| /* |
| * (C) Copyright 2007-2011 |
| * Heiko Schocher, DENX Software Engineering, hs@denx.de. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* |
| * High Level Configuration Options |
| * (easy to change) |
| */ |
| |
| #define CONFIG_MPC8247 |
| /* MGCOGE */ |
| #if defined(CONFIG_MGCOGE) |
| #define CONFIG_HOSTNAME mgcoge |
| #define CONFIG_KM_BOARD_EXTRA_ENV "" |
| |
| /* MGCOGE3NE */ |
| #elif defined(CONFIG_MGCOGE3NE) |
| #define CONFIG_HOSTNAME mgcoge3ne |
| #define CONFIG_KM_82XX |
| #define CONFIG_KM_BOARD_EXTRA_ENV "bobcatreset=true\0" |
| |
| #else |
| #error ("Board unsupported") |
| #endif |
| |
| #define CONFIG_SYS_TEXT_BASE 0xFE000000 |
| |
| #define CONFIG_MISC_INIT_R |
| |
| /* include common defines/options for all Keymile boards */ |
| #include "km/keymile-common.h" |
| #include "km/km-powerpc.h" |
| |
| #define CONFIG_SYS_SDRAM_BASE 0x00000000 |
| #define CONFIG_SYS_FLASH_BASE 0xFE000000 |
| #define CONFIG_SYS_FLASH_SIZE 32 |
| #define CONFIG_SYS_FLASH_CFI |
| #define CONFIG_FLASH_CFI_DRIVER |
| |
| /* MGCOGE */ |
| #if defined(CONFIG_MGCOGE) |
| #define CONFIG_SYS_MAX_FLASH_BANKS 3 |
| /* max num of sects on one chip */ |
| #define CONFIG_SYS_MAX_FLASH_SECT 512 |
| |
| #define CONFIG_SYS_FLASH_BASE_1 0x50000000 |
| #define CONFIG_SYS_FLASH_SIZE_1 32 |
| #define CONFIG_SYS_FLASH_BASE_2 0x52000000 |
| #define CONFIG_SYS_FLASH_SIZE_2 32 |
| |
| #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \ |
| CONFIG_SYS_FLASH_BASE_1, \ |
| CONFIG_SYS_FLASH_BASE_2 } |
| #define MTDIDS_DEFAULT "nor3=app" |
| |
| /* |
| * Bank 1 - 60x bus SDRAM |
| */ |
| #define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */ |
| #define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (256 << 20) /* less than 256 MB */ |
| |
| /* SDRAM initialization values |
| */ |
| |
| #define CONFIG_SYS_OR1 ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & \ |
| ORxS_SDAM_MSK) |\ |
| ORxS_BPD_8 |\ |
| ORxS_ROWST_PBI0_A7 |\ |
| ORxS_NUMR_13) |
| |
| #define CONFIG_SYS_PSDMR ( \ |
| PSDMR_SDAM_A14_IS_A5 |\ |
| PSDMR_BSMA_A14_A16 |\ |
| PSDMR_SDA10_PBI0_A9 |\ |
| PSDMR_RFRC_5_CLK |\ |
| PSDMR_PRETOACT_2W |\ |
| PSDMR_ACTTORW_2W |\ |
| PSDMR_LDOTOPRE_1C |\ |
| PSDMR_WRC_1C |\ |
| PSDMR_CL_2) |
| |
| /* MGCOGE3NE */ |
| #elif defined(CONFIG_MGCOGE3NE) |
| #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks */ |
| #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* |
| * max num of sects on one |
| * chip |
| */ |
| |
| #define CONFIG_SYS_FLASH_BASE_1 0x50000000 |
| #define CONFIG_SYS_FLASH_SIZE_1 128 |
| |
| #define CONFIG_SYS_FLASH_SIZE_2 0 /* dummy value to calc SYS_OR5 */ |
| |
| #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \ |
| CONFIG_SYS_FLASH_BASE_1 } |
| |
| #define MTDIDS_DEFAULT "nor2=app" |
| |
| /* |
| * Bank 1 - 60x bus SDRAM |
| * mgcoge3ne has 256MB |
| * mgcoge2ne has 128MB |
| */ |
| #define SDRAM_MAX_SIZE 0x10000000 /* max. 256 MB */ |
| #define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (512 << 20) /* less than 512 MB */ |
| |
| #define CONFIG_SYS_OR1 ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & \ |
| ORxS_SDAM_MSK) |\ |
| ORxS_BPD_4 |\ |
| ORxS_NUMR_13 |\ |
| ORxS_IBID) |
| |
| #define CONFIG_SYS_PSDMR ( \ |
| PSDMR_PBI |\ |
| PSDMR_RFEN |\ |
