| if TARGET_LS1012ARDB |
| |
| config SYS_BOARD |
| default "ls1012ardb" |
| |
| config SYS_VENDOR |
| default "freescale" |
| |
| config SYS_SOC |
| default "fsl-layerscape" |
| |
| config SYS_CONFIG_NAME |
| default "ls1012ardb" |
| |
| config SYS_LS_PPA_FW_ADDR |
| hex "PPA Firmware Addr" |
| default 0x40400000 |
| |
| if CHAIN_OF_TRUST |
| config SYS_LS_PPA_ESBC_ADDR |
| hex "PPA Firmware HDR Addr" |
| default 0x40680000 |
| |
| config SYS_LS_PFE_ESBC_ADDR |
| hex "PFE Firmware HDR Addr" |
| default 0x40640000 |
| |
| config SYS_LS_PFE_ESBC_LENGTH |
| hex "length of PFE Firmware HDR" |
| default 0xc00 |
| endif |
| |
| if FSL_PFE |
| |
| config BOARD_SPECIFIC_OPTIONS # dummy |
| def_bool y |
| select PHYLIB |
| imply PHY_REALTEK |
| |
| config SYS_LS_PFE_FW_ADDR |
| hex "Flash address of PFE firmware" |
| default 0x40a00000 |
| |
| config SYS_LS_PFE_FW_LENGTH |
| hex "length of PFE firmware" |
| default 0x300000 |
| |
| config DDR_PFE_PHYS_BASEADDR |
| hex "PFE DDR physical base address" |
| default 0x03800000 |
| |
| config DDR_PFE_BASEADDR |
| hex "PFE DDR base address" |
| default 0x83800000 |
| |
| config PFE_EMAC1_PHY_ADDR |
| hex "PFE DDR base address" |
| default 0x2 |
| |
| config PFE_EMAC2_PHY_ADDR |
| hex "PFE DDR base address" |
| default 0x1 |
| |
| endif |
| |
| source "board/freescale/common/Kconfig" |
| |
| endif |
| |
| if TARGET_LS1012A2G5RDB |
| |
| config SYS_BOARD |
| default "ls1012ardb" |
| |
| config SYS_VENDOR |
| default "freescale" |
| |
| config SYS_SOC |
| default "fsl-layerscape" |
| |
| config SYS_CONFIG_NAME |
| default "ls1012a2g5rdb" |
| |
| config SYS_LS_PPA_FW_ADDR |
| hex "PPA Firmware Addr" |
| default 0x40400000 |
| |
| if FSL_PFE |
| |
| config BOARD_SPECIFIC_OPTIONS # dummy |
| def_bool y |
| select PHYLIB |
| imply PHYLIB_10G |
| imply PHY_AQUANTIA |
| |
| config SYS_LS_PFE_FW_ADDR |
| hex "Flash address of PFE firmware" |
| default 0x40a00000 |
| |
| config SYS_LS_PFE_FW_LENGTH |
| hex "length of PFE firmware" |
| default 0x300000 |
| |
| config DDR_PFE_PHYS_BASEADDR |
| hex "PFE DDR physical base address" |
| default 0x03800000 |
| |
| config DDR_PFE_BASEADDR |
| hex "PFE DDR base address" |
| default 0x83800000 |
| |
| config PFE_EMAC1_PHY_ADDR |
| hex "PFE DDR base address" |
| default 0x2 |
| |
| config PFE_EMAC2_PHY_ADDR |
| hex "PFE DDR base address" |
| default 0x1 |
| |
| endif |
| |
| source "board/freescale/common/Kconfig" |
| |
| endif |