| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2011 Infineon Technologies |
| * |
| * Authors: |
| * Peter Huewe <huewe.external@infineon.com> |
| * |
| * Description: |
| * Device driver for TCG/TCPA TPM (trusted platform module). |
| * Specifications at www.trustedcomputinggroup.org |
| * |
| * This device driver implements the TPM interface as defined in |
| * the TCG TPM Interface Spec version 1.2, revision 1.0 and the |
| * Infineon I2C Protocol Stack Specification v0.20. |
| * |
| * It is based on the Linux kernel driver tpm.c from Leendert van |
| * Dorn, Dave Safford, Reiner Sailer, and Kyleen Hall. |
| * |
| * Version: 2.1.1 |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <fdtdec.h> |
| #include <i2c.h> |
| #include <log.h> |
| #include <tpm-v1.h> |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/compiler.h> |
| #include <linux/printk.h> |
| #include <linux/types.h> |
| #include <linux/unaligned/be_byteshift.h> |
| |
| #include "tpm_tis.h" |
| #include "tpm_internal.h" |
| |
| enum i2c_chip_type { |
| SLB9635, |
| SLB9645, |
| UNKNOWN, |
| }; |
| |
| /* expected value for DIDVID register */ |
| #define TPM_TIS_I2C_DID_VID_9635 0x000b15d1L |
| #define TPM_TIS_I2C_DID_VID_9645 0x001a15d1L |
| |
| static const char * const chip_name[] = { |
| [SLB9635] = "slb9635tt", |
| [SLB9645] = "slb9645tt", |
| [UNKNOWN] = "unknown/fallback to slb9635", |
| }; |
| |
| #define TPM_INFINEON_ACCESS(l) (0x0000 | ((l) << 4)) |
| #define TPM_INFINEON_STS(l) (0x0001 | ((l) << 4)) |
| #define TPM_INFINEON_DATA_FIFO(l) (0x0005 | ((l) << 4)) |
| #define TPM_INFINEON_DID_VID(l) (0x0006 | ((l) << 4)) |
| |
| /* |
| * tpm_tis_i2c_read() - read from TPM register |
| * @addr: register address to read from |
| * @buffer: provided by caller |
| * @len: number of bytes to read |
| * |
| * Read len bytes from TPM register and put them into |
| * buffer (little-endian format, i.e. first byte is put into buffer[0]). |
| * |
| * NOTE: TPM is big-endian for multi-byte values. Multi-byte |
| * values have to be swapped. |
| * |
| * Return -EIO on error, 0 on success. |
| */ |
| static int tpm_tis_i2c_read(struct udevice *dev, u8 addr, u8 *buffer, |
| size_t len) |
| { |
| struct tpm_chip *chip = dev_get_priv(dev); |
| int rc; |
| int count; |
| uint32_t addrbuf = addr; |
| |
| if ((chip->chip_type == SLB9635) || (chip->chip_type == UNKNOWN)) { |
| /* slb9635 protocol should work in both cases */ |
| for (count = 0; count < MAX_COUNT; count++) { |
| rc = dm_i2c_write(dev, 0, (uchar *)&addrbuf, 1); |
| if (rc == 0) |
| break; /* Success, break to skip sleep */ |
| udelay(SLEEP_DURATION_US); |
| } |
| if (rc) |
| return rc; |
| |
| /* After the TPM has successfully received the register address |
| * it needs some time, thus we're sleeping here again, before |
| * retrieving the data |
| */ |
| for (count = 0; count < MAX_COUNT; count++) { |
| udelay(SLEEP_DURATION_US); |
