| // SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| /* |
| * Copyright 2014-2022 Toradex |
| * Copyright 2012 Freescale Semiconductor, Inc. |
| * Copyright 2011 Linaro Ltd. |
| */ |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/pwm/pwm.h> |
| |
| / { |
| model = "Toradex Apalis iMX6Q/D Module"; |
| compatible = "toradex,apalis_imx6q", "fsl,imx6q"; |
| |
| /* Will be filled by the bootloader */ |
| memory@10000000 { |
| device_type = "memory"; |
| reg = <0x10000000 0>; |
| }; |
| |
| backlight: backlight { |
| compatible = "pwm-backlight"; |
| brightness-levels = <0 45 63 88 119 158 203 255>; |
| default-brightness-level = <4>; |
| enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio_bl_on>; |
| power-supply = <®_module_3v3>; |
| pwms = <&pwm4 0 5000000 PWM_POLARITY_INVERTED>; |
| status = "disabled"; |
| }; |
| |
| clk_ov5640_osc: clk-ov5640-osc { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <24000000>; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio_keys>; |
| |
| wakeup { |
| debounce-interval = <10>; |
| gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; |
| label = "Wake-Up"; |
| linux,code = <KEY_WAKEUP>; |
| wakeup-source; |
| }; |
| }; |
| |
| lcd_display: disp0 { |
| compatible = "fsl,imx-parallel-display"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interface-pix-fmt = "rgb24"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ipu1_lcdif>; |
| status = "disabled"; |
| |
| port@0 { |
| reg = <0>; |
| |
| lcd_display_in: endpoint { |
| remote-endpoint = <&ipu1_di1_disp1>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| lcd_display_out: endpoint { |
| remote-endpoint = <&lcd_panel_in>; |
| }; |
| }; |
| }; |
| |
| panel_dpi: panel-dpi { |
| compatible = "edt,et057090dhu"; |
| backlight = <&backlight>; |
| |
| status = "disabled"; |
| |
| port { |
| lcd_panel_in: endpoint { |
| remote-endpoint = <&lcd_display_out>; |
| }; |
| }; |
| }; |
| |
| panel_lvds: panel-lvds { |
| compatible = "panel-lvds"; |
| backlight = <&backlight>; |
| status = "disabled"; |
| |
| port { |
| lvds_panel_in: endpoint { |
| remote-endpoint = <&lvds0_out>; |
| }; |
| }; |
| }; |
| |
| reg_module_3v3: regulator-module-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-always-on; |
| regulator-max-microvolt = <3300000>; |
| regulator-min-microvolt = <3300000>; |
| regulator-name = "+V3.3"; |
| }; |
| |
| reg_module_3v3_audio: regulator-module-3v3-audio { |
| compatible = "regulator-fixed"; |
| regulator-always-on; |
| regulator-max-microvolt = <3300000>; |
| regulator-min-microvolt = <3300000>; |
| regulator-name = "+V3.3_AUDIO"; |
| }; |
| |
| reg_ov5640_1v8_d_o_vdd: regulator-ov5640-1v8-d-o-vdd { |
| compatible = "regulator-fixed"; |
| regulator-always-on; |
| regulator-max-microvolt = <1800000>; |
| regulator-min-microvolt = <1800000>; |
| regulator-name = "DOVDD/DVDD_1.8V"; |
| /* Note: The CSI module uses on-board 3.3V_SW supply */ |
| vin-supply = <®_module_3v3>; |
| }; |
| |
| reg_ov5640_2v8_a_vdd: regulator-ov5640-2v8-a-vdd { |
| compatible = "regulator-fixed"; |
| regulator-always-on; |
| regulator-max-microvolt = <2800000>; |
| regulator-min-microvolt = <2800000>; |
| regulator-name = "AVDD/AFVDD_2.8V"; |
| /* Note: The CSI module uses on-board 3.3V_SW supply */ |
| vin-supply = <®_module_3v3>; |
| }; |
| |
| reg_usb_otg_vbus: regulator-usb-otg-vbus { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>; |
| regulator-max-microvolt = <5000000>; |
| regulator-min-microvolt = <5000000>; |
| regulator-name = "usb_otg_vbus"; |
| status = "disabled"; |
| }; |
| |
| /* on module USB hub */ |
| reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>; |
| regulator-max-microvolt = <5000000>; |
| regulator-min-microvolt = <5000000>; |
| regulator-name = "usb_host_vbus_hub"; |
| startup-delay-us = <2000>; |
| status = "okay"; |
| }; |
| |
| reg_usb_host_vbus: regulator-usb-host-vbus { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; |
| regulator-max-microvolt = <5000000>; |
| regulator-min-microvolt = <5000000>; |
| regulator-name = "usb_host_vbus"; |
| vin-supply = <®_usb_host_vbus_hub>; |
| status = "disabled"; |
| }; |
| |
| sound { |
| compatible = "fsl,imx-audio-sgtl5000"; |
| audio-codec = <&codec>; |
| audio-routing = |
| "LINE_IN", "Line In Jack", |
| "MIC_IN", "Mic Jack", |
| "Mic Jack", "Mic Bias", |
| "Headphone Jack", "HP_OUT"; |
| model = "imx6q-apalis-sgtl5000"; |
| mux-ext-port = <4>; |
| mux-int-port = <1>; |
