| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2017 Marek Vasut <marek.vasut@gmail.com> |
| */ |
| |
| #include <common.h> |
| #include <clk.h> |
| #include <dm.h> |
| #include <malloc.h> |
| #include <asm/global_data.h> |
| #include <dm/device_compat.h> |
| #include <dm/pinctrl.h> |
| #include <errno.h> |
| #include <asm/gpio.h> |
| #include <asm/io.h> |
| #include <linux/bitops.h> |
| #include "../pinctrl/renesas/sh_pfc.h" |
| |
| #define GPIO_IOINTSEL 0x00 /* General IO/Interrupt Switching Register */ |
| #define GPIO_INOUTSEL 0x04 /* General Input/Output Switching Register */ |
| #define GPIO_OUTDT 0x08 /* General Output Register */ |
| #define GPIO_INDT 0x0c /* General Input Register */ |
| #define GPIO_INTDT 0x10 /* Interrupt Display Register */ |
| #define GPIO_INTCLR 0x14 /* Interrupt Clear Register */ |
| #define GPIO_INTMSK 0x18 /* Interrupt Mask Register */ |
| #define GPIO_MSKCLR 0x1c /* Interrupt Mask Clear Register */ |
| #define GPIO_POSNEG 0x20 /* Positive/Negative Logic Select Register */ |
| #define GPIO_EDGLEVEL 0x24 /* Edge/level Select Register */ |
| #define GPIO_FILONOFF 0x28 /* Chattering Prevention On/Off Register */ |
| #define GPIO_BOTHEDGE 0x4c /* One Edge/Both Edge Select Register */ |
| #define GPIO_INEN 0x50 /* General Input Enable Register */ |
| |
| #define RCAR_MAX_GPIO_PER_BANK 32 |
| |
| #define RCAR_GPIO_HAS_INEN BIT(0) |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| struct rcar_gpio_priv { |
| void __iomem *regs; |
| u32 quirks; |
| int pfc_offset; |
| }; |
| |
| static int rcar_gpio_get_value(struct udevice *dev, unsigned offset) |
| { |
| struct rcar_gpio_priv *priv = dev_get_priv(dev); |
| const u32 bit = BIT(offset); |
| |
| /* |
| * Testing on r8a7790 shows that INDT does not show correct pin state |
| * when configured as output, so use OUTDT in case of output pins. |
| */ |
| if (readl(priv->regs + GPIO_INOUTSEL) & bit) |
| return !!(readl(priv->regs + GPIO_OUTDT) & bit); |
| else |
| return !!(readl(priv->regs + GPIO_INDT) & bit); |
| } |
| |
| static int rcar_gpio_set_value(struct udevice *dev, unsigned offset, |
| int value) |
| { |
| struct rcar_gpio_priv *priv = dev_get_priv(dev); |
| |
| if (value) |
| setbits_le32(priv->regs + GPIO_OUTDT, BIT(offset)); |
| else |
| clrbits_le32(priv->regs + GPIO_OUTDT, BIT(offset)); |
| |
| return 0; |
| } |
| |
| static void rcar_gpio_set_direction(struct udevice *dev, unsigned offset, |
| bool output) |
| { |
| struct rcar_gpio_priv *priv = dev_get_priv(dev); |
| void __iomem *regs = priv->regs; |
| |
| /* |
| * follow steps in the GPIO documentation for |
| * "Setting General Output Mode" and |
| * "Setting General Input Mode" |
| */ |
| |
| /* Configure postive logic in POSNEG */ |
| clrbits_le32(regs + GPIO_POSNEG, BIT(offset)); |
| |
| /* Select "Input Enable/Disable" in INEN */ |
| if (priv->quirks & RCAR_GPIO_HAS_INEN) { |
| if (output) |
| clrbits_le32(regs + GPIO_INEN, BIT(offset)); |
| else |
| setbits_le32(regs + GPIO_INEN, BIT(offset)); |
| } |
| |
| /* Select "General Input/Output Mode" in IOINTSEL */ |
