| Date: Thu May 10 16:55:52 2007 +0200 |
| |
| [Motion-PRO] Add MTD and JFFS2 support, also add default partition |
| definition. |
| |
| commit 65fb6a676e821f9570a2a376dc204bf611ce5f81 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Wed May 9 11:42:44 2007 +0100 |
| |
| Add the board directory for SMN42 |
| |
| commit 160131bf965785419626df6c388729fe0b597992 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Wed May 9 11:41:58 2007 +0100 |
| |
| Add the files for the SMN42 board |
| |
| commit 5c6d2b5a500f8c49670de8910150b78a41f781fc |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Wed May 9 11:40:34 2007 +0100 |
| |
| Remove the deleted files for the SMN42 patch |
| |
| commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Wed May 9 11:37:56 2007 +0100 |
| |
| New board SMN42 branch |
| |
| commit 29f3be0caf0799ca6b89dfd9824c15619a50000f |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Wed May 9 10:24:38 2007 +0100 |
| |
| Makefile permissions |
| |
| commit b84289b595731e8851df46e893845cc1322c9b9b |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Tue May 8 14:17:07 2007 -0500 |
| |
| 8641hpcn: Fix Makefile after moving pixis to board/freescale. |
| |
| The OBJTREE != SRCTREE build scenario was broken. |
| This fixes it. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Tue May 8 15:57:43 2007 +0200 |
| |
| add: reading special purpose registers |
| |
| commit 1a50f164beb065f360fbddb76029607d6b099698 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Tue May 8 14:52:52 2007 +0200 |
| |
| add: Microblaze V5 exception handling |
| |
| commit ab874d5047e5d30dbc1e517ff26083efffa98ecb |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Tue May 8 14:39:11 2007 +0200 |
| |
| add: FSL control read and write |
| |
| commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3 |
| Author: Piotr Kruszynski <ppk@semihalf.com> |
| Date: Tue May 8 13:05:44 2007 +0200 |
| |
| [Motion-PRO] Add support for I2C, EEPROM and RTC. |
| |
| commit fa5c2ba123b1bf88455bfc21db5e786ca045029d |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue May 8 10:23:56 2007 +0200 |
| |
| [Motion-PRO] Add ATA support. Add CF-booting commands to the default |
| environment. |
| |
| commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue May 8 09:39:12 2007 +0200 |
| |
| [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This |
| eliminates networking problems in Linux (timeouts). |
| |
| commit 1f1369c34b629be94702684d41d3fddf0f6193e7 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue May 8 09:21:57 2007 +0200 |
| |
| [Motion-PRO] Enable Flat Device Tree support and modify default environment |
| to allow booting of FDT-expecting kernels. |
| |
| commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon May 7 23:58:31 2007 +0200 |
| |
| new: USE_MSR_INTR support |
| |
| commit 008861a2f3ef2c062744d733787c7e530a1b8761 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Mon May 7 22:36:15 2007 +0200 |
| |
| [MPC5xxx] There are networking problems on the Motion-PRO board with |
| current PHY initalization code (tftp timeouts all the time). This commit |
| temporarily disables PHY initalization sequence to make the networking |
| operational, until a fix is found. |
| |
| commit abca901869c3760b6c5fecb825db6c1d91a78a93 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon May 7 22:10:36 2007 +0200 |
| |
| Get rid of duplicated file (see include/configs/sbc8560.h instead) |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon May 7 22:07:08 2007 +0200 |
| |
| Get rid of duplicated file (see doc/README.SBC8560 instead) |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit a7bac7e9b57ba948051beb19ec5be3a75ce75383 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon May 7 19:43:10 2007 +0200 |
| |
| fix: read and write MSR - repair number of parameters |
| |
| commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee |
| Author: Jeffrey Mann <mannj@embeddedplanet.com> |
| Date: Mon May 7 19:42:49 2007 +0200 |
| |
| [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file |
| |
| A '3' got cut off in the formatting of the last patch to automatically |
| change the clock speed of the system clock on sequoia board. |
| |
| Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon May 7 19:33:51 2007 +0200 |
| |
| new: fsl interrupt support |
| FSL_Has_data is connected to INTC. |
| |
| commit 792032baa7d625e34c981ab6df521911bd8dc861 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon May 7 19:30:12 2007 +0200 |
| |
| fix: interrupt handler |
| remove asm code |
| |
| commit f3f001a341ef185d0f13841be5b5dc3395aacc31 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon May 7 19:25:08 2007 +0200 |
| |
| fix: remove asm code |
| |
| commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon May 7 19:12:43 2007 +0200 |
| |
| fix: clean interrupt |
| |
| commit 42efed6130c8fcf7da881385b5427065d2801757 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon May 7 17:22:25 2007 +0200 |
| |
| fix: interrupt handler for multiple sources |
| |
| commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Mon May 7 17:11:09 2007 +0200 |
| |
| new: add writing to msr register |
| |
| commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Mon May 7 16:43:56 2007 +0200 |
| |
| Fix an ancient CHANGELOG conflict |
| |
| commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Sat May 5 08:12:30 2007 +0200 |
| |
| 5xxx: write MAC address to mac-address and local-mac-address |
| |
| Some device trees have a mac-address property, some have local-mac-address, |
| and some have both. To support all of these device trees, ftp_cpu_setup() |
| should write the MAC address to mac-address and local-mac-address, if they |
| exist. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2 |
| Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> |
| Date: Sun Apr 29 14:01:54 2007 +0200 |
| |
| [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message |
| |
| MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up |
| message. Use PVR to distinguish between the two variants, and print proper CPU |
| information. |
| |
| Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1 |
| Author: Ladislav Michl <ladis@linux-mips.org> |
| Date: Wed Apr 25 16:01:26 2007 +0200 |
| |
| [PATCH] simplify silent console |
| |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit b7598a43f2b421a713d8135e98a42c37d9eb9df0 |
| Author: Sergei Shtylyov <sshtylyov@ru.mvista.com> |
| Date: Mon Apr 23 15:30:39 2007 +0200 |
| |
| [PATCH] Avoid assigning PCI resources from zero address |
| |
| If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE |
| core complains and IDE drivers fails to work. Also, assigning zero to a BAR |
| was illegal according to PCI 2.1 (the later revisions seem to have excluded the |
| sentence about "0" being considered an invalid address) -- so, use a reasonable |
| starting value of 0x1000 (that's what the most Linux archs are using). |
| |
| Alternatively, one might have fixed the calls to pci_set_region() individually |
| (some code even seems to have taken care of this issue) but that would have |
| been a lot more work. :-) |
| |
| Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 9ffd451afeb08e5be7ddae680487ec962b2bca25 |
| Author: Jeffrey Mann <mannj@embeddedplanet.com> |
| Date: Mon Apr 23 14:00:11 2007 +0200 |
| |
| [patch] setenv(...) can delete environmentalvariables |
| |
| update setenv() function so that entering a NULL value for the |
| variable's value will delete the environmental variable |
| |
| Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit ebd0a0ae05a44769c4e27458ad4e9f3438250443 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Apr 23 13:54:24 2007 +0200 |
| |
| [patch] use unsigned char in smc91111 driver for mac |
| |
| the v_mac variable in the smc91111 driver is declared as a signed char ... |
| this causes problems when one of the bytes in the MAC is "signed" like 0xE0 |
| because when it gets printed out, you get a display like: |
| 0xFFFFFFE0 and that's no good |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit ffc50f9bb194343c6303517a517708457a5eb6b8 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat May 5 18:54:42 2007 +0200 |
| |
| new: FSL and MSR support #2 |
| |
| commit f7e2e0eb0668136305f78bb9c21be79b48a34247 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat May 5 18:27:16 2007 +0200 |
| |
| new: FSL and MSR support |
| |
| commit 2f15278c2eb911c668b4fe562130b78cf554d139 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat May 5 18:23:11 2007 +0200 |
| |
| Coding stylke cleanup; update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 885ec89b648a899a2f32393fd3ffd9f7234c4402 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat May 5 18:05:02 2007 +0200 |
| |
| Add STX GP3 SSA board to MAKEALL script; update CHANGELOG. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5499645b3fe17a548af9dfc479ca6e2455f179a2 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat May 5 17:15:50 2007 +0200 |
| |
| Make "file" command happy with some config.mk files; update CHANGELOG |
| |
| commit e3b8c78bc2489c27ae020986ef0eaca684866cef |
| Author: Jeffrey Mann <mannj@embeddedplanet.com> |
| Date: Sat May 5 08:32:14 2007 +0200 |
| |
| ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz |
| |
| The AMCC Secquoia board has been changed in a new revision from using a |
| 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD |
| indicates the difference. This patch reads that bit and uses the correct |
| clock speed for the board. This code is backward compatable will all |
| prior boards. All prior boards will be read as 33.000. |
| |
| Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f544ff6656fca263ed1ebe39899b6d95da67c8b8 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat May 5 08:29:01 2007 +0200 |
| |
| ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting |
| |
| Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big |
| for the 4k NAND boot image so define bus_frequency to 133MHz here |
| which is save for the refresh counter setup. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2f550ab976405300f5b07bf2890800840d0aa05f |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Sat May 5 08:12:30 2007 +0200 |
| |
| 5xxx: write MAC address to mac-address and local-mac-address |
| |
| Some device trees have a mac-address property, some have local-mac-address, |
| and some have both. To support all of these device trees, ftp_cpu_setup() |
| should write the MAC address to mac-address and local-mac-address, if they |
| exist. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit a79886590593ba1d667c840caa4940c61639f18f |
| Author: Thomas Knobloch <knobloch@siemens.com> |
| Date: Sat May 5 07:04:42 2007 +0200 |
| |
| NAND: Wrong calculation of page number in nand_block_bad() |
| |
| In case that there is no memory based bad block table available the |
| function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call |
| nand_block_bad() directly. When parameter 'getchip' is set to zero, |
| nand_block_bad() will not right shift the offset to calculate the |
| correct page number. |
| |
| Signed-off-by: Thomas Knobloch <knobloch@siemens.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri May 4 10:02:33 2007 +0200 |
| |
| Fix initrd length corruption in bootm command. |
| |
| When using FDT Images, the length of an inital ramdisk was |
| overwritten (bug introduced by commit 87a449c8, 22 Aug 2006). |
| |
| Patches by Timur Tabi & Johns Daniel. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu May 3 19:43:52 2007 -0500 |
| |
| mpc83xx: fix trivial error in MAKEALL |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu May 3 16:34:41 2007 +0200 |
| |
| Update board configuration for STX GP3SSA board: |
| |
| Enable hush shell, environment in flash rather in EEPROM, |
| more user-friendly default environment, etc. |
| The simple EEPROM environment can be selected easily in the board |
| config file. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 2c6fb199dc5756fc72f49d1f4de105e089049d65 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Apr 24 14:37:49 2007 +0200 |
| |
| Cleanup STX GP3SSA code; fix build and compile problems. |
| |
| commit 35171dc04e028ecacc23ad916a66295472555dbf |
| Author: Dan Malek <dan@embeddedalley.com> |
| Date: Fri Jan 5 09:15:34 2007 +0100 |
| |
| Add support for STX GP3SSA (stxssa) Board |
| |
| Signed-off-by Dan Malek, <dan@embeddedalley.com> |
| |
| commit f2134f8e9eb006bdcd729e89f309c07b2fa45180 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Wed May 2 13:31:53 2007 +0200 |
| |
| macb: Don't restart autonegotiation if we already have link |
| |
| Rework macb_phy_init so that it doesn't attempt to re-negotiate if the |
| link is already up. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 04fcb5d38bc90779cd9a710d60702075986f0e29 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Wed May 2 13:22:38 2007 +0200 |
| |
| macb: Introduce a few barriers when dealing with DMA descriptors |
| |
| There were a few theoretical possibilities that the compiler might |
| optimize away DMA descriptor reads and/or writes and thus cause |
| synchronization problems with the hardware. Insert barriers where |
| we depend on reads/writes actually hitting memory. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit ffa621a0d12a1ccd81c936c567f8917a213787a8 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Sat Feb 24 01:08:13 2007 -0600 |
| |
| Cleaned up some 85xx PCI bugs |
| |
| * Cleaned up the CDS PCI Config Tables and added NULL entries to |
| the end |
| * Fixed PCIe LAWBAR assignemt to use the cpu-relative address |
| * Fixed 85xx PCI code to assign powar region sizes based on the |
| config values (rather than hard-coding them) |
| * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 6743105988fc44d5b0d30388c790607835aae7a6 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Apr 23 02:54:25 2007 -0500 |
| |
| Add support for the 8568 MDS board |
| |
| This included some changes to common files: |
| * Add 8568 processor SVR to various places |
| * Add support for setting the qe bus-frequency value in the dts |
| * Add the 8568MDS target to the Makefile |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit af1c2b84bf27c8565baddc82d1abb93700d10e2e |
| Author: David Updegraff <dave@cray.com> |
| Date: Fri Apr 20 14:34:48 2007 -0500 |
| |
| Add support for treating unknown PHYs as generic PHYs. |
| |
| When bringing up u-boot on new boards, PHY support sometimes gets |
| neglected. Most PHYs don't really need any special support, |
| though. By adding a generic entry that always matches if nothing |
| else does, we can provide support for "unsupported" PHYs for the |
| tsec. |
| |
| The generic PHY driver supports most PHYs, including gigabit. |
| |
| Signed-off-by: David Updegraff <dave@cray.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit a75af9bfd8fff0499efdbb90601cec5a2afef117 |
| Author: James Yang <James.Yang@freescale.com> |
| Date: Wed Feb 7 15:28:04 2007 -0600 |
| |
| Conditionalize 8641 Rev1.0 MCM workarounds |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit f64702b7fc8f8df39d31add770df6e372f9e9ce3 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Mon Apr 30 13:59:50 2007 -0500 |
| |
| Fix memory initialization on MPC8349E-mITX |
| |
| Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP. |
| This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary |
| on some ITX boards, notably those with a revision 3.1 CPU. |
| |
| Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into |
| ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Acked-by: Michael Benedict <MBenedict@twacs.com> |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Mon Apr 30 15:26:21 2007 -0500 |
| |
| mpc83xx: replace elaborate boottime verbosity with 'clocks' command |
| |
| and fix CPU: to align with Board: display text. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit c1ab82669d9525998c34e802a12cad662723f22a |
| Author: James Yang <James.Yang@freescale.com> |
| Date: Fri Mar 16 13:02:53 2007 -0500 |
| |
| Rewrote picos_to_clk() to avoid rounding errors. |
| Clarified that conversion is to DRAM clocks rather than platform clocks. |
| Made function static to spd_sdram.c. |
| |
| Signed-off-by: James Yang <James.Yang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 8b39501d28754e72726ce7fb02310e56dbdf116a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sun Apr 29 14:13:01 2007 +0200 |
| |
| ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9 |
| Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> |
| Date: Sun Apr 29 14:01:54 2007 +0200 |
| |
| [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message |
| |
| MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up |
| message. Use PVR to distinguish between the two variants, and print proper CPU |
| information. |
| |
| Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> |
| Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 5c5d3242935cf3543af01142627494434834cf98 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Apr 25 12:34:38 2007 -0500 |
| |
| mpc83xx: minor fixups for 8313rdb introduction |
| |
| commit ada4d40091f6ed4a4f0040e08d20db21967e4a67 |
| Author: Ladislav Michl <ladis@linux-mips.org> |
| Date: Wed Apr 25 16:01:26 2007 +0200 |
| |
| [PATCH] simplify silent console |
| |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 144876a380f5756f57412caf74c1d6dc201dd796 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Tue Apr 24 23:01:02 2007 +0200 |
| |
| [PATCH] MTD partition support, JFFS2 support |
| |
| commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Apr 24 14:03:45 2007 +0200 |
| |
| ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Apr 23 02:37:47 2007 -0500 |
| |
| Reworked 85xx speed detection code |
| |
| Changed the code to read the registers and calculate the clock |
| rates, rather than using a "switch" statement. |
| |
| Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com> |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 81f481ca708ed6a56bf9c410e3191dbad581c565 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Apr 23 02:24:28 2007 -0500 |
| |
| Enable 8544 support |
| |
| * Add support to the Makefile |
| * Add 8544 configuration support to the tsec driver |
| * Add 8544 SVR numbers to processor.h |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Fri Feb 23 17:12:25 2007 -0600 |
| |
| Support 1G size on 8548 |
| |
| e500v2 and newer cores support 1G page sizes. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Fri Feb 23 17:11:16 2007 -0600 |
| |
| Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG |
| |
| The other pagesz constants use one letter to specify order of |
| magnitude. Also change the one reference to it in mpc8548cds/init.S |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 1f9a318cea14272edd10d63739e2d326c90f430e |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Fri Feb 23 16:28:46 2007 -0600 |
| |
| Only set ddrioovcr for 8548 rev1. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Sat Feb 24 01:16:45 2007 -0600 |
| |
| Tweak DDR ECC error counter |
| |
| Enable single-bit error counter when memory was cleared by ddr controller. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Mon Feb 12 13:34:55 2007 -0600 |
| |
| 85xx: write MAC address to mac-address and local-mac-address |
| |
| Some device trees have a mac-address property, some have local-mac-address, |
| and some have both. To support all of these device trees, ftp_cpu_setup() |
| should write the MAC address to mac-address and local-mac-address, if they |
| exist. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Apr 23 01:44:44 2007 -0500 |
| |
| Some 85xx cpu cleanups |
| |
| * Cleaned up the TSR[WIS] clearing |
| * Cleaned up DMA initialization |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Mon Apr 23 01:32:22 2007 -0500 |
| |
| Add cpu support for the 8544 |
| |
| Recognize new SVR values, and add a few register definitions |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| Acked-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Apr 11 16:51:02 2007 -0500 |
| |
| Add MPC8544DS basic port board files. |
| |
| Add board port under new board/freescale directory |
| structure and reuse existing PIXIS FPGA support there. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Apr 11 16:50:57 2007 -0500 |
| |
| Add MPC8544DS main configuration file. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6 |
| Author: Sergei Shtylyov <sshtylyov@ru.mvista.com> |
| Date: Wed Dec 27 22:07:15 2006 +0300 |
| |
| Fix PCI I/O space mapping on Freescale MPC85x0ADS |
| |
| The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit |
| 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's |
| describing the local address window used for the PCI I/O space accesses -- fix |
| this and carry over the necessary changes into the MPC8560ADS code since the |
| PCI I/O space mapping was also broken for this board (by the earlier commit |
| 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how |
| the PCI I/O space must be mapped to all the MPC85xx board config. headers. |
| |
| Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> |
| |
| board/mpc8540ads/init.S | 4 ++-- |
| board/mpc8560ads/init.S | 4 ++-- |
| include/configs/MPC8540ADS.h | 5 ++--- |
| include/configs/MPC8541CDS.h | 2 +- |
| include/configs/MPC8548CDS.h | 2 +- |
| include/configs/MPC8560ADS.h | 8 ++++---- |
| 6 files changed, 12 insertions(+), 13 deletions(-) |
| |
| commit 96629cbabdb727d4a5e62542deefc01d498db6dc |
| Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> |
| Date: Tue Dec 5 16:42:30 2006 +0800 |
| |
| u-boot: Fix e500 v2 core reset bug |
| |
| The following patch fixes the e500 v2 core reset bug. |
| For e500 v2 core, a new reset control register is added to reset the |
| processor. |
| |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 63247a5acd58032e6cf33f525bc3923b467bac88 |
| Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> |
| Date: Wed Dec 20 11:01:00 2006 +0800 |
| |
| u-boot: v2: Remove the fixed TLB and LAW entrynubmer |
| |
| Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW |
| entry number to control the loop. This can reduce the potential risk |
| for the 85xx processor increasing its TLB adn LAW entry number. |
| |
| Signed-off-by: Swarthout Edward <swarthout@freescale.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf |
| Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> |
| Date: Mon Dec 18 17:01:04 2006 +0800 |
| |
| u-boot: Fix the 85xxcds tsec bug |
| |
| Fix the 85xxcds tsec bug. |
| When enable PCI, tsec.o should be added to u-boot.lds to make tsec work. |
| |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 7337b237ffc4aaf1b9467024fe472a880d852598 |
| Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> |
| Date: Fri Dec 15 14:43:31 2006 +0800 |
| |
| u-boot: Fix CPU2 errata on MPC8548CDS board |
| |
| This patch apply workaround of CPU2 errata on MPC8548CDS board. |
| |
| Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com> |
| |
| commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09 |
| Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com> |
| Date: Mon Dec 18 16:25:15 2006 +0800 |
| |
| u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default |
| |
| This patch disables MPC8548CDS 2T_TIMING for DDR by default. |
| |
| Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com> |
| |
| commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7 |
| Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> |
| Date: Thu Dec 14 14:14:55 2006 +0800 |
| |
| u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board |
| |
| Enable PCI function and add PEX & rapidio memory map on MPC8548CDS |
| board. |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 96b8a05432f346f36493535c85320b70ec9c7c1b |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Apr 16 14:54:15 2007 -0500 |
| |
| mpc83xx: Add MPC8313ERDB support. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 49ea3b6eafe606285ae4d5c378026153dde53200 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Apr 16 14:34:21 2007 -0500 |
| |
| mpc83xx: Add generic PCI setup code. |
| |
| Board code can now request the generic setup code rather than having to |
| copy-and-paste it for themselves. Boards should be converted to use this |
| once they're tested with it. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Apr 16 14:34:19 2007 -0500 |
| |
| mpc83xx: Add 831x support to speed.c. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Apr 16 14:34:18 2007 -0500 |
| |
| mpc83xx: Add 831x support to global_data.h |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 95e7ef897e54591e615fc1b458b74c286fe1fb06 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Apr 16 14:34:16 2007 -0500 |
| |
| mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu(). |
| |
| Rather than misleadingly define PVR_83xx as the specific type of 83xx |
| being built for, the PVR of each core revision is defined. checkcpu() now |
| prints the core that it detects, rather than aborting if it doesn't find |
| what it thinks it wants. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit a35b0c4950d84cf9e3a9e32b916135956d1ac636 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Apr 16 14:34:15 2007 -0500 |
| |
| mpc83xx: Recognize SPR values for MPC8311 and MPC8313. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit d87c57b201b4572d16f1b642998faa00c9912b16 |
| Author: Scott Wood <scottwood@freescale.com> |
| Date: Mon Apr 16 14:31:55 2007 -0500 |
| |
| mpc83xx: Add register definitions for MPC831x. |
| |
| Signed-off-by: Scott Wood <scottwood@freescale.com> |
| |
| commit 7fc4c71a143be8666d70803fb25ae60379c95622 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Apr 23 15:39:59 2007 +0200 |
| |
| Fix file mode |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 38257988abfe74d459ca2ad748b109ca04e4efe1 |
| Author: Sergei Shtylyov <sshtylyov@ru.mvista.com> |
| Date: Mon Apr 23 15:30:39 2007 +0200 |
| |
| [PATCH] Avoid assigning PCI resources from zero address |
| |
| If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE |
| core complains and IDE drivers fails to work. Also, assigning zero to a BAR |
| was illegal according to PCI 2.1 (the later revisions seem to have excluded the |
| sentence about "0" being considered an invalid address) -- so, use a reasonable |
| starting value of 0x1000 (that's what the most Linux archs are using). |
| |
| Alternatively, one might have fixed the calls to pci_set_region() individually |
| (some code even seems to have taken care of this issue) but that would have |
| been a lot more work. :-) |
| |
| Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit afb903a2eb9436baa9270ccc0c27082d86497d89 |
| Author: Jeffrey Mann <mannj@embeddedplanet.com> |
| Date: Mon Apr 23 14:00:11 2007 +0200 |
| |
| [patch] setenv(...) can delete environmentalvariables |
| |
| update setenv() function so that entering a NULL value for the |
| variable's value will delete the environmental variable |
| |
| Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> |
| Acked-by: Stefan Roese <sr@denx.de> |
| |
| commit 36f104e5caa747d568eff26b369565af57c2ffa6 |
| Author: Mike Frysinger <vapier@gentoo.org> |
| Date: Mon Apr 23 13:54:24 2007 +0200 |
| |
| [patch] use unsigned char in smc91111 driver for mac |
| |
| the v_mac variable in the smc91111 driver is declared as a signed char ... |
| this causes problems when one of the bytes in the MAC is "signed" like 0xE0 |
| because when it gets printed out, you get a display like: |
| 0xFFFFFFE0 and that's no good |
| |
| Signed-off-by: Mike Frysinger <vapier@gentoo.org> |
| |
| commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459 |
| Author: Rodolfo Giometti <giometti@enneenne.com> |
| Date: Mon Apr 23 13:10:52 2007 +0200 |
| |
| USB: (Another) delay for crappy USB keys. |
| |
| Some USB keys are slow in giving back an answer when the Root HUB |
| enables power lines. |
| |
| Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| |
| commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Apr 23 12:00:22 2007 +0200 |
| |
| Remove BOARDLIBS usage completely |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 32556443840f127170e4baa8bdd5b567039f6c36 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat Apr 21 21:07:22 2007 +0200 |
| |
| [PATCH] SystemACE support for Microblaze |
| |
| commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat Apr 21 21:02:40 2007 +0200 |
| |
| 16bit read/write little endian |
| |
| commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sat Apr 21 20:53:31 2007 +0200 |
| |
| Change ML401 parameters - Xilinx BSP |
| |
| commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Feb 28 05:37:29 2007 -0600 |
| |
| mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| |
| commit 79cb47391eebef85acadb3f6961ef6c55cace6ac |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Fri Jan 19 10:42:37 2007 +0800 |
| |
| Enable LAWs for MPC8641 PCI-Ex2. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit bd7851ce1e1f140665b520026abf1042968b1102 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Apr 20 14:12:26 2007 -0500 |
| |
| mpc86xx; Write MAC address to mac-address and local-mac-address |
| |
| Some device trees have a mac-address property, some have local-mac-address, |
| and some have both. To support all of these device trees, ftp_cpu_setup() |
| should write the MAC address to mac-address and local-mac-address, if they |
| exist. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7dbdf28b8bd855a8530dc3292e4982575a197060 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Apr 20 14:11:38 2007 -0500 |
| |
| mpc86xx: protect memcpy to bad address if a mac-address is missing from dt |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 14da5f7675bbb427c469e3f45006e027b6e21db9 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Fri Apr 20 17:43:28 2007 +0200 |
| |
| Cleanup compiler warnings, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 6923565db12af34fd5e02d354ee65a8c78ac460f |
| Author: Detlev Zundel <dzu@denx.de> |
| Date: Fri Apr 20 12:01:47 2007 +0200 |
| |
| Fix breakage of NC650 board with respect to nand support. |
| |
| Signed-off-by: Detlev Zundel <dzu@denx.de> |
| |
| commit 39f23cd90947639ac278a18ff277ec786b5ac167 |
| Author: Domen Puncer <domen.puncer@telargo.com> |
| Date: Fri Apr 20 11:13:16 2007 +0200 |
| |
| [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation |
| |
| G2 core reference manual says decrementer and time base |
| are decreasing/increasing once every 4 bus clock cycles. |
| Lets fix it, so time in Linux won't run twice as fast |
| |
| Signed-off-by: Domen Puncer <domen.puncer@telargo.com> |
| Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Thu Apr 19 23:14:39 2007 -0400 |
| |
| Fix serious pointer bug with bootm and reserve map. |
| |
| What was suppose to be a stack variable was declared as a pointer, |
| overwriting random memory. |
| Also moved the libfdt.a requirement into the main Makefile. That is |
| The U-Boot Way. |
| |
| commit d21686263574e95cb3e9e9b0496f968b1b897fdb |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Apr 19 09:53:52 2007 +0200 |
| |
| ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai |
| |
| Previous versions used full wait states for the chip select #1 which |
| is connected to the Xilinix SystemACE controller on the AMCC Katmai |
| evaluation board. This leads to really slow access and therefore low |
| performance. This patch now sets up the chip select a lot faster |
| resulting in much better read/write performance of the Linux driver. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 37837828d89084879bee2f2b8c7c68d4695940df |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 18 17:49:29 2007 +0200 |
| |
| Clenaup, update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 18 17:20:58 2007 +0200 |
| |
| Update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 18 17:07:26 2007 +0200 |
| |
| Cleanup, update CHANGELOG |
| |
| Sigend-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 5f6c732affea9647762d27a4617a2ae64c52dceb |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 18 16:17:46 2007 +0200 |
| |
| Update CHANGELOG |
| |
| commit ad4eb555671d97f96dc56eab55103b1f86874b01 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 18 14:30:39 2007 +0200 |
| |
| MCC200 board: remove warning which is obsolete after PSoC firmware changes |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 3747a3f010b2b1442dec3e871c69788b6017aaae |
| Author: Domen Puncer <domen.puncer@telargo.com> |
| Date: Wed Apr 18 12:11:05 2007 +0200 |
| |
| [PATCH] icecube/lite5200b: document wakeup from low-power support |
| |
| Signed-off-by: Domen Puncer <domen.puncer@telargo.com> |
| |
| commit e673226ff9d6aa91b47ceac74b8c13770b06bb37 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Apr 18 12:07:47 2007 +0200 |
| |
| ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Apr 18 12:05:59 2007 +0200 |
| |
| ppc4xx: Add output for bootrom location to 405EZ ports |
| |
| Now 405EZ ports also show upon bootup from which boot device |
| they are configured to boot: |
| |
| U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05) |
| |
| CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz) |
| Bootstrap Option E - Boot ROM Location EBC (32 bits) |
| 16 kB I-Cache 16 kB D-Cache |
| Board: Acadia - AMCC PPC405EZ Evaluation Board |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85 |
| Author: Peter Pearse <peter.pearse@arm.com> |
| Date: Tue Apr 17 13:30:33 2007 +0100 |
| |
| Move ppearse to ARM board list |
| Add Konstantin Kletschke for scb9328. |
| Signed-off-by: Peter Pearse <peter.pearse@arm.com> |
| |
| commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3 |
| Author: Domen Puncer <domen.puncer@telargo.com> |
| Date: Mon Apr 16 14:00:13 2007 +0200 |
| |
| [PATCH] icecube/lite5200b: wakeup from low-power support |
| |
| U-Boot part of Lite5200b low power mode support. |
| Puts SDRAM out of self-refresh and transfers control to |
| address saved at physical 0x0. |
| |
| Signed-off-by: Domen Puncer <domen.puncer@telargo.com> |
| Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sun Apr 15 13:54:26 2007 -0400 |
| |
| Fix the ft_cpu_setup() property settings. |
| |
| Use "setter" functions instead of flags, cleaner and more flexible. |
| It also fixes the problem noted by Timur Tabi that the ethernet MAC |
| addresses were all being set incorrectly to the same MAC address. |
| |
| commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Apr 14 22:51:24 2007 -0400 |
| |
| Improve the bootm command for CONFIG_OF_LIBFDT |
| |
| In bootm, create the "/chosen" node only if it doesn't already exist |
| (better matches the previous behavior). |
| Update for proper reserved memory map handling for initrd. |
| |
| commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Apr 14 22:46:41 2007 -0400 |
| |
| Add some utilities to manipulate the reserved memory map. |
| |
| commit 8048cdd56f04a756eeea4951f402bf5cc33785db |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Apr 14 21:16:54 2007 +0200 |
| |
| Update CHANGELOG |
| |
| commit 8e6875183cdca91c134408d119d4abcd48ef6856 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Dec 17 18:56:46 2006 +0100 |
| |
| AVR32: Enable MMC support |
| |
| Set up the portmux for the MMC interface and enable the MMC driver |
| along with support for DOS partitions, ext2 and FAT filesystems. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit fc26c97bb6df41b4a95662c34054fe912387bf38 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri Jan 20 10:03:53 2006 +0100 |
| |
| Atmel MCI driver |
| |
| Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs. |
| |
| The AT91 ARM-based CPUs use basically the same hardware, so it should |
| be possible to share this driver, but no effort has been made so far. |
| |
| Hardware documentation can be found in the AT32AP7000 data sheet, |
| which can be downloaded from |
| |
| http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Dec 17 18:55:37 2006 +0100 |
| |
| AVR32: Add clk and gpio infrastructure for mmci |
| |
| Implement functions for configuring the mmci pins, as well as |
| functions for getting the clock rate of the mmci controller. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 7fac3f69e9f05c5e5326681976c35d129324c4de |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Dec 17 18:53:56 2006 +0100 |
| |
| Enable partition support with MMC |
| |
| Include implementations of init_part() and get_partition_info() when |
| CONFIG_MMC is set. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Dec 17 17:14:30 2006 +0100 |
| |
| AVR32: Enable networking |
| |
| Implement MACB initialization for AVR32 and ATSTK1000, and turn |
| everything on, including the MACB driver. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Fri Jan 20 10:03:34 2006 +0100 |
| |
| Atmel MACB ethernet driver |
| |
| Driver for the Atmel MACB on-chip ethernet controller. |
| |
| This driver has been tested on the ATSTK1000 board with a AT32AP7000 |
| CPU. It should probably work on AT91SAM926x as well with some minor |
| modifications. |
| |
| Hardware documentation can be found in the AT32AP7000 data sheet, |
| which can be downloaded from |
| |
| http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Dec 17 16:56:14 2006 +0100 |
| |
| AVR32: Add clk and gpio infrastructure for macb0 and macb1 |
| |
| Implement functions for configuring the macb0 and macb1 pins, as |
| well as functions for getting the clock rate of the various |
| busses the macb ethernet controllers are connected to. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit d5acb95b16a0a74c643524342c3437e765426d05 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Dec 17 15:39:15 2006 +0100 |
| |
| AVR32: Implement simple DMA memory allocator |
| |
| Implement dma_alloc_coherent() which returns cache-aligned |
| uncacheable memory. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 91975b0fea773c9e681fea8cf3349669f27685ee |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Dec 17 15:46:02 2006 +0100 |
| |
| Import <linux/mii.h> from the Linux kernel |
| |
| Instead of creating yet another set of MII register definitions |
| in the macb driver, here's a complete set of definitions for everyone |
| to use. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 1b804b229556a4d862da93c0ec94e79419364b2c |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Wed Mar 21 19:47:36 2007 +0100 |
| |
| AVR32: Include more commands for ATSTK1000 |
| |
| Include the imi, imls and jffs commands sets by default on ATSTK1000. |
| Also define CONFIG_BOOTARGS to something more useful, define |
| CONFIG_BOOTCOMMAND and enable autoboot by default. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Wed Mar 21 19:44:48 2007 +0100 |
| |
| AVR32: Provide a definition of struct stat |
| |
| Copy the definition of struct stat from the Linux kernel. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 12f099c08167a7a51aeee623bc16dafd0841271c |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Dec 17 14:46:06 2006 +0100 |
| |
| AVR32: Use initdram() instead of board_init_memories() |
| |
| Conform to the "standard" interface and use initdram() instead of |
| board_init_memories() on AVR32. This enables us to get rid of the |
| sdram_size member of the global_data struct as well. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Mon Nov 20 15:53:10 2006 +0100 |
| |
| AVR32: Relocate u-boot to SDRAM |
| |
| Relocate the u-boot image into SDRAM like everyone else does. This |
| means that we can handle much larger .data and .bss than we used to. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit df548d3c3e2bbc40258713167859ffc2ce99a900 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sun Nov 19 18:06:53 2006 +0100 |
| |
| AVR32: Resource management rewrite |
| |
| Rewrite the resource management code (i.e. I/O memory, clock gating, |
| gpio) so it doesn't depend on any global state. This is necessary |
| because this code is heavily used before relocation to RAM, so we |
| can't write to any global variables. |
| |
| As an added bonus, this makes u-boot's memory footprint a bit smaller, |
| although some functionality has been left out; all clocks are enabled |
| all the time, and there's no checking for gpio line conflicts. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sat Nov 18 18:01:13 2006 +0100 |
| |
| AVR32: Clean up memory-map.h for at32ap7000 |
| |
| Convert spaces to tabs (must have missed this one last time around), |
| sort the entries by address and group them together by bus |
| connectivity. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 28c699ef69f4b6cdf252e4747b7b590028a88981 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sat Nov 18 17:32:31 2006 +0100 |
| |
| AVR32: Build position-independent u-boot |
| |
| Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot |
| position independent. This will make relocation a lot easier. |
| |
| -mno-init-got means that gcc shouldn't emit code to load the GOT |
| address into r6 in every function prologue. We do it once and for |
| all in the early startup assembly code, so enabling this option |
| makes u-boot a bit faster and smaller. |
| |
| The assembly parts have always been position-independent, so no code |
| changes should be necessary. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 5374b36de91d006d1df9536259fa9f66b01aa3aa |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sat Nov 18 17:24:31 2006 +0100 |
| |
| AVR32: Use avr32-linux- cross-compilation prefix by default |
| |
| It doesn't really matter which toolchain you use to compile u-boot, |
| but the avr32-linux one is probably what most people have installed. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit c841beeddebece0039e724fb27f4d1a39ee1c6b6 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Sat Nov 18 17:15:30 2006 +0100 |
| |
| AVR32: Split start_u_boot into board_init_f and board_init_r |
| |
| Split the avr32 initialization code into a function to run before |
| relocation, board_init_f and a function to run after relocation, |
| board_init_r. For now, board_init_f simply calls board_init_r |
| at the end. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Sat Apr 14 05:26:48 2007 +0200 |
| |
| [Fix] Set the LED status register on the UC101 for the LXT971 PHY. |
| clear the Display after reset. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 7882751c78b7ecabfd49b0eff8de27661c71f16c |
| Author: Denis Peter <d.peter@mpl.ch> |
| Date: Fri Apr 13 09:13:33 2007 +0200 |
| |
| [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c |
| |
| Fix bug introduced by "Fix get_partition_info() parameter error in all |
| other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented |
| to use diskboot or scsiboot form another device than 0. |
| |
| Signed-off-by: Denis Peter <d.peter@mpl.ch> |
| |
| commit 0b94504d22e70f537c17a0d38c87edb6e370977d |
| Author: Greg Lopp <lopp@pobox.com> |
| Date: Fri Apr 13 08:02:24 2007 +0200 |
| |
| [PATCH] Fix use of "void *" for block dev read/write buffer pointers |
| |
| Signed-of-by: Greg Lopp <lopp@pobox.com> |
| Acked-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9 |
| Author: Xie Xiaobo <r63061@freescale.com> |
| Date: Fri Mar 9 19:08:25 2007 +0800 |
| |
| Fix two bugs for MPC83xx DDR2 controller SPD Init |
| |
| There are a few bugs in the cpu/mpc83xx/spd_sdram.c |
| the first bug is that the picos_to_clk routine introduces a huge |
| rounding error in 83xx. |
| the second bug is that the mode register write recovery field is |
| tWR-1, not tWR >> 1. |
| |
| commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13 |
| Author: Jeffrey Mann <mannj@embeddedplanet.com> |
| Date: Thu Apr 12 14:15:59 2007 +0200 |
| |
| ppc4xx: Fix i2c divisor calcularion for PPC4xx |
| |
| This patch fixes changes the i2c_init(...) function to use the function |
| get_OPB_freq() rather than calculating the OPB speed by |
| sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is |
| specific per processor. The prior method was not and so was calculating |
| the wrong speed for some PPC4xx processors. |
| |
| Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6c9ba919375db977aaad9146bf320c7afd07ae7a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 11 17:25:01 2007 +0200 |
| |
| Update CHANGELOG |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 51056dd9863e6a1bc363afbbe1775c58cd967418 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 11 17:22:55 2007 +0200 |
| |
| Update for SC3 board |
| |
| * Make IDE timeout configurable through ide_reset_timeout variable. |
| * Use Newline as "password" string |
| * Use just a single partition in NAND flash |
| |
| commit 3d98b85800c80dc68227c8f10bf5c93456d6d054 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Mon Jan 22 12:37:30 2007 -0600 |
| |
| Add PIXIS FPGA support for MPC8641HPCN board. |
| |
| Move the 8641HPCN's PIXIS code to the new directory |
| board/freescale/common/ as it will be shared by |
| future boards not in the same processor family. |
| |
| Write a "pixis_reset" command that utilizes the FPGA |
| reset sequencer to support alternate soft-reset options |
| such as using the "alternate" flash bank, enabling |
| the watch dog, or choosing different CPU frequencies. |
| |
| Add documentation for the pixis_reset to README.mpc8641hpcn. |
| |
| Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Fri Apr 6 14:19:43 2007 -0400 |
| |
| Moved fdt command support code to fdt_support.c |
| |
| ...in preparation for improving the bootm command's handling of fdt blobs. |
| Also cleaned up some coding sloppiness. |
| |
| commit 6679f9299534e488a171a9bb8f9bb891de247aab |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Fri Apr 6 14:17:14 2007 -0400 |
| |
| libfdt: Make fdt_check_header() public |
| |
| Changed _fdt_check_header() to fdt_check_header() and made it part of |
| the interface - it is a useful routine. |
| |