| ssi-controller = <&ssi1>; |
| }; |
| |
| sound_spdif: sound-spdif { |
| compatible = "fsl,imx-audio-spdif"; |
| spdif-controller = <&spdif>; |
| spdif-in; |
| spdif-out; |
| model = "imx-spdif"; |
| status = "disabled"; |
| }; |
| }; |
| |
| &audmux { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_audmux>; |
| status = "okay"; |
| }; |
| |
| &can1 { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&pinctrl_flexcan1_default>; |
| pinctrl-1 = <&pinctrl_flexcan1_sleep>; |
| status = "disabled"; |
| }; |
| |
| &can2 { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&pinctrl_flexcan2_default>; |
| pinctrl-1 = <&pinctrl_flexcan2_sleep>; |
| status = "disabled"; |
| }; |
| |
| &clks { |
| fsl,pmic-stby-poweroff; |
| }; |
| |
| /* Apalis SPI1 */ |
| &ecspi1 { |
| cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi1>; |
| status = "disabled"; |
| }; |
| |
| /* Apalis SPI2 */ |
| &ecspi2 { |
| cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi2>; |
| status = "disabled"; |
| }; |
| |
| &gpio1 { |
| gpio-line-names = "MXM3_84", |
| "MXM3_4", |
| "MXM3_15/GPIO7", |
| "MXM3_96", |
| "MXM3_37", |
| "", |
| "MXM3_17/GPIO8", |
| "MXM3_14", |
| "MXM3_12", |
| "MXM3_2", |
| "MXM3_184", |
| "MXM3_180", |
| "MXM3_178", |
| "MXM3_176", |
| "MXM3_188", |
| "MXM3_186", |
| "MXM3_160", |
| "MXM3_162", |
| "MXM3_150", |
| "MXM3_144", |
| "MXM3_154", |
| "MXM3_146", |
| "", |
| "", |
| "MXM3_72"; |
| }; |
| |
| &gpio2 { |
| gpio-line-names = "MXM3_148", |
| "MXM3_152", |
| "MXM3_156", |
| "MXM3_158", |
| "MXM3_1/GPIO1", |
| "MXM3_3/GPIO2", |
| "MXM3_5/GPIO3", |
| "MXM3_7/GPIO4", |
| "MXM3_95", |
| "MXM3_6", |
| "MXM3_8", |
| "MXM3_123", |
| "MXM3_126", |
| "MXM3_128", |
| "MXM3_130", |
| "MXM3_132", |
| "MXM3_253", |
| "MXM3_251", |
| "MXM3_283", |
| "MXM3_281", |
| "MXM3_279", |
| "MXM3_277", |
| "MXM3_243", |
| "MXM3_235", |
| "MXM3_231", |
| "MXM3_229", |
| "MXM3_233", |
| "MXM3_198", |
| "MXM3_275", |
| "MXM3_273", |
| "MXM3_207", |
| "MXM3_122"; |
| }; |
| |
| &gpio3 { |
| gpio-line-names = "MXM3_271", |
| "MXM3_269", |
| "MXM3_301", |
| "MXM3_299", |
| "MXM3_297", |
| "MXM3_295", |
| "MXM3_293", |
| "MXM3_291", |
| "MXM3_289", |
| "MXM3_287", |
| "MXM3_249", |
| "MXM3_247", |
| "MXM3_245", |
| "MXM3_286", |
| "MXM3_239", |
| "MXM3_35", |
| "MXM3_205", |
| "MXM3_203", |
| "MXM3_201", |
| "MXM3_116", |
| "MXM3_114", |
| "MXM3_262", |
| "MXM3_274", |
| "MXM3_124", |
| "MXM3_110", |
| "MXM3_120", |
| "MXM3_263", |
| "MXM3_265", |
| "", |
| "MXM3_135", |
| "MXM3_261", |
| "MXM3_259"; |
| }; |
| |
| &gpio4 { |
| gpio-line-names = "", |
| "", |
| "", |
| "", |
| "", |
| "MXM3_194", |
| "MXM3_136", |
| "MXM3_134", |
| "MXM3_140", |
| "MXM3_138", |
| "", |
| "MXM3_220", |
| "", |
| "", |
| "MXM3_18", |
| "MXM3_16", |
| "", |
| "", |
| "MXM3_214", |
| "MXM3_216", |
| "MXM3_164"; |
| }; |
| |
| &gpio5 { |
| gpio-line-names = "MXM3_159", |
| "", |
| "", |
| "", |
| "MXM3_257", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "MXM3_200", |
| "MXM3_196", |
| "MXM3_204", |
| "MXM3_202", |
| "", |
| "", |
| "", |
| "", |
| "MXM3_191", |
| "MXM3_197", |
| "MXM3_77", |
| "MXM3_195", |
| "MXM3_221", |
| "MXM3_225", |
| "MXM3_223", |
| "MXM3_227", |
| "MXM3_209", |
| "MXM3_211", |
| "MXM3_118", |
| "MXM3_112", |
| "MXM3_187", |
| "MXM3_185"; |
| }; |
| |
| &gpio6 { |
| gpio-line-names = "MXM3_183", |
| "MXM3_181", |
| "MXM3_179", |
| "MXM3_177", |
| "MXM3_175", |
| "MXM3_173", |
| "MXM3_255", |
| "MXM3_83", |
| "MXM3_91", |
| "MXM3_13/GPIO6", |
| "MXM3_11/GPIO5", |
| "MXM3_79", |
| "", |
| "", |
| "MXM3_190", |
| "MXM3_193", |
| "MXM3_89"; |
| }; |
| |
| &gpio7 { |
| gpio-line-names = "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "MXM3_99", |
| "MXM3_85", |
| "MXM3_217", |
| "MXM3_215"; |
| }; |
| |
| &gpr { |
| ipu1_csi0_mux { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| port@1 { |
| reg = <1>; |
| ipu1_csi0_mux_from_parallel_sensor: endpoint { |
| remote-endpoint = <&adv7280_to_ipu1_csi0_mux>; |
| }; |
| }; |
| }; |
| }; |
| |
| &fec { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet>; |
| phy-mode = "rgmii-id"; |
| phy-handle = <ðphy>; |
| phy-reset-duration = <10>; |
| phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy: ethernet-phy@7 { |
| interrupt-parent = <&gpio1>; |
| interrupts = <30 IRQ_TYPE_LEVEL_LOW>; |
| reg = <7>; |
| }; |
| }; |
| }; |
| |
| &hdmi { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hdmi_ddc &pinctrl_hdmi_cec>; |
| status = "disabled"; |
| }; |
