| // SPDX-License-Identifier: GPL-2.0+ |
| // |
| // Copyright 2012 Freescale Semiconductor, Inc. |
| // Copyright 2011 Linaro Ltd. |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| |
| / { |
| chosen { |
| stdout-path = &uart4; |
| }; |
| |
| memory@10000000 { |
| device_type = "memory"; |
| reg = <0x10000000 0x80000000>; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio_leds>; |
| |
| user { |
| label = "debug"; |
| gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio_keys>; |
| |
| home { |
| label = "Home"; |
| gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_HOME>; |
| wakeup-source; |
| }; |
| |
| back { |
| label = "Back"; |
| gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_BACK>; |
| wakeup-source; |
| }; |
| |
| program { |
| label = "Program"; |
| gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_PROGRAM>; |
| wakeup-source; |
| }; |
| |
| volume-up { |
| label = "Volume Up"; |
| gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_VOLUMEUP>; |
| wakeup-source; |
| }; |
| |
| volume-down { |
| label = "Volume Down"; |
| gpios = <&gpio5 14 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_VOLUMEDOWN>; |
| wakeup-source; |
| }; |
| }; |
| |
| clocks { |
| codec_osc: anaclk2 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <24576000>; |
| }; |
| }; |
| |
| reg_audio: regulator-audio { |
| compatible = "regulator-fixed"; |
| regulator-name = "cs42888_supply"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| reg_usb_h1_vbus: regulator-usb-h1-vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb_h1_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_usb_otg_vbus: regulator-usb-otg-vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb_otg_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_can_en: regulator-can-en { |
| compatible = "regulator-fixed"; |
| regulator-name = "can-en"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&max7310_b 6 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_can_stby: regulator-can-stby { |
| compatible = "regulator-fixed"; |
| regulator-name = "can-stby"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| vin-supply = <®_can_en>; |
| }; |
| |
| sound-cs42888 { |
| compatible = "fsl,imx6-sabreauto-cs42888", |
| "fsl,imx-audio-cs42888"; |
| model = "imx-cs42888"; |
| audio-cpu = <&esai>; |
| audio-asrc = <&asrc>; |
| audio-codec = <&codec>; |
| audio-routing = |
| "Line Out Jack", "AOUT1L", |
| "Line Out Jack", "AOUT1R", |
| "Line Out Jack", "AOUT2L", |
| "Line Out Jack", "AOUT2R", |
| "Line Out Jack", "AOUT3L", |
| "Line Out Jack", "AOUT3R", |
| "Line Out Jack", "AOUT4L", |
| "Line Out Jack", "AOUT4R", |
| "AIN1L", "Line In Jack", |
| "AIN1R", "Line In Jack", |
| "AIN2L", "Line In Jack", |
| "AIN2R", "Line In Jack"; |
| }; |
| |
| sound-spdif { |
| compatible = "fsl,imx-audio-spdif", |
| "fsl,imx-sabreauto-spdif"; |
| model = "imx-spdif"; |
| spdif-controller = <&spdif>; |
| spdif-in; |
| }; |
| |
| backlight { |
| compatible = "pwm-backlight"; |
| pwms = <&pwm3 0 5000000>; |
| brightness-levels = <0 4 8 16 32 64 128 255>; |
| default-brightness-level = <7>; |
| status = "okay"; |
| }; |
| |
| i2cmux { |
| compatible = "i2c-mux-gpio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3mux>; |
| mux-gpios = <&gpio5 4 0>; |
| i2c-parent = <&i2c3>; |
| idle-state = <0>; |
| |
| i2c@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| adv7180: camera@21 { |
| compatible = "adi,adv7180"; |
| reg = <0x21>; |
| powerdown-gpios = <&max7310_b 2 GPIO_ACTIVE_LOW>; |
| interrupt-parent = <&gpio1>; |
| interrupts = <27 IRQ_TYPE_LEVEL_LOW>; |
| |
| port { |
| adv7180_to_ipu1_csi0_mux: endpoint { |
| remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; |
| bus-width = <8>; |
| }; |
| }; |
| }; |
| |
| max7310_a: gpio@30 { |
| compatible = "maxim,max7310"; |
| reg = <0x30>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| max7310_b: gpio@32 { |
| compatible = "maxim,max7310"; |
| reg = <0x32>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_max7310>; |
| reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; |
| }; |
| |
| max7310_c: gpio@34 { |
| compatible = "maxim,max7310"; |
| reg = <0x34>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| light-sensor@44 { |
| compatible = "isil,isl29023"; |
| reg = <0x44>; |
| interrupt-parent = <&gpio5>; |
| interrupts = <17 IRQ_TYPE_EDGE_FALLING>; |
| }; |
| |
| magnetometer@e { |
| compatible = "fsl,mag3110"; |
| reg = <0x0e>; |
| interrupt-parent = <&gpio2>; |
| interrupts = <29 IRQ_TYPE_EDGE_RISING>; |
| }; |
| |
| accelerometer@1c { |
| compatible = "fsl,mma8451"; |
| reg = <0x1c>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_mma8451_int>; |
| interrupt-parent = <&gpio6>; |
| interrupts = <31 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| }; |
| }; |
| }; |
| |
| &ipu1_csi0_from_ipu1_csi0_mux { |
| bus-width = <8>; |
| }; |
| |
| &ipu1_csi0_mux_from_parallel_sensor { |
| remote-endpoint = <&adv7180_to_ipu1_csi0_mux>; |
| bus-width = <8>; |
| }; |
| |
| &ipu1_csi0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ipu1_csi0>; |
| }; |
| |
| &clks { |
| assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>, |