| rc = dm_i2c_read(dev, 0, buffer, len); |
| if (rc == 0) |
| break; /* success, break to skip sleep */ |
| } |
| } else { |
| /* |
| * Use a combined read for newer chips. |
| * Unfortunately the smbus functions are not suitable due to |
| * the 32 byte limit of the smbus. |
| * Retries should usually not be needed, but are kept just to |
| * be safe on the safe side. |
| */ |
| for (count = 0; count < MAX_COUNT; count++) { |
| rc = dm_i2c_read(dev, addr, buffer, len); |
| if (rc == 0) |
| break; /* break here to skip sleep */ |
| udelay(SLEEP_DURATION_US); |
| } |
| } |
| |
| /* Take care of 'guard time' */ |
| udelay(SLEEP_DURATION_US); |
| if (rc) |
| return rc; |
| |
| return 0; |
| } |
| |
| static int tpm_tis_i2c_write_generic(struct udevice *dev, u8 addr, |
| const u8 *buffer, size_t len, |
| unsigned int sleep_time_us, u8 max_count) |
| { |
| struct tpm_chip_priv *priv = dev_get_uclass_priv(dev); |
| struct tpm_chip *chip = dev_get_priv(dev); |
| int rc = 0; |
| int count; |
| |
| if (chip->chip_type == SLB9635) { |
| /* Prepare send buffer to include the address */ |
| priv->buf[0] = addr; |
| memcpy(&(priv->buf[1]), buffer, len); |
| buffer = priv->buf; |
| len++; |
| addr = 0; |
| } |
| |
| for (count = 0; count < max_count; count++) { |
| rc = dm_i2c_write(dev, addr, buffer, len); |
| if (rc == 0) |
| break; /* Success, break to skip sleep */ |
| udelay(sleep_time_us); |
| } |
| |
| /* take care of 'guard time' */ |
| udelay(sleep_time_us); |
| if (rc) |
| return rc; |
| |
| return 0; |
| } |
| |
| /* |
| * tpm_tis_i2c_write() - write to TPM register |
| * @addr: register address to write to |
| * @buffer: containing data to be written |
| * @len: number of bytes to write |
| * |
| * Write len bytes from provided buffer to TPM register (little |
| * endian format, i.e. buffer[0] is written as first byte). |
| * |
| * NOTE: TPM is big-endian for multi-byte values. Multi-byte |
| * values have to be swapped. |
| * |
| * NOTE: use this function instead of the tpm_tis_i2c_write_generic function. |
| * |
| * Return -EIO on error, 0 on success |
| */ |
| static int tpm_tis_i2c_write(struct udevice *dev, u8 addr, const u8 *buffer, |
| size_t len) |
| { |
| return tpm_tis_i2c_write_generic(dev, addr, buffer, len, |
| SLEEP_DURATION_US, MAX_COUNT); |
| } |
| |
| /* |
| * This function is needed especially for the cleanup situation after |
| * sending TPM_READY |
| */ |
| static int tpm_tis_i2c_write_long(struct udevice *dev, u8 addr, u8 *buffer, |
| size_t len) |
| { |
| return tpm_tis_i2c_write_generic(dev, addr, buffer, len, |
| SLEEP_DURATION_LONG_US, |
| MAX_COUNT_LONG); |
| } |
| |
| static int tpm_tis_i2c_check_locality(struct udevice *dev, int loc) |
| { |
| const u8 mask = TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID; |
| struct tpm_chip *chip = dev_get_priv(dev); |
| u8 buf; |
| int rc; |
| |
