| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright 2022 Fabio Estevam <festevam@denx.de> |
| */ |
| |
| /dts-v1/; |
| |
| #include "imx8mm-tqma8mqml.dtsi" |
| |
| / { |
| model = "Cloos i.MX8MM PHG board"; |
| compatible = "cloos,imx8mm-phg", "tq,imx8mm-tqma8mqml", "fsl,imx8mm"; |
| |
| aliases { |
| mmc0 = &usdhc3; |
| mmc1 = &usdhc2; |
| }; |
| |
| chosen { |
| stdout-path = &uart2; |
| }; |
| |
| beeper { |
| compatible = "gpio-beeper"; |
| pinctrl-0 = <&pinctrl_beeper>; |
| gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio_led>; |
| |
| led-0 { |
| label = "status1"; |
| gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led-1 { |
| label = "status2"; |
| gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led-2 { |
| label = "status3"; |
| gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led-3 { |
| label = "run"; |
| gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led-4 { |
| label = "powerled"; |
| gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| reg_usb_otg_vbus: regulator-usb-otg-vbus { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_otg_vbus_ctrl>; |
| regulator-name = "usb_otg_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_usdhc2_vmmc: regulator-vmmc { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; |
| regulator-name = "VSD_3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| startup-delay-us = <100>; |
| off-on-delay-us = <12000>; |
| }; |
| }; |
| |
| &ecspi1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi1>; |
| cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| &fec1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_fec1>; |
| phy-mode = "rgmii-id"; |
| phy-handle = <ðphy0>; |
| fsl,magic-packet; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy0: ethernet-phy@0 { |
| reg = <0>; |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| }; |
| }; |
| }; |
| |
| &i2c2 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2>; |
| status = "okay"; |
| }; |
| |
| &usbphynop1 { |
| power-domains = <&pgc_otg1>; |
| }; |
| |
| &usbphynop2 { |
| power-domains = <&pgc_otg2>; |
| }; |
| |
| &usbotg1 { |
| dr_mode = "host"; |
| vbus-supply = <®_usb_otg_vbus>; |
| status = "okay"; |
| }; |
| |
| &usbotg2 { |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &usdhc2 { |
| assigned-clocks = <&clk IMX8MM_CLK_USDHC2>; |
| assigned-clock-rates = <400000000>; |
| assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_400M>; |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; |
| pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; |
| pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; |
| bus-width = <4>; |
| cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; |
| disable-wp; |
| no-mmc; |
| no-sdio; |
| sd-uhs-sdr104; |
| sd-uhs-ddr50; |
| vmmc-supply = <®_usdhc2_vmmc>; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl_beeper: beepergrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x19 |
| >; |
| }; |
| |
| pinctrl_ecspi1: ecspi1grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 |
| MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 |
| MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 |
| MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 |
| >; |
| }; |
| |
| pinctrl_fec1: fec1grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x40000002 |
| MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x40000002 |
| MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x14 |
| MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x14 |
| MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x14 |
| MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x14 |
| MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x90 |
| MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x90 |
| MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x90 |
| MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x90 |
| MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x14 |
| MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x90 |
| MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x90 |
| MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x14 |
| MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x10 |
| >; |
| }; |
| |
| pinctrl_gpio_led: gpioledgrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 |
| MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19 |
| MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 |
| MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 |
| MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x19 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 |
| MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 |
| >; |
| }; |
| |
| pinctrl_otg_vbus_ctrl: otgvbusctrlgrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2 0x119 |
| >; |
| }; |
| |
| pinctrl_uart2: uart2grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 |
| MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 |
| >; |
| }; |
| |
| pinctrl_usdhc2_gpio: usdhc2grpgpiogrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4 |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 |
| MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 |
| MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 |
| MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 |
| MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 |
| MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 |
| >; |
| }; |
| |
| pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 |
| MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 |
| MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 |
| MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 |
| MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 |
| MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 |
| >; |
| }; |
| |
| pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 |
| MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 |
| MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 |
| MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 |
| MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 |
| MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 |
| >; |
| }; |
| }; |