| /* |
| * Copyright 2007, 2010-2011 Freescale Semiconductor, Inc. |
| * Authors: York Sun <yorksun@freescale.com> |
| * Timur Tabi <timur@freescale.com> |
| * |
| * FSL DIU Framebuffer driver |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <malloc.h> |
| #include <asm/io.h> |
| |
| #include "videomodes.h" |
| #include <video_fb.h> |
| #include <fsl_diu_fb.h> |
| #include <linux/list.h> |
| #include <linux/fb.h> |
| |
| /* This setting is used for the ifm pdm360ng with PRIMEVIEW PM070WL3 */ |
| static struct fb_videomode fsl_diu_mode_800_480 = { |
| .name = "800x480-60", |
| .refresh = 60, |
| .xres = 800, |
| .yres = 480, |
| .pixclock = 31250, |
| .left_margin = 86, |
| .right_margin = 42, |
| .upper_margin = 33, |
| .lower_margin = 10, |
| .hsync_len = 128, |
| .vsync_len = 2, |
| .sync = 0, |
| .vmode = FB_VMODE_NONINTERLACED |
| }; |
| |
| /* For the SHARP LQ084S3LG01, used on the P1022DS board */ |
| static struct fb_videomode fsl_diu_mode_800_600 = { |
| .name = "800x600-60", |
| .refresh = 60, |
| .xres = 800, |
| .yres = 600, |
| .pixclock = 25000, |
| .left_margin = 88, |
| .right_margin = 40, |
| .upper_margin = 23, |
| .lower_margin = 1, |
| .hsync_len = 128, |
| .vsync_len = 4, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }; |
| |
| /* |
| * These parameters give default parameters |
| * for video output 1024x768, |
| * FIXME - change timing to proper amounts |
| * hsync 31.5kHz, vsync 60Hz |
| */ |
| static struct fb_videomode fsl_diu_mode_1024_768 = { |
| .name = "1024x768-60", |
| .refresh = 60, |
| .xres = 1024, |
| .yres = 768, |
| .pixclock = 15385, |
| .left_margin = 160, |
| .right_margin = 24, |
| .upper_margin = 29, |
| .lower_margin = 3, |
| .hsync_len = 136, |
| .vsync_len = 6, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }; |
| |
| static struct fb_videomode fsl_diu_mode_1280_1024 = { |
| .name = "1280x1024-60", |
| .refresh = 60, |
| .xres = 1280, |
| .yres = 1024, |
| .pixclock = 9375, |
| .left_margin = 38, |
| .right_margin = 128, |
| .upper_margin = 2, |
| .lower_margin = 7, |
| .hsync_len = 216, |
| .vsync_len = 37, |
| .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| .vmode = FB_VMODE_NONINTERLACED |
| }; |
| |
| /* |
| * These are the fields of area descriptor(in DDR memory) for every plane |
| */ |
| struct diu_ad { |
| /* Word 0(32-bit) in DDR memory */ |
| __le32 pix_fmt; /* hard coding pixel format */ |
| /* Word 1(32-bit) in DDR memory */ |
| __le32 addr; |
| /* Word 2(32-bit) in DDR memory */ |
| __le32 src_size_g_alpha; |
| /* Word 3(32-bit) in DDR memory */ |
| __le32 aoi_size; |
| /* Word 4(32-bit) in DDR memory */ |
| __le32 offset_xyi; |
| /* Word 5(32-bit) in DDR memory */ |
| __le32 offset_xyd; |
| /* Word 6(32-bit) in DDR memory */ |
| __le32 ckmax_r:8; |
| __le32 ckmax_g:8; |
| __le32 ckmax_b:8; |
| __le32 res9:8; |
| /* Word 7(32-bit) in DDR memory */ |
| __le32 ckmin_r:8; |
| __le32 ckmin_g:8; |
| __le32 ckmin_b:8; |
| __le32 res10:8; |
| /* Word 8(32-bit) in DDR memory */ |
| __le32 next_ad; |
| /* Word 9(32-bit) in DDR memory, just for 64-bit aligned */ |
| __le32 res[3]; |
| } __attribute__ ((packed)); |
| |
| /* |
| * DIU register map |
| */ |
| struct diu { |
| __be32 desc[3]; |
| __be32 gamma; |
| __be32 pallete; |
| __be32 cursor; |
| __be32 curs_pos; |
| __be32 diu_mode; |
| __be32 bgnd; |
| __be32 bgnd_wb; |
| __be32 disp_size; |
| __be32 wb_size; |
| __be32 wb_mem_addr; |
| __be32 hsyn_para; |
| __be32 vsyn_para; |
| __be32 syn_pol; |
| __be32 thresholds; |
| __be32 int_status; |
| __be32 int_mask; |
| __be32 colorbar[8]; |
| __be32 filling; |
| __be32 plut; |