| rc = tpm_tis_i2c_read(dev, TPM_INFINEON_ACCESS(loc), &buf, 1); |
| if (rc < 0) |
| return rc; |
| |
| if ((buf & mask) == mask) { |
| chip->locality = loc; |
| return loc; |
| } |
| |
| return -ENOENT; |
| } |
| |
| static void tpm_tis_i2c_release_locality(struct udevice *dev, int loc, |
| int force) |
| { |
| const u8 mask = TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID; |
| u8 buf; |
| |
| if (tpm_tis_i2c_read(dev, TPM_INFINEON_ACCESS(loc), &buf, 1) < 0) |
| return; |
| |
| if (force || (buf & mask) == mask) { |
| buf = TPM_ACCESS_ACTIVE_LOCALITY; |
| tpm_tis_i2c_write(dev, TPM_INFINEON_ACCESS(loc), &buf, 1); |
| } |
| } |
| |
| static int tpm_tis_i2c_request_locality(struct udevice *dev, int loc) |
| { |
| struct tpm_chip *chip = dev_get_priv(dev); |
| unsigned long start, stop; |
| u8 buf = TPM_ACCESS_REQUEST_USE; |
| int rc; |
| |
| rc = tpm_tis_i2c_check_locality(dev, loc); |
| if (rc >= 0) { |
| debug("%s: Already have locality\n", __func__); |
| return loc; /* We already have the locality */ |
| } else if (rc != -ENOENT) { |
| debug("%s: Failed to get locality: %d\n", __func__, rc); |
| return rc; |
| } |
| |
| rc = tpm_tis_i2c_write(dev, TPM_INFINEON_ACCESS(loc), &buf, 1); |
| if (rc) { |
| debug("%s: Failed to write to TPM: %d\n", __func__, rc); |
| return rc; |
| } |
| |
| /* Wait for burstcount */ |
| start = get_timer(0); |
| stop = chip->timeout_a; |
| do { |
| rc = tpm_tis_i2c_check_locality(dev, loc); |
| if (rc >= 0) { |
| debug("%s: Have locality\n", __func__); |
| return loc; |
| } else if (rc != -ENOENT) { |
| debug("%s: Failed to get locality: %d\n", __func__, rc); |
| return rc; |
| } |
| mdelay(TPM_TIMEOUT_MS); |
| } while (get_timer(start) < stop); |
| debug("%s: Timeout getting locality: %d\n", __func__, rc); |
| |
| return rc; |
| } |
| |
| static u8 tpm_tis_i2c_status(struct udevice *dev) |
| { |
| struct tpm_chip *chip = dev_get_priv(dev); |
| /* NOTE: Since i2c read may fail, return 0 in this case --> time-out */ |
| u8 buf; |
| |
| if (tpm_tis_i2c_read(dev, TPM_INFINEON_STS(chip->locality), &buf, 1) < 0) |
| return 0; |
| else |
| return buf; |
| } |
| |
| static int tpm_tis_i2c_ready(struct udevice *dev) |
| { |
| struct tpm_chip *chip = dev_get_priv(dev); |
| int rc; |
| |
| /* This causes the current command to be aborted */ |
| u8 buf = TPM_STS_COMMAND_READY; |
| |
| debug("%s\n", __func__); |
| rc = tpm_tis_i2c_write_long(dev, TPM_INFINEON_STS(chip->locality), &buf, 1); |
| if (rc) |
| debug("%s: rc=%d\n", __func__, rc); |
| |
| return rc; |
| } |
| |
| static ssize_t tpm_tis_i2c_get_burstcount(struct udevice *dev) |
| { |
| struct tpm_chip *chip = dev_get_priv(dev); |
| unsigned long start, stop; |
| ssize_t burstcnt; |
| u8 addr, buf[3]; |
| |
| /* Wait for burstcount */ |
| /* XXX: Which timeout value? Spec has 2 answers (c & d) */ |
| start = get_timer(0); |
| stop = chip->timeout_d; |
| do { |