| Also did some asthetics cleanup to the include files (headers). |
| |
| commit c0707ce65677650b5ceab0500ee50ae5168afef2 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Thu Apr 5 18:34:06 2007 +0800 |
| |
| [Blackfin][PATCH] Kill off a bunch of common local prototypes |
| |
| commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Thu Apr 5 18:33:04 2007 +0800 |
| |
| [Blackfin][PATCH] Fix dynamic CPLB generation issue |
| |
| commit 0445e3a264251d75b1be45ef713c70726a2952f0 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Thu Apr 5 18:31:47 2007 +0800 |
| |
| [Blackfin][PATCH] minior cleanup |
| |
| commit 155fd766573981090e638b493d5857562151862e |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Thu Apr 5 18:31:18 2007 +0800 |
| |
| [Blackfin][PATCH] Fix copyright and update license |
| |
| commit 9fd437bbd75d282f899e1da50be20a2bf38450bc |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Thu Apr 5 18:30:25 2007 +0800 |
| |
| [Blackfin][PATCH] Add BF537 EMAC driver initialization |
| |
| commit 889256e8604e0c68db1d866d720894dffede9df6 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Thu Apr 5 18:29:55 2007 +0800 |
| |
| [Blackfin][PATCH] call real the system synchronize instruction |
| |
| commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Thu Apr 5 18:29:17 2007 +0800 |
| |
| [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it |
| |
| commit dfeeab2cd680df047e68e723b246adf6f33bb556 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Thu Apr 5 18:28:34 2007 +0800 |
| |
| [Blackfin][PATCH]: fix flash unaligned copy issue |
| |
| commit 443feb740584e406efa203af909fe2926608e8d5 |
| Author: Igor Marnat <marny@rambler.ru> |
| Date: Wed Mar 21 09:55:01 2007 +0300 |
| |
| Update usage of 'nc' in README.NetConsole |
| |
| Added information about usage of NetConsole on systems where the -l and -p |
| switches are mutually exclusive. |
| |
| Signed-off-by: Igor Marnat <marny@rambler.ru> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 31c98a88228021b314c89ebb8104fb6473da4471 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 4 02:09:30 2007 +0200 |
| |
| Minor coding style cleanup. |
| |
| commit 94abd7c0583ebe01e799b25f451201deeaab550d |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Apr 4 01:49:15 2007 +0200 |
| |
| Minor cleanup. |
| |
| commit 822af351ad2babc7d99033361a5fcacd30f6bc78 |
| Author: Rodolfo Giometti <giometti@enneenne.com> |
| Date: Tue Apr 3 14:27:18 2007 +0200 |
| |
| Support for the Philips ISP116x HCD (Host Controller Driver) |
| |
| Signed-off-by: Rodolfo Giometti <giometti@enneenne.com> |
| |
| commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue Apr 3 14:27:08 2007 +0200 |
| |
| USB: cleanup monahans usb support. Remove dead code. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit a65c5768e5537530bd1780af3d3fddc3113a163c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Apr 2 10:09:30 2007 +0200 |
| |
| ppc4xx: Change SysACE address on Katmai |
| |
| With this new base address of the Xilinx SystemACE controller |
| the Linux driver will be easier to adapt, since it can now be |
| mapped via the "normal" ioremap() call. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Mar 31 14:30:53 2007 -0400 |
| |
| Fix some minor whitespace violations. |
| |
| commit 213bf8c822de8eecaf69860684469cdaba2e9e6a |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Mar 31 12:23:51 2007 -0400 |
| |
| Add a flattened device tree (fdt) command (2 of 2) |
| |
| Modifications to the existing code to support the new fdt command. |
| |
| commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Mar 31 12:22:10 2007 -0400 |
| |
| Add a flattened device tree (fdt) command (1 of 2) |
| |
| The fdt command uses David Gibson's libfdt library to manipulate as well |
| as print the flattened device tree. This patch is the new command, |
| the second part is the modifications to the existing code. |
| |
| commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Mar 31 12:13:43 2007 -0400 |
| |
| libfdt: Enhanced and published fdt_next_tag() |
| |
| Enhanced the formerly private function _fdt_next_tag() to allow stepping |
| through the tree, used to produce a human-readable dump, and made |
| it part of the published interface. |
| Also added some comments. |
| |
| commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Mar 31 12:05:39 2007 -0400 |
| |
| libfdt: Customizations for use by u-boot. |
| |
| Changes to David Gibson's original source to fit into u-boot's |
| environment. No functionality changes. |
| |
| commit 35748177c64a4a83a00057e93bb33e40278a2a96 |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Mar 31 12:00:56 2007 -0400 |
| |
| libfdt: Import libfdt source (2 of 2) |
| |
| This adds the applicable libfdt source files (unmodified) and a README |
| to explain where the source came from. |
| |
| commit 7cd5da0fe877e7171a4cdd44880bce783132871a |
| Author: Gerald Van Baren <vanbaren@cideas.com> |
| Date: Sat Mar 31 11:59:59 2007 -0400 |
| |
| libfdt: Import libfdt source (1 of 2) |
| |
| This adds the applicable libfdt source files (unmodified) and a README |
| to explain where the source came from. |
| |
| commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 31 13:16:23 2007 +0200 |
| |
| ppc4xx: Update Katmai bootstrap command |
| |
| Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB |
| is selected. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit cabee756a6532986729477c3cc1ea16ef8517ad2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 31 13:15:06 2007 +0200 |
| |
| ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe) |
| |
| Additional RAM information is now printed upon powerup, like |
| DDR2 frequency and CAS latency. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 60723803431ac75cad085690789e433d5ab9174e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 31 08:48:36 2007 +0200 |
| |
| ppc4xx: Change Yucca config file to support ECC |
| |
| With the updated 44x DDR2 driver the Yucca board now supports |
| ECC generation and checking. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 490e5730c674b20d708b783a2c5ffd7208f83873 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 31 08:47:34 2007 +0200 |
| |
| ppc4xx: Fix "bootstrap" command for Katmai board |
| |
| The board specific "bootstrap" command is now fixed and can |
| be used for the AMCC Katmai board to configure different |
| CPU/PLB/OPB frequencies. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 31 08:46:08 2007 +0200 |
| |
| ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe) |
| |
| Fix a bug in the auto calibration routine. This driver now runs |
| more reliable with the tested modules. It's also tested with |
| 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 342cd097be1e7affe82f42ab3da220959a699e64 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 30 22:52:09 2007 +0200 |
| |
| [PATCH] Clean include dependence |
| |
| commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Fri Mar 30 22:42:45 2007 +0200 |
| |
| [CLEAN] Remove inefficient Suzaku code |
| |
| commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 28 15:03:16 2007 +0200 |
| |
| Merge some AMCC make targets to keep the top-level Makefile smaller |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 28 14:52:12 2007 +0200 |
| |
| i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined |
| |
| The "old" i2c commands (iprobe, imd...) are now compiled in again, |
| even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE |
| config option. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Tue Mar 27 00:32:16 2007 +0200 |
| |
| PATCH: Resolve GPL license problem |
| |
| commit ae00bb4b2944dc64a485ed72a19754b11af7c223 |
| Author: Rodolfo Giometti <giometti@enneenne.com> |
| Date: Mon Mar 26 12:03:36 2007 +0200 |
| |
| PXA: pxa27x USB OHCI support |
| |
| Signed-off-by: Rodolfo Giometti <giometti@linux.it> |
| |
| commit ae79f60677c208326535647dcbd5c3ec40dbcb0b |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Mon Mar 26 11:21:05 2007 +0200 |
| |
| USB: remove the S3C24X0_merge #define, which was introduced while |
| merging OHCI drivers. |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 1798049522f594013aea29457d46794298c6ae15 |
| Author: Michal Simek <root@monstr.eu> |
| Date: Mon Mar 26 01:39:07 2007 +0200 |
| |
| Support for XUPV2P board |
| Reset support |
| BSP autoconfig support |
| |
| commit 0d974d5297349504a2ddfa09314be573b5df320a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 24 15:57:09 2007 +0100 |
| |
| [PATCH] Add 4xx GPIO functions |
| |
| This patch adds some 4xx GPIO functions. It also moves some of the |
| common code and defines into a common 4xx GPIO header file. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 24 15:55:58 2007 +0100 |
| |
| [PATCH] Small Sequoia cleanup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Mar 24 15:45:34 2007 +0100 |
| |
| [PATCH] Clean up 40EZ/Acadia support |
| |
| This patch cleans up all the open issue of the preliminary |
| Acadia support. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Dec 12 11:02:20 2006 -0600 |
| |
| Fix 8641HPCN problem with ld version 2.16 |
| |
| (Dot outside sections problem). |
| |
| This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Thu Dec 7 10:35:55 2006 -0600 |
| |
| Set Rev 2.x 86xx PIC in mixed mode. |
| |
| Prevent false interrupt from hanging Linux as MSR[EE] is set |
| to enable interrupts by changing the PIC out of the default |
| pass through mode into mixed mode. |
| |
| Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e |
| Author: Jason Jin <jason.jin@freescale.com> |
| Date: Thu Dec 7 10:32:35 2006 -0600 |
| |
| Add flash cmd function to 8641HPCN ramboot |
| |
| Also fixes some commmand for 8641 HPCN ramboot case. |
| |
| Signed-off-by: Jason Jin <jason.jin@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46 |
| Author: Ed Swarthout <ed.swarthout@freescale.com> |
| Date: Thu Dec 7 10:34:14 2006 -0600 |
| |
| Add support for 8641 Rev 2 silicon. |
| |
| Without this patch, I am unable to get to the prompt on rev 2 silicon. |
| Only set ddrioovcr for rev1. |
| |
| Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 44ba464b99001f8bd1c456a1e9d59726252f707a |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Thu Mar 22 00:13:12 2007 +0100 |
| |
| Code cleanup / re-insert previous Copyright entries. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Mar 21 23:26:15 2007 +0100 |
| |
| Code cleanup. Update CHANGELOG |
| |
| commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 21 14:54:29 2007 +0100 |
| |
| ppc4xx: Fix file mode of include/configs/acadia.h |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d5f4614c9350d9333e575100fb250aab774d0258 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Wed Mar 21 14:41:46 2007 +0100 |
| |
| SPC1920: fix small clock routing bug |
| |
| Signed-off-by: Markus Klotzbuecher <mk@denx.de> |
| |
| commit 16c0cc1c82081a493ab87c51980b28336ce1bce8 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 21 13:39:57 2007 +0100 |
| |
| [PATCH] Add AMCC Acadia (405EZ) eval board support |
| |
| This patch adds support for the new AMCC Acadia eval board. |
| |
| Please note that this Acadia/405EZ support is still in a beta stage. |
| Still lot's of cleanup needed but we need a preliminary release now. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e01bd218b00af73499331a1a701625a852cd286f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 21 13:38:59 2007 +0100 |
| |
| [PATCH] Add AMCC PPC405EZ support |
| |
| This patch adds support for the new AMCC 405EZ PPC. It is in |
| preparation for the AMCC Acadia board support. |
| |
| Please note that this Acadia/405EZ support is still in a beta stage. |
| Still lot's of cleanup needed but we need a preliminary release now. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Wed Mar 21 08:45:17 2007 +0100 |
| |
| [PATCH] TQM8272: dont change the bits given from the HRCW |
| for the SIUMCR and BCR Register. |
| Fix the calculation for the EEprom Size |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 654589873dbafcf104dff133ce0d03a4506e9cc3 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Tue Mar 20 18:16:24 2007 +0800 |
| |
| [Blackfin][PATCH] Add BF561 EZKIT board support |
| |
| commit a6154fd1cfd020f6da8527e0365b1020a11a71d0 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Mon Mar 19 22:55:58 2007 +0800 |
| |
| [Blackfin][PATCH] minor cleanup |
| |
| commit 389b6bb50f745bf5038ce030300d8a8512e96f79 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Mon Mar 19 13:10:08 2007 +0100 |
| |
| Remove obsoleted POST files. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Mon Mar 19 01:26:11 2007 +0800 |
| |
| [PATCH] Add flash chip M29W320ET/B support |
| |
| commit 26bf7deca364a5b33f39e8f14ddd3f4081345015 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Mon Mar 19 01:24:52 2007 +0800 |
| |
| [Blackfin][PATCH] Add BF537 stamp board support |
| |
| commit 8423e5e31a7235d05a482627315fb11d49c17bd7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Mar 16 21:11:42 2007 +0100 |
| |
| [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board |
| |
| Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the |
| DDR memory are dynamically programmed matching the total size |
| of the equipped memory (DIMM modules). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 76d1466f918b881cda2d259254761e73885093c2 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Tue Mar 13 13:38:05 2007 +0100 |
| |
| [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405 |
| boards in terms of unification. |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Mar 13 16:05:55 2007 +0100 |
| |
| Make SC3 board build with 'make O='; use 'addcons' consistently |
| (SC3 and Jupiter used to use 'addcon' instead). |
| |
| Signed-off-by: Wolfgang Denk wd@denx.de |
| |
| commit 8502e30a28e492c756ea2d7df0ace026388fce4b |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Tue Mar 13 09:40:59 2007 +0100 |
| |
| [PATCH] update board config for jupiter Board: |
| added Hush Shell, |
| CONFIG_CMDLINE_EDITING, |
| CFG_ENV_ADDR_REDUND activated |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 0d93de11449390a5984b0236c3612e50f6dbb7e8 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Mon Mar 12 12:11:55 2007 +0800 |
| |
| [Blackfin][PATCH] minor cleanup |
| |
| commit bfa5754a58477ac917d21527cd0f079d87cf188e |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Mon Mar 12 01:42:06 2007 +0800 |
| |
| [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue |
| |
| commit 8440bb14581a294375c34b91b42512f9753d1130 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Mon Mar 12 00:25:14 2007 +0800 |
| |
| [Blackfin][PATCH] code cleanup |
| |
| commit cfc67116a706fd18b8f6a9c11a16753c5626d689 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Mar 11 13:48:24 2007 +0100 |
| |
| [Microblaze][PATCH] part 2 |
| timer support |
| interrupt controller support |
| flash support |
| ethernet support |
| cache support |
| board information support |
| env support |
| booting image support |
| |
| adding support for Xilinx ML401 |
| |
| commit 76316a318de91f6184e7c22a10e02d275ade2441 |
| Author: Michal Simek <monstr@monstr.eu> |
| Date: Sun Mar 11 13:42:58 2007 +0100 |
| |
| [Microblaze][PATCH] |
| timer support |
| interrupt controller support |
| flash support |
| ethernet support |
| cache support |
| board information support |
| env support |
| booting image support |
| |
| adding support for Xilinx ML401 |
| |
| commit 8db13d63157811c839d15a313d9f2d2f5fd10af3 |
| Author: Aubrey Li <aubrey.adi@gmail.com> |
| Date: Sat Mar 10 23:49:29 2007 +0800 |
| |
| [Blackfin][PATCH] code cleanup |
| |
| commit ef26a08fef928b7bc11ae2c109e638dc3a016d91 |
| Author: Aubrey.Li <aubrey.adi@gmail.com> |
| Date: Fri Mar 9 13:40:56 2007 +0800 |
| |
| [Blackfin][PATCH-2/2] Common files changed to support bf533 platform |
| |
| commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f |
| Author: Aubrey.Li <aubrey.adi@gmail.com> |
| Date: Fri Mar 9 13:38:44 2007 +0800 |
| |
| [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support |
| |
| commit 992423ab43c2bcf6b704853bd00af77450915e20 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 8 23:00:08 2007 +0100 |
| |
| ppc4xx: Fix file mode of sequoia.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit eb92f613556800f7483666db09d9a237ad911d4a |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Thu Mar 8 22:52:51 2007 +0100 |
| |
| Minor cleanup. |
| |
| commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1 |
| Author: John Otken john@softadvances.com <john@softadvances.com> |
| Date: Thu Mar 8 09:39:48 2007 -0600 |
| |
| ppc4xx: Clear Sequoia/Rainier security engine reset bits |
| |
| Signed-off-by: John Otken john@softadvances.com <john@softadvances.com> |
| |
| commit 650a330dd2539130c8c324791e2f9f75aed79d4e |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Mar 8 16:26:52 2007 +0100 |
| |
| [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit d9fc703246840c4b268debf48c334ba55c597dc0 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Mar 8 16:25:47 2007 +0100 |
| |
| [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit ced5b9029043397348cdc88e0cfcd6b1f629250b |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Mar 8 16:23:11 2007 +0100 |
| |
| [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit d8a8ea5c476d37006fc7f85b7f903142795c8b14 |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Thu Mar 8 16:20:32 2007 +0100 |
| |
| [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit f9fc6a5852a6335840882fa2111925010eea1abe |
| Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| Date: Wed Mar 7 15:32:01 2007 +0100 |
| |
| fixed ethernet phy configuration for plu405 board |
| |
| Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
| |
| commit 769104c9356594deb2092e204a39c05b33202d6c |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Thu Mar 8 21:49:27 2007 +0100 |
| |
| Minor cleanup |
| |
| commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 8 10:13:16 2007 +0100 |
| |
| [PATCH] Update AMCC Luan 440SP eval board support |
| |
| The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR |
| inititializition. This includes DDR auto calibration and support |
| for different DIMM modules, instead of the fixed setup used in |
| the earlier version. |
| |
| This patch also enables the cache in FLASH for the startup |
| phase of U-Boot (while running from FLASH). After relocating to |
| SDRAM the cache is disabled again. This will speed up the boot |
| process, especially the SDRAM setup, since there are some loops |
| for memory testing (auto calibration). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2f5df47351910a2936c7741cf111855829200943 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 8 10:10:18 2007 +0100 |
| |
| [PATCH] Update AMCC Yucca 440SPe eval board support |
| |
| The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR |
| inititializition. This includes DDR auto calibration and support |
| for different DIMM modules, instead of the fixed setup used in |
| the earlier version. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2721a68a9ea91f1e494649ce68b2577261f578e2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 8 10:07:18 2007 +0100 |
| |
| ppc4xx: Small AMCC Katmai 440SPe update |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit df294497479b1dca6dd86318b2a912f72fede0df |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 8 10:06:09 2007 +0100 |
| |
| ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 83853178bd36bca6f0f8f1331476620c84a587fc |
| Author: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Date: Wed Mar 7 12:14:50 2007 -0600 |
| |
| net - Support ping reply when processing net-loop |
| |
| Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY. |
| |
| This permits the ping command to test the phy interface when the phy |
| is put in loopback mode (typically by setting register 0 bit 14). |
| |
| It also allows the port to respond to an external ping when u-boot is |
| processing some other net command (such as tftp). This is useful when |
| tftp appears to hang. |
| |
| Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit fa1aef15bcd47736687be1af544506e90fba545d |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 7 16:43:00 2007 +0100 |
| |
| [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board |
| |
| Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the |
| DDR memory are dynamically programmed matching the total size |
| of the equipped memory (DIMM modules). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e2ebe696818939e2b974628be9c921ea3fe9de13 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Mar 7 16:39:36 2007 +0100 |
| |
| [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's |
| |
| This patch fixes a problem that occurs when 2 DIMM's are |
| used. This problem was first spotted and fixed by Gerald Jackson |
| <gerald.jackson@reaonixsecurity.com> but this patch fixes the |
| problem in a little more clever way. |
| |
| This patch also adds the nice functionality to dynamically |
| create the TLB entries for the SDRAM (tlb.c). So we should |
| never run into such problems with wrong (too short) TLB |
| initialization again on these platforms. |
| |
| As this feature is new to the "old" 44x SPD DDR driver, it |
| has to be enabled via the CONFIG_PROG_SDRAM_TLB define. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 39218433983417b9df087976a79e3f80dd5e83d6 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Wed Mar 7 16:33:44 2007 +0100 |
| |
| UC101: fix compiler warnings |
| |
| commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Wed Mar 7 16:19:46 2007 +0100 |
| |
| HMI1001: fix build error, cleanup compiler warnings. |
| |
| commit ad5bb451ade552c44bef9119d907929ebc2c126f |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Mar 6 18:08:43 2007 +0100 |
| |
| Restructure POST directory to support of other CPUs, boards, etc. |
| |
| commit a5284efd125967675b2e9c6ef7b95832268ad360 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Mar 6 18:01:47 2007 +0100 |
| |
| Fix HOSTARCH handling. |
| Patch by Mike Frysinger, Mar 05 2007 |
| |
| commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Mar 6 07:47:04 2007 +0100 |
| |
| [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup |
| |
| As provided by the AMCC applications team, this patch optimizes the |
| DDR2 setup for 166MHz bus speed. The values provided are also save |
| to use on a "normal" 133MHz PLB bus system. Only the refresh counter |
| setup has to be adjusted as done in this patch. |
| |
| For this the NAND booting version had to include the "speed.c" file |
| from the cpu/ppc4xx directory. With this addition the NAND SPL image |
| will just fit into the 4kbytes of program space. gcc version 4.x as |
| provided with ELDK 4.x is needed to generate this optimized code. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sun Mar 4 01:36:05 2007 +0100 |
| |
| Some code cleanup. |
| |
| commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Feb 28 00:02:04 2007 -0600 |
| |
| mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings |
| |
| (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit) |
| |
| commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Feb 27 23:51:42 2007 -0600 |
| |
| mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode |
| |
| The config value for: |
| * CFG_ACR_PIPE_DEP |
| * CFG_ACR_RPTCNT |
| * CFG_SPCR_TSEC1EP |
| * CFG_SPCR_TSEC2EP |
| * CFG_SCCR_TSEC1CM |
| * CFG_SCCR_TSEC2CM |
| |
| Were not being used when setting the appropriate register |
| |
| Added: |
| * CFG_SCCR_USBMPHCM |
| * CFG_SCCR_USBDRCM |
| * CFG_SCCR_PCICM |
| * CFG_SCCR_ENCCM |
| |
| To allow full config of the SCCR. |
| |
| Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349 |
| that were just bogus. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit d51b3cf371cd441030460ef19d36b2924c361b1a |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Feb 22 20:06:57 2007 -0600 |
| |
| mpc83xx: update [local-]mac-address properties on UEC based devices |
| |
| 8360 and 832x weren't updating their [local-]mac-address |
| properties. This patch fixes that. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| |
| commit 61f4f912acbe60776c5e00df1ec94094ce672957 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Feb 13 10:41:42 2007 -0600 |
| |
| mpc83xx: write MAC address to mac-address and local-mac-address |
| |
| Some device trees have a mac-address property, some have local-mac-address, |
| and some have both. To support all of these device trees, this patch |
| updates ftp_cpu_setup() to write the MAC address to mac-address if it exists. |
| This function already updates local-mac-address. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 22d71a71f57fd5d38b27ac3848e50d790360a598 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Feb 27 18:41:08 2007 -0600 |
| |
| mpc83xx: add command line editing by default |
| |
| commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Feb 14 19:50:53 2007 -0600 |
| |
| mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers |
| |
| Disable G1TXCLK, G2TXCLK h/w buffers. This patch |
| fixes a networking timeout issue with MPC8360EA (Rev.2) PBs. |
| |
| Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards. |
| |
| Signed-off-by: Kim Phillips <kim.phillips@freescale.com> |
| Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com> |
| |
| commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f |
| Author: Xie Xiaobo <r63061@freescale.com> |
| Date: Wed Feb 14 18:27:17 2007 +0800 |
| |
| mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx |
| |
| The code supply fixed and SPD initialization for MPC83xx DDR2 Controller. |
| it pass DDR/DDR2 compliance tests. |
| |
| Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> |
| |
| commit b110f40bd180c6b560276589beedf753e97c46ce |
| Author: Xie Xiaobo <r63061@freescale.com> |
| Date: Wed Feb 14 18:27:06 2007 +0800 |
| |
| mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS |
| |
| MPC8360E rev2.0 have new spridr,and PVR value, |
| The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM. |
| |
| Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> |
| |
| commit 8d172c0f0d85998a256a95b7459a5403a30380ed |
| Author: Xie Xiaobo <r63061@freescale.com> |
| Date: Wed Feb 14 18:26:44 2007 +0800 |
| |
| mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS |
| |
| MPC8349E rev3.1 have new spridr,and PVR value, |
| The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM. |
| |
| Signed-off-by: Xie Xiaobo<X.Xie@freescale.com> |
| |
| commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b |
| Author: Joakim Tjernlund <joakim.tjernlund@transmode.se> |
| Date: Wed Jan 31 11:04:19 2007 +0100 |
| |
| mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c |
| |
| Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0) |
| which is used to se if an slave will ACK after receiving its address. |
| |
| Correct i2c probing to use this method as the old method could upset |
| a slave as it wrote a data byte to it. |
| |
| Add a small delay in i2c_init() to let the controller |
| shutdown any ongoing I2C activity. |
| |
| Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| |
| commit 7a78f148d6a7298e4fface680dc7eacd877b1aba |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Wed Jan 31 15:54:29 2007 -0600 |
| |
| mpc83xx: Add support for the MPC8349E-mITX-GP |
| |
| Add support for the MPC8349E-mITX-GP, a stripped-down version of the |
| MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in |
| HRCW is 0) for the ITX and a README for the ITX and the ITX-GP. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit fab16807adad350f618024350c6950165c247c72 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Wed Jan 31 15:54:20 2007 -0600 |
| |
| mpc83xx: Delete sdram_init() for MPC8349E-mITX |
| |
| There is no SDRAM on any of the 8349 ITX variants, so function sdram_init() |
| never does anything. This patch deletes it. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit a87c856eb411b9365937d0d4b9c21e46adbe1c14 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Fri Jan 19 10:43:26 2007 +0800 |
| |
| mpc83xx: Fix the LAW1/3 bug |
| |
| The patch solves the alignment problem of the local bus access windows to |
| render accessible the memory bank and PHY registers of UPC 1 (starting at |
| 0xf801 0000). What we actually did was to adjust the sizes of the bus |
| access windows so that the base address alignment requirement would be met. |
| |
| Signed-off-by: Chereji Marian <marian.chereji@freescale.com> |
| Signed-off-by: Gridish Shlomi <gridish@freescale.com> |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 97c4b397dce236a7318b304667bf89e59d08b17c |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jan 30 16:15:31 2007 -0600 |
| |
| mpc83xx: don't hang if watchdog configured on 8360, 832x |
| |
| don't hang if watchdog configured on 8360, 832x |
| |
| The watchdog programming model is the same across all 83xx devices; |
| make the code reflect that. |
| |
| commit b70047478570e371ce7223be342ce98afea0f7d6 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jan 30 16:15:21 2007 -0600 |
| |
| mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt |
| |
| protect memcpy to bad address if a local-mac-address is missing from dt |
| |
| commit 6752ed088c75c26a89b70c46b7326a4cd6015f29 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Jan 30 16:15:04 2007 -0600 |
| |
| mpc83xx: make 8360 default environment fdt be 8360 (not 8349) |
| |
| make 8360 default environment fdt be 8360 (not 8349) |
| |
| commit a28899c910024a0226331df07207b1038c300c93 |
| Author: Emilian Medve <Emilian.Medve@freescale.com> |
| Date: Tue Jan 30 16:14:50 2007 -0600 |
| |
| mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC |
| |
| The problem is not gcc4 but the code itself. The BD_STATUS() macro can't |
| be used for busy-waiting since it strips the 'volatile' property from |
| the bd variable. gcc3 was working by pure luck. |
| |
| This is a follow on patch to "Fix the UEC driver bug of QE" |
| |
| commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Jan 30 14:08:30 2007 -0600 |
| |
| mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead |
| |
| The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all |
| MPC834X class processors. Change the protections from CONFIG_MPC8349 to |
| CONFIG_MPC834X so they are more generic. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit ae246dc6c1937c291014eadd90b6d48c438c7cb0 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Jan 25 13:40:55 2007 -0600 |
| |
| mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL |
| |
| commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Jan 24 17:18:37 2007 -0600 |
| |
| mpc83xx: sort Makefile targets |
| |
| reordered targets alphabetically |
| |
| commit 91e25769771c1164ed63ffca0add49f934ae3343 |
| Author: Paul Gortmaker <paul.gortmaker@windriver.com> |
| Date: Tue Jan 16 11:38:14 2007 -0500 |
| |
| mpc83xx: U-Boot support for Wind River SBC8349 |
| |
| I've redone the SBC8349 support to match git-current, which |
| incorporates all the MPC834x updates from Freescale since the 1.1.6 |
| release, including the DDR changes. |
| |
| I've kept all the SBC8349 files as parallel as possible to the |
| MPC8349EMDS ones for ease of maintenance and to allow for easy |
| inspection of what was changed to support this board. Hence the SBC8349 |
| U-Boot has FDT support and everything else that the MPC8349EMDS has. |
| |
| Fortunately the Freescale updates added support for boards using CS0, |
| but I had to change spd_sdram.c to allow for board specific settings for |
| the sdram_clk_cntl (it is/was hard coded to zero, and that remains the |
| default if the board doesn't specify a value.) |
| |
| Hopefully this should be mergeable as-is and require no whitespace |
| cleanups or similar, but if something doesn't measure up then let me |
| know and I'll fix it. |
| |
| Thanks, |
| Paul. |
| |
| commit 05031db456ab227f3e3752f37b9b812b65bb83ad |
| Author: Sam Song <samsongshu@yahoo.com.cn> |
| Date: Thu Dec 14 19:03:21 2006 +0800 |
| |
| mpc83xx: Remove a redundant semicolon in mpc8349itx.c |
| |
| A redundant semicolon existed in mpc8349itx.c |
| should be removed. |
| |
| Signed-off-by: Sam Song <samsongshu@yahoo.com.cn> |
| |
| commit f35f358241c549be3f75cfe2eaa642914275b7ba |
| Author: Jerry Van Baren <gerald.vanbaren@comcast.net> |
| Date: Wed Dec 6 21:23:55 2006 -0500 |
| |
| mpc83xx: Put the version (and magic) after the HRCW. |
| |
| Put the version (and magic) after the HRCW. This puts it in a fixed |
| location in flash, not at the start of flash but as close as we can get. |
| |
| Signed-off-by: Jerry Van Baren <vanbaren@cideas.com> |
| |
| commit 48aecd969171a6e99a55fae04933857787f9a5bd |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Dec 7 21:14:51 2006 +0800 |
| |
| mpc83xx: Add the MPC832XEMDS board readme |
| |
| Add the MPC832XEMDS board readme |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 24c3aca3f1358b113d3215adb5433b156e99f72b |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Dec 7 21:13:15 2006 +0800 |
| |
| mpc83xx: Add support for the MPC832XEMDS board |
| |
| This patch supports DUART, ETH3/4 and PCI etc. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit e080313c32322e15ab5a18eb896a252858c57284 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Thu Dec 7 21:11:58 2006 +0800 |
| |
| mpc83xx: streamline the 83xx immr head file |
| |
| For better format and style, I streamlined the 83xx head files, |
| including immap_83xx.h and mpc83xx.h. In the old head files, 1) |
| duplicated macro definition appear in the both files; 2) the structure |
| of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The |
| macro definition put inside the each structure. So, I cleaned up the |
| structure of QE immr from immap_83xx.h, deleted the duplicated stuff and |
| moved the macro definition to mpc83xx.h, Just like MPC8260. |
| |
| CHANGELOG |
| |
| *streamline the 83xx immr head file |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0 |
| Author: Dave Liu <r63238@freescale.com> |
| Date: Wed Dec 6 11:38:17 2006 +0800 |
| |
| mpc83xx: Fix the UEC driver bug of QE |
| |
| The patch prevents the GCC tool chain from striping useful code for |
| optimization. It will make UEC ethernet driver workable, Otherwise the |
| UEC will fail in tx when you are using gcc4.x. but the driver can work |
| when using gcc3.4.3. |
| |
| CHANGELOG |
| |
| *Prevent the GCC from striping code for optimization, Otherwise the UEC |
| will tx failed when you are using gcc4.x. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 1 21:11:36 2007 +0100 |
| |
| [PATCH] Update AMCC Katmai 440SPe eval board support |
| |
| This patch updates the recently added Katmai board support. The biggest |
| change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2 |
| driver. |
| |
| Please note, that still some problems are left with some memory |
| configurations. See the driver for more details. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Mar 1 07:03:25 2007 +0100 |
| |
| [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ccbc7036648e465697ca298ba51e0e76dda352a0 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Wed Feb 28 01:28:53 2007 +0100 |
| |
| SC3: fix typo in default environment |
| |
| commit e344568b1b46af85ec32d815586f91bc115d6223 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Tue Feb 27 20:15:30 2007 +0300 |
| |
| MCC200: Fixes for update procedure |
| |
| - fix logic error in image type handling |
| - make sure file system images (cramfs etc.) get stored in flash |
| with image header stripped so they can be mounted through MTD |
| |
| commit 743571145b37182757d4e688a77860b36ee77573 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Feb 27 14:26:04 2007 +0100 |
| |
| Minor code cleanup. |
| |
| commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72 |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Tue Feb 27 12:40:16 2007 +0300 |
| |
| MCC200 update - add LCD Progress Indicator |
| |
| commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Feb 22 07:43:34 2007 +0100 |
| |
| [PATCH] get_dev() now unconditionally uses manual relocation |
| |
| Since the relocation fix is not included yet and we're not sure how |
| it will be added, this patch removes code that required relocation |
| to be fixed for now. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Feb 22 07:40:23 2007 +0100 |
| |
| [PATCH] Change systemace driver to select 8 & 16bit mode |
| |
| As suggested by Grant Likely this patch enables the Xilinx SystemACE |
| driver to select 8 or 16bit mode upon startup. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 3a197b2fe49d6fa03978e60af2394efe9c70b527 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Wed Feb 21 16:52:31 2007 +0100 |
| |
| [PATCH v3] Add sync to ensure flash_write_cmd is fully finished |
| |
| Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command |
| is fully finished. The sync() is defined in each CPU's io.h file. For |
| those CPUs which do not need sync for now, a dummy sync() is defined in |
| their io.h as well. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit da04995c7dc6772013a9a0dc5c767f190c402478 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Feb 21 13:44:34 2007 +0100 |
| |
| [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 751bb57107d78978ae08e697c3deba816f5be091 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 20 13:21:57 2007 +0100 |
| |
| [PATCH] Fix relocation problem with "new" get_dev() function |
| |
| This patch enables the "new" get_dev() function for block devices |
| introduced by Grant Likely to be used on systems that still suffer |
| from the relocation problems (manual relocation neede because of |
| problems with linker script). |
| |
| Hopefully we can resolve this relocation issue soon for all platform |
| so we don't need this additional code anymore. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d93e2212f962668b3dce091ff5edc33f2347fe37 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 20 13:17:42 2007 +0100 |
| |
| [PATCH] Update SystemACE driver for 16bit access |
| |
| This patch removes some problems when the Xilinx SystemACE driver |
| is used with 16bit access on an big endian platform (like the |
| AMCC Katmai). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 874bb7b88fe9b4648e1288a387af2e31014a72f3 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 20 13:15:40 2007 +0100 |
| |
| [PATCH] Clean up Katmai (440SPe) linker script |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 20 10:57:08 2007 +0100 |
| |
| [PATCH] Add support for the AMCC Katmai (440SPe) eval board |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0dc018ece13effc689e47479ea9ebf1c98a507f5 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 20 10:51:26 2007 +0100 |
| |
| [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT |
| |
| This patch switches to the desired I2C bus when the date/dtt |
| commands are called. This can be configured using the |
| CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4037ed3b63923cfcec27f784a89057c3cbabcedb |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 20 10:43:34 2007 +0100 |
| |
| [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support |
| |
| This patch adds support for the DDR2 controller used on the |
| 440SP and 440SPe. It is tested on the Katmai (440SPe) eval |
| board and works fine with the following DIMM modules: |
| |
| - Corsair CM2X512-5400C4 (512MByte per DIMM) |
| - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM) |
| - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM) |
| |
| This patch also adds the nice functionality to dynamically |
| create the TLB entries for the SDRAM (tlb.c). So we should |
| never run into such problems with wrong (too short) TLB |
| initialization again on these platforms. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 36d830c9830379045f5daa9f542ac1c990c70068 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 20 10:35:42 2007 +0100 |
| |
| [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files |
| |
| Since the existing 4xx SPD SDRAM initialization routines for the |
| 405 SDRAM controller and the 440 DDR controller don't have much in |
| common this patch splits both drivers into different files. |
| |
| This is in preparation for the 440 DDR2 controller support (440SP/e). |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Feb 20 10:27:08 2007 +0100 |
| |
| [PATCH] PPC4xx: Add support for multiple I2C busses |
| |
| This patch adds support for multiple I2C busses on the PPC4xx |
| platforms. Define CONFIG_I2C_MULTI_BUS in the board config file |
| to make use of this feature. |
| |
| It also merges the 405 and 440 i2c header files into one common |
| file 4xx_i2c.h. |
| |
| Also the 4xx i2c reset procedure is reworked since I experienced |
| some problems with the first access on the 440SPe Katmai board. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit eb867a76238fb38e952c37871b16d0d7fd61c95f |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:05:45 2007 +0100 |
| |
| [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers |
| |
| Block device read/write is anonymous data; there is no need to use a |
| typed pointer. void * is fine. Also add a hook for block_read functions |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 53758fa20e935cc87eeb0519ed365df753a6f289 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:05:38 2007 +0100 |
| |
| [PATCH 8_9] Add block_write hook to block_dev_desc_t |
| |
| Preparation for future patches which support block device writing |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f4852ebe6ca946a509667eb68be42026f837be76 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:05:31 2007 +0100 |
| |
| [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros |
| |
| Register read/write does not need to be wrapped in a full function. The |
| patch replaces them with macros. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 3a8ce9af6fcb5744a7851b4440c07688acc40844 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:05:23 2007 +0100 |
| |
| [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c |
| |
| The code in this file is not a command; it is a device driver. Put it in |
| the correct place. There are zero functional changes in this patch, it |
| only moves the file. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:05:16 2007 +0100 |
| |
| [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent) |
| |
| This patch is in preparation of additional changes to the sysace driver. |
| May as well take this opportunity to fixup the inconsistent whitespace since |
| this file is about to undergo major changes anyway. |
| |
| There are zero functional changes in this patch. It only cleans up the |
| the whitespace. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 80ba981d940471fe7e539e64fa3d2bd80002beda |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:05:07 2007 +0100 |
| |
| [PATCH 4_4] Remove local implementation of isprint() in ft_build.c |
| |
| isprint is already defined in ctype.c |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit c95c4280d751ca078c2ff58228d2f2b44ccf0600 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:05:00 2007 +0100 |
| |
| [PATCH 3_9] Move buffer print code from md command to common function |
| |
| Printing a buffer is a darn useful thing. Move the buffer print code |
| into print_buffer() in lib_generic/ |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:04:52 2007 +0100 |
| |
| [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets |
| |
| Change the xilinx device drivers and board code to include config.h |
| instead of xparameters.h directly. config.h always includes the |
| correct xparameters file. This change reduces the posibility of |
| including the wrong file when adding a new xilinx board port |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Feb 20 09:04:34 2007 +0100 |
| |
| [PATCH 1_4] Merge common get_dev() routines for block devices |
| |
| Each of the filesystem drivers duplicate the get_dev routine. This change |
| merges them into a single function in part.c |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit f5fcc3c20b65554e98a165542c36ee0c610a2d81 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Mon Feb 19 23:09:51 2007 +0100 |
| |
| MCC200: Software Updater: allow both "ramdisk" and "filesystem" types |
| as root file system images. |
| |
| commit 489c696ae7211218961d159e43e722d74c36fcbc |
| Author: Sergei Poselenov <sposelenov@emcraft.com> |
| Date: Wed Feb 14 14:30:28 2007 +0300 |
| |
| MCC200: Extensions to Software Update Mechanism |
| |
| Update / extend Software Update Mechanism for MCC200 board: |
| |
| - Add support for rootfs image added. The environment variables |
| "rootfs_st" and "rootfs_nd" can be used to override the default |
| values of the image start and end. |
| - Remove excessive key check code. |
| - Code cleanup. |
| |
| commit 4be23a12f23f1372634edc3215137b09768b7949 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Feb 19 08:23:15 2007 +0100 |
| |
| [PATCH] Update Sequoia EBC configuration (NOR FLASH) |
| |
| As spotted by Matthias Fuchs, the READY input should not be |
| enabled for the NOR FLASH on the Sequoia board. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2605e90bf676d48123afe5719a846d2b52b24aac |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Fri Feb 16 07:57:42 2007 +0100 |
| |
| [PATCH] Added support for the jupiter board. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 497d012e5be0194e1084073d0081eb1a844796b2 |
| Author: Gary Jennejohn <garyj@pollux.denx.de> |
| Date: Mon Feb 12 13:11:50 2007 +0100 |
| |
| LPC2292: patch from Siemens. |
| |
| commit b0b1a920aebead0d44146e73676ae9d80fffc8e2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Feb 10 08:49:31 2007 +0100 |
| |