| <&clks IMX6QDL_PLL4_BYPASS>, |
| <&clks IMX6QDL_CLK_LDB_DI0_SEL>, |
| <&clks IMX6QDL_CLK_LDB_DI1_SEL>, |
| <&clks IMX6QDL_CLK_PLL4_POST_DIV>; |
| assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>, |
| <&clks IMX6QDL_PLL4_BYPASS_SRC>, |
| <&clks IMX6QDL_CLK_PLL3_USB_OTG>, |
| <&clks IMX6QDL_CLK_PLL3_USB_OTG>; |
| assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>; |
| }; |
| |
| &ecspi1 { |
| cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; |
| status = "disabled"; /* pin conflict with WEIM NOR */ |
| |
| flash: flash@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "st,m25p32", "jedec,spi-nor"; |
| spi-max-frequency = <20000000>; |
| reg = <0>; |
| }; |
| }; |
| |
| &esai { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_esai>; |
| assigned-clocks = <&clks IMX6QDL_CLK_ESAI_SEL>, |
| <&clks IMX6QDL_CLK_ESAI_EXTAL>; |
| assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>; |
| assigned-clock-rates = <0>, <24576000>; |
| status = "okay"; |
| }; |
| |
| &fec { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet>; |
| phy-mode = "rgmii-id"; |
| interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; |
| fsl,err006687-workaround-present; |
| fsl,magic-packet; |
| status = "okay"; |
| }; |
| |
| &can1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan1>; |
| xceiver-supply = <®_can_stby>; |
| status = "disabled"; /* pin conflict with fec */ |
| }; |
| |
| &can2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan2>; |
| xceiver-supply = <®_can_stby>; |
| status = "okay"; |
| }; |
| |
| &gpmi { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpmi_nand>; |
| status = "okay"; |
| }; |
| |
| &hdmi { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hdmi_cec>; |
| ddc-i2c-bus = <&i2c2>; |
| status = "okay"; |
| }; |
| |
| &i2c2 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| status = "okay"; |
| |
| pmic: pfuze100@8 { |
| compatible = "fsl,pfuze100"; |
| reg = <0x08>; |
| |
| regulators { |
| sw1a_reg: sw1ab { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw1c_reg: sw1c { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw2_reg: sw2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw3a_reg: sw3a { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1975000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw3b_reg: sw3b { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1975000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw4_reg: sw4 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| swbst_reg: swbst { |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5150000>; |
| }; |
| |
| snvs_reg: vsnvs { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vref_reg: vrefddr { |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vgen1_reg: vgen1 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| }; |
| |
| vgen2_reg: vgen2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| }; |
| |
| vgen3_reg: vgen3 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| vgen4_reg: vgen4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen5_reg: vgen5 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen6_reg: vgen6 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| |
| codec: cs42888@48 { |
| compatible = "cirrus,cs42888"; |
| reg = <0x48>; |
| clocks = <&codec_osc>; |
| clock-names = "mclk"; |
| VA-supply = <®_audio>; |
| VD-supply = <®_audio>; |
| VLS-supply = <®_audio>; |
| VLC-supply = <®_audio>; |
| }; |
| |
| touchscreen@4 { |
| compatible = "eeti,egalax_ts"; |
| reg = <0x04>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_egalax_int>; |
| interrupt-parent = <&gpio2>; |
| interrupts = <28 IRQ_TYPE_EDGE_FALLING>; |
| wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| &i2c3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog>; |
| |
| imx6qdl-sabreauto { |
| pinctrl_hog: hoggrp { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000 |
| MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x80000000 |
| MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059 |
| >; |
| }; |
| |
| pinctrl_ecspi1: ecspi1grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 |
| MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 |
| MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 |
| >; |
| }; |
| |
| pinctrl_ecspi1_cs: ecspi1cs { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 |
| >; |
| }; |
| |
| pinctrl_egalax_int: egalax-intgrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0xb0b1 |
| >; |
| }; |
| |
| pinctrl_enet: enetgrp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0 |
| MX6QDL_PAD_KEY_COL2__ENET_MDC 0x1b0b0 |
| MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 |
| MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 |
| MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 |
| MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 |
| MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 |
| MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 |
| MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 |
| MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 |
| MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 |
| MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 |
| MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 |
| MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 |
| MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 |
| MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 |
| >; |
| }; |
| |
| pinctrl_esai: esaigrp { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030 |
| MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS 0x1b030 |
| MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030 |
| MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3 0x1b030 |
| MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1 0x1b030 |
| MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0 0x1b030 |
| MX6QDL_PAD_GPIO_17__ESAI_TX0 0x1b030 |
| MX6QDL_PAD_NANDF_CS3__ESAI_TX1 0x1b030 |
| MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK 0x1b030 |
| MX6QDL_PAD_GPIO_9__ESAI_RX_FS 0x1b030 |
| >; |
| }; |
| |
| pinctrl_flexcan1: flexcan1grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x17059 |
| MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x17059 |
| >; |
| }; |
| |
| pinctrl_flexcan2: flexcan2grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x17059 |
| MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x17059 |
| >; |
| }; |
| |
| pinctrl_gpio_keys: gpiokeysgrp { |
| fsl,pins = < |
| MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0 |
| MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0 |
| MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 |
| MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 |
| MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_gpio_leds: gpioledsgrp { |
| fsl,pins = < |
| MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x80000000 |
| >; |
| }; |
| |
| pinctrl_gpmi_nand: gpminandgrp { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 |
| MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 |
| MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 |
| MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 |
| MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 |
| MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 |
| MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 |
| MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 |
| MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 |
| MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 |
| MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 |
| MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 |
| MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 |
| MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 |
| MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 |
| MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 |
| MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 |
| >; |
| }; |
| |
| pinctrl_hdmi_cec: hdmicecgrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 |
| MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 |
| MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c3mux: i2c3muxgrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x0b0b1 |
| >; |
| }; |
| |
| pinctrl_ipu1_csi0: ipu1csi0grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 |
| MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 |
| MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 |
| MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_max7310: max7310grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_mma8451_int: mma8451intgrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb0b1 |
| >; |
| }; |
| |
| pinctrl_pwm3: pwm1grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_gpt_input_capture0: gptinputcapture0grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_gpt_input_capture1: gptinputcapture1grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_spdif: spdifgrp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_uart4: uart4grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usbotg: usbotggrp { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 |
| MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 |
| MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 |
| MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 |
| MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 |
| MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 |
| MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 |
| MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 |
| MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 |
| MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc3_100mhz: usdhc3grp100mhz { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 |
| MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 |
| MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 |
| MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 |
| MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 |
| MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 |
| MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 |
| MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 |
| MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 |
| MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 |
| >; |
| }; |
| |