| /* Note: STS is little endian */ |
| addr = TPM_INFINEON_STS(chip->locality) + 1; |
| if (tpm_tis_i2c_read(dev, addr, buf, 3) < 0) |
| burstcnt = 0; |
| else |
| burstcnt = (buf[2] << 16) + (buf[1] << 8) + buf[0]; |
| |
| if (burstcnt) |
| return burstcnt; |
| mdelay(TPM_TIMEOUT_MS); |
| } while (get_timer(start) < stop); |
| |
| return -EBUSY; |
| } |
| |
| static int tpm_tis_i2c_wait_for_stat(struct udevice *dev, u8 mask, |
| unsigned long timeout, int *status) |
| { |
| unsigned long start, stop; |
| |
| /* Check current status */ |
| *status = tpm_tis_i2c_status(dev); |
| if ((*status & mask) == mask) |
| return 0; |
| |
| start = get_timer(0); |
| stop = timeout; |
| do { |
| mdelay(TPM_TIMEOUT_MS); |
| *status = tpm_tis_i2c_status(dev); |
| if ((*status & mask) == mask) |
| return 0; |
| } while (get_timer(start) < stop); |
| |
| return -ETIMEDOUT; |
| } |
| |
| static int tpm_tis_i2c_recv_data(struct udevice *dev, u8 *buf, size_t count) |
| { |
| struct tpm_chip *chip = dev_get_priv(dev); |
| size_t size = 0; |
| ssize_t burstcnt; |
| int rc; |
| |
| while (size < count) { |
| burstcnt = tpm_tis_i2c_get_burstcount(dev); |
| |
| /* burstcount < 0 -> tpm is busy */ |
| if (burstcnt < 0) |
| return burstcnt; |
| |
| /* Limit received data to max left */ |
| if (burstcnt > (count - size)) |
| burstcnt = count - size; |
| |
| rc = tpm_tis_i2c_read(dev, TPM_INFINEON_DATA_FIFO(chip->locality), |
| &(buf[size]), burstcnt); |
| if (rc == 0) |
| size += burstcnt; |
| } |
| |
| return size; |
| } |
| |
| static int tpm_tis_i2c_recv(struct udevice *dev, u8 *buf, size_t count) |
| { |
| struct tpm_chip *chip = dev_get_priv(dev); |
| int size = 0; |
| int status; |
| unsigned int expected; |
| int rc; |
| |
| status = tpm_tis_i2c_status(dev); |
| if (status == TPM_STS_COMMAND_READY) |
| return -EINTR; |
| if ((status & (TPM_STS_DATA_AVAIL | TPM_STS_VALID)) != |
| (TPM_STS_DATA_AVAIL | TPM_STS_VALID)) |
| return -EAGAIN; |
| |
| debug("...got it;\n"); |
| |
| /* Read first 10 bytes, including tag, paramsize, and result */ |
| size = tpm_tis_i2c_recv_data(dev, buf, TPM_HEADER_SIZE); |
| if (size < TPM_HEADER_SIZE) { |
| debug("Unable to read header\n"); |
| return size < 0 ? size : -EIO; |
| } |
| |
| expected = get_unaligned_be32(buf + TPM_RSP_SIZE_BYTE); |
| if ((size_t)expected > count || (size_t)expected < TPM_HEADER_SIZE) { |
| debug("Error size=%x, expected=%x, count=%x\n", size, expected, |
| count); |
| return -ENOSPC; |
| } |
| |
| size += tpm_tis_i2c_recv_data(dev, &buf[TPM_HEADER_SIZE], |
| expected - TPM_HEADER_SIZE); |
| if (size < expected) { |
| debug("Unable to read remainder of result\n"); |
| return -ETIMEDOUT; |
| } |
| |
| rc = tpm_tis_i2c_wait_for_stat(dev, TPM_STS_VALID, chip->timeout_c, |
| &status); |
| if (rc) |
| return rc; |
| if (status & TPM_STS_DATA_AVAIL) { /* Retry? */ |
| debug("Error left over data\n"); |
| return -EIO; |
| } |
| |