| [PATCH] Add missing p3mx.h file to repository (ups) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Fri Feb 9 10:45:42 2007 +0100 |
| |
| [Motion-PRO] Preliminary support for the Motion-PRO board. |
| |
| commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Feb 7 16:51:08 2007 +0100 |
| |
| [PATCH] Update some AMCC 4xx board config files (set initrd_high) |
| |
| Some boards that can have more than 768MBytes of SDRAM need to |
| set "initrd_high", so that the initrd can be accessed by the |
| Linux kernel. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 7372ca68227930d03cffa548310524cad5b96733 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Feb 2 12:44:22 2007 +0100 |
| |
| [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards |
| |
| Previously the strapping DCR/SDR was read to determine if the internal PCI |
| arbiter is enabled or not. This strapping bit can be overridden, so now |
| the current status is read from the correct DCR/SDR register. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2aa54f651a42d198673318f07a20c89a43e4d197 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Feb 2 12:42:08 2007 +0100 |
| |
| [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Feb 1 13:22:41 2007 +0100 |
| |
| [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file |
| |
| When PCI PNP is enabled the pci pnp configuration routine is called |
| which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some |
| problems with some PCI cards. For now disable the PCI PNP configuration. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 2902fadade3be7659467e8d074048c6b7068f5c0 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 31 16:56:10 2007 +0100 |
| |
| [PATCH] Update 440EPx/440GRx cpu detection |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d5ea287b02a6945c3977410e364a879dd1a555c8 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 31 16:38:04 2007 +0100 |
| |
| [PATCH] Update esd cpci5200 files |
| |
| Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com> |
| |
| commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 31 16:37:34 2007 +0100 |
| |
| [PATCH] Add support for esd mecp5200 board |
| |
| Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com> |
| |
| commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Jan 31 12:38:50 2007 +0100 |
| |
| [PATCH] Remove unneccessary yellowstone board config file |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e802594b6fa1b166308820c276b96dc0d7cc731c |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jan 30 17:06:10 2007 +0100 |
| |
| [PATCH] Update Sequoia (440EPx) config file |
| |
| The config file now handles the 2nd target, the Rainier (440GRx) |
| evaluation board better. Additionally the PPC input clock was |
| adjusted to match the correct value of 33.0 MHz. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 700200c67e73b83751418abe7815840dca8fd6cb |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jan 30 17:04:19 2007 +0100 |
| |
| [PATCH] Merge Yosemite & Yellowstone board ports |
| |
| Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR) |
| share one config file and all board specific files. This way we |
| don't have to maintain two different sets of files for nearly |
| identical boards. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jan 30 15:01:49 2007 +0100 |
| |
| [PATCH] Update Prodrive SCPU (PDNB3 variant) board |
| |
| SCPU doesn't use redundant environment in flash. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6304430ed642ea8fa15c9e5af965ac2e033eec45 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Jan 30 12:51:07 2007 +0100 |
| |
| [PATCH] alpr: Update alpr board config file |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f8db84f132b1e335f20f96138a1f09ed97b08664 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Jan 30 00:50:40 2007 +0100 |
| |
| LPC2292 SODIMM port coding style cleanup. |
| |
| commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3 |
| Author: Gary Jennejohn <garyj@pollux.denx.de> |
| Date: Wed Jan 24 12:16:56 2007 +0100 |
| |
| Add port for the lpc2292sodimm evaluation board from EmbeddedArtists |
| |
| commit 2daf046ba627f85f44195815778140039636244e |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Jan 23 17:22:06 2007 +0100 |
| |
| [iDMR] Add MTD and JFFS2 support, also add default partition definition. |
| |
| commit f7db33101fbc9c8f0a10738ce87034875a17aeb9 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Jan 23 14:21:14 2007 +0100 |
| |
| [iDMR] Flash driver on initialisation write-protects some sectors, |
| currently sectors 0-3. Sector 3 does not need to be protected, though |
| (U-boot occupies sectors 0-1 and the environment sector 2). This commit |
| fixes this, i.e., only sectors 0-2 are protected. |
| |
| commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Jan 23 14:11:22 2007 +0100 |
| |
| [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g., |
| "mii device" results in "Unexpected exception"). Fixing this properly |
| requires some clean-up in the FEC drivers infrastructure for ColdFire, so |
| this commit disables MII commads for now. |
| |
| commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Tue Jan 23 13:25:22 2007 +0100 |
| |
| [ColdFire MCF5271 family] Add CPU detection based on the value of Chip |
| Identification Register (CIR). |
| |
| commit fdef388758506765d4d6a7155c8f1584c63ff581 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Mon Jan 22 13:19:21 2007 +0800 |
| |
| use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP |
| The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007 |
| fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support |
| mpc7448hpc2 board. |
| |
| commit a4012396645533aef218354eeba754dff0deace8 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Fri Jan 19 23:08:39 2007 +0100 |
| |
| Minor code cleanup. |
| |
| commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Fri Jan 19 19:57:10 2007 +0100 |
| |
| [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Fri Jan 19 18:05:26 2007 +0100 |
| |
| [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver |
| if you must swap the bytes between reading/writing. |
| (Needed for the SC3 board) |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jan 18 16:05:47 2007 +0100 |
| |
| [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jan 18 11:54:52 2007 +0100 |
| |
| [PATCH] Update Prodrive P3Mx support |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 34167a36c29ee946b727465db5c014746a08e978 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jan 18 11:48:10 2007 +0100 |
| |
| [PATCH] Add missing Taishan config file |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit cb4820725e9fc409c5cbc8e83054a6ed522d2111 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Thu Jan 18 11:28:51 2007 +0100 |
| |
| [PATCH] Fix: Compilerwarnings for SC3 board. |
| The EBC Configuration Register is now by CFG_EBC_CFG definable |
| Added JFFS2 support for the SC3 board. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd |
| Author: Stefan Roese <sr@denx.de> |
| Date: Thu Jan 18 10:25:34 2007 +0100 |
| |
| [PATCH] Add support for AMCC Taishan PPC440GX eval board |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Jan 16 18:30:50 2007 +0100 |
| |
| Raname solidcard3 into sc3; add redundant env for sc3 |
| |
| commit 1bbbbdd20fcec9933697000dcf55ff7972622596 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Jan 16 12:46:35 2007 +0100 |
| |
| Update default environment for Solidcard3 |
| |
| commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Jan 15 09:46:29 2007 +0100 |
| |
| [PATCH] Fix 440SPe rev B detection from previous patch |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a443d31410c571ee8f970da819a44d698fdd6b1f |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Sun Jan 14 13:35:31 2007 +0100 |
| |
| [FIX] correct I2C Writes for the LM81 Sensor. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 0bba5452835f19a61204edcda3a58112fd8e2208 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sat Jan 13 11:17:10 2007 +0100 |
| |
| Undo commit 3033ebb2: reset command does not take any arguments |
| |
| Haiying Wang's modification to the reset command was broken, undo it. |
| |
| Signed-off-by: Wolfgang Denk <wd@denx.de> |
| |
| commit 95981778cff0038fd9941044d6a3eda810e33258 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 13 08:01:03 2007 +0100 |
| |
| [PATCH] Update 440SP(e) cpu revisions |
| |
| Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 13 07:59:56 2007 +0100 |
| |
| [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed |
| |
| Now the board revision and the current PCI bus speed are printed after |
| the board message. |
| |
| Also the EBC initialising is now done via defines in the board config |
| file. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 36adff362c2c0141ff8a810d42a7e478f779130f |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 13 07:59:19 2007 +0100 |
| |
| [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed |
| |
| Now the board revision and the current PCI bus speed are printed after |
| the board message. |
| |
| Also the EBC initialising is now done via defines in the board config |
| file. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 13 07:57:51 2007 +0100 |
| |
| [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed |
| |
| Now the board revision and the current PCI bus speed are printed after |
| the board message. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ca43ba18e910206ef8063e4b22d282630bff3fd2 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Thu Jan 11 15:44:44 2007 +0100 |
| |
| Added support for the SOLIDCARD III board from Eurodesign |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 6abaee42621c07e81a2cd189ad4368b5e8c50280 |
| Author: Reinhard Thies <Reinhard.Thies@web.de> |
| Date: Wed Jan 10 14:41:14 2007 +0100 |
| |
| Adjusted default environment for cam5200 board. |
| |
| commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Wed Jan 10 15:35:52 2007 +0100 |
| |
| Update CHANGELOG |
| |
| commit 787fa15860a57833e50bd30555079a9cd4e519b8 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Wed Jan 10 01:28:39 2007 +0100 |
| |
| Fix auto_update for MCC200 board. |
| |
| The invocation of do_auto_update() is moved to the end of the |
| misc_init_r() function, after the flash mappings have been |
| initialized. Please find attached a patch that implements that |
| change. |
| |
| Also correct the decoding of the keypad status. With this update, the |
| key that will trigger the update is Column 2, Row 2. |
| |
| commit d9384de2f571046e71081bae22b49e3d5ca2e3d5 |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Wed Jan 10 00:26:15 2007 +0100 |
| |
| CAM5200 flash driver modifications: |
| - use CFI driver (replaces custom flash driver) for main 'cam5200' target |
| - add second build target 'cam5200_niosflash' which still uses custom driver |
| |
| commit 67fea022fa957f59653b5238c7496f80a6b70432 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue Jan 9 16:02:48 2007 +0100 |
| |
| SPC1920: cleanup memory contoller setup |
| |
| commit 8fc2102faa23593c80381437c09f7745a14deb40 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue Jan 9 14:57:14 2007 +0100 |
| |
| Fix the cpu speed setup to work with all boards. |
| |
| commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue Jan 9 14:57:13 2007 +0100 |
| |
| SPC1920: add support for the FM18L08 Ramtron FRAM |
| |
| commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue Jan 9 14:57:13 2007 +0100 |
| |
| SPC1920: update the HPI register addresses to work with the second |
| generation of hardware |
| |
| commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e |
| Author: Markus Klotzbuecher <mk@creamnet.de> |
| Date: Tue Jan 9 14:57:13 2007 +0100 |
| |
| Miscellanious spc1920 related cleanups |
| |
| commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue Jan 9 14:57:12 2007 +0100 |
| |
| SPC1920 GO/NOGO led should be set to color red in U-Boot |
| |
| commit 0be62728aac459ba268d6d752ed49ec0e2bc7348 |
| Author: Markus Klotzbuecher <mk@creamnet.de> |
| Date: Tue Jan 9 14:57:12 2007 +0100 |
| |
| Add support for the DS3231 RTC |
| |
| commit 8139567b60d678584b05f0718a681f2047c5e14f |
| Author: Markus Klotzbuecher <mk@creamnet.de> |
| Date: Tue Jan 9 14:57:11 2007 +0100 |
| |
| SMC1 uses external CLK4 instead of BRG on spc1920 |
| |
| commit d8d9de1a02fbd880b613d607143d1f57342affc7 |
| Author: Markus Klotzbuecher <mk@creamnet.de> |
| Date: Tue Jan 9 14:57:10 2007 +0100 |
| |
| Update the SPC1920 CMB PLD driver |
| |
| commit 3f34f869162750e5e999fd140f884f5de952bcfe |
| Author: Markus Klotzbuecher <mk@creamnet.de> |
| Date: Tue Jan 9 14:57:10 2007 +0100 |
| |
| Add / enable I2C support on the spc1920 board |
| |
| commit d28707dbce1e9ac2017ad051da4133bf22b4204f |
| Author: Markus Klotzbuecher <mk@creamnet.de> |
| Date: Tue Jan 9 14:57:10 2007 +0100 |
| |
| Add support for the tms320671x host port interface (HPI) |
| |
| commit f4eb54529bb3664c3a562e488b460fe075f79d67 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sun Jan 7 00:13:11 2007 +0100 |
| |
| Prepare for release 1.2.0 |
| |
| commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 6 15:58:09 2007 +0100 |
| |
| [PATCH] 44x: Fix problem with DDR controller setup (refresh rate) |
| |
| This patch fixes a problem with an incorrect setup for the refresh |
| timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit f16c1da9577f06c5fc08651a4065537407de4635 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Jan 6 15:56:13 2007 +0100 |
| |
| [PATCH] Update ALPR board files |
| |
| This update brings the ALPR board support to the newest version. |
| It also fixes a problem with the NAND driver. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit cd1d937f90250a32988c37b2b4af8364d25de8ed |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jan 5 11:46:05 2007 +0100 |
| |
| [PATCH] nand: Fix problem with oobsize calculation |
| |
| Here the description from Brian Brelsford <Brian_Brelsford@dell.com>: |
| |
| The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part |
| returns a 0x15. In the code fragment below bits [1:0] determine the |
| page size, it is ANDed via "(extid & 0x3)" then shifted out. The |
| next field is also ANDed with 0x3. However this is a one bit field |
| as defined in the Hynix and Samsung parts in the 4th ID byte that |
| determins the oobsize, not a two bit field. It works on Samsung as |
| bits[3:2] are 01. However for the Hynix there is a 11 in these two |
| bits, so the oob size gets messed up. |
| |
| I checked the correct linux code and the suggested fix from Brian is |
| also available in the linux nand mtd driver. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jan 5 10:40:36 2007 +0100 |
| |
| [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx) |
| |
| This fix will make the MAL burst disabling patch for the Linux |
| EMAC driver obsolete. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 023889838282b6237b401664f22dd22dfba2c066 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Jan 5 10:38:05 2007 +0100 |
| |
| [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board |
| |
| This code will optimize the DDR2 controller setup on a board specific |
| basis. |
| |
| Note: This code doesn't work right now on the NAND booting image for the |
| Sequoia board, since it doesn't fit into the 4kBytes for the SPL image. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit cce4acbb68398634b8d011ed7bb0d12269c84230 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Thu Dec 28 19:08:21 2006 +0100 |
| |
| Few V38B changes: |
| - fix a typo in V38B config file |
| - move watchdog initialisation earlier in the boot process |
| - add "wdt=off" to default kernel command line (disables kernel watchdog) |
| |
| commit 92eb729bad876725aeea908d2addba0800620840 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Wed Dec 27 01:26:13 2006 +0100 |
| |
| Fix bug in adaption of Stefano Babic's CFI driver patch. |
| |
| commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sun Dec 24 01:42:57 2006 +0100 |
| |
| Minor code cleanup. |
| |
| commit d784fdb05900ada3686d5778783e1fb328e9fb66 |
| Author: Stefano Babic <sbabic@denx.de> |
| Date: Tue Dec 12 00:22:42 2006 +0100 |
| |
| Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode) |
| |
| commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Fri Dec 22 14:29:40 2006 +0100 |
| |
| [PATCH] Fix sequoia flash autodetection (finally correct) |
| |
| Now 32MByte and 64MByte FLASH is know to work and other |
| configurations should work too. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 82e5236a8b719543643fd26d5827938ab2b94818 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Fri Dec 22 10:30:26 2006 +0100 |
| |
| Minor code cleanup; update CHANGELOG. |
| |
| commit fa23044564091f05d9695beb7b5b9a931e7f41a4 |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Thu Dec 21 17:17:02 2006 +0100 |
| |
| Added support for the TQM8272 board from TQ |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c |
| Author: Heiko Schocher <hs@pollux.denx.de> |
| Date: Thu Dec 21 16:14:48 2006 +0100 |
| |
| [PATCH] Add support for the UC101 board from MAN. |
| |
| Signed-off-by: Heiko Schocher <hs@denx.de> |
| |
| commit c84bad0ef60e7055ab0bd49b93069509cecc382a |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Dec 20 00:29:43 2006 +0100 |
| |
| Fix to make the baudrate changes immediate for the MCF52x2 family. |
| |
| commit daa6e418bcc0c717752e8de939c213c790286096 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Dec 20 00:27:32 2006 +0100 |
| |
| Preliminary support for the iDMR board (ColdFire). |
| |
| commit cdb97a6678826f85e7c69eae6a1c113d034c9b10 |
| Author: Andrei Safronov <safronov@pollux.denx.de> |
| Date: Fri Dec 8 16:23:08 2006 +0100 |
| |
| automatic update mechanism |
| |
| commit 9d27b3a0685ff99fc477983f315c04d49f657a8a |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Mon Dec 4 17:56:59 2006 +0800 |
| |
| Slight code clean up. |
| Add comments, delete duplicate define and remove spaces. |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Mon Dec 4 17:54:21 2006 +0800 |
| |
| Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original |
| multiplier table can not refect the real PLL clock behavior of these |
| processors. Please refer to the hardware specification for detailed |
| information of the corresponding processors. |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Mon Dec 4 14:46:23 2006 +0800 |
| |
| Remove the static MAC address, ip address, server ip, netmask and |
| gateway ip for network setting. |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Mon Dec 4 14:33:08 2006 +0800 |
| |
| Remove the duplicate memory test code for mpc744ihpc2 board. |
| If a memory test is needed, please use the functions in |
| post/memory.c or memtest command. |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit c9c1eeed7dd193fa65fb194654132040d49d4d3a |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Fri Dec 1 19:01:25 2006 +0800 |
| |
| Fix the exception occuring in RAM table search issue. |
| The original search_one_table() function code can only processes the search |
| for the exception occurring in FLASH/ROM, because the exception and fixup |
| table usually locate in FLASH. If the exception address is also in |
| FLASH, it will be OK. |
| If the exception occurs in RAM, after the u-boot relocation, a |
| relocation offset should be added. |
| |
| clean up the code in cpu/74xx_7xx/cpu.c |
| |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit ee311214e0d216f904feea269599d0934bf71f23 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Fri Dec 1 11:47:36 2006 +0800 |
| |
| Clean up the code according to codestyle: |
| (1) remove some C++ comments. |
| (2) remove trailing white space. |
| (3) remove trailing empty line. |
| (4) Indentation by table. |
| (5) remove {} in one line condition. |
| (6) add space before '(' in function call. |
| Remove some weird printf () output. |
| Add necessary comments. |
| Modified Makefile to support building in a separate directory. |
| |
| commit dd520bf314c7add4183c5191692180f576f96b60 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Thu Nov 30 18:02:20 2006 +0100 |
| |
| Code cleanup. |
| |
| commit 8d9a8610b8256331132227e9e6585c6bd5742787 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Thu Nov 30 01:54:07 2006 +0100 |
| |
| Code cleanup. Update CHANGELOG. |
| |
| commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Wed Nov 29 16:23:42 2006 +0100 |
| |
| [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals |
| |
| The soc node of the mpc52xx needs to be loaded with the IPB bus frequency, |
| not the XLB frequency. |
| |
| This patch depends on the previous patches for MPC52xx device tree support |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| Signed-off-by: Sylvain Munaut <tnt@246tNt.com> |
| |
| commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Nov 29 15:42:37 2006 +0100 |
| |
| [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards |
| |
| This patch adds support for the Prodrive P3M750 (PPC750 & MV64460) |
| and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are |
| quite similar and share the same board directory "prodrive/p3mx" |
| and the same config file "p3mx.h". |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1bdd46832aeb569f5e04b1f20f64318525b6525a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Nov 29 12:53:15 2006 +0100 |
| |
| [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command |
| |
| In the bootvx command the load address was only read from the env |
| variable "loadaddr" and not optionally passed as paramter as described |
| in the help. This is fixed with this patch. The behaviour is now the |
| same as in the bootelf command. |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Nov 29 12:03:57 2006 +0100 |
| |
| [PATCH] include/ppc440.h minor error affecting interrupts |
| |
| Fixed include/ppc440.c for UIC address Bug |
| |
| Corrects bug affecting the addresses for the universal interrupt |
| controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips. |
| |
| Signed-off-by: Jeff Mann <mannj@embeddedplanet.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a |
| Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| Date: Tue Nov 28 16:17:27 2006 -0600 |
| |
| Make fsl-i2c not conflict with SOFT I2C |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 14198bf768fdc958e3c1afd2404e5262208e98d7 |
| Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> |
| Date: Tue Nov 28 16:17:18 2006 -0600 |
| |
| Fix I2C master address initialization. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit cf3d045e51ca8dcc6cf759827140861d6ac25c04 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Nov 28 23:31:19 2006 -0600 |
| |
| Assign maintainers for mpc8349emds and mpc8360emds |
| |
| Dave for mpc8360emds, and me for mpc8349emds. |
| |
