| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Base Device Tree Source for the Renesas RZ/N1D (R9A06G032) |
| * |
| * Copyright (C) 2018 Renesas Electronics Europe Limited |
| * |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/r9a06g032-sysctrl.h> |
| |
| / { |
| compatible = "renesas,r9a06g032"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0>; |
| clocks = <&sysctrl R9A06G032_CLK_A7MP>; |
| }; |
| |
| cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <1>; |
| clocks = <&sysctrl R9A06G032_CLK_A7MP>; |
| enable-method = "renesas,r9a06g032-smp"; |
| cpu-release-addr = <0 0x4000c204>; |
| }; |
| }; |
| |
| ext_jtag_clk: extjtagclk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <0>; |
| }; |
| |
| ext_mclk: extmclk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <40000000>; |
| }; |
| |
| ext_rgmii_ref: extrgmiiref { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <0>; |
| }; |
| |
| ext_rtc_clk: extrtcclk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <0>; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-parent = <&gic>; |
| ranges; |
| |
| rtc0: rtc@40006000 { |
| compatible = "renesas,r9a06g032-rtc", "renesas,rzn1-rtc"; |
| reg = <0x40006000 0x1000>; |
| interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "alarm", "timer", "pps"; |
| clocks = <&sysctrl R9A06G032_HCLK_RTC>; |
| clock-names = "hclk"; |
| power-domains = <&sysctrl>; |
| status = "disabled"; |
| }; |
| |
| wdt0: watchdog@40008000 { |
| compatible = "renesas,r9a06g032-wdt", "renesas,rzn1-wdt"; |
| reg = <0x40008000 0x1000>; |
| interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; |
| clocks = <&sysctrl R9A06G032_CLK_WATCHDOG>; |
| status = "disabled"; |
| }; |
| |
| wdt1: watchdog@40009000 { |
| compatible = "renesas,r9a06g032-wdt", "renesas,rzn1-wdt"; |
| reg = <0x40009000 0x1000>; |
| interrupts = <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>; |
| clocks = <&sysctrl R9A06G032_CLK_WATCHDOG>; |
| status = "disabled"; |
| }; |
| |
| sysctrl: system-controller@4000c000 { |
| compatible = "renesas,r9a06g032-sysctrl"; |
| reg = <0x4000c000 0x1000>; |
| status = "okay"; |
| #clock-cells = <1>; |
| #power-domain-cells = <0>; |
| |
| clocks = <&ext_mclk>, <&ext_rtc_clk>, |
| <&ext_jtag_clk>, <&ext_rgmii_ref>; |
| clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| dmamux: dma-router@a0 { |
| compatible = "renesas,rzn1-dmamux"; |
| reg = <0xa0 4>; |
| #dma-cells = <6>; |
| dma-requests = <32>; |
| dma-masters = <&dma0 &dma1>; |
| }; |
| }; |
| |
| udc: usb@4001e000 { |
| compatible = "renesas,r9a06g032-usbf", "renesas,rzn1-usbf"; |
| reg = <0x4001e000 0x2000>; |
| interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&sysctrl R9A06G032_HCLK_USBF>, |
| <&sysctrl R9A06G032_HCLK_USBPM>; |
| clock-names = "hclkf", "hclkpm"; |
| power-domains = <&sysctrl>; |
| status = "disabled"; |
| }; |
| |
| pci_usb: pci@40030000 { |
| compatible = "renesas,pci-r9a06g032", "renesas,pci-rzn1"; |
| device_type = "pci"; |
| clocks = <&sysctrl R9A06G032_HCLK_USBH>, |
| <&sysctrl R9A06G032_HCLK_USBPM>, |
| <&sysctrl R9A06G032_CLK_PCI_USB>; |
| clock-names = "hclkh", "hclkpm", "pciclk"; |
| power-domains = <&sysctrl>; |
| reg = <0x40030000 0xc00>, |
| <0x40020000 0x1100>; |
| interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| |
| bus-range = <0 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| #interrupt-cells = <1>; |
| ranges = <0x02000000 0 0x40020000 0x40020000 0 0x00010000>; |
| /* Should map all possible DDR as inbound ranges, but |
| * the IP only supports a 256MB, 512MB, or 1GB window. |
| * flags, PCI addr (64-bit), CPU addr, PCI size (64-bit) |
| */ |
| dma-ranges = <0x42000000 0 0x80000000 0x80000000 0 0x40000000>; |
| interrupt-map-mask = <0xf800 0 0 0x7>; |
| interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH |
| 0x0800 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH |
| 0x1000 0 0 2 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| |