| |
| /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ |
| &i2c1 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| pinctrl-1 = <&pinctrl_i2c1_gpio>; |
| scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| status = "disabled"; |
| |
| atmel_mxt_ts: touchscreen@4a { |
| compatible = "atmel,maxtouch"; |
| /* These GPIOs are muxed with the iomuxc node */ |
| interrupt-parent = <&gpio6>; |
| interrupts = <10 IRQ_TYPE_EDGE_FALLING>; /* MXM3_11 */ |
| reg = <0x4a>; |
| reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* MXM3_13 */ |
| status = "disabled"; |
| }; |
| }; |
| |
| /* |
| * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and |
| * touch screen controller |
| */ |
| &i2c2 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| pinctrl-1 = <&pinctrl_i2c2_gpio>; |
| scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| status = "okay"; |
| |
| pmic: pmic@8 { |
| compatible = "fsl,pfuze100"; |
| fsl,pmic-stby-poweroff; |
| reg = <0x08>; |
| |
| regulators { |
| sw1a_reg: sw1ab { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-max-microvolt = <1875000>; |
| regulator-min-microvolt = <300000>; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw1c_reg: sw1c { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-max-microvolt = <1875000>; |
| regulator-min-microvolt = <300000>; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw3a_reg: sw3a { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-max-microvolt = <1975000>; |
| regulator-min-microvolt = <400000>; |
| }; |
| |
| swbst_reg: swbst { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-max-microvolt = <5150000>; |
| regulator-min-microvolt = <5000000>; |
| }; |
| |
| snvs_reg: vsnvs { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-max-microvolt = <3000000>; |
| regulator-min-microvolt = <1000000>; |
| }; |
| |
| vref_reg: vrefddr { |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| vgen1_reg: vgen1 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-max-microvolt = <1550000>; |
| regulator-min-microvolt = <800000>; |
| }; |
| |
| vgen2_reg: vgen2 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-max-microvolt = <1550000>; |
| regulator-min-microvolt = <800000>; |
| }; |
| |
| vgen3_reg: vgen3 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-max-microvolt = <3300000>; |
| regulator-min-microvolt = <1800000>; |
| }; |
| |
| vgen4_reg: vgen4 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-max-microvolt = <1800000>; |
| regulator-min-microvolt = <1800000>; |
| }; |
| |
| vgen5_reg: vgen5 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-max-microvolt = <3300000>; |
| regulator-min-microvolt = <1800000>; |
| }; |
| |
| vgen6_reg: vgen6 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-max-microvolt = <3300000>; |
| regulator-min-microvolt = <1800000>; |
| }; |
| }; |
| }; |
| |
| codec: sgtl5000@a { |
| compatible = "fsl,sgtl5000"; |
| #sound-dai-cells = <0>; |
| clocks = <&clks IMX6QDL_CLK_CKO>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sgtl5000>; |
| reg = <0x0a>; |
| VDDA-supply = <®_module_3v3_audio>; |
| VDDIO-supply = <®_module_3v3>; |
| VDDD-supply = <&vgen4_reg>; |
| }; |
| |
| /* STMPE811 touch screen controller */ |
| stmpe811@41 { |
| compatible = "st,stmpe811"; |
| blocks = <0x5>; |
| id = <0>; |
| interrupts = <10 IRQ_TYPE_LEVEL_LOW>; |
| interrupt-controller; |
| interrupt-parent = <&gpio4>; |
| irq-trigger = <0x1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_touch_int>; |
| reg = <0x41>; |
| /* 3.25 MHz ADC clock speed */ |
| st,adc-freq = <1>; |
| /* 12-bit ADC */ |
| st,mod-12b = <1>; |
| /* internal ADC reference */ |
| st,ref-sel = <0>; |
| /* ADC conversion time: 80 clocks */ |
| st,sample-time = <4>; |
| |
| stmpe_ts: stmpe_touchscreen { |
| compatible = "st,stmpe-ts"; |
| /* 8 sample average control */ |
| st,ave-ctrl = <3>; |
| /* 7 length fractional part in z */ |
| st,fraction-z = <7>; |
| /* |
| * 50 mA typical 80 mA max touchscreen drivers |
| * current limit value |
| */ |
| st,i-drive = <1>; |
| /* 1 ms panel driver settling time */ |
| st,settling = <3>; |
| /* 5 ms touch detect interrupt delay */ |
| st,touch-det-delay = <5>; |
| status = "disabled"; |
| }; |
| |
| stmpe_adc: stmpe_adc { |
| compatible = "st,stmpe-adc"; |
| #io-channel-cells = <1>; |
| /* forbid to use ADC channels 3-0 (touch) */ |
| st,norequest-mask = <0x0F>; |
| }; |
| }; |
| }; |
| |
| /* |
| * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier |
| * board) |
| */ |
| &i2c3 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| pinctrl-1 = <&pinctrl_i2c3_gpio>; |
| scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| status = "disabled"; |
| |
| adv_7280: adv7280@21 { |
| compatible = "adi,adv7280"; |
| adv,force-bt656-4; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ipu1_csi0>; |
| reg = <0x21>; |
| status = "disabled"; |
| |
| port { |
| adv7280_to_ipu1_csi0_mux: endpoint { |
| bus-width = <8>; |
| remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; |
| }; |
| }; |
| }; |
| |
| ov5640_csi_cam: ov5640_mipi@3c { |
| compatible = "ovti,ov5640"; |
| AVDD-supply = <®_ov5640_2v8_a_vdd>; |
| DOVDD-supply = <®_ov5640_1v8_d_o_vdd>; |
| DVDD-supply = <®_ov5640_1v8_d_o_vdd>; |
| clock-names = "xclk"; |
| clocks = <&clks IMX6QDL_CLK_CKO2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_cam_mclk>; |
| /* These GPIOs are muxed with the iomuxc node */ |
| powerdown-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; |
| reg = <0x3c>; |
| reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; |
| status = "disabled"; |
| |
| port { |
| ov5640_to_mipi_csi2: endpoint { |
| clock-lanes = <0>; |
| data-lanes = <1 2>; |
| remote-endpoint = <&mipi_csi_from_ov5640>; |
| }; |
| }; |
| }; |
| }; |
| |
| &ipu1_di1_disp1 { |
| remote-endpoint = <&lcd_display_in>; |
| }; |
| |
| &ldb { |
| lvds-channel@0 { |
| port@4 { |
| reg = <4>; |
| |
| lvds0_out: endpoint { |
| remote-endpoint = <&lvds_panel_in>; |
| }; |
| }; |
| }; |
| |
| lvds-channel@1 { |
| fsl,data-mapping = "spwg"; |
| fsl,data-width = <18>; |
| |
| port@4 { |
| reg = <4>; |
| |
| lvds1_out: endpoint { |
| }; |
| }; |
| }; |
| }; |
| |
| &mipi_csi { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| port@0 { |
| reg = <0>; |
| |
| mipi_csi_from_ov5640: endpoint { |
| clock-lanes = <0>; |
| data-lanes = <1 2>; |
| remote-endpoint = <&ov5640_to_mipi_csi2>; |
| }; |
| }; |
| }; |
| |
| &pwm1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm1>; |
| status = "disabled"; |
| }; |
| |
| &pwm2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm2>; |
| status = "disabled"; |
| }; |
| |
| &pwm3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm3>; |
| status = "disabled"; |
| }; |
| |
| &pwm4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm4>; |
| status = "disabled"; |
| }; |
| |
| &spdif { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_spdif>; |
| status = "disabled"; |
| }; |
| |
| &ssi1 { |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| fsl,dte-mode; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>; |
| uart-has-rtscts; |
| status = "disabled"; |
| }; |
| |
| &uart2 { |
| fsl,dte-mode; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2_dte>; |
| uart-has-rtscts; |
| status = "disabled"; |
| }; |
| |
| &uart4 { |
| fsl,dte-mode; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart4_dte>; |
| status = "disabled"; |
| }; |
| |
| &uart5 { |
| fsl,dte-mode; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart5_dte>; |
| status = "disabled"; |
| }; |
| |
| &usbotg { |
| disable-over-current; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg>; |
| status = "disabled"; |
| }; |
| |
| /* MMC1 */ |
| &usdhc1 { |
| bus-width = <8>; |
| cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>; |
| disable-wp; |
| no-1-8-v; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>; |
| vqmmc-supply = <®_module_3v3>; |
| status = "disabled"; |
| }; |
| |
| /* SD1 */ |
| &usdhc2 { |
| bus-width = <4>; |
| disable-wp; |
| no-1-8-v; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc2>; |
| vqmmc-supply = <®_module_3v3>; |
| status = "disabled"; |
| }; |
| |
| /* eMMC */ |
| &usdhc3 { |
| bus-width = <8>; |
| no-1-8-v; |
| non-removable; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| vqmmc-supply = <®_module_3v3>; |
| status = "okay"; |
| }; |
| |
| &weim { |
| status = "disabled"; |
| }; |
| |
| &iomuxc { |
| /* Mux the Apalis GPIOs */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2 |
| &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4 |
| &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6 |
| &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8 |
| >; |
| |
| pinctrl_apalis_gpio1: apalisgpio1grp { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0 |
| >; |
| }; |
| |
| pinctrl_apalis_gpio2: apalisgpio2grp { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0 |
| >; |
| }; |
| |
