| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * SAM9X60's PLL clock support. |
| * |
| * Copyright (C) 2020 Microchip Technology Inc. and its subsidiaries |
| * |
| * Author: Claudiu Beznea <claudiu.beznea@microchip.com> |
| * |
| * Based on drivers/clk/at91/clk-sam9x60-pll.c from Linux. |
| * |
| */ |
| |
| #include <asm/processor.h> |
| #include <common.h> |
| #include <clk-uclass.h> |
| #include <div64.h> |
| #include <dm.h> |
| #include <linux/clk-provider.h> |
| #include <linux/clk/at91_pmc.h> |
| #include <linux/delay.h> |
| |
| #include "pmc.h" |
| |
| #define UBOOT_DM_CLK_AT91_SAM9X60_DIV_PLL "at91-sam9x60-div-pll-clk" |
| #define UBOOT_DM_CLK_AT91_SAM9X60_FRAC_PLL "at91-sam9x60-frac-pll-clk" |
| |
| #define PMC_PLL_CTRL0_DIV_MSK GENMASK(7, 0) |
| #define PMC_PLL_CTRL1_MUL_MSK GENMASK(31, 24) |
| #define PMC_PLL_CTRL1_FRACR_MSK GENMASK(21, 0) |
| |
| #define PLL_DIV_MAX (FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, UINT_MAX) + 1) |
| #define UPLL_DIV 2 |
| #define PLL_MUL_MAX (FIELD_GET(PMC_PLL_CTRL1_MUL_MSK, UINT_MAX) + 1) |
| |
| #define FCORE_MIN (600000000) |
| #define FCORE_MAX (1200000000) |
| |
| #define PLL_MAX_ID 7 |
| |
| struct sam9x60_pll { |
| void __iomem *base; |
| const struct clk_pll_characteristics *characteristics; |
| const struct clk_pll_layout *layout; |
| struct clk clk; |
| u8 id; |
| }; |
| |
| #define to_sam9x60_pll(_clk) container_of(_clk, struct sam9x60_pll, clk) |
| |
| static inline bool sam9x60_pll_ready(void __iomem *base, int id) |
| { |
| unsigned int status; |
| |
| pmc_read(base, AT91_PMC_PLL_ISR0, &status); |
| |
| return !!(status & BIT(id)); |
| } |
| |
| static long sam9x60_frac_pll_compute_mul_frac(u32 *mul, u32 *frac, ulong rate, |
| ulong parent_rate) |
| { |
| unsigned long tmprate, remainder; |
| unsigned long nmul = 0; |
| unsigned long nfrac = 0; |
| |
| if (rate < FCORE_MIN || rate > FCORE_MAX) |
| return -ERANGE; |
| |
| /* |
| * Calculate the multiplier associated with the current |
| * divider that provide the closest rate to the requested one. |
| */ |
| nmul = mult_frac(rate, 1, parent_rate); |
| tmprate = mult_frac(parent_rate, nmul, 1); |
| remainder = rate - tmprate; |
| |
| if (remainder) { |
| nfrac = DIV_ROUND_CLOSEST_ULL((u64)remainder * (1 << 22), |
| parent_rate); |
| |
| tmprate += DIV_ROUND_CLOSEST_ULL((u64)nfrac * parent_rate, |
| (1 << 22)); |
| } |
| |
| /* Check if resulted rate is valid. */ |
| if (tmprate < FCORE_MIN || tmprate > FCORE_MAX) |
| return -ERANGE; |
| |
| *mul = nmul - 1; |
| *frac = nfrac; |
| |
| return tmprate; |
| } |
| |
| static ulong sam9x60_frac_pll_set_rate(struct clk *clk, ulong rate) |
| { |
| struct sam9x60_pll *pll = to_sam9x60_pll(clk); |
| void __iomem *base = pll->base; |
| ulong parent_rate = clk_get_parent_rate(clk); |
| u32 nmul, cmul, nfrac, cfrac, val; |
| bool ready = sam9x60_pll_ready(base, pll->id); |
| long ret; |
| |
| if (!parent_rate) |
| return 0; |
| |
| ret = sam9x60_frac_pll_compute_mul_frac(&nmul, &nfrac, rate, |
| parent_rate); |
| if (ret < 0) |
| return 0; |
| |
| pmc_update_bits(base, AT91_PMC_PLL_UPDT, AT91_PMC_PLL_UPDT_ID_MSK, |
| pll->id); |
| pmc_read(base, AT91_PMC_PLL_CTRL1, &val); |
| cmul = (val & pll->layout->mul_mask) >> pll->layout->mul_shift; |