| usb@1,0 { |
| reg = <0x800 0 0 0 0>; |
| phys = <&usbphy>; |
| phy-names = "usb"; |
| }; |
| |
| usb@2,0 { |
| reg = <0x1000 0 0 0 0>; |
| phys = <&usbphy>; |
| phy-names = "usb"; |
| }; |
| }; |
| |
| uart0: serial@40060000 { |
| compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart"; |
| reg = <0x40060000 0x400>; |
| interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&sysctrl R9A06G032_CLK_UART0>, <&sysctrl R9A06G032_HCLK_UART0>; |
| clock-names = "baudclk", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@40061000 { |
| compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart"; |
| reg = <0x40061000 0x400>; |
| interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&sysctrl R9A06G032_CLK_UART1>, <&sysctrl R9A06G032_HCLK_UART1>; |
| clock-names = "baudclk", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@40062000 { |
| compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart"; |
| reg = <0x40062000 0x400>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&sysctrl R9A06G032_CLK_UART2>, <&sysctrl R9A06G032_HCLK_UART2>; |
| clock-names = "baudclk", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@50000000 { |
| compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; |
| reg = <0x50000000 0x400>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>; |
| clock-names = "baudclk", "apb_pclk"; |
| dmas = <&dmamux 0 0 0 0 0 1>, <&dmamux 1 0 0 0 1 1>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@50001000 { |
| compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; |
| reg = <0x50001000 0x400>; |
| interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>; |
| clock-names = "baudclk", "apb_pclk"; |
| dmas = <&dmamux 2 0 0 0 2 1>, <&dmamux 3 0 0 0 3 1>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart5: serial@50002000 { |
| compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; |
| reg = <0x50002000 0x400>; |
| interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>; |
| clock-names = "baudclk", "apb_pclk"; |
| dmas = <&dmamux 4 0 0 0 4 1>, <&dmamux 5 0 0 0 5 1>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart6: serial@50003000 { |
| compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; |
| reg = <0x50003000 0x400>; |
| interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>; |
| clock-names = "baudclk", "apb_pclk"; |
| dmas = <&dmamux 6 0 0 0 6 1>, <&dmamux 7 0 0 0 7 1>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart7: serial@50004000 { |
| compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; |
| reg = <0x50004000 0x400>; |
| interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>; |
| clock-names = "baudclk", "apb_pclk"; |
| dmas = <&dmamux 4 0 0 0 20 1>, <&dmamux 5 0 0 0 21 1>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| pinctrl: pinctrl@40067000 { |
| compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl"; |
| reg = <0x40067000 0x1000>, <0x51000000 0x480>; |
| clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>; |
| clock-names = "bus"; |
| status = "okay"; |
| }; |
| |
| nand_controller: nand-controller@40102000 { |
| compatible = "renesas,r9a06g032-nandc", "renesas,rzn1-nandc"; |
| reg = <0x40102000 0x2000>; |
| interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&sysctrl R9A06G032_HCLK_NAND>, <&sysctrl R9A06G032_CLK_NAND>; |
| clock-names = "hclk", "eclk"; |
| power-domains = <&sysctrl>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| dma0: dma-controller@40104000 { |
| compatible = "renesas,r9a06g032-dma", "renesas,rzn1-dma"; |
| reg = <0x40104000 0x1000>; |
| interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "hclk"; |
| clocks = <&sysctrl R9A06G032_HCLK_DMA0>; |
| dma-channels = <8>; |
| dma-requests = <16>; |
| dma-masters = <1>; |
| #dma-cells = <3>; |
| block_size = <0xfff>; |
| data-width = <8>; |
| }; |
| |
| dma1: dma-controller@40105000 { |
| compatible = "renesas,r9a06g032-dma", "renesas,rzn1-dma"; |