| pinctrl_apalis_gpio3: apalisgpio3grp { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0 |
| >; |
| }; |
| |
| pinctrl_apalis_gpio4: apalisgpio4grp { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0 |
| >; |
| }; |
| |
| pinctrl_apalis_gpio5: apalisgpio5grp { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0 |
| >; |
| }; |
| |
| pinctrl_apalis_gpio6: apalisgpio6grp { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0 |
| >; |
| }; |
| |
| pinctrl_apalis_gpio7: apalisgpio7grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0 |
| >; |
| }; |
| |
| pinctrl_apalis_gpio8: apalisgpio8grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0 |
| >; |
| }; |
| |
| pinctrl_audmux: audmuxgrp { |
| fsl,pins = < |
| MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 |
| MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 |
| MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 |
| MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 |
| >; |
| }; |
| |
| pinctrl_cam_mclk: cammclkgrp { |
| fsl,pins = < |
| /* CAM sys_mclk */ |
| MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0 |
| >; |
| }; |
| |
| pinctrl_ecspi1: ecspi1grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x100b1 |
| MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x100b1 |
| MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x100b1 |
| /* SPI1 cs */ |
| MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000b1 |
| >; |
| }; |
| |
| pinctrl_ecspi2: ecspi2grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 |
| MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 |
| MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 |
| /* SPI2 cs */ |
| MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1 |
| >; |
| }; |
| |
| pinctrl_enet: enetgrp { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 |
| MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 |
| MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 |
| MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 |
| MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 |
| MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 |
| MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 |
| MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 |
| MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 |
| MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 |
| MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 |
| MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 |
| MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 |
| MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 |
| MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 |
| /* Ethernet PHY reset */ |
| MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x000b0 |
| /* Ethernet PHY interrupt */ |
| MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x000b1 |
| >; |
| }; |
| |
| pinctrl_flexcan1_default: flexcan1defgrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 |
| MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_flexcan1_sleep: flexcan1slpgrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0 |
| MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0 |
| >; |
| }; |
| |
| pinctrl_flexcan2_default: flexcan2defgrp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 |
| MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 |
| >; |
| }; |
| pinctrl_flexcan2_sleep: flexcan2slpgrp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x0 |
| MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x0 |
| >; |
| }; |
| |
| pinctrl_gpio_bl_on: gpioblongrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_gpio_keys: gpio1io04grp { |
| fsl,pins = < |
| /* Power button */ |
| MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_hdmi_cec: hdmicecgrp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 |
| >; |
| }; |
| |
| pinctrl_hdmi_ddc: hdmiddcgrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1 |
| MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 |
| MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c1_gpio: i2c1gpiogrp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b8b1 |
| MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 |
| MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c2_gpio: i2c2gpiogrp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1 |
| MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 |
| MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c3_gpio: i2c3gpiogrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1 |
| MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_ipu1_csi0: ipu1csi0grp { /* parallel camera */ |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0xb0b1 |
| MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0xb0b1 |
| MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0xb0b1 |
| MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0xb0b1 |
| MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0xb0b1 |
| MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0xb0b1 |
| MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0xb0b1 |
| MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0xb0b1 |
| MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1 |
| MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0xb0b1 |
| MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0xb0b1 |
| >; |
| }; |
| |
| pinctrl_ipu1_lcdif: ipu1lcdifgrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK 0x61 |
| /* DE */ |
| MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15 0x61 |
| /* HSync */ |
| MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02 0x61 |
| /* VSync */ |
| MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03 0x61 |
| MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00 0x61 |
| MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01 0x61 |
| MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02 0x61 |
| MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03 0x61 |
| MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04 0x61 |
| MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05 0x61 |
| MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06 0x61 |
| MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07 0x61 |
| MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08 0x61 |
| MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09 0x61 |
| MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10 0x61 |
| MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11 0x61 |
| MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12 0x61 |
| MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13 0x61 |
| MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14 0x61 |
| MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15 0x61 |
| MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16 0x61 |
| MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17 0x61 |
| MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18 0x61 |
| MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19 0x61 |
| MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20 0x61 |
| MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21 0x61 |
| MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22 0x61 |
| MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23 0x61 |
| >; |
| }; |
| |
| pinctrl_ipu2_vdac: ipu2vdacgrp { |
| fsl,pins = < |
| MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0xd1 |
| MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15 0xd1 |
| MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02 0xd1 |
| MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03 0xd1 |
| MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 0xf9 |
| MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 0xf9 |
| MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 0xf9 |
| MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 0xf9 |
| MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 0xf9 |
| MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 0xf9 |
| MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 0xf9 |
| MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 0xf9 |
| MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 0xf9 |
| MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 0xf9 |
| MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 0xf9 |
| MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 0xf9 |
| MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 0xf9 |
| MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 0xf9 |
| MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 0xf9 |
| MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 0xf9 |
| >; |
| }; |
| |
| pinctrl_mmc_cd: mmccdgrp { |
| fsl,pins = < |
| /* MMC1 CD */ |
| MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0 |
| >; |
| }; |
| |
| pinctrl_pwm1: pwm1grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_pwm2: pwm2grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_pwm3: pwm3grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_pwm4: pwm4grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_regulator_usbh_pwr: regusbhpwrgrp { |
