| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * dts file for Xilinx Versal a2197 RevA System Controller |
| * |
| * (C) Copyright 2019, Xilinx, Inc. |
| * |
| * Michal Simek <michal.simek@amd.com> |
| */ |
| /dts-v1/; |
| |
| #include "zynqmp.dtsi" |
| #include "zynqmp-clk-ccf.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| model = "Versal System Controller on a2197 board RevA"; |
| compatible = "xlnx,zynqmp-a2197-revA", "xlnx,zynqmp-a2197", "xlnx,zynqmp"; |
| |
| aliases { |
| i2c0 = &i2c0; |
| nvmem0 = &eeprom1; |
| nvmem1 = &eeprom0; |
| serial0 = &uart0; |
| }; |
| |
| chosen { |
| bootargs = "earlycon"; |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x0 0x0 0x0 0x80000000>; |
| }; |
| }; |
| |
| &uart0 { /* uart0 MIO38-39 */ |
| status = "okay"; |
| }; |
| |
| &i2c0 { |
| status = "okay"; |
| bootph-all; |
| clock-frequency = <400000>; |
| i2c-mux@74 { /* this cover MGT board */ |
| compatible = "nxp,pca9548"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x74>; |
| bootph-all; |
| /* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */ |
| i2c@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| /* Use for storing information about SC board */ |
| eeprom0: eeprom@50 { /* u96 - 24LC32A - 256B */ |
| compatible = "atmel,24c32"; |
| bootph-all; |
| reg = <0x50>; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c1 { |
| status = "okay"; |
| bootph-all; |
| clock-frequency = <400000>; |
| i2c-mux@74 { /* This cover processor board */ |
| compatible = "nxp,pca9548"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x74>; |
| bootph-all; |
| /* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */ |
| i2c@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| /* Use for storing information about SC board */ |
| eeprom1: eeprom@50 { /* u96 - 24LC32A - 256B */ |
| compatible = "atmel,24c32"; |
| bootph-all; |
| reg = <0x50>; |
| }; |
| }; |
| }; |
| }; |