| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Based on the linux multiplexer framework |
| * |
| * At its core, a multiplexer (or mux), also known as a data selector, is a |
| * device that selects between several analog or digital input signals and |
| * forwards it to a single output line. This notion can be extended to work |
| * with buses, like a I2C bus multiplexer for example. |
| * |
| * Copyright (C) 2017 Axentia Technologies AB |
| * Author: Peter Rosin <peda@axentia.se> |
| * |
| * Copyright (C) 2017-2018 Texas Instruments Incorporated - https://www.ti.com/ |
| * Jean-Jacques Hiblot <jjhiblot@ti.com> |
| */ |
| |
| #ifndef _MUX_H_ |
| #define _MUX_H_ |
| |
| #include <linux/errno.h> |
| #include <linux/types.h> |
| |
| struct udevice; |
| struct mux_control; |
| |
| #if IS_ENABLED(CONFIG_MULTIPLEXER) |
| /** |
| * mux_control_states() - Query the number of multiplexer states. |
| * @mux: The mux-control to query. |
| * |
| * Return: The number of multiplexer states. |
| */ |
| unsigned int mux_control_states(struct mux_control *mux); |
| |
| /** |
| * mux_control_select() - Select the given multiplexer state. |
| * @mux: The mux-control to request a change of state from. |
| * @state: The new requested state. |
| * |
| * On successfully selecting the mux-control state, it will be locked until |
| * there is a call to mux_control_deselect(). If the mux-control is already |
| * selected when mux_control_select() is called, the function will indicate |
| * -EBUSY |
| * |
| * Therefore, make sure to call mux_control_deselect() when the operation is |
| * complete and the mux-control is free for others to use, but do not call |
| * mux_control_deselect() if mux_control_select() fails. |
| * |
| * Return: 0 when the mux-control state has the requested state or a negative |
| * errno on error. |
| */ |
| int __must_check mux_control_select(struct mux_control *mux, |
| unsigned int state); |
| #define mux_control_try_select(mux, state) mux_control_select(mux, state) |
| |
| /** |
| * mux_control_deselect() - Deselect the previously selected multiplexer state. |
| * @mux: The mux-control to deselect. |
| * |
| * It is required that a single call is made to mux_control_deselect() for |
| * each and every successful call made to either of mux_control_select() or |
| * mux_control_try_select(). |
| * |
| * Return: 0 on success and a negative errno on error. An error can only |
| * occur if the mux has an idle state. Note that even if an error occurs, the |
| * mux-control is unlocked and is thus free for the next access. |
| */ |
| int mux_control_deselect(struct mux_control *mux); |
| |
| /** |
| * mux_get_by_index() = Get a mux by integer index. |
| * @dev: The client device. |
| * @index: The index of the mux to get. |
| * @mux: A pointer to the 'mux_control' struct to initialize. |
| * |
| * This looks up and initializes a mux. The index is relative to the client |
| * device. |
| * |
| * Return: 0 if OK, or a negative error code. |
| */ |
| int mux_get_by_index(struct udevice *dev, int index, struct mux_control **mux); |
| |
| /** |
| * mux_control_get() - Get the mux-control for a device. |
| * @dev: The device that needs a mux-control. |
| * @mux_name: The name identifying the mux-control. |
| * @mux: A pointer to the mux-control pointer. |
| * |
| * Return: 0 of OK, or a negative error code. |
| */ |
| int mux_control_get(struct udevice *dev, const char *name, |
| struct mux_control **mux); |
| |
| /** |
| * mux_control_put() - Put away the mux-control for good. |
| * @mux: The mux-control to put away. |
| * |
| * mux_control_put() reverses the effects of mux_control_get(). |
| */ |
| void mux_control_put(struct mux_control *mux); |
| |
| /** |
| * devm_mux_control_get() - Get the mux-control for a device, with resource |
| * management. |
| * @dev: The device that needs a mux-control. |
| * @mux_name: The name identifying the mux-control. |
| * |
| * Return: Pointer to the mux-control, or an ERR_PTR with a negative errno. |
| */ |
| struct mux_control *devm_mux_control_get(struct udevice *dev, |
| const char *mux_name); |
| /** |
| * dm_mux_init() - Initialize the multiplexer controls to their default state. |
| * |
| * Return: 0 if OK, -errno otherwise. |
| */ |
| int dm_mux_init(void); |
| |
| #else |
| unsigned int mux_control_states(struct mux_control *mux) |
| { |
| return -ENOSYS; |
| } |
| |
| int __must_check mux_control_select(struct mux_control *mux, |
| unsigned int state) |
| { |
| return -ENOSYS; |
| } |
| |
| #define mux_control_try_select(mux, state) mux_control_select(mux, state) |
| |
| int mux_control_deselect(struct mux_control *mux) |
| { |
| return -ENOSYS; |
| } |
| |
| struct mux_control *mux_control_get(struct udevice *dev, const char *mux_name) |
| { |
| return NULL; |
| } |
| |
| void mux_control_put(struct mux_control *mux) |
| { |
| } |
| |
| struct mux_control *devm_mux_control_get(struct udevice *dev, |
| const char *mux_name) |
| { |
| return NULL; |
| } |
| |
| int dm_mux_init(void) |
| { |
| return -ENOSYS; |
| } |
| #endif |
| |
| #endif |