| return size; |
| } |
| |
| static int tpm_tis_i2c_send(struct udevice *dev, const u8 *buf, size_t len) |
| { |
| struct tpm_chip *chip = dev_get_priv(dev); |
| int rc, status; |
| size_t burstcnt; |
| size_t count = 0; |
| int retry = 0; |
| u8 sts = TPM_STS_GO; |
| |
| debug("%s: len=%d\n", __func__, len); |
| if (len > TPM_DEV_BUFSIZE) |
| return -E2BIG; /* Command is too long for our tpm, sorry */ |
| |
| if (tpm_tis_i2c_request_locality(dev, 0) < 0) |
| return -EBUSY; |
| |
| status = tpm_tis_i2c_status(dev); |
| if ((status & TPM_STS_COMMAND_READY) == 0) { |
| rc = tpm_tis_i2c_ready(dev); |
| if (rc) |
| return rc; |
| rc = tpm_tis_i2c_wait_for_stat(dev, TPM_STS_COMMAND_READY, |
| chip->timeout_b, &status); |
| if (rc) |
| return rc; |
| } |
| |
| burstcnt = tpm_tis_i2c_get_burstcount(dev); |
| |
| /* burstcount < 0 -> tpm is busy */ |
| if (burstcnt < 0) |
| return burstcnt; |
| |
| while (count < len) { |
| udelay(300); |
| if (burstcnt > len - count) |
| burstcnt = len - count; |
| |
| #ifdef CONFIG_TPM_TIS_I2C_BURST_LIMITATION |
| if (retry && burstcnt > CONFIG_TPM_TIS_I2C_BURST_LIMITATION_LEN) |
| burstcnt = CONFIG_TPM_TIS_I2C_BURST_LIMITATION_LEN; |
| #endif /* CONFIG_TPM_TIS_I2C_BURST_LIMITATION */ |
| |
| rc = tpm_tis_i2c_write(dev, TPM_INFINEON_DATA_FIFO(chip->locality), |
| &(buf[count]), burstcnt); |
| if (rc == 0) |
| count += burstcnt; |
| else { |
| debug("%s: error\n", __func__); |
| if (retry++ > 10) |
| return -EIO; |
| rc = tpm_tis_i2c_wait_for_stat(dev, TPM_STS_VALID, |
| chip->timeout_c, |
| &status); |
| if (rc) |
| return rc; |
| |
| if ((status & TPM_STS_DATA_EXPECT) == 0) |
| return -EIO; |
| } |
| } |
| |
| /* Go and do it */ |
| rc = tpm_tis_i2c_write(dev, TPM_INFINEON_STS(chip->locality), &sts, 1); |
| if (rc < 0) |
| return rc; |
| debug("%s: done, rc=%d\n", __func__, rc); |
| |
| return len; |
| } |
| |
| static int tpm_tis_i2c_cleanup(struct udevice *dev) |
| { |
| struct tpm_chip *chip = dev_get_priv(dev); |
| |
| tpm_tis_i2c_ready(dev); |
| /* |
| * The TPM needs some time to clean up here, |
| * so we sleep rather than keeping the bus busy |
| */ |
| mdelay(2); |
| tpm_tis_i2c_release_locality(dev, chip->locality, 0); |
| |
| return 0; |
| } |
| |
| static int tpm_tis_i2c_init(struct udevice *dev) |
| { |
| struct tpm_chip *chip = dev_get_priv(dev); |
| u32 vendor; |
| u32 expected_did_vid; |
| int rc; |
| |
| chip->is_open = 1; |
| |
| /* Default timeouts - these could move to the device tree */ |
| chip->timeout_a = TIS_SHORT_TIMEOUT_MS; |
| chip->timeout_b = TIS_LONG_TIMEOUT_MS; |
| chip->timeout_c = TIS_SHORT_TIMEOUT_MS; |
| chip->timeout_d = TIS_SHORT_TIMEOUT_MS; |
| |
| rc = tpm_tis_i2c_request_locality(dev, 0); |
| if (rc < 0) |
| return rc; |
| |
| /* Read four bytes from DID_VID register */ |
| if (tpm_tis_i2c_read(dev, TPM_INFINEON_DID_VID(0), (uchar *)&vendor, 4) < 0) { |
| tpm_tis_i2c_release_locality(dev, 0, 1); |