| cfrac = (val & pll->layout->frac_mask) >> pll->layout->frac_shift; |
| |
| /* Check against current values. */ |
| if (sam9x60_pll_ready(base, pll->id) && |
| nmul == cmul && nfrac == cfrac) |
| return 0; |
| |
| /* Update it to hardware. */ |
| pmc_write(base, AT91_PMC_PLL_CTRL1, |
| (nmul << pll->layout->mul_shift) | |
| (nfrac << pll->layout->frac_shift)); |
| |
| pmc_update_bits(base, AT91_PMC_PLL_UPDT, |
| AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK, |
| AT91_PMC_PLL_UPDT_UPDATE | pll->id); |
| |
| while (ready && !sam9x60_pll_ready(base, pll->id)) { |
| debug("waiting for pll %u...\n", pll->id); |
| cpu_relax(); |
| } |
| |
| return parent_rate * (nmul + 1) + ((u64)parent_rate * nfrac >> 22); |
| } |
| |
| static ulong sam9x60_frac_pll_get_rate(struct clk *clk) |
| { |
| struct sam9x60_pll *pll = to_sam9x60_pll(clk); |
| void __iomem *base = pll->base; |
| ulong parent_rate = clk_get_parent_rate(clk); |
| u32 mul, frac, val; |
| |
| if (!parent_rate) |
| return 0; |
| |
| pmc_update_bits(base, AT91_PMC_PLL_UPDT, AT91_PMC_PLL_UPDT_ID_MSK, |
| pll->id); |
| pmc_read(base, AT91_PMC_PLL_CTRL1, &val); |
| mul = (val & pll->layout->mul_mask) >> pll->layout->mul_shift; |
| frac = (val & pll->layout->frac_mask) >> pll->layout->frac_shift; |
| |
| return (parent_rate * (mul + 1) + ((u64)parent_rate * frac >> 22)); |
| } |
| |
| static int sam9x60_frac_pll_enable(struct clk *clk) |
| { |
| struct sam9x60_pll *pll = to_sam9x60_pll(clk); |
| void __iomem *base = pll->base; |
| unsigned int val; |
| ulong crate; |
| |
| crate = sam9x60_frac_pll_get_rate(clk); |
| if (crate < FCORE_MIN || crate > FCORE_MAX) |
| return -ERANGE; |
| |
| pmc_update_bits(base, AT91_PMC_PLL_UPDT, AT91_PMC_PLL_UPDT_ID_MSK, |
| pll->id); |
| pmc_read(base, AT91_PMC_PLL_CTRL1, &val); |
| |
| if (sam9x60_pll_ready(base, pll->id)) |
| return 0; |
| |
| pmc_update_bits(base, AT91_PMC_PLL_UPDT, |
| AT91_PMC_PMM_UPDT_STUPTIM_MSK | |
| AT91_PMC_PLL_UPDT_ID_MSK, |
| AT91_PMC_PLL_UPDT_STUPTIM(0x3f) | pll->id); |
| |
| /* Recommended value for AT91_PMC_PLL_ACR */ |
| if (pll->characteristics->upll) |
| val = AT91_PMC_PLL_ACR_DEFAULT_UPLL; |
| else |
| val = AT91_PMC_PLL_ACR_DEFAULT_PLLA; |
| pmc_write(base, AT91_PMC_PLL_ACR, val); |
| |
| if (pll->characteristics->upll) { |
| /* Enable the UTMI internal bandgap */ |
| val |= AT91_PMC_PLL_ACR_UTMIBG; |
| pmc_write(base, AT91_PMC_PLL_ACR, val); |
| |
| udelay(10); |
| |
| /* Enable the UTMI internal regulator */ |
| val |= AT91_PMC_PLL_ACR_UTMIVR; |
| pmc_write(base, AT91_PMC_PLL_ACR, val); |
| |
| udelay(10); |
| |
| pmc_update_bits(base, AT91_PMC_PLL_UPDT, |
| AT91_PMC_PLL_UPDT_UPDATE | |
| AT91_PMC_PLL_UPDT_ID_MSK, |
| AT91_PMC_PLL_UPDT_UPDATE | pll->id); |
| } |
| |
| pmc_update_bits(base, AT91_PMC_PLL_CTRL0, |
| AT91_PMC_PLL_CTRL0_ENLOCK | AT91_PMC_PLL_CTRL0_ENPLL, |
| AT91_PMC_PLL_CTRL0_ENLOCK | AT91_PMC_PLL_CTRL0_ENPLL); |
| |
| pmc_update_bits(base, AT91_PMC_PLL_UPDT, |
| AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK, |
| AT91_PMC_PLL_UPDT_UPDATE | pll->id); |
| |
| while (!sam9x60_pll_ready(base, pll->id)) { |
| debug("waiting for pll %u...\n", pll->id); |
| cpu_relax(); |
| } |
| |
| return 0; |
| } |
