| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2000-2011 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| */ |
| #include <common.h> |
| #include <bootstage.h> |
| #include <command.h> |
| #include <cpu_func.h> |
| #include <image.h> |
| #include <log.h> |
| #include <part.h> |
| |
| int common_diskboot(struct cmd_tbl *cmdtp, const char *intf, int argc, |
| char *const argv[]) |
| { |
| __maybe_unused int dev; |
| int part; |
| ulong addr = CONFIG_SYS_LOAD_ADDR; |
| ulong cnt; |
| struct disk_partition info; |
| #if defined(CONFIG_LEGACY_IMAGE_FORMAT) |
| image_header_t *hdr; |
| #endif |
| struct blk_desc *dev_desc; |
| |
| #if CONFIG_IS_ENABLED(FIT) |
| const void *fit_hdr = NULL; |
| #endif |
| |
| bootstage_mark(BOOTSTAGE_ID_IDE_START); |
| if (argc > 3) { |
| bootstage_error(BOOTSTAGE_ID_IDE_ADDR); |
| return CMD_RET_USAGE; |
| } |
| bootstage_mark(BOOTSTAGE_ID_IDE_ADDR); |
| |
| if (argc > 1) |
| addr = simple_strtoul(argv[1], NULL, 16); |
| |
| bootstage_mark(BOOTSTAGE_ID_IDE_BOOT_DEVICE); |
| |
| part = blk_get_device_part_str(intf, (argc == 3) ? argv[2] : NULL, |
| &dev_desc, &info, 1); |
| if (part < 0) { |
| bootstage_error(BOOTSTAGE_ID_IDE_TYPE); |
| return 1; |
| } |
| |
| dev = dev_desc->devnum; |
| bootstage_mark(BOOTSTAGE_ID_IDE_TYPE); |
| |
| printf("\nLoading from %s device %d, partition %d: " |
| "Name: %.32s Type: %.32s\n", intf, dev, part, info.name, |
| info.type); |
| |
| debug("First Block: " LBAFU ", # of blocks: " LBAFU |
| ", Block Size: %ld\n", |
| info.start, info.size, info.blksz); |
| |
| if (blk_dread(dev_desc, info.start, 1, (ulong *)addr) != 1) { |
| printf("** Read error on %d:%d\n", dev, part); |
| bootstage_error(BOOTSTAGE_ID_IDE_PART_READ); |
| return 1; |
| } |
| bootstage_mark(BOOTSTAGE_ID_IDE_PART_READ); |
| |
| switch (genimg_get_format((void *) addr)) { |
| #if defined(CONFIG_LEGACY_IMAGE_FORMAT) |
| case IMAGE_FORMAT_LEGACY: |
| hdr = (image_header_t *) addr; |
| |
| bootstage_mark(BOOTSTAGE_ID_IDE_FORMAT); |
| |
| if (!image_check_hcrc(hdr)) { |
| puts("\n** Bad Header Checksum **\n"); |
| bootstage_error(BOOTSTAGE_ID_IDE_CHECKSUM); |
| return 1; |
| } |
| bootstage_mark(BOOTSTAGE_ID_IDE_CHECKSUM); |
| |
| image_print_contents(hdr); |
| |
| cnt = image_get_image_size(hdr); |
| break; |
| #endif |
| #if CONFIG_IS_ENABLED(FIT) |
| case IMAGE_FORMAT_FIT: |
| fit_hdr = (const void *) addr; |
| puts("Fit image detected...\n"); |
| |
| cnt = fit_get_size(fit_hdr); |
| break; |
| #endif |
| default: |
| bootstage_error(BOOTSTAGE_ID_IDE_FORMAT); |
| puts("** Unknown image type\n"); |
| return 1; |
| } |
| |
| cnt += info.blksz - 1; |
| cnt /= info.blksz; |
| cnt -= 1; |
| |
| if (blk_dread(dev_desc, info.start + 1, cnt, |
| (ulong *)(addr + info.blksz)) != cnt) { |
| printf("** Read error on %d:%d\n", dev, part); |
| bootstage_error(BOOTSTAGE_ID_IDE_READ); |
| return 1; |
| } |
| bootstage_mark(BOOTSTAGE_ID_IDE_READ); |
| |
| #if CONFIG_IS_ENABLED(FIT) |
| /* This cannot be done earlier, |
| * we need complete FIT image in RAM first */ |
| if (genimg_get_format((void *) addr) == IMAGE_FORMAT_FIT) { |
| if (!fit_check_format(fit_hdr)) { |
| bootstage_error(BOOTSTAGE_ID_IDE_FIT_READ); |
| puts("** Bad FIT image format\n"); |
| return 1; |
| } |
| bootstage_mark(BOOTSTAGE_ID_IDE_FIT_READ_OK); |
| } |
| #endif |
| |
| flush_cache(addr, (cnt+1)*info.blksz); |
| |
| /* Loading ok, update default load address */ |
| image_load_addr = addr; |
| |
| return bootm_maybe_autostart(cmdtp, argv[0]); |
| } |