| commit 1aa934c81b77f2080d3ca4b226eab67b17a33961 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Tue Nov 28 23:28:33 2006 -0600 |
| |
| Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c |
| |
| give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src |
| since they are passed by reference to ucc_get_cmxucr_reg and assigned. |
| |
| commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Nov 28 12:09:35 2006 -0600 |
| |
| mpc83xx: Miscellaneous code style fixes |
| |
| Implement various code style fixes and similar changes. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Nov 28 17:55:49 2006 +0100 |
| |
| [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux. |
| |
| This patch adds the code and configuration necessary to boot with an |
| arch/powerpc Linux kernel. |
| |
| Signed-off-by: Grant Likely <grant.likely@gmail.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit e732faec95a83cb468b4850ae807c8301dde8f6a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Nov 28 16:09:24 2006 +0100 |
| |
| [PATCH] PPC4xx: 440SP Rev. C detection added |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Nov 28 11:04:45 2006 +0100 |
| |
| [PATCH] nand: Fix patch merge problem |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Nov 28 11:04:45 2006 +0100 |
| |
| [PATCH] nand: Fix patch merge problem |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Mon Nov 27 22:53:53 2006 +0100 |
| |
| Update CHANGELOG |
| |
| commit f6e495f54cdb8fe340b9c03deab40ad746d52fae |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 17:43:25 2006 +0100 |
| |
| [PATCH] 4xx_enet.c: Correct the setting of zmiifer register |
| |
| Patch below corrects the setting of the zmiifer register, it was |
| overwritting the register rather than ORing the settings. |
| |
| Signed-off-by: Neil Wilson <NWilson@airspan.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit d1a72545296800b7e219f93104ad5836f0003d66 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 17:34:10 2006 +0100 |
| |
| [PATCH] Select NAND embedded environment from board configuration |
| |
| The current NAND Bootloader setup forces the environment |
| variables to be in line with the bootloader. This change |
| enables the configuration to be made in the board include |
| file instead so that it can be individually enabled. |
| |
| Signed-off-by: Nick Spence <nick.spence@freescale.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 15784862857c3c2214498defcfed84ff137fb81e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 17:22:19 2006 +0100 |
| |
| [PATCH] nand_wait() timeout fixes |
| |
| Two fixes for the nand_wait() function in |
| drivers/nand/nand_base.c: |
| |
| 1. Use correct timeouts. The original timeouts in Linux |
| source are 400ms and 20ms not 40s and 20s |
| |
| 2. Return correct error value in case of timeout. 0 is |
| interpreted as OK. |
| |
| Signed-off-by: Rui Sousa <rui.sousa@laposte.net> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit da5553b095bf04f4f109ad7e565dae3aba47b230 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 17:04:06 2006 +0100 |
| |
| [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel |
| |
| This patch allows an arch/ppc kernel to be booted by just passing 1 or 2 |
| arguments to bootm. It removes the getenv("disable_of") test that used |
| to be used for this purpose. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit a9398e018593782c5fa7d0741955fc1256b34c1e |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Mon Nov 27 15:32:42 2006 +0100 |
| |
| Minor code cleanup. Update CHANGELOG. |
| |
| commit 1729b92cde575476684bffe819d0b7791b57bff2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 14:52:04 2006 +0100 |
| |
| [PATCH] 4xx: Fix problem with board specific reset code (now for real) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 14:49:51 2006 +0100 |
| |
| [PATCH] alpr: remove unused board specific flash driver |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 14:48:41 2006 +0100 |
| |
| [PATCH] 4xx: Fix problem with board specific reset code |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit ec0c2ec725aec9524a177a77ce75559e644a931a |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 14:46:06 2006 +0100 |
| |
| [PATCH] Remove testing 4xx enet PHY setup |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 27 14:12:17 2006 +0100 |
| |
| [PATCH] Update Prodrive ALPR board support (440GX) |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 58b485776698c3d71ec5a215e392123b4c15afa3 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Mon Nov 27 11:51:21 2006 +0100 |
| |
| Add a small README with information on the generic ohci driver. |
| |
| commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Mon Nov 27 11:46:46 2006 +0100 |
| |
| Fix some endianness issues related to the generic ohci driver |
| |
| commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Mon Nov 27 11:44:58 2006 +0100 |
| |
| Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able |
| to choose between the old and the generic OHCI drivers. |
| |
| commit 53e336e9ffc51035bdc4e5867631b3378761b4df |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Mon Nov 27 11:43:09 2006 +0100 |
| |
| Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver |
| and adapted board configs TQM5200 and yosemite accordingly. This commit |
| also makes the maximum number of root hub ports configurable |
| (CFG_USB_OHCI_MAX_ROOT_PORTS). |
| |
| commit 78d620ebb5871d252270dedfad60c6568993b780 |
| Author: Wolfgang Denk <wd@atlas.denx.de> |
| Date: Thu Nov 23 22:58:58 2006 +0100 |
| |
| Updates for TQM5200 modules: |
| - fix off-by-one error in board/tqm5200/cam5200_flash.c error message |
| - simplify "udate" definitions |
| |
| commit 2053283304eeddf250d109e6791eb6fa4cad14f7 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Wed Nov 22 13:20:50 2006 +0100 |
| |
| [PATCH] PPC4xx start.S: Fix for processor errata |
| |
| Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx |
| errata 1.12: 440_33 by moving patch up in code. |
| |
| Signed-off-by: Jeff Mann <mannj@embeddedplanet.com> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 4ef6251403f637841000e0fef9e832aa01339822 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 20 20:39:52 2006 +0100 |
| |
| [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH |
| |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Mon Nov 20 10:28:30 2006 +0100 |
| |
| Update CHANGELOG |
| |
| commit 260421a21e934a68d31fb6125b0fbd2631a8ca20 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Mon Nov 13 13:55:24 2006 +0100 |
| |
| [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated] |
| |
| * Adds support for AMD command set Top Boot flash geometry reversal |
| * Adds support for reading JEDEC Manufacturer ID and Device ID |
| * Adds support for displaying command set, manufacturer id and |
| device ids (flinfo) |
| * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined |
| * Removes outdated change history (refer to git log instead) |
| |
| Signed-off-by: Tolunay Orkun <listmember@orkun.us> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit b21b511d4c50408f4853f46f06b601272196223f |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sun Nov 12 21:13:23 2006 +0100 |
| |
| Update CHANGELOG |
| |
| commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sat Nov 11 22:48:22 2006 +0100 |
| |
| Disable the watchdog in the default config for the V38B board. |
| |
| commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Sat Nov 11 22:43:00 2006 +0100 |
| |
| Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin |
| group is enabled for USB earlier (in cpu_init_f() instead of |
| usb_lowlevel_init()). |
| |
| commit 91650b3e4de688038d4f71279c44858e3e2c6870 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Mon Nov 6 17:06:36 2006 +0100 |
| |
| Sequential accesses to non-existent memory must be synchronized, |
| at least on G2 cores. |
| |
| This fixes get_ram_size() problems on MPC5200 Rev. B boards. |
| |
| commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Fri Nov 3 19:15:00 2006 -0600 |
| |
| mpc83xx: Update 83xx to use fsl_i2c.c |
| |
| Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete |
| cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files. |
| Added multiple I2C bus support to fsl_i2c.c. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit d239d74b1c937984bc519083a8e7de373a390f06 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Fri Nov 3 12:00:28 2006 -0600 |
| |
| mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR |
| |
| Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx |
| tree matches the other 8xxx trees. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit f7fb2e703ec9688541416962724adff70a7322cb |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Thu Nov 2 19:47:11 2006 -0600 |
| |
| mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c |
| |
| commit 90f30a710a3c619b5405860a686c4ddfc495d4b6 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Thu Nov 2 18:05:50 2006 -0600 |
| |
| mpc83xx: Fix the incorrect dcbz operation |
| |
| The 834x rev1.x silicon has one CPU5 errata. |
| |
| The issue is when the data cache locked with |
| HID0[DLOCK], the dcbz instruction looks like no-op inst. |
| |
| The right behavior of the data cache is when the data cache |
| Locked with HID0[DLOCK], the dcbz instruction allocates |
| new tags in cache. |
| |
| The 834x rev3.0 and later and 8360 have not this bug inside. |
| |
| So, when 834x rev3.0/8360 are working with ECC, the dcbz |
| instruction will corrupt the stack in cache, the processor will |
| checkstop reset. |
| |
| However, the 834x rev1.x can work with ECC with these code, |
| because the sillicon has this cache bug. The dcbz will not |
| corrupt the stack in cache. |
| Really, it is the fault code running on fault sillicon. |
| |
| This patch fix the incorrect dcbz operation. Instead of |
| CPU FP writing to initialise the ECC. |
| |
| CHANGELOG: |
| * Fix the incorrect dcbz operation instead of CPU FP |
| writing to initialise the ECC memory. Otherwise, it |
| will corrupt the stack in cache, The processor will checkstop |
| reset. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Nov 1 00:10:40 2006 -0600 |
| |
| mpc83xx: add OF_FLAT_TREE bits to 83xx boards |
| |
| add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and |
| STDOUT_PATH configuration bits to mpc8349emds, |
| mpc8349itx, and mpc8360emds board code. |
| |
| redo environment to use bootm with the fdtaddr |
| for booting ARCH=powerpc kernels by default, |
| and provide default fdtaddr values. |
| |
| commit 48041365b3420589ad464ebc7752e0053538b729 |
| Author: Kim Phillips <kim.phillips@freescale.com> |
| Date: Wed Nov 1 00:07:25 2006 -0600 |
| |
| mpc83xx: change ft code to modify local-mac-address property |
| |
| Update 83xx OF code to update local-mac-address properties |
| for ethernet instead of the obsolete 'address' property. |
| |
| commit 9ca880a250870a7d55754291b5591d2b5fe89b54 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Oct 31 21:23:16 2006 -0600 |
| |
| mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS |
| |
| This patch also adds an improved I2C set_speed(), which handles all clock |
| frequencies. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit ac4b5622ce050b5ee1e154b98df630d778661632 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Tue Oct 31 19:54:59 2006 -0600 |
| |
| mpc83xx: add the README.mpc8360emds |
| |
| add doc/README.mpc8360emds to accompany the new board support |
| |
| commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Fri Nov 3 12:11:15 2006 -0600 |
| |
| mpc83xx: add QE ethernet support |
| |
| this patch adds support for the QUICC Engine based UCC gigabit ethernet device. |
| |
| commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Fri Nov 3 19:33:44 2006 -0600 |
| |
| mpc83xx: Add MPC8360EMDS basic board support |
| |
| Add support for the Freescale MPC8360EMDS board. |
| Includes DDR, DUART, Local Bus, PCI. |
| |
| commit 23892e49352de74f7fac36ff90bb1be143d195e3 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Tue Oct 31 19:30:40 2006 -0600 |
| |
| mpc83xx: add the QUICC Engine (QE) immap file |
| |
| common QE immap file. Also required for 8360. |
| |
| commit b701652a4992bdcc62fb1a6038a85beef9e55da4 |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Tue Oct 31 19:25:38 2006 -0600 |
| |
| mpc83xx: Add 8360 specifics to 83xx immap |
| |
| Mainly add QE device dependencies, with appropriate 8360 protection. |
| Lindent also run. |
| |
| commit 988833324a7fda482c8ac3ca23eb539f8232e404 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Oct 31 19:14:41 2006 -0600 |
| |
| mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX |
| |
| PREREQUISITE PATCHES: |
| |
| * This patch can only be applied after the following patches have been applied: |
| |
| 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2" |
| 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2" |
| |
| CHANGELOG: |
| |
| * For the 8349E-mITX, fix some size values in pci_init_board(), enable |
| the clock for the 2nd USB board (Linux kernel will hang otherwise), |
| and fix the CONFIG_BOOTARGS macro. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Oct 31 18:44:42 2006 -0600 |
| |
| mpc83xx: Add support for the MPC8349E-mITX |
| |
| PREREQUISITE PATCHES: |
| |
| * This patch can only be applied after the following patches have been applied: |
| |
| 1) DNX#2006090742000024 "Add support for multiple I2C buses" |
| 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x" |
| 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c" |
| 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems" |
| 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems" |
| |
| CHANGELOG: |
| |
| * Add support for the Freescale MPC8349E-mITX reference design platform. |
| The second TSEC (Vitesse 7385 switch) is not supported at this time. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 183da6d9b446cc12123455844ad1187e2375626f |
| Author: Ben Warren <bwarren@qstreams.com> |
| Date: Tue Sep 12 10:15:53 2006 -0400 |
| |
| Additional MPC8349 support for multibus i2c |
| |
| Hello, |
| |
| Here is a patch for a file that was accidentally left out of a previous |
| attempt. |
| |
| It accompanies the patch with ticket DNX#2006090742000024 |
| |
| CHANGELOG: |
| Change PCI initialization to use new multi-bus I2C API. |
| |
| regards, |
| Ben |
| |
| commit b24f119d672b709d153ff2ac091d4aa63ec6877d |
| Author: Ben Warren <bwarren@qstreams.com> |
| Date: Thu Sep 7 16:51:04 2006 -0400 |
| |
| Multi-bus I2C implementation of MPC834x |
| |
| Hello, |
| |
| Attached is a patch implementing multiple I2C buses on the MPC834x CPU |
| family and the MPC8349EMDS board in particular. |
| This patch requires Patch 1 (Add support for multiple I2C buses). |
| Testing was performed on a 533MHz board. |
| |
| /*** Note: This patch replaces ticket DNX#2006083042000027 ***/ |
| |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| CHANGELOG: |
| Implemented driver-level code to support two I2C buses on the |
| MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds |
| are 50kHz, 100kHz and 400kHz on each bus. |
| |
| regards, |
| Ben |
| |
| commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae |
| Author: Ben Warren <bwarren@qstreams.com> |
| Date: Thu Sep 7 16:50:54 2006 -0400 |
| |
| Add support for multiple I2C buses |
| |
| Hello, |
| |
| Attached is a patch providing support for multiple I2C buses at the |
| command level. The second part of the patch includes an implementation |
| for the MPC834x CPU and MPC8349EMDS board. |
| |
| /*** Note: This patch replaces ticket DNX#2006083042000018 ***/ |
| |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| Overview: |
| |
| 1. Include new 'i2c' command (based on USB implementation) using |
| CONFIG_I2C_CMD_TREE. |
| |
| 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that |
| the commands to change bus number and speed are only available under the |
| new 'i2c' command mentioned in the first bullet. |
| |
| 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus |
| systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form |
| of an array of bus-device pairs. Otherwise, it is an array of uchar. |
| |
| CHANGELOG: |
| Added new 'i2c' master command for all I2C interaction. This is |
| conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for |
| setting I2C bus speed as well as changing the active bus if the board |
| has more than one (conditionally compiled with |
| CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses. |
| Updated README. |
| |
| regards, |
| Ben |
| |
| commit bed85caf872714ebf53013967a695c9d63acfc68 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Oct 31 18:13:36 2006 -0600 |
| |
| mpc83xx: Add support for Errata DDR6 on MPC 834x systems |
| |
| CHANGELOG: |
| |
| * Errata DDR6, which affects all current MPC 834x processors, lists changes |
| required to maintain compatibility with various types of DDR memory. This |
| patch implements those changes. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit afd6e470f639883002c7c59d562690a5cb0f4865 |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Wed Oct 25 18:45:23 2006 -0500 |
| |
| mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it |
| |
| commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a |
| Author: Timur Tabi <timur@freescale.com> |
| Date: Tue Aug 22 17:07:00 2006 -0500 |
| |
| mpc83xx: Add support for variable flash memory sizes on 83xx systems |
| |
| CHANGELOG: |
| |
| * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access |
| window registers, instead of using a hard-coded value of 8MB. |
| |
| Signed-off-by: Timur Tabi <timur@freescale.com> |
| |
| commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965 |
| Author: Tanya Jiang <tanya.jiang@freescale.com> |
| Date: Thu Aug 3 18:38:13 2006 +0800 |
| |
| mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros |
| |
| Unified TQM834x variable names with 83xx and consolidated macro |
| in preparation for the 8360 and other upcoming 83xx devices. |
| |
| Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com> |
| |
| commit f6eda7f80ccc13d658020268c507d7173cf2e8aa |
| Author: Dave Liu <daveliu@freescale.com> |
| Date: Wed Oct 25 14:41:21 2006 -0500 |
| |
| mpc83xx: Changed to unified mpx83xx names and added common 83xx changes |
| |
| Incorporated the common unified variable names and the changes in preparation |
| for releasing mpc8360 patches. |
| |
| Signed-off-by: Dave Liu <daveliu@freescale.com> |
| |
| commit 3894c46c27c64891f93ac04edde86a9fa9758d92 |
| Author: Tanya Jiang <tanya.jiang@freescale.com> |
| Date: Thu Aug 3 18:36:02 2006 +0800 |
| |
| mpc83xx: Fix missing build for mpc8349emds pci.c |
| |
| Make pci build for mpc8349emds |
| |
| Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com> |
| |
| commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219 |
| Author: Tanya Jiang <tanya.jiang@freescale.com> |
| Date: Thu Aug 3 18:39:49 2006 +0800 |
| |
| mpc83xx: Removed unused file resetvec.S for mpc83xx cpu |
| |
| Removed unused file resetvec.S for mpc83xx cpu |
| |
| Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com> |
| |
| commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf |
| Author: Nick Spence <Nick.Spence@freescale.com> |
| Date: Sat Sep 30 00:32:59 2006 -0700 |
| |
| NAND Flash verify across block boundaries |
| |
| This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is |
| defined |
| and the write crosses a block boundary. The pointer to the verification |
| buffer (bufstart) is not being updated to reflect the starting of the |
| new |
| block so the verification of the second block fails. |
| |
| CHANGELOG: |
| |
| * Fix NAND FLASH page verification across block boundaries |
| |
| commit f484dc791a3932537213c43c654cc1295c64b84c |
| Author: Nick Spence <nick.spence@freescale.com> |
| Date: Thu Sep 7 07:39:46 2006 -0700 |
| |
| Added RGMII support to the TSECs and Marvell 881111 Phy |
| |
| Added a phy initialization to adjust the RGMII RX and TX timing |
| Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode |
| |
| Signed-off-by: Nick Spence <nick.spence@freescale.com> |
| |
| commit 4831c8b8a97799da77923d6bbb4c260c0d45521c |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Fri Nov 3 13:10:00 2006 +0800 |
| |
| Remove some unused CFG define. |
| undef CFG_DRAM_TEST |
| |
| commit 99c09c4dec34f77c243bf51bea532e3f339410ad |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Fri Nov 3 13:07:36 2006 +0800 |
| |
| Change the TEXT_BASE from 0xFFF00000 to 0xFF000000. |
| Both work. 0xFF000000 seems more reasonable. |
| |
| commit c59200443072353044aa4bf737a5a60f9a9af231 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Thu Nov 2 15:15:01 2006 +0100 |
| |
| Release U-Boot 1.1.6 |
| |
| commit c1fbe4103a0d6c8957f912af902d705ba67836f2 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 19:14:48 2006 +0800 |
| |
| This patch comes from Yuli's posted patch on 8/8/2006 |
| titled "CFI Driver Little-Endian write Issue". |
| |
| http://sourceforge.net/mailarchive/message.php?msg_id=36311999 |
| |
| If that patch applied, please discard this one. |
| Until now , I do not see his patch is applied. So please apply this one. |
| |
| Signed-off-by: Yuli Barcohen <yuli@arabellasw.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit b825f158e449e1e9cf74c08e572955e122394c96 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 19:12:31 2006 +0800 |
| |
| Tsi108 on chip i2c support. |
| |
| The i2c Interface provides a master-only, serial interface that can be |
| used for initializing Tsi108/Tsi109 registers from an EEPROM after a |
| device reset. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 19:11:06 2006 +0800 |
| |
| Tsi108 on chip pci controller support. |
| |
| If there is no pci card, the tsi108/109 pci configure read will |
| cause a machine check exception to the processor. PCI error should |
| also be cleared after the read. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit d1927cee977126e547ceeba23e4f978f377cfb8f |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 19:08:55 2006 +0800 |
| |
| Tundra tsi108 on chip Ethernet controller support. |
| |
| The following is a brief description of the Ethernet controller: |
| The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent |
| Gigabit Ethernet ports,E0 and E1. It uses a single Management interface |
| to manage the two physical connection devices (PHYs). Each Ethernet port |
| has its own statistics monitor that tracks and reports key interface |
| statistics. Each port supports a 256-entry hash table for address |
| filtering. In addition, each port is bridged to the Switch Fabric |
| through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO. |
| |
| Each Ethernet port also has a pair of internal Ethernet DMA channels to |
| support the transmit and receive data flows. The Ethernet DMA channels |
| use descriptors set up in memory, the memory map of the device, and |
| access via the Switch Fabric. The Ethernet Controller?s DMA arbiter |
