| How to use U-boot on Solid-run mx6 hummingboard |
| ----------------------------------------------- |
| |
| - Build U-boot for hummingboard: |
| |
| $ make mrproper |
| $ make mx6cuboxi_defconfig |
| $ make |
| |
| This will generate the SPL image called SPL and the u-boot.img. |
| |
| - Flash the SPL image into the SD card: |
| |
| sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync |
| |
| - Flash the u-boot.img image into the SD card: |
| |
| sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync |
| |
| - Insert the SD card in the hummingboard, power it up and U-boot messages |
| should come up. |