| |
| static int sam9x60_frac_pll_disable(struct clk *clk) |
| { |
| struct sam9x60_pll *pll = to_sam9x60_pll(clk); |
| void __iomem *base = pll->base; |
| |
| pmc_update_bits(base, AT91_PMC_PLL_UPDT, AT91_PMC_PLL_UPDT_ID_MSK, |
| pll->id); |
| |
| pmc_update_bits(base, AT91_PMC_PLL_CTRL0, |
| AT91_PMC_PLL_CTRL0_ENPLL, 0); |
| |
| if (pll->characteristics->upll) |
| pmc_update_bits(base, AT91_PMC_PLL_ACR, |
| AT91_PMC_PLL_ACR_UTMIBG | |
| AT91_PMC_PLL_ACR_UTMIVR, 0); |
| |
| pmc_update_bits(base, AT91_PMC_PLL_UPDT, |
| AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK, |
| AT91_PMC_PLL_UPDT_UPDATE | pll->id); |
| |
| return 0; |
| } |
| |
| static const struct clk_ops sam9x60_frac_pll_ops = { |
| .enable = sam9x60_frac_pll_enable, |
| .disable = sam9x60_frac_pll_disable, |
| .set_rate = sam9x60_frac_pll_set_rate, |
| .get_rate = sam9x60_frac_pll_get_rate, |
| }; |
| |
| static int sam9x60_div_pll_enable(struct clk *clk) |
| { |
| struct sam9x60_pll *pll = to_sam9x60_pll(clk); |
| void __iomem *base = pll->base; |
| unsigned int val; |
| |
| pmc_update_bits(base, AT91_PMC_PLL_UPDT, AT91_PMC_PLL_UPDT_ID_MSK, |
| pll->id); |
| pmc_read(base, AT91_PMC_PLL_CTRL0, &val); |
| |
| /* Stop if enabled. */ |
| if (val & pll->layout->endiv_mask) |
| return 0; |
| |
| pmc_update_bits(base, AT91_PMC_PLL_CTRL0, |
| pll->layout->endiv_mask, |
| (1 << pll->layout->endiv_shift)); |
| |
| pmc_update_bits(base, AT91_PMC_PLL_UPDT, |
| AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK, |
| AT91_PMC_PLL_UPDT_UPDATE | pll->id); |
| |
| while (!sam9x60_pll_ready(base, pll->id)) { |
| debug("waiting for pll %u...\n", pll->id); |
| cpu_relax(); |
| } |
| |
| return 0; |
| } |
| |
| static int sam9x60_div_pll_disable(struct clk *clk) |
| { |
| struct sam9x60_pll *pll = to_sam9x60_pll(clk); |
| void __iomem *base = pll->base; |
| |
| pmc_update_bits(base, AT91_PMC_PLL_UPDT, AT91_PMC_PLL_UPDT_ID_MSK, |
| pll->id); |
| |
| pmc_update_bits(base, AT91_PMC_PLL_CTRL0, |
| pll->layout->endiv_mask, 0); |
| |
| pmc_update_bits(base, AT91_PMC_PLL_UPDT, |
| AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK, |
| AT91_PMC_PLL_UPDT_UPDATE | pll->id); |
| |
| return 0; |
| } |
| |
| static ulong sam9x60_div_pll_set_rate(struct clk *clk, ulong rate) |
| { |
| struct sam9x60_pll *pll = to_sam9x60_pll(clk); |
| void __iomem *base = pll->base; |
| const struct clk_pll_characteristics *characteristics = |
| pll->characteristics; |
| ulong parent_rate = clk_get_parent_rate(clk); |
| u8 div = DIV_ROUND_CLOSEST_ULL(parent_rate, rate) - 1; |
| ulong req_rate = parent_rate / (div + 1); |
| bool ready = sam9x60_pll_ready(base, pll->id); |
| u32 val; |
| |
| if (!parent_rate || div > pll->layout->div_mask || |
| req_rate < characteristics->output[0].min || |
| req_rate > characteristics->output[0].max) |
| return 0; |
| |
| pmc_update_bits(base, AT91_PMC_PLL_UPDT, AT91_PMC_PLL_UPDT_ID_MSK, |
| pll->id); |
| pmc_read(base, AT91_PMC_PLL_CTRL0, &val); |
| /* Compare against current value. */ |
| if (div == ((val & pll->layout->div_mask) >> pll->layout->div_shift)) |
| return 0; |
| |
| /* Update it to hardware. */ |
| pmc_update_bits(base, AT91_PMC_PLL_CTRL0, |
| pll->layout->div_mask, |
| div << pll->layout->div_shift); |