| PSDMR_BSMA_A13_A15 |\ |
| PSDMR_RFRC_5_CLK |\ |
| PSDMR_PRETOACT_2W |\ |
| PSDMR_ACTTORW_2W |\ |
| PSDMR_LDOTOPRE_1C |\ |
| PSDMR_WRC_1C |\ |
| PSDMR_CL_2) |
| |
| #define CONFIG_SYS_SDRAM_LIST { \ |
| { .size = 256 << 20, \ |
| .or1 = ORxS_ROWST_PBI1_A4, \ |
| .psdmr = PSDMR_SDAM_A17_IS_A5 | PSDMR_SDA10_PBI1_A6, \ |
| }, \ |
| { .size = 128 << 20, \ |
| .or1 = ORxS_ROWST_PBI1_A5, \ |
| .psdmr = PSDMR_SDAM_A16_IS_A5 | PSDMR_SDA10_PBI1_A7, \ |
| }, \ |
| } |
| #endif /* defined(CONFIG_MGCOGE3NE) */ |
| |
| /* include further common stuff for all keymile 82xx boards */ |
| /* |
| * Select serial console configuration |
| * |
| * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then |
| * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 |
| * for SCC). |
| */ |
| #define CONFIG_CONS_ON_SMC /* Console is on SMC */ |
| #undef CONFIG_CONS_ON_SCC /* It's not on SCC */ |
| #undef CONFIG_CONS_NONE /* It's not on external UART */ |
| #define CONFIG_CONS_INDEX 2 /* SMC2 is used for console */ |
| #define CONFIG_SYS_SMC_RXBUFLEN 128 |
| #define CONFIG_SYS_MAXIDLE 10 |
| |
| /* |
| * Select ethernet configuration |
| * |
| * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, |
| * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for |
| * SCC, 1-3 for FCC) |
| * |
| * If CONFIG_ETHER_NONE is defined, then either the ethernet routines |
| * must be defined elsewhere (as for the console), or CONFIG_CMD_NET |
| * must be unset. |
| */ |
| #define CONFIG_ETHER_ON_SCC /* Ethernet is on SCC */ |
| #undef CONFIG_ETHER_ON_FCC /* Ethernet is not on FCC */ |
| #undef CONFIG_ETHER_NONE /* No external Ethernet */ |
| |
| #define CONFIG_ETHER_INDEX 4 |
| #define CONFIG_HAS_ETH0 |
| #define CONFIG_SYS_SCC_TOUT_LOOP 10000000 |
| |
| #define CONFIG_SYS_CMXSCR_VALUE (CMXSCR_RS4CS_CLK7 | CMXSCR_TS4CS_CLK8) |
| |
| #ifndef CONFIG_8260_CLKIN |
| #define CONFIG_8260_CLKIN 66000000 /* in Hz */ |
| #endif |
| |
| #define BOOTFLASH_START 0xFE000000 |
| |
| #define CONFIG_KM_CONSOLE_TTY "ttyCPM0" |
| |
| #define MTDPARTS_DEFAULT "mtdparts=" \ |
| "app:" \ |
| "768k(u-boot)," \ |
| "128k(env)," \ |
| "128k(envred)," \ |
| "3072k(free)," \ |
| "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ")" |
| |
| /* |
| * Default environment settings |
| */ |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| CONFIG_KM_BOARD_EXTRA_ENV \ |
| CONFIG_KM_DEF_ENV \ |
| "unlock=yes\0" \ |
| "newenv=" \ |
| "prot off 0xFE0C0000 +0x40000 && " \ |
| "era 0xFE0C0000 +0x40000\0" \ |
| "arch=ppc_82xx\0" \ |
| "" |
| |
| #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE |
| |
| #define CONFIG_SYS_MONITOR_LEN (768 << 10) |
| |
| #define CONFIG_ENV_IS_IN_FLASH |
| |
| #ifdef CONFIG_ENV_IS_IN_FLASH |
| #define CONFIG_ENV_SECT_SIZE 0x20000 |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ |
| CONFIG_SYS_MONITOR_LEN) |
| #define CONFIG_ENV_OFFSET CONFIG_SYS_MONITOR_LEN |
| |
| /* Address and size of Redundant Environment Sector */ |
| #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ |
| CONFIG_ENV_SECT_SIZE) |
| #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) |
| #endif /* CONFIG_ENV_IS_IN_FLASH */ |
| |
| /* enable I2C and select the hardware/software driver */ |
| #define CONFIG_SYS_I2C |
| #define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ |
| #define CONFIG_SYS_I2C_INIT_BOARD |
| #define CONFIG_SYS_NUM_I2C_BUSES 3 |
| #define CONFIG_SYS_I2C_MAX_HOPS 1 |
| #define CONFIG_SYS_I2C_SOFT_SPEED 50000 |
| #define CONFIG_SYS_I2C_SPEED CONFIG_SYS_I2C_SOFT_SPEED |
| #define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F |
| #define CONFIG_SYS_I2C_BUSES {{0, {I2C_NULL_HOP} }, \ |
| {0, {{I2C_MUX_PCA9542, 0x70, 0} } }, \ |
| {0, {{I2C_MUX_PCA9542, 0x70, 1} } } } |
| |
| #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ |
| #define CONFIG_KM_I2C_ABORT |
| |
| /* |
| * Software (bit-bang) I2C driver configuration |
| */ |
| |
| #define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */ |
| #define I2C_ACTIVE (iop->pdir |= 0x00010000) |
| #define I2C_TRISTATE (iop->pdir &= ~0x00010000) |
| #define I2C_READ ((iop->pdat & 0x00010000) != 0) |
| #define I2C_SDA(bit) do { \ |
| if (bit) \ |
| iop->pdat |= 0x00010000; \ |
| else \ |
| iop->pdat &= ~0x00010000; \ |
| } while (0) |
| #define I2C_SCL(bit) do { \ |
| if (bit) \ |
| iop->pdat |= 0x00020000; \ |
| else \ |
| iop->pdat &= ~0x00020000; \ |
| } while (0) |
| #define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ |
| |
| #ifndef __ASSEMBLY__ |
| void set_sda(int state); |
| void set_scl(int state); |
| int get_sda(void); |
| int get_scl(void); |
| #endif |
| |
| #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 |
| |
| #define CONFIG_SYS_IMMR 0xF0000000 |
| |
| #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR |
| #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* used size in DPRAM */ |
| #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ |
| GENERATED_GBL_DATA_SIZE) |
| #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
| |
| /* Hard reset configuration word */ |
| #define CONFIG_SYS_HRCW_MASTER 0x0604b211 |
| |
| /* No slaves */ |
| #define CONFIG_SYS_HRCW_SLAVE1 0 |
| #define CONFIG_SYS_HRCW_SLAVE2 0 |
| #define CONFIG_SYS_HRCW_SLAVE3 0 |
| #define CONFIG_SYS_HRCW_SLAVE4 0 |
| #define CONFIG_SYS_HRCW_SLAVE5 0 |
| #define CONFIG_SYS_HRCW_SLAVE6 0 |
| #define CONFIG_SYS_HRCW_SLAVE7 0 |
| |
| /* Initial Memory map for Linux */ |
| #define CONFIG_SYS_BOOTMAPSZ (8 << 20) |
| |
| #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPUs */ |
| #if defined(CONFIG_CMD_KGDB) |
| # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ |
| #endif |
| |
| #define CONFIG_SYS_HID0_INIT 0 |
| #define CONFIG_SYS_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE) |
| |
| #define CONFIG_SYS_HID2 0 |
| |
| #define CONFIG_SYS_SIUMCR 0x4020c200 |
| #define CONFIG_SYS_SYPCR 0xFFFFFF83 |
| #define CONFIG_SYS_BCR 0x10000000 |
| #define CONFIG_SYS_SCCR (SCCR_PCI_MODE | SCCR_PCI_MODCK) |
| |
| /* |
| *----------------------------------------------------------------------- |
| * RMR - Reset Mode Register 5-5 |
| *----------------------------------------------------------------------- |
| * turn on Checkstop Reset Enable |
| */ |
| #define CONFIG_SYS_RMR 0 |
| |
| /* |
| *----------------------------------------------------------------------- |
| * TMCNTSC - Time Counter Status and Control 4-40 |
| *----------------------------------------------------------------------- |
| * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk, |
| * and enable Time Counter |