| clrbits_le32(regs + GPIO_IOINTSEL, BIT(offset)); |
| |
| /* Select Input Mode or Output Mode in INOUTSEL */ |
| if (output) |
| setbits_le32(regs + GPIO_INOUTSEL, BIT(offset)); |
| else |
| clrbits_le32(regs + GPIO_INOUTSEL, BIT(offset)); |
| } |
| |
| static int rcar_gpio_direction_input(struct udevice *dev, unsigned offset) |
| { |
| rcar_gpio_set_direction(dev, offset, false); |
| |
| return 0; |
| } |
| |
| static int rcar_gpio_direction_output(struct udevice *dev, unsigned offset, |
| int value) |
| { |
| /* write GPIO value to output before selecting output mode of pin */ |
| rcar_gpio_set_value(dev, offset, value); |
| rcar_gpio_set_direction(dev, offset, true); |
| |
| return 0; |
| } |
| |
| static int rcar_gpio_get_function(struct udevice *dev, unsigned offset) |
| { |
| struct rcar_gpio_priv *priv = dev_get_priv(dev); |
| |
| if (readl(priv->regs + GPIO_INOUTSEL) & BIT(offset)) |
| return GPIOF_OUTPUT; |
| else |
| return GPIOF_INPUT; |
| } |
| |
| static const struct dm_gpio_ops rcar_gpio_ops = { |
| .request = pinctrl_gpio_request, |
| .rfree = pinctrl_gpio_free, |
| .direction_input = rcar_gpio_direction_input, |
| .direction_output = rcar_gpio_direction_output, |
| .get_value = rcar_gpio_get_value, |
| .set_value = rcar_gpio_set_value, |
| .get_function = rcar_gpio_get_function, |
| }; |
| |
| static int rcar_gpio_probe(struct udevice *dev) |
| { |
| struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| struct rcar_gpio_priv *priv = dev_get_priv(dev); |
| struct fdtdec_phandle_args args; |
| struct clk clk; |
| int node = dev_of_offset(dev); |
| int ret; |
| |
| priv->regs = dev_read_addr_ptr(dev); |
| priv->quirks = dev_get_driver_data(dev); |
| uc_priv->bank_name = dev->name; |
| |
| ret = fdtdec_parse_phandle_with_args(gd->fdt_blob, node, "gpio-ranges", |
| NULL, 3, 0, &args); |
| priv->pfc_offset = ret == 0 ? args.args[1] : -1; |
| uc_priv->gpio_count = ret == 0 ? args.args[2] : RCAR_MAX_GPIO_PER_BANK; |
| |
| ret = clk_get_by_index(dev, 0, &clk); |
| if (ret < 0) { |
| dev_err(dev, "Failed to get GPIO bank clock\n"); |
| return ret; |
| } |
| |
| ret = clk_enable(&clk); |
| clk_free(&clk); |
| if (ret) { |
| dev_err(dev, "Failed to enable GPIO bank clock\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct udevice_id rcar_gpio_ids[] = { |
| { .compatible = "renesas,gpio-r8a7795" }, |
| { .compatible = "renesas,gpio-r8a7796" }, |
| { .compatible = "renesas,gpio-r8a77965" }, |
| { .compatible = "renesas,gpio-r8a77970" }, |
| { .compatible = "renesas,gpio-r8a77990" }, |
| { .compatible = "renesas,gpio-r8a77995" }, |
| { .compatible = "renesas,gpio-r8a779a0", .data = RCAR_GPIO_HAS_INEN }, |
| { .compatible = "renesas,rcar-gen2-gpio" }, |
| { .compatible = "renesas,rcar-gen3-gpio" }, |
| { .compatible = "renesas,rcar-gen4-gpio", .data = RCAR_GPIO_HAS_INEN }, |
| { /* sentinel */ } |
| }; |
| |
| U_BOOT_DRIVER(rcar_gpio) = { |
| .name = "rcar-gpio", |
| .id = UCLASS_GPIO, |
| .of_match = rcar_gpio_ids, |
| .ops = &rcar_gpio_ops, |
| .priv_auto = sizeof(struct rcar_gpio_priv), |
| .probe = rcar_gpio_probe, |
| }; |