| handles arbitration for the Switch Fabric. The Controller also |
| has a register businterface for register accesses and status monitor |
| control. |
| |
| The PMD (Physical Media Device) interface operates in MII, GMII, or TBI |
| modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs. |
| The GMII and TBI modes are used to connect with Gigabit PMDs. Internal |
| data flows to and from the Ethernet Controller through the Switch Fabric. |
| |
| Each Ethernet port uses its transmit and receive DMA channels to manage |
| data flows through buffer descriptors that are predefined by the |
| system (the descriptors can exist anywhere in the system memory map). |
| These descriptors are data structures that point to buffers filled |
| with data ready to transmit over Ethernet, or they point to empty |
| buffers ready to receive data from Ethernet. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 19:01:33 2006 +0800 |
| |
| Tundra tsi108 header file. |
| |
| The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for |
| PowerPC processors that offers numerous system interconnect options for |
| embedded application designers. The Tsi108 can interconnect 60x or |
| MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet, |
| and Flash. Provided the macro define for tsi108 chip. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 87c4db09699c6b89176b31004afcb83eb1585d47 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 18:59:15 2006 +0800 |
| |
| Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support. |
| mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 27801b8ab11c61b577e45742a515bb3b23b80241 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 18:57:21 2006 +0800 |
| |
| Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support. |
| Make ,config.mk and link file for the mpc7448hpc2 board. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 18:55:04 2006 +0800 |
| |
| Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support. |
| The mpc7448hpc2 board support header file. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 625bb5ddb50b243f931262ca8c46956409471917 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 18:52:21 2006 +0800 |
| |
| Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support. |
| The mpc7448hpc2 board support low level assemble language init code. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 4c52783b3d024e153c4972b97332e314bc3bdc46 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 18:49:51 2006 +0800 |
| |
| General code modification for mpc7448hpc2 board support. |
| 1. Add 7447A and 7448 processor support. |
| 2. Add the following flags. |
| |
| CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically |
| (such as by switch on board), this flag should be set. |
| |
| CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot |
| relocates to RAM, this flag should be set. |
| |
| CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the |
| system hang in exception, this flag should be set. |
| |
| There is a design issue for tsi108/109 pci configure read. When pci scan |
| the slots, if there is no pci card, the tsi108/9 will cause a machine |
| check exception for mpc7448 processor. |
| |
| Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695 |
| Author: roy zang <tie-fei.zang@freescale.com> |
| Date: Thu Nov 2 18:34:47 2006 +0800 |
| |
| Add README file for mpc7448hpc2 board. |
| Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> |
| |
| commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Nov 1 02:04:38 2006 +0100 |
| |
| Finish up support for MarelV38B board |
| - add watchdog support |
| - enable GPIO_WKUP_7 pin for input |
| - code cleanup |
| |
| commit ffa150bc90c943ca265170bd1be3f293674dd5c7 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Nov 1 01:45:46 2006 +0100 |
| |
| - Fix issues related to the use of ELDK 4 when compiling for MarelV38B: |
| * remove warnings when compiling ethaddr.c |
| * adjust linker script (fixes a crash resulting from incorrect |
| definition of __u_boot_cmd_start) |
| - Some MarelV38B code cleanup. |
| |
| commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Nov 1 01:38:16 2006 +0100 |
| |
| - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the |
| MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's |
| Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with |
| MPC5XXX_WU_GPIO_DATA_O for affected boards. |
| |
| - Add defintions for some MPC5XXX GPIO pins. |
| |
| commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8 |
| Author: Bartlomiej Sieka <tur@semihalf.com> |
| Date: Wed Nov 1 01:34:29 2006 +0100 |
| |
| Changed MarelV38B board make target to lowercase. Config file cleanup. |
| |
| commit 1954be6e9c9421b45d0a9d05b10356acc7563150 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sun Oct 29 01:03:51 2006 +0200 |
| |
| Automatically adjust ARFLAGS so "make -s" is really silent. |
| |
| commit fae684e89844856383bdf101440889557df3e6b1 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 28 16:45:00 2006 +0200 |
| |
| [PATCH] omap925.c: Remove unused functions |
| |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 28 17:12:58 2006 +0200 |
| |
| [PATCH] Add some missing machtypes for netstar & voiceblue boards |
| |
| Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of |
| numbers in code. |
| |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 856f054410cef52d868feb330168b2a4c4091328 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 28 15:55:52 2006 +0200 |
| |
| [PATCH] NAND: Partition name support added to NAND subsystem |
| |
| chpart, nboot and NAND subsystem related commands now accept also partition |
| name to specify offset. |
| |
| Signed-off-by: Ladislav Michl <ladis@linux-mips.org> |
| Signed-off-by: Stefan Roese <sr@denx.de> |
| |
| commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sat Oct 28 02:29:44 2006 +0200 |
| |
| Update CHANGELOG. |
| |
| commit 2751a95abd1b96911081c357e96a12fa97b40dee |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sat Oct 28 02:29:14 2006 +0200 |
| |
| Enable commandline editing and hush shell on all TQM boards. |
| |
| commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sat Oct 28 02:28:02 2006 +0200 |
| |
| README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE |
| |
| commit 471a7be7a042e95e440f5de969c9765214ae8d6e |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Sat Oct 28 01:14:32 2006 +0200 |
| |
| Check for illegal character '=' in environment variable names. |
| |
| Make sure the string passed as variable name does not contain a '=' |
| character. This not only prevents the common error or typing |
| "setenv foo=bar" instead of "setenv foo bar", but (more importantly) |
| also closes a backdoor which allowed to delete write-protected |
| environment variables, for example by using "setenv ethaddr=". |
| |
| commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Sat Oct 28 00:38:39 2006 +0200 |
| |
| Minor code cleanup. |
| |
| commit e11887a77d81077416a2d1c5e0354916fee8c034 |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Thu Oct 26 17:55:31 2006 +0200 |
| |
| Don't pass any debug options directly to the assembler |
| |
| When passing the -g option to gcc, gcc automatically selects a |
| suitable --g<format> option to pass on to the assembler. |
| Thus, there's no point in forcing a specific debug option on the |
| assembler using the -Wa mechanism. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Oct 27 07:47:22 2006 -0500 |
| |
| MPC86xx: Cleaned up unused and conditionally used local variables. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Fri Oct 27 11:55:21 2006 +0200 |
| |
| Fix "ar" flags in some Makefiles to allow for silent "make -s" |
| |
| commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f |
| Author: Ben Warren <bwarren@qstreams.com> |
| Date: Thu Oct 26 14:38:25 2006 -0400 |
| |
| Fix TSEC driver (now for real): avoid crashes if PHY is not attached |
| to a TSEC (e.g. a switch is connected via RMII) or |
| if the PHY is defective/incorrectly configured. |
| |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999 |
| Author: Ben Warren <bwarren@qstreams.com> |
| Date: Thu Oct 26 14:38:25 2006 -0400 |
| |
| Fix TSEC driver: avoid crashes if PHY is not attached |
| to a TSEC (e.g. a switch is connected via RMII) or |
| if the PHY is defective/incorrectly configured. |
| |
| Signed-off-by: Ben Warren <bwarren@qstreams.com> |
| |
| commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Thu Oct 26 16:24:31 2006 +0200 |
| |
| Code cleanup. |
| |
| commit 5e3b0bc19f07ed277d85324ad0427642c8981baf |
| Author: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| Date: Wed Oct 25 15:48:59 2006 +0200 |
| |
| Finish up support for the ATSTK1000/ATSTK1002 boards |
| |
| Add atstk1002_config target to Makefile and move the AVR32 section |
| down below Blackfin so that it doesn't end up in the middle of |
| MIPS. |
| |
| Drop the autogenerated linker script thing for now. Will have to |
| revisit how to handle chips with different flash and RAM layout |
| later. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4 |
| Author: Kumar Gala <galak@kernel.crashing.org> |
| Date: Tue Oct 24 23:47:37 2006 -0500 |
| |
| Added support for Multi-Image files that contain a device tree |
| |
| If a Multi-Image file contains a third image we try to use it as a |
| device tree. The device tree image is assumed to be uncompressed in the |
| image file. We automatically allocate space for the device tree in memory |
| and provide an 8k pad to allow more than a reasonable amount of growth. |
| |
| Additionally, a device tree that was contained in flash will now automatically |
| get copied to system memory as part of boot. Previously an error was |
| reported if one tried to boot a device tree that was in flash. |
| |
| Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| |
| commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512 |
| Author: Wolfgang Denk <wd@denx.de> |
| Date: Tue Oct 24 21:35:55 2006 +0200 |
| |
| Switch to automatically generated CHANGELOG file. |
| (use "make CHANGELOG" to update it from time to time) |
| |
| commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 24 18:06:48 2006 +0200 |
| |
| Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c |
| Patch by Stefan Roese, 24 Oct 2006 |
| |
| commit 8ae3b713b2286e0c3213b7802062e4c1599010de |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 17:24:55 2006 +0200 |
| |
| Merge with /home/wd/git/u-boot/master |
| |
| commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 15:32:57 2006 +0200 |
| |
| Code cleanup |
| |
| commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 14:51:36 2006 +0200 |
| |
| Move atstk1000 files into vendor specific directory. |
| Patch by Haavard Skinnemoen, 12 Sep 2006 |
| |
| commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 14:42:37 2006 +0200 |
| |
| Add ATSTK1000 and ATSTK1002 board support |
| Patch by Haavard Skinnemoen, 06 Sep 2006 |
| |
| This patch adds support for the ATSTK1000 with the ATSTK1002 CPU |
| daughterboard. |
| |
| ATSTK1000 is a full-featured development board for AT32AP CPUs. It |
| has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker, |
| and connectors for USART, PS/2, VGA, USB, MMC/SD cards and |
| CompactFlash cards. For more information, please see this page: |
| |
| http://www.atmel.com/dyn/products/tools.asp?family_id=682 |
| |
| The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the |
| AT32AP7000 chip. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit f93ae788c3640fcde5db383471d45548ff4060d0 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 14:31:24 2006 +0200 |
| |
| Add common serial driver for Atmel AT32 and AT91 chips |
| Patch by Haavard Skinnemoen, 06 Sep 2006 |
| |
| This is a first attempt at creating a common serial driver for Atmel |
| chips. For now, it supports the AT32AP7000 AVR32 chip, but it should |
| be possible to support AT91RM9200 and other ARM-based chips with some |
| minor modifications. |
| |
| There's nothing fundamentally AVR32-specific in this driver, but it |
| does use some features which are currently only defined for the |
| AT32AP CPU port: |
| * pm_get_clock_freq: Obtain the clock frequency of a given domain |
| * gd->console_uart: A "struct device" containing information about |
| register mappings, gpio resources and clocks associated with the |
| UART device. |
| |
| For more information about these features, please see the "AT32AP |
| CPU" patch. |
| |
| commit 72a087e04705c26cad982879ebd06b5281bf825a |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 14:27:35 2006 +0200 |
| |
| Add AT32AP CPU and AT32AP7000 SoC support |
| Patch by Haavard Skinnemoen, 06 Sep 2006 |
| |
| This patch adds support for the AT32AP CPU family and the AT32AP7000 |
| chip, which is the first chip implementing the AVR32 architecture. |
| |
| The AT32AP CPU core is a high-performance implementation featuring a |
| 7-stage pipeline, separate instruction- and data caches, and a MMU. |
| For more information, please see the "AVR32 AP Technical Reference": |
| |
| http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf |
| |
| In addition to this, the AT32AP7000 chip comes with a large set of |
| integrated peripherals, many of which are shared with the AT91 series |
| of ARM-based microcontrollers from Atmel. Full data sheet is |
| available here: |
| |
| http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 7b64fef33c66be648826c0ff9758298ef13d0604 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 14:21:16 2006 +0200 |
| |
| Add AVR32 architecture support |
| Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200 |
| |
| This patch adds common infrastructure code for the Atmel AVR32 |
| architecture. See doc/README.AVR32 for details. |
| |
| Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| |
| commit 2da2d9a4766063b9848f3a35ad6025499cf87265 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 13:57:33 2006 +0200 |
| |
| Use -g instead of -gstabs in AFLAGS_DEBUG |
| Patch by Haavard Skinnemoen, 30 Aug 2006 |
| |
| In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no |
| matter what the target's preferred debugging format is. This patch |
| simply replaces -gstabs with -g, so that the default debugging format |
| for the architecture is used. |
| |
| commit 965829872169c2996023840d98e1d85ad148d629 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Tue Oct 24 13:55:18 2006 +0200 |
| |
| Fix/workaround broken dependency handling with make 3.81 |
| Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200 |
| |
| commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a |
| Author: Marian Balakowicz <m8@semihalf.com> |
| Date: Mon Oct 23 22:17:05 2006 +0200 |
| |
| Fix sequoia separate object direcory building problems. |
| |
| commit 3dfa9cfdcee78b30da3432318b32821ffabe974b |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Oct 20 17:16:35 2006 -0500 |
| |
| Use generic I2C register block on 85xx and 86xx. |
| |
| Replace private IMMAP I2C structures with generic reg block |
| and allow 86xx to have multiple I2C device busses. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Oct 20 15:54:34 2006 -0500 |
| |
| Fix compilation warnings on a few 85xx boards. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 2047672684cf85cb6f96a1fbc993180aaaf19a99 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Oct 20 15:50:15 2006 -0500 |
| |
| Converted all 85xx boards to use a common FSL I2C driver. |
| Introduced COFIG_FSL_I2C to select the common FSL I2C driver. |
| And removed hard i2c path from a few u-boot.lds scipts too. |
| Minor whitespace cleanups along the way. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4d45f69e362b05892c9e92a7907e5820995612aa |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Oct 19 12:02:24 2006 -0500 |
| |
| Rewrite a series of goto statements as a sequences of |
| conditional expressions instead. |
| |
| Use consistent return code 0/-1 for good/bad indicators. |
| |
| Include one fewer file if the driver isn't used at all. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 7237c033b02fe295880435f1eb80819a0c987532 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Oct 19 11:02:16 2006 -0500 |
| |
| Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c |
| |
| in an effort to begin to unify the umpteen FSL I2C drivers that |
| are all otherwise very similar. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Oct 19 11:33:52 2006 -0500 |
| |
| * Fix a bunch of compiler warnings for gcc 4.0 |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Oct 17 06:14:31 2006 +0200 |
| |
| Add monitor functions for indirect access to PPC440 DCR's |
| Patch by Leonid Baryudin, 12 Oct 2006 |
| |
| commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Fri Oct 13 16:47:53 2006 -0500 |
| |
| Fixed leading whitespace issues. |
| Removed spurious LAWAR thing. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Oct 12 10:42:36 2006 -0500 |
| |
| Remove unneeded include files and local variable. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5 |
| Author: Grant Likely <grant.likely@secretlab.ca> |
| Date: Tue Oct 10 00:23:32 2006 -0600 |
| |
| Fix possible uninitialized variable compiler warning. |
| |
| When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in |
| do_bootm_linux() may be uninitialized. There is no possibility in the |
| current code that len will get used uninitialized, but this fix follows |
| the existing convention of setting both len and data to zero at the same |
| time. |
| |
| Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| |
| commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Oct 11 15:13:01 2006 -0500 |
| |
| * Fix a bunch of compiler warnings for gcc 4.0 |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit bf651baa365e5447246aad6a633ccd667cf24a39 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Oct 11 10:10:43 2006 -0500 |
| |
| Move "ar" flags to config.mk to allow for silent "make -s" |
| |
| commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 10 17:19:03 2006 -0500 |
| |
| Coding style changes to remove local varible blocks |
| and reformat a bit nicer. |
| |
| commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 10 17:16:04 2006 -0500 |
| |
| Fix whitespace issues. |
| |
| commit 7b382b7125f2397cce63253df62f183e3dfa2770 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 10 17:14:45 2006 -0500 |
| |
| Fix whitespace issues. |
| |
| commit e10390ddd736b0dad1528eec4b0fe35c0827139a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 10 17:06:53 2006 -0500 |
| |
| Fix whitespace issues. |
| |
| commit 89875e96ba3f023157bf50d5f8e33bf254964a76 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 10 17:03:43 2006 -0500 |
| |
| Ran lindent and cleaned up whitespace issues. |
| Format for 80-columns too. |
| |
| commit 333961ae7095fc66d8a041fce1ac9ee873b09d86 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Oct 10 17:02:22 2006 -0500 |
| |
| Fix whitespace and 80-col issues. |
| |
| commit 5c912cb1c31266c66ca59b36f9b6f87296421d75 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 7 11:36:51 2006 +0200 |
| |
| CFG_NAND_QUIET_TEST added to not warn upon missing NAND device |
| Patch by Stefan Roese, 07 Oct 2006 |
| |
| commit 5bc528fa4da751d472397b308137238a6465afd2 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 7 11:35:25 2006 +0200 |
| |
| Update ALPR code (NAND support working now) |
| Patch by Stefan Roese, 07 Oct 2006 |
| |
| commit 77d5034847d328753b80c46b83f960a14a26f40e |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 7 11:33:03 2006 +0200 |
| |
| Remove compile warnings in fpga code |
| Patch by Stefan Roese, 07 Oct 2006 |
| |
| commit f3443867e90d2979a7dd1c65b0d537777e1f9850 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Sat Oct 7 11:30:52 2006 +0200 |
| |
| Add CONFIG_BOARD_RESET to configure board specific reset function |
| Patch by Stefan Roese, 07 Oct 2006 |
| |
| commit f55df18187e7a45cb73fec4370d12135e6691ae1 |
| Author: John Traill <john.traill@freescale.com> |
| Date: Fri Sep 29 08:23:12 2006 +0100 |
| |
| Fix missing tCycle/modfreq calculation. |
| |
| Signed-off-by: John Traill <john.traill@freescale.com> |
| |
| commit 8272dc2f58f2473d8995fcc9b916440cfba080f0 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Sep 13 10:33:35 2006 -0500 |
| |
| Updated config headers to add default FDT-based booting |
| |
| commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Sep 13 10:34:18 2006 -0500 |
| |
| Add support for eTSEC 3 & 4 on 8548 CDS |
| |
| * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS. |
| This will only work on rev 1.3 boards (but doesn't break older boards) |
| * Cleaned up some comments to reflect the expanded role of tsec |
| in other systems |
| |
| commit 084d648b109c8984f83674043c1a7fa3885ef801 |
| Author: Andy Fleming <afleming@freescale.com> |
| Date: Wed Sep 13 10:33:56 2006 -0500 |
| |
| Added code to support 2.6.18 PCI changes in u-boot |
| |
| * Added code to swizzle the IRQ map for the PCI |
| |
| commit afbdc649f8751e4f4f1a6f527edfe139773f2c15 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Sep 19 09:34:10 2006 -0500 |
| |
| Modified makefile for new build mechanism. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit d14ba6a798beb753e7a864500414fcc2d198b8bc |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Sep 14 08:40:36 2006 -0500 |
| |
| Handle 86xx SVR values according to the new Reference Manual. |
| Both 8641 and 8641D have SVR == 0x8090, and are distinguished |
| by the byte in bits 16-23 instead. |
| Thanks to Jason Jin for noticing. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7 |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Mon Aug 28 14:25:31 2006 +0800 |
| |
| Fixed an OF-tree off-by-one bug when adding a new property name. |
| This bug will cause the kernel booting to pause a long time. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit) |
| |
| commit 9bff7a69a885adebbd2bd45990494ec4cf998a30 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 29 11:05:09 2006 -0500 |
| |
| Remove trailing empty lines. |
| |
| commit cd6d73d5b895a5935ac4fde0a356288142a584e0 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 29 09:48:49 2006 -0500 |
| |
| Remove bogus msync and use volatile asm. |
| |
| commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 29 08:17:14 2006 -0500 |
| |
| Add myself as maintainer for MPC8641HPCN. |
| |
| commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Mon Aug 28 14:25:31 2006 +0800 |
| |
| Fixed an OF-tree off-by-one bug when adding a new property name. |
| This bug will cause the kernel booting to pause a long time. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit 5567806b67d0ae83493aa8823ad3b6c914f581d7 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Fri Aug 25 14:38:34 2006 -0400 |
| |
| Change ramdiskaddr and dtbaddr |
| Remove PEX fluff commands. |
| |
| Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Aug 23 13:32:45 2006 -0500 |