| return -EIO; |
| } |
| |
| if (chip->chip_type == SLB9635) { |
| vendor = be32_to_cpu(vendor); |
| expected_did_vid = TPM_TIS_I2C_DID_VID_9635; |
| } else { |
| /* device id and byte order has changed for newer i2c tpms */ |
| expected_did_vid = TPM_TIS_I2C_DID_VID_9645; |
| } |
| |
| if (chip->chip_type != UNKNOWN && vendor != expected_did_vid) { |
| pr_err("Vendor id did not match! ID was %08x\n", vendor); |
| return -ENODEV; |
| } |
| |
| chip->vend_dev = vendor; |
| debug("1.2 TPM (chip type %s device-id 0x%X)\n", |
| chip_name[chip->chip_type], vendor >> 16); |
| |
| /* |
| * A timeout query to TPM can be placed here. |
| * Standard timeout values are used so far |
| */ |
| |
| return 0; |
| } |
| |
| static int tpm_tis_i2c_open(struct udevice *dev) |
| { |
| struct tpm_chip *chip = dev_get_priv(dev); |
| int rc; |
| |
| debug("%s: start\n", __func__); |
| if (chip->is_open) |
| return -EBUSY; |
| rc = tpm_tis_i2c_init(dev); |
| if (rc < 0) |
| chip->is_open = 0; |
| |
| return rc; |
| } |
| |
| static int tpm_tis_i2c_close(struct udevice *dev) |
| { |
| struct tpm_chip *chip = dev_get_priv(dev); |
| |
| if (chip->is_open) { |
| tpm_tis_i2c_release_locality(dev, chip->locality, 1); |
| chip->is_open = 0; |
| chip->vend_dev = 0; |
| } |
| |
| return 0; |
| } |
| |
| static int tpm_tis_i2c_get_desc(struct udevice *dev, char *buf, int size) |
| { |
| struct tpm_chip *chip = dev_get_priv(dev); |
| |
| if (size < 50) |
| return -ENOSPC; |
| |
| return snprintf(buf, size, "1.2 TPM (%s, chip type %s device-id 0x%x)", |
| chip->is_open ? "open" : "closed", |
| chip_name[chip->chip_type], |
| chip->vend_dev >> 16); |
| } |
| |
| static int tpm_tis_i2c_probe(struct udevice *dev) |
| { |
| struct tpm_chip_priv *uc_priv = dev_get_uclass_priv(dev); |
| struct tpm_chip *chip = dev_get_priv(dev); |
| |
| chip->chip_type = dev_get_driver_data(dev); |
| |
| /* TODO: These need to be checked and tuned */ |
| uc_priv->duration_ms[TPM_SHORT] = TIS_SHORT_TIMEOUT_MS; |
| uc_priv->duration_ms[TPM_MEDIUM] = TIS_LONG_TIMEOUT_MS; |
| uc_priv->duration_ms[TPM_LONG] = TIS_LONG_TIMEOUT_MS; |
| uc_priv->retry_time_ms = TPM_TIMEOUT_MS; |
| |
| return 0; |
| } |
| |
| static const struct tpm_ops tpm_tis_i2c_ops = { |
| .open = tpm_tis_i2c_open, |
| .close = tpm_tis_i2c_close, |
| .get_desc = tpm_tis_i2c_get_desc, |
| .send = tpm_tis_i2c_send, |
| .recv = tpm_tis_i2c_recv, |
| .cleanup = tpm_tis_i2c_cleanup, |
| }; |
| |
| static const struct udevice_id tpm_tis_i2c_ids[] = { |
| { .compatible = "infineon,slb9635tt", .data = SLB9635 }, |
| { .compatible = "infineon,slb9645tt", .data = SLB9645 }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(tpm_tis_i2c) = { |
| .name = "tpm_tis_infineon", |
| .id = UCLASS_TPM, |
| .of_match = tpm_tis_i2c_ids, |
| .ops = &tpm_tis_i2c_ops, |
| .probe = tpm_tis_i2c_probe, |
| .priv_auto = sizeof(struct tpm_chip), |
| }; |