| fsl,pins = < |
| /* USBH_EN */ |
| MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058 |
| >; |
| }; |
| |
| pinctrl_regulator_usbhub_pwr: regusbhubpwrgrp { |
| fsl,pins = < |
| /* USBH_HUB_EN */ |
| MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058 |
| >; |
| }; |
| |
| pinctrl_regulator_usbotg_pwr: regusbotgpwrgrp { |
| fsl,pins = < |
| /* USBO1 power en */ |
| MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058 |
| >; |
| }; |
| |
| pinctrl_reset_moci: resetmocigrp { |
| fsl,pins = < |
| /* RESET_MOCI control */ |
| MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058 |
| >; |
| }; |
| |
| pinctrl_sd_cd: sdcdgrp { |
| fsl,pins = < |
| /* SD1 CD */ |
| MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0 |
| >; |
| }; |
| |
| pinctrl_sgtl5000: sgtl5000grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 |
| >; |
| }; |
| |
| pinctrl_spdif: spdifgrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 |
| MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_touch_int: touchintgrp { |
| fsl,pins = < |
| /* STMPE811 interrupt */ |
| MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 |
| >; |
| }; |
| |
| /* Additional DTR, DSR, DCD */ |
| pinctrl_uart1_ctrl: uart1ctrlgrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0 |
| MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0 |
| MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_uart1_dce: uart1dcegrp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| /* DTE mode */ |
| pinctrl_uart1_dte: uart1dtegrp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1 |
| MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1 |
| MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart2_dce: uart2dcegrp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 |
| MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| /* DTE mode */ |
| pinctrl_uart2_dte: uart2dtegrp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1 |
| MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1 |
| MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart4_dce: uart4dcegrp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| /* DTE mode */ |
| pinctrl_uart4_dte: uart4dtegrp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1b0b1 |
| MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart5_dce: uart5dcegrp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| /* DTE mode */ |
| pinctrl_uart5_dte: uart5dtegrp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x1b0b1 |
| MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usbotg: usbotggrp { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc1_4bit: usdhc1-4bitgrp { |
| fsl,pins = < |
| MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 |
| MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 |
| MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 |
| MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 |
| MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 |
| MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 |
| >; |
| }; |
| |
| pinctrl_usdhc1_8bit: usdhc1-8bitgrp { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071 |
| MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071 |
| MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071 |
| MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17071 |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071 |
| MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071 |
| MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071 |
| MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071 |
| MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071 |
| MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 |
| MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 |
| MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 |
| MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 |
| MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 |
| MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 |
| MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 |
| MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 |
| MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 |
| MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 |
| /* eMMC reset */ |
| MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 |
| >; |
| }; |
| }; |