| } __attribute__ ((packed)); |
| |
| struct diu_addr { |
| void *vaddr; /* Virtual address */ |
| u32 paddr; /* 32-bit physical address */ |
| unsigned int offset; /* Alignment offset */ |
| }; |
| |
| static struct fb_info info; |
| |
| /* |
| * Align to 64-bit(8-byte), 32-byte, etc. |
| */ |
| static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align) |
| { |
| u32 offset, ssize; |
| u32 mask; |
| |
| ssize = size + bytes_align; |
| buf->vaddr = malloc(ssize); |
| if (!buf->vaddr) |
| return -1; |
| |
| memset(buf->vaddr, 0, ssize); |
| mask = bytes_align - 1; |
| offset = (u32)buf->vaddr & mask; |
| if (offset) { |
| buf->offset = bytes_align - offset; |
| buf->vaddr += offset; |
| } else |
| buf->offset = 0; |
| |
| buf->paddr = virt_to_phys(buf->vaddr); |
| return 0; |
| } |
| |
| /* |
| * Allocate a framebuffer and an Area Descriptor that points to it. Both |
| * are created in the same memory block. The Area Descriptor is updated to |
| * point to the framebuffer memory. Memory is aligned as needed. |
| */ |
| static struct diu_ad *allocate_fb(unsigned int xres, unsigned int yres, |
| unsigned int depth, char **fb) |
| { |
| unsigned long size = xres * yres * depth; |
| struct diu_addr addr; |
| struct diu_ad *ad; |
| size_t ad_size = roundup(sizeof(struct diu_ad), 32); |
| |
| /* |
| * Allocate a memory block that holds the Area Descriptor and the |
| * frame buffer right behind it. To keep the code simple, everything |
| * is aligned on a 32-byte address. |
| */ |
| if (allocate_buf(&addr, ad_size + size, 32) < 0) |
| return NULL; |
| |
| ad = addr.vaddr; |
| ad->addr = cpu_to_le32(addr.paddr + ad_size); |
| ad->aoi_size = cpu_to_le32((yres << 16) | xres); |
| ad->src_size_g_alpha = cpu_to_le32((yres << 12) | xres); |
| ad->offset_xyi = 0; |
| ad->offset_xyd = 0; |
| |
| if (fb) |
| *fb = addr.vaddr + ad_size; |
| |
| return ad; |
| } |
| |
| int fsl_diu_init(u16 xres, u16 yres, u32 pixel_format, int gamma_fix) |
| { |
| struct fb_videomode *fsl_diu_mode_db; |
| struct diu_ad *ad; |
| struct diu *hw = (struct diu *)CONFIG_SYS_DIU_ADDR; |
| u8 *gamma_table_base; |
| unsigned int i, j; |
| struct diu_ad *dummy_ad; |
| struct diu_addr gamma; |
| struct diu_addr cursor; |
| |
| /* Convert the X,Y resolution pair into a single number */ |
| #define RESOLUTION(x, y) (((u32)(x) << 16) | (y)) |
| |
| switch (RESOLUTION(xres, yres)) { |
| case RESOLUTION(800, 480): |
| fsl_diu_mode_db = &fsl_diu_mode_800_480; |
| break; |
| case RESOLUTION(800, 600): |
| fsl_diu_mode_db = &fsl_diu_mode_800_600; |
| break; |
| case RESOLUTION(1024, 768): |
| fsl_diu_mode_db = &fsl_diu_mode_1024_768; |
| break; |
| case RESOLUTION(1280, 1024): |
| fsl_diu_mode_db = &fsl_diu_mode_1280_1024; |
| break; |
| default: |
| printf("DIU: Unsupported resolution %ux%u\n", xres, yres); |
| return -1; |
| } |
| |
| /* The AD struct for the dummy framebuffer and the FB itself */ |
| dummy_ad = allocate_fb(2, 4, 4, NULL); |
| if (!dummy_ad) { |
| printf("DIU: Out of memory\n"); |
| return -1; |
| } |
| dummy_ad->pix_fmt = 0x88883316; |
| |
| /* read mode info */ |
| info.var.xres = fsl_diu_mode_db->xres; |
| info.var.yres = fsl_diu_mode_db->yres; |
| info.var.bits_per_pixel = 32; |
| info.var.pixclock = fsl_diu_mode_db->pixclock; |
| info.var.left_margin = fsl_diu_mode_db->left_margin; |
| info.var.right_margin = fsl_diu_mode_db->right_margin; |
| info.var.upper_margin = fsl_diu_mode_db->upper_margin; |
| info.var.lower_margin = fsl_diu_mode_db->lower_margin; |
| info.var.hsync_len = fsl_diu_mode_db->hsync_len; |
| info.var.vsync_len = fsl_diu_mode_db->vsync_len; |