| */ |
| #define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) |
| |
| /* |
| *----------------------------------------------------------------------- |
| * PISCR - Periodic Interrupt Status and Control 4-42 |
| *----------------------------------------------------------------------- |
| * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable |
| * Periodic timer |
| */ |
| #define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) |
| |
| /* |
| *----------------------------------------------------------------------- |
| * RCCR - RISC Controller Configuration 13-7 |
| *----------------------------------------------------------------------- |
| */ |
| #define CONFIG_SYS_RCCR 0 |
| |
| /* |
| * Init Memory Controller: |
| * |
| * Bank Bus Machine PortSz Device |
| * ---- --- ------- ------ ------ |
| * 0 60x GPCM 8 bit FLASH |
| * 1 60x SDRAM 32 bit SDRAM |
| * 3 60x GPCM 8 bit GPIO/PIGGY |
| * 5 60x GPCM 16 bit CFG-Flash |
| * |
| */ |
| /* Bank 0 - FLASH |
| */ |
| #define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK) |\ |
| BRx_PS_8 |\ |
| BRx_MS_GPCM_P |\ |
| BRx_V) |
| |
| #define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) |\ |
| ORxG_CSNT |\ |
| ORxG_ACS_DIV2 |\ |
| ORxG_SCY_5_CLK |\ |
| ORxG_TRLX) |
| |
| #define CONFIG_SYS_MPTPR 0x1800 |
| |
| /* |
| *----------------------------------------------------------------------------- |
| * Address for Mode Register Set (MRS) command |
| *----------------------------------------------------------------------------- |
| */ |
| #define CONFIG_SYS_MRS_OFFS 0x00000110 |
| #define CONFIG_SYS_PSRT 0x0e |
| |
| #define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) |\ |
| BRx_PS_64 |\ |
| BRx_MS_SDRAM_P |\ |
| BRx_V) |
| |
| #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR1 |
| |
| /* |
| * UPIO FPGA (GPIO/PIGGY) on CS3 initialization values |
| */ |
| #define CONFIG_SYS_KMBEC_FPGA_BASE 0x30000000 |
| #define CONFIG_SYS_KMBEC_FPGA_SIZE 128 |
| |
| #define CONFIG_SYS_BR3_PRELIM ((CONFIG_SYS_KMBEC_FPGA_BASE & BRx_BA_MSK) |\ |
| BRx_PS_8 | BRx_MS_GPCM_P | BRx_V) |
| |
| #define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_KMBEC_FPGA_SIZE) |\ |
| ORxG_CSNT | ORxG_ACS_DIV2 |\ |
| ORxG_SCY_3_CLK | ORxG_TRLX) |
| |
| /* |
| * BFTICU board FPGA on CS4 initialization values |
| */ |
| #define CONFIG_SYS_FPGA_BASE 0x40000000 |
| #define CONFIG_SYS_FPGA_SIZE 1 /*1KB*/ |
| |
| #define CONFIG_SYS_BR4_PRELIM ((CONFIG_SYS_FPGA_BASE & BRx_BA_MSK) |\ |
| BRx_PS_8 | BRx_MS_GPCM_P | BRx_V) |
| |
| #define CONFIG_SYS_OR4_PRELIM (P2SZ_TO_AM(CONFIG_SYS_FPGA_SIZE << 10) |\ |
| ORxG_CSNT | ORxG_ACS_DIV2 |\ |
| ORxG_SCY_3_CLK | ORxG_TRLX) |
| |
| /* |
| * CFG-Flash on CS5 initialization values |
| */ |
| #define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_FLASH_BASE_1 & BRx_BA_MSK) |\ |
| BRx_PS_16 | BRx_MS_GPCM_P | BRx_V) |
| |
| #define CONFIG_SYS_OR5_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE_1 + \ |
| CONFIG_SYS_FLASH_SIZE_2) |\ |
| ORxG_CSNT | ORxG_ACS_DIV2 |\ |
| ORxG_SCY_5_CLK | ORxG_TRLX) |
| |
| #define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */ |
| |
| #define OF_TBCLK (bd->bi_busfreq / 4) |
| #define OF_STDOUT_PATH "/soc/cpm/serial@11a90" |
| |
| #endif /* __CONFIG_H */ |