| reg = <0x40105000 0x1000>; |
| interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "hclk"; |
| clocks = <&sysctrl R9A06G032_HCLK_DMA1>; |
| dma-channels = <8>; |
| dma-requests = <16>; |
| dma-masters = <1>; |
| #dma-cells = <3>; |
| block_size = <0xfff>; |
| data-width = <8>; |
| }; |
| |
| gmac2: ethernet@44002000 { |
| compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac"; |
| reg = <0x44002000 0x2000>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; |
| clocks = <&sysctrl R9A06G032_HCLK_GMAC1>; |
| clock-names = "stmmaceth"; |
| power-domains = <&sysctrl>; |
| snps,multicast-filter-bins = <256>; |
| snps,perfect-filter-entries = <128>; |
| tx-fifo-depth = <2048>; |
| rx-fifo-depth = <4096>; |
| status = "disabled"; |
| }; |
| |
| eth_miic: eth-miic@44030000 { |
| compatible = "renesas,r9a06g032-miic", "renesas,rzn1-miic"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x44030000 0x10000>; |
| clocks = <&sysctrl R9A06G032_CLK_MII_REF>, |
| <&sysctrl R9A06G032_CLK_RGMII_REF>, |
| <&sysctrl R9A06G032_CLK_RMII_REF>, |
| <&sysctrl R9A06G032_HCLK_SWITCH_RG>; |
| clock-names = "mii_ref", "rgmii_ref", "rmii_ref", "hclk"; |
| power-domains = <&sysctrl>; |
| status = "disabled"; |
| |
| mii_conv1: mii-conv@1 { |
| reg = <1>; |
| status = "disabled"; |
| }; |
| |
| mii_conv2: mii-conv@2 { |
| reg = <2>; |
| status = "disabled"; |
| }; |
| |
| mii_conv3: mii-conv@3 { |
| reg = <3>; |
| status = "disabled"; |
| }; |
| |
| mii_conv4: mii-conv@4 { |
| reg = <4>; |
| status = "disabled"; |
| }; |
| |
| mii_conv5: mii-conv@5 { |
| reg = <5>; |
| status = "disabled"; |
| }; |
| }; |
| |
| switch: switch@44050000 { |
| compatible = "renesas,r9a06g032-a5psw", "renesas,rzn1-a5psw"; |
| reg = <0x44050000 0x10000>; |
| clocks = <&sysctrl R9A06G032_HCLK_SWITCH>, |
| <&sysctrl R9A06G032_CLK_SWITCH>; |
| clock-names = "hclk", "clk"; |
| power-domains = <&sysctrl>; |
| status = "disabled"; |
| |
| ethernet-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| switch_port0: port@0 { |
| reg = <0>; |
| pcs-handle = <&mii_conv5>; |
| status = "disabled"; |
| }; |
| |
| switch_port1: port@1 { |
| reg = <1>; |
| pcs-handle = <&mii_conv4>; |
| status = "disabled"; |
| }; |
| |
| switch_port2: port@2 { |
| reg = <2>; |
| pcs-handle = <&mii_conv3>; |
| status = "disabled"; |
| }; |
| |
| switch_port3: port@3 { |
| reg = <3>; |
| pcs-handle = <&mii_conv2>; |
| status = "disabled"; |
| }; |
| |
| switch_port4: port@4 { |
| reg = <4>; |
| ethernet = <&gmac2>; |
| label = "cpu"; |
| phy-mode = "internal"; |
| status = "disabled"; |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| }; |
| }; |
| }; |
| }; |
| |
| gic: interrupt-controller@44101000 { |
| compatible = "arm,gic-400", "arm,cortex-a7-gic"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| reg = <0x44101000 0x1000>, /* Distributer */ |
| <0x44102000 0x2000>, /* CPU interface */ |
| <0x44104000 0x2000>, /* Virt interface control */ |
| <0x44106000 0x2000>; /* Virt CPU interface */ |
| interrupts = |
| <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| can0: can@52104000 { |
| compatible = "renesas,r9a06g032-sja1000","renesas,rzn1-sja1000"; |
| reg = <0x52104000 0x800>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&sysctrl R9A06G032_HCLK_CAN0>; |
| power-domains = <&sysctrl>; |
| status = "disabled"; |
| }; |
| |
| can1: can@52105000 { |
| compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000"; |
| reg = <0x52105000 0x800>; |
| reg-io-width = <4>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&sysctrl R9A06G032_HCLK_CAN1>; |
| power-domains = <&sysctrl>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| interrupt-parent = <&gic>; |
| arm,cpu-registers-not-fw-configured; |
| always-on; |
| interrupts = |
| <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| usbphy: usb-phy { |
| #phy-cells = <0>; |
| compatible = "usb-nop-xceiv"; |
| status = "disabled"; |
| }; |
| }; |