| pinctrl_usdhc3_200mhz: usdhc3grp200mhz { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 |
| MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 |
| MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 |
| MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 |
| MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 |
| MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 |
| MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 |
| MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 |
| MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 |
| MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 |
| >; |
| }; |
| |
| pinctrl_weim_cs0: weimcs0grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1 |
| >; |
| }; |
| |
| pinctrl_weim_nor: weimnorgrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1 |
| MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1 |
| MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060 |
| MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0 |
| MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0 |
| MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0 |
| MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0 |
| MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0 |
| MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0 |
| MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0 |
| MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0 |
| MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0 |
| MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0 |
| MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0 |
| MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0 |
| MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0 |
| MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0 |
| MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0 |
| MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0 |
| MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1 |
| MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1 |
| MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1 |
| MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1 |
| MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1 |
| MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1 |
| MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1 |
| MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1 |
| MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1 |
| MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1 |
| MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1 |
| MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1 |
| MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1 |
| MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1 |
| MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1 |
| MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1 |
| MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1 |
| MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1 |
| MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1 |
| MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1 |
| MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1 |
| MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1 |
| MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1 |
| MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1 |
| >; |
| }; |
| }; |
| }; |
| |
| &ldb { |
| status = "okay"; |
| |
| lvds-channel@0 { |
| fsl,data-mapping = "spwg"; |
| fsl,data-width = <18>; |
| status = "okay"; |
| |
| display-timings { |
| native-mode = <&timing0>; |
| timing0: hsd100pxn1 { |
| clock-frequency = <65000000>; |
| hactive = <1024>; |
| vactive = <768>; |
| hback-porch = <220>; |
| hfront-porch = <40>; |
| vback-porch = <21>; |
| vfront-porch = <7>; |
| hsync-len = <60>; |
| vsync-len = <10>; |
| }; |
| }; |
| }; |
| }; |
| |
| &pwm3 { |
| #pwm-cells = <2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm3>; |
| status = "okay"; |
| }; |
| |
| &pcie { |
| status = "okay"; |
| }; |
| |
| &spdif { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_spdif>; |
| status = "okay"; |
| }; |
| |
| &uart4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart4>; |
| status = "okay"; |
| }; |
| |
| &usbh1 { |
| vbus-supply = <®_usb_h1_vbus>; |
| status = "okay"; |
| }; |
| |
| &usbotg { |
| vbus-supply = <®_usb_otg_vbus>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg>; |
| status = "okay"; |
| }; |
| |
| &usdhc3 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| pinctrl-1 = <&pinctrl_usdhc3_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc3_200mhz>; |
| cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; |
| wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; |
| status = "okay"; |
| }; |
| |
| &weim { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>; |
| ranges = <0 0 0x08000000 0x08000000>; |
| status = "disabled"; /* pin conflict with SPI NOR */ |
| |
| nor@0,0 { |
| compatible = "cfi-flash"; |
| reg = <0 0 0x02000000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| bank-width = <2>; |
| fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000 |
| 0x0000c000 0x1404a38e 0x00000000>; |
| }; |
| }; |