| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2022 MediaTek Inc. |
| * Author: Sam Shih <sam.shih@mediatek.com> |
| */ |
| |
| /dts-v1/; |
| #include "mt7988.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| model = "mt7988-rfb"; |
| compatible = "mediatek,mt7988-rfb"; |
| |
| chosen { |
| stdout-path = &uart0; |
| }; |
| |
| memory@40000000 { |
| device_type = "memory"; |
| reg = <0 0x40000000 0 0x10000000>; |
| }; |
| |
| reg_3p3v: regulator-3p3v { |
| compatible = "regulator-fixed"; |
| regulator-name = "fixed-3.3V"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_1p8v: regulator-1p8v { |
| compatible = "regulator-fixed"; |
| regulator-name = "fixed-1.8V"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| }; |
| |
| &i2c1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_pins>; |
| status = "okay"; |
| }; |
| |
| ð { |
| status = "okay"; |
| mediatek,gmac-id = <0>; |
| phy-mode = "usxgmii"; |
| mediatek,switch = "mt7988"; |
| |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| pause; |
| }; |
| }; |
| |
| &pinctrl { |
| i2c1_pins: i2c1-pins { |
| mux { |
| function = "i2c"; |
| groups = "i2c1_0"; |
| }; |
| }; |
| |
| pwm_pins: pwm-pins { |
| mux { |
| function = "pwm"; |
| groups = "pwm0", "pwm1", "pwm2", "pwm3", "pwm4", |
| "pwm5", "pwm6", "pwm7"; |
| }; |
| }; |
| |
| spi0_pins: spi0-pins { |
| mux { |
| function = "spi"; |
| groups = "spi0", "spi0_wp_hold"; |
| }; |
| }; |
| |
| spi2_pins: spi2-pins { |
| mux { |
| function = "spi"; |
| groups = "spi2", "spi2_wp_hold"; |
| }; |
| }; |
| |
| mmc0_pins_default: mmc0default { |
| mux { |
| function = "flash"; |
| groups = "emmc_51"; |
| }; |
| |
| conf-cmd-dat { |
| pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", |
| "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", |
| "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; |
| input-enable; |
| }; |
| |
| conf-clk { |
| pins = "EMMC_CK"; |
| }; |
| |
| conf-dsl { |
| pins = "EMMC_DSL"; |
| }; |
| |
| conf-rst { |
| pins = "EMMC_RSTB"; |
| }; |
| }; |
| }; |
| |
| &pwm { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm_pins>; |
| status = "okay"; |
| }; |
| |
| &spi0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi0_pins>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "okay"; |
| must_tx; |
| enhance_timing; |
| dma_ext; |
| ipm_design; |
| support_quad; |
| tick_dly = <2>; |
| sample_sel = <0>; |
| |
| spi_nand@0 { |
| compatible = "spi-nand"; |
| reg = <0>; |
| spi-max-frequency = <52000000>; |
| }; |
| }; |
| |
| &spi2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi2_pins>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "okay"; |
| must_tx; |
| enhance_timing; |
| dma_ext; |
| ipm_design; |
| support_quad; |
| tick_dly = <2>; |
| sample_sel = <0>; |
| |
| spi_nor@0 { |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <52000000>; |
| }; |
| }; |
| |
| &mmc0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc0_pins_default>; |
| max-frequency = <52000000>; |
| bus-width = <8>; |
| cap-mmc-highspeed; |
| cap-mmc-hw-reset; |
| vmmc-supply = <®_3p3v>; |
| vqmmc-supply = <®_1p8v>; |
| non-removable; |
| status = "okay"; |
| }; |