| |
| * Another small fix for booting with disable_of |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Aug 23 11:04:43 2006 -0500 |
| |
| Cleanup and lindent new AHCI driver. |
| |
| commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de |
| Author: Jin Zhengxiong <jason@bus.ap.freescale.net> |
| Date: Wed Aug 23 19:15:12 2006 +0800 |
| |
| Add AHCI define and sata support for MPC8641HPCN board. |
| |
| Signed-off-by:Jason Jin<jason.jin@freescale.com> |
| |
| commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4 |
| Author: Jin Zhengxiong <jason@bus.ap.freescale.net> |
| Date: Wed Aug 23 19:10:44 2006 +0800 |
| |
| Add AHCI support to u-boot |
| |
| Add AHCI support in u-boot, enable the sata disk controllers which |
| following the AHCI protocol. |
| |
| Signed-off-by:Jason Jin<jason.jin@freescale.com> |
| |
| commit d8ea2acf5f137cae99417df4f573d036ee384668 |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Wed Aug 23 17:54:32 2006 +0800 |
| |
| Add dtb boot-up parameter to default boot commands. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit b93775c2036b99baa390ea425c4771895bbc63c4 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 22 18:26:08 2006 -0500 |
| |
| Cleanup even more poorly introduced whitespace. |
| |
| commit ae6241685cbcf0c79a3636530d2ceab1fb291a94 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 22 18:07:00 2006 -0500 |
| |
| Cleanup more poorly introduced whitespace. |
| |
| commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 22 17:54:05 2006 -0500 |
| |
| Cleanup poorly introduced whitespace. |
| |
| commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 22 12:25:27 2006 -0500 |
| |
| General indent and whitespace cleanups. |
| |
| commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 22 12:06:18 2006 -0500 |
| |
| General indent and whitespace cleanups. |
| |
| commit 41a0e8b304d3ff55fe27a230507aac79684016ac |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue Aug 22 10:42:21 2006 -0500 |
| |
| Cleanup compiler warnings. |
| |
| commit 5de62c47a8628b3da4d73f7c07027f32a3342d40 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Tue Aug 22 09:31:59 2006 -0500 |
| |
| Fix disable_of booting |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit 87a449c8ac396420cb24260f717ea9e6faa82047 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Tue Aug 22 09:23:55 2006 -0500 |
| |
| Support for FDT in uImage format, error when using FDT from flash |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit 75c299c38369d01addd5e054b8a16217b70f4a86 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Tue Aug 15 15:12:55 2006 -0400 |
| |
| Unlock cache before kernel starts up for MPC86xx |
| |
| commit 67256678f00c09b0a7f19e862e5c1847553d31bc |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Tue Aug 15 15:13:15 2006 -0400 |
| |
| Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR |
| |
| commit 1c8f6d8fb028f156094d05f2d14298e6479364ac |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Tue Aug 15 15:12:55 2006 -0400 |
| |
| Unlock cache before kernel starts up for MPC86xx |
| |
| commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Tue Aug 15 15:13:15 2006 -0400 |
| |
| Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR |
| |
| commit 86c8e17f25e972a7e272950a0735fad84e082b88 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Aug 16 13:59:47 2006 -0500 |
| |
| * Fix disable_of booting |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit 25c751e9adc86e22fe3b5b47cf2806379b575db7 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Aug 16 10:54:09 2006 -0500 |
| |
| * Support for FDT in uImage format, error when using FDT from flash |
| |
| Signed-off-by: Matthew McClintock <msm@freescale.com> |
| |
| commit 899620c2d66d4eef3b2a0034d062e71d45d886c9 |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 15 14:22:35 2006 +0200 |
| |
| Add initial support for the ALPR board from Prodrive |
| NAND needs some additional testing |
| Patch by Heiko Schocher, 15 Aug 2006 |
| |
| commit f0ff4692ff3372dec55074a8eb444943ab095abb |
| Author: Stefan Roese <sr@denx.de> |
| Date: Tue Aug 15 14:15:51 2006 +0200 |
| |
| Add FPGA Altera Cyclone 2 support |
| Patch by Heiko Schocher, 15 Aug 2006 |
| |
| commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon Aug 14 15:33:38 2006 -0500 |
| |
| Fix BAT0 to actually be cacheable, non-guarded as documented. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 40bc83559db5745681909fd7382ae509567e116d |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Aug 9 15:32:16 2006 -0500 |
| |
| Removed MPC8641HPCN DTS source file from build. |
| It is no longer linked into U-Boot; its sources are |
| now located in the kernel tree. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:47:03 2006 -0500 |
| |
| * Switched default PCI speed for 8540 ADS back to 33MHz |
| |
| * Added comments and a printf to warn that PCI-X won't |
| work at 33MHz |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:46:35 2006 -0500 |
| |
| * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:46:13 2006 -0500 |
| |
| * Added VIA configuration table |
| |
| * Added support for PCI2 on CDS |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit c88f9fe66b64247e5b6a38410ba315ca25596d16 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:45:41 2006 -0500 |
| |
| * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 97074ed9655309b64231bc2cee69fe85399f8055 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:45:17 2006 -0500 |
| |
| * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:44:49 2006 -0500 |
| |
| * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit a4e11558b810ef2cddffdf7b9d86bc1130441960 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:44:23 2006 -0500 |
| |
| * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:43:36 2006 -0500 |
| |
| * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006 |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:43:00 2006 -0500 |
| |
| * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006 |
| |
| commit 5498d90312aad9f6bdbf047986027c35b03cd163 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:42:24 2006 -0500 |
| |
| * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006 |
| |
| commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:41:37 2006 -0500 |
| |
| * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006 |
| |
| commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a |
| Author: John Traill <john.traill@freescale.com> |
| Date: Wed Aug 9 14:33:50 2006 +0100 |
| |
| Add Rapidio support for the MPC8641HPCN |
| |
| Signed-off-by: John Traill <john.traill@freescale.com> |
| |
| commit 91a414c7d1fb0eac912592cd995b30c9f23045c9 |
| Author: John Traill <john.traill@freescale.com> |
| Date: Tue Aug 8 11:32:43 2006 +0100 |
| |
| Fix caslat calculation |
| |
| Signed-off-by: John Traill <john.traill@freescale.com> |
| |
| commit 709d3073e74153278e7904a70819bbef7df50e1a |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Aug 3 16:17:56 2006 -0500 |
| |
| Convert to mac-address in ethernet nodes. |
| |
| commit 71748af833ca1017edf1415be376366ff2937d17 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Fri Jul 28 12:41:35 2006 -0400 |
| |
| Correct the irq value of DUART2 |
| |
| commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Fri Jul 28 12:41:41 2006 -0400 |
| |
| Change the space size of PEX IO in README |
| |
| commit 239db37c94f7a92941c4465feceb867c609241c5 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Fri Jul 28 12:41:18 2006 -0400 |
| |
| Move get_board_sys_clk to board directory |
| |
| commit 492900b985439fbce1a118afde1e35def870db03 |
| Author: John Traill <john.traill@freescale.com> |
| Date: Fri Jul 28 09:03:54 2006 +0100 |
| |
| Fix 8641HPCN pollution |
| |
| commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2 |
| Author: John Traill <john.traill@freescale.com> |
| Date: Fri Jul 28 08:16:06 2006 +0100 |
| |
| Fix 8641HPCN timebase |
| |
| commit c86360b830f1eecd7a72208575dde4f57879faea |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Fri Jul 28 00:01:34 2006 +0800 |
| |
| Fixed OF device tree of mpc86xxhpcn board. |
| |
| The changes works in with kernel irq mapping rework. |
| |
| Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| |
| commit bea3f28d285942bf3f7ab339ce85178ded544225 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Wed Jul 12 10:48:05 2006 -0400 |
| |
| Add support for reading and writing mac addresses to or from ID EEPROM. |
| |
| Added code for reading and writing Mac addresses to/from ID EEPROM(0x57). |
| With attached patch, we can use command "mac/mac read/mac save/" |
| to read and write EEPROM under u-boot prompt. |
| |
| U-boot will calculate the checksum of EEPROM while bootup, |
| if it is right, then u-boot will check whether the mac address |
| of eTSEC0/1/2/3 is availalbe (non-zero). |
| |
| If there is mac address availabe in EEPROM, u-boot will use it, |
| otherewise, u-boot will use the mac address defined in |
| MPC8641HPCN.h. This matches the requirement to set unique mac address |
| for each TSEC port. |
| |
| Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| Signed-off-by: York Sun <yorksun@freescale.com> |
| |
| commit fcb28e763415e0e4e66b0f45842d1557ae198e5e |
| Author: Jin Zhengxiong <Jason.Jin@freescale.com> |
| Date: Thu Jul 13 10:35:10 2006 -0500 |
| |
| Fixed initrd issue by define big RAM |
| |
| Signed-off-by:Jason Jin <Jason.jin@freescale.com> |
| |
| commit e6cd2a1785d74ec3d30a86f1cb360be8de478151 |
| Author: Jason Jin <Jason.jin@freescale.com> |
| Date: Fri Jul 7 10:01:45 2006 -0500 |
| |
| We made a u-boot patch to fix the hang up issue |
| when booting filesystem from ramdisk. |
| |
| Signed-off-by:Jason Jin <Jason.jin@freescale.com> |
| |
| commit 38433ccc5850ee70549af0b2bc5b920355ef5388 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:47:03 2006 -0500 |
| |
| * Switched default PCI speed for 8540 ADS back to 33MHz |
| * Added comments and a printf to warn that PCI-X won't |
| work at 33MHz |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:46:35 2006 -0500 |
| |
| * Fixed a bug where 8555 PCI code used the old variable and |
| function names |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:46:13 2006 -0500 |
| |
| * Added VIA configuration table |
| * Added support for PCI2 on CDS |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:45:41 2006 -0500 |
| |
| * Fixed PCI memory definitions |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 087454609e47295443af793a282cddcd91a5f49c |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:45:17 2006 -0500 |
| |
| * Added support for initializing second PCI bus on 85xx |
| Patch by Andy Fleming 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit b636aaeb6fd516a442fb611bbeeddf3077a687fb |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:44:49 2006 -0500 |
| |
| * Added PCI-X #defines for PCI-X initialization |
| Patch by Andy Fleming on 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 20abbc6fffa115690107cc942c7abf84bdc03a1b |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:44:23 2006 -0500 |
| |
| * Made sure the code which disables prefetch for PCI devices |
| sets the size of the prefetch region to 0 |
| Patch by Andy Fleming on 17-Mar-2006 |
| |
| Signed-off-by: Andy Fleming <afleming@freescale.com> |
| |
| commit 40d5fa35d02df22580593bf0039ab173367e8ef0 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:43:36 2006 -0500 |
| |
| * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards |
| Patch by Jon Loeliger 17-Jan-2006 |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit be7e8b0cb5a0c49dc180075b96df296a893bf146 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:43:00 2006 -0500 |
| |
| * Removed the oftree.dts for stxxtx in light of the changes |
| to the flat device tree handling code |
| Patch by Matthew McClintock 26-June-2006 |
| |
| commit 1b380ec225665e73959677f3893dc658c5925e05 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:42:24 2006 -0500 |
| |
| * Patch to modify ft_build.c to update flat device trees in place |
| Patch by Matthew McClintock 26-June-2006 |
| |
| commit 98a9c4d468a942a09ebe8979bec508017f3e4462 |
| Author: Matthew McClintock <msm@freescale.com> |
| Date: Wed Jun 28 10:41:37 2006 -0500 |
| |
| * Modify bootm command to support booting with flat device trees |
| Patch by Matthew McClintock 26-June-2006 |
| |
| commit da012ab661fd4ab169dd7b9b32201a4df62cf34a |
| Author: Jin Zhengxiong <Jason.Jin@freescale.com> |
| Date: Wed Jun 28 08:43:56 2006 -0500 |
| |
| Change Id to symbolic name for RTL8139 |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0 |
| Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> |
| Date: Tue Jun 27 18:12:10 2006 +0800 |
| |
| Fix RTL8139 in big endian |
| |
| signed-off-by: Jason Jin <Jason.Jin@freescale.com> |
| signed-off-by: Wei Zhang <wei.zhang@freescale.com> |
| |
| commit fcfb9a57947fc203b99fe81ab0578f7286261f9f |
| Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> |
| Date: Tue Jun 27 18:12:23 2006 +0800 |
| |
| Fix Tsec bug when no link |
| |
| When tftp a non-exist file from the tftp server, u-boot will check |
| the link of all eth port. The original file will return wrong link |
| state on the no link ports. |
| |
| signed-off-by: Jason Jin <Jason.Jin@freescale.com> |
| |
| commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2 |
| Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> |
| Date: Tue Jun 27 18:12:02 2006 +0800 |
| |
| Fix bug for io_bar size during pci scan |
| |
| During the pci scan process, Some devices return bar_reponse with the |
| highest bytes 0, such as the pci bridge in uli1575 return bar_response |
| with 0xffffff, So the bar_size should be manually set under 64K. |
| |
| Signed-off-by: Jason Jin <jason.jin@freescale.com> |
| |
| commit fa7db9c377bc2353a17bf1d381d65a6c418728f0 |
| Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> |
| Date: Tue Jun 27 18:11:54 2006 +0800 |
| |
| Enable PCIE1 for MPC8641HPCN board |
| |
| Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| |
| commit 99d70e3a47affb9bae041a2caece7cd516e213b3 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Mon Jun 26 11:06:00 2006 +0200 |
| |
| More code cleanup |
| |
| commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Jun 22 08:51:46 2006 -0500 |
| |
| Fix bug in 8641hpcn reset command with no args. |
| |
| Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| Acked-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc |
| Author: Zhang Wei <wei.zhang@freescale.com> |
| Date: Tue Jun 20 17:47:15 2006 +0800 |
| |
| Reworked IRQ mapping in OF-tree. |
| |
| commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Jun 15 21:33:37 2006 -0500 |
| |
| Do not enable address translation on secondary CPUs. |
| Do not set up BATs on secondary CPUs. Let Linux do the nasty. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 386eda022473394ad8f36b86f2bdc9b4cb816291 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Wed Jun 14 18:14:56 2006 +0200 |
| |
| Code cleanup |
| |
| commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70 |
| Author: Wolfgang Denk <wd@pollux.denx.de> |
| Date: Wed Jun 14 17:45:53 2006 +0200 |
| |
| Various USB related patches |
| - Add support for mpc8xx USB device. |
| - Add support for Common Device Class - Abstract Control Model USB console. |
| - Add support for flow control in USB slave devices. |
| - Add support for switching between gserial and cdc_acm using environment. |
| - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h |
| - Update usbcore slightly to ease host enumeration. |
| - Fix non-portable endian problems in usbdcore and usbdcore_ep0. |
| - Add AdderUSB_config as a defconfig to enable usage of the USB console |
| by default with the Adder87x U-Boot port. |
| Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006 |
| |
| commit 8ecc971618f56029ad99d3516f8b297a6ed58971 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jun 7 10:53:55 2006 -0500 |
| |
| Fix a get_board_sys_clk() use-before-def warning. |
| |
| Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| |
| commit d9bf4858fca5aa4d651b283270f77da72ebadfd5 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed Jun 7 10:52:49 2006 -0500 |
| |
| Allow DTC path to be passed in. |
| |
| Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| |
| commit c83ae9ea6d93abbe751bf8a3396236a084e56f87 |
| Author: Haiying Wang <haiying.wang@freescale.com> |
| Date: Tue Jun 6 16:54:29 2006 -0400 |
| |
| Modify the IRQ of DUART2 |
| |
| commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed May 31 13:55:35 2006 -0500 |
| |
| Review cleanups. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit cb5965fb95b77a49f4e6af95248e0c849f4af03e |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed May 31 12:44:44 2006 -0500 |
| |
| White space cleanup. |
| Some 80-column cleanups. |
| Convert printf() to puts() where possible. |
| Use #include "spd_sdram.h" as needed. |
| Enhanced reset command usage message a bit. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 3d5c5be547445dd3bd2eb7368d80df03ea437970 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed May 31 11:39:34 2006 -0500 |
| |
| Removed unneeded local_bus_init() from 8641HPCN board. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit 4d3d729c16c392d2982d3266b659d333c927697d |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed May 31 11:24:28 2006 -0500 |
| |
| Moved mpc8641hpcn_board_reset() out of cpu/ into board/. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit b2a941de060350ad15878d8219825f4950e9bb8e |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Wed May 31 10:07:28 2006 -0500 |
| |
| Remove dead debug code. |
| |
| Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| |
| commit 126aa70f10ba3d20e0a6f4d32328250513b77770 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue May 30 17:47:00 2006 -0500 |
| |
| Move mpc86xx PIXIS code to board directory |
| |
| First cut at moving the PIXIS platform code out of |
| the 86xx cpu directory and into board/mpc8641hpcn |
| where it belongs. |
| |
| Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| |
| commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue May 30 16:56:14 2006 +0200 |
| |
| Support generic OHCI support for the s3c24x0 cpu. |
| |
| commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Tue May 30 09:10:32 2006 -0500 |
| |
| Improve "reset" command's interaction with watchdog. |
| |
| "reset altbank" will reset another bank WITHOUT watch dog timer enabled |
| "reset altbank wd" will reset another bank WITH watch dog enabled |
| "diswd" will disable watch dog after u-boot boots up successfully |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Tue May 30 08:51:19 2006 -0500 |
| |
| Fix two SDRAM setup bugs. |
| |
| Fix ECC setup bug. |
| Enable 1T/2T based on number of DIMMs present. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit d11fec5015334deb2010e36ce00bb118cc5429a5 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Fri May 26 10:24:48 2006 -0500 |
| |
| Add first draft of the MPC8641HPCN doc/README. |
| |
| Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| |
| commit ed45d6c930b5939718a87ee12e25cf9a05978d4a |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Fri May 26 10:13:04 2006 -0500 |
| |
| Added pci@8000 block. |
| Updated ethernet interrupt mappings (moved up 48). |
| Cleaned up a few comments. |
| |
| Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| |
| commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7 |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Fri May 26 10:01:16 2006 -0500 |
| |
| Allow args on reset command. |
| |
| Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| |
| commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue May 23 13:38:35 2006 +0200 |
| |
| Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some |
| fixes to the latter. |
| |
| commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Tue May 23 10:33:11 2006 +0200 |
| |
| More cleanup for the delta board and the generic usb_ohci driver. Added |
| CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific |
| initialization and cleanup hooks respectively. |
| |
| commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10 |
| Author: Markus Klotzbuecher <mk@denx.de> |
| Date: Mon May 22 16:33:54 2006 +0200 |
| |
| This patch adds USB storage support for the delta board. This is the first |
| board to make use of a generic OHCI driver, that calls hooks for board |
| dependant initialization. |
| |
| commit 14e37081ff3cac7ebe6e93836523429853b6b292 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Fri May 19 13:28:39 2006 -0500 |
| |
| Change arbitration to round-robin for SMP linux. |
| |
| commit 9a655876e5995be80f49054e2509500e871e4d3a |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Fri May 19 13:26:34 2006 -0500 |
| |
| Enable dual DDR controllers and interleaving. |
| |
| commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Fri May 19 13:22:44 2006 -0500 |
| |
| Update 86xx address map and LAWBARs. |
| |
| commit cccce5d0581bb0ba4602799a4b5112e58d1579cb |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Fri May 19 13:14:15 2006 -0500 |
| |
| Remove L2 Cache invalidate polling. |
| |
| commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8 |
| Author: Jon Loeliger <jdl@jdl.com> |
| Date: Fri May 19 12:33:09 2006 -0500 |
| |
| Enable 2nd CPU and I2C. |
| |
| commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Mon May 15 07:26:56 2006 -0500 |
| |
| Update interrupt mapping. |
| |
| commit 6cfea33477b04b63ed47386ed1629529484c33ba |
| Author: Haiying Wang <Haiying.Wang@freescale.com> |
| Date: Wed May 10 09:38:06 2006 -0500 |
| |
| Remove unneeded INIT_RAM_LOCK cache twiddling. |
| Correctly tracks r29 as global data pointer now. |
| |
| Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| |
| commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed May 10 09:33:07 2006 -0500 |
| |
| Remove unnecessary flash.c file. |
| |
| commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Tue May 9 08:23:49 2006 -0500 |
| |
| Get MPC8641HPCN flash images working. |
| |
| Enable the CFI driver. |
| Remove bogus LAWBAR7 cruft. |
| Use correct TEXT_BASE, Fixup load script. |
| Enable SPD EEPROM during DDR setup. |
| Use generic RFC 1918 IP addresses by default. |
| |
| commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Apr 27 10:15:16 2006 -0500 |
| |
| Cleanup whitespaces and style issues. |
| Removed //-style comments. |
| Use 80-column lines. |
| Remove trailing whitespace. |
| Remove dead code and debug cruft. |
| |
| commit a2320a6bf8113a09544c42d160d10ac69d049a03 |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Thu Apr 27 08:22:39 2006 -0500 |
| |
| Revert bad PCI prefetch limit change. |
| |
| commit debb7354d1ea4f694154818df5e5b523f5c1cc1d |
| Author: Jon Loeliger <jdl@freescale.com> |
| Date: Wed Apr 26 17:58:56 2006 -0500 |
| |
| Initial support for MPC8641 HPCN board. |