| info.var.sync = fsl_diu_mode_db->sync; |
| info.var.vmode = fsl_diu_mode_db->vmode; |
| info.fix.line_length = info.var.xres * info.var.bits_per_pixel / 8; |
| |
| /* Memory allocation for framebuffer */ |
| info.screen_size = |
| info.var.xres * info.var.yres * (info.var.bits_per_pixel / 8); |
| ad = allocate_fb(info.var.xres, info.var.yres, |
| info.var.bits_per_pixel / 8, &info.screen_base); |
| if (!ad) { |
| printf("DIU: Out of memory\n"); |
| return -1; |
| } |
| |
| ad->pix_fmt = pixel_format; |
| |
| /* Disable chroma keying function */ |
| ad->ckmax_r = 0; |
| ad->ckmax_g = 0; |
| ad->ckmax_b = 0; |
| |
| ad->ckmin_r = 255; |
| ad->ckmin_g = 255; |
| ad->ckmin_b = 255; |
| |
| /* Initialize the gamma table */ |
| if (allocate_buf(&gamma, 256 * 3, 32) < 0) { |
| printf("DIU: Out of memory\n"); |
| return -1; |
| } |
| gamma_table_base = gamma.vaddr; |
| for (i = 0; i <= 2; i++) |
| for (j = 0; j < 256; j++) |
| *gamma_table_base++ = j; |
| |
| if (gamma_fix == 1) { /* fix the gamma */ |
| gamma_table_base = gamma.vaddr; |
| for (i = 0; i < 256 * 3; i++) { |
| gamma_table_base[i] = (gamma_table_base[i] << 2) |
| | ((gamma_table_base[i] >> 6) & 0x03); |
| } |
| } |
| |
| /* Initialize the cursor */ |
| if (allocate_buf(&cursor, 32 * 32 * 2, 32) < 0) { |
| printf("DIU: Can't alloc cursor data\n"); |
| return -1; |
| } |
| |
| /* Program DIU registers */ |
| out_be32(&hw->diu_mode, 0); /* Temporarily disable the DIU */ |
| |
| out_be32(&hw->gamma, gamma.paddr); |
| out_be32(&hw->cursor, cursor.paddr); |
| out_be32(&hw->bgnd, 0x007F7F7F); |
| out_be32(&hw->bgnd_wb, 0); |
| out_be32(&hw->disp_size, info.var.yres << 16 | info.var.xres); |
| out_be32(&hw->wb_size, 0); |
| out_be32(&hw->wb_mem_addr, 0); |
| out_be32(&hw->hsyn_para, info.var.left_margin << 22 | |
| info.var.hsync_len << 11 | |
| info.var.right_margin); |
| |
| out_be32(&hw->vsyn_para, info.var.upper_margin << 22 | |
| info.var.vsync_len << 11 | |
| info.var.lower_margin); |
| |
| out_be32(&hw->syn_pol, 0); |
| out_be32(&hw->thresholds, 0x00037800); |
| out_be32(&hw->int_status, 0); |
| out_be32(&hw->int_mask, 0); |
| out_be32(&hw->plut, 0x01F5F666); |
| /* Pixel Clock configuration */ |
| diu_set_pixel_clock(info.var.pixclock); |
| |
| /* Set the frame buffers */ |
| out_be32(&hw->desc[0], virt_to_phys(ad)); |
| out_be32(&hw->desc[1], virt_to_phys(dummy_ad)); |
| out_be32(&hw->desc[2], virt_to_phys(dummy_ad)); |
| |
| /* Enable the DIU, set display to all three planes */ |
| out_be32(&hw->diu_mode, 1); |
| |
| return 0; |
| } |
| |
| void *video_hw_init(void) |
| { |
| static GraphicDevice ctfb; |
| const char *options; |
| unsigned int depth = 0, freq = 0; |
| |
| if (!video_get_video_mode(&ctfb.winSizeX, &ctfb.winSizeY, &depth, &freq, |
| &options)) |
| return NULL; |
| |
| /* Find the monitor port, which is a required option */ |
| if (!options) |
| return NULL; |
| if (strncmp(options, "monitor=", 8) != 0) |
| return NULL; |
| |
| if (platform_diu_init(ctfb.winSizeX, ctfb.winSizeY, options + 8) < 0) |
| return NULL; |
| |
| /* fill in Graphic device struct */ |
| sprintf(ctfb.modeIdent, "%ix%ix%i %ikHz %iHz", |
| ctfb.winSizeX, ctfb.winSizeY, depth, 64, freq); |
| |
| ctfb.frameAdrs = (unsigned int)info.screen_base; |
| ctfb.plnSizeX = ctfb.winSizeX; |
| ctfb.plnSizeY = ctfb.winSizeY; |
| |
| ctfb.gdfBytesPP = 4; |
| ctfb.gdfIndex = GDF_32BIT_X888RGB; |
| |
| ctfb.isaBase = 0; |
| ctfb.pciBase = 0; |
| ctfb.memSize = info.screen_size; |
| |
| /* Cursor Start Address */ |
| ctfb.dprBase = 0; |
| ctfb.vprBase = 0; |
| ctfb.cprBase = 0; |
| |
| return &ctfb; |
| } |