| |
| pmc_update_bits(base, AT91_PMC_PLL_UPDT, |
| AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK, |
| AT91_PMC_PLL_UPDT_UPDATE | pll->id); |
| |
| while (ready && !sam9x60_pll_ready(base, pll->id)) { |
| debug("waiting for pll %u...\n", pll->id); |
| cpu_relax(); |
| } |
| |
| return req_rate; |
| } |
| |
| static ulong sam9x60_div_pll_get_rate(struct clk *clk) |
| { |
| struct sam9x60_pll *pll = to_sam9x60_pll(clk); |
| void __iomem *base = pll->base; |
| ulong parent_rate = clk_get_parent_rate(clk); |
| u32 val; |
| u8 div; |
| |
| if (!parent_rate) |
| return 0; |
| |
| pmc_update_bits(base, AT91_PMC_PLL_UPDT, AT91_PMC_PLL_UPDT_ID_MSK, |
| pll->id); |
| |
| pmc_read(base, AT91_PMC_PLL_CTRL0, &val); |
| |
| div = (val & pll->layout->div_mask) >> pll->layout->div_shift; |
| |
| return parent_rate / (div + 1); |
| } |
| |
| static const struct clk_ops sam9x60_div_pll_ops = { |
| .enable = sam9x60_div_pll_enable, |
| .disable = sam9x60_div_pll_disable, |
| .set_rate = sam9x60_div_pll_set_rate, |
| .get_rate = sam9x60_div_pll_get_rate, |
| }; |
| |
| static struct clk * |
| sam9x60_clk_register_pll(void __iomem *base, const char *type, |
| const char *name, const char *parent_name, u8 id, |
| const struct clk_pll_characteristics *characteristics, |
| const struct clk_pll_layout *layout, u32 flags) |
| { |
| struct sam9x60_pll *pll; |
| struct clk *clk; |
| int ret; |
| |
| if (!base || !type || !name || !parent_name || !characteristics || |
| !layout || id > PLL_MAX_ID) |
| return ERR_PTR(-EINVAL); |
| |
| pll = kzalloc(sizeof(*pll), GFP_KERNEL); |
| if (!pll) |
| return ERR_PTR(-ENOMEM); |
| |
| pll->id = id; |
| pll->characteristics = characteristics; |
| pll->layout = layout; |
| pll->base = base; |
| clk = &pll->clk; |
| clk->flags = flags; |
| |
| ret = clk_register(clk, type, name, parent_name); |
| if (ret) { |
| kfree(pll); |
| clk = ERR_PTR(ret); |
| } |
| |
| return clk; |
| } |
| |
| struct clk * |
| sam9x60_clk_register_div_pll(void __iomem *base, const char *name, |
| const char *parent_name, u8 id, |
| const struct clk_pll_characteristics *characteristics, |
| const struct clk_pll_layout *layout, bool critical) |
| { |
| return sam9x60_clk_register_pll(base, |
| UBOOT_DM_CLK_AT91_SAM9X60_DIV_PLL, name, parent_name, id, |
| characteristics, layout, |
| CLK_GET_RATE_NOCACHE | (critical ? CLK_IS_CRITICAL : 0)); |
| } |
| |
| struct clk * |
| sam9x60_clk_register_frac_pll(void __iomem *base, const char *name, |
| const char *parent_name, u8 id, |
| const struct clk_pll_characteristics *characteristics, |
| const struct clk_pll_layout *layout, bool critical) |
| { |
| return sam9x60_clk_register_pll(base, |
| UBOOT_DM_CLK_AT91_SAM9X60_FRAC_PLL, name, parent_name, id, |
| characteristics, layout, |
| CLK_GET_RATE_NOCACHE | (critical ? CLK_IS_CRITICAL : 0)); |
| } |
| |
| U_BOOT_DRIVER(at91_sam9x60_div_pll_clk) = { |
| .name = UBOOT_DM_CLK_AT91_SAM9X60_DIV_PLL, |
| .id = UCLASS_CLK, |
| .ops = &sam9x60_div_pll_ops, |
| .flags = DM_FLAG_PRE_RELOC, |
| }; |
| |
| U_BOOT_DRIVER(at91_sam9x60_frac_pll_clk) = { |
| .name = UBOOT_DM_CLK_AT91_SAM9X60_FRAC_PLL, |
| .id = UCLASS_CLK, |
| .ops = &sam9x60_frac_pll_ops, |
| .flags = DM_FLAG_PRE_